Fuji Film 02000004 DIGITAL CAMERA User Manual 00 LX23 OM 200 EN 01 indb

Fuji Film Corporation DIGITAL CAMERA 00 LX23 OM 200 EN 01 indb

05 (Short-Term Confidential) User Manual

Download: Fuji Film 02000004 DIGITAL CAMERA User Manual  00 LX23 OM 200 EN 01 indb
Mirror Download [FCC.gov]Fuji Film 02000004 DIGITAL CAMERA User Manual  00 LX23 OM 200 EN 01 indb
Document ID3548149
Application ID24aNrpeSTE/D4rn3TgOV9g==
Document Description05 (Short-Term Confidential) User Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize359.97kB (4499656 bits)
Date Submitted2017-09-07 00:00:00
Date Available2017-09-10 00:00:00
Creation Date2017-07-25 13:55:50
Producing SoftwareAcrobat Distiller 9.5.5 (Windows)
Document Lastmod2017-07-25 13:55:50
Document Title$00 LX23_OM_200-EN_01.indb
Document CreatorAdobe InDesign CS6 (Windows)
Document Author: S01-15

Owner’s Manual
BL00004927-200 EN
Introduction
Thank you for your purchase of this product.
Be sure that you have read this manual and understood its contents before using the camera.
Keep the manual where it will be read by all
who use the product.
For the Latest Information
The latest versions of the manuals are available from:
http://fujifilm-dsc.com/en/manual/
The site can be accessed not only
from your computer but also from
smartphones and tablets.
For information on firmware updates, visit:
http://www.fujifilm.com/support/digital_cameras/software/
fujifilm firmware
ii
P Chapter Index
Menu List
1 Before You Begin
iv
2 First Steps
27
3 Basic Photography and Playback
47
4 Movie Recording and Playback
53
5 Taking Photographs
61
6 The Shooting Menus
113
7 Playback and the Playback Menu
173
8 The Setup Menus
201
9 Shortcuts
245
10 Peripherals and Optional Accessories
259
11 Connections
281
12 Technical Notes
293
iii
Menu List
Camera menu options are listed below.
Menu List
Shooting Menus
Adjust settings when shooting photos or movies.
N See page 113 for details.
H IMAGE QUALITY SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
SIMULATION
1⁄3 FILM
GRAIN EFFECT
DYNAMIC RANGE
WHITE BALANCE
HIGHLIGHT TONE
SHADOW TONE
COLOR
SHARPNESS
NOISE REDUCTION
2⁄3 LONG EXPOSURE NR
LENS MODULATION
OPTIMIZER
COLOR SPACE
PIXEL MAPPING
SELECT CUSTOM SETTING
3⁄3 EDIT/SAVE CUSTOM
SETTING
iv
P G AF/MF SETTING
115
FOCUS AREA
133
116
AF MODE
134
117
AF-C CUSTOM SETTINGS 135
118
STORE AF MODE BY
136
120 1⁄3 ORIENTATION
121
AF POINT DISPLAY yz 136
122
NUMBER OF FOCUS POINTS 137
126
PRE-AF
137
126
AF-ILLUMINATOR
138
127
FACE/EYE DETECTION
139
127
SETTING
128
AF+MF
141
128
MF ASSIST
142
143
129 2⁄3 FOCUS CHECK
INTERLOCK SPOT AE &
143
129
FOCUS AREA
130
INSTANT AF SETTING
144
131
DEPTH-OF-FIELD SCALE 144
RELEASE/FOCUS PRIORITY 145
131
3⁄3 TOUCH SCREEN MODE
146
Menu List
P F FLASH SETTING
149
151
152
154
154
155
156
157
158
161
163
164
165
166
167
167
168
FLASH FUNCTION SETTING
RED EYE REMOVAL
TTL-LOCK MODE
LED LIGHT SETTING
MASTER SETTING
CH SETTING
B MOVIE SETTING
MOVIE MODE
MOVIE AF MODE
HDMI OUTPUT INFO DISPLAY
4K MOVIE OUTPUT
HDMI REC CONTROL
MIC LEVEL ADJUSTMENT
MIC/REMOTE RELEASE
169
170
170
171
171
172
172
The Playback Menu
Adjust playback settings.
N See page 180 for details.
C PLAY BACK MENU
RAW CONVERSION
ERASE
CROP
1⁄2 RESIZE
PROTECT
IMAGE ROTATE
RED EYE REMOVAL
VOICE MEMO SETTING
P C PLAY BACK MENU
180
IMAGE TRANSFER ORDER
183
WIRELESS
186
COMMUNICATION
187
SLIDE SHOW
188 2⁄2 PHOTOBOOK ASSIST
189
PC AUTO SAVE
190
PRINT ORDER (DPOF)
191
instax PRINTER PRINT
DISP ASPECT
192
193
193
194
196
197
199
200
Menu List
A SHOOTING SETTING
SCENE POSITION
SELF-TIMER
INTERVAL TIMER
SHOOTING
1⁄2 AE BKT SETTING
FILM SIMULATION BKT
PHOTOMETRY
SHUTTER TYPE
IS MODE
ISO
ADAPTOR SETTING
2⁄2 MOUNT
WIRELESS
COMMUNICATION
Setup Menus
Adjust basic camera settings.
Menu List
N See page 201 for details.
D USER SETTING
FORMAT
DATE/TIME
TIME DIFFERENCE
MY MENU SETTING
SENSOR CLEANING
RESET
D SOUND SETTING
AF BEEP VOL.
SELF-TIMER BEEP VOL.
OPERATION VOL.
SHUTTER VOLUME
SHUTTER SOUND
PLAYBACK VOLUME
vi
P D SCREEN SETTING
EVF BRIGHTNESS
203
EVF COLOR
204
LCD BRIGHTNESS
205
206
LCD COLOR
206 1⁄2 IMAGE DISP.
208
AUTOROTATE DISPLAYS
209
PREVIEW EXP./WB IN
MANUAL MODE
PREVIEW PIC. EFFECT
210
FRAMING GUIDELINE
211
211 2⁄2 AUTOROTATE PB
FOCUS SCALE UNITS
212
DISP. CUSTOM SETTING
212
213
214
215
215
216
216
217
217
218
219
220
220
221
Menu List
P D POWER MANAGEMENT
223
224
226
228
228
229
229
230
230
231
231
232
232
233
AUTO POWER OFF
234
PERFORMANCE
235
D SAVE DATA SETTING
FRAME NO.
237
SAVE ORG IMAGE
238
EDIT FILE NAME
238
COPYRIGHT INFO
239
D CONNECTION SETTING
Bluetooth SETTINGS
241
PC AUTO SAVE SETTINGS
242
instax PRINTER CONNECTION 242
SETTING
GENERAL SETTINGS
243
INFORMATION
244
RESET WIRELESS SETTING
244
vii
Menu List
D BUTTON/DIAL SETTING
FOCUS LEVER SETTING
EDIT/SAVE QUICK MENU
FUNCTION (Fn) SETTING
COMMAND DIAL SETTING
1⁄2 o S.S. OPERATION
ISO COMMAND DIAL
SETTING
SHUTTER AF
SHUTTER AE
SHOOT WITHOUT LENS
SHOOT WITHOUT CARD
RING
2⁄2 FOCUS
AE/AF-LOCK MODE
APERTURE SETTING
TOUCH SCREEN SETTING
P Table of Contents
Introduction ................................................................................. ii
For the Latest Information..............................................................ii
Menu List...................................................................................... iv
Shooting Menus ................................................................................. iv
The Playback Menu ........................................................................... v
Setup Menus......................................................................................... vi
Supplied Accessories ............................................................. xix
About This Manual................................................................... xx
Symbols and Conventions ..........................................................xx
Terminology .........................................................................................xx
1 Before You Begin
Parts of the Camera ................................................................... 2
The Serial Number Plate ................................................................. 4
The Focus Stick (Focus Lever) ...................................................... 4
The Shutter Speed Dial.................................................................... 5
The Exposure Compensation Dial ............................................ 5
The DRIVE Button ................................................................................ 6
The Auto Mode Selector Lever ................................................... 7
The Command Dials ......................................................................... 8
The Indicator Lamp ........................................................................ 10
The LCD Monitor .............................................................................. 11
Focusing the Viewfinder .............................................................. 11
Camera Displays .......................................................................12
Electronic Viewfinder/LCD Monitor ...................................... 12
Choosing a Display Mode .......................................................... 14
viii
Table of Contents
Adjusting Display Brightness and Color ............................ 15
Display Rotation................................................................................ 15
The DISP/BACK Button ................................................................. 16
Customizing the Standard Display ....................................... 17
Using the Menus ......................................................................20
Touch Screen Mode.................................................................22
Shooting Touch Controls ............................................................ 22
Playback Touch Controls ............................................................. 25
2 First Steps
27
Attaching the Strap .................................................................28
Attaching a Lens .......................................................................30
Charging the Battery ..............................................................32
Inserting Batteries and Memory Cards ............................36
Compatible Memory Cards ....................................................... 40
Turning the Camera On and Off .........................................42
Checking the Battery Level...................................................43
Basic Setup .................................................................................44
Choosing a Different Language.............................................. 46
Changing the Time and Date ................................................... 46
3 Basic Photography and Playback
47
Taking Photographs (Mode P) .............................................48
a Viewing Pictures .................................................................51
b Deleting Pictures .................................................................52
ix
4 Movie Recording and Playback
53
F Recording Movies ..............................................................54
Adjusting Movie Settings............................................................ 57
a Viewing Movies...................................................................58
5 Taking Photographs
61
Choosing a Shooting Mode .................................................62
Mode P: Program AE ...................................................................... 62
Mode S: Shutter-Priority AE ....................................................... 64
Mode A: Aperture-Priority AE ................................................... 69
Mode M: Manual Exposure ........................................................ 72
Auto Mode ........................................................................................... 74
Autofocus....................................................................................77
Focus Mode ......................................................................................... 78
Autofocus Options (AF Mode) ................................................. 80
Focus-Point Selection.................................................................... 82
Manual Focus.............................................................................87
Checking Focus................................................................................. 89
d Exposure Compensation.................................................91
C (Custom) ........................................................................................... 91
Focus/Exposure Lock ..............................................................92
The AF-L and AE-L Buttons ........................................................ 93
BKT Bracketing............................................................................94
O AE BKT ............................................................................................. 95
W ISO BKT .......................................................................................... 95
X FILM SIMULATION BKT......................................................... 95
V WHITE BALANCE BKT ............................................................ 96
Y DYNAMIC RANGE BKT.......................................................... 96
Table of Contents
I Continuous Shooting (Burst Mode) ............................97
Y Advanced Filters ................................................................99
Advanced Filter Options ............................................................100
j Multiple Exposures ......................................................... 101
u Panoramas ........................................................................ 103
Flash Photography................................................................ 107
Flash Settings ...................................................................................109
6 The Shooting Menus
113
H IMAGE QUALITY SETTING ............................................. 114
IMAGE SIZE .........................................................................................115
IMAGE QUALITY ..............................................................................116
RAW RECORDING ...........................................................................117
FILM SIMULATION ..........................................................................118
GRAIN EFFECT ..................................................................................120
DYNAMIC RANGE ...........................................................................121
WHITE BALANCE .............................................................................122
HIGHLIGHT TONE ...........................................................................126
SHADOW TONE ...............................................................................126
COLOR ...................................................................................................127
SHARPNESS ........................................................................................127
NOISE REDUCTION ........................................................................128
LONG EXPOSURE NR ....................................................................128
LENS MODULATION OPTIMIZER ...........................................129
COLOR SPACE ...................................................................................129
PIXEL MAPPING ...............................................................................130
SELECT CUSTOM SETTING........................................................131
EDIT/SAVE CUSTOM SETTING .................................................131
xi
G AF/MF SETTING ................................................................ 133
FOCUS AREA .....................................................................................133
AF MODE .............................................................................................134
AF-C CUSTOM SETTINGS...........................................................135
STORE AF MODE BY ORIENTATION ......................................136
AF POINT DISPLAY yz.........................................................136
NUMBER OF FOCUS POINTS ...................................................137
PRE-AF...................................................................................................137
AF ILLUMINATOR ............................................................................138
FACE/EYE DETECTION SETTING ............................................139
AF+MF ..................................................................................................141
MF ASSIST ...........................................................................................142
FOCUS CHECK ..................................................................................143
INTERLOCK SPOT AE & FOCUS AREA..................................143
INSTANT AF SETTING ...................................................................144
DEPTH-OF-FIELD SCALE.............................................................144
RELEASE/FOCUS PRIORITY .......................................................145
TOUCH SCREEN MODE ...............................................................146
A SHOOTING SETTING ........................................................ 149
SCENE POSITION.............................................................................149
SELF-TIMER .........................................................................................151
INTERVAL TIMER SHOOTING ....................................................152
AE BKT SETTING ..............................................................................154
FILM SIMULATION BKT ................................................................154
PHOTOMETRY...................................................................................155
SHUTTER TYPE .................................................................................156
IS MODE ...............................................................................................157
ISO ...........................................................................................................158
xii
Table of Contents
MOUNT ADAPTOR SETTING ....................................................161
WIRELESS COMMUNICATION .................................................163
F FLASH SETTING................................................................. 164
FLASH FUNCTION SETTING .....................................................164
RED EYE REMOVAL ........................................................................165
TTL-LOCK MODE .............................................................................166
LED LIGHT SETTING ......................................................................167
MASTER SETTING ...........................................................................167
CH SETTING .......................................................................................168
B MOVIE SETTING ................................................................ 169
MOVIE MODE....................................................................................169
MOVIE AF MODE ............................................................................170
HDMI OUTPUT INFO DISPLAY.................................................170
4K MOVIE OUTPUT ........................................................................171
HDMI REC CONTROL....................................................................171
MIC LEVEL ADJUSTMENT ..........................................................172
MIC/REMOTE RELEASE ................................................................172
7 Playback and the Playback Menu
173
The Playback Display ........................................................... 174
The DISP/BACK Button ...............................................................176
Viewing Pictures .................................................................... 178
Playback Zoom ................................................................................179
Multi-Frame Playback ..................................................................179
C The Playback Menu ......................................................... 180
RAW CONVERSION ........................................................................180
ERASE.....................................................................................................183
CROP ......................................................................................................186
xiii
RESIZE....................................................................................................187
PROTECT ..............................................................................................188
IMAGE ROTATE .................................................................................189
RED EYE REMOVAL ........................................................................190
VOICE MEMO SETTING ...............................................................191
IMAGE TRANSFER ORDER ..........................................................192
WIRELESS COMMUNICATION .................................................193
SLIDE SHOW ......................................................................................193
PHOTOBOOK ASSIST ....................................................................194
PC AUTO SAVE..................................................................................196
PRINT ORDER (DPOF) ...................................................................197
instax PRINTER PRINT ...................................................................199
DISP ASPECT .....................................................................................200
8 The Setup Menus
201
D USER SETTING ................................................................... 202
FORMAT ...............................................................................................203
DATE/TIME ..........................................................................................204
TIME DIFFERENCE ..........................................................................205
a........................................................................................206
MY MENU SETTING .......................................................................206
SENSOR CLEANING .......................................................................208
RESET .....................................................................................................209
D SOUND SETTING .............................................................. 210
AF BEEP VOL. .....................................................................................210
SELF-TIMER BEEP VOL. .................................................................211
OPERATION VOL. .............................................................................211
SHUTTER VOLUME .........................................................................212
xiv
Table of Contents
SHUTTER SOUND ...........................................................................212
PLAYBACK VOLUME ......................................................................213
D SCREEN SETTING .............................................................. 214
EVF BRIGHTNESS.............................................................................214
EVF COLOR .........................................................................................215
LCD BRIGHTNESS............................................................................215
LCD COLOR ........................................................................................216
IMAGE DISP. ........................................................................................216
AUTOROTATE DISPLAYS..............................................................217
PREVIEW EXP./WB IN MANUAL MODE ...............................217
PREVIEW PIC. EFFECT ...................................................................218
FRAMING GUIDELINE ...................................................................219
AUTOROTATE PB .............................................................................220
FOCUS SCALE UNITS ....................................................................220
DISP. CUSTOM SETTING ..............................................................221
D BUTTON/DIAL SETTING ................................................. 223
FOCUS LEVER SETTING ...............................................................223
EDIT/SAVE QUICK MENU............................................................224
FUNCTION (Fn) SETTING ...........................................................226
COMMAND DIAL SETTING .......................................................228
o S.S. OPERATION .......................................................................228
ISO COMMAND DIAL SETTING ..............................................229
SHUTTER AF.......................................................................................229
SHUTTER AE.......................................................................................230
SHOOT WITHOUT LENS ..............................................................230
SHOOT WITHOUT CARD ............................................................231
FOCUS RING ......................................................................................231
AE/AF-LOCK MODE .......................................................................232
xv
APERTURE SETTING ......................................................................232
TOUCH SCREEN SETTING ..........................................................233
D POWER MANAGEMENT .................................................. 234
AUTO POWER OFF .........................................................................234
PERFORMANCE................................................................................235
D SAVE DATA SETTING ........................................................ 236
FRAME NO. .........................................................................................237
SAVE ORG IMAGE ...........................................................................238
EDIT FILE NAME ...............................................................................238
COPYRIGHT INFO ...........................................................................239
D CONNECTION SETTING .................................................. 240
Bluetooth SETTINGS .....................................................................241
PC AUTO SAVE SETTINGS ..........................................................242
instax PRINTER CONNECTION SETTING ...........................242
GENERAL SETTINGS ......................................................................243
INFORMATION ..................................................................................244
RESET WIRELESS SETTING .........................................................244
9 Shortcuts
245
Shortcut Options................................................................... 246
The Q (Quick Menu) Button............................................... 247
The Quick Menu Display ...........................................................247
Viewing and Changing Settings...........................................249
Editing the Quick Menu .............................................................250
The Fn (Function) Buttons ................................................. 252
Assigning Roles to the Function Buttons........................254
E MY MENU ............................................................................ 256
MY MENU SETTING .......................................................................256
xvi
Table of Contents
259
10 Peripherals and Optional Accessories
External Flash Units .............................................................. 260
Flash Settings ...................................................................................261
SYNC TERMINAL ..............................................................................263
SHOE MOUNT FLASH ..................................................................264
MASTER(OPTICAL) .........................................................................269
Lenses........................................................................................ 275
Lens Parts ............................................................................................275
Removing Lens Caps ...................................................................276
Attaching Lens Hoods ................................................................276
Lenses with Aperture Rings.....................................................277
Lenses with No Aperture Rings.............................................278
Lenses with O.I.S. Switches.......................................................278
Manual Focus Lenses...................................................................279
Lens Care .............................................................................................280
11 Connections
281
HDMI Output .......................................................................... 282
Connecting to HDMI Devices ................................................282
Shooting ..............................................................................................283
Playback ...............................................................................................283
Wireless Transfer .................................................................... 284
Smart Phones and Tablets:
FUJIFILM Camera Remote......................................................284
Smart Phones and Tablets: BluetoothÂŽ Pairing ............285
Smartphones and Tablets: Wi-Fi............................................285
Computers: FUJIFILM PC AutoSave ....................................286
Computers: Wireless Connections ......................................286
xvii
Table of Contents
Connecting to Computers via USB ................................. 287
Windows (MyFinePix Studio) ..................................................287
Mac OS X/macOS...........................................................................287
RAW FILE CONVERTER EX 2.0 ..................................................287
Connecting the Camera ............................................................288
instax SHARE Printers .......................................................... 291
Establishing a Connection .......................................................291
Printing Pictures..............................................................................292
12 Technical Notes
293
Accessories from FUJIFILM ................................................ 294
Software from FUJIFILM ..................................................... 298
FUJIFILM Camera Remote ........................................................298
FUJIFILM PC AutoSave ................................................................298
MyFinePix Studio............................................................................299
RAW FILE CONVERTER EX 2.0 ..................................................299
For Your Safety ....................................................................... 300
Product Care ........................................................................... 313
Cleaning the Image Sensor ............................................... 314
Firmware Updates................................................................. 315
Checking the Firmware Version ............................................315
Troubleshooting .................................................................... 316
Warning Messages and Displays ..................................... 325
Memory Card Capacity ....................................................... 329
Specifications ......................................................................... 330
xviii
Supplied Accessories
The following are included with the camera:
• NP-W126S rechargeable battery
• BC-W126 battery charger
• EF-X8 shoe mounted flash unit
• Body cap
• Metal strap clips (× 2)
• Clip attaching tool
• Protective covers (× 2)
• Shoulder strap
• Owner’s Manual (this manual)
N If you purchased a lens kit, check that a lens is included.
xix
About This Manual
This manual contains instructions for your
FUJIFILM X-E3 digital camera. Be sure you have
read and understood its contents before proceeding.
Symbols and Conventions
The following symbols are used in this manual:
O Information that should be read to prevent
damage to the product.
N Additional information that may be helpful
when using the product.
P Pages on which related information may be found.
Menus and other text in the displays are shown in
bold. Illustrations are for explanatory purposes only;
drawings may be simplified, while photographs are not
necessarily taken with the model of camera described
in this manual.
Terminology
The optional SD, SDHC, and SDXC memory cards the
camera uses to store pictures are referred to as “memory cards”. The electronic viewfinder may be referred
to as the “EVF” and the LCD monitor as the “LCD”.
xx
Before You Begin
Parts of the Camera
Before You Begin
A Exposure compensation dial
.....................................................5, 91
Shutter button............................... 50
Auto mode selector lever .................7
Shutter speed dial ................ 5, 64, 72
Hot shoe ...............................107, 260
Microphone .................................172
Strap eyelet..................................... 28
Connector cover
Focus mode selector .................... 78
Lens signal contacts
Lens release button ...................... 31
AF-assist illuminator .................138
Self-timer lamp ...........................151
M Front command dial .............8, 228
N ON/OFF switch ............................... 42
O Function button (Fn1)...............252
P Body cap ......................................... 30
Q Microphone/remote release
connector (⌀ 2.5 mm)
......................................... 55, 68, 172
R HDMI Micro connector (Type D)
.......................................................282
S Micro USB (Micro-B)
USB 2.0 connector ...........35, 68, 288
Parts of the Camera
Before You Begin
T Diopter adjustment control ...... 11 e MENU/OK button .......................... 20
U Electronic viewnder (EVF)
f DISP (display)/BACK button
............................................12, 14, 15
................................................ 16, 176
V Eye sensor ....................................... 14 g a (playback) button................. 51
W VIEW MODE button....................... 14 h Cable channel cover for
DC coupler ..................................294
X DRIVE button ....................................6
b (delete) button
i Battery-chamber cover .............. 36
(playback mode) ....................... 52 j Battery-chamber cover latch.... 36
Y AE-L (exposure lock) button ...... 93 k Serial number plate ........................4
Z Rear command dial
l Tripod mount
......................................... 9, 178, 228 m LCD monitor ..................11, 12, 14, 15
a Focus stick (focus lever) .................4 n Speaker............................................ 58
b AF-L (focus lock) button ...............93 o Battery latch .................................. 39
c Q (quick menu) button .............247 p Battery chamber .......................... 36
d Indicator lamp ........................10, 35 q Memory card slot ......................... 36
The Serial Number Plate
Do not remove the serial number plate, which provides the FCC ID, KC mark, serial number, and other
important information.
Before You Begin
1 The Focus Stick (Focus Lever)
Tilt or press the focus stick to select
the focus area. The focus stick can
also be used to navigate the menus.
Parts of the Camera
The Shutter Speed Dial
The shutter speed dial is used to
choose the shutter speed.
Before You Begin
The Exposure Compensation Dial
Rotate the dial to choose an exposure compensation amount.
The DRIVE Button
Pressing the DRIVE button displays
drive mode options, where you
can choose from the following the
1 drive modes.
Before You Begin
Adv.
Mode
STILL IMAGE
CONTINUOUS
AE BKT
ISO BKT
FILM SIMULATION BKT
WHITE BALANCE BKT
DYNAMIC RANGE BKT
j MULTIPLE EXPOSURE
u PANORAMA
ADVANCED FILTER
MOVIE
48
97
95
95
95
96
96
101
103
99
54
Parts of the Camera
The Auto Mode Selector Lever
Switch between auto and manual
modes.
Mode
Select from P (program AE), S (shutter-priority AE),
A (aperture-priority AE), and M (manual) modes
(P 62, 64, 69, 72). Adjust shutter speed
and aperture using program shift (mode P) or set
shutter speed and/or aperture manually (modes S,
A, and M).
Auto mode. The camera adjusts settings automatically according to the option selected by rotating
the front command dial. Choose from modes suited to specic subject types (P 74), or select
S ADVANCED SR AUTO to let the camera automatically match the mode to the subject (P 76).
Scene selection is not available in Adv. or Y drive
modes.
N Restrictions may apply to camera settings depending on
the mode and shooting conditions.
Before You Begin
Position
The Command Dials
Rotate or press the command dials to perform the
operations listed below.
Front Command Dial
Before You Begin
Rotate
• Select menu tabs or page through menus.
• Adjust aperture.
• Select a scene when shooting in auto mode.
• Select an advanced filter when shooting with Y
(ADVANCED FILTER) selected in auto mode.
• Adjust exposure compensation when C is selected with
exposure compensation dial.
• Adjust sensitivity (ON selected for ISO COMMAND
DIAL SETTING).
• View other pictures during playback.
Press
Switch back and forth between aperture and exposure
compensation when C is selected with the exposure
compensation dial, or between aperture, exposure
compensation, and sensitivity when C is selected with
the exposure compensation dial and ISO COMMAND
SETTING is ON.
Parts of the Camera
Rear Command Dial
Rotate
and aperture (program shift).
• Choose a shutter speed.
• Adjust settings in the quick menu.
• Choose the size of the focus frame.
• Zoom in or out during focus zoom or in full frame or
multi-frame playback.
Press
• Perform the function assigned to the DIAL function
button.
• Press and hold to choose the manual focus mode focus display.
• Zoom in on the active focus point during playback.
Before You Begin
• Highlight menu items.
• Choose the desired combination of shutter speed
The Indicator Lamp
When the viewfinder is not in use,
camera status is shown by the indicator lamp.
Before You Begin
Indicator lamp
Camera status
Glows green Focus locked.
Focus or slow shutter speed warning. Pictures can
Blinks green
be taken.
• Camera on: Recording pictures. Additional pictures
Blinks green can be taken.
and orange • Camera off: Uploading pictures to a smartphone or
tablet.
Recording pictures. No additional pictures can be
Glows orange
taken at this time.
Blinks orange Flash charging; flash will not fire when picture is taken.
Blinks red Lens or memory error.
N Warnings may also appear in the display.
10
Parts of the Camera
The LCD Monitor
The LCD monitor also functions as
a touch screen that can be used
for:
• Touch photography (P 23)
• Focus area selection (P 22)
• Function selection (P 24)
• Full-frame playback (P 25)
Before You Begin
Focusing the Viewfinder
The camera is equipped with diopter adjustment in the range −4 to
+2 m–1 to accommodate individual
differences in vision. Rotate the diopter adjustment control until the
viewfinder display is in sharp focus.
11
Camera Displays
This section lists the indicators that may be displayed during shooting.
O For illustrative purposes, displays are shown with all indicators lit.
Before You Begin
Electronic Viewfinder/LCD Monitor
41
12/31/2050 10:00 AM
40
2000
12
3.2
0.0
51200
Camera Displays
A Focus check ........................... 89, 143
B Depth-of-eld preview .........70, 89
C Image transfer status ................192
D Bluetooth ON/OFF .....................241
E Number of frames selected for
upload .........................................192
F Movie mode .......................... 54, 169
G Time remaining ............................ 54
H Number of available frames * ...329
I Image quality and size ....115, 116
J Date and time .............44, 204, 205
K Focus frame .............................82, 92
L Virtual horizon .............................. 18
M Focus warning ..................... 50, 325
N White balance .............................122
O Film simulation ...........................118
P Dynamic range ...........................121
Q Temperature warning ...............328
Flash compensation..................109
R Histogram....................................... 19
S Distance indicator........................ 89 n IS mode .........................................157
T Battery level ................................... 43 o Location data download
status............................................243
U Sensitivity......................................158
* Shows “9999” if there is space for over 9999 frames.
13
Before You Begin
V Exposure compensation ............ 91
W Aperture .............................63, 69, 72
X Shutter speed....................63, 64, 72
Y TTL lock .......................166, 227, 255
Z AE lock ............................. 92, 93, 230
a Metering........................................155
b Shooting mode ............................. 62
c Focus indicator.............................. 79
d Manual focus indicator .............. 87
e Focus mode.................................... 78
f AF lock ............................. 92, 93, 229
g AF+MF indicator ........................141
h Shutter type..................................156
i Continuous mode ........................ 97
j Exposure indicator .................72, 91
k Self-timer indicator....................151
l Microphone/remote release ...172
m Flash (TTL) mode .......................109
Before You Begin
Choosing a Display Mode
Press the VIEW MODE button to cycle through the following display
modes:
1 • E EYE SENSOR: Putting your eye
to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye
away turns the viewfinder off and LCD monitor on.
• EVF ONLY: Viewfinder on, LCD monitor off.
• LCD ONLY: LCD monitor on, viewfinder off.
• EVF ONLY + E: Putting your eye to the viewfinder
turns the viewfinder on; taking it away turns the
viewfinder off. The LCD monitor remains off.
• E EYE SENSOR + LCD IMAGE DISP.: Putting your eye to
the viewfinder during shooting turns the viewfinder on, but the LCD monitor is used for the display of
images immediately after shooting.
The Eye Sensor
The eye sensor may respond to objects
other than your eye or to light shining
directly on the sensor.
Eye sensor
14
Camera Displays
Display Rotation
When ON is selected for D SCREEN SET-UP >
AUTOROTATE DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to
match camera orientation.
15
Before You Begin
Adjusting Display Brightness and Color
The brightness and hue of the viewfinder and LCD
monitor can be adjusted using the items in the
D SCREEN SET-UP menu. Choose EVF BRIGHTNESS
or EVF COLOR to adjust viewfinder brightness or hue, 1
LCD BRIGHTNESS or LCD COLOR to do the same for
the LCD monitor.
The DISP/BACK Button
The DISP/BACK button controls the
display of indicators in the viewfinder and LCD monitor.
Before You Begin
N Indicators for the EVF and LCD must be selected sepa-
rately. To choose the EVF display, place your eye to the
viewfinder while using the DISP/BACK button.
Viewfinder
Standard
Information off
LCD Monitor
Info display
Standard
16
3.2
Information off
Camera Displays
Customizing the Standard Display
To choose the items shown in the standard display:
Display standard indicators.
Use the DISP/BACK button to display standard in1
dicators.
Select DISP. CUSTOM SETTING.
Select D SCREEN SET-UP > DISP. CUSTOM
SETTING in the setup menu.
Choose items.
Highlight items and press MENU/OK to select or
deselect.
• FRAMING GUIDELINE
• ELECTRONIC LEVEL
• FOCUS FRAME
• AF DISTANCE INDICATOR
• MF DISTANCE INDICATOR
• HISTOGRAM
• LIVE VIEW HIGHLIGHT ALERT
• SHOOTING MODE
• APERTURE/S-SPEED/ISO
• INFORMATION BACKGROUND
• Expo. Comp. (Digit)
• Expo. Comp. (Scale)
• FOCUS MODE
• PHOTOMETRY
• SHUTTER TYPE
• FLASH
• CONTINUOUS MODE
• DUAL IS MODE
• TOUCH SCREEN MODE
• WHITE BALANCE
• FILM SIMULATION
• DYNAMIC RANGE
• FRAMES REMAINING
• IMAGE SIZE/QUALITY
• MOVIE MODE & REC. TIME
• IMAGE TRANSFER ORDER
• BATTERY LEVEL
• FRAMING OUTLINE
17
Before You Begin
4
Save changes.
Press DISP/BACK to save changes.
Exit the menus.
Press DISP/BACK as needed to exit the menus and
return to the shooting display.
Before You Begin
N Some indicators are not displayed in all modes.
Virtual Horizon
Selecting ELECTRONIC LEVEL displays
a virtual horizon. The camera is level
when the two lines overlap. Note that
the virtual horizon may not be displayed
if the camera lens is pointed up or down.
Framing Outline
Enable FRAMING OUTLINE to make the borders of the frame
easier to see against dark backgrounds.
18
Camera Displays
Histograms
Histograms show the distribution of tones in the image.
Brightness is shown by the horizontal axis, the number of pixels by the vertical axis.
Number of
pixels
• Optimal exposure:
Highlights
Before You Begin
Shadows
Pixel brightness
Pixels are distributed
in an even curve throughout the tone
range.
• Overexposed: Pixels are clustered on the
right side of the graph.
• Underexposed: Pixels are clustered on the
left side of the graph.
To view separate RGB histograms and a
display showing areas of the frame that
will be overexposed at current settings
superimposed on the view through the
lens, press the function button to which
HISTOGRAM is assigned (P 226,
254).
A Overexposed areas blink
B RGB histograms
19
Using the Menus
To display the menus, press MENU/OK.
Shooting
Playback
IMAGE QUALITY SETTING
PLAY BACK MENU
Before You Begin
RAW CONVERSION
ERASE
CROP
RESIZE
PROTECT
IMAGE ROTATE
RED EYE REMOVA
VOICE MEMO SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
GRAIN EFFECT
DYNAMIC RANGE
WHITE BALANCE
HIGHLIGHT TONE
EXIT
EXIT
To navigate the menus:
Press MENU/OK to display the
menus.
IMAGE QUALITY SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
GRAIN EFFECT
DYNAMIC RANGE
WHITE BALANCE
HIGHLIGHT TONE
EXIT
IMAGE QUALITY SETTING
Press the focus stick (focus lever) left to highlight the tab for
the current menu.
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
GRAIN EFFECT
DYNAMIC RANGE
WHITE BALANCE
HIGHLIGHT TONE
EXIT
Tab
20
Using the Menus
Press the focus stick up or down to highlight the
tab (H, G, A, F, B, E, C or D) containing the
desired item.
Press the focus stick right to place the cursor in
the menu.
through menus and the rear command dial to highlight
menu items.
The focus stick (focus lever) does not tilt diagonally.
21
Before You Begin
N Use the front command dial to select menu tabs or page
Touch Screen Mode
Use touch controls for shooting or playback.
Shooting Touch Controls
Before You Begin
Touch Controls and the EVF
If ON is selected for D BUTTON/DIAL SETTING >
TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF
and one of ALL, RIGHT, or LEFT for EVF TOUCH SCREEN
AREA SETTINGS, the LCD monitor can be used to select
the focus area while pictures are being framed in the
electronic viewfinder (EVF).
22
Touch Screen Mode
Mode
Description
TOUCH Tap your subject in the display to focus and reSHOOTING lease the shutter.
Tap to select a focus point. In focus mode S (AF-S),
focus will lock, while in focus mode C (AF-C), the
AF
camera will continually adjust focus in response
to changes in the distance to the subject.
AREA
Tap to select a point for focus or zoom. The focus
frame will move to the selected point.
OFF
Touch controls off. The display does not respond
when tapped.
N Touch control settings can be adjusted using G AF/
MF SETTING > TOUCH SCREEN MODE (P 146). To
disable touch controls and hide the touch screen mode
indicator, select OFF for D BUTTON/DIAL SETTING >
TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF.
23
Before You Begin
LCD Monitor Touch Controls
Touch controls can be used for
such operations as choosing the
focus area and taking photographs. The operation performed
can be selected by tapping the
touchscreen mode indicator in the display to cycle
through the following options:
Before You Begin
Touch Function
Functions can be assigned to the
following flick gestures in much
the same way as function buttons
1 (P 252):
• Flick up: T-Fn1
• Flick left: T-Fn2
• Flick right: T-Fn3
• Flick down: T-Fn4
24
Touch Screen Mode
Before You Begin
Playback Touch Controls
When ON is selected for D BUTTON/DIAL SETTING >
TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF,
touch controls can be used for the following playback
operations:
Swipe:
Swipe
fi
nger
across
the
•
display to view other images.
• Pinch-out: Place two fingers on the
display and spread them apart to
zoom in.
• Pinch-in: Place two fingers on the
display and slide them together
to zoom out.
N Pictures can be zoomed out until the entire image is
visible but no further.
25
Touch Screen Mode
• Double-tap: Tap the display twice
to zoom in on the focus point.
• Drag: View other areas of the im-
Before You Begin
age during playback zoom.
26
First Steps
27
Attaching the Strap
Attach the strap clips to the camera and then
attach the strap.
Open a strap clip.
Use the clip attaching tool to
open a strap clip, making sure
that the tool and clip are in the
orientations shown.
Slide the clip onto the tool.
Slide the clip onto the tool so
that it hooks over the projection.
Place the strap clip on an eyelet.
Hook the strap eyelet in the
clip opening. Remove the tool,
using the other hand to keep
the clip in place.
First Steps
O Keep the tool in a safe place,
as you will need it to open the
strap clips when removing the
strap.
28
Attaching the Strap
Attach a protective cover.
Place a protective cover over
the eyelet as shown, with the
black side of the cover toward
the camera.
Fasten the strap.
Insert the strap through a protective cover and strap clip and
fasten as shown.
First Steps
Pass the clip through the eyelet.
Rotate the clip fully through
the eyelet until it clicks closed.
O To avoid dropping the camera,
be sure the strap is correctly
secured.
Repeat the above steps for the second eyelet.
29
Attaching a Lens
The camera can be used with lenses for the
FUJIFILM X-mount.
First Steps
Remove the body cap from the
camera and the rear cap from the
2 lens. Place the lens on mount,
keeping the marks on the lens and
camera aligned (A), and then rotate the lens until it clicks into place (B).
O When attaching lenses, ensure that dust or other foreign
matter does not enter the camera and be careful not to
touch the camera’s internal parts. Do not press the lens
release button while attaching the lens and be sure the
latch has securely clicked into place.
30
Attaching a Lens
Removing Lenses
To remove the lens, turn the camera off,
then press the lens release button (A)
and rotate the lens as shown (B).
O To prevent dust accumulating on the
Lenses and Other Optional Accessories
The camera can be used with lenses and accessories for the
FUJIFILM X-mount.
O Before attaching or removing (exchanging) lenses, attach the lens caps and check that the lenses are free of
dust and other foreign matter. Do not change lenses in
direct sunlight or under another bright light source, as
light focused into the interior of the camera could cause
it to malfunction.
31
First Steps
lens or inside the camera, replace
the lens caps and camera body cap
when the lens is not attached.
Charging the Battery
The battery is not charged at shipment. Before
use, charge the battery in the supplied battery
charger.
O An NP-W126S rechargeable battery is supplied with the
camera. Charging takes about 150 minutes.
Place the battery in the charger.
Place the battery in the supplied battery charger as shown.
Plug the charger in.
Plug the charger into an indoor
power outlet. The charging indicator will light.
Charge the battery.
Remove the battery when charging is complete.
32
CHARGE
First Steps
Charging the Battery
The Charging Indicator
The charging indicator shows battery charge status as follows:
Charging indicator
Blinks
Battery fault.
Off
Action
Insert the battery.
Remove the battery.
—
Unplug the charger and
remove the battery.
33
First Steps
On
Battery status
Battery not
inserted.
Battery fully
charged.
Battery charging.
O The supplied AC cord is for use exclusively with the supplied battery charger. Do not use the supplied charger
with other cords or the supplied cord with other devices.
Do not affix labels or other objects to the battery. Failure
to observe this precaution could make it impossible to
remove the battery from the camera.
First Steps
Do not short the battery terminals. The battery could
overheat.
Read the cautions in “The Battery and Power Supply”.
Use only battery chargers designated for use with the
battery. Failure to observe this precaution could result in
product malfunction.
Do not remove the labels from the battery or attempt to
split or peel the outer casing.
The battery gradually loses its charge when not in use.
Charge the battery one or two days before use. If the
battery fails to hold a charge, it has reached the end of
its charging life and must be replaced.
Unplug the charger when it is not in use.
Remove dirt from the battery terminals with a clean, dry
cloth. Failure to observe this precaution could prevent
the battery from charging.
Note that charging times increase at low temperatures.
34
Charging the Battery
Charging via Computer
The battery also charges if the camera is connected to a computer. Turn the camera off, insert the battery, and connect a
Micro USB (Micro-B) USB 2.0 cable as shown, making sure the
connectors are fully inserted (choose a cable suitable for data
transfer and no more than 1.5 m/4.9 ft. long).
First Steps
Charging takes about 300 minutes. Battery status is shown by
the indicator lamp.
Indicator lamp
Battery status
On
Battery charging
Off
Charging complete
Blinks
Battery fault
Connect the camera directly to the computer; do not use a
USB hub or keyboard. Charging stops if the computer enters
sleep mode; to resume charging, activate the computer and
disconnect and reconnect the USB cable. Charging may not
be supported depending on the model of computer, computer settings, and the computer’s current state.
35
Inserting Batteries and Memory
Cards
After charging the battery, insert the battery
and memory card as described below.
First Steps
Open the battery-chamber cover.
Slide the battery-chamber latch
as shown and open the battery-chamber cover.
O Do not open the battery-cham-
ber cover when the camera is
on. Failure to observe this precaution could damage image
files or memory cards.
Do not use excessive force when
handling the battery-chamber
cover.
36
Inserting Batteries and Memory Cards
Insert the battery.
Using the battery to keep the
battery latch pressed to one
side, insert the battery contacts
first in the direction shown by
the arrow. Confirm that the
battery is securely latched.
First Steps
Insert the battery in the orientation shown. Do not use force
or attempt to insert the battery
upside down or backwards.
The battery will slide in easily
in the correct orientation.
Insert the memory card.
Holding the card in the orientation shown, slide it in until it
clicks into place at the back of
the slot.
O Be sure card is in the correct
orientation; do not insert at an
angle or use force.
37
4
Close the battery-chamber cover.
Close and latch the cover.
O If
the cover does not close,
check that the battery is in the
correct orientation. Do not attempt to force the cover shut.
First Steps
38
Inserting Batteries and Memory Cards
Removing the Battery
Before removing the battery, turn the camera off and open the
battery-chamber cover.
To remove the battery, press the battery
latch to the side, and slide the battery
out of the camera as shown.
ture environments. Observe caution when removing the
battery.
Removing Memory Cards
Before removing memory cards, turn the camera off and open
the battery-chamber cover.
Press and release the card to eject it part
way (to prevent the card falling from the
slot, press the center of the card and release it slowly, without removing your
finger from the card). The card can then
be removed by hand.
39
First Steps
O The battery may become hot when used in high-tempera-
First Steps
Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera;
UHS-I is supported. Cards with a UHS speed class of 3
or better are recommended for movies. A complete list
of approved memory cards is available at http://www.
2 fujifilm.com/support/digital_cameras/compatibility/.
Operation is not guaranteed with other cards. The
camera cannot be used with xD-Picture Cards or
MultiMediaCard (MMC) devices.
O Do not turn the camera off or remove the memory card
while the memory card is being formatted or data are being
recorded to or deleted from the card. Failure to observe
this precaution could damage the card.
Memory cards can be locked, making it impossible to format the
card or to record or delete images.
Before inserting a memory card,
slide the write-protect switch to the unlocked position.
40
Inserting Batteries and Memory Cards
Format memory cards before first use, and be sure to
reformat all memory cards after using them in a computer or other device.
Memory cards are small and can be swallowed; keep out
of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
Do not affix labels or other objects to memory cards.
Peeling labels can cause camera malfunction.
Movie recording may be interrupted with some types of
memory card.
Formatting a memory card in the camera creates a folder
in which pictures are stored. Do not rename or delete
this folder or use a computer or other device to edit, delete, or rename image files. Always use the camera to delete pictures; before editing or renaming files, copy them
to a computer and edit or rename the copies, not the
originals. Renaming the files on the camera can cause
problems during playback.
41
First Steps
miniSD or microSD adapters that are larger or smaller
than memory cards may not eject normally; if the card
does not eject, take the camera to an authorized service
representative. Do not forcibly remove the card.
Turning the Camera On and Off
Use the ON/OFF switch to turn the camera on
and off.
Rotate the switch to ON to turn the
camera on, or to OFF to turn the
2 camera off.
First Steps
O Fingerprints and other marks on the lens or viewfinder
can affect pictures or the view through the viewfinder.
Keep the lens and viewfinder clean.
N Press the a button to start playback. Press the shutter
button halfway to return to shooting mode.
The camera will turn off automatically if no operations are performed for the length of time selected for
D POWER MANAGEMENT > AUTO POWER OFF. To
reactivate the camera after it has turned off automatically, press the shutter button halfway or turn the ON/OFF
switch to OFF and then back to ON.
42
Checking the Battery Level
After turning the camera on, check the battery
level in the display.
Battery level is shown as follows:
Description
Battery partially discharged.
Battery about 80% full.
Battery about 60% full.
Battery about 40% full.
Battery about 20% full.
Low battery. Charge as soon as
possible.
Battery exhausted. Turn camera
off and recharge battery.
First Steps
Indicator
(red)
(blinks red)
43
Basic Setup
When you turn the camera on for the first time,
you can choose a language and set the camera
clock. At default settings, you can also pair the
camera with a smartphone or tablet so that you
can later synchronize the clocks or download
pictures. Follow the steps below when turning
the camera on for the first time.
First Steps
N If you intend to pair the camera with a smartphone
or tablet, install and launch the latest version of the
FUJIFILM Camera Remote App on the smart device before proceeding. For more information, visit:
http://app.fujifilm-dsc.com/en/camera_remote/
Turn the camera on.
A language-selection dialog
will be displayed.
Choose a language.
Highlight a language using the
focus stick (focus lever, A) and
press MENU/OK (B).
44
Basic Setup
Pair the camera with the smartphone or tablet.
Press MENU/OK to pair the camera with a smartphone or
tablet running the FUJIFILM
Camera Remote app.
PAIRING REGISTRATION
PAIR WITH SMARTPHONE?
IMAGES CAN BE EASILY TRANSFERRED
TO SMARTPHONE BY PAIRING
SCAN QR CODE OR SEARCH FOR "FUJIFILM
Camera Remote" APP ON THE WEB
SET
SKIP
HELP
N To skip pairing, press DISP/BACK.
Check the time.
When pairing is complete, you
will be prompted to set the
camera clock to the time reported by the smartphone or tablet.
Check that the time is correct.
First Steps
PAIRING REGISTRATION
PAIRING COMPLETE
SET DATE/TIME FROM SMARTPHONE?
SET
CANCEL
N To set the clock manually, press DISP/BACK (P 46).
Set the clock.
Press MENU/OK to set the camera clock to the time
reported by the smartphone or tablet and exit to
shooting mode.
N If the battery is removed for an extended period, the
camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on.
Skipping the Current Step
Press DISP/BACK to skip the current step. A confirmation dialog
will be displayed; select NO to avoid repeating any steps you
skipped the next time the camera is turned on.
45
Basic Setup
Choosing a Different Language
To change the language:
Display language options.
Select D USER SETTING > a.
Choose a language.
Highlight the desired option and press MENU/OK.
First Steps
Changing the Time and Date
To set the camera clock:
Display DATE/TIME options.
Select D USER SETTING > DATE/TIME.
Set the clock.
Press the focus stick (focus lever) left or right to
highlight the year, month, day, hour, or minute
and press up or down to change. Press MENU/OK
to set the clock.
46
Basic Photography
and Playback
47
Taking Photographs (Mode P)
This section describes how to take pictures using program AE (mode P). See pages 62–73
for information on S, A, and M modes.
Select B (STILL IMAGE) drive mode.
Press the DRIVE button and select B (STILL IMAGE) from the
list of drive mode options.
Adjust settings for program AE.
Basic Photography and Playback
A Auto mode selector lever (P 7): Select z.
B Shutter speed (P 62): Select A (auto).
C Focus mode (P 78): Select S (single AF).
D Aperture (P 62): Select A (auto).
48
Taking Photographs (Mode P)
Check the shooting mode.
Confirm that P appears in the
display.



Ready the camera.
Hold the camera steady with
both hands and brace your elbows against your sides.
Shaking or unsteady hands
can blur your shots.
Basic Photography and Playback
To prevent pictures that are
out of focus or too dark (underexposed), keep your fingers
and other objects away from
the lens and AF-assist illuminator.
Frame the picture.
Lenses with Zoom Rings
Use the zoom ring to frame the picture in the display. Rotate the ring
left to zoom out, right to zoom in.
49
Taking Photographs (Mode P)
Focus.
Press the shutter button halfway to focus.
N If the subject is poorly lit, the
AF-assist illuminator may light.



Focus indicator
Focus frame
If the camera is able to focus, it will beep twice and
focus area and focus indicator will glow green.
Focus and exposure will lock while the shutter
button is pressed halfway.
Basic Photography and Playback
If the camera is unable to focus, the focus frame will
turn red, s will be displayed, and the focus indicator will blink white.
50
Shoot.
Smoothly press the shutter button the rest of the
way down to take the picture.
a Viewing Pictures
Pictures can be viewed in the viewfinder or LCD
monitor.
To view pictures full frame, press a.
100-0001
N Pictures taken using other cameras are marked with a
m (“gift image”) icon to warn that they may not display
correctly and that playback zoom may not be available.
51
Basic Photography and Playback
Additional pictures can be viewed by pressing the focus stick (focus lever) left or right or rotating the front
command dial. Press the focus stick or rotate the dial
right to view pictures in the order recorded, left to
view pictures in reverse order. Keep the focus stick
pressed to scroll rapidly to the desired frame.
b Deleting Pictures
Use the b button to delete pictures.
O Deleted pictures cannot be recovered. Copy important
pictures to a computer or other storage device before
proceeding.
With a picture displayed full frame, press the b
button and select FRAME.
Basic Photography and Playback
ERASE
FRAME
SELECTED FRAMES
ALL FRAMES
Press the focus stick (focus lever) left or right
to scroll through pictures and press MENU/OK to
delete (a confirmation dialog is not displayed).
Repeat to delete additional pictures.
N Protected pictures cannot be deleted. Remove protection from any pictures you wish to delete (P 188).
Pictures can also be deleted from the menus using the
C PLAY BACK MENU > ERASE option (P 183).
52
Movie Recording and
Playback
53
F Recording Movies
This section describes how to film movies in
auto mode.
Movie Recording and Playback
Press the DRIVE button and select F (MOVIE) from the list of
drive mode options.
Rotate the auto mode selector
lever to AUTO to shoot movies
in S ADVANCED SR AUTO
mode.
N Rotate the lever to z to shoot movies in mode P.
Movies shot with U selected for MOVIE MODE
will also be recorded in mode P.
54
Press the shutter button to
start recording. A recording indicator (V) blinks and the time
remaining is displayed while
recording is in progress.
Recording Movies
Press the button again to end recording.
Recording ends automatically when the maximum length is reached or the memory card is full.
Using an External Microphone
Sound can be recorded with external
microphones that connect using jacks
2.5 mm in diameter; microphones that
require bus power cannot be used. See
the microphone manual for details.
Movie Recording and Playback
55
O Sound is recorded via the built-in microphone or an
optional external microphone. Do not cover the microphone during recording. Note that the microphone may
pick up lens noise and other sounds made by the camera during recording.
Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not
indicate a malfunction.
N The indicator lamp lights while recording is in progress.
During recording, you can change exposure compensation by up to Âą2 EV and adjust zoom using the zoom ring
on the lens (if available).
Movie Recording and Playback
If the lens is equipped with an aperture mode switch,
select the aperture mode before beginning recording.
If an option other than A is selected, shutter speed and
aperture can be adjusted while recording is in progress.
Recording may be unavailable at some settings, while
in other cases settings may not apply during recording.
56
Recording Movies
Movie Recording and Playback
Adjusting Movie Settings
• The movie type, frame size, and frame rate can be
selected using B MOVIE SETTING > MOVIE MODE.
• The AF-area mode for movie recording is selected using B MOVIE SETTING > MOVIE AF MODE;
choose from MULTI and AREA.
• Focus mode is selected using the focus mode selector; for continuous focus adjustment, select C,
or choose S and enable Intelligent Face Detection
(Intelligent Face Detection is not available in focus 4
mode M).
Depth of Field
Choose low f-numbers to soften background details.
57
a Viewing Movies
View movies on the camera.
In full-frame playback, movies are
identified by a W icon.
12/31/2050 10:00 AM
PLAY
Âą0
The following operations can be performed while a movie is displayed:
Movie Recording and Playback
Focus stick Playback in
Playback
(focus lever) progress ((x
x) paused (y
(y)
Up
End playback
Pause play- Start/resume
Down
back
playback
Single frame
Left/right Adjust speed
rewind/advance
Progress is shown in the display
during playback.
29m59s
O Do not cover the speaker during
playback.
58
STOP
PAUSE
Viewing Movies
Press MENU/OK to pause playback and display volume
controls. Press the focus stick (focus lever) up or down
to adjust the volume; press MENU/OK again to resume
playback. Volume can also be adjusted using D SOUND
SET-UP > PLAYBACK VOLUME.
Playback Speed
Press the focus stick (focus lever) left or
right to adjust playback speed during
playback. Speed is shown by the number of arrows (M or N).
29m59s
STOP
PAUSE
Arrows
Movie Recording and Playback
59
MEMO
60
Taking Photographs
61
Choosing a Shooting Mode
For control over shutter speed and aperture
(P, S, A, and M modes), rotate the auto mode
selector lever to z. Rotate the lever to AUTO to
choose from modes suited to specific subject
types, or select S ADVANCED SR AUTO to let
the camera automatically match the mode to
the subject.
Taking Photographs
Mode P: Program AE
Let the camera choose shutter speed and aperture
5 for optimal exposure. Other values that produce the
same exposure can be selected with program shift.
Adjust settings as follows:
A Auto mode selector lever: z
B Shutter speed: A (auto)
C Aperture: A (auto)
62
Choosing a Shooting Mode
Confirm that P appears in the display.



O If the subject is outside the metering range of the cam-
era, the shutter speed and aperture displays will show
“– – –”.
Program Shift
If desired, you can rotate the rear command dial to select other combinations
of shutter speed and aperture without
altering exposure (program shift).



Aperture
O Program shift is not available during movie recording
or if the flash supports TTL auto or an auto option is selected for H IMAGE QUALITY SETTING > DYNAMIC
RANGE.
N To cancel program shift, turn the camera off.
63
Taking Photographs
Shutter speed
Mode S: Shutter-Priority AE
Choose a shutter speed and let the camera adjust aperture for optimal exposure.
Taking Photographs
Adjust settings as follows:
5 A Auto mode selector lever: z
B Shutter speed: Choose a shutter speed
C Aperture: A (auto)
Confirm that S appears in the display.



O If the correct exposure cannot be achieved at the select-
ed shutter speed, aperture will be displayed in red. If the
subject is outside the metering range of the camera, the
aperture display will show “– – –”.
64
Choosing a Shooting Mode
At settings other than 180X, shutter speed can also be
adjusted in increments of 1⁄3 EV by rotating the rear command dial. Shutter speed can be adjusted even while the
shutter button is pressed halfway.
Sensitivity and Depth of Field
If you choose a fast shutter speed when the subject is poorly
lit, the camera autoexposure program will select a wider aperture. This will produce the correct exposure but may also
reduce depth of field so that less of the area behind and in
front of your subject appears to be in focus. To stop aperture
down and increase depth of field, select a higher sensitivity.
Taking Photographs
65
Time (T)
Rotate the shutter speed dial to T (time) to choose
slow shutter speeds for long time-exposures. Use
of a tripod is recommended to prevent the camera
moving during the exposure.
Taking Photographs
Rotate the shutter speed dial
to T.
Rotate the rear command dial
to choose a shutter speed.
Press the shutter button all the way down to take
a picture at the selected shutter speed. At speeds
of 1 s or slower, a count-down timer will be displayed while the exposure is in progress.
N To
reduce “noise” (mottling) in long time-exposures,
select ON for H IMAGE QUALITY SETTING > LONG
EXPOSURE NR. Note that this may increase the time
needed to record images after shooting.
66
Choosing a Shooting Mode
Bulb (B)
Select a shutter speed of B (bulb) for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the
camera moving during the exposure.
Rotate the shutter speed dial
to B.
Press the shutter button all the way down. The
shutter will remain open for up to 60 minutes 5
while the shutter button is pressed; the display
shows the time elapsed since the exposure started (if the electronic shutter is used, the shutter
will remain open for 1 second, regardless of how
long the shutter button is pressed).
Taking Photographs
N Selecting an aperture of A fixes shutter speed at 30 s.
To reduce “noise” (mottling) in long time-exposures,
select ON for H IMAGE QUALITY SETTING > LONG
EXPOSURE NR. Note that this may increase the time
needed to record images after shooting.
67
Using a Remote Release
An optional RR-90 remote release can be
used for long time-exposures. The RR-90
connects via the Micro USB (Micro-B)
USB 2.0 connector.
Alternatively, electronic releases from
third-party suppliers can be connected
via the microphone/remote release connector (⌀2.5 mm 3-pole mini jack).
Third-party mechanical releases connect A
5 as shown.
Taking Photographs
N A confirmation dialog will be displayed when a third-party release
is connected; press MENU/OK and
select n REMOTE for MIC/REMOTE
RELEASE.
68
CHECK MIC/REMOTE RELEASE
SETTING
SKIP
SET
Choosing a Shooting Mode
Mode A: Aperture-Priority AE
Choose an aperture and let the camera adjust shutter
speed for optimal exposure.
Taking Photographs
Adjust settings as follows:
A Auto mode selector lever: z
B Shutter speed: A (auto)
C Aperture: Select Z and rotate the lens aperture
ring to adjust aperture
Confirm that A appears in the display.



O If the correct exposure cannot be achieved at the select-
ed aperture, shutter speed will be displayed in red. If the
subject is outside the metering range of the camera, the
shutter speed display will show “– – –”.
N Aperture can be adjusted even while the shutter button
is pressed halfway.
69
Previewing Depth of Field
When PREVIEW DEPTH OF FIELD is
assigned to a function button, pressing
the button stops aperture down to the
selected setting, allowing depth of field
to be previewed in the display.






N If
both AF DISTANCE INDICATOR
and MF DISTANCE INDICATOR are
selected in the D SCREEN SET-UP >
DISP. CUSTOM SETTING list, depth of
field can also be previewed using the
depth-of-field indicator in the standard display. Use the DISP/BACK button
to display standard indicators.


Depth of field
Taking Photographs
Use the G AF/MF SETTING > DEPTH-OF-FIELD SCALE
option to choose how depth of field is displayed. Choose
FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed
as prints and the like, PIXEL BASIS to help you assess
depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays.
70
Choosing a Shooting Mode
Sensitivity and Motion Blur
If you choose a narrow aperture when the subject is poorly
lit, the shutter speed selected by the autoexposure program
may not be fast enough to prevent motion blur. For faster
shutter speeds that reduce motion blur, select a higher sensitivity.
Taking Photographs
71
Mode M: Manual Exposure
Alter exposure from that selected by the camera.
Taking Photographs
Adjust settings as follows:
A Auto mode selector lever: z
5 B Shutter speed: Choose a shutter speed
C Aperture: Select Z and rotate the lens aperture
ring to adjust aperture
Confirm that M appears in the
display. The amount the picture
would be under- or over-exposed
at current settings is shown by the
exposure indicator; adjust shutter speed and aperture until the desired exposure is
reached.
㹋



N At settings other than 180X, shutter speed can also be
adjusted in increments of 1⁄3 EV by rotating the rear command dial.
72
Choosing a Shooting Mode
Exposure Preview
To preview exposure in the LCD monitor, select an option other than OFF for
D SCREEN SET-UP > PREVIEW EXP./
WB IN MANUAL MODE. Select OFF
when using the flash or on other occasions on which exposure may change
when the picture is taken.
Taking Photographs
73
Auto Mode
The camera adjusts settings automatically according
to the option selected by rotating the front command
dial. Choose from modes suited to specific subject
types, or select S ADVANCED SR AUTO to let the
camera automatically match the mode to the subject.
Taking Photographs
Press the DRIVE button and select B (STILL IMAGE) from the
list of drive mode options.
Rotate the auto mode selector
lever to AUTO.
Rotate the front command dial
to choose an option.
The currently-selected scene
appears in the display.
74
Choosing a Shooting Mode
Mode
S ADVANCED
SR AUTO
h PORTRAIT
Z PORTRAIT
ENHANCER
M LANDSCAPE
N Scene selection is also available using A SHOOTING
SETTING > SCENE POSITION in the shooting menu.
75
Taking Photographs
Description
The camera automatically optimizes settings to
suit the scene.
Choose for portraits.
Processes portraits to give the subject a smooth,
natural-looking complexion.
Choose for daylight shots of buildings and landscapes.
N SPORT
Choose when photographing moving subjects.
O NIGHT
Choose for poorly lit twilight or night scenes.
H NIGHT
Choose this mode for slow shutter speeds when
(TRIPOD)
shooting at night.
p FIREWORKS Slow shutter speeds are used to capture the expanding burst of light from a rework.
Q SUNSET
Choose this mode to record the vivid colors in
sunrises and sunsets.
R SNOW
Choose for crisp, clear shots that capture the
brightness of scenes dominated by shining
white snow.
s BEACH
Choose for crisp, clear shots that capture the
brightness of sunlit beaches.
f UNDERWATER Reduces the blue cast typically associated with
underwater lighting.
U PARTY
Capture indoor background lighting under lowlight conditions.
V FLOWER
Effective for taking more vivid shots of flowers.
W TEXT
Take clear pictures of text or drawings in print.
Choosing a Shooting Mode
S ADVANCED SR AUTO
The scene selected by the camera
in S ADVANCED SR AUTO mode
is shown by an icon in the display.
Taking Photographs
• a AUTO
• c LANDSCAPE
• d NIGHT
• h NIGHT (TRIPOD)
• e MACRO
• u BEACH
5 • v SUNSET
• w SNOW
• x SKY
• y GREENERY
• z SKY & GREENERY
• d PORTRAIT
• g BACKLIT PORTRAIT
• c MOVING OBJECT
• a PORTRAIT&MOTION
• b BACKLIT PORTRAIT&
MOTION
O The mode selected may vary with shooting conditions.
If the mode and subject do not match, select a scene
manually.
76
Autofocus
Take pictures using autofocus.
Rotate the focus mode selector
to S or C (P 78).
Use G AF/MF SETTING > AF MODE to choose an
AF mode (P 80).
Choose the position and size of
the focus frame (P 82).
Take pictures.
Taking Photographs
N For information on the autofocus system, visit:
http://fujifilm-x.com/af/en/index.html
77
Focus Mode
Use the focus mode selector to
choose how the camera focuses.
Choose from the following options:
Mode
Description
Single AF: Focus locks while the shutter button is pressed
(AF-S) halfway. Choose for stationary subjects.
Continuous AF: Focus is continually adjusted to reflect
C changes in the distance to the subject while the shutter
(AF-C) button is pressed halfway. Use for subjects that are in
motion. Eye-detection AF is not available.
Manual: Focus manually using the lens focus ring. Choose
M for manual control of focus or in situations in which the
(manual)
camera is unable to focus using autofocus (P 87).
Taking Photographs
N Regardless of the option selected, manual focus will be
used when the lens is in manual focus mode.
If ON is selected for G AF/MF SETTING > PRE-AF, focus will be adjusted continuously in modes S and C even
when the shutter button is not pressed.
78
Autofocus
The Focus Indicator
The focus indicator turns green when
the subject is in focus and blinks white
when the camera is unable to focus.
Brackets (“( )”) indicate that the camera
 
is focusing and are displayed continu- Focus indicator
ously in mode C. j is displayed in manual focus mode.

Taking Photographs
79
Autofocus Options (AF Mode)
Choose how the camera focuses in modes S and C.
Press MENU/OK and go to the shooting menu.
Select G AF/MF SETTING > AF MODE.
Choose an AF mode.
N This feature can also be accessed via shortcuts (P 246).
How the camera focuses depends on the focus mode.
Focus Mode S (AF-S)
Option
Description
Taking Photographs
r Camera focuses on subject in
SINGLE selected focus point. Use for pinPOINT point focus on selected subject.
ZONE
WIDE
80
Camera focuses on subject in selected focus zone. Focus zones
include multiple focus points, making it easier to focus on subjects in
motion.
Camera focuses automatically on
high-contrast subjects; display
shows areas in focus.
Sample image
Autofocus
Option
ALL
Description
Sample image
Rotate the rear command dial in the focus-point selection display (P 83, 84) to cycle through AF modes
in the following order: r SINGLE POINT, y ZONE,
and z WIDE.
Focus Mode C (AF-C)
Option
Description
Sample image
r Focus tracks subject at selected foSINGLE cus point. Use for subjects moving
POINT toward or away from camera.
ZONE
Focus tracks subject in selected focus zone. Use for subjects that are
moving fairly predictably.
Taking Photographs
z Focus tracks subjects moving
TRACKING through wide area of frame.
ALL
Rotate the rear command dial in the focus-point selection display (P 83, 84) to cycle through AF modes
in the following order: r SINGLE POINT, y ZONE,
and z TRACKING.
81
Focus-Point Selection
Choose a focus point for autofocus.
Viewing the Focus-Point Display
Press MENU/OK and go to the shooting menu.
Use the focus stick (focus lever) and rear command dial to choose a focus area (P 83).
Select G AF/MF SETTING > FOCUS AREA to view
the focus-point display.
N The focus point can also be selected using touch con-
Taking Photographs
trols (P 22).
82
Autofocus
Selecting a Focus Point
Use the focus stick (focus lever)
to choose the focus point and the
rear command dial to choose the
size of the focus frame. The procedure varies with the option selected for AF mode.
Focus stick
AF mode
Press
Rotate
Choose from
6 frame sizes
Select focus Select center
Choose from
point
focus point
3 frame sizes
Press
Restore original
size
—
N Manual
focus-point selection is not available when
z WIDE/TRACKING is selected in focus mode S.
If j ALL is selected for AF mode, you can rotate the
rear command dial in the focus-point selection display
(P 84) to cycle through AF modes in the following order: r SINGLE POINT (6 frame sizes), y ZONE
(3 frame sizes), and either z WIDE (focus mode S) or
z TRACKING (focus mode C).
83
Taking Photographs
Tilt
Rear command dial
The Focus-Point Display
The focus-point display varies with the option selected for AF mode.
N Focus frames are shown by small squares (), focus
zones by the large squares.
r SINGLE POINT
AF mode
y ZONE
z WIDE/TRACKING
Taking Photographs
Number of points Choose from zones Position focus frame
available can be select- with 7 × 7, 5 × 5, or over subject and press
ed using G AF/MF 3 × 3 focus points. MENU/OK.
SETTING > NUMBER
OF FOCUS POINTS.
Available Focus Points
TTL contrast-detect AF offers more focus
points (A) than intelligent hybrid AF
(B), which combines phase-detection
with TTL contrast-detect AF.
84
Autofocus
Burst Mode Focus-Frame Selection
When continuous high-speed (8.0 fps, 11 fps, 14 fps) is selected
for drive mode, the number of focus frames available in focus
mode C drops.
Single point
Zone
Tracking
85
Taking Photographs
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below.
• Very shiny subjects such as mirrors or car bodies.
• Subjects photographed through a window or other reflective object.
• Dark subjects and subjects that absorb rather than reflect
light, such as hair or fur.
• Insubstantial subjects, such as smoke or flame.
• Subjects that show little contrast with the background.
• Subjects positioned in front of or behind a high-contrast
object that is also in the focus frame (for example, a subject
photographed against a backdrop of highly contrasting elements).
Autofocus
Checking Focus
To zoom in on the current focus area
for precise focus, press the center of the
rear command dial. Press the center of
the rear command dial again to cancel
zoom.
㹋
Normal display
㹋
Focus zoom
N In focus mode S, zoom can be adjusted by rotating the
Taking Photographs
rear command dial when STANDARD or FOCUS PEAK
HIGHLIGHT is selected for G AF/MF SETTING > MF
ASSIST (P 142). Focus zoom is not available in focus
mode C or when G AF/MF SETTING > PRE-AF is on or
an option other than r SINGLE POINT is selected for
AF MODE.
Use D BUTTON/DIAL SETTING > FUNCTION (Fn)
SETTING to change the function performed by the
center of the rear command dial or assign its default
function to other controls.
86
Manual Focus
Adjust focus manually.
Rotate the focus mode selector
to M.
j will appear in the display.
㹋
Focus manually using the lens
focus ring. Rotate the ring left
to reduce the focus distance,
right to increase.
Take pictures.


Taking Photographs

N Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the direction of rotation of the focus ring.
Regardless of the option selected, manual focus will be
used when the lens is in manual focus mode.
87
Quick Focus
To use autofocus to focus on the subject in the selected focus area, press the button to which focus lock or AF-ON has
been assigned (the size of the focus area can be chosen with
the rear command dial). In manual focus mode, you can use
this feature to quickly focus on a chosen subject using either
single or continuous AF according to the option chosen for
G AF/MF SETTING > INSTANT AF SETTING.
Taking Photographs
88
Manual Focus
Checking Focus
A variety of options are available for checking focus
in manual focus mode.
Focus Zoom
If ON is selected for G AF/MF SETTING > FOCUS
CHECK, the camera will automatically zoom in on the
selected focus area when the focus ring is rotated.
Press the center of the rear command dial to exit zoom.
N If STANDARD or FOCUS PEAK HIGHLIGHT is selected
for G AF/MF SETTING > MF ASSIST, zoom can be adjusted by rotating the rear command dial.
89
Taking Photographs
The Manual Focus Indicator
The manual focus indicator indi- Focus distance
(white line)
cates how closely the focus distance matches the distance to the
subject in the focus brackets. The  
white line indicates the distance
Depth of field
to the subject in the focus area (in
meters or feet according to the option selected for 5
D SCREEN SET-UP > FOCUS SCALE UNITS in the setup menu), the blue bar the depth of field, or in other
words the distance in front of and behind the subject
that appears to be in focus.
Manual Focus
MF Assist
The G AF/MF SETTING > MF ASSIST option can be
used to check focus when pictures are framed in the
LCD monitor or electronic viewfinder in manual focus
mode.
N The MF ASSIST menu can be displayed by pressing and
holding the center of the rear command dial.
Taking Photographs
The following options are available:
• FOCUS PEAK HIGHLIGHT: Highlights
high-contrast outlines. Rotate
5 the focus ring until the subject is
highlighted.
• DIGITAL SPLIT IMAGE: Displays a split
image in the center of the frame.
Frame the subject in the split-image area and rotate the focus ring
until the four parts of the split image are correctly aligned.
90
d Exposure Compensation
Adjust exposure.
Rotate the exposure compensation dial.
O The amount of compensation available varies with the shooting mode.
C (Custom)
When the exposure compensation
dial is rotated to C, exposure compensation can be adjusted by rotating the front command dial.
Taking Photographs
set
N The front command dial can be used to set exposure
compensation to values between −5 and +5 EV.
The front command dial can be used to set aperture, exposure compensation, or (when ON is selected for ISO
COMMAND DIAL SETTING) sensitivity. Press the dial to
toggle between the different settings.
91
Focus/Exposure Lock
Compose photographs with off-center subjects.
Taking Photographs
Focus: Position the subject in
the focus frame and press the
shutter button halfway to lock
focus and exposure. Focus and
exposure will remain locked
while the shutter button is
pressed halfway (AF/AE lock).
Recompose: Keep the shutter
button pressed halfway.
Shoot: Press the button all the way down.
N Focus lock using the shutter button is only available
when ON is selected for D BUTTON/DIAL SETTING >
SHUTTER AF, SHUTTER AE.
92
Focus/Exposure Lock
The AF-L and AE-L Buttons
Focus and exposure can also be
locked with the AF-L and AE-L buttons. At default settings, the AF-L
button locks focus, the AE-L button
exposure. Focus and/or exposure
will remain locked while the button is pressed, whether or not the
shutter button is pressed halfway.
Taking Photographs
The roles of the buttons can be changed using the
following D BUTTON/DIAL SETTING options:
• FUNCTION (Fn) SETTING: Choose the roles played
by the AE-L and AF-L buttons.
• AE/AF-LOCK MODE: If AE&AF ON/OFF SWITCH is
selected for AE/AF-LOCK MODE, focus and/or exposure lock when the button is pressed and remain
locked until the button is pressed again.
93
BKT Bracketing
Automatically vary settings over a series of pictures.
Press the DRIVE button to display drive mode options.
Choose a bracketing type and (if W ISO BKT or
V WHITE BALANCE BKT is selected) a bracketing amount.
Press MENU/OK to end drive mode selection.
Taking Photographs
94
Take photographs.
Bracketing
O AE BKT
Use A SHOOTING SETTING > AE BKT SETTING to
choose the bracketing amount and number of shots.
Each time the shutter button is pressed, the camera
will take the specified number of shots: one using the
metered value for exposure and the others over- or
under-exposed by multiples of the selected bracketing amount (P 154).
N Regardless of the bracketing amount, exposure will not
exceed the limits of the exposure metering system.
Taking Photographs
W ISO BKT
Select a bracketing amount (±1, ±2⁄3, or ±1⁄3). Each
time the shutter is released, the camera will take a
picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised
and the other with sensitivity lowered by the selected amount.
X FILM SIMULATION BKT
Each time the shutter is released, the camera takes one
shot and processes it to create copies with different
film simulation settings, chosen using A SHOOTING
SETTING > FILM SIMULATION BKT (P 154).
95
Bracketing
V WHITE BALANCE BKT
Select a bracketing amount (Âą1, Âą2, or Âą3). Each time
the shutter is released, the camera takes one shot
and processes it to create three copies: one at the
current white balanced setting, one with fine-tuning
increased by the selected amount, and another with
fine-tuning decreased by the selected amount.
Taking Photographs
Y DYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges:
5 100% for the first, 200% for the second, and 400% for
the third.
N While dynamic range bracketing is in effect, sensitivity
will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200 to 800 when an auto option is selected
for sensitivity); the sensitivity previously in effect is restored when bracketing ends.
96
I Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
Press the DRIVE button to display drive mode options.
Select I CONTINUOUS and choose a frame advance rate.
Take photographs. The camera will take pictures
while the shutter button is pressed; shooting 5
ends when the shutter button is released or the
memory card is full.
O If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new
folder.
Burst shooting may not begin if the space available on
the memory card is insufficient.
Frame rate varies with the subject, shutter speed, sensitivity, and focus mode. Frame rates may slow and recording times increase as more shots are taken.
The flash turns off automatically; the previously-selected
flash mode is restored when burst shooting is disabled.
97
Taking Photographs
Continuous Shooting (Burst Mode)
Focus and Exposure
Select focus mode C to vary focus with shot; to vary exposure
with each shot, select OFF for D BUTTON/DIAL SETTING >
SHUTTER AE.
N Selecting a frame rate of 8.0, 11, or 14 fps restricts the
choice of focus frames in focus mode C and limits
Intelligent Face Detection to the area used for intelligent
hybrid AF (TTL contrast-detect AF+phase-detection AF;
P 84).
Exposure and focus tracking performance may vary with
such factors as aperture, sensitivity, and exposure compensation.
Taking Photographs
98
Y Advanced Filters
Take photos with filter effects.
Press the DRIVE button to display drive mode options.
Highlight Y ADVANCED FILTER and press
MENU/OK to display advanced filter options.
Highlight an advanced filter and press MENU/OK to
select the highlighted option and exit to shoot- 5
ing mode.
Take photographs.
N When the auto mode selector lever is rotated to AUTO,
you can rotate the front command dial to choose a filter
in the shooting display.
99
Taking Photographs
Advanced Filters
Advanced Filter Options
Choose from the following filters:
Filter
G TOY CAMERA
H MINIATURE
I POP COLOR
J HIGH-KEY
Z LOW-KEY
5 K DYNAMIC TONE
Taking Photographs
X SOFT FOCUS
u PARTIAL COLOR (RED)
v PARTIAL COLOR (ORANGE)
w PARTIAL COLOR (YELLOW)
x PARTIAL COLOR (GREEN)
y PARTIAL COLOR (BLUE)
z PARTIAL COLOR (PURPLE)
Description
Choose for a retro toy camera effect.
The tops and bottoms of pictures are
blurred for a diorama effect.
Create high-contrast images with saturated colors.
Create bright, low-contrast images.
Create uniformly dark tones with few
areas of emphasized highlights.
Dynamic tone expression is used for a
fantasy effect.
Create a look that is evenly soft
throughout the whole image.
Areas of the image that are the selected color are recorded in that color. All
other areas of the image are recorded
in black-and-white.
N Depending on the subject and camera settings, images
may in some cases be grainy or vary in brightness or hue.
100
j Multiple Exposures
Create a photograph that combines two exposures.
Press the DRIVE button to display drive mode options.
Select Adv., then highlight j MULTIPLE EXPOSURE
and press MENU/OK to select the highlighted option
and return to shooting mode.
Take the first shot.
101
Taking Photographs
Multiple Exposures
Press MENU/OK. The first shot
will be shown superimposed
on the view through the lens
and you will be prompted to
take the second shot.
NEXT
RETRY
EXIT
N To return to Step 3 and retake the first shot, press
the focus stick (focus lever) left. To save the first shot
and exit without creating a multiple exposure, press
DISP/BACK.
Take the second shot, using
the first frame as a guide.
EXIT
Taking Photographs
30
Press MENU/OK to create the
multiple exposure, or press the
focus stick left to return to Step
5 and retake the second shot.
102
2.0
RETRY
EXIT
u Panoramas
Follow an on-screen guide to create a panorama.
Press the DRIVE button to display drive mode options.
Select Adv., then highlight u PANORAMA and
press MENU/OK to select the highlighted option
and return to shooting mode.
To select the size of the angle through which you 5
will pan the camera while shooting, press the
focus stick (focus lever) left. Highlight a size and
press MENU/OK.
Press the focus stick right to view a choice of pan
directions. Highlight a pan direction and press
MENU/OK.
Press the shutter button all the way down to start
recording. There is no need to keep the shutter
button pressed during recording.
103
Taking Photographs
6
Pan the camera in the direction
shown by the arrow. Shooting
ends automatically when the
camera is panned to the end of
the guides and the panorama
is complete.
Sweep camera along yellow
line in direction of y
ANGLE
DIRECTION
Taking Photographs
For Best Results
For best results, use a lens with a focal length of 35 mm or less
(50 mm or less in 35 mm format). Prop your elbows against
your sides and move the camera slowly in a small circle at a
steady speed, keeping the camera parallel or at right angles
to the horizon and being careful only to pan in the direction
shown by the guides. Use a tripod for best results. If the desired results are not achieved, try panning at a different speed.
104
Panoramas
If the shutter button is pressed all the way down before the panorama is complete, shooting will end and
no panorama may be recorded. Shooting may also be
interrupted if the camera is panned too quickly or too
slowly. Panning the camera in a direction other than that
shown cancels shooting.
The desired results may not be achieved with moving
subjects, subjects close to the camera, unvarying subjects such as the sky or a field of grass, subjects that are
in constant motion, such as waves and waterfalls, or
subjects that undergo marked changes in brightness.
Panoramas may be blurred if the subject is poorly lit.
105
Taking Photographs
Panoramas are created from multiple frames; if ON is
selected for D BUTTON/DIAL SETTING > SHUTTER
AE, exposure for the entire panorama is determined by
the first frame. The camera may in some cases record
an greater or lesser angle than selected or be unable to
stitch the frames together perfectly. The last part of the
panorama may not be recorded if shooting ends before
the panorama is complete.
Panoramas
Viewing Panoramas
In full-frame playback, you can use the rear command dial to
zoom panoramas in or out. Alternatively, you can play the
panorama back using the focus stick (focus lever).
PLAY
STOP
PAUSE
Taking Photographs
Press the focus stick down to start playback and press again to
pause. Press the focus stick left or right to change the pan direction while playback is in progress or to scroll the panorama
while playback is paused; vertical panoramas will scroll vertically, horizontal panoramas horizontally. To exit to full-frame
playback, press the focus stick up.
106
Flash Photography
Use the supplied EF-X8 shoe-mounted flash
unit for additional lighting at night or indoors
under low light.
Slide the flash onto the hot
shoe as shown, stopping when
it clicks into place.
Raise the flash.
O If the flash is not raised, set-
Select F FLASH SETTING >
FLASH FUNCTION SETTING in
the camera menus to display
options for the EF-X8.
Taking Photographs
tings will be adjusted for units
connected via the sync terminal (P 263).
FLASH SETTING
FLASH FUNCTION SETTING
RED EYE REMOVAL
TTL-LOCK MODE
LED LIGHT SETTING
MASTER SETTING
CH SETTING
EXIT
N This
feature can also be accessed via shortcuts
(P 246).
107
4
Highlight items using the focus stick (focus lever) and rotate the rear command dial to
change the highlighted setting
(P 109).
MODE
SUPPLIED FLASH
ADJUST
END
Press DISP/BACK to put the changes into effect.
O Depending on the distance to the subject, some lenses
may cast shadows in photos taken with the flash.
The flash will not fire at some settings, for example in
panorama mode or when the electronic shutter is used.
Taking Photographs
Choose shutter speeds slower than 180X when using
the flash in exposure mode S (shutter-priority AE) or
manual (M).
N In TTL mode, the flash may fire several times with each
shot. Do not move the camera until shooting is complete.
108
Flash Photography
Flash Settings
The following settings are
available when the supplied EF-X8 shoe-mounted flash unit is attached.
MODE
SUPPLIED FLASH
ADJUST
Setting
mode
Description
Choose from the following options:
• TTL: TTL mode. Adjust flash compensation (B)
and choose a flash mode (C).
• M: The flash fires at the selected output (B) regardless of subject brightness or camera settings.
Output is expressed in fractions of full power,
from ⁄ to ⁄. The desired results may not be
achieved at low values if they exceed the limits
of the flash control system; take a test shot and
check the results.
• C (COMMANDER): Choose if the flash is being
used to control remote synced flash units, for example as part of a studio flash system.
• D (OFF): The EF-X8 does not fire. Flash units
connected via the sync terminal will still re
when the shutter is released, but can be disabled
by lowering the EF-X8 and turning the units off in
the flash settings menu.
109
Taking Photographs
A Flash control
END
Setting
Description
Adjust flash level. The options available vary with
sation/output the flash control mode (A).
Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S,
A, or M) selected.
• E (FLASH AUTO): The flash fires only as required;
flash level is adjusted according to subject
brightness. A p icon displayed when the shutter button is pressed halfway indicates that the
flash will fire when the photo is taken.
C Flash mode • F (STANDARD): The flash fires with every shot if
(TTL)
possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully
charged when the shutter is released.
• G (SLOW SYNC.): Combine the flash with slow
shutter speeds when photographing portrait
subjects against a backdrop of night scenery.
The flash will not fire if not fully charged when
the shutter is released.
Choose whether the flash is timed to fire immediately after the shutter opens (H/1ST CURTAIN)
or immediately before it closes (I/2ND CURTAIN).
D Sync
1ST CURTAIN is recommended in most circumstances.
B Flash compen-
Taking Photographs
110
Flash Photography
Red-Eye Removal
Red-eye removal is available when an option other than OFF
is selected for F FLASH SETTING > RED EYE REMOVAL and
G AF/MF SETTING > FACE/EYE DETECTION SETTING is
ON. Red-eye removal minimizes “red-eye” caused when light
from the flash is reflected from the subject’s retinas.
Flash Sync Speed
The flash will synchronize with the shutter at shutter speeds
of 1⁄180 s or slower.
Optional Flash Units from FUJIFILM
The camera can be used with optional FUJIFILM shoe-mounted flash units.
111
Taking Photographs
Third-Party Flash Units
Do not use third-party flash units that apply over 300 V to the
camera hot shoe.
MEMO
112
The Shooting Menus
113
H IMAGE QUALITY SETTING
Adjust image quality settings.
To display image quality settings,
press MENU/OK in the shooting
display and select the H (IMAGE
QUALITY SETTING) tab.
IMAGE QUALITY SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
GRAIN EFFECT
DYNAMIC RANGE
WHITE BALANCE
HIGHLIGHT TONE
EXIT
N The options available vary with the shooting mode selected.
The Shooting Menus
114
IMAGE QUALITY SETTING
IMAGE SIZE
Choose the size and aspect ratio at which still pictures are recorded.
Option
O3:2
P3:2
Q3:2
Image size Option
6000 × 4000 O 16 : 9
4240 × 2832 P 16 : 9
3008 × 2000 Q 16 : 9
Image size Option
6000 × 3376 O 1 : 1
4240 × 2384 P 1 : 1
3008 × 1688 Q 1 : 1
Image size
4000 × 4000
2832 × 2832
2000 × 2000
N IMAGE SIZE is not reset when the camera is turned off
or another shooting mode is selected.
115
The Shooting Menus
Aspect Ratio
Pictures with an aspect ratio of 3∜2 have the same proportions as a frame of 35 mm film, while an aspect ratio of 16∜9
is suited to display on High Definition (HD) devices. Pictures
with an aspect ratio of 1∜1 are square.
IMAGE QUALITY
Choose a file format and compression ratio. Select
FINE or NORMAL to record JPEG images, RAW to record RAW images, or FINE+RAW or NORMAL+RAW
to record both JPEG and RAW images. FINE and
FINE+RAW use lower JPEG compression ratios for
higher-quality JPEG images, while NORMAL and
NORMAL+RAW use higher JPEG compression ratios
to increase the number of images that can be stored.
The Shooting Menus
The Function Buttons
To toggle RAW image quality on or off for a single shot, assign
RAW to a function button (P 254). If a JPEG option is currently selected for image quality, pressing the button temporarily selects the equivalent JPEG+RAW option. If a JPEG+RAW
option is currently selected, pressing the button temporarily
selects the equivalent JPEG option, while if RAW is selected,
pressing the button temporarily selects FINE. Taking a picture
or pressing the button again restores the previous setting.
116
IMAGE QUALITY SETTING
RAW RECORDING
Choose whether to compress RAW images.
Option
Description
UNCOMPRESSED RAW images are not compressed.
RAW images are compressed using a reversible
algorithm that reduces le size with no loss of imLOSSLESS
age data. The images can be viewed in RAW FILE
COMPRESSED
CONVERTER EX 2.0 or other software that supports
“lossless” RAW compression.
The Shooting Menus
117
FILM SIMULATION
Simulate the effects of different kinds of film, including black-and-white (with or without color filters).
Choose a palette according to your subject and creative intent.
Option
c PROVIA/
STANDARD
d Velvia/VIVID
e ASTIA/SOFT
The Shooting Menus
i CLASSIC
CHROME
g PRO Neg. Hi
h PRO Neg. Std
118
Description
Standard color reproduction. Suited to a wide
range of subjects, from portraits to landscapes.
A high-contrast palette of saturated colors,
suited to nature photos.
Enhances the range of hues available for skin
tones in portraits while preserving the bright
blues of daylight skies. Recommended for outdoor portrait photography.
Soft color and enhanced shadow contrast for
a calm look.
Offers slightly more contrast than h PRO
Neg. Std. Recommended for outdoor portrait
photography.
A soft-toned palette. The range of hues available for skin tones is enhanced, making this a
good choice for studio portrait photography.
IMAGE QUALITY SETTING
Option
Description
Take black-and-white photos with rich grada*
a ACROS
tion and outstanding sharpness.
b MONOCHROME * Take pictures in standard black and white.
Take pictures in sepia.
f SEPIA
* Available with yellow (Ye), red (R), and green (G) lters, which
deepen shades of gray corresponding to hues complementary
to the selected color. The yellow (Ye) lter deepens purples and
blues and the red (R) lter blues and greens. The green (G) lter
deepens reds and browns, including skin tones, making it a good
choice for portraits.
N The only options available when the auto mode selector
lever is rotated to AUTO are c, b, and f.
Film simulation settings can also be accessed via shortcuts (P 246).
For more information, visit: http://fujifilm-x.com/en/x-stories/
the-world-of-film-simulation-episode-1/
119
The Shooting Menus
Film simulation options can be combined with tone and
sharpness settings.
GRAIN EFFECT
Add a film grain effect. Select an amount (STRONG
or WEAK) or choose OFF to turn film grain off.
STRONG
The Shooting Menus
120
Options
WEAK
OFF
IMAGE QUALITY SETTING
DYNAMIC RANGE
Control contrast. Choose lower values to increase
contrast when shooting indoors or under overcast
skies, higher values to reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended for
scenes that include both sunlight and deep shade,
for such high-contrast subjects as sunlight on water, brightly-lit autumn leaves, and portraits taken
against a blue sky, and for white objects or people
wearing white; note, however, that mottling may appear in pictures taken at higher values.
Options
V 100%
W 200%
X 400%
N If AUTO is selected, the camera will automatically choose
either V 100% or W 200% according to the subject
and shooting conditions. Shutter speed and aperture
will be displayed when the shutter button is pressed
halfway.
W 200% is available at sensitivities of ISO 400 and
above, X 400% at sensitivities of ISO 800 and above.
121
The Shooting Menus
AUTO
WHITE BALANCE
For natural colors, choose a white balance option
that matches the light source.
The Shooting Menus
Option
Description
AUTO
White balance is adjusted automatically.
k/l/m Measure a value for white balance.
Choose a color temperature.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
Reduces the blue cast typically associated with ung
derwater lighting.
N Results vary with shooting conditions. Play pictures back
after shooting to check colors.
White balance is adjusted for flash lighting only in AUTO
and g modes. Turn the flash off using other white balance options.
White balance options can also be accessed via shortcuts (P 246).
122
IMAGE QUALITY SETTING
Fine-Tuning White Balance
Pressing MENU/OK after selecting a
white balance option displays the
dialog shown at right; use the focus stick (focus lever) to fine-tune
white balance or press DISP/BACK to
exit without fine-tuning.
WB SHIFT
AUTO
R:0 B:0
SET
N The focus stick (focus lever) does not tilt diagonally.
The Shooting Menus
123
Custom White Balance
Choose k, l, or m to adjust
white balance for unusual lighting
conditions. White balance measurement options will be displayed;
frame a white object so that it fills
the display and press the shutter button all the way
down to measure white balance (to select the most recent custom value and exit without measuring white
balance, press DISP/BACK, or press MENU/OK to select the
most recent value and display the fine-tuning dialog).
• If “COMPLETED!” is displayed, press MENU/OK to set white
balance to the measured value.
6 If “UNDER” is displayed, raise exposure compensation
•
and try again.
• If “OVER” is displayed, lower exposure compensation
and try again.
CUSTOM 1
SHUTTER : NEW WB
SHIFT
The Shooting Menus
124
NOT CHANGE
IMAGE QUALITY SETTING
k: Color Temperature
Selecting k in the white balance menu displays a list of color
temperatures; highlight a color
temperature and press MENU/OK to
select the highlighted option and
display the fine-tuning dialog.
WHITE BALANCE
COLOR TEMPERATURE
R:0 B:0
SET
SHIFT
125
The Shooting Menus
Color Temperature
Color temperature is an objective measure of the color of a
light source, expressed in Kelvin (K). Light sources with a color temperature close to that of direct sunlight appear white;
light sources with a lower color temperature have a yellow
or red cast, while those with a higher color temperature are
tinged with blue. You can match color temperature to the
light source, or choose options that differ sharply from the
color of the light source to make pictures “warmer” or “colder.”
HIGHLIGHT TONE
Adjust the appearance of highlights. Choose from
seven options between +4 and −2.
+4
+3
+2
Options
+1
−1
−2
6 SHADOW TONE
The Shooting Menus
Adjust the appearance of shadows. Choose from seven options between +4 and −2.
+4
126
+3
+2
Options
+1
−1
−2
IMAGE QUALITY SETTING
COLOR
Adjust color density. Choose from nine options between +4 and −4.
+4
+3
+2
+1
Options
−1
−2
−3
−4
+4
+3
+2
+1
Options
−1
−2
−3
−4
127
The Shooting Menus
SHARPNESS
Sharpen or soften outlines. Choose from nine options between +4 and −4.
NOISE REDUCTION
Reduce noise in pictures taken at high sensitivities.
Choose from nine options between +4 and −4.
+4
+3
+2
+1
Options
−1
−2
−3
−4
6 LONG EXPOSURE NR
The Shooting Menus
Select ON to reduce mottling in long time-exposures.
Options
ON
128
OFF
IMAGE QUALITY SETTING
LENS MODULATION OPTIMIZER
Select ON to improve definition by adjusting for diffraction and the slight loss of focus at the periphery
of the lens.
Options
ON
OFF
The Shooting Menus
COLOR SPACE
Choose the gamut of colors available for color reproduction.
Option
Description
sRGB
Recommended in most situations.
Adobe RGB For commercial printing.
129
PIXEL MAPPING
Use this option if you notice bright spots in your pictures.
Press MENU/OK in the shooting display and select
the H IMAGE QUALITY SETTING tab.
Highlight PIXEL MAPPING and press MENU/OK to
perform pixel mapping. Processing may take a
few seconds.
O Results are not guaranteed.
Be sure the battery is fully charged before beginning pixel mapping.
The Shooting Menus
Pixel mapping is not available when the camera temperature is elevated.
130
IMAGE QUALITY SETTING
SELECT CUSTOM SETTING
Recall settings saved with EDIT/SAVE CUSTOM
SETTING. Settings can be recalled from any of the
seven custom settings banks.
Banks
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
CUSTOM 5
CUSTOM 6
CUSTOM 7
Press MENU/OK in shooting mode to display the
shooting menu. Select the H IMAGE QUALITY
SETTING tab, then highlight EDIT/SAVE CUSTOM
SETTING and press MENU/OK.
131
The Shooting Menus
EDIT/SAVE CUSTOM SETTING
Save up to 7 sets of custom camera settings for commonly-encountered situations. Saved settings can
be recalled using H IMAGE QUALITY SETTING >
SELECT CUSTOM SETTING.
IMAGE QUALITY SETTING
Highlight a custom settings
bank and press MENU/OK to select.
Adjust the following as desired:
• ISO
• DYNAMIC RANGE
• FILM SIMULATION
• GRAIN EFFECT
• WHITE BALANCE
• HIGHLIGHT TONE
• SHADOW TONE
• COLOR
• SHARPNESS
• NOISE REDUCTION
Press DISP/BACK. A confirmation
dialog will be displayed; highlight OK and press MENU/OK.
IMAGE QUALITY SETTING
CUSTOM 1
SELECT CUSTOM SETTING
EDIT/SAVE CUSTOMCUSTOM
SETTING2
CUSTOM 3
CUSTOM 4
CUSTOM 5
CUSTOM 6
CUSTOM 7
CUSTOM 1
SAVE CURRENT SETTINGS
ISO
DYNAMIC RANGE
FILM SIMULATION
GRAIN EFFECT
WHITE BALANCE
HIGHLIGHT TONE
SHADOW TONE
EXIT
SAVE CUSTOM SETTING
CUSTOM 1 SET OK?
OK
CANCEL
The Shooting Menus
N To store current camera settings in the selected bank,
highlight SAVE CURRENT SETTINGS in Step 3 and press
MENU/OK. Banks can be renamed using EDIT CUSTOM
NAME.
To restore default settings for the current bank, select
RESET.
132
G AF/MF SETTING
Adjust focus settings.
To display focus settings, press
MENU/OK in the shooting display
and select the G (AF/MF SETTING)
tab.
AF/MF SETTING
FOCUS AREA
AF MODE
AF-C CUSTOM SETTINGS
STORE AF MODE BY ORIENTATION
AF POINT DISPLAY
NUMBER OF FOCUS POINTS
PRE-AF
AF ILLUMINATOR
EXIT
N The options available vary with the shooting mode selected.
The Shooting Menus
FOCUS AREA
Choose the focus area for autofocus, manual focus,
and focus zoom.
133
AF MODE
Choose the AF mode for focus modes S and C.
Option
The Shooting Menus
Description
The camera focuses on the subject in the selected focus
r point. The number of focus points available can be selectSINGLE
ed using G AF/MF SETTING > NUMBER OF FOCUS
POINT
POINTS. Use for pin-point focus on a selected subject.
The camera focuses on the subject in the selected focus
y zone. Focus zones include multiple focus points, makZONE
ing it easier to focus on subjects that are in motion.
In focus mode C, the camera tracks focus on the subject
in the selected focus point while the shutter button is
z pressed halfway. In focus mode S, the camera automatiWIDE/ cally focuses on high-contrast subjects; the areas in focus
TRACKING are shown in the display. The camera may be unable
to focus on small objects or subjects that are moving
rapidly.
Rotate the rear command dial in the focus-point selecj tion display (P 83, 84) to cycle through AF modes
ALL in the following order: r SINGLE POINT, y ZONE,
and z WIDE/TRACKING.
134
AF/MF SETTING
AF-C CUSTOM SETTINGS
Select focus-tracking options for
focus mode C. Choose from Sets
1–5 according to your subject.
AF-C CUSTOM SETTINGS
SET 1 STANDARD SETTING FOR MULTI-PURPOSE
OK
Option
SET 1 STANDARD
SETTING FOR
MULTI-PURPOSE
Description
A standard tracking option that works well with
the typical range of moving subjects.
135
The Shooting Menus
The focus system attempts to track the chosen
SET 2 IGNORE
subject. Choose with subjects that are hard to
OBSTACLES & CONTINUE
keep in the focus area or if other objects are
TO TRACK SUBJECT
likely to enter the focus area with the subject.
SET 3 FOR
The focus system attempts to compensate for
ACCELERATING/
subject acceleration or deceleration. Choose
DECELERATING SUBJECT for subjects prone to rapid changes in velocity.
The focus system attempts to focus quickly on
SET 4 FOR
subjects entering the focus area. Choose for
SUDDENLY APPEARING
subjects that appear abruptly or when rapidly
SUBJECT
switching subjects.
SET 5 FOR
Choose for hard-to-track subjects prone not only
ERRATICALLY MOVING & to sudden changes in velocity but also to large
ACCEL./DECEL. SUBJECT movements front to back and left to right.
STORE AF MODE BY ORIENTATION
Choose whether the focus mode and focus area used
when the camera is in portrait orientation are stored
separately from those used when the camera is in
landscape orientation.
Option
OFF
Description
The same settings are used in both orientations.
The focus area for each orientation can be selectFOCUS AREA ONLY
ed separately.
The focus mode and focus area can be selected
ON
separately.
6 AF POINT DISPLAY yz
The Shooting Menus
Choose whether individual focus frames are displayed when ZONE or WIDE/TRACKING is selected
for G AF/MF SETTING > AF MODE.
Options
ON
136
OFF
AF/MF SETTING
NUMBER OF FOCUS POINTS
Choose the number of focus points available for focus-point selection in manual focus mode or when
SINGLE POINT is selected for AF MODE.
Option
91 POINTS
(7 × 13)
325 POINTS
(13 × 25)
Description
Choose from 91 focus points arranged in a 7- by 13-point
grid.
Choose from 325 focus points arranged in a 13- by
25-point grid.
The Shooting Menus
PRE-AF
If ON is selected, the camera will continue to adjust
focus even when the shutter button is not pressed
halfway. Note that this increases the drain on the
battery.
Options
ON
OFF
137
AF ILLUMINATOR
If ON is selected, the AF-assist illuminator will light to
assist autofocus.
Options
ON
OFF
O The camera may be unable to focus using the AF-assist
illuminator in some cases. If the camera is unable to focus, try increasing the distance to the subject.
Avoid shining the AF-assist illuminator directly into your
subject’s eyes.
The Shooting Menus
138
AF/MF SETTING
Option
FACE ON/EYE OFF
FACE ON/
EYE AUTO
FACE ON/RIGHT
EYE PRIORITY
FACE ON/LEFT EYE
PRIORITY
FACE OFF/EYE OFF
Description
Intelligent Face Detection only.
The camera automatically chooses which eye to
focus on when a face is detected.
The camera focuses on the right eye of subjects
detected using Intelligent Face Detection.
The camera focuses on the left eye of subjects
detected using Intelligent Face Detection.
Intelligent Face Detection and eye priority off.
139
The Shooting Menus
FACE/EYE DETECTION SETTING
Intelligent Face Detection sets focus and exposure for human faces
anywhere in the frame, preventing
the camera from focusing on the
background in group portraits. Choose for shots that
emphasize portrait subjects. Faces can be detected
with the camera in vertical or horizontal orientation;
if a face is detected, it will be indicated by a green
border. If there is more than one face in the frame,
the camera will select the face closest to the center;
other faces are indicated by white borders. You can
also choose whether the camera detects and focuses on eyes when Intelligent Face Detection is on. 6
Choose from the following options:
O In some modes, the camera may set exposure for the
frame as a whole rather than the portrait subject.
If the subject moves as the shutter button is pressed, the
face may not be in the area indicated by the green border when the picture is taken.
N If the camera is unable to detect the subject’s eyes because they are hidden by hair, glasses, or other objects,
the camera will instead focus on faces.
Face/eye detection options can also be accessed via
shortcuts (P 246).
The Shooting Menus
140
AF/MF SETTING
AF+MF
If ON is selected in focus mode S, focus can be adjusted manually by rotating the focus ring while the
shutter button is pressed halfway. Both standard and
focus peaking MF assist options are supported.
Options
ON
OFF
O Lenses with a focus distance indicator must be set to
manual focus mode (MF) before this option can be used.
Selecting MF disables the focus distance indicator. Set
the focus ring to the center of the focus distance indicator, as the camera may fail to focus if the ring is set to
infinity or the minimum focus distance.
141
The Shooting Menus
AF + MF Focus Zoom
When ON is selected for G AF/MF SETTING > FOCUS CHECK
and SINGLE POINT selected for AF MODE, focus zoom can
be used to zoom in on the selected focus area. The zoom ratio (2.5× or 6×) can be selected using the rear command dial.
MF ASSIST
Choose how focus is displayed in manual focus mode.
Option
STANDARD
DIGITAL
SPLIT IMAGE
FOCUS PEAK
HIGHLIGHT
Description
Focus is displayed normally (focus peaking and digital
split image are not available).
Displays a black-and-white (MONOCHROME) or
color (COLOR) split image in the center of the frame.
Frame the subject in the split-image area and rotate
the focus ring until the three parts of the split image
are correctly aligned.
The camera heightens high-contrast outlines. Choose
a color and peaking level.
N You can also choose MF assist options by holding the
center of the rear command dial.
The Shooting Menus
142
AF/MF SETTING
FOCUS CHECK
If ON is selected, the display will automatically zoom
in on the selected focus area when the focus ring is
rotated in manual focus mode.
Options
ON
OFF
O Pressing the center of the rear command dial cancels focus zoom.
The Shooting Menus
INTERLOCK SPOT AE & FOCUS AREA
Select ON to meter the current focus frame when
SINGLE POINT is selected for AF MODE and SPOT is
selected for PHOTOMETRY.
Options
ON
OFF
143
INSTANT AF SETTING
Choose whether the camera focuses using single AF
(AF-S) or continuous AF (AF-C) when the AF-L button
is pressed in manual focus mode.
Options
AF-S
AF-C
6 DEPTH-OF-FIELD SCALE
The Shooting Menus
Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that
will be viewed as prints and the like, PIXEL BASIS to
help you assess depth of field for pictures that will
be viewed at high resolutions on computers or other
electronic displays.
Options
PIXEL BASIS
144
FILM FORMAT BASIS
AF/MF SETTING
RELEASE/FOCUS PRIORITY
Choose how the camera focuses in focus mode AF-S
or AF-C.
Option
RELEASE
FOCUS
Description
Shutter response is prioritized over focus. Pictures can
be taken when the camera is not in focus.
Focus is prioritized over shutter response. Pictures can
be only taken when the camera is in focus.
The Shooting Menus
145
TOUCH SCREEN MODE
Choose the shooting operations performed using
touch controls.
Still Photography
Mode
TOUCH SHOOTING
AF
Description
Tap your subject in the display to focus and release the shutter. In burst mode, pictures will be
taken while you keep your nger on the display.
The Shooting Menus
Tap to select a focus point. In focus mode S (AF-S),
focus will lock, while in focus mode C (AF-C), the
camera will continually adjust focus in response
to changes in the distance to the subject. Focus
lock and continuous focus can be ended by tapping the AF OFF icon.
AREA
Tap to select a point for focus or zoom. The focus
frame will move to the selected point.
OFF
Touch controls off. The display does not respond
when tapped.
146
AF/MF SETTING
Movie Recording
N We recommend that you select AREA for MOVIE AF
MODE in the shooting menu B (movie) tab before recording movies using touch controls (in some movie
modes, AREA will be selected automatically).
Mode
147
The Shooting Menus
Description
Tap your subject in the display to focus and start
recording. In focus mode C (AF-C), the camTOUCH SHOOTING era will continually adjust focus in response to
changes in the distance to the subject; to refocus in focus mode S (AF-S) or to focus on a new
subject in focus mode C, tap the subject in the
monitor. To end recording, press the shutter
button.
Tap your subject in the display to focus and press
the shutter button to start or end recording.
AF
In focus mode C (AF-C), the camera will
continually adjust focus in response to changes
in the distance to the subject; to refocus in focus
mode S (AF-S) or to focus on a new subject in
focus mode C, tap the subject in the monitor.
AF/MF SETTING
Mode
AREA
OFF
Description
Tap to select a focus point and press the shutter button to start or end recording. In focus
mode C (AF-C), the camera will continually
adjust focus in response to changes in the distance to the subject in the selected focus point.
In focus mode S (AF-S), you can move the focus
point by tapping the display, but can only refocus using the control to which AF-ON has been
assigned (P 227).
Touch controls off. The display does not respond
when tapped.
The Shooting Menus
N To disable touch controls and hide the touch screen mode
indicator, select OFF for D BUTTON/DIAL SETTING >
TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF.
148
A SHOOTING SETTING
Adjust shooting options.
To display shooting options, press
MENU/OK in the shooting display and
select the A (SHOOTING SETTING)
tab.
SHOOTING SETTING
SCENE POSITION
SELF-TIMER
INTERVAL TIMER SHOOTING
AE BKT SETTING
FILM SIMULATION BKT
PHOTOMETRY
SHUTTER TYPE
IS MODE
EXIT
N The options available vary with the shooting mode selected.
SCENE POSITION
Choose the mode selected when the drive dial is rotated to S and the auto mode selector lever is rotated
to AUTO.
N SPORT
O NIGHT
Description
The camera automatically optimizes settings to
suit the scene.
Choose for portraits.
Processes portraits to give the subject a smooth,
natural-looking complexion.
Choose for daylight shots of buildings and landscapes.
Choose when photographing moving subjects.
Choose for poorly lit twilight or night scenes.
149
The Shooting Menus
Mode
S ADVANCED
SR AUTO
h PORTRAIT
Z PORTRAIT
ENHANCER
M LANDSCAPE
Mode
H NIGHT
(TRIPOD)
p FIREWORKS
The Shooting Menus
Description
Choose this mode for slow shutter speeds when
shooting at night.
Slow shutter speeds are used to capture the expanding burst of light from a rework.
Q SUNSET
Choose this mode to record the vivid colors in
sunrises and sunsets.
R SNOW
Choose for crisp, clear shots that capture the
brightness of scenes dominated by shining
white snow.
s BEACH
Choose for crisp, clear shots that capture the
brightness of sunlit beaches.
f UNDERWATER Reduces the blue cast typically associated with
underwater lighting.
U PARTY
Capture indoor background lighting under lowlight conditions.
V FLOWER
Effective for taking more vivid shots of flowers.
W TEXT
Take clear pictures of text or drawings in print.
150
SHOOTING SETTING
SELF-TIMER
Choose a shutter release delay.
Option
Description
The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera
R 2 SEC
moving when the shutter button is pressed. The self-timer lamp blinks as the timer counts down.
The shutter is released ten seconds after the shutter button is pressed. Use for photographs in which you wish to
S 10 SEC
appear yourself. The self-timer lamp blinks immediately
before the picture is taken.
OFF Self-timer off.
O Stand behind the camera when using the shutter button. Standing in front of the lens can interfere with focus
and exposure.
The self-timer turns off automatically when the camera
is turned off.
151
The Shooting Menus
If an option other than OFF is se9
lected, the timer will start when
the shutter button is pressed all
the way down. The display in the
monitor shows the number of seconds remaining until the shutter is released. To stop
the timer before the picture is taken, press DISP/BACK.
INTERVAL TIMER SHOOTING
Configure the camera to take photos automatically
at a preset interval.
Highlight INTERVAL TIMER
SHOOTING in the A (SHOOTING
SETTING) tab and press MENU/OK.
Use the focus stick (focus lever) to choose the interval and
number of shots. Press MENU/OK
to proceed.
INTERVAL/NUMBER OF TIMES
INTERVAL
NUMBER OF TIMES
END
The Shooting Menus
Use the focus stick to choose
the starting time and then
press MENU/OK. Shooting will
start automatically.
152
CANCEL
START WAITING TIME
LATER
ESTIMATED START TIME 11 : 00 PM
START
CANCEL
CANCEL
SHOOTING SETTING
Interval timer photography cannot be used at a shutter
speed of B (bulb) or with multiple exposure photography. In burst mode, only one picture will be taken each
time the shutter is released.
N Use of a tripod is recommended.
Check the battery level before starting. We recommend
using an optional AC-9V AC power adapter and CP-W126
DC coupler.
The display sometimes turns off between shots and
lights a few seconds before the next shot is taken. The
display can be activated at any time by pressing the
shutter button.
153
The Shooting Menus
To continue shooting until the memory card is full, set
the number of shots to ∞.
AE BKT SETTING
Adjust exposure bracketing settings.
Option
Description
Choose the number of shots in the bracketing
FRAMES/
sequence (FRAMES) and the amount exposure is
STEP SETTING
varied with each shot (STEP).
Choose whether the shots in the bracketing se1 FRAME/
quence are taken one at a time (1 FRAME) or in
CONTINUOUS
a single burst (CONTINUOUS).
SEQUENCE SETTING Choose the order in which the shots are taken.
6 FILM SIMULATION BKT
The Shooting Menus
Choose the three film simulation types used for film
simulation bracketing (P 118).
Options
c PROVIA/STANDARD d Velvia/VIVID
i CLASSIC CHROME g PRO Neg. Hi
a ACROS *
b MONOCHROME *
e ASTIA/SOFT
h PRO Neg. Std
f SEPIA
* Available with yellow (Ye), red (R), and green (G) lters.
154
SHOOTING SETTING
PHOTOMETRY
Choose how the camera meters exposure.
O The selected option will only take effect when G AF/MF
SETTING > FACE/EYE DETECTION SETTING is FACE
OFF/EYE OFF.
Mode
Description
The camera instantly determines exposure based on an
o analysis of composition, color, and brightness distribu(multi)
tion. Recommended in most situations.
155
The Shooting Menus
p The camera meters the entire frame but assigns the
(centergreatest weight to the area at the center.
weighted)
The camera meters lighting conditions in an area at
the center of the frame equivalent to 2% of the total.
v Recommended with backlit subjects and in other cases
(spot)
in which the background is much brighter or darker than
the main subject.
Exposure is set to the average for the entire frame.
w Provides consistent exposure across multiple shots with
(average) the same lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white.
SHUTTER TYPE
Choose the shutter type. Choose the electronic shutter to mute the shutter sound.
Option
t MECHANICAL
SHUTTER
s ELECTRONIC
SHUTTER
t MECHANICAL +
s ELECTRONIC
Description
Take pictures with the mechanical shutter.
Take pictures with the electronic shutter.
The camera chooses the shutter type according
to shooting conditions.
If an option other than t MECHANICAL SHUTTER
is selected, shutter speeds faster than Âź000 s can be
chosen by rotating the shutter speed dial to 4000 and
6 then rotating the rear command dial.
The Shooting Menus
O Distortion may be visible in shots of moving subjects
with electronic shutter, while banding and fog may occur in shots taken under fluorescent lights or other flickering or erratic illumination. When taking pictures with
the shutter muted, respect your subjects’ image rights
and right to privacy.
N When the electronic shutter is used, the flash is disabled,
sensitivity is restricted to values of ISO 12800–200, and
long exposure noise reduction has no effect.
156
SHOOTING SETTING
IS MODE
Choose from the following image stabilization options:
N + MOTION has no effect when sensitivity is set to a fixed
value, and may also be unavailable at some other combinations of settings. The effect may vary with lighting
conditions and the speed at which the object is moving.
This option is available only with lenses that support image stabilization.
157
The Shooting Menus
Option
Description
L CONTINUOUS Image stabilization on. If + MOTION is se+ MOTION
lected, the camera will adjust shutter speed
to reduce motion blur when a moving obl CONTINUOUS
jects are detected.
As above, except that image stabilization is
M SHOOTING performed only when the shutter button is
+ MOTION
pressed halfway (focus mode C only) or the
shutter is released. If + MOTION is selected, the camera will adjust shutter speed to
m SHOOTING ONLY reduce motion blur when a moving objects
are detected.
Image stabilization off. Choose this option
OFF
when using a tripod.
ISO
Adjust the camera’s sensitivity to light.
Option
Description
Sensitivity is automatically adjusted in response
AUTO1
to shooting conditions. Choose the base sensiAUTO2
tivity, maximum sensitivity, and minimum shutter
AUTO3
speed for AUTO1, AUTO2, and AUTO3.
Adjust sensitivity manually. Selected value is
12800–200
shown in display.
Choose for special situations. Note that mottling
H (25600/51200),
may appear in pictures taken at H, while L reducL (100/125/160)
es dynamic range.
N Sensitivity is not reset when the camera is turned off.
The Shooting Menus
Sensitivity cannot be adjusted when the auto mode selector lever is rotated to AUTO.
When ON is selected for D BUTTON/DIAL SETTING >
ISO COMMAND DIAL SETTING, sensitivity can be adjusted by pressing the center of the front command to
select sensitivity and then rotating the dial to choose a
setting.
Adjusting Sensitivity
High values can be used to reduce blur when lighting is poor,
while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear
in pictures taken at high sensitivities.
158
SHOOTING SETTING
AUTO
Choose the base sensitivity, maximum sensitivity,
and minimum shutter speed for AUTO1, AUTO2, and
AUTO3. Defaults are shown below.
Item
Options
DEFAULT SENSITIVITY
12800–200
MAX. SENSITIVITY
12800–400
MIN. SHUTTER SPEED ⁄–¼ SEC, AUTO
Default
AUTO1 AUTO2 AUTO3
200
800
1600 3200
⁄ SEC
The Shooting Menus
The camera automatically chooses a sensitivity between the default and maximum values; sensitivity
is only raised above the default value if the shutter
speed required for optimal exposure would be slow- 6
er than the value selected for MIN. SHUTTER SPEED.
159
N If the value selected for DEFAULT SENSITIVITY is high-
er than that selected for MAX. SENSITIVITY, DEFAULT
SENSITIVITY will be set to the value selected for MAX.
SENSITIVITY.
The camera may select shutter speeds slower than MIN.
SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY. If
AUTO is selected for MIN. SHUTTER SPEED, the camera
will automatically choose a minimum shutter speed approximately equal to the inverse of the lens’ focal length,
in seconds (for example, if the lens has a focal length
of 50 mm, the camera will choose a minimum shutter
speed in the neighborhood of 1⁄50 s). The minimum shutter speed is not affected by the option selected for image stabilization.
The Shooting Menus
160
SHOOTING SETTING
MOUNT ADAPTOR SETTING
Adjust settings for M-mount lenses connected using
an optional FUJIFILM M MOUNT ADAPTER.
Choosing a Focal Length
If the lens has a focal length of 21,
24, 28, or 35 mm, choose a matching option in the MOUNT
ADAPTOR SETTING menu.
For other lenses, select LENS 5 or
LENS 6 and use the focus stick (focus lever) to enter the focal length.
LENS REGISTRATION
LENS 1
LENS 2
LENS 3
LENS 4
LENS 5
LENS 6
SET
LENS 5
INPUT FOCAL LENGTH
SET
CANCEL
The Shooting Menus
161
Distortion Correction
Choose from STRONG, MEDIUM, or
WEAK options to correct BARREL
or PINCUSHION distortion.
Color Shading Correction
Color (shading) variations between
the center and edges of the frame
can be adjusted separately for
each corner.
LENS5 DISTORTION CORRECTION
BARREL STRONG
BARREL MEDIUM
BARREL WEAK
OFF
PINCUSHION WEAK
PINCUSHION MEDIUM
PINCUSHION STRONG
NEXT
SET
To use color shading correction, follow the steps below.
The Shooting Menus
Rotate the rear command dial to choose a corner.
The selected corner is indicated by a triangle.
Use the focus stick (focus lever) to adjust shading
until there is no visible difference in color between
the selected corner and the center of the image.
Press the focus stick left or right to adjust colors
on the cyan–red axis. Press the focus stick up or
down to adjust colors on the blue–yellow axis.
N To determine the amount required, adjust color shading
correction while taking photos of blue sky or a sheet of
gray paper.
162
SHOOTING SETTING
Peripheral Illumination Correction
Choose from values between –5
and +5. Choosing positive values
increases peripheral illumination,
while choosing negative values
reduces peripheral illumination.
Positive values are recommended for vintage lenses,
negative values to create the effect of images taken
with an antique lens or a pinhole camera.
SET
CANCEL
N To determine the amount required, adjust peripheral il-
lumination correction while taking photos of blue sky or
a sheet of gray paper.
The Shooting Menus
WIRELESS COMMUNICATION
Connect to smartphones running the latest version
of the FUJIFILM Camera Remote app. The smartphone can be used to browse the images on the
camera, download selected images, control the camera remotely, or upload location data to the camera.
N For downloads and other information, visit:
http://app.fujifilm-dsc.com/en/camera_remote/
163
F FLASH SETTING
Adjust flash-related settings.
To display flash-related settings,
press MENU/OK in the shooting
display and select the F (FLASH
SETTING) tab.
FLASH SETTING
FLASH FUNCTION SETTING
RED EYE REMOVAL
TTL-LOCK MODE
LED LIGHT SETTING
MASTER SETTING
CH SETTING
EXIT
N The options available vary with the shooting mode selected.
6 FLASH FUNCTION SETTING
The Shooting Menus
Choose a flash control mode, flash
mode, or sync mode or adjust the
flash level. The options available
vary with the flash.
MODE
SUPPLIED FLASH
ADJUST
N See page 261 for more information.
164
END
FLASH SETTING
RED EYE REMOVAL
Remove red-eye effects caused by the flash.
Option
Description
A red-eye reduction pre-flash is combined with
FLASH + REMOVAL
digital red-eye removal.
FLASH
Flash red-eye reduction only.
REMOVAL
Digital red-eye removal only.
Flash red-eye reduction and digital red-eye reOFF
moval off.
N Flash red-eye reduction can be used in TTL flash control
mode. Digital red-eye removal is performed only when a
face is detected and is not available with RAW images.
The Shooting Menus
165
TTL-LOCK MODE
Instead of adjusting flash level with each shot, TTL
flash control can be locked for consistent results
across a series of photographs.
Option
Description
Flash output is locked at the value metered for
LOCK WITH LAST
the most recent photo. An error message will be
FLASH
displayed if no previously metered value exists.
LOCK WITH The camera emits a series of pre-flashes and
METERING FLASH locks flash output at the metered value.
N To use TTL lock, assign TTL-LOCK to a camera control
and then use the control to enable or disable TTL lock
(P 254).
The Shooting Menus
Flash compensation can be adjusted while TTL lock is in
effect.
166
FLASH SETTING
LED LIGHT SETTING
Choose whether to use the flash unit’s LED video
light (if available) as a catchlight or AF-assist illuminator when taking photos.
Option
CATCHLIGHT
AF ASSIST
AF ASSIST + CATCHLIGHT
OFF
Role of LED video light in still photography
Catchlight
AF-assist illuminator
AF-assist illuminator and catchlight
None
N This option can also be accessed via the flash settings
menu.
The Shooting Menus
MASTER SETTING
Choose a flash group (A, B, or C) for the flash mounted
on the camera hot shoe when it functions as a master flash controlling remote flash units via FUJIFILM
wireless optical flash control, or choose OFF to limit
master flash output to a level that does not affect the
final picture.
Options
Gr A
Gr B
Gr C
OFF
N This option can also be accessed via the flash settings
menu.
167
FLASH SETTING
CH SETTING
Choose the channel used for communication between the master flash and remote flash units
when using FUJIFILM optical wireless flash control.
Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity.
Options
CH1
The Shooting Menus
168
CH2
CH3
CH4
B MOVIE SETTING
Adjust movie-recording options.
To display options for movie recording, press MENU/OK in the
shooting display and select the B
(MOVIE SETTING) tab.
MOVIE SETTING
MOVIE MODE
MOVIE AF MODE
HDMI OUTPUT INFO DISPLAY
4K MOVIE OUTPUT
HDMI REC CONTROL
MIC LEVEL ADJUSTMENT
MIC/REMOTE RELEASE
EXIT
N The options available vary with the shooting mode selected.
MOVIE MODE
Choose a frame size and rate for movie recording.
Frame size
3840 × 2160
(4K)
1920 × 1080
(Full HD)
1280 × 720
(HD)
Rate
29.97 fps
25 fps
24 fps
23.98 fps
59.94 fps
50 fps
29.97 fps
25 fps
24 fps
23.98 fps
59.94 fps
50 fps
29.97 fps
25 fps
24 fps
23.98 fps
169
The Shooting Menus
Option
U 2160/29.97P
U 2160/25P
U 2160/24P
U 2160/23.98P
i 1080/59.94P
i 1080/50P
i 1080/29.97P
i 1080/25P
i 1080/24P
i 1080/23.98P
h 720/59.94P
h 720/50P
h 720/29.97P
h 720/25P
h 720/24P
h 720/23.98P
MOVIE AF MODE
Choose how the camera selects the focus point for
movie recording.
Option
Description
MULTI Automatic focus-point selection.
AREA The camera focuses on the subject in the selected focus area.
6 HDMI OUTPUT INFO DISPLAY
The Shooting Menus
If ON is selected, HDMI devices to which the camera
is connected will mirror the information in the camera display.
Options
ON
170
OFF
MOVIE SETTING
4K MOVIE OUTPUT
Choose the destination for 4K movies shot while the
camera is connected to an HDMI recorder or other
device that supports 4K.
Option
Description
4K movies are recorded to a camera memory card in 4K
b CARD
and output to the HDMI device in Full HD.
4K movies are output to the HDMI device in 4K, starting
HDMI when the shutter button is pressed. The camera does not
record 4K movies to a memory card.
The Shooting Menus
HDMI REC CONTROL
Choose whether the camera sends movie start and
stop signals to the HDMI device when the shutter
button is pressed to start and stop movie recording.
Options
ON
OFF
171
MOVIE SETTING
MIC LEVEL ADJUSTMENT
Adjust the recording level for the
built-in and external microphones.
MIC LEVEL ADJUSTMENT
SET
CANCEL
Option
Description
4—1 Choose a recording level.
N Displays shows the peak recording level detected in a
given period.
You can assign MIC LEVEL ADJUSTMENT to a camera
control and then using the control to adjust the microphone level during recording.
The Shooting Menus
MIC/REMOTE RELEASE
Specify whether the device connected to the microphone/remote release connector is a microphone or
a remote release.
Options
m MIC
172
n REMOTE
Playback and the
Playback Menu
173
The Playback Display
This section lists the indicators that may be displayed during playback.
Playback and the Playback Menu
O For illustrative purposes, displays are shown with all indicators lit.
12/31/2050 10:00 AM
174
The Playback Display
upload .........................................192
G Frame number ............................237
H Protected image .........................188
I Location data ............................. 243
J Red-eye removal indicator
..............................................165, 190
K Advanced lter .............................. 99
L Gift image....................................... 51
M Photobook assist indicator......194
N Battery level ................................... 43
O Image size/quality ............115, 116
P Film simulation ...........................118
Q Dynamic range ...........................121
R White balance .............................122
S Sensitivity......................................158
T Exposure compensation ............ 91
U Aperture .............................63, 69, 72
V Shutter speed....................63, 64, 72
W Playback mode indicator........... 51
X Movie icon ...................................... 58
Y Rating ............................................176
Z DPOF print indicator .................197
175
Playback and the Playback Menu
A Date and time ...................... 44, 204
B Face detection indicator...........139
C Bluetooth ON/OFF .....................241
D Image transfer order..................192
E Image transfer status ................192
F Number of frames selected for
The DISP/BACK Button
The DISP/BACK button controls the
display of indicators during playback.
Playback and the Playback Menu
Standard
Information off
12/31/2050 10:00 AM
3.2
+21/3
FAVORITES
Favorites
Info display
Favorites: Rating Pictures
To rate the current picture, press DISP/BACK and press the focus stick (focus lever) up and down to select from zero to five
stars.
176
The Playback Display
Viewing Photo Information
The photo information display changes each time the focus
stick (focus lever) is pressed up.
Basic data
Playback and the Playback Menu
12/31/2050 10:00 AM
3.2
S.S 1/2000
F 3.2
ISO 51200
+21/3
+21/3
NEXT
Info display 2
Info display 1
Zooming in on the Focus Point
Press the center of the rear command dial to zoom in on the
focus point. Press again to return to full-frame playback.
177
Viewing Pictures
Read this section for information on playback
zoom and multi-frame playback.
Playback and the Playback Menu
Use the rear command dial to go
from full-frame playback to playback zoom or multi-frame playback.
Full-frame playback
100-0001
Multi-frame
playback
Playback zoom
DISP/BACK
MENU/OK
Nineframe
view
Medium
zoom
HundredMaximum
frame
zoom
view
178
Viewing Pictures
N The maximum zoom ratio varies with the option select-
ed for H IMAGE QUALITY SETTING > IMAGE SIZE.
Playback zoom is not available with cropped or resized
copies saved at a size of a.
Scroll
When the picture is zoomed in, the focus stick (focus lever) can be used to
view areas of the image not currently
visible in the display.
Navigation window
Multi-Frame Playback
To change the number of images displayed, rotate
the rear command dial left when a picture is displayed full frame.
N Use the focus stick (focus lever) to highlight images and
press MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press the focus
stick up or down to view more pictures.
179
Playback and the Playback Menu
Playback Zoom
Rotate the rear command dial right to zoom in on the
current picture, left to zoom out. To exit zoom, press
DISP/BACK, MENU/OK, or the center of the rear command
dial.
C The Playback Menu
Adjust playback settings.
Playback and the Playback Menu
The playback menu is displayed
when you press MENU/OK in playback mode.
PLAY BACK MENU
RAW CONVERSION
ERASE
CROP
RESIZE
PROTECT
IMAGE ROTATE
RED EYE REMOVA
VOICE MEMO SETTING
EXIT
RAW CONVERSION
RAW pictures store information on camera settings
separately from the data captured by the camera
image sensor. Using C PLAY BACK MENU > RAW
CONVERSION, you can create JPEG copies of RAW
pictures using different options for the settings listed
on page 182. The original image data are unaffect7 ed, allowing a single RAW image to be processed in a
multitude of different ways.
With a RAW picture displayed, press MENU/OK to
display the playback menu.
180
The Playback Menu
In the playback menu, highlight RAW CONVERSION and
press MENU/OK to display settings.
RAW CONVERSION
REFLECT SHOOTING COND.
PUSH/PULL PROCESSING
DYNAMIC RANGE
FILM SIMULATION
GRAIN EFFECT
WHITE BALANCE
CREATE
CANCEL
Q button during playback.
Highlight a setting and press
the focus stick (focus lever)
right to display options. Press
WB
the focus stick up or down to
highlight the desired option
and press MENU/OK to select and return to the settings list. Repeat this step to adjust additional
settings.
RAW CONVERSION
撮影時条件を反映
100%
増感/減感
200%
ダイナミックレンジ
400%
フィルムシミュレーション
ホワイトバランス
シフト
Press the Q button to preview the JPEG copy and
press MENU/OK to save.
181
Playback and the Playback Menu
N These options can also be displayed by pressing the
The settings that can be adjusted when converting
pictures from RAW to JPEG are:
Playback and the Playback Menu
Setting
Description
REFLECT
Create a JPEG copy using the settings in effect at
SHOOTING COND. the time the photo was taken.
PUSH/PULL
Adjust exposure.
PROCESSING
Enhance details in highlights for natural conDYNAMIC RANGE
trast.
FILM SIMULATION Simulate the effects of different types of film.
GRAIN EFFECT
Add a film grain effect.
WHITE BALANCE Adjust white balance.
WB SHIFT
Fine-tune white balance.
HIGHLIGHT TONE Adjust highlights.
SHADOW TONE
Adjust shadows.
COLOR
Adjust color density.
SHARPNESS
Sharpen or soften outlines.
NOISE REDUCTION Process the copy to reduce mottling.
LENS
Improve definition by adjusting for diffraction
MODULATION
and the slight loss of focus at the periphery of
OPTIMIZER
the lens.
Choose the color space used for color reproducCOLOR SPACE
tion.
182
The Playback Menu
ERASE
Delete individual pictures, multiple selected pictures,
or all pictures.
Protect important
pictures or copy them to a computer or other storage
device before proceeding.
Option
Description
FRAME
Delete pictures one at a time.
SELECTED FRAMES Delete multiple selected pictures.
ALL FRAMES Delete all unprotected pictures.
FRAME
1 Select FRAME for ERASE in the playback menu.
Playback and the Playback Menu
O Deleted pictures cannot be recovered.
Press the focus stick (focus lever) left or right
to scroll through pictures and press MENU/OK to
delete (a confirmation dialog is not displayed).
Repeat to delete additional pictures.
183
SELECTED FRAMES
1 Select SELECTED FRAMES for ERASE in the playback menu.
Playback and the Playback Menu
Highlight pictures and press MENU/OK to select
or deselect (pictures in photobooks or printer
orders are shown by S). Selected pictures are
indicated by check marks (R).
When the operation is complete, press DISP/BACK
to display a confirmation dialog.
Highlight OK and press MENU/OK to delete the selected pictures.
184
The Playback Menu
ALL FRAMES
1 Select ALL FRAMES for ERASE in the playback
menu.
A confirmation dialog will be displayed; highlight
OK and press MENU/OK to delete all unprotected
pictures.
N Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed cannot be
recovered.
If a message appears stating that the selected images
are part of a DPOF print order, press MENU/OK to delete
the pictures.
Playback and the Playback Menu
185
CROP
Create a cropped copy of the current picture.
Playback and the Playback Menu
Display the desired picture.
Press MENU/OK to display a confirmation dialog.
Select CROP in the playback menu.
Use the rear command dial to zoom in and out
and press the focus stick (focus lever) up, down,
left, or right to scroll the picture until the desired
portion is displayed.
Press MENU/OK again to save the cropped copy to
a separate file.
N Larger crops produce larger copies; all copies have an
aspect ratio of 3∜2. If the size of the final copy will be a,
YES will be displayed in yellow.
186
The Playback Menu
RESIZE
Create a small copy of the current picture.
Display the desired picture.
Select RESIZE in the playback menu.
Highlight a size and press MENU/OK to display a
confirmation dialog.
Press MENU/OK again to save the resized copy to a
separate file.
N The sizes available vary with the size of the original image.
Playback and the Playback Menu
187
Playback and the Playback Menu
PROTECT
Protect pictures from accidental deletion. Highlight
one of the following options and press MENU/OK.
• FRAME: Protect selected pictures. Press the focus
stick (focus lever) left or right to view pictures and
press MENU/OK to select or deselect. Press DISP/BACK
when the operation is complete.
• SET ALL: Protect all pictures.
• RESET ALL: Remove protection from all pictures.
O Protected pictures will be deleted when the memory
card is formatted.
N Protecting
images currently selected for upload to
paired smartphones or tablets removes upload marking.
188
The Playback Menu
IMAGE ROTATE
Rotate pictures.
Display the desired picture.
Press MENU/OK. The picture will automatically be
displayed in the selected orientation whenever it
is played back on the camera.
Select IMAGE ROTATE in the playback menu.
Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90°
counterclockwise.
N Protected pictures cannot be rotated. Remove protection before rotating pictures.
The camera may not be able to rotate pictures created
with other devices. Pictures rotated on the camera will
not be rotated when viewed on a computer or on other
cameras.
Pictures taken with D SCREEN SET-UP > AUTOROTATE PB
are automatically displayed in the correct orientation during
playback.
189
Playback and the Playback Menu
RED EYE REMOVAL
Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will
be processed to create a copy with reduced red-eye.
Playback and the Playback Menu
Display the desired picture.
Select RED EYE REMOVAL in the playback menu.
Press MENU/OK.
N Results vary depending on the scene and the camera’s
success in detecting faces. Red eye cannot be removed
from pictures that have already been processed using red-eye removal, which are indicated by a e icon
during playback.
The amount of time needed to process the image varies
with the number of faces detected.
Red eye removal cannot be performed on RAW images.
190
The Playback Menu
VOICE MEMO SETTING
Add a voice memo to the current photograph.
Select ON for VOICE MEMO SETTING in the playback menu.
Display a photo to which you wish to add a voice
memo.
Press and hold the center of the front command
dial to record the memo. Recording ends after
30 s or when you release the dial.
N The new memo will be recorded over any existing memos. Deleting the picture also deletes the memo.
Voice memos cannot be added to movies or protected
pictures.
Playing Voice Memos
Pictures with voice memos are indicated by q icons during
playback. To play a memo, select the picture and press the
center of the front command dial; a progress bar will be displayed while the memo plays back. Volume can be adjusted
by pressing MENU/OK to pause playback and then pressing
the focus stick (focus lever) up or down to adjust the volume.
Press MENU/OK again to resume playback. Volume can also be
adjusted using D SOUND SET-UP > PLAYBACK VOLUME.
191
Playback and the Playback Menu
IMAGE TRANSFER ORDER
Select photos for upload to a paired smartphone or
tablet.
Playback and the Playback Menu
Select IMAGE TRANSFER ORDER in the playback
menu.
Highlight photos and press MENU/OK to select or
deselect. Repeat until all the desired photos have
been selected.
Press MENU/OK to exit to playback.
N If ON is selected for D CONNECTION SETTING >
Bluetooth SETTINGS > AUTO IMAGE TRANSFER,
upload will begin shortly after you exit to playback
or turn the camera off.
N Image transfer orders can contain a maximum of 999
pictures.
Protected pictures, RAW images, “gift” pictures, and movies cannot be selected for upload.
You can also mark images for upload by pressing the AF-L
button.
192
The Playback Menu
N For downloads and other information, visit:
http://app.fujifilm-dsc.com/en/camera_remote/
Playback and the Playback Menu
WIRELESS COMMUNICATION
Connect to smartphones running the latest version
of the FUJIFILM Camera Remote app. The smartphone can be used to browse the images on the
camera, download selected images, control the camera remotely, or upload location data to the camera.
SLIDE SHOW
View pictures in an automated slide show. Press 7
MENU/OK to start and press the focus stick (focus lever)
right or left to skip ahead or back. Press DISP/BACK at
any time during the show to view on-screen help. The
show can be ended at any time by pressing MENU/OK.
N The camera will not turn off automatically while a slide
show is in progress.
193
PHOTOBOOK ASSIST
Create books from your favorite photos.
Playback and the Playback Menu
Creating a Photobook
1 Select NEW BOOK for C PLAY BACK MENU >
PHOTOBOOK ASSIST.
Scroll through the images and press the focus
stick (focus lever) up to select or deselect. Press
MENU/OK to exit when the book is complete.
N Neither photographs a or smaller nor movies can
be selected for photobooks.
The first picture selected becomes the cover image.
Press the focus stick down to select the current image for the cover instead.
Highlight COMPLETE PHOTOBOOK and press
MENU/OK (to select all photos for the book, choose
SELECT ALL). The new book will be added to the
list in the photobook assist menu.
N Books can contain up to 300 pictures. Books that contain
no photos are automatically deleted.
Photobooks
Photobooks can be copied to a computer using MyFinePix
Studio software.
194
The Playback Menu
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be displayed; select the desired
option and follow the on-screen instructions.
• EDIT: Edit the book as described in “Creating a
Photobook”.
• ERASE: Delete the book.
Playback and the Playback Menu
Viewing Photobooks
Highlight a book in the photobook assist menu and
press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through
the pictures.
195
Playback and the Playback Menu
PC AUTO SAVE
Upload pictures from the camera to a computer
running the latest version of FUJIFILM PC AutoSave
(note that you must first install the software and configure the computer as a destination for images copied from the camera).
N For downloads and other information, visit:
http://app.fujifilm-dsc.com/en/pc_autosave/
196
The Playback Menu
PRINT ORDER (DPOF)
Create a digital “print order” for DPOF-compatible
printers.
Select C PLAY BACK MENU > PRINT ORDER
(DPOF).
Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures
without dates, or RESET ALL to remove all pictures from the print order before proceeding.
Display a picture you wish to include in or remove from the print order.
Press the focus stick (focus lever) up or down to choose the
number of copies (up to 99). To
remove a picture from the order, press the focus stick down
until the number of copies is 0.
PRINT ORDER (DPOF)
DPOF: 00001
Playback and the Playback Menu
01 SHEETS
FRAME
SET
Total number
of prints
Number of copies
Repeat steps 3–4 to complete the print order.
The total number of prints is displayed in the
monitor. Press MENU/OK to exit.
197
N The pictures in the current print order are indicated by a
u icon during playback.
Print orders can contain a maximum of 999 pictures.
Playback and the Playback Menu
If a memory card is inserted containing a print order
created by another camera, you will need to delete the
order before creating as described above.
198
The Playback Menu
Turn the printer on.
Select C PLAY BACK MENU >
instax PRINTER PRINT. The
camera will connect to the
printer.
PRINTER PRINT
instax-12345678
CONNECTING TO PRINTER
FUJIFILM-CAMERA-1234
CANCEL
N To print a frame from a burst sequence, display the
frame before selecting instax PRINTER PRINT.
Use the focus stick (focus lever)
to display the picture you want
to print, then press MENU/OK.
The picture will be sent to the
printer and printing will start.
PRINTER PRINT
100-0020
TRANSMIT
instax-12345678
Playback and the Playback Menu
instax PRINTER PRINT
To print pictures to optional FUJIFILM instax SHARE
printers, first select D CONNECTION SETTING >
instax PRINTER CONNECTION SETTING and enter
the instax SHARE printer name (SSID) and password,
then follow the steps below.
CANCEL
N Pictures taken with other cameras cannot be printed.
The area printed is smaller than the area visible in
the LCD monitor.
199
The Playback Menu
Playback and the Playback Menu
DISP ASPECT
Choose how High Definition (HD) devices display pictures with an aspect ratio of 3∜2 (this option is available only when an HDMI cable is connected). Select
16∜9 to display the image so that it fills the screen
with its top and bottom cropped out, 3∜2 to display
the entire image with black bands at either side.
16∜∜9
16
Display
200
Option
3∜2
The Setup Menus
201
D USER SETTING
Adjust basic camera settings.
To access basic camera settings,
press MENU/OK, select the D (SET UP)
tab, and choose USER SETTING.
USER SETTING
FORMAT
DATE/TIME
TIME DIFFERENCE
MY MENU SETTING
SENSOR CLEANING
RESET
The Setup Menus
202
USER SETTING
FORMAT
To format a memory card:
Select D USER SETTING > FORMAT in the D (SET
UP) tab.
A confirmation dialog will be
displayed. To format the memory card, highlight OK and press
MENU/OK. To exit without formatting the memory card, select
CANCEL or press DISP/BACK.
FORMAT
FORMAT OK?
ERASE ALL DATA
OK
CANCEL
ed from the memory card. Be sure important files have
been copied to a computer or other storage device.
Do not open the battery-chamber cover during formatting.
N The format menu can also be displayed by pressing the
center of the rear command dial while pressing and
holding the b button.
203
The Setup Menus
O All data—including protected pictures—will be delet-
DATE/TIME
To set the camera clock:
The Setup Menus
Select D USER SETTING > DATE/TIME in the
D (SET UP) tab.
Press the focus stick (focus lever) left or right to
highlight the year, month, day, hour, or minute
and press up or down to change. To change the
order in which the year, month, and day are displayed, highlight the date format and press the
focus stick up or down.
Press MENU/OK to set the clock.
204
USER SETTING
TIME DIFFERENCE
Switch the camera clock instantly from your home
time zone to the local time at your destination when
traveling. To specify the difference between your local and home time zone:
Highlight g LOCAL and press MENU/OK.
To set the camera clock to local time, highlight
g LOCAL and press MENU/OK. To set the clock to the
time in your home time zone, select h HOME. If
g LOCAL is selected, g will be displayed in yellow
for about three seconds when the camera is turned on.
Options
g LOCAL
h HOME
205
The Setup Menus
Use the focus stick (focus lever) to choose the
time difference between local time and your
home time zone. Press MENU/OK when settings are
complete.
a
Choose a language.
The Setup Menus
MY MENU SETTING
Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used options.
Highlight D USER SETTING > MY
MENU SETTING in the D (SET
UP) tab and press MENU/OK to display the options at right.
206
MY MENU SETTING
ADD ITEMS
RANK ITEMS
REMOVE ITEMS
USER SETTING
Press the focus stick (focus lever) up or down to highlight
ADD ITEMS and press MENU/OK.
Options that can be added to
“my menu” are highlighted in
blue.
MY MENU SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
GRAIN EFFECT
DYNAMIC RANGE
WHITE BALANCE
HIGHLIGHT TONE
SELECT
CANCEL
N Items currently in “my menu” are indicated by check
marks.
Highlight an item and press
MENU/OK to add it to “my menu”.
MY MENU SETTING
1 IMAGE SIZE
SAVE
Press MENU/OK to return to the edit display.
Repeat Steps 3 and 4 until all the desired items
have been added.
N “My menu” can contain up to 16 items.
Editing “My Menu”
To reorder or delete items, select RANK ITEMS or REMOVE
ITEMS in Step 1.
207
The Setup Menus
MOVE
SENSOR CLEANING
Remove dust from the camera image sensor.
• OK: Clean the sensor immediately.
• WHEN SWITCHED ON: Sensor cleaning will be performed
when the camera is turned on.
• WHEN SWITCHED OFF: Sensor cleaning will be performed when the camera turns off (sensor cleaning
is not however performed if the camera turns off in
playback mode).
The Setup Menus
N Dust that cannot be removed using sensor cleaning can
be removed manually.
208
USER SETTING
RESET
Reset shooting or setup menu options to default
values. Custom white balance, custom settings
banks created using EDIT/SAVE CUSTOM SETTING,
WIRELESS SETTINGS, and the setup menu DATE/
TIME and TIME DIFFERENCE options are not affected.
Highlight the desired option and press MENU/OK.
A confirmation dialog will be displayed; highlight
OK and press MENU/OK.
The Setup Menus
209
D SOUND SETTING
Make changes to camera sounds.
To access sound settings, press
MENU/OK, select the D (SET UP) tab,
and choose SOUND SET-UP.
SOUND SETTING
AF BEEP VOL.
SELF-TIMER BEEP VOL.
OPERATION VOL.
SHUTTER VOLUME
SHUTTER SOUND
PLAYBACK VOLUME
The Setup Menus
AF BEEP VOL.
Choose the volume of the beep that sounds when
the camera focuses. The beep can be muted by se8 lecting eOFF.
b (high)
210
Options
c (medium)
d (low)
eOFF (mute)
SOUND SETTING
SELF-TIMER BEEP VOL.
Choose the volume of the beep that sounds while
the self-timer is active. The beep can be muted by
selecting eOFF.
b (high)
Options
c (medium)
d (low)
eOFF (mute)
The Setup Menus
OPERATION VOL.
Adjust the volume of the sounds produced when
camera controls are operated. Choose eOFF to dis8
able control sounds.
b (high)
Options
c (medium)
d (low)
eOFF (mute)
211
SHUTTER VOLUME
Adjust the volume of the sounds produced by the
electronic shutter. Choose eOFF to disable the shutter sound.
b (high)
The Setup Menus
Options
c (medium)
d (low)
eOFF (mute)
SHUTTER SOUND
Choose the sound made by the electronic shutter.
i SOUND 1
212
Options
j SOUND 2
k SOUND 3
SOUND SETTING
PLAYBACK VOLUME
Adjust the volume for movie playback. Choose from
10 options between 10 (high) and 1 (low) or select 0
to mute audio during movie playback.
10
Options
The Setup Menus
213
D SCREEN SETTING
Make changes to display settings.
To access display settings, press
MENU/OK, select the D (SET UP) tab,
and choose SCREEN SET-UP.
SCREEN SETTING
EVF BRIGHTNESS
EVF COLOR
LCD BRIGHTNESS
LCD COLOR
IMAGE DISP.
AUTOROTATE DISPLAYS
PREVIEW EXP./WB IN MANUAL MODE
PREVIEW PIC. EFFECT
The Setup Menus
EVF BRIGHTNESS
Adjust the brightness of the display in the electronic
viewfinder. Select MANUAL to choose from 13 op8 tions from +5 (bright) to −7 (dark), or select AUTO for
automatic brightness adjustment.
Options
MANUAL
214
AUTO
SCREEN SETTING
EVF COLOR
Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5.
+5
+4
+3
+2
+1
Options
0 −1
−2
−3
−4
−5
+5
+4
+3
+2
Options
+1 0 −1
−2
−3
−4
−5
215
The Setup Menus
LCD BRIGHTNESS
Adjust monitor brightness. Choose from 11 options
between +5 and −5.
LCD COLOR
Adjust monitor hue. Choose from 11 options between +5 and −5.
+5
+4
+3
+2
+1
Options
0 −1
−2
−3
−4
−5
The Setup Menus
IMAGE DISP.
Choose how long images are displayed after shooting.
Colors may differ slightly from those in the final image
and
“noise” mottling may be visible at high sensitivities.
Option
Description
Pictures are displayed until the MENU/OK button is
pressed or the shutter button is pressed halfway. To
CONTINUOUS
zoom in on the active focus point, press the center of
the rear command dial; press again to cancel zoom.
1.5 SEC Pictures are displayed for the selected time or until the
0.5 SEC shutter button is pressed halfway.
OFF
Pictures are not displayed after shooting.
216
SCREEN SETTING
AUTOROTATE DISPLAYS
Choose whether the indicators in the viewfinder and
LCD monitor rotate to match camera orientation.
Options
ON
OFF
The Setup Menus
PREVIEW EXP./WB IN MANUAL MODE
Select PREVIEW EXP./WB to enable exposure and
white balance preview in manual exposure mode,
or choose PREVIEW WB to preview only white bal- 8
ance (PREVIEW WB is recommended in situations in
which exposure and white balance are likely to change
during shooting, as may be the case when you use a
flash with an incandescent monitoring lamp). Select
OFF when using a flash or on other occasions on which
exposure may change when the picture is taken.
PREVIEW EXP./WB
Options
PREVIEW WB
OFF
217
PREVIEW PIC. EFFECT
Choose ON to preview the effects of film simulation,
white balance, and other settings in the monitor, OFF
to make shadows in low-contrast, back-lit scenes and
other hard-to-see subjects more visible.
Options
ON
OFF
N If OFF is selected, the effects of camera settings will not
The Setup Menus
be visible in the monitor and colors and tone will differ
from those in the final picture. The display will however
be adjusted to show the effects of advanced filters and
of monochrome and sepia settings.
218
SCREEN SETTING
FRAMING GUIDELINE
Choose a framing grid for shooting mode.
Option
G GRID 24
F GRID 9
Display
For “rule of thirds”
composition.
H HD FRAMING
A six-by-four grid.
N Framing guides are not shown at default settings but can
be displayed using D SCREEN SET-UP > DISP. CUSTOM
SETTING (P 221).
The Setup Menus
Frame HD pictures in
the crop shown by the
lines at the top and
bottom of the display.
219
AUTOROTATE PB
Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
Options
ON
The Setup Menus
OFF
FOCUS SCALE UNITS
Choose the units used for the focus distance indicator.
Options
METERS
220
FEET
SCREEN SETTING
DISP. CUSTOM SETTING
Choose the items shown in the standard display.
In shooting mode, use the DISP/BACK button to
display standard indicators.
Press MENU/OK and select D SCREEN SET-UP >
DISP. CUSTOM SETTING in the D (SET UP) tab.
Highlight items and press MENU/OK to select or
deselect.
Item
SHUTTER TYPE
FLASH
CONTINUOUS MODE
DUAL IS MODE
TOUCH SCREEN MODE
WHITE BALANCE
FILM SIMULATION
DYNAMIC RANGE
FRAMES REMAINING
IMAGE SIZE/QUALITY
MOVIE MODE & REC. TIME
IMAGE TRANSFER ORDER
BATTERY LEVEL
FRAMING OUTLINE
Default
221
The Setup Menus
Item
Default
FRAMING GUIDELINE
ELECTRONIC LEVEL
FOCUS FRAME
AF DISTANCE INDICATOR
MF DISTANCE INDICATOR
HISTOGRAM
LIVE VIEW HIGHLIGHT ALERT w
SHOOTING MODE
APERTURE/S-SPEED/ISO
INFORMATION BACKGROUND R
Expo. Comp. (Digit)
Expo. Comp. (Scale)
FOCUS MODE
PHOTOMETRY
SCREEN SETTING
Press DISP/BACK to save changes.
Press DISP/BACK as needed to exit the menus and
return to the shooting display.
N Some indicators are not displayed in all modes.
The Setup Menus
222
D BUTTON/DIAL SETTING
Access options for camera controls.
To access control options, press
MENU/OK, select the D (SET UP)
tab, and choose BUTTON/DIAL
SETTING.
BUTTON/DIAL SETTING
FOCUS LEVER SETTING
EDIT/SAVE QUICK MENU
FUNCTION (Fn) SETTING
COMMAND DIAL SETTING
S.S. OPERATION
ISO COMMAND DIAL SETTING
SHUTTER AF
SHUTTER AE
Option
Description
LOCK (OFF) The focus stick cannot be used during shooting.
PUSH n TO Press the stick to view the focus-point display and tilt
UNLOCK the stick to select a focus point.
Tilt the stick to view the focus-point display and select
ON
a focus point.
223
The Setup Menus
FOCUS LEVER SETTING
Choose the functions performed by the focus stick
(focus lever).
EDIT/SAVE QUICK MENU
Choose the items displayed in the quick menu.
The Setup Menus
Select D BUTTON/DIAL SETTING > EDIT/SAVE
QUICK MENU in the D (SET UP) tab.
The current quick menu will be displayed; use
the focus stick (focus lever) to highlight the item
you wish to change and press MENU/OK.
Highlight any of the following options and press
MENU/OK to assign it to the selected position.
• IMAGE SIZE
• IMAGE QUALITY
• FILM SIMULATION
• GRAIN EFFECT
• DYNAMIC RANGE
• WHITE BALANCE
• HIGHLIGHT TONE
• SHADOW TONE
• COLOR
• SHARPNESS
• NOISE REDUCTION
• SELECT CUSTOM SETTING
• AF MODE
• AF-C CUSTOM SETTINGS
* Stored in custom settings bank.
224
• FACE/EYE DETECTION SETTING
• MF ASSIST
• TOUCH SCREEN MODE
• SELF-TIMER
• PHOTOMETRY
• SHUTTER TYPE
• ISO
• FLASH FUNCTION SETTING
• FLASH COMPENSATION
• MOVIE MODE
• MIC LEVEL ADJUSTMENT
• EVF/LCD BRIGHTNESS
• EVF/LCD COLOR
• NONE
BUTTON/DIAL SETTING
Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is
selected, current settings are shown in the quick
menu by the label BASE.
Highlight the desired item and press MENU/OK to
assign it to the selected position.
N The quick menu can also be accessed in shooting mode
by holding the Q button.
The Setup Menus
225
FUNCTION (Fn) SETTING
Choose the roles played by the function buttons.
The Setup Menus
Select D BUTTON/DIAL SETTING > FUNCTION
(Fn) SETTING in the D (SET UP) tab.
Highlight the desired control and press MENU/OK.
Highlight any of the following options and press
MENU/OK to assign it to the selected control.
• IMAGE SIZE
• IMAGE QUALITY
• RAW
• FILM SIMULATION
• GRAIN EFFECT
• DYNAMIC RANGE
• WHITE BALANCE
• SELECT CUSTOM SETTING
• FOCUS AREA
• FOCUS CHECK
• AF MODE
• AF-C CUSTOM SETTINGS
• FACE/EYE DETECTION SETTING
• SELF-TIMER
• AE BKT SETTING
• PHOTOMETRY
• SHUTTER TYPE
• ISO
226
• WIRELESS COMMUNICATION
• FLASH FUNCTION SETTING
• TTL-LOCK
• MODELING FLASH
• MIC LEVEL ADJUSTMENT
• PREVIEW DEPTH OF FIELD
• PREVIEW EXP./WB IN MANUAL MODE
• PREVIEW PIC. EFFECT
• HISTOGRAM
• AE LOCK ONLY
• AF LOCK ONLY
• AE/AF LOCK
• AF-ON
• APERTURE SETTING
• AUTO IMAGE TRANSFER
• Bluetooth ON/OFF
• PLAYBACK
• NONE (control disabled)
BUTTON/DIAL SETTING
Function button assignment options can also be accessed by holding the DISP/BACK button.
AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and
AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4).
AF-ON
If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway.
The Setup Menus
MODELING FLASH
If MODELING FLASH is selected when a compatible
shoe-mounted flash unit is attached, you can press
the control to test-fire the flash and check for shadows and the like (modeling flash).
TTL-LOCK
If TTL-LOCK is selected, you can press the control to
lock flash output according to the option selected for
F FLASH SETTING > TTL-LOCK MODE (P 166).
227
COMMAND DIAL SETTING
Choose the roles played by the command dials.
Option
Description
The front command dial controls aperture, the rear
Y F X S.S.
command dial shutter speed.
The front command dial controls shutter speed, the
Y S.S. X F
rear command dial aperture.
The Setup Menus
o S.S. OPERATION
Select OFF to disable shutter-speed fine-tuning using the command dials.
Options
ON
228
OFF
BUTTON/DIAL SETTING
ISO COMMAND DIAL SETTING
Select ON to allow sensitivity to be adjusted using
the front command dial.
Options
ON
OFF
N The sensitivity selected with the command dial is reflected
in the setting chosen for A SHOOTING SETTING > ISO.
Option
AF-S
AF-C
Description
• ON: Focus locks when the shutter button is pressed
halfway.
• OFF: No focus operation is performed when the
shutter button is pressed halfway.
• ON: The camera focuses while the shutter button is
pressed halfway.
• OFF: No focus operation is performed when the
shutter button is pressed halfway.
229
The Setup Menus
SHUTTER AF
Choose whether the camera focuses when the shutter button is pressed halfway.
SHUTTER AE
If ON is selected, exposure will lock while the shutter
button is pressed halfway.
Option
Description
Exposure locks when the shutter button is
pressed halfway.
• OFF: Exposure does not lock when the shutter button is pressed halfway.
• ON: Exposure locks while the shutter button is
pressed halfway.
• OFF: Exposure does not lock when the shutter button is pressed halfway.
• ON:
AF-S/MF
AF-C
The Setup Menus
N Select OFF to allow the camera to adjust exposure before each shot taken in burst mode.
8 SHOOT WITHOUT LENS
Choose ON to enable the shutter release when no
lens is attached.
Options
ON
230
OFF
BUTTON/DIAL SETTING
SHOOT WITHOUT CARD
Choose whether the shutter can be released without
a memory card inserted in the camera.
Option
ON
OFF
Description
When no memory card is inserted, the shutter can be
released to test camera function and the shooting and
setup menus can be displayed.
The shutter is disabled if no memory card is inserted,
preventing accidental loss of pictures taken without a
memory card.
Options
X CW (clockwise)
Y CCW (counterclockwise)
231
The Setup Menus
FOCUS RING
Choose the direction in which the focus ring is rotated to increase the focus distance.
AE/AF-LOCK MODE
If AE & AF ON WHEN PRESSING is selected, exposure
and/or focus will lock while the AE-L or AF-L button
is pressed. If AE & AF ON/OFF SWITCH is selected,
exposure and/or focus will lock when the AE-L or AF-L
button is pressed and remain locked until the button
is pressed again.
Options
AE & AF ON WHEN PRESSING
The Setup Menus
AE & AF ON/OFF SWITCH
APERTURE SETTING
Choose the method used to adjust aperture when
using lenses with no aperture rings.
Option
Description
AUTO + Rotate the front command dial to choose the aperture.
o MANUAL Rotate past minimum aperture to choose A (auto).
Aperture is selected automatically; camera functions
AUTO
in exposure mode P (program AE) or S (shutter-priority AE).
Rotate the front command dial to choose the aperMANUAL ture; camera functions in exposure mode A (aperture-priority AE) or M (manual).
232
BUTTON/DIAL SETTING
TOUCH SCREEN SETTING
Enable or disable touch-screen controls.
Option
Description
• ON: Touch controls enabled; the LCD monitor
The Setup Menus
TOUCH SCREEN functions as a touch screen.
ON/OFF
• OFF: Touch controls disabled; the LCD monitor
cannot be used as a touch screen.
Select the area of the LCD monitor (ALL, RIGHT, or
EVF TOUCH
LEFT) used for touch controls while the viewnder
SCREEN AREA
is active, or choose OFF to disable touch controls
SETTINGS
while the viewnder is in use.
233
D POWER MANAGEMENT
Adjust power management settings.
To access power management settings, press MENU/OK, select the D
(SET UP) tab, and choose POWER
MANAGEMENT.
POWER MANAGEMENT
AUTO POWER OFF
PERFORMANCE
The Setup Menus
AUTO POWER OFF
Choose the length of time before the camera turns
off automatically when no operations are performed.
8 Shorter times increase battery life; if OFF is selected,
the camera must be turned off manually.
5 MIN
234
2 MIN
Options
1 MIN
30 SEC
15 SEC
OFF
POWER MANAGEMENT
PERFORMANCE
Adjust power management settings.
Option
HIGH
PERFORMANCE
STANDARD
AF performance LCD/EVF display
(speed)
quality
Battery
endurance
Fast
Very high
Low
Normal
High
Normal
N When STANDARD is selected, the frame rate will drop
when no operations are being performed. Operating
camera controls returns the frame rate to normal.
The Setup Menus
235
D SAVE DATA SETTING
Make changes to file management settings.
To access file management settings, press MENU/OK, select the
D (SET UP) tab, and choose SAVE
DATA SET-UP.
The Setup Menus
236
SAVE DATA SETTING
FRAME NO.
SAVE ORG IMAGE
EDIT FILE NAME
COPYRIGHT INFO
SAVE DATA SETTING
FRAME NO.
Frame number
New pictures are stored in image
files named using a four-digit file
number assigned by adding one
File
to the last file number used. The Directory
number
number
file number is displayed during
playback as shown. FRAME NO. controls whether file
numbering is reset to 0001 when a new memory card
is inserted or the current memory card is formatted.
Option
N If the frame number reaches 999-9999, the shutter re-
lease will be disabled. Format the memory card after
transferring to a computer any pictures you wish to keep.
Selecting D USER SETTING > RESET sets FRAME NO.
to CONTINUOUS but does not reset the file number.
Frame numbers for pictures taken with other cameras
may differ.
237
The Setup Menus
Description
Numbering continues from the last le number used
or the rst available le number, whichever is higher.
CONTINUOUS
Choose this option to reduce the number of pictures
with duplicate le names.
Numbering is reset to 0001 after formatting or when
RENEW
a new memory card is inserted.
SAVE ORG IMAGE
Choose ON to save unprocessed copies of pictures
taken using RED EYE REMOVAL.
Options
ON
OFF
The Setup Menus
EDIT FILE NAME
Change the file name prefix. sRGB images use a
four-letter prefix (default “DSCF”), Adobe RGB images
8 a three-letter prefix (“DSF”) preceded by an underscore.
Option
sRGB
AdobeRGB
238
Default prefix
DSCF
_DSF
Sample file name
ABCD0001
_ABC0001
SAVE DATA SETTING
COPYRIGHT INFO
Copyright information, in the form of Exif tags, can
be added to new images as they are taken. Changes
to copyright information are reflected only in images
taken after the changes are made.
The Setup Menus
Option
Description
DISP COPYRIGHT
View the current copyright information.
INFO
ENTER AUTHOR'S
Enter the creator’s name.
INFO
ENTER COPYRIGHT
Enter the name of the copyright holder.
INFO
Delete the current copyright information. This
DELETE COPYRIGHT change applies only to images taken after this
option is selected; copyright information reINFO
corded with existing images is not affected.
239
D CONNECTION SETTING
Adjust settings for connection to other devices.
To access connection settings, press
MENU/OK, select the D (SET UP)
tab, and choose CONNECTION
SETTING.
CONNECTION SETTING
Bluetooth SETTINGS
PC AUTO SAVE SETTINGS
PRINTER CONNECTION SETTING
GENERAL SETTINGS
INFORMATION
RESET WIRELESS SETTING
N For more information on wireless connections, visit:
http://fujifilm-dsc.com/wifi/
The Setup Menus
240
CONNECTION SETTING
Bluetooth SETTINGS
Adjust Bluetooth settings.
Option
N Install the latest version of the FUJIFILM Camera Remote
app on your smartphone or tablet before pairing the device with your camera or uploading images.
When ON is selected for both Bluetooth ON/OFF and
AUTO IMAGE TRANSFER, upload to paired devices will begin shortly after you exit to playback or turn the camera off.
241
The Setup Menus
Description
To pair the camera with a smartphone or tablet, select
PAIRING
this option, then launch FUJIFILM Camera Remote on
REGISTRATION
the smart device and tap PAIRING REGISTRATION.
DELETE
End pairing.
PAIRING REG.
• ON: The camera automatically establishes a
Bluetooth connection with paired devices when
Bluetooth
turned on.
ON/OFF
• OFF: The camera does not connect via
Bluetooth.
• ON: Mark photos for upload as they are taken.
OFF: Photos are not marked for upload as they
AUTO IMAGE •
are taken, but JPEG images can be selected for
TRANSFER
upload using the IMAGE TRANSFER ORDER
option in the playback menu.
PC AUTO SAVE SETTINGS
Adjust settings for connection to computers via wireless LAN.
Option
PC AUTO SAVE
SETTING
The Setup Menus
Description
Choose the method used for connection to
computers via a wireless LAN.
• SIMPLE SETUP: Connect using WPS.
• MANUAL SETUP: Choose the network
from a list (SELECT FROM NETWORK
LIST) or enter the name manually (ENTER
SSID).
DELETE REGISTERED
Remove selected destinations.
DESTINATION PC
DETAILS OF PREVIOUS View computers to which the camera has
CONNECTION
recently connected.
instax PRINTER CONNECTION SETTING
8 Adjust settings for connection to optional FUJIFILM
instax SHARE printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on
the bottom of the printer; the default password is “1111”. If you have already chosen
a different password to print from a smartphone, enter that password instead.
242
CONNECTION SETTING
GENERAL SETTINGS
Adjust settings for connection to wireless networks.
Option
The Setup Menus
Description
Choose a name (NAME) to identify the camera
NAME
on the wireless network (the camera is assigned a
unique name by default).
Choose ON (the default setting, recommended in
most circumstances) to resize larger images to H
RESIZE
IMAGE FOR for upload to smartphones, OFF to upload images
SMARTPHONE at their original size. Resizing applies only to the
copy uploaded to the smartphone; the original is
not affected.
Choose whether location data downloaded from a
GEOTAGGING smartphone are embedded in pictures as they are
taken.
LOCATION Display the location data last downloaded from a
INFO
smartphone.
243
CONNECTION SETTING
INFORMATION
View the camera’s MAC and Bluetooth address.
The Setup Menus
RESET WIRELESS SETTING
Restore wireless settings to their default values.
244
Shortcuts
245
Shortcut Options
Customize camera controls to suit your style or
situation.
Shortcuts
Frequently-used options can be added to the Q menu
or a custom “my” menu or assigned to an Fn (function) button for direct access:
• The Q menu (P 247): The Q menu is displayed by
pressing the Q button. Use the Q menu to view or
change the options selected for frequently-used
menu items.
• “My menu” (P 256): Add frequently-used options
to this custom menu, which can be viewed by pressing MENU/OK and selecting the E (“MY MENU”) tab.
• The function buttons (P 252): Use the function buttons for direct access to selected features.
246
The Q (Quick Menu) Button
Press Q for quick access to selected options.
The Quick Menu Display
At default settings, the quick menu contains the following items:
SELECT CUSTOM SETTING
BASE
SET
I HIGHLIGHT TONE
J SHADOW TONE
K COLOR
L SHARPNESS
M SELF-TIMER
N AF MODE
O FLASH FUNCTION SETTING
P EVF/LCD BRIGHTNESS
247
Shortcuts
A SELECT CUSTOM SETTING
B ISO
C DYNAMIC RANGE
D WHITE BALANCE
E NOISE REDUCTION
F IMAGE SIZE
G IMAGE QUALITY
H FILM SIMULATION
The quick menu shows the options currently selected
for items B–P, which can be changed as described
on page 250.
SELECT CUSTOM SETTING
The H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING
item (item A) shows the current custom settings bank:
• q: No custom settings bank selected.
• t–u: Select a bank to view the settings saved using
the H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM
SETTING option.
• r–s: The current custom settings bank.
Shortcuts
248
The Q (Quick Menu) Button
Viewing and Changing Settings
1 Press Q to display the quick
menu during shooting.
Use the focus stick (focus lever) to highlight items and rotate the rear command dial to
change.
SELECT CUSTOM SETTING
BASE
SET
N Changes are not saved to the
Shortcuts
current settings bank. Settings
that differ from those in the
current settings bank (t–
u) are shown in red.
Press Q to exit when settings are complete.
249
Editing the Quick Menu
To choose the items displayed in the quick menu:
Press and hold the Q button
during shooting.
The current quick menu will be displayed; use the
focus stick (focus lever) to highlight the item you
wish to change and press MENU/OK.
Shortcuts
250
The Q (Quick Menu) Button
Highlight any of the following options and press
MENU/OK to assign it to the selected position.
* Stored in custom settings bank.
• FACE/EYE DETECTION SETTING
• MF ASSIST
• TOUCH SCREEN MODE
• SELF-TIMER
• PHOTOMETRY
• SHUTTER TYPE
• ISO
• FLASH FUNCTION SETTING
• FLASH COMPENSATION
• MOVIE MODE
• MIC LEVEL ADJUSTMENT
• EVF/LCD BRIGHTNESS
• EVF/LCD COLOR
• NONE
N Select NONE to assign no option to the select-
ed position. When SELECT CUSTOM SETTING is
selected, current settings are shown in the quick
menu by the label BASE.
N The quick menu can also be edited using D BUTTON/
DIAL SETTING > EDIT/SAVE QUICK MENU.
251
Shortcuts
• IMAGE SIZE
• IMAGE QUALITY
• FILM SIMULATION
• GRAIN EFFECT
• DYNAMIC RANGE
• WHITE BALANCE
• HIGHLIGHT TONE
• SHADOW TONE
• COLOR
• SHARPNESS
• NOISE REDUCTION
• SELECT CUSTOM SETTING
• AF MODE
• AF-C CUSTOM SETTINGS
The Fn (Function) Buttons
The roles played by each of the function buttons can be selected by pressing and holding
the button.
N The functions assigned to T-Fn1 through T-Fn4 can be accessed by flicking the monitor.
The default assignments are:
Shortcuts
Fn1 button
T-Fn1 (flick up)
Photometry
AF mode
T-Fn2 (flick left)
T-Fn3 (flick right)
Film simulation
White balance
252
The Fn (Function) Buttons
T-Fn4 (flick down)
AE-L button
Sensitivity
Exposure lock
AF-L button
Center of rear command dial
Focus lock
Focus check
Shortcuts
253
Assigning Roles to the Function Buttons
To assign roles to the buttons:
Shortcuts
Press and hold the DISP/BACK
button until a button selection
menu is displayed.
Highlight a button and press MENU/OK.
Highlight the desired role and press MENU/OK to
assign it to the selected button. Choose from:
• IMAGE SIZE
• IMAGE QUALITY
• RAW
• FILM SIMULATION
• GRAIN EFFECT
• DYNAMIC RANGE
• WHITE BALANCE
• SELECT CUSTOM SETTING
• FOCUS AREA
• FOCUS CHECK
• AF MODE
• AF-C CUSTOM SETTINGS
• FACE/EYE DETECTION SETTING
• SELF-TIMER
• AE BKT SETTING
• PHOTOMETRY
• SHUTTER TYPE
• ISO
254
• WIRELESS COMMUNICATION
• FLASH FUNCTION SETTING
• TTL-LOCK
• MODELING FLASH
• MIC LEVEL ADJUSTMENT
• PREVIEW DEPTH OF FIELD
• PREVIEW EXP./WB IN MANUAL MODE
• PREVIEW PIC. EFFECT
• HISTOGRAM
• AE LOCK ONLY
• AF LOCK ONLY
• AE/AF LOCK
• AF-ON
• APERTURE SETTING
• AUTO IMAGE TRANSFER
• Bluetooth ON/OFF
• PLAYBACK
• NONE (control disabled)
The Fn (Function) Buttons
Button assignments can also be selected using
D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING.
AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and
AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4).
AF-ON
If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway.
Shortcuts
MODELING FLASH
If MODELING FLASH is selected when a compatible
shoe-mounted flash unit is attached, you can press
the control to test-fire the flash and check for shadows and the like (modeling flash).
TTL-LOCK
If TTL-LOCK is selected, you can press the control to
lock flash output according to the option selected for 9
F FLASH SETTING > TTL-LOCK MODE (P 166).
255
E MY MENU
Access a personalized menu of frequently-used
options.
To display “my menu”, press MENU/OK
in the shooting display and select
the E (MY MENU) tab.
MY MENU
SELF-TIMER
INTERVAL TIMER SHOOTING
FILM SIMULATION
GRAIN EFFECT
SHUTTER TYPE
IS MODE
FACE/EYE DETECTION SETTING
ISO
EXIT
N The E tab is only available if options have been assigned
to MY MENU.
Shortcuts
MY MENU SETTING
To choose the items listed in the E (MY MENU) tab:
Highlight D USER SETTING >
MY MENU SETTING in the D
(SET UP) tab and press MENU/OK
to display the options at right.
256
MY MENU SETTING
ADD ITEMS
RANK ITEMS
REMOVE ITEMS
MY MENU
Press the focus stick (focus lever) up or down to highlight
ADD ITEMS and press MENU/OK.
Options that can be added to
“my menu” are highlighted in
blue.
MY MENU SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
GRAIN EFFECT
DYNAMIC RANGE
WHITE BALANCE
HIGHLIGHT TONE
SELECT
CANCEL
N Items currently in “my menu” are indicated by check
marks.
Highlight an item and press
MENU/OK to add it to “my menu”.
MY MENU SETTING
1 IMAGE SIZE
MOVE
Press MENU/OK to return to the edit display.
Repeat Steps 3 and 4 until all the desired items
have been added.
N “My menu” can contain up to 16 items.
Editing “My Menu”
To reorder or delete items, select RANK ITEMS or REMOVE
ITEMS in Step 1.
257
Shortcuts
SAVE
MEMO
258
Peripherals and
Optional Accessories
259
External Flash Units
Flash units can be mounted on the hot shoe or
connected via the sync terminal.
Peripherals and Optional Accessories
Optional external flash units are more powerful than
the EF-X8 supplied with the camera. Some support
high-speed sync (FP) and can be used at shutter
speeds faster than the sync speed, while others can
function as master flash units controlling remote
units via optical wireless flash control.
O You may be unable to test-fire the flash in some circum-
stances, for example when a setup menu is displayed on
the camera.
10
260
External Flash Units
Flash Settings
To adjust settings for a flash unit mounted on the hot
shoe or connected via the sync terminal:
Connect the unit to the camera.
FLASH SETTING
FLASH FUNCTION SETTING
RED EYE REMOVAL
TTL-LOCK MODE
LED LIGHT SETTING
MASTER SETTING
CH SETTING
EXIT
Menu
Description
SUPPLIED Displayed when the supplied EF-X8 flash unit
107
FLASH is mounted on the hot shoe and raised.
SYNC TERMINAL is displayed if the EF-X8 is
SYNC
lowered and either no flash unit, or an incom- 263
TERMINAL
patible flash unit, is mounted on the hot shoe.
SHOE
Displayed when an optional flash unit is
MOUNT
264
mounted on the hot shoe and turned on.
FLASH
Displayed if an optional flash unit functioning as
MASTER
a master flash for FUJIFILM optical wireless re- 269
(OPTICAL)
mote flash control is connected and turned on.
261
Peripherals and Optional Accessories
In shooting mode, select FLASH
FUNCTION SETTING in the F
(FLASH SETTING) menu tab.
The options available vary with
the flash unit.
10
3
Highlight items using the focus
stick (focus lever) and rotate the
rear command dial to change
the highlighted setting.
Press DISP/BACK to put the changes into effect.
MODE
SUPPLIED FLASH
ADJUST
END
Peripherals and Optional Accessories
Red-Eye Removal
Red-eye removal is available when an option other than OFF
is selected for F FLASH SETTING > RED EYE REMOVAL
and a “FACE ON” option is selected for G AF/MF SETTING >
FACE/EYE DETECTION SETTING. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from
the subject’s retinas.
10
262
External Flash Units
SYNC TERMINAL
SYNC TERMINAL is displayed if the EF-X8 is lowered and either no flash
unit, or an incompatible
flash unit, is mounted on
the hot shoe.
MODE
SYNC TERMINAL
ADJUST
END
Setting
Peripherals and Optional Accessories
Description
Choose from the following options:
• M: A trigger signal is transmitted via the hot shoe X conA Flash tacts when a picture is taken. Choose a shutter speed
control slower than the sync speed; even slower speeds may
mode be required if the unit uses long flashes or has a slow
response time.
• D (OFF): The trigger signal is disabled.
Choose whether the flash is timed to fire immediately
after the shutter opens (H/1ST CURTAIN) or immediately
B Sync before it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in most circumstances.
10
263
SHOE MOUNT FLASH
The following options are
available with optional
shoe-mounted flash units.
MODE
SHOE MOUNT FLASH
ADJUST
Setting
Peripherals and Optional Accessories
A Flash control
mode
10
264
END
Description
The flash control mode selected with the flash
unit. This can in some cases be adjusted from the
camera; the options available vary with the flash.
• TTL: TTL mode. Adjust flash compensation (B).
• M: The flash fires at the selected output regardless of subject brightness or camera settings.
Output in some cases can be adjusted from the
camera (B).
• MULTI: Repeating flash. Compatible shoe-mounted flash units will fire multiple times with each
shot.
• D (OFF): The flash does not fire. Some flash
units can be turned off from the camera.
External Flash Units
Setting
Peripherals and Optional Accessories
Description
The options available vary with flash control mode.
• TTL: Adjust flash compensation (the full value
may not be applied if the limits of the flash control system are exceeded). In the cases of the
EF-X20, EF-20, EF-42, and EF-X500, the selected
value is added to the value selected with the
B Flash compen- flash unit.
sation/output • M/MULTI: Adjust flash output (compatible units
only). Choose from values expressed as fractions
of full power, from ⁄ (mode M) or ¼ (MULTI)
down to ⁄ in increments equivalent to ⁄ EV.
The desired results may not be achieved at low
values if they exceed the limits of the flash control system; take a test shot and check the results.
10
265
Setting
C Flash mode
Peripherals and Optional Accessories
(TTL)
10
266
Description
Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S,
A, or M) selected.
• E (FLASH AUTO): The flash fires only as required;
flash level is adjusted according to subject
brightness. A p icon displayed when the shutter button is pressed halfway indicates that the
flash will fire when the photo is taken.
• F (STANDARD): The flash fires with every shot if
possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully
charged when the shutter is released.
• G (SLOW SYNC.): Combine the flash with slow
shutter speeds when photographing portrait
subjects against a backdrop of night scenery.
The flash will not fire if not fully charged when
the shutter is released.
External Flash Units
Setting
D Sync
F Lighting
267
Peripherals and Optional Accessories
E Zoom
Description
Control flash timing.
• H (1ST CURTAIN): The flash fires immediately after
the shutter opens (generally the best choice).
• I (2ND CURTAIN): The flash fires immediately before the shutter closes.
• R (AUTO FP(HSS)): High-speed sync (compatible
units only). The camera automatically engages
front-curtain high-speed sync at shutter speeds
faster than the flash sync speed. Equivalent to
1ST CURTAIN when MULTI is selected for flash control mode.
The angle of illumination (flash coverage) for units
that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is
selected, zoom will automatically be adjusted to
match coverage to lens focal length.
If the unit supports this feature, choose from:
• J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage.
• K (STANDARD): Match coverage to picture angle.
• L (EVEN COVERAGE PRIORITY): Slightly increase
coverage for more even lighting.
10
Setting
Peripherals and Optional Accessories
Description
Choose how the built-in LED light functions
during still photography (compatible units only):
as a catchlight (M/CATCHLIGHT), as an AF-assist
illuminator (N/AF ASSIST), or as both a catchG LED light
light and an AF-ASSIST illuminator (O/AF ASSIST+
CATCHLIGHT). Choose OFF to disable the LED during
photography.
G Number of Choose the number of times the flash fires each
flashes *
time the shutter is released in MULTI mode.
Choose the frequency at which the flash fires in
H Frequency * MULTI mode.
* Full value may not be applied if limits of flash control system are
exceeded.
10
268
External Flash Units
MASTER(OPTICAL)
The options at right will
be displayed if the unit is
currently functioning as
master flash for FUJIFILM
optical wireless remote
flash control.
MODE
MASTER(OPTICAL)
ADJUST
END
Peripherals and Optional Accessories
The master and remote
units can be placed in up
to three groups (A, B, and
C) and flash mode and
flash level adjusted sepaB
rately for each group. Four
channels are available for
communication between the units; separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity.
10
269
Setting
A Flash control
mode
(group A)
B Flash control
Peripherals and Optional Accessories
mode
(group B)
C Flash control
mode
(group C)
10
270
Description
Choose flash control modes for groups A, B, and C.
TTL% is available for groups A and B only.
• TTL: The units in the group fire in TTL mode. Flash
compensation can be adjusted separately for
each group.
• TTL%: If TTL% is selected for either group A or B,
you can specify the output of the selected group
as a percentage of the other and adjust overall
flash compensation for both groups.
• M: In mode M, the units in the group fire at the
selected output (expressed as a fraction of full
power) regardless of subject brightness or camera settings.
• MULTI: Choosing MULTI for any group sets all the
units in all groups to repeating flash mode. All
units will re multiple times with each shot.
• D (OFF): If OFF is selected, the units in the
group will not re.
External Flash Units
Description
Adjust flash level for the selected group according
to option selected for flash control mode. Note
that the full value may not be applied if the limits
of the flash control system are exceeded.
• TTL: Adjust flash compensation.
• M/MULTI: Adjust flash output.
• TTL%: Choose the balance between groups A and
B and adjust overall flash compensation.
Peripherals and Optional Accessories
Setting
D Flash compensation/output
(group A)
E Flash compensation/output
(group B)
F Flash compensation/output
(group C)
10
271
Setting
G Flash mode
Peripherals and Optional Accessories
(TTL)
10
272
Description
Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S,
A, or M) selected.
• E (FLASH AUTO): The flash fires only as required;
flash level is adjusted according to subject
brightness. A p icon displayed when the shutter button is pressed halfway indicates that the
flash will fire when the photo is taken.
• F (STANDARD): The flash fires with every shot if
possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully
charged when the shutter is released.
• G (SLOW SYNC.): Combine the flash with slow
shutter speeds when photographing portrait
subjects against a backdrop of night scenery.
The flash will not fire if not fully charged when
the shutter is released.
External Flash Units
Setting
H Sync
J Lighting
273
Peripherals and Optional Accessories
I Zoom
Description
Control flash timing.
• H (1ST CURTAIN): The flash fires immediately after
the shutter opens (generally the best choice).
• I (2ND CURTAIN): The flash fires immediately before the shutter closes.
• R (AUTO FP(HSS)): High-speed sync (compatible
units only). The camera automatically engages
front-curtain high-speed sync at shutter speeds
faster than the flash sync speed. Equivalent to
1ST CURTAIN when MULTI is selected for flash control mode.
The angle of illumination (flash coverage) for units
that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is
selected, zoom will automatically be adjusted to
match coverage to lens focal length.
If the unit supports this feature, choose from:
• J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage.
• K (STANDARD): Match coverage to picture angle.
• L (EVEN COVERAGE PRIORITY): Slightly increase
coverage for more even lighting.
10
External Flash Units
Setting
K Master
K Number of
Peripherals and Optional Accessories
flashes
L Channel
L Frequency
10
274
Description
Assign the master flash to group A (Gr A), B (Gr B), or
C (Gr C). If OFF is selected, output from the master
flash will be held to a level that does not affect the
final picture. Available only if the unit is mounted on the camera hot shoe as a master flash for
FUJIFILM optical wireless remote flash control in
TTL, TTL%, or M mode.
Choose the number of times the flash fires each
time the shutter is released in MULTI mode.
Choose the channel used by the master flash
for communication with the remote flash units.
Separate channels can be used for different flash
systems or to prevent interference when multiple
systems are operating in close proximity.
Choose the frequency at which the flash fires in
MULTI mode.
Lenses
The camera can be used with lenses for the
FUJIFILM X-mount.
Lens Parts
Peripherals and Optional Accessories
A Lens hood
B Mounting marks
C Focus ring
D Zoom ring
E Aperture ring
F O.I.S. switch
G Aperture mode switch
H Lens signal contacts
I Front lens cap
J Rear lens cap
10
275
Removing Lens Caps
Remove lens caps as shown.
Peripherals and Optional Accessories
N Lens caps may differ from those shown.
Attaching Lens Hoods
When attached, lens hoods reduce
glare and protect the front lens element.
10
276
Lenses
Lenses with Aperture Rings
At settings other than A, you can
adjust aperture by rotating the lens
aperture ring (exposure modes A
and M).
A 16 11 8 5.6 4 2.8
A 16 11 8 5.6 4
Aperture ring
Aperture ring
Aperture mode switch
N When the aperture ring is set to A, rotate the front command dial to adjust aperture.
Peripherals and Optional Accessories
The Aperture Mode Switch
If the lens has an aperture mode switch,
aperture can be adjusted manually by
sliding the switch to Z and rotating the
aperture ring.
10
277
Lenses with No Aperture Rings
The method used to adjust aperture
can be selected using D BUTTON/
DIAL SETTING > APERTURE SETTING.
When an option other than AUTO is
selected, aperture can be adjusted
using the front command dial.
Peripherals and Optional Accessories
N Aperture control defaults to the front command dial,
but can be reassigned to the rear command dial using
D BUTTON/DIAL SETTING > COMMAND DIAL SETTING.
Lenses with O.I.S. Switches
If the lens supports optical image
stabilization (O.I.S.), the image
stabilization mode can be chosen
in the camera menus. To activate
image stabilization, slide the O.I.S.
switch to ON.
10
278
O.I.S. switch
Lenses
Manual Focus Lenses
Slide the focus ring to the front for
autofocus.
O Note that manual focus may not be available in all shooting
modes.
The Depth-of-Field Indicator
The depth-of-field indicator shows the
approximate depth of field (the distance
in front of and behind the focus point
that appears to be in focus). The indicator is displayed in film format.
Peripherals and Optional Accessories
For manual focus, slide the focus
ring to the back and rotate it while
checking the results in the camera
display. The focus distance and
depth-of-field indicators can be
used to assist manual focus.
10
279
Lenses
Lens Care
Use a blower to remove dust, then gently wipe with a
soft, dry cloth. Any remaining stains can be removed
by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning
fluid has been applied. Replace the front and rear
caps when the lens is not in use.
Peripherals and Optional Accessories
10
280
Connections
281
HDMI Output
Camera shooting and playback displays can be
output to HDMI devices.
Connecting to HDMI Devices
Connect the camera to TVs or other HDMI devices using a third-party HDMI cable.
Turn the camera off.
Connect the cable as shown below, making sure
the connectors are fully inserted.
Insert into HDMI
connector
Connections
Insert into HDMI Micro
connector (Type D)
O Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
11
Configure the device for HDMI input as described
in the documentation supplied with the device.
282
HDMI Output
Turn the camera on. You can now shoot and play
back pictures while viewing the television display and save pictures to the HDMI device.
O The USB cable cannot be used while an HDMI cable is
connected.
Shooting
Shoot photos and record movies while viewing the
scene through the camera lens on or saving footage
to the HDMI device.
N This feature can be used to save 4K and Full HD movies
to an HDMI recorder.
Playback
To start playback, press the camera a button. The
camera monitor turns off and pictures and movies
are output to the HDMI device. Note that the camera
volume controls have no effect on sounds played on
the TV; use the television volume controls to adjust
the volume.
Connections
O Some televisions may briefly display a black screen when
11
movie playback begins.
283
Wireless Transfer
Access wireless networks and connect to computers, smartphones, or tablets. For more information, visit:
http://fujifilm-dsc.com/wifi/
fujifilm Wi-Fi app
Smart Phones and Tablets: FUJIFILM Camera Remote
Install the latest version of the FUJIFILM Camera
Remote app on your smartphone or tablet to connect to the camera via BluetoothÂŽ or Wi-Fi. For downloads and other information, visit:
http://app.fujifilm-dsc.com/en/camera_remote/
Connections
11
284
Wireless Transfer
Smart Phones and Tablets: BluetoothÂŽ Pairing
Use D CONNECTION SETTING > Bluetooth SETTINGS >
PAIRING REGISTRATION to pair the camera with smartphones or tablets. Pairing offers a simple method for
downloading photos from the camera.
N Photos are downloaded via a wireless connection.
Connections
Smartphones and Tablets: Wi-Fi
Use the WIRELESS COMMUNICATION options in
A SHOOTING SETTING or the playback menu to connect to a smartphone or tablet via Wi-Fi. Once connected, you can browse the images on the camera, download selected images, control the camera remotely, or
copy location data to the camera.
11
285
Wireless Transfer
Computers: FUJIFILM PC AutoSave
Install the latest version of FUJIFILM PC Autosave to
your computer to upload pictures from the camera
over wireless networks. For downloads and other information, visit:
http://app.fujifilm-dsc.com/en/pc_autosave/
Computers: Wireless Connections
You can upload pictures from the camera using the
PC AUTO SAVE option in the playback menu.
Connections
11
286
Connecting to Computers via USB
Copy pictures to a computer via USB.
Windows (MyFinePix Studio)
Use MyFinePix Studio to copy pictures to your computer, where they can be stored, viewed, organized,
and printed. MyFinePix Studio is available for download from the following website:
http://fujifilm-dsc.com/mfs/
fujifilm mfs
Once download is complete, double-click the downloaded file (“MFPS_Setup.EXE”) and follow the onscreen instructions to complete installation.
Connections
Mac OS X/macOS
Pictures can be copied to your computer using Image
Capture (supplied with your computer) or other software.
RAW FILE CONVERTER EX 2.0
To view RAW files on your computer, use RAW FILE 11
CONVERTER EX 2.0, available for download from:
http://fujifilm-dsc.com/rfc/
fujifilm rfc
287
Connecting the Camera
1 Find a memory card containing pictures you
want to copy to the computer and insert the card
into the camera.
O Loss of power during transfer could result in loss of
data or damage to the memory card. Insert a fresh or
fully-charged battery before connecting the camera.
Ready a third-party USB 2.0 cable with a Micro
USB (Micro-B) connector. Turn the camera off and
connect the cable, making sure the connectors
are fully inserted.
Connections
11
O The USB cable must be no more than 1.5 m (4.9 ft.)
long and be suitable for data transfer.
288
Connecting to Computers via USB
Turn the camera on.
When transfer is complete, turn the camera off
and disconnect the USB cable.
Copy pictures to the computer using MyFinePix
Studio or applications provided with your operating system.
Connections
11
289
Connecting to Computers via USB
If a memory card containing a large number of images is
inserted, there may be a delay before the software starts
and you may be unable to import or save images. Use a
memory card reader to transfer pictures.
Connect the camera directly to the computer; do not
use a USB hub or keyboard.
Make sure that the computer does not display a message stating that copying is in progress and that the
indicator lamp is out before turning the camera off or
disconnecting the USB cable (if the number of images
copied is very large, the indicator lamp may remain lit after the message has cleared from the computer display).
Failure to observe this precaution could result in loss of
data or damage to the memory card.
Disconnect the camera before inserting or removing
memory cards.
Connections
11
In some cases, it may not be possible to access pictures
saved to a network server using the software in the same
way as on a standalone computer.
The user bears all applicable fees charged by the phone
company or Internet service provider when using services that require an Internet connection.
290
instax SHARE Printers
Print pictures from your digital camera to instax
SHARE printers.
Establishing a Connection
Select D CONNECTION SETTING > instax PRINTER
CONNECTION SETTING and enter the instax SHARE
printer name (SSID) and password.
The Printer Name (SSID) and Password
The printer name (SSID) can be found
on the bottom of the printer; the default
password is “1111”. If you have already
chosen a different password to print
from a smartphone, enter that password
instead.
Connections
11
291
instax SHARE Printers
Printing Pictures
1 Turn the printer on.
Select C PLAY BACK MENU >
instax PRINTER PRINT. The
camera will connect to the
printer.
PRINTER PRINT
instax-12345678
CONNECTING TO PRINTER
FUJIFILM-CAMERA-1234
CANCEL
To print a frame from a burst sequence, display the
frame before selecting instax PRINTER PRINT.
Use the focus stick (focus lever)
to display the picture you want
to print, then press MENU/OK.
PRINTER PRINT
100-0020
TRANSMIT
instax-12345678
CANCEL
N Pictures taken with other cameras cannot be printed.
Connections
The area printed is smaller than the area visible in
the LCD monitor.
The picture will be sent to the printer and printing will start.
11
292
Technical Notes
293
Accessories from FUJIFILM
The following optional accessories are available
from FUJIFILM. For the latest information on
the accessories available in your region, check
with your local FUJIFILM representative or visit
http://www.fujifilm.com/products/digital_cameras/index.html.
Rechargeable Li-ion batteries
NP-W126/NP-W126S: Additional high-capacity NP-W126/
NP-W126S rechargeable batteries can be purchased as
required.
Battery chargers
BC-W126: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126
charges an NP-W126/NP-W126S in about 150 minutes.
Technical Notes
AC power adapters
AC-9V (requires CP-W126 DC coupler): Use this 100–240 V, 50/60 Hz AC
power adapter for extended shooting and playback or when copying pictures to a computer.
DC couplers
CP-W126: Connect the AC-9V to the camera.
12
294
Accessories from FUJIFILM
Remote releases
RR-90: Use to reduce camera shake or keep the shutter
open during a time exposure.
Stereo microphones
MIC-ST1: An external microphone for movie recording.
FUJINON lenses
XF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
Technical Notes
Shoe-mounted flash units
EF-X500: This clip-on flash unit has a Guide Number of
50/164 (ISO 100, m/ft.) and supports FP (high-speed
sync), allowing it to be used at shutter speeds that
exceed the flash sync speed. Powered by four AA batteries or an optional EF-BP1 battery pack, it supports
manual and TTL flash control and auto power zoom
in the range 24–105 mm (35 mm format equivalent)
and features FUJIFILM optical wireless flash control,
allowing it to be used as a master or remote flash unit
for remote wireless flash photography. The flash head
can be rotated 90° up, 10° down, 135° left, or 180° right
for bounce lighting.
12
295
Shoe-mounted flash units (continued)
EF-42: This clip-on flash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.)
and supports manual and TTL flash control and auto
power zoom in the range 24–105 mm (35 mm format
equivalent). The flash head can be rotated 90° up, 180°
left, or 120° right for bounce lighting.
EF-X20: This clip-on flash unit has a Guide Number of
20/65 (ISO 100, m/ft.). Powered by two AAA batteries,
this light, compact unit features a dial for adjusting TTL
flash compensation or manual flash output.
EF-20: This clip-on flash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.)
and supports TTL flash control (manual flash control
is not supported). The flash head can be rotated upwards 90° for bounce lighting.
Technical Notes
12
Hand grips
MHG-XE3: Features an improved grip. Batteries and memory cards
can be removed with the grip in place, and the grip is equipped
with a rail for quick-shoe camera mounts.
Leather cases
BLC-XE3: This case combines practicality with the luxury of leather
and comes with a cloth that can be used to wrap the camera before
putting it in the case and on other occasions. Pictures can be taken
and batteries inserted or removed with the camera still in its case.
296
Accessories from FUJIFILM
Grip belts
GB-001: Improves grip. Combine with a hand grip for more secure
handling.
Macro extension tubes
MCEX-11/16: Attach between the camera and the lens to shoot at
high reproduction ratios.
Teleconverters
XF1.4X TC WR: Increases the focal length of the compatible lenses
by about 1.4×.
XF2X TC WR: Increases the focal length of the compatible lenses by
about 2.0×.
Mount adapters
FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a
wide selection of M-mount lenses.
Body caps
BCP-001: Cover the camera lens mount when no lens is attached.
instax SHARE printers
SP-1/SP-2: Connect via wireless LAN to print pictures on instax lm.
Technical Notes
12
297
Software from FUJIFILM
The camera can be used with the following
FUJIFILM software.
FUJIFILM Camera Remote
Establish a wireless connection between your camera and a smartphone or tablet (P 284).
http://app.fujifilm-dsc.com/en/camera_remote/
FUJIFILM PC AutoSave
Download pictures from your camera over wireless
networks (P 286).
http://app.fujifilm-dsc.com/en/pc_autosave/
Technical Notes
12
298
Software from FUJIFILM
MyFinePix Studio
Manage, view, print, and edit the many images
downloaded from your digital camera (P 287).
http://fujifilm-dsc.com/mfs/
fujifilm mfs
RAW FILE CONVERTER EX 2.0
View RAW pictures on your computer and convert
them into other formats (P 287).
http://fujifilm-dsc.com/rfc/
fujifilm rfc
Technical Notes
12
299
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
Instructions: All the safety and operating in• Read Instructions
structions should be read before the appliance
is operated.
Instructions: The safety and operating in• Retain Instructions
structions should be retained for future reference.
Warnings: All warnings on the appliance and
• Heed Warnings
in the operating instructions should be adhered to.
Follow
Instructions
Instructions: All operating and use instruc•
tions should be followed.
Technical Notes
12
Installation
Power Sources: This video product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type
of power supply to your home, consult your appliance dealer or local power company. For video
products intended to operate from battery power,
or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is
equipped with a polarized alternating-current
line plug (a plug having one blade wider than the
other). This plug will t into the power outlet only
one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to t, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
Alternate Warnings: This video product is
equipped with a three-wire grounding-type plug,
a plug having a third (grounding) pin. This plug
will only t into a grounding-type power outlet.
This is a safety feature. If you are unable to insert
the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding type plug.
Overloading: Do not overload wall outlets and
extension cords as this can result in a risk of re
or electric shock.
300
Ventilation: Slots and openings in the cabinet are
provided for ventilation, to ensure reliable operation of the video product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never
be blocked by placing the video product on a
bed, sofa, rug, or other similar surface.
This video product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
This video product should never be placed near
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by the video product manufacturer as
they may cause hazards.
Water and Moisture: Do not use this video product
near water—for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Power-Cord Protection: Power-supply cords should
be routed so that they are not likely to be walked
on or pinched by items placed upon or against
them, paying particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from the appliance.
Accessories: Do not place this video product on an
unstable cart, stand, tripod, bracket, or table. The
video product may fall, causing serious injury to a
child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer, or
sold with the video product. Any mounting of
the appliance should follow the manufacturer’s
instructions, and should use a mounting accessory recommended by the manufacturer.
For Your Safety
An appliance and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the appliance and cart
combination to overturn.
Antennas
Outdoor Antenna Grounding: If an outside antenna
or cable system is connected to the video product,
be sure the antenna or cable system is grounded
so as to provide some protection against voltage
surges and built-up static charges. Section 810 of
the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding
of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Elec Service
Electric
Equipmentt
AAnntenna
Discharge Unitt
(NEC
N SECTION
810-20)
Ground Clamps
Grounding
Conductors (NEC
Power Service Grounding
SECTION 810-21)
Electrode System (NEC
ART 250. PART H)
Power Lines: An outside antenna system should not
be located in the vicinity of overhead power lines
or other electric light or power circuits, or where
it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
Service
Servicing: Do not attempt to service this video product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualied service personnel.
Damage Requiring Service: Unplug this video product
from the wall outlet and refer servicing to qualied
service personnel under the following conditions:
• When the power-supply cord or plug is damaged
• If liquid has been spilled, or objects have fallen
into the video product.
• If the video product has been exposed to rain
or water.
• If the video product has been dropped or the
cabinet has been damaged.
If the video product does not operate normally
follow the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualied technician to
restore the video product to its normal operation.
When the video product exhibits a distinct change
in performance — this indicates a need for service.
301
Technical Notes
Ground Clamp
Use
Cleaning: Unplug this video product from the wall
outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any
kind into this video product through openings as
they may touch dangerous voltage points or short
out parts that could result in a re or electric shock.
Never spill liquid of any kind on the video product.
Lightning: For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This
will prevent damage to the video product due to
lightning and power-line surges.
12
Replacement Parts: When replacement parts are
required, be sure the service technician has used
replacement parts specied by the manufacturer
or have the same characteristics as the original
part. Unauthorized substitutions may result in
re, electric shock or other hazards.
Safety Check: Upon completion of any service or
repairs to this video product, ask the service technician to perform safety checks to determine that
the video product is in proper operating condition.
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correct-
The symbols on the product (including the accesories) represent the following:
AC
DC
Class II equipment (The construction of
the product is double-insulated.)
ly. Read these safety notes and your Owner’s
Manual carefully before use.
• After reading these safety notes, store them in
a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated
by the icon is ignored and the product is used
incorrectly as a result.
This icon indicates that death
WARNING or serious injury can result if
the information is ignored.
This icon indicates that personal
CAUTION injury or material damage can result if the information is ignored.
Technical Notes
12
The icons shown below are used to indicate the nature of the instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you
that the action indicated is prohibited
(“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed
(“Required”).
302
WARNING
If a problem arises, turn the camera off, remove the battery, and disconnect and unplug
the AC power adapter. Continued use of the
Unplug camera when it is emitting smoke, is emitfrom power ting any unusual odor, or is in any other
socket
abnormal state can cause a re or electric
shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter
the camera. If water or foreign objects get
inside the camera, turn the camera off,
remove the battery, and disconnect and
unplug the AC power adapter. Continued
use of the camera can cause a re or electric shock. Contact your FUJIFILM dealer.
Do not
use in the
bathroom
or shower
Do not
disassemble
Do not use the camera in the bathroom or
shower. This can cause a re or electric
shock.
Never attempt to change or take apart the
camera (never open the case). Failure to
observe this precaution can cause re or
electric shock.
For Your Safety
Do not
touch
internal
parts
WARNING
Should the case break open as the result of a
fall or other accident, do not touch the exposed
parts. Failure to observe this precaution
could result in electric shock or in injury
from touching the damaged parts. Remove
the battery immediately, taking care to avoid
injury or electric shock, and take the product
to the point of purchase for consultation.
Do not change, heat or unduly twist or pull
the connection cord and do not place heavy
objects on the connection cord. These actions could damage the cord and cause a
re or electric shock. If the cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This can cause the camera to fall or
tip over and cause injury.
Never attempt to take pictures while in motion.
Do not use the camera while walking or
driving. This can result in you falling down
or being involved in a trac accident.
Do not touch any metal parts of the camera
during a thunderstorm. This can cause an
electric shock due to induced current
from the lightning discharge.
Do not use the battery except as specified.
Load the battery as shown by the indicator.
Do not disassemble, modify, or heat batteries. Do
not drop, strike, or throw batteries or otherwise
subject them to strong impacts. Do not use batteries that show signs of leaking, deformation,
discoloration, or other abnormalities. Use only
designated chargers to recharge rechargeable
batteries and do not attempt to recharge non-rechargeable Li-ion or alkaline batteries. Do not
short batteries or store them with metallic objects. Failure to observe these precautions
could result in the batteries overheating,
igniting, rupturing, or leaking, causing re,
burns, or other injury.
Use only batteries or AC power adapters
specified for use with this camera. Do not use
voltages other than the power supply voltage
shown. The use of other power sources
can cause a re.
If the battery leaks and fluid gets in contact with
your eyes, skin or clothing, flush the affected
area with clean water and seek medical attention or call an emergency number right away.
Do not use the charger to charge batteries
other than those specified here. The supplied
charger is for use only with batteries of the
type supplied with the camera. Using the
charger to charge conventional batteries or
other types of rechargeable batteries can
cause the battery to leak, overheat or burst.
Using a flash too close to a person’s eyes may
cause visual impairment. Take particular
care when photographing infants and
young children.
Do not remain in prolonged contact with
hot surfaces. Failure to observe this precaution could result in low-temperature
burns, particularly at high ambient temperatures or with users who suffer from
poor circulation or reduced sensation, in
which case use of a tripod or similar precautions are recommended.
Do not leave one part of the body in contact
with the product for prolonged periods while
the product is on. Failure to observe this
precaution could result in low-temperature burns, particularly during prolonged
use, at high ambient temperatures, or
with users who suffer from poor circulation or reduced sensation, in which case
use of a tripod or similar precautions are
recommended.
Do not use in the presence of flammable objects, explosive gases, or dust.
303
Technical Notes
WARNING
12
WARNING
CAUTION
When carrying the battery, install it in a digital camera or keep it in the hard case. When
storing the battery, keep it in the hard case.
When discarding, cover the battery terminals
with insulation tape. Contact with other
metallic objects or batteries could cause
the battery to ignite or burst.
Keep memory cards, hot shoes, and other
small parts out of the reach of small children.
Children may swallow small parts; keep
out of reach of children. Should a child
swallow a small part, seek medical attention or call emergency.
Keep out of reach of small children. Among
the elements that could cause injury are the
strap, which could become entangled about
a child’s neck, causing strangulation, and the
flash, which could cause visual impairment.
Follow the directions of airline and hospital
personnel. This product generates radio-frequency emissions that could interfere with
navigational or medical equipment.
Do not cover or wrap the camera or the AC
power adapter in a cloth or blanket. This can
cause heat to build up and distort the casing or cause a re.
When you are cleaning the camera or you do
not plan to use the camera for an extended
period, remove the battery and disconnect
and unplug the AC power adapter. Failure
to do so can cause a re or electric shock.
When charging ends, unplug the charger from the
power socket. Leaving the charger plugged
into the power socket can cause a re.
When a memory card is removed, the card could
come out of the slot too quickly. Use your finger to
hold it and gently release the card. Injury could
result to those struck by the ejected card.
Request regular internal testing and cleaning
for your camera. Build-up of dust in your
camera can cause a re or electric shock.
Contact your FUJIFILM dealer to request
internal cleaning every two years. Please
note that this service is not free of charge.
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
CAUTION
Technical Notes
12
Do not use this camera in locations affected by
oil fumes, steam, humidity or dust. This can
cause a re or electric shock.
Do not leave this camera in places subject to extremely high temperatures. Do not leave the
camera in locations such as a sealed vehicle
or in direct sunlight. This can cause a re.
Do not place heavy objects on the camera.
This can cause the heavy object to tip over
or fall and cause injury.
Do not move the camera while the AC power
adapter is still connected. Do not pull on the
connection cord to disconnect the AC power adapter. This can damage the power cord
or cables and cause a re or electric shock.
304
For Your Safety
The Battery and Power Supply
Note: Check the type of battery used in your camera ■ Battery Life
and read the appropriate sections.
At normal temperatures, the battery can be reThe following describes the proper use of batter- charged about 300 times. A noticeable decrease
ies and how to prolong their life. Incorrect use can in the length of time the battery will hold a
shorten battery life or cause leakage, overheating, charge indicates that it has reached the end of its
service life and should be replaced.
re, or explosion.
■ Storage
Li-ion Batteries
Performance may be impaired if the battery is left
Read this section if your camera uses a rechargeable
unused for extended periods when fully charged.
Li-ion battery.
Run the battery flat before storing it.
The battery is not charged at shipment. Charge
If the camera will not be used for an extended pethe battery before use. Keep the battery in its case
riod, remove the battery and store it in a dry place
when not in use.
with an ambient temperature of from +15 °C to
■ Notes on the Battery
+25 °C (+59 °F to +77 °F). Do not store in locaThe battery gradually loses its charge when not in tions exposed to extremes of temperature.
use. Charge the battery one or two days before use.
■ Cautions: Handling the Battery
Battery life can be extended by turning the cam- • Do not transport or store with metal objects
era off when not in use.
such as necklaces or hairpins.
Battery capacity decreases at low temperatures; • Do not expose to flame or heat.
a depleted battery may not function when cold. • Do not disassemble or modify.
Keep a fully charged spare battery in a warm • Use with designated chargers only.
place and exchange as necessary, or keep the • Dispose of used batteries promptly.
battery in your pocket or other warm place and • Do not drop or subject to strong physical shocks.
insert it in the camera only when shooting. Do • Do not expose to water.
not place the battery in direct contact with hand • Keep the terminals clean.
warmers or other heating devices.
• The battery and camera body may become warm
to the touch after extended use. This is normal.
■ Charging the Battery
305
Technical Notes
Charge the battery in the supplied battery char- ■ Disposal
ger. Charging times will increase at ambient tem- Dispose of used batteries in accord with local
peratures below +10 °C (+50 °F) or above +35 °C regulations.
(+95 °F). Do not attempt to charge the battery at
temperatures above 40 °C (+104 °F); at temperatures
below 0 °C (+32 °F), the battery will not charge.
Do not attempt to recharge a fully charged battery. The battery does not however need to be
fully discharged before charging.
The battery may be warm to the touch immediately after charging or use. This is normal.
12
AC Power Adapters (Available Separately)
Use only FUJIFILM AC power adapters designated
for use with this camera. Other adapters could
damage the camera.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected to
the camera.
• Turn the camera off before disconnecting the
adapter. Disconnect the adapter by the plug,
not the cable.
touch during use. This is normal.
• If the adapter causes radio interference, reorient
or relocate the receiving antenna.
Using the Camera
not aim the camera at extremely bright Handling
light sources, such as the sun in a cloudless sky. To ensure that images are recorded correctly,
Failure to observe this precaution could damage do not subject the camera to impact or physical
the camera image sensor.
shocks while images are being recorded.
• Strong sunlight focused through the viewfinder Liquid Crystal
may damage the panel of electronic viewnder
In the event that the display is damaged, care
(EVF). Do not aim the electronic viewnder at
should be taken to avoid contact with liquid crysthe sun.
tal. Take the urgent action indicated should any of
Take Test Shots
the following situations arise:
Before taking photographs on important occa- • If liquid crystal comes in contact with your skin,
sions (such as at weddings or before taking the clean the area with a cloth and then wash thorcamera on a trip), take a test shot and view the oughly with soap and running water.
results to ensure that the camera is functioning • If liquid crystal enters your eyes, flush the affectnormally. FUJIFILM Corporation cannot accept ed eye with clean water for at least 15 minutes
liability for damages or lost prots incurred as a and then seek medical assistance.
result of product malfunction.
• If liquid crystal is swallowed, rinse your mouth
thoroughly with water. Drink large quantities of
Notes on Copyright
water and induce vomiting, then seek medical
Unless intended solely for personal use, images
assistance.
recorded using your digital camera system cannot
be used in ways that infringe copyright laws with- Although the display is manufactured using exout the consent of the owner. Note that some tremely high-precision technology, it may contain
restrictions apply to the photographing of stage pixels that are always lit or that do not light. This is
performances, entertainments, and exhibits, even not a malfunction, and images recorded with the
when intended purely for personal use. Users are product are unaffected.
also asked to note that the transfer of memory
cards containing images or data protected under
copyright laws is only permissible within the restrictions imposed by those copyright laws.
• Do
Technical Notes
12
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the
306
For Your Safety
Trademark Information
Digital Split Image is a trademark or registered
trademark of FUJIFILM Corporation. xD-Picture
Card and E are trademarks of FUJIFILM
Corporation. The typefaces included herein are
solely developed by DynaComware Taiwan Inc.
Macintosh, Mac OS, and macOS are trademarks
of Apple Inc. in the U.S.A. and other countries.
Windows is a registered trademark of Microsoft
Corporation in the U.S.A. and other countries.
Wi-FiÂŽ and Wi-Fi Protected SetupÂŽ are registered
trademarks of the Wi-Fi Alliance. The BluetoothÂŽ
word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc., and any use
of such marks by FUJIFILM is under license. The
SDHC and SDXC logos are trademarks of SD-3C,
LLC. The HDMI logo is a trademark. All other trade
names mentioned in this manual are the trademarks or registered trademarks of their respective
owners.
Color Television Systems
NTSC (National Television System Committee) is
a color television telecasting specication adopted mainly in the U.S.A., Canada, and Japan. PAL
(Phase Alternation by Line) is a color television
system adopted mainly in European countries
and China.
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera le
format in which information stored with photographs is used for optimal color reproduction
during printing.
IMPORTANT NOTICE: Read Before Using the Software
Direct or indirect export, in whole or in part, of
licensed software without the permission of the
applicable governing bodies is prohibited.
Electrical Interference
This camera may interfere with hospital or aviation equipment. Consult with hospital or airline
staff before using the camera in a hospital or on
an aircraft.
NOTICES
Technical Notes
To prevent re or shock hazard, do not expose the unit to rain or moisture.
Please read the “Safety Notes” and make sure you understand them before using the camera.
Perchlorate Material—special handling may apply. See:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
12
307
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Technical Notes
FCC Statement: This device complies with Part
15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not
cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
CAUTION: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
12
308
FCC Caution: Any changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Radiation Exposure Statement: This device meets the
government’s requirements for exposure to radio
waves. This device is designed and manufactured
not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The exposure standard for wireless device employs
a unit of measurement known as the Specic
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6W/kg. Tests for SAR are conducted using
standard operating positions accepted by the FCC
with the device transmitting at its highest certied
power level in all tested frequency bands.
Notes on the Grant: To comply with Part 15 of
the FCC Rules, this product must be used with a
Fujilm-specied ferrite-core A/V cable, USB cable, and DC supply cord.
A lithium ion battery that is recyclable powers the product
you have purchased. Please call
1-800-8-BATTERY for information
on how to recycle this battery.
For Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies
with Canadian ICES-003.
Industry Canada statement: This device complies
with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device may not cause interference;
and (2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
For Your Safety
This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled
for products marketed in the US/ Canada.
Radiation Exposure Statement: The available scientic evidence does not show that any health
problems are associated with using low power
wireless devices. There is no proof, however, that
these low power wireless devices are absolutely
safe. Low power Wireless devices emit low levels
of radio frequency energy (RF) in the microwave
range while being used. Whereas high levels of
RF can produce health effects (by heating tissue),
exposure of low-level RF that does not produce
heating effects causes no known adverse health
effects. Many studies of low-level RF exposures
have not found any biological effects. Some
studies have suggested that some biological
effects might occur, but such findings have not
been conrmed by additional research. X-E3 has
been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio
frequency (RF) Exposure rules.
This symbol on the batteries or accumulators indicates that those batteries shall not be treated as household
waste.
If your equipment contains easy removable
batteries or accumulators please dispose these
separately according to your local requirements.
The recycling of materials will help to conserve
natural resources. For more detailed information
about recycling this product, please contact your
local city oce, your household waste disposal
service or the shop where you purchased the
product.
In Countries Outside the European Union, Norway,
Iceland and Liechtenstein: If you wish to discard
this product, including the batteries or accumulators, please contact your local authorities and ask
for the correct way of disposal.
In Japan: This symbol on the batteries
indicates that they are to be disposed
of separately.
Technical Notes
Disposal of Electrical and Electronic Equipment in Private
Households
In the European Union, Norway, Iceland
and Liechtenstein: This symbol on the
product, or in the manual and in the
warranty, and/or on its packaging
indicates that this product shall not
be treated as household waste. Instead it should
be taken to an applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences to the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product.
12
309
Technical Notes
12
Wireless Network and Bluetooth Devices: Cautions
This product complies with the following EU • Use only in the country in which the device was
Directives:
purchased. This device conforms to regulations
governing wireless network and Bluetooth de• RoHS Directive 2011/65/EU
vices in the country in which it was purchased.
• RE Directive 2014/53/EU
Hereby, FUJIFILM Corporation declares that the Observe all location regulations when using the
radio equipment type FF170001 is in compliance device. FUJIFILM does not accept liability for
problems arising from use in other jurisdictions.
with Directive 2014/53/EU.
Do not use the device in locations subject to magThe full text of the EU declaration of conformity is •
netic fields, static electricity, or radio interference.
available at the following internet address: http://
Do not use the transmitter in the vicinity of miwww.fujifilm.com/products/digital_cameras/x/
crowave ovens or in other locations subject to
fujifilm_x_e3/pdf/index/fujifilm_x_e3_cod.pdf
magnetic elds, static electricity, or radio interThis compliance is indicated by the following ference that may prevent reception of wireless
conformity marking placed on the product:
signals. Mutual interference may occur when
the transmitter is used in the vicinity of other
wireless devices operating in the 2.4 GHz band.
This marking is valid for non-Telecom products and • The wireless transmitter operates in the 2.4 GHz
EU harmonized Telecom products (e.g. BluetoothÂŽ). band using DSSS, OFDM and GFSK modulation.
Security: Wireless network and Bluetooth deIMPORTANT: Read the following notices before using •
vices transmit data via radio and consequently
the camera’s built-in wireless transmitter.
their use requires greater attention to security
Q This product, which contains encryption than applies in the case of wired networks.
function developed in the United States,
- Do not connect to unknown networks or
is controlled by the United States Export
networks to which you do not have access
Administration Regulations and may not be exrights, even if they are displayed on your
ported or re-exported to any country to which
device, as such access may be considered
the United States embargoes goods.
unauthorized. Connect only to networks to
which you have access rights.
Use
only
wireless
network
or
Bluetooth
device.
device
•
FUJIFILM does not accept liability for damages
- Be aware that wireless transmissions may be
vulnerable to interception by third parties.
resulting from unauthorized use. Do not use
in applications requiring a high degree of reli- • The following may be punishable by law:
ability, for example in medical devices or other
- Disassembly or modication or this device
systems that may directly or indirectly impact
- Removal of device certication labels
human life. When using the device in comput- • This device operates on the same frequency as comer and other systems that demand a greater mercial, educational, and medical devices and wiredegree of reliability than offered by wireless less transmitters. It also operates on the same
network or Bluetooth devices, be sure to take frequency as licensed transmitters and special
all necessary precautions to ensure safety and unlicensed low-voltage transmitters used in
RFID tracking systems for assembly lines and in
prevent malfunction.
other similar applications.
310
For Your Safety
• To prevent interference with the above devices, ob- • Do not use this device on board an aircraft. Note that
serve the following precautions. Conrm that the
RFID transmitter is not in operation before using
this device. Should you observe that the device
causes interference in licensed transmitters
used for RFID tracking, immediately stop using
the affected frequency or move the device to
another location. If you notice that this device
causes interference in low-voltage RFID tracing
systems, contact a FUJIFILM representative.
Bluetooth may remain on even when the camera
is off. Bluetooth can be disabled by selecting OFF
for D CONNECTION SETTING > Bluetooth
SETTINGS > Bluetooth ON/OFF.
Technical Notes
12
311
For Your Safety
Be sure to read these notes before use
Safety Notes
WARNING
• Make sure that you use the lens correctly. Read
Should the case break open as the result of a
fall or other accident, do not touch the exposed
parts. Failure to observe this precaution
could result in electric shock or in injury
from touching the damaged parts. Remove
the battery immediately, taking care to avoid
injury or electric shock, and take the product
to the point of purchase for consultation.
Do not place on unstable surfaces. The product may fall, causing injury.
Do not view the sun through the lens or camera
viewfinders. Failure to observe this precaution
can cause permanent visual impairment.
these safety notes and the camera Owner’s
Manual carefully before use.
• After reading these safety notes, store them in
a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated
by the icon is ignored and the product is used
incorrectly as a result.
This icon indicates that death
WARNING or serious injury can result if
the information is ignored.
This icon indicates that personal
CAUTION injury or material damage can result if the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
Technical Notes
12
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you
that the action indicated is prohibited
(“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed
(“Required”).
WARNING
Do not
immerse
Do not
disassemble
Do not immerse in or expose to water. Failure
to observe this precaution can cause a re
or electric shock.
Do not disassemble (do not open the case).
Failure to observe this precaution can
cause re, electric shock, or injury due to
product malfunction.
312
Do not
touch
internal
parts
CAUTION
Do not use or store in locations that are exposed to steam, or smoke or are very humid
or extremely dusty. Failure to observe this
precaution can cause re or electric shock.
Do not leave in direct sunlight or in locations
subject to very high temperatures, such as in
a closed vehicle on a sunny day. Failure to
observe this precaution can cause re.
Keep out of the reach of small children. This
product could cause injury in the hands
of a child.
Do not handle with wet hands. Failure to
observe this precaution can cause electric
shock.
Keep the sun out of the frame when shooting
backlit subjects. Sunlight focused into the
camera when the sun is in or close to the
frame can cause re or burns.
When the product is not in use, replace the lens
caps and store out of direct sunlight. Sunlight
focused by the lens can cause re or burns.
Do not carry the camera or lens while they are
attached to a tripod. The product can fall or
strike other objects, causing injury.
Product Care
To ensure continued enjoyment of the product,
observe the following precautions.
Camera body: Use a soft, dry cloth to clean the camera
body after each use. Do not use alcohol, thinner, or
other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on
the camera should be removed immediately with
a soft, dry cloth. Use a blower to remove dust from
the monitor, taking care to avoid scratches, and then
gently wipe with a soft, dry cloth. Any remaining
stains can be removed by wiping gently with a piece
of FUJIFILM lens-cleaning paper to which a small
amount of lens-cleaning fluid has been applied. To
prevent dust entering the camera, replace the body
cap when no lens is in place.
Technical Notes
Image sensor: Multiple photographs marred by spots
or blotches in identical locations may indicate the
presence of dust on the image sensor. Clean the sensor using D USER SETTING > SENSOR CLEANING.
12
313
Cleaning the Image Sensor
Dust that cannot be removed using D USER
SETTING > SENSOR CLEANING can be removed manually as described below.
O Note that there will be a charge to repair or replace the
image sensor if it is damaged during cleaning.
Use a blower (not a brush) to
remove dust from the sensor.
O Do not use a brush or blower
brush. Failure to observe this
precaution could damage the
sensor.
Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary.
Replace the body cap or lens.
Technical Notes
12
314
Firmware Updates
Updates to product firmware may result in
changes not described in the manual. For more
information, visit:
http://www.fujifilm.com/support/digital_cameras/
software
fujifilm firmware
Checking the Firmware Version
O The camera will only display the firmware version if a
memory card is inserted.
Turn the camera off and check that a memory
card is inserted.
Turn the camera on while pressing the DISP/BACK
button. The current firmware version will be displayed; check the firmware version.
Turn the camera off.
N To view the firmware version or update firmware for
optional accessories such as interchangeable lenses,
shoe-mounted flash units, and mount adapters, mount
the accessories on the camera.
315
Technical Notes
12
Troubleshooting
Consult the table below should you encounter
problems using your camera. If you don’t find
the solution here, contact your local FUJIFILM
distributor.
Power and Battery
Problem
Solution
• The battery is exhausted: Charge the battery or insert
Technical Notes
12
a fully-charged spare battery (P 32).
The camera does • The battery is inserted incorrectly: Reinsert in the
correct orientation (P 37).
not turn on.
• The battery-chamber cover is not latched: Latch the
battery-chamber cover (P 38).
The monitor
The monitor may not turn on if the camera is turned
does not turn off and then on again very quickly. Keep the shutter
on.
button pressed halfway until the monitor activates.
• The battery is cold: Warm the battery by placing it
in a pocket or other warm place and reinsert it in
the camera immediately before taking a picture.
• There is dirt on the battery terminals: Clean the terThe battery runs minals with a soft, dry cloth.
down quickly. • ON is selected for G AF/MF SETTING > PRE-AF:
Turn PRE-AF off (P 137).
• The battery has been charged many times: The battery
has reached the end of its charging life. Purchase
a new battery.
316
Troubleshooting
Problem
Solution
The camera turns The battery is exhausted: Charge the battery or insert a
fully-charged spare battery (P 32).
off suddenly.
Reinsert the battery in the correct orientation
Charging does
and make sure that the charger is plugged in
not start.
(P 32).
Charging is slow. Charge the battery at room temperature.
• There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.
The charging
lamp blinks, but • The battery has been charged many times: The battery
the battery does has reached the end of its charging life. Purchase
a new battery. If the battery still fails to charge,
not charge.
contact your FUJIFILM dealer (P 294).
Menus and Displays
Problem
Solution
Display is not in Select ENGLISH for D USER SETTING >
English.
a (P 46, 206).
Solution
• The memory card is full: Insert a new memory card
or delete pictures (P 36, 183).
No picture is
taken when the • The memory card is not formatted: Format the memshutter button is ory card (P 203).
pressed.
• There is dirt on the memory card contacts: Clean the
contacts with a soft, dry cloth.
317
Technical Notes
Shooting
Problem
12
Problem
Solution
• The memory card is damaged: Insert a new memory
card (P 36).
No picture is
taken when the
shutter button
is pressed
(continued).
• The battery is exhausted: Charge the battery or insert
a fully-charged spare battery (P 32).
• The camera has turned off automatically: Turn the
camera on (P 42).
• You are using a third-party mount adapter: Select ON
for SHOOT WITHOUT LENS (P 230).
• The indicator lamp was orange when you attempted to
record a panorama: Wait until the indicator lamps
turns off (P 10).
Technical Notes
Mottling (“noise”)
Gain is increased to aid composition when the
appears in the
subject is poorly lit and aperture is stopped down,
monitor or viewwhich may result in noticeable mottling when imfinder when the
ages are previewed in the displays. Images taken
shutter button is
with the camera are unaffected.
pressed halfway.
The camera does The subject is not suited to autofocus: Use focus lock or
not focus.
manual focus (P 92).
12
318
Troubleshooting
Problem
Technical Notes
Solution
• The subject’s face is obscured by sunglasses, a hat,
long hair, or other objects: Remove the obstructions
(P 139).
• The subject’s face occupies only a small area of the frame:
Change the composition so that the subject’s face
No face is
occupies a larger area of the frame (P 139).
detected.
• The subject’s head is tilted or horizontal: Ask the subject to hold their head straight (P 139).
• The camera is tilted: Keep the camera level.
• The subject’s face is poorly lit: Shoot in bright light.
The selected subject is closer to the center of the
Wrong subject is frame than the main subject. Recompose the picselected.
ture or turn face detection off and frame the picture
using focus lock (P 92).
• The flash is disabled: Adjust settings (P 107).
• The flash is lowered: Raise the flash (P 107).
The flash does • The battery is exhausted: Charge the battery or insert
a fully-charged spare battery (P 32).
not fire.
• The camera is in bracketing or continuous mode:
Select single frame mode (P 6).
12
319
Problem
Solution
• The subject is not in range of the flash: Position the
The flash does
not fully light
the subject.
subject in range of the flash.
• The flash window is obstructed: Hold the camera
correctly.
• Shutter speed is faster than the sync speed: Choose a
slower shutter speed (P 64, 72).
Pictures are
blurred.
Pictures are
mottled.
Technical Notes
12
320
• The lens is dirty: Clean the lens (P 280).
• The lens is blocked: Keep objects away from the lens
(P 49).
• s is displayed during shooting and the focus frame
is displayed in red: Check focus before shooting
(P 50).
• Shutter speed is slow and the ambient temperature is
high: This is normal and does not indicate a malfunction.
• Pixel mapping is required: Perform pixel mapping
using H IMAGE QUALITY SETTING > PIXEL
MAPPING (P 130).
• The camera has been used continuously at high temperatures or a temperature warning is displayed:
Turn the camera off and wait for it to cool down
(P 42).
Troubleshooting
Playback
Problem
Solution
Pictures are
The pictures were taken with a different make or
grainy.
model of camera.
Playback zoom is The pictures were created using RESIZE or with a
unavailable.
different make or model of camera.
• Playback volume is too low: Adjust playback volume
(P 213).
No sound in
• The microphone was obstructed: Hold the camera
movie playback. correctly during recording.
• The speaker is obstructed: Hold the camera correctly
during playback.
Some of the pictures selected for deletion are proSelected pictures
tected. Remove protection using the device with
are not deleted.
which it was originally applied (P 188).
File numbering The battery-chamber cover was opened while the
is unexpectedly camera was on. Turn the camera off before opening
reset.
the battery-chamber cover (P 237).
Technical Notes
12
321
Connections
Problem
Technical Notes
Solution
The camera is connected to a TV: Pictures will be disThe monitor is
played on the TV instead of in the camera monitor
blank.
(P 282).
• The camera is not properly connected: Connect the
camera properly (P 282).
No picture or
• Input on the television is set to “TV”: Set input to “HDMI”
(P 282).
sound on TV.
• The volume on the TV is too low: Use the controls on
the television to adjust the volume.
The display mode selected with the VIEW MODE button
Both the TV and
is EVF ONLY + E: Put your eye to the viewndcamera monitor
er or use the VIEW MODE button to choose another
are blank.
display mode.
The computer
Be sure the camera and computer are correctly condoes not recognected (P 287).
nize the camera.
Cannot transfer
Use MyFinePix Studio to transfer pictures (Windows
RAW or JPEG files
only; P 287).
to computer.
12
322
Troubleshooting
Wireless Transfer
For additional information on troubleshooting wireless connections, visit:
http://digital-cameras.support.fujifilm.com/app?pid=x
Problem
Problem
connecting
or uploading
pictures to
smartphone.
Solution
• The smartphone is too far away: Move the devices
closer (P 284).
• Nearby devices are causing radio interference: Move
323
Technical Notes
the camera and smartphone away from microwave ovens or cordless phones (P 284).
• The smartphone is connected to another device: The
smartphone and camera can connect to only one
device at a time. End the connection and try again
(P 284).
Cannot upload • There are several smartphones in the vicinity: Try connecting again. The presence of multiple smartimages.
phones can make connection dicult (P 284).
• The current image is a movie or was created on
another device and cannot be uploaded to a
smartphone (P 284).
Select ON for RESIZE IMAGE FOR
Smartphone
SMARTPHONE H. Selecting OFF increases
will not display upload times for larger images; in addition, some
pictures.
phones may not display images over a certain size
(P 243).
12
Troubleshooting
Miscellaneous
Problem
Solution
• Temporary camera malfunction: Remove and reinThe camera is
unresponsive.
sert the battery (P 36).
• The battery is exhausted: Charge the battery or insert
a fully-charged spare battery (P 32).
• The camera is connected to a wireless LAN: End the
connection.
The camera does
Remove and reinsert the battery (P 36). If the
not function as
problem persists, contact your FUJIFILM dealer.
expected.
No sound.
Adjust the volume (P 210).
Pressing the
Q button does
TTL-LOCK is active: End TTL-LOCK (P 255).
not display the
quick menu.
Technical Notes
12
324
Warning Messages and Displays
The following warnings appear in the display.
Warning
325
Technical Notes
Description
Low battery. Charge the battery or insert a fuli (red)
ly-charged spare battery.
Battery exhausted. Charge the battery or insert a
j (blinks red)
fully-charged spare battery.
s (displayed in The camera cannot focus. Use focus lock to focus
red with red focus on another subject at the same distance, then reframe)
compose the picture.
The subject is too bright or too dark and the picAperture or
ture will be over- or under-exposed. Use the flash
shutter speed
for additional lighting when taking photographs of
displayed in red
poorly-lit subject.
FOCUS ERROR
LENS CONTROL Camera malfunction. Turn the camera off and
ERROR
then on again. If the message persists, contact a
TURN OFF THE
CAMERA AND FUJIFILM dealer.
TURN ON AGAIN
The shutter can only be released when a memory
NO CARD
card is inserted. Insert a memory card.
• The memory card is not formatted or the memory card has
been formatted in a computer or other device: Format
CARD NOT
INITIALIZED
the memory card using D USER SETTING >
FORMAT.
12
Warning
Description
• The memory card contacts require cleaning: Clean the
contacts with a soft, dry cloth. If the message is
repeated, format the card. If the message persists,
replace the card.
• Camera malfunction: Contact a FUJIFILM dealer.
Turn the camera off, remove the lens, and clean the
mounting surfaces, then replace the lens and turn
LENS ERROR
the camera on. If the problem persists, contact a
FUJIFILM dealer.
• The memory card is not formatted for use in the camera: Format the card.
• The memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry
CARD ERROR
cloth. If the message is repeated, format the card.
If the message persists, replace the card.
• Incompatible memory card: Use a compatible card.
• Camera malfunction: Contact a FUJIFILM dealer.
PROTECTED CARD The memory card is locked. Unlock the card.
The memory card is incorrectly formatted. Use the
BUSY
camera to format the card.
The memory card is full and pictures cannot be
b MEMORY FULL recorded. Delete pictures or insert a memory card
with more free space.
• Memory card error or connection error: Reinsert the
card or turn the camera off and then on again. If
WRITE ERROR
the message persists, contact a FUJIFILM dealer.
CARD NOT
INITIALIZED
(continued)
Technical Notes
12
326
Warning Messages and Displays
Warning
Description
• Not enough memory remaining to record additional
pictures: Delete pictures or insert a memory card
with more free space.
• The memory card is not formatted: Format the memory card.
The camera has run out of frame numbers (current frame number is 999-9999). Insert a formatted memory card and select RENEW for D SAVE
FRAME NO. FULL
DATA SET-UP > FRAME NO.. Take a picture to
reset frame numbering to 100-0001, then select
CONTINUOUS for FRAME NO..
• The file is corrupt or was not created with the camera:
The le cannot be viewed.
• The memory card contacts require cleaning: Clean the
contacts with a soft, dry cloth. If the message is
READ ERROR
repeated, format the card. If the message persists,
replace the card.
• Camera malfunction: Contact a FUJIFILM dealer.
An attempt was made to delete or rotate to a proPROTECTED
FRAME
tected picture. Remove protection and try again.
The picture is damaged or was not created with the
CAN NOT CROP
camera.
Print orders can contain no more than 999 pictures.
DPOF FILE ERROR Copy any additional pictures you wish to print to another memory card and create a second print order.
CAN NOT ROTATE The selected picture cannot be rotated.
WRITE ERROR
(continued)
Technical Notes
327
12
Warning Messages and Displays
Technical Notes
Warning
Description
F CAN NOT
Movies cannot be rotated.
ROTATE
CAN NOT SET DPOF The picture cannot be printed using DPOF.
F CAN NOT SET Movies cannot be printed using DPOF.
DPOF
F CANNOT
Red-eye removal cannot be applied to movies.
EXECUTE
Red-eye removal cannot be applied to pictures crem CANNOT
ated with other devices.
EXECUTE
MISMATCH:
4K MODE AND The movie mode selected with the camera is not
EXTERNAL
compatible with the device to which the camera is
MONITOR
connected via HDMI. Try selecting a different movie
CHANGE MOVIE mode.
MODE
Turn the camera off and wait for it to cool. Mottling
p (yellow)
may increase in pictures taken when this warning
is displayed.
Turn the camera off and wait for it to cool. While
this warning is displayed, movies cannot be rep (red)
corded, mottling may increase, and performance,
including frame advance rate and display quality,
may drop.
12
328
Memory Card Capacity
The following table shows the recording time
or number of pictures available at different
image sizes. All figures are approximate; file
size varies with the scene recorded, producing
wide variations in the number of files that can
be stored. The number of exposures or length
remaining may not diminish at an even rate.
8 GB
16 GB
FINE NORMAL FINE NORMAL
540 800 1110 1660
RAW (UNCOMPRESSED)
150
320
RAW (LOSSLESS COMPRESSED)
310
640
9 minutes
20 minutes
U2160/29.97P, 25P, 24P, 23.98P 2
52 minutes
i1080/59.94P, 50P, 29.97P, 25P, 24P, 23.98P 3 26 minutes
h720/59.94P, 50P, 29.97P, 25P, 24P, 23.98P 4 51 minutes 103 minutes
Capacity
Photos
O 3∜2
Movies 1
O Although movie recording will continue without interruption
when the file size reaches 4 GB, subsequent footage will be
recorded to a separate file which must be viewed separately.
329
Technical Notes
1 Use a UHS speed class 3 card or better.
2 Individual movies cannot exceed 10 minutes in length, or 30 minutes if lmed using a power booster grip.
3 Individual movies cannot exceed 15 minutes in length, or 30 minutes if lmed using a power booster grip.
4 Individual movies cannot exceed 30 minutes in length.
12
Specifications
System
Model
Product Number
Effective pixels
Image sensor
Storage media
Memory card slot
File system
File format
Technical Notes
Image size
12 Lens mount
330
FUJIFILM X-E3
FF170001
Approx. 24.3 million
23.5 mm × 15.6 mm (APS-C), X-Trans CMOS III
sensor with primary color lter
FUJIFILM-recommended SD/SDHC/SDXC
memory cards
SD memory card slot (UHS-1)
Compliant with Design Rule for Camera File
System (DCF), Exif 2.3, and Digital Print Order
Format (DPOF)
• Still pictures: Exif 2.3 JPEG (compressed); RAW
(original RAF format, uncompressed or compressed using a lossless algorithm; special purpose software required); RAW+JPEG available
• Movies: H.264 standard with stereo sound (MOV)
• Voice memo: Stereo (WAVE)
O3∶2 (6000 × 4000) O16∶9 (6000 × 3376) O1∶1 (4000 × 4000)
P3∶2 (4240 × 2832) P16∶9 (4240 × 2384) P1∶1 (2832 × 2832)
Q3∶2 (3008 × 2000) Q16∶9 (3008 × 1688) Q1∶1 (2000 × 2000)
RAW (6000 × 4000)
O panorama: vertical (2160 × 9600)/horizontal (9600 × 1440)
P panorama: vertical (2160 × 6400)/horizontal (6400 × 1440)
FUJIFILM X mount
Specifications
System
Sensitivity
• Still pictures: Standard output sensitivity equiv-
alent to ISO 200 – 12800 in increments of ⁄ EV;
AUTO; extended output sensitivity equivalent
to ISO 100, 125, 160, 25600, or 51200
• Movies: Standard output sensitivity equivalent
to ISO 200 – 12800 in increments of ⁄ EV; AUTO
Metering
256-segment through-the-lens (TTL) metering;
MULTI, SPOT, AVERAGE, CENTER WEIGHTED
Exposure control
Programmed AE (with program shift); shutter-priority AE; aperture-priority AE; manual exposure
Exposure compensation • Still pictures: −5 EV – +5 EV in increments of ⁄ EV
• Movies: −2 EV–+2 EV in increments of ⁄ EV
Shutter speed
Modes S
Mechanical shutter
Electronic shutter
Mode A
30 s to
¼ s
30 s to
⁄ s
30 s to
⁄ s
and M
Bulb
15 min. to
Max. 60 min.
¼ s
15 min. to
Fixed at 1 s
⁄ s
15 min. to
Max. 60 min.
⁄ s
Technical Notes
Mechanical+
electronic
Mode P
4 s to
¼ s
4 s to
⁄ s
4 s to
⁄ s
12
331
System
Continuous
Frame rate (JPEG)
Frames per burst
14 fps *
Up to approximately 35
11 fps*
Up to approximately 50
8.0 fps
Up to approximately 53
5.0 fps
Up to approximately 56
4.0 fps
Up to approximately 58
3.0 fps
Up to approximately 62
* Available with electronic shutter only.
The frame rate varies with shooting conditions and the
number of images recorded. In addition, the frame rate
and number of frames per burst may vary depending
on the type of memory card used.
Focus
• Mode: Single or continuous AF; manual focus
with focus ring
selection: SINGLE POINT, ZONE,
WIDE/TRACKING, ALL
• Autofocus system: Intelligent hybrid AF (TTL
contrast-detect/phase-detection AF) with
AF-assist illuminator
Custom 1, Custom 2, Custom 3, color temperature selection, auto, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool
white fluorescent, incandescent, underwater
Off, 2 sec., 10 sec.
• Focus-area
Technical Notes
White balance
12 Self-timer
332
Specifications
System
Flash mode
• MODE: TTL MODE (FLASH AUTO, STANDARD,
SLOW SYNC.), MANUAL, COMMANDER, OFF
• SYNC. MODE: 1ST CURTAIN, 2ND CURTAIN
• RED EYE REMOVAL: e FLASH+REMOVAL,
L FLASH, d REMOVAL, OFF
Accessory shoe with TTL contacts
X contact; supports sync speeds as fast as ⁄ s
0.39-in., 2,360k-dot color OLED viewnder
with diopter adjustment (−4 to +2 m−1); magnification 0.62× with 50 mm lens (35 mm format equivalent) at infinity and diopter set to
−1.0 m−1; diagonal angle of view approximately 30.0° (horizontal angle of view approximately
25.0°); eye point approx. 17.5 mm
LCD monitor
Fixed 3.0-in/7.6 cm, 1040k-dot color touchscreen LCD monitor
U 2160/29.97P i 1080/59.94P h 720/59.94P
Movies
(with stereo sound) U 2160/25P i 1080/50P h 720/50P
U 2160/24P i 1080/29.97P h 720/29.97P
U 2160/23.98P i 1080/25P h 720/25P
i 1080/24P h 720/24P
i 1080/23.98P h 720/23.98P
Hot shoe
Sync contact
Viewfinder
Technical Notes
12
333
Input/output terminals
Digital input/output USB 2.0 High-Speed
Micro USB connector (Micro-B)
HDMI output
HDMI Micro connector (Type D)
Microphone/remote ⌀2.5 mm 3-pole mini jack
release connector
Power supply/other
Power supply
NP-W126S rechargeable battery (supplied with
camera)
Camera size
121.3 mm × 73.9 mm × 42.7 mm (32.4 mm
(W × H × D)
excluding projections, measured at thinnest part)/
4.78 in. × 2.91 in. × 1.68 in. (1.28 in.)
Camera weight
Approx. 287 g/10.1 oz., excluding battery,
accessories, and memory card
Shooting weight Approx. 337 g/11.9 oz., including battery and
memory card
Operating conditions • Temperature: 0 °C to +40 °C/
+32 °F to +104 °F
• Humidity: 10% to 80% (no condensation)
Technical Notes
12
334
Specifications
Power supply/other
Battery life
• Battery type: NP-W126S
• Photographs: The number
of frames varies
with the option selected for PERFORMANCE:
PERFORMANCE
LCD
EVF
HIGH PERFORMANCE Approx. 260 Approx. 260
STANDARD
Approx. 350 Approx. 350
• Movies: The length of footage that can be recorded varies with the movie mode:
Continuance
Actual Battery life Battery life of
Mode of movie capture movie capture
U Approx. 50 minutes Approx. 70 minutes
i Approx. 60 minutes Approx. 95 minutes
CIPA standard, measured in mode P, using fully
charged battery (NP-W126S), XF35mmF1.4 R
lens, and SD memory card.
Note: Battery life varies with battery charge level and will decline at low temperatures.
Technical Notes
12
335
Wireless transmitter
Wireless LAN
Standards
IEEE 802.11b/g/n (standard wireless protocol)
Operating frequency • U. S. A., Canada, Taiwan: 2,412 MHz–2,462 MHz
(center frequency)
(11 channels)
• Other countries: 2,412 MHz–2,472 MHz (13
channels)
Access protocols
Infrastructure
BluetoothÂŽ
Standards
Bluetooth version 4.0 (Bluetooth Low Energy)
Operating frequency 2,402 MHz–2,480 MHz
(center frequency)
EF-X8 shoe-mounted flash unit
Guide number
GN8 (ISO100), GN11 (ISO200)
Dimensions
39.7 mm × 24.2 mm × 63.4 mm/
1.6 in. × 1.0 in. × 2.5 in.
(W × H × D)
Weight
Approx. 41 g/1.4 oz.
Technical Notes
12
NP-W126S rechargeable battery
Nominal voltage
7.2 V
Nominal capacity
1260 mAh
Operating
0 °C to +40 °C/
temperature
+32 °F to +104 °F
Dimensions
36.4 mm × 47.1 mm × 15.7 mm/
1.4 in. × 1.9 in. × 0.6 in.
(W × H × D)
Weight
Approx. 47 g/1.7 oz.
336
Specifications
BC-W126 battery charger
Rated input
100 V – 240 V AC, 50/60 Hz
Input capacity
13 –21 VA
Rated output
8.4 V DC, 0.6 A
Supported batteries NP-W126S rechargeable batteries
Charging time
Approx. 150 minutes (+20 °C/+68 °F)
Operating
5 °C to +40 °C/
temperature
+41 °F to +104 °F
Dimensions
65 mm × 91.5 mm × 28 mm/
2.6 in. × 3.6 in. × 1.1 in., excluding projections
(W × H × D)
Weight
Approx. 77 g/2.7 oz.
Weight and dimensions vary with the country or region of sale.
Labels, menus, and other displays may differ from those on the
actual camera.
O Specifications and performance are subject to change
without notice. FUJIFILM will not be held liable for any
errors this manual may contain. The appearance of the
product may differ from that described in this manual.
Technical Notes
12
337
MEMO
338
MEMO
339
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : S01-15
Title                           : $00 LX23_OM_200-EN_01.indb
Create Date                     : 2017:07:25 13:55:50+09:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Modify Date                     : 2017:07:25 13:55:50+09:00
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:1b11d0fb-18f0-496e-8fad-3a5a120c83dc
Instance ID                     : uuid:d894cb4a-b5ea-4142-a399-3190ec215675
Page Count                      : 360
Author                          : S01-15
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W2Z-02000004

Navigation menu