Fujitsu FOMA-F906I Part 15 Low Power Communication Device Transmitter User Manual F906i

Download:
Mirror Download [FCC.gov]
Document ID	946663
Application ID	7X917yHjoTLz03C91pevGQ==
Document Description	manual 7
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	194.94kB (2436741 bits)
Date Submitted	2008-05-27 00:00:00
Date Available	2008-05-27 00:00:00
Creation Date	2008-05-23 13:59:20
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2008-05-23 13:59:30
Document Title	F906i.book
Document Creator	PScript5.dll Version 5.2
Document Author:	DocMaker

F906i_E1kou
F906i.book
Page 250
Monday, April 21, 2008
10:59 PM
◆ Locking only a specified IC card function 
◆ Automatically deactivating IC card lock at specified
time 
You can set so that, when activating IC card lock, only the IC card function for
Osaifu-Keitai compatible i-αppli previously specified is locked (Individual IC card
lock).
You can set to make the IC card available only in the specified period of time in IC
card lock.
･ Up to 7 items can be registered.
･ This function operates only while the power is ON.
1 m [Osaifu-Keitai] 42
the Osaifu-Keitai compatible i-αpplieC
2 2eSelect
Locking all IC card functions : 1
✔INFORMATION
･ For selected Osaifu-Keitai compatible i-αppli, appears on IC card content.→P225
･ The selecting targets are Osaifu-Keitai compatible i-αppli that the service is already
[Osaifu-Keitai] 44eAuthenticatee1-7
1m
Setting/Canceling : Place the cursor on the title and m
･
the required itemseC
2 Set
Time : Enter the start time and end time (it can be set to the following day over
24 o'clock) to deactivate IC card lock.
Repeat : When "Day of week" is selected, select "Day/Week", select a day of
the week and press C.
Title : Up to 9 two-byte (18 one-byte) characters can be entered.
registered in the IC card and the service is available.
◆ Automatically activating IC card lock 
You can set to activate IC card lock automatically after the specified time has
elapsed.
m [Osaifu-Keitai] 43eSet the required itemseC
✔INFORMATION
･ If the power is turned OFF manually or due to exhaustion of the battery while this
･
function is "ON", IC card lock is activated before the specified time.
When locking time comes while using Osaifu-Keitai compatible i-αppli, IC card lock is
activated upon termination of Osaifu-Keitai compatible i-αppli.
appears at the left of the title for the Programed activation set to ON.
✔INFORMATION
･ When the end time for deactivating IC card lock comes while using Osaifu-Keitai
･
compatible i-αppli, IC card lock is activated upon termination of Osaifu-Keitai
compatible i-αppli.
IC card lock can be started in the period for which IC card lock is deactivated, but
cannot be automatically activated by Timed lock.
◆ Locking IC card functions when power is turned OFF

You can select if you continue the IC card lock state before turning the power OFF
or lock all IC card functions.
1 m [Osaifu-Keitai] 45eAuthenticatee1 or 2
250
Osaifu-Keitai/ToruCa
F906i_E1kou
F906i.book
Page 251
Monday, April 21, 2008
10:59 PM
GPS Function
Using GPS Function ............................................................................................................................................................
Checking your current location ............................................................................................................ Position location
Using GPS compatible i-αppli ............................................................................................................................................
Providing your current location information when requested ......................................................... Location request
Notifying your current location information .......................................................................................... Notify location
Displaying histories of location information checked ................................................................................. Loc. history
Setting GPS ..........................................................................................................................................................................
252
252
254
259
263
264
265
251
F906i_E1kou
F906i.book
Page 252
Monday, April 21, 2008
10:59 PM
Position location
Using GPS Function
･ This function is unavailable as a navigation device for aircraft, vehicles or
･
･
･
･
persons or as high-precision location surveying GPS. DoCoMo is not liable to
any purely economic damages including troubles, if any, caused by missing
opportunities of viewing positioning results or making communications due to
failures or malfunctions of FOMA terminal or external events such as power
interruption (including battery exhaustion) in using FOMA terminal for
purposes including but not limited to the above.
Because GPS is managed by U.S. Department of Defense, GPS wave conditions
may be controlled (accuracy degraded or wave stopped) for security reasons of
the U.S. And, wave conditions differ by satellite locations; therefore, positioning
operations in the same location under the same environmental conditions may
not yield the same result.
GPS uses waves transmitted from satellites and it may be disabled or become
hard to receive waves in the conditions below, causing to have an error of 300
m or more in location information.
- Under or inside forest, on street of large buildings or in an area packed with many houses
- Inside or beneath a building
- Underground, in a tunnel or underwater
- Near a high-voltage cable
- Inside an automobile, train, etc.
- Bad weather such as heavy rain or snow
- Covered with hand etc., or placed in a bag etc.
- FOMA terminal closed
- FOMA terminal surrounded by obstacles or persons
When using Location request and Notify location functions, check instructions
and precautions given in website of GPS service providers and DoCoMo. And,
you may be charged for using these functions.
The GPS function except Position location is not available in out of service area
or overseas.
Checking your current location
･ No packet communication fee applies for Position location. Note that a packet
communication fee is required separately with map displayed using location
information.
･ Positioning is unavailable while positioning with Location request or Notify
location.
･ Even out of service area or overseas, positioning may be enabled in a location
with a wide view, but it may function abnormally, e.g., taking long time or
positioning disabled under certain environmental conditions.
[LifeKit] 71
1m
Positioning starts and the light turns on.
Blinking when positioning
Approximate time elapsed in positioning
Accuracy
･ Accuracy icon definitions.
★★★ : Nearly accurate location information (with an error of less than 50
m)
★★☆ : Comparatively accurate location information (with an error of less
than 300 m)
★☆☆ : Approximate location information (with an error of 300 m or more)
Accuracy is merely approximate indication. Actual accuracy may vary by
the environmental wave and other conditions.
･ When positioning, press c or f to stop it.
･ To use the location information currently acquired, press C.
a function from Use location info menu after positioning
2 Select
Operating Use location info menu→P253 "■Use location menu"
252
GPS Function
F906i_E1kou
F906i.book
Page 253
Monday, April 21, 2008
10:59 PM
✔INFORMATION
･ A message may appear indicating that positioning takes time. Select "Yes" to
continue positioning which takes time. Select "Retry" to retry positioning in Quality
mode regardless of the setting of the positioning mode. "Retry" does not appear when
using overseas.
◆ Using location information
■ Use location menu
This menu appears after performing Position location, selecting "Use location"
from the submenu of Loc. history, selecting "Detail info"→"Use location" from the
submenu in displaying image or selecting the location information on the details
screen of phonebook or User information.
the menu screen, 1-7
1 On
Read map : 1e"OK"
Connect to a map site and display a map using Location information. After a
map appears, you can check periphery information using i-area. For details on
i-area, refer to the DoCoMo website.
Run i-αppli : 2eSelect i-αppli
i-αppli starts.
Paste to a mail : 3
A mail creation screen with a Location information in the form of URL entered
in the mail message is displayed.
･ When mail creation screen is displayed from Position location or Loc.
history, "位置メール (Location mail)" is entered in the subject field.
･ This is unavailable when 2in1 is ON in B mode.
･ A Location information URL pasted to a mail can be displayed only on imode compatible terminals.
Add to phonebook : 4
A new phonebook entry screen is displayed.
Update phonebook : 5eSelect phonebook entry to update
Location information is added to the selected phonebook entry and an entry
screen is displayed.
Adding to image : 6eSelect a foldereSelect an imagee"Yes"
Checking location information : 7
Display the screen shown below.
Date and time of positioning
Current location*
Indicate World Geodetic System (WGS84) or Tokyo
Datum (Tokyo), whichever used for positioning.
Accuracy
* The information is shown in degrees (°), minutes (′), and seconds (″). "N", "S", "E" and
"W" indicate a north latitude, south latitude, east longitude and west longitude,
respectively.
■ Paste/Attach/Send location menu
Displayed for pasting/attaching/sending Location information of individual items
in the cases below.
Paste location menu : Selecting "Quote phrase/passw"→"Paste location" after
pressing m while entering message text or editing a signature
Attach location menu : When Selecting "Location info" on the new data entry, data
edit or User information edit screen of FOMA terminal phonebook, when
pressing m while displaying image to select "Detail info"→"Attach location",
or when pressing m on the screen after shooting still image to select "Attach
location"
Send location info menu : Selecting a link item for sending location information
from i-mode or ToruCa
Paste/Attach/Send location menu, 1-5
1 From
Using Location information of Position location : 1e"Yes" from
confirmation screen after activating Position location
Using Location information of Loc. history : 2eSelect Loc.
historye"Yes"
GPS Function
253
F906i_E1kou
F906i.book
Page 254
Monday, April 21, 2008
10:59 PM
Using Location information of phonebook : 3eSelect a phonebook entry
from FOMA terminal phonebook list with Location information
enterede"Yes"
Using Location information of User information :
4eAuthenticatee"Yes"
Using Location information entered to an image : 5eSelect a
foldereSelect an imagee"Yes"
◆ Setting actions to be taken after Position location

Set actions after Position location when pressing 8 for 1 second or more on
stand-by display (the setting of Shortcut menu in default state) or starting Position
location from Shortcut icons.
･ It is also applicable when Custom menu settings are changed and Position
location is assigned to another keypad (the first level).
[LifeKit] 741e1-6
1m
Read map : Connect to a map site and display a map based on the positioned
location information.
Run i-αppli : Display a list of GPS compatible i-αppli.
Paste to mail : A mail creation screen appears, with "位置メール (Location
mail)" entered in the subject field, and with a Location information in the
form of URL entered in the message text.
Add to phonebook : Display a screen for selecting "Add to phonebook" or
"Update phonebook". You can add new phonebook entry with location
information set or update location information to an existing phonebook
entry.
Add to image : Display image folder list. Positioned location information can
be added to an image.
Confirm each time : Display accuracy and location information menu.→P253
Using GPS compatible i-αppli
･ Using GPS compatible i-αppli sends location information to the Information
Provider of the i-αppli to be used.
254
GPS Function
･ When using the GPS function with GPS compatible i-αppli, "Location usage
setting" of i-αppli to be used must be set to "Yes".
･ "地図アプリ (Map application)" and "モバイルGoogleマップ (Mobile Google
map)" are stored by default as GPS compatible i-αppli.
[LifeKit] 72eSelect GPS compatible i-αppli to start
1m
･ To exit GPS compatible i-αppli, use the procedure specified for each iαppli.
◆ Using 地図アプリ (Map application)
By the preinstalled "地図アプリ", using GPS function and map, you can look up
your current location or the map of specified place, search information around the
place, perform navigation to the destination by vehicle, on foot or by car.
･ A packet communication fee is required separately. It is recommended to use
Pake-Houdai or Pake-Houdai full for this software.
･ In case of deleting it, you can download it from "ｉエリア−周辺情報− (i-area Peripheral information -)" site.
･ It is unavailable with 2in1 ON in B mode.
･ DoCoMo gives no assurances of accuracy, immediacy, etc. of the map or routing
information. Please be forewarned.
･ Make sure that other than the driver operate this software while driving.
･ The display shown here is an example. Screens are given only for information
purposes and may differ from actual displays.
❖ Basic services and additional services
There are 2 services below for this software.
Basic service : The services DoCoMo offers without charge.
Additional service : The services ZENRIN DataCom offers with charge.
･ You can use all functions except traffic information free of charge till 90th days
from the first activation. To use the additional services on or after the 91st day,
you are required to subscribe (charged) to "ゼンリン 地図＋ナビ" provided by
ZENRIN DataCom.
･ If you subscribe to this software after you start using it, you do not need to
download the software again. You can use this software without modification.
F906i_E1kou
F906i.book
Page 255
Monday, April 21, 2008
10:59 PM
■ Service contents (Menu)
Menu
Map
Menu
Description
･ By using GPS function, read map by entering your
･
On or after
the 91st day
Extra
･ Check the map of the places you registered in this
･
･
Charged
software, server or phonebook, or places you searched
before.
と" data saved in microSD card to the map application
server.
shared with PC.
･ Search information of shops, facilities or iD-accepting Free
･
･
Navigation
stores at your current location or around the specified
place, and obtain coupons from Gourmet information.
Confirm the parking availability information around the
place.
By entering in a voice, you can search the peripheral
information easily.
･ Perform the total navigation to the destination by
various types of maps such as a map moving by
declining FOMA terminal, a 3D map, a map
emphasizing railroads, etc.
Using GPS function, leave your footprint on the current
position, and view the trail of your movement.
Paint and display the map of the city/village you have
positioned before by GPS function on a prefectural
basis.
･ Check 足あと (footprints) also on a PC by sending "足あ Charged
･ If you save a place in the server, the saved place is
Local Search
･ Change the mode to not only a usual map, but also to Free
Free
current location, free word, address phone number or
other information.
By entering address in a voice, you can see the map
easily.
On or after
the 91st day
Description
･ Back up the areas you have positioned before using
GPS function to the server.
Emergency
･ Search the facilities helpful in case of disaster.
Charged
･ A communication-free i-αppli linked to map application
Setting/Help
･ Check settings or usage of map display or navigation Free
for disaster.
Charged
display.
vehicle, on foot or by car altogether.
Perform navigation easily to your registered home.
Transfer
･
･ Check transfer information or timetable of the railway Charged
system.
･ Check railway route on the map, and set the alarm
before departure.
･ By entering in a voice, you can get transfer information
easily.
GPS Function
255
F906i_E1kou
F906i.book
Page 256
Monday, April 21, 2008
10:59 PM
❖ Menu and operation of "地図アプリ (Map application)" Top
screen
❖ Map screen and operation
Menus appear on the TOP screen. If you close a menu by c, the map previously
displayed appears.
･ At the first time you use this application, the Terms of Service and the
instructions for use appear.
©2008 ZENRIN DataCom
Map display screen
･ The operations below are available on the map display screen.
TOP screen
■ In case 91 days passed without subscription
When you use this application for the first time on or after the 91st day, a message
indicating that the usable functions are limited and the inquiry message for
subscription appear. Also, when you select an additional service menu, similar
messages appear.
･ Access the site of "ゼンリン 地図＋ナビ" from this software when subscribing.
256
GPS Function
m : Display of TOP screen
C : Display of magnifying/shrinking bar (Wide display by u, and detail map
display by d)
g : Display of the quick access menu
k : Scroll the map on the left, right, up and down
c : Close the menu Return to the first search result
* : Rotate the map counterclockwise
0 : Display the map with the north upward
# : Rotate the map clockwise
･ The operations below are available by the quick access menu.
u : Search the peripheral information centering around the point on the
displayed map
d : Search the route to the center of the displayed map by setting the starting
point.
l : Send the URL of the displayed map by mail
r : Register the location information of the center of the map to this software,
the server or phonebook (If registered in the server, you can share the
registered point with PC)
g : Close the quick access menu
1 : Display the point you can view the 3D crossing or the panorama image
(3D crossing or panorama image is displayed by selecting a point)
F906i_E1kou
F906i.book
Page 257
Monday, April 21, 2008
10:59 PM
2 : Display of the buildings existing in the peripheral area (Check the
information by selecting the point)
❖ Screen and operation of the search result of the peripheral
information
･ These are the screen and operation for the case that the search result is
displayed by a map, not for the case they are selected on the list.
©2008 ZENRIN DataCom
Search result screen of peripheral information
･ The operations below are available on the search result screen.
g : Check the detail information of the search result (When search result is not
selected, display of the quick access menu)
5 : Search again centering around the displayed point
4 : Select the previous search result
6 : Select the next search result
m/C/k/*/0/# : The same operations as the Map display screen
❖ Guide (navigation) to the destination by voice and display
by searching route
Search the route by setting the starting point and the destination. Display the route
on foot, by public transportation system and by car. After searching the route,
guide (navigation) to the destination by voice and display.
1 On the TOP screen, "ナビ (Navigation)"e"ナビをする (Navigate)"
出発地 (Starting point) fieldeSet starting point from each
2 Select
item
現在地 (Current position) (GPS) : Position and set the current position
フリーワード検索 (Free word search) : Search by keyword and set
地図上で指定 (Plot on the map) : Set the starting point on the map
TEL／〒検索 (Phone number/〒(Postal code) search) : Search by phone
number or postal code and set
住所一覧から (From address list) : Select and set the address
ジャンルから (From category) : Select the category and set
履歴から (From history) : Set from the map displayed before
登録地点から (From registered point) : Set from the location information
saved in this software, the server or phonebook
自宅 (Home) : Set the location information of your home
出発地の確認 (Check the starting point) : Check the information of the starting
point
目的地 (Destination) fieldeSet destination from each item
3 Select
･ Set with the same operation as Step 2.
時間指定 (Time specifying) fieldeSelect from each item
4 Select
現時刻で指定 (Specify by current time) : Search the route by current time
出発時刻指定 (Specified departure time) : Search the route by specifying the
departure time
到着時刻指定 (Specify arrival time) : Search the route by specifying the arrival
time
終電を利用 (Use the last train) : Search the route by using the latest train of
the day
Select 条件設定 (Condition setting) fieldeSet the required
5 itemse"上記で設定
(Set as above)"e"OK"
乗換条件 (Transfer condition) : Select the priority criteria of transfer from "早
い (Early)" "安い (Cheap)" "楽々 (Comfortable)"
徒歩ルート (Walking route) : Select the priority criteria from "おまかせ (Up to
you)" "屋根多い (Many roofs)" "階段少ない (Few stairs)"
特急利用 (Using express) : Select if you use express even if the total
distance of the route is less than 100 km
通常利用車種 (Car type for ordinary use) : Select the car type for use
GPS Function
257
F906i_E1kou
F906i.book
6 「"only by
Page 258
Monday, April 21, 2008
で検索 (Search by
)"
10:59 PM
)"or "
のみで検索 (Search
You can search the route only by "
で検索 (Search)" for total
のみで検索 (Search only)" for car only. The routes (up to 6
navigation and "
routes) are displayed as a result of the search. When a transfer route by a
different transportation system exists, the characteristics of the route is
displayed by icon.
早 (Early) : Reguire less time
安 (Cheap) : Fare is cheap
楽 (Comfortable) : Few transfers
オススメ (Recommended) : Meeting all conditions of 楽/早/安
有料 (Charged) : Using toll road
一般 (General) : Using general road
ルートを選択 (Select the route)e"ナビ・ルート確認 (Check the
7 navigation
route)"e"ナビ (Navigation)" or "ナビ(省電力)
(Navigation (Power saving))"e"はい (Yes)"
Start the navigation to the destination.
Registering the route : "ルートを登録 (Register the route)"
Checking the route : Select the routee"ルート確認 (Check the route)"e"はい
(Yes)"
❖ Screens and operations of Route (car)/Navigation (car)
display
･ The operations below are available on the navigation screen.
m : End the navigation and display the top screen
5 : Stop/Resume navigation
2 : Switch to crossing mode
c : Return to the current position
g/C/k/*/0/# : The same operations as the map display screen
･ The operations below are available on the quick access menu.
u : Search the parking areas around the destination
d : Display the search result (time, fare, etc.) or set the navigation
l : Search the route by adding up to 3 way-stops to the route to the destination
r : Search again the route from the current position to the destination
1 : Delete the route currently displayed
2 : Switch to the crossing mode
❖ Using "音声入力 (Voice entry)"
By 音声入力 (Voice entry) menu, by entering in a voice, you can easily check
peripheral information, get transfer information or see the map.
 Using "音声入力 (Voice entry)" of Local Search
While this software is active, me"Local Search"e"音声入力
1 (Voice
entry)"
The way of voice entry is displayed.
(Start voice entry)"
2 "音声入力開始
After the voice entry screen is displayed, enter the peripheral information to
search by voice.
Route to destination
Current position
or the direction
©2008 ZENRIN DataCom
Navigation (car) display screen
By recognizing the voice, a confirmation screen appears.
258
GPS Function
F906i_E1kou
F906i.book
Page 259
Monday, April 21, 2008
10:59 PM
･ If the recognition is wrong, enter again.
Location request
Providing your current location information
when requested
This is a service related to Location request; you can set so that location
information is provided upon request from other set parties.
･ To use a service related to Location request, a subscription to the service
provider may be required. You may be charged for using the service.
･ To use a service related to Location request, you must set Request permit/deny
to "Always permit" or "Permission period". And, you may be required to make
usage settings by services.
When " この辺のコンビニ (Peripheral convenience
store)" are entered by voice entry
❖ Using 設定／ヘルプ (Set/Help)
this software is active, me"設定・ヘルプ(Set/Help)"
1 While
･ The operations below are available.
各種設定 (Various settings) : Basic setting of software, setting of navigation,
setting of home, setting of the nearest station from home, deleting all
logs, initializing the software
ヘルプ・規約 (Help/Terms) : Check 使いかたの説明 (Explanation of usage),
よくある質問 (FAQ) or 利用規約 (Terms of service)
会員情報確認 (Check the subscription) : Check the subscription to "ゼンリン
(ZENRIN) 地図＋ナビ (Map + navigation)"
PC確認方法 (Confirmation method on a PC) : Display URL, Log-in ID or
password entry to view map application site for a PC
◆ When Location request is issued
 When "許可 (Permit)" is set for usage settings by services
Location request starts.
blinks, the GPS alert sound is emitted and the light
turns on or vibrator operates.
･ Press c or f to stop Location request. Location information is sent under
some timing.
Receiver name
Requestor name
Requestor ID
･ When the requestor ID matches a phone entry, the requestor name saved in
phonebook appears.
･ Requestor ID may not be displayed.
GPS Function
259
F906i_E1kou
F906i.book
Page 260
Monday, April 21, 2008
10:59 PM
･ When "毎回確認 (Check each time)" is set for usage settings by services, a screen
shown below appears. Select "Yes" to start Location request.
◆ Setting whether to permit/deny Location request

You can set if you provide location information when there is a request from other
parties.
･ "Always permit" or "Always deny" in this setting can also be set in initial
settings.→P48
[LifeKit] 761eAuthenticatee1-3
1m
･ With "Always permit" set, location information may be sent and notified to
the searcher without operations.
(blue) appears on the stand-by display when "Always permit" or
"Permission period" is set. When permission period is outside a valid
period,
(gray) appears. With FOMA terminal folded, or appears on
the sub-display.
Setting permission period : 3eSet the required itemseC
Start : Set time for "Always permit".
End : Set time for "Always deny".
･ You can set the next day exceeding 24:00.
Repeat : Set repetition of operation of the set time.
･ When "Day of week" is selected, select "Day/Week", select the day of the
week to perform Location request and press C.
Date : Set a period of time to perform Location request. When "Specify start
date" or "Specify start/end" is set, the items below can be set.
Start : Set day for "Always permit".
End : Set day for "Always deny".
･
✔INFORMATION
･ Sending Location information requires no charge.
･ Location request is unavailable while positioning with Position location or Notify
･
･
･
･
260
location, while FOMA terminal is out of service area or during Self mode, i-mode
communication with i-αppli or infrared communication/iC transmission. If the battery
is exhausted or Omakase Lock is activated while positioning, it is stopped.
Information is not delivered by Location request to the requestor under some wave
conditions.
If "毎回確認 (Check each time)" is set for usage settings by services when Location
request is issued during Public mode (Drive mode), location information is not sent.
If "許可 (Permit)" is set, a screen appears and location information is sent, but the GPS
alert sound is not emitted, and the light or vibrator does not operate.
With 2in1 ON, Location request for Number A is available regardless of mode of 2in1.
When you are required to provide the location information by a party using
imadocokantan search, it operates as below.
- Every time you are required, a confirmation screen for location information appears. If you select
"Yes", a rough positioning result is immediately notified to the other party. After the positioning,
high-precision positioning results are notified to the other party.
- Even if the location request is interrupted after selecting "Yes" on the confirmation screen of
location request, a rough positioning result is notified to the other party. In this case, although it is
recorded in the Loc. history, the location information is not displayed.
GPS Function
F906i_E1kou
F906i.book
Page 261
Monday, April 21, 2008
10:59 PM
❖ Operations of Location request with Permission period set
When Permission period is set from Request permit/deny, "Always permit" is
activated in periods listed below.
･ The column titled "Always permit" period shows periods with years omitted in
which "Always permit" is active if Permission period is set at 9:00, 2008/06/02.
･ If Repeat is set to "Day of week", the function is activated only on the specified
day of the week in the period specified in the field for "Always permit" period.
■ When time before the current time is set as Start
 Start : "08:00", End : "18:00"
Repeat
Date
None
ー
None
06/02
09:00-18:00
06/03 or later
08:00-18:00
Specify start date
Start : 2008/06/01
06/02
09:00-18:00
06/03 or later
08:00-18:00
■ When time after the current time is set as Start
 Start : "10:00", End : "18:00"
Repeat
Date
None
ー
"Always permit" period
06/02
10:00-18:00
None
06/02 or later
10:00-18:00
Specify start date
Start : 2008/06/01
06/02 or later
10:00-18:00
Specify start date
Every Day/ Start : 2008/07/01
Day of week Specify start/end
Start : 2008/06/01
End : 2008/06/30
07/01 or later
10:00-18:00
Specify start/end
Start : 2008/07/01
End : 2008/07/31
06/02-06/30
10:00-18:00
"Always permit" period
06/02
09:00-18:00
Every Day/
Specify start date
Day of week
Start : 2008/07/01
07/01 or later
08:00-18:00
Specify start/end
Start : 2008/06/01
End : 2008/06/30
06/02
09:00-18:00
06/03-06/30
08:00-18:00
Specify start/end
Start : 2008/07/01
End : 2008/07/31
07/01-07/31
08:00-18:00
07/01-07/31
10:00-18:00
GPS Function
261
F906i_E1kou
F906i.book
Page 262
Monday, April 21, 2008
10:59 PM
■ When time after the current time is set as Start and one on the next day
over 24 o'clock is set as End
 Start : "10:00", End : "02:00"
Repeat
Date
None
ー
"Always permit" period
06/02 10:00
-06/03 02:00
None
06/02 or later
10:00-02:00 next day
Specify start date
Start : 2008/06/01
06/02 or later
10:00-02:00 next day
Specify start date
Every Day/ Start : 2008/07/01
Day of week Specify start/end
Start : 2008/06/01
End : 2008/06/30
07/01 or later
10:00-02:00 next day
Specify start/end
Start : 2008/07/01
End : 2008/07/31
06/02-06/30
10:00-02:00 next day (until 07/01
02:00)
07/01-07/31
10:00-02:00 next day (until 08/01
02:00)
■ When time before the current time is set as Start and one on the next day
over 24 o'clock is set as End
 Start : "08:00", End : "02:00"
Repeat
Date
None
ー
"Always permit" period
06/02 09:00
-06/03 02:00
None
06/02 09:00
-06/03 02:00
06/03 or later
08:00-02:00 next day
Specify start date
Start : 2008/06/01
06/02 09:00
-06/03 02:00
06/03 or later
08:00-02:00 next day
Every Day/ Specify start date
Day of week Start : 2008/07/01
07/01 or later
08:00-02:00 next day
Specify start/end
Start : 2008/06/01
End : 2008/06/30
06/02 09:00
-06/03 02:00
06/03-06/30
08:00-02:00 next day (until 07/01
02:00)
Specify start/end
Start : 2008/07/01
End : 2008/07/31
07/01-07/31
08:00-02:00 next day (until 08/01
02:00)
◆ Making settings for using service 
[LifeKit] 763
1m
･ For next procedure, contact a related service provider.
◆ Changing host of service usage setup site 
Usually, you do not need to change this setting.
262
GPS Function
F906i_E1kou
F906i.book
Page 263
Monday, April 21, 2008
10:59 PM
[LifeKit] 764eSet the required itemseC
1m
Host : Select a host.
･ When "User setting" is selected, the items below can be set.
User host : Enter up to 99 one-byte characters for the host.
User host URL : Enter up to 100 one-byte characters for URL.
Notify location
Notifying your current location information
You can notify current location information to others (service providers applicable
to Notify location function).
･ To use Notify location, a subscription to a service provider applicable to Notify
location function may be required. And, you may be charged for using the
service.
･ Notify location requires usage fee.
･ Notify location is unavailable while positioning with Position location or
Location request, when FOMA terminal is out of service area or in Self mode.
Notification by entering a service client is unavailable in Keypad dial lock.
 Notifying by entering a service client
1 m [LifeKit] 751
a service client ID in the service client ID field (up to
2 122eEnter
one-byte characters)eg
When positioning,
blinks and the light turns on. The GPS alert sound is
emitted and the vibrator operates on completion of positioning.
･ Positioning is stopped when f is pressed while a message is being
displayed indicating that a location and phone number are sent or c or
f is pressed while positioning.
･ Even if positioning is interrupted, the location information is notified under
some timing.
Notifying to saved service client : 1e1-5eg
❖ Saving service client to LCS clients list
For Notify location, a service client can be selected from a list of those saved, if any.
You can also set so that your current location is notified to saved service client ID
of a specified party by making a voice/videophone call.
･ Up to 5 items can be saved.
･ No LCS client can be saved, edited or deleted with UIM not inserted.
[LifeKit] 7521e""
1m
･ When checking a service client already saved, select the service client to
check and press C to edit.
･ When deleting a service client already saved, press m and select "Delete".
Similarly, a service client can be saved to phonebook, sent by infrared
communication or iC transmission or copied/backed up to microSD card
from a submenu.
the required itemseC
2 Set
･ While "Quote phonebook" is selected from the submenu, a service client
name and phone number can be quoted from a phonebook.
Service client name : Enter the service client name in up to 16 two-byte (32
one-byte) characters.
Service client ID : Enter a number specified by a service provider you
subscribed to in up to 12 one-byte characters.
･ Numerals, "#" and " " can be entered.
Phone number : Enter a phone number of the other party in up to 26 one-byte
characters.
･ Numerals, "P", "T", "+", "#" and " " can be entered. You can set Notify
when calling when a phone number is entered.
Notify when calling : Set if you notify your location to a saved service client
ID when making a voice/videophone call to that client.
･ Set to "ON" to notify the location when making a call.
･ Set to "Confirm each calling" to display a confirmation screen asking if
you notify the location when making a call.
3 Check send resulteg
GPS Function
263
F906i_E1kou
F906i.book
Page 264
Monday, April 21, 2008
10:59 PM
✔INFORMATION
･ Information is not delivered to the other party under some wave conditions.
･ Even with Notify location set in LCS clients list, location cannot be notified in the cases
･
Page/Total pages
below.
- When a call is made without notifying caller ID
- When call is not connected because the other party is busy or out of service area
With 2in1 ON, location information is notified as Number A regardless of mode of
2in1.
Loc. history
Displaying histories of location information
checked
You can display histories of positioning performed by Position location, Location
request or Notify location function. Using location information in the log, you can
save location information in phonebook or create a message containing location
information URL.
･ Up to 50 location histories are saved. When exceeding the limit, items are
overwritten chronologically.
[LifeKit] 73
1m
･ Icon definitions.
: Position location
(gray) : Location request/positioning failure
(gray) : Notify location/positioning failure
2 Using Location information : Place the cursor on the history to use and
Select a history to display
m1
The next procedure→P253 "■Use location info menu"
Deleting 1 item : Place the cursor on the history and m21e"Yes"
Deleting selected items : m22eSelect the historieseCe"Yes"
Deleting all items : m23eAuthenticatee"Yes"
264
❖ Reading Loc. history log details screen
GPS Function
Loc. history log details screen for Position location
: Positioning date/time and function
: Receiver name for Location request/Service client name for Notify location
: Service client ID for Notify location
: Location information
: Requester's
name of Location request
: Requestor ID for Location request
･ From a submenu, you can display the Use location menu to use location
information or delete histories. When phone number or mail address
information of the requestor ID is contained in Location request history, the
information can be saved to phonebook.
✔INFORMATION
･ When positioning with Position location is stopped or fails, it is not saved in history.
･
･
･
･
And, location information is unavailable from histories of failing positioning with
Location request or Notify location.
When failed in positioning in Location request or Notify location, the location
information is not displayed.
Location information, if any, saved in histories of Location request or Notify location
is not sent to a service provider under some wave conditions.
When the requester ID of a Location request matches a phone entry, the requester
name saved in phonebook appears.
The location information recorded in the Loc. history differs from the location
information that was sent to the provide of the location or LCS client by wave
conditions etc.
F906i_E1kou
F906i.book
Page 265
Monday, April 21, 2008
10:59 PM
Setting GPS
✔INFORMATION
･ When positioning is made again or retried with Position location due to wave
conditions etc. only lighting/blinking of the light occurs.
◆ Setting positioning mode
･ In "Standard mode", positioning is performed in a short period of time.
･ "Quality mode" takes time for positioning. As a result, it may provide higher
accuracy than "Standard mode".
 Setting positioning mode for Position location
[LifeKit] 742
1m
Setting positioning mode for Notify location : m [LifeKit]
7522
Setting positioning mode for Location request : m [LifeKit] 762
2 1 or 2
◆ Setting actions in positioning 
 Setting actions for Position location
[LifeKit] 743
1m
Setting operation for Notify location : m [LifeKit] 7523
Setting operation for Loc. request-accept : m [LifeKit] 7651
Setting operation for Loc. request-verify : m [LifeKit] 7652
the required itemseC
2 Set
Ring alert : Set if you sound melody.
･ When "Melody" is set, select a melody.
Vibrate alert : Set a vibrator operation pattern.
Ring time (sec) : Set time in range of 0-30 seconds.
･ Set time in range of 0-20 seconds for Loc. request-verify.
Light alert : Set a lighting or blinking pattern and color of the light.
･ "Sync melody" cannot be selected. "OFF" cannot be selected for the case
of Loc. request-accept or Loc. request-verify.
･ When setting "Light pattern 1" or "Light pattern 2", light color cannot be
selected.
GPS Function
265
F906i.book
Page 266
Monday, April 21, 2008
10:59 PM
F906i_E1kou
F906i.book
Page 267
Monday, April 21, 2008
10:59 PM
1Seg
1Seg ......................................................................................................................................................................................
Before using 1Seg ...............................................................................................................................................................
Channel setting ....................................................................................................................................................................
Watching 1Seg ............................................................................................................................................ Activate 1Seg
Using Program guide i-αppli ..............................................................................................................................................
Reserving 1Seg watching/recording .................................................... Watching reservation/Recording reservation
Using data broadcasting .................................................................................................................... Data broadcasting
Using TVlink .........................................................................................................................................................................
Managing TVlink .................................................................................................................................................................
Watching 1Seg with Multi window ...................................................................................................................................
Recording 1Seg being watched .............................................................................................................. 1Seg recording
Making various settings related to 1Seg watching ................................................................................... User setting
Using remote controller with microphone F01 ................................................. Remote controller with microphone
Listening to music of 1Seg with audio device or car stereo ................................................................ FM transmitter
268
269
270
272
275
275
278
279
279
280
281
282
283
283
267
F906i_E1kou
F906i.book
Page 268
Monday, April 21, 2008
10:59 PM
◆ Radio waves
1Seg
1Seg is a terrestrial digital TV broadcasting service that allows mobile devices to
receive broadcasted data along with images and sounds. In addition, you can use
i-mode to acquire detailed program information, participate in quiz programs,
enjoy TV shopping, etc.
･ For details of "1Seg" service, refer to the website below.
The Association for Promotion of Digital Broadcasting
PC : http://www.dpa.or.jp/
i-mode : http://www.dpa.or.jp/1seg/k/
◆ Using 1Seg
･ 1Seg is a service provided by TV broadcasting enterprises (stations), etc.
･ This is a free broadcasting service on airwave requiring no subscription to
receive video, sound and data broadcasting of 1Seg.
･ There are 2 types of information displayed in the data broadcasting area : "Data
broadcasting" and "Data broadcasting site". "Data broadcasting" is displayed
using airwave along with images and sounds; while "Data broadcasting site" is
displayed by connecting to a site provided by TV broadcasting enterprises
(stations), etc., using information of data broadcasting. Sometimes, you may
connect to "i-mode site" etc. You need to subscribe to i-mode to connect to the
site.
･ For viewing "Data broadcasting site", "i-mode site", etc., you are charged packet
communication fees. Some sites require information fees (i-mode pay sites).
268
1Seg
1Seg is one of the broadcast services and a different type of radio waves
(airwaves) from that of FOMA service is received. Therefore, regardless of whether
you are in or out of FOMA service area, it cannot be received where airwaves do
not reach or during broadcasting interruptions.
Also, even in FOMA service area, reception condition may be poor or reception
may be unavailable in such places as below.
- A place far from the tower that the airwaves are sent from
- Mountain-ringed regions or a place between buildings where airwaves are interrupted by
geography or buildings
- Tunnel, underground or far back from a building where airwaves are weak or do not reach
To make the reception condition better, stretch out the 1Seg antenna. Also, by
changing the direction of the antenna, moving FOMA terminal closer to or further
from your body or changing the place, the reception condition may be improved.
◆ Screen appearing when using 1Seg for the first time
When using 1Seg for the first time after purchasing, a confirmation screen for 1Seg
activation appears.
If you press "OK" after confirming each item, the confirmation screen does not
appear subsequently.→P272
◆ Storage area
Storage area is an area dedicated to 1Seg only in the terminal. Based on the
settings made by TV broadcasting enterprises (stations), the storage area saves
information entered by customers according to instructions of data broadcasting.
Saved information may contain personal information such as answers to quizzes,
membership number, gender, age, occupation, etc.
Saved information, without reentry, may be displayed when viewing data
broadcasting sites or sent to TV broadcasting enterprises (stations).
Deleting storage area→P282
If UIM is replaced, a confirmation screen for initializing the storage area appears.
Select "Yes" and initialize the storage area. When "No" is selected, services using
the storage area are unavailable.
F906i_E1kou
F906i.book
Page 269
Monday, April 21, 2008
10:59 PM
■ Screen appearing when reading storage area
When using information saved in the storage area while watching a program, "Use
saved information? It may include information used by the same affiliate."
appears. Select "Yes" to display no confirmation screens subsequently when
reading saved information while watching the same program. Select "Yes
(Always)" to display no confirmation screens subsequently also for different
programs.
❖ Other convenient functions
Displaying and using data broadcasting→P278
Using Program guide i-αppli→P275
Watching reservation, recording reservation→P275
Using TVlink→P279
Recording video and still image→P281
One-key channel selection with remote controller number→P273
Activating 1Seg by rotating display→P365
Multi window (creating a mail etc. while watching 1Seg)→P280
■ 1Seg antenna
When watching 1Seg, the 1Seg antenna is used to receive 1Seg wave.
･ When changing the direction of the 1Seg antenna, do not give excessive force
to it.
･ When pulling out the 1Seg antenna, put your finger on the gut of the upper part
of 1Seg antenna and pull it.
･ When changing the direction of the 1Seg antenna, move it holding a part close
to the root of the 1Seg antenna.
･ When retracting 1Seg antenna, hold the root of the 1Seg antenna and retract
until it stops. Do not retract the 1Seg antenna with holding the head of it.
Before using 1Seg
■ 1Seg watching procedure
 When watching 1Seg for the first time
Step 1
Channel setting→P270
Save the channel list corresponding to the area where you watch 1Seg.
Step 2
Activating 1Seg→P272
Stretch out the 1Seg antenna and activate 1Seg.
■ When there is an incoming call or alarm is activated while watching 1Seg
･ 1Seg sound is interrupted in the cases below.
- i-mode mail with Display priority set to "Show message", SMS, MessageR/F reception (If
an image of movie/i-motion is played while receiving, 1Seg watching is interrupted)
- ToruCa downloaded from IC card reader
- Alarm (Alarm clock, schedule, Countdown timer) activated
･ If voice call, videophone call or PushTalk call is received, 1Seg watching is
interrupted.
･ For vertical display, the screen of the activated function appears and the sound
is emitted. End the function or press T to restart watching. For horizontal
display, 1Seg and activated function are displayed on two screens (→P280).
Ending the function returns to standard horizontal screen or horizontal full
screen of 1Seg watching.
1Seg
269
F906i_E1kou
F906i.book
Page 270
Monday, April 21, 2008
10:59 PM
✔INFORMATION
･ If UIM is not inserted, you unsubscribed to DoCoMo or made FOMA service inactive,
you cannot watch or record 1Seg.
･ If you repeat 1Seg watching and recording in communication disabled state, 1Seg
･
･
･
activation may be unavailable even with UIM inserted. In such a case, enable
communication e.g., by moving to FOMA service area, and retry 1Seg activation.
1Seg watching is interrupted when i-αppli is activated. Every time you press T,
you can switch 1Seg watching and i-αppli.
Note that DoCoMo assumes no responsibility whatsoever for any loss or modification
of saved contents resulting from malfunction, repair or other handling of FOMA
terminal.
When changing the model of or repairing FOMA terminal, information (TVlink,
information saved in the storage area, etc.) saved in the terminal cannot be
transferred; you are recommended to maintain a separate record of such information.
Watching 1Seg long time while charging may reduce the battery pack lifetime.
Channel setting
Broadcasting stations and channels that can be received vary by the area. To
watch 1Seg, you need to create a channel list that broadcasting stations and
channels are saved, and set it according to the area.
･ Savable number→P471
◆ Creating Channel list
Channel list should be created by either of the ways below.
Use preset
Broadcasting stations and channels that can be received are saved in advance by
area. Select from the area list and set.
Auto setting
Automatically search broadcasting stations and channels that can be received at
the place where you are and set. Perform by extending the 1Seg antenna in
terrestrial digital TV broadcasting service area.
･ The channels in the preset area cannot be watched in some places you watch.
In that case, make Auto setting. Other channels than the ones in the preset area
may be searched.
 Set by "Use preset"
[1Seg] 7eC
1m
･ When there is no Channel list, a confirmation screen for creating a list
appears.
2 Creating by automatic search :
"Use preset"
a "Auto setting"e"Yes"eSelect an area
Auto setting starts and, upon completion, a confirmation screen appears.
･ Select "No" to display an auto-scanning channel setting screen. At this
time, channel list is named after the date and time of setting.
･ A channel of the selected area is searched for by priority.
･ To interrupt the channel setting, press g and select "Yes".
b "Yes"
Channel list is registered.
･ You do not need to perform Step 3.
Select an areaeSelect a prefectureeSelect a local
3 municipalitye"Yes"
Channel list containing broadcasting stations available in the selected area is
created.
･ In some cases, selection of a municipality is not required.
270
1Seg
F906i_E1kou
F906i.book
Page 271
Monday, April 21, 2008
10:59 PM
✔INFORMATION
･ Operation on the screen while watching or recording 1Seg : m2
･ It takes approximately 60 seconds to search for channels in Auto setting. It may take
･
･
･
longer time depending on the number of broadcasting stations and airwave
conditions.
Auto setting performed near a noise source such as a PC or LCD TV may require a
time.
While Auto setting is set, system sound is not generated.
Auto setting is unavailable while recording.
◆ Setting/Operating Channel list
･ You cannot Set Channel list to use while recording.
[1Seg] 7
1m
A list of Channel list appears.
･
appears before the channel list in use.
Displaying Channel list while watching 1Seg : m2 on the 1Seg watching
screen.
the cursor on a channel list and a
2 Place
Channel list to use is set and TV station list appears.
･ If setting while watching 1Seg, 1Seg watching screen appears immediately.
✔INFORMATION
･ When there is only one Channel list saved, it is automatically set as the one to be used.
❖ Operating Channel list
During Channel list display, the operations below are enabled.
Displaying TV station list : Place the cursor on a channel list and g
･ You can watch by selecting the channel number.
Updating Channel list : Place the cursor on a channel list and m4
Next procedure→P270 Step 2 in "Creating Channel list"
Deleting a channel list : Place the cursor on a channel list and
m51e"Yes"
Deleting all channel lists : m52eAuthenticatee"Yes"
Changing a channel list name : Place the cursor on a channel list and
m2eEnter a channel list name (up to 10 two-byte (20 one-byte)
characters)eC
Switching remote controller numbers : Select a channel listePlace the cursor on
a channel and m1eSelect a channel to switch
Deleting a channel : Select a channel listePlace the cursor on a channel and
m2e"Yes"
･ If only 1 channel is saved in a channel list, that channel cannot be deleted.
✔INFORMATION
･ While watching or recording 1Seg, operations below are unavailable for a currently
active channel list.
- Deleting a channel list
- Updating a channel list
- Deleting a channel from a channel list*
- Switching remote controller numbers*
* Operation is available if only recording 1Seg without watching.
1Seg
271
F906i_E1kou
F906i.book
Page 272
Monday, April 21, 2008
10:59 PM
Activate 1Seg
◆ Reading and operating screen
Watching 1Seg
1 A confirmation screen for using 1Seg appears.
･ For the second and subsequent activation, the channel previously watched
is displayed.
･ When activating for the second time or after, if Channel list is not set, a
screen to perform channel setting appears. Press "OK" and create Channel
list→P270 Step 2 and the following steps in "Creating Channel list"
usage conditionse"OK"
2 Check
A screen for confirming the storage area appears.
jklm
nopq
1Seg watching screen (Standard screen)
Data broadcasting full-screen
ef
gh
displayed contentse"OK"
3 Check
1Seg watching starts.
･ If the channel list is not set, a screen for urging you to set the channel list
appears. Press "OK" and create Channel list→P270 Step 2 and the following
steps in "Creating Channel list"
✔INFORMATION
･ You can also activate 1Seg watching in the ways below.
･
･
･
272
- Select a channel from TV station list screen of Channel list
- Select 1Seg watching information etc. displayed on Program guide i-αppli, mail, MessageR/F, iChannel, site, Web site, etc. (Media To)→P169
- Watching reservation→P275
When using 1Seg watching for the first time, operate within FOMA service area.
A confirmation screen for 1Seg usage or storage area once appeared or a
confirmation screen for which "Yes (Always)" is selected during 1Seg operation does
not appear subsequently unless UIM is replaced or Reset permit status is done.
If you select "Yes (Always)" on a confirmation screen, subsequent updating of data
broadcasting or data broadcasting site information, etc. may be performed without
confirmation, requiring packet communication fees.
1Seg
efghi
jklmnopq
1Seg watching screen (Horizontal standard screen)
jknfem
1Seg watching screen (Horizontal full-screen)
a FM transmission state
: During FM transmission→P283
b Video
F906i_E1kou
F906i.book
Page 273
Monday, April 21, 2008
10:59 PM
c Subtitle
Appear when there is subtitle information in the program.
When displaying a subtitle on 1Seg watching screen (Horizontal standard
screen), the subtitle appears instead of e-q.
d Data broadcasting
Display data broadcasting or data broadcasting site of the program.
e Remote controller number
Indicate a remote controller number of the currently selected station.
While recording,
appears next to the channel number indicating channel
selection is unavailable.
is not displayed on horizontal display.
f Broadcasting multiple programs
: Appear when multiple programs (service) are broadcasted on one channel.
You can switch and watch the program.→P274
g Time shift play
: In time shift play
: In time shift fast forward play
h UP/DOWN selection
i Broadcasting station name/program name
A broadcasting station name appears during channel selection and a program
name is displayed after selection.
When a program being watched is interrupted, "Unavailable channel" appears.
j 1Seg reception level
: Outside broadcasting service area
Strong
Weak
k 1Seg ECO mode
: Appear when 1Seg ECO mode is on.
l Sound state
: Stereo
: Monaural
: Main sound
: Sub sound
: Main sound+Sub sound
m Volume
: Displayed when voice output is available.
: Appear when the sound is stopped regardless of the volume level.
: Indicate that side keys [▲▼] can be used to adjust the volume. It does
not appear on 1Seg watching screen (Horizontal full-screen).
n Recording
: Appear while recording. If recording time is set, the remaining time is also
unavailable.
o OFF timer
With OFF timer set, indicates remaining time or
(until end time).
･ Remaining time is displayed if "End time" is set from Reserve program.
When the remaining time is more than 99 minutes, only
appears.
p Browser function state
: Appear when 1-9, *, 0, # can be used to select an item
in data broadcasting or data broadcasting site. At this time, one-key channel
selection is disabled.
q Key guidance
: Indicate that, during concurrent execution of 1Seg watching and
another function, T can be used to switch the function.
✔INFORMATION
･ When going outside broadcasting service area while selecting a channel, a black
screen is displayed for both video and data broadcasting.
❖ Operations enabled while watching TV
Side keys [▲▼] : Adjust volume
Side key [▲] (1 second or more) : Gradually raise the volume
Side key [▼] (1 second or more) : Silent
1-9, *, 0, # : One-key channel selection from TV station list*1
I (Vertical screen) : Switch standard screen/data broadcasting full-screen
I (Horizontal screen) : Switch horizontal standard screen/horizontal full-screen
(with no icons)/horizontal full-screen (with icons)
C : Activate Program guide i-αppli
f : End 1Seg watching
･ On an exit confirmation screen, select "Yes" to end.
Except for data broadcasting full-screen
h : Select previous or next channel on TV station list
h (1 second or more) : Search for previous or next frequency available*2
a : Switch display/hide of the subtitle
P (1 second or more), T (1 second or more) : Start/Stop video recording→P281
P : Save still image→P282
Data broadcasting full-screen
h : Move to previous or next page*3
1Seg
273
F906i_E1kou
F906i.book
Page 274
Monday, April 21, 2008
10:59 PM
With data broadcasting display area
j : Scroll data broadcasting
j (1 second or more) : Fast scroll of data broadcasting
M, c : Return to the top page*4
Without data broadcasting display area
j : Adjust volume
u (1 second or more) : Gradually raise the volume
d (1 second or more) : Silent
*1 * for 10ch, 0 for 11ch, # for 12ch, 13ch and up can be selected from TV
station list.
*2 Making channel search, after moving etc., may allow you to receive wave from a
broadcasting station not saved. When reception is unavailable, the currently watching
channel reappears. The broadcasting station succeeded in wave reception can be saved to a
channel. Note that the channels may not be searched in the order of the remote controller
number because channel search is made in the order of frequency.
*3 Available when previous and next pages are stored in the cache.
*4 By the displayed contents, an operation such as returning to the previous page may be
performed.
･ Press m01 to display Key function help.
Checking TV station list : m1
･ You can switch to a channel by selecting it from TV station list.
Saving currently watching channel to Channel list : m3ePlace the cursor on
the channel and g
･ When a channel already saved is selected, a confirmation screen for overwriting
appears.
･ Up to 62 channels can be saved.
Setting/Canceling OFF timer : m5e1-5
Checking program information : m72
･ You can check Program info (start time - end time, program name), Program
description, TV station, Sound/Subtitle info (1st sound, 1st sound/2nd sound, No
sound, 1st language, 1st language/2nd language, No subtitle). Note that
information not set or read may not be displayed.
Creating mail : m73
Display a mail creation screen with information for 1Seg watching about the
currently viewing program entered to message text.
Switching service : m95e1-3
274
1Seg
･ This is enabled when another program (service) is broadcasted in the same
channel.
Switching ON/OFF of 1Seg ECO mode : m96
When setting 1Seg ECO mode to ON, brightness of the light is reduced a little to
reduce the power consumption by 1Seg watching.
･ In well-lighted area, power saving effect may not be enough.
❖ Time shift function
When there is an incoming voice, videophone or PushTalk call while viewing, you
can play the movie received during the call approximately 3 minutes.
Upon completion of the call, a confirmation screen for replaying the movie
received during the call appears.
Replay of the program continues even after the part received during the call ends.
･ Time shift function starts automatically.
･ Unavailable during Fake call.
･ Data broadcasting is not available.
･ For a long call duration, first images may be overwritten.
･ Time shift function does not operate when a call is received while selecting a
channel.
･ Operations during time shift operation are as shown below.
r : Fast forward play
C : Ordinary play (in fast forward play)
･ During fast forward play, voice may not be heard clearly.
･ To return to ordinary watching from time shift playing, press c and select
"Yes".
✔INFORMATION
･ With Close setting set to "Continue", folding FOMA terminal during 1Seg watching
does not stop the sound.
･ Since airwave conditions are affected by geographic features etc., some channels
･
･
may be unavailable in certain locations. By updating Channel list and/or performing
Auto setting, you may receive other channels.→P270
By the conditions of the airwave, the events below may occur.
- Sound interruption
- Data broadcasting inoperative
- Video contains block noise or stops.
When activating 1Seg watching or a channel is switched, it takes a time before
watching is enabled.
F906i_E1kou
F906i.book
Page 275
Monday, April 21, 2008
10:59 PM
･ Sounds can be emitted from audio devices etc.→P283
･ When 1Seg ECO mode is ON, Light setting is disabled.
･ When OFF timer end time comes, a confirmation screen for ending the watching
･
･
･
･
･
appears. When 30 seconds elapse without doing any operations, 1Seg watching
stops.
If Activate 1Seg is started from information for 1Seg watching or Program guide
displayed on watching reservation, site or mail, which specifies an end date/time, OFF
timer is automatically set. After that, OFF timer can be reset while watching 1Seg.
When another channel is selected with OFF timer set to "Complete program", the end
date/time set in OFF timer changes to the end date/time of the program broadcasted
on the channel selected. Note that, the end date/time does not change unless there is
information.
The receiver of the mail containing information for 1Seg Watching, if applicable to
Media To function, can use the entered program information to watch the program.
If mail is created from a 1Seg watching screen, video display stops on vertical display.
On horizontal display, Multi window starts.→P280
During 1Seg watching, system sound is not emitted.
Using Program guide i-αppli
You can use Program guide i-αppli for selecting a program to start 1Seg watching
or watching reservation or recording reservation.
･ "Gガイド番組表リモコン (G-GUIDE TV Remote Controller)" is saved as Program
guide i-αppli by default.→P232
[1Seg] 2
1m
Program guide available in the area you live are displayed.
･ When operating from a 1Seg watching screen, press C.
･ Press m to watch a program being broadcasted from the selected
channel.
･ To exit Program guide i-αppli, use the procedure specified for each i-αppli.
･ For details, refer to "Mobile Phone User's Guide [i-mode] FOMA version".
✔INFORMATION
･ When using Program guide i-αppli for the first time, you must make initial settings.
･ You can use "Program guide key setting" in Software settings of i-αppli to set up
Program guide i-αppli. When Program guide i-αppli is downloaded and Program
guide key setting are made, the downloaded Program guide i-αppli is activated.→
P227
Watching reservation/Recording reservation
Reserving 1Seg watching/recording
Watching reservation allows you to automatically activate 1Seg watching at the
reserved date and time or notify the program start with an alarm. Recording
reservation automatically starts recording at the reserved date and time.
･ Up to 100 watching and/or recording reservations can be saved in total, but the
savable number varies by the number of saved items in Scheduler.→P471
･ You can also use channel information shown in Program guide i-αppli, site or
mail to save reservations. In that case, a reservation saving screen already
including a start date/time, end date/time, channel and program name may
appear.
◆ Saving watching reservation
[1Seg] 4eCeSet the required items
1m
Set Start time, End time, Channel, Program or Use as alarm.
･ End time or Program can be saved without setting.
･ Up to 100 two-byte (200 one-byte) characters can be entered for program
name.
･ When setting Use as alarm to "Yes", 1Seg is activated after activation
notification without displaying confirmation screen.
･ When setting watching time to 24 hours or more,
is displayed in the
upper-right corner of the set date on the calendar screen of Scheduler. And,
is displayed below the individual watching reservation icons on the
schedule list of the calendar screen, the day view screen or booking list of
Booking list (Long-term schedule).
to switch to Notify start time screeneSet the required items
2h
Set Notify start, Notify in advance, Alarm setting or Sync TV start.
･ When setting Notify start to "No", notification or activating 1Seg is not
performed even when Start time comes. Note that it is displayed in
Scheduler and Booking list.
･ Notify in advance sets the time to display Notify start.
･ When setting Alarm setting to "Yes", Notify start appears for one minute
and an alarm sound is emitted.
1Seg
275
F906i_E1kou
F906i.book
Page 276
Monday, April 21, 2008
10:59 PM
･ Alarm sound can be selected. When "Melody" is selected, select an alarm
sound; when "Phone setting" is selected, Schedule reminder of Ring alerts
& Sounds is used.
･ Sync TV start sets whether 1Seg watching starts or not after activation
notification. When setting Use as alarm to "No", a confirmation screen
appears after activation notification.
to switch to Other settings screeneSet the required items
2h
Set Repeat, Priority or Record to:.
･ When "Day of week" is selected by Repeat, select a day of the week by "Day/
Week".
･ If Repeat is set,
is displayed in the upper-right corner of the set date on
the calendar screen of Scheduler. And,
is displayed below the individual
recording reservation icons on the schedule list of the calendar screen, the
day view screen or booking list of Booking list (Repeat schedule).
･ By Priority, set whether to start recording automatically while using the
function that cannot be used at the same time with recording, and set
whether to display the confirmation screen for recording.
･ By Record to:, select the saving destination for the recorded movie from
FOMA terminal or microSD card.
to switch to Other settings screeneSet the required items
3h
Repeat : Set repetition of operation of watching reservation. When "Day of
week" is selected, select "Day/Week" and select a day of the week.
is displayed in the upper-right corner of the set date on
the calendar screen of Scheduler. And,
is displayed below the individual
watching reservation icons on the schedule list of the calendar screen, the
day view screen or booking list of Booking list (Repeat schedule).
･ If Repeat is set,
4 Ce"Yes"
･ When watching reservation is set,
appears on the stand-by display.
3 Ce"Yes"
･ When setting recording reservation,
for the radio wave conditions at recording start and recording appears. If
you select "Yes (Confirm once)", a confirmation screen for recording
instead of radio wave conditions and recording appears from the next
recording reservation.
◆ Saving recording reservation
[1Seg] 4eaeSet the required items
1m
Set Start time, End time, Channel or Program.
･ Program can be saved without setting.
･ Up to 100 two-byte (200 one-byte) characters can be entered for program
name.
✔INFORMATION
･ Watching reservation and recording reservation are also saved to a schedule of
･ When setting recording time to 24 hours or more,
is displayed in the
upper-right corner of the set date on the calendar screen of Scheduler. And,
is displayed below the individual recording reservation icons on the
schedule list of the calendar screen, the day view screen or booking list of
Booking list (Long-term schedule).
･
･
･
･
276
1Seg
appears on the stand-by display.
･ If you make a recording reservation in default state, a confirmation screen
Scheduler. Note that Scheduler cannot be used to view, edit or delete details of
reservation.
With Alarm setting set to "Yes", the alarm sounds for one minute after displaying
activation notification. 1Seg watching is not activated while the alarm sounds. If you
want to activate 1Seg watching exactly on the start time, set Notify in advance to "1
min before".
When Channel list is not set, no reservations can be made.
You cannot set the start date and time of recording reservation between the current
time and 2 minutes later.
Even if Priority is set to "Operation", when recording not during 1Seg watching, the
confirmation screen does not appear even if the date and time for recording
reservation come and it starts automatically.
F906i_E1kou
F906i.book
Page 277
Monday, April 21, 2008
10:59 PM
◆ When the reserved date and time come
･ Recording reservation starts 1 minute before the start date and time to prepare
❖ When the time set in watching reservation comes
･ To cancel recording, activate 1Seg watching and perform operations to cancel
The saved reserved contents appear on the display.
･ With Alarm setting set to "Yes", the volume, vibrator and light operations are the
same as those for schedule reminder.
･ Pressing f while the alarm is sounding stops the alarm and returns to the
previous screen.
･ When pressing f or any key except side key [▼] while the alarm sounds,
you can display activation confirmation screen or activate 1Seg watching.
･ When the time set in watching reservation comes while recording, a
confirmation screen for watching appears. If a channel to watch is different from
the one being recorded, confirmation screens for ending recording and starting
watching appear.
✔INFORMATION
･ Display operations for the reserved contents are the same as those for the schedule
reminder.
･ When multiple watching reservation items or schedules are saved, the alarm of the
･
･
･
watching reservation or schedule saved the last becomes effective. 1Seg watching
may not be activated according to Sync TV start depending on the order of saving.
The Schedules or watching reservation not activated can be confirmed by pressing
h after the alarm sound is stopped.
When the specified date and time come during a call or PushTalk session, a warning
sound instead of alarm sound is emitted and the activation notification screen
appears. At this time, even if Use as alarm or Sync TV start is "Yes", 1Seg watching is
not automatically activated. Pressing g on the activation notification screen can
display the activation confirmation screen or activate 1Seg watching. Note that 1Seg
watching cannot be activated unless a call or PushTalk session is finished.
During a fake call, when the specified time that Use as alarm is set to "Yes" and Alarm
setting is set to "No" comes, the activation notification screen appears with no sound.
When pressing s while the alarm sound is emitted or there is an incoming voice
call, 1Seg watching is not activated automatically. Pressing g can display the
activation confirmation screen or activate 1Seg watching.
❖ When the time set in recording reservation comes
Recording automatically starts and
for recording.
blinks.
recording.
Activating 1Seg watching→P272
Canceling recording→P281 Step 2 in "Recording video"
✔INFORMATION
･ Preparations for recording are made under poor condition of airwave reception, and
recording is started when the wave reception condition becomes better.
･ When reserving times are overlapped, a reservation with earlier start time is
･
･
･
interrupted by the one with later start time. Note that, if the start times are the same,
the later reservation is given priority.
When making recording reservation without displaying the confirmation screen for
using 1Seg, recording is not performed even when the specified time comes.→P272
In case the saving destination is microSD card, recording may not be performed while
functions such as PDF data browsing with a heavy workload on FOMA terminal or
other functions using microSD card are operating.
When reserved recording starts during the operations of the functions below,
according to Priority (→P276), either the operation is interrupted and the recording is
started or a confirmation screen for interruption of operation and start of recording
appears. For the function that the operation is interrupted, the data currently edited
may be discarded.
- Camera, Sound recorder, Bar code reader
- Play of Music player, Download of music data
- Some i-αppli (A confirmation screen appears regardless of Priority).
◆ When reserved recording ends
When reserved recording ends, an icon indicating the result of reserved recording
appears on stand-by display. You can select the icon to check Recording result.
･ Recording result icons are shown below.
: Completed recording reservation
: Failed in recording reservation
･ When performing multiple reserved recordings, the icon of the last recording
result appears.
･ The saving destination, file name and conditions of programs that cannot be
recorded are the same as those for recording while watching.→P281
･ Recorded video can be played from completed Recording result.
appears.
1Seg
277
F906i_E1kou
F906i.book
Page 278
Monday, April 21, 2008
10:59 PM
･ Recording result, reason of failure (only for failure), broadcasting station
◆ Checking/Operating reservation
[1Seg] 4
1m
The booking list appears.
Displaying reservation details screen : Select the reservation
Editing reservation : Place the cursor on the reservation and m3eEdit
the reservationeCe"Yes"
･ To edit from reservation details screen, press C.
Deleting reservation : m4e1-3e"Yes"
･ To delete 1 item, operate by placing the cursor on the reservation.
･ When "All past items" is selected, all reservations for the past date and time
are deleted.
･ When "All items" is selected, perform authentication.
･ To delete 1 item from reservation details screen, press m4.
Sorting reservation : m5e1 or 2
･ "Air date(new→old)" sorts from the earlier reservation to later, and "Air
date(old→new)" sorts from the later reservation to earlier.
✔INFORMATION
･ Reservations with the start date/time already passed appear after those not passed,
unless sorted.
◆ Checking result of reserved recording 
･ Up to 50 items can be saved. When exceeding the limit, items are overwritten
chronologically.
[1Seg] 5
1m
Recording result list appears.
･ The list shows recording result icon, program name, broadcasting station
name and recording start date and time.
･ Recording result icons are given below.
: Completed recording reservation
2 Details of Recording result appear.
Place the cursor on a history and C
278
1Seg
: Failed in recording reservation
name, program name, recording start time and recording destination can
be checked.
Playing recorded program : Place the cursor on the completed history and g
･ Playing is unavailable when recorded program is moved or deleted.
Deleting 1 history : Place the cursor on the history and m1e"Yes"
Deleting all histories : m2eAuthenticatee"Yes"
✔INFORMATION
･ Recording reservations canceled because they were duplicated with other
reservations or because FOMA terminal was not turned ON at the start time are not
recorded in Recording result.
Data broadcasting
Using data broadcasting
1Seg allows you to use data broadcasting as well as video and sound. Various
information containing still images and/or videos, such as a site linked with a
program, can be used.
1Seg watching screen (standard screen) or data broadcasting
1 On
full-screen, jeSelect the required items
Data broadcasting is shifted to data broadcasting site display.
Data broadcasting and data broadcasting site→P268"Before Using 1Seg"
Operations while displaying the screen→P273
･ Each time you press I, standard screen and data broadcasting fullscreen are switched.
･ Also during data broadcasting, 1Seg sound is emitted.
･ For some selected items, confirmation screen for connecting to site or
website, starting downloading , activating other functions, etc. appears.
Select "Yes" to use the function. If you select "Yes (Always)", the
confirmation screen does not appear for using the same function from the
next time, and the information of data broadcasting/data broadcasting site
may be updated automatically. Note that, packet communication fee may
be charged at this time.
･ You can make data broadcasting operations from a submenu.
m81 : Return to previous page
m82 : Go to next page
F906i_E1kou
F906i.book
Page 279
Monday, April 21, 2008
10:59 PM
m83 : Read the current page again
m84 : Display details of certificate→P172
m85 : Set images and sound effects for data broadcasting site→
P172
m87 : Return from a data broadcasting site to data broadcasting
✔INFORMATION
･ When empty space in the storage area is not enough, a confirmation screen for
overwriting appears. When overwriting, follow the instruction on the screen.
･ You can set the image for the data broadcasting site, a data broadcasting site or the
･
sound effect for the data broadcasting also by pressing m [1Seg] 832 on
the stand-by display.
With Close setting for data broadcasting and data broadcasting site set to "Continue"
or "Mute", information may be updated even when FOMA terminal is folded,
requiring packet communication fees.
TVlink
Using TVlink
For some data broadcasting and/or data broadcasting site, site and memo
information can be saved in TVlink. The site or memo information saved in TVlink
can be directly displayed.
･ Saved contents can only be used by operating from 1Seg. They cannot be used
from i-mode or Full Browser.
◆ Saving in TVlink
When selecting a savable item in TVlink, a confirmation screen for saving it in
TVlink appears.
･ Savable number→P471
Select a savable item in TVlinke"Yes"eSelect a folder
･ When trying to save the same URL or memo information, a confirmation
screen for overwriting appears.
✔INFORMATION
･ When empty space in the storage area is not enough or exceeding the savable
number, a confirmation screen for overwriting appears. When saving, follow the
instructions on the screen to overwrite TVlink.
◆ Displaying saved TVlink
[1Seg] 6eSelect a foldereSelect a TVlink
1m
･ Icon definitions :
: Folder
: Empty folder
: Link to data broadcasting site
: Link to site or website using i-mode or Full Browser
: Text
information
･ When selecting memo information, a memo screen appears.
･ TVlink list can be displayed also in the ways below.
- Press m86 on 1Seg watching screen
- Press m2 when data broadcasting site is displayed from TVlink list
- From data broadcasting or data broadcasting site, select a link to display TVlink list
2 "Yes"
Displaying details screen : C
✔INFORMATION
･ For some data broadcasting or data broadcasting site, a confirmation screen for
automatically displaying TVlink list appears when displaying a site.
Managing TVlink
You can move or delete TVlink or arrange them using folders.
･ Up to 20 folders can be created.
[1Seg] 6
1m
Deleting a TVlink : Select a folderePlace the cursor on a TVlink and
m21e"Yes"
Deleting selected TVlinks : Select a folderem22eSelect a
TVlinkeCe"Yes"
Deleting all TVlinks in a folder : Select a
folderem23eAuthenticatee"Yes"
Deleting all TVlinks : m4eAuthenticatee"Yes"
Moving a TVlink : Select a folderePlace the cursor on a TVlink and
m31eSelect a folder to move to
Moving selected TVlinks : Select a folderem32eSelect
TVlinkseCeSelect a folder to move to
1Seg
279
F906i_E1kou
F906i.book
Page 280
Monday, April 21, 2008
10:59 PM
Creating a folder : m1eEnter a folder name (up to 8 two-byte (16 onebyte) characters)eC
Deleting a folder : Place the cursor on the folder and
m2eAuthenticatee"Yes"
･ When there is only 1 folder, it cannot be deleted.
Changing a folder name : m3eEnter a folder name (up to 8 two-byte
(16 one-byte) characters)eC
Sorting folders : Place the cursor on a folder me5 or 6
*4 Detail info from playing and playing screen of movie/i-motion cannot be displayed on the
Multi window.
*5 When saving mails in microSD card or those stored in Data Center with Data Security
Service to FOMA terminal, Multi Window is not available.
*6 Mail in microSD card cannot be displayed on Multi window.
*7 If you start positioning or communication by GPS, Multi window ends.
*8 Switched to Multi window only when Alarm is activated while watching 1Seg. When
Alarm sound is i-motion, "Pausing 1Seg..." appears on the 1Seg screen.
1 While watching 1Seg, seSelect a function
Watching 1Seg with Multi window
On the screen split to left and right, you can perform another function while
watching 1Seg.
･ It is available only on the horizontal display.
When used concurrently with i-mode
or Full Browser, data broadcasting is
displayed along with remote
controller number etc.
❖ Using another function while watching 1Seg
Multi Window appears when Activate 1Seg and one of the functions below are
used at the same time.
- Voice call*1, videophone call*1, PushTalk*1, Fake call
- Mail display*2, 3, mail creation, Chat mail, Check new message
- i-mode, Full Browser, i-Channel
- i-αppli list, Display light of i-αppli, Vibrate effect, Power saving
- Phonebook, PushTalk phonebook, Received calls, Redial, Answer machine, Voice memos,
Mail logs, User information
- Displaying of image list, list/detail information of movie/i-motion*4, list/detail information of
My Document, files of Word, Excel or PowerPoint
- Infrared communication/iC transmission, packet communication with a PC, microSD card*5,
, Data Center*5, GPS*7, Pedometer, IC card content
- Scheduler, Notepad, Alarm clock, Calculator, Dictionaries, Countdown timer
- Call alert volume, mail/message alert volume, i-αppli alert volume, pointing device setting
- Alarm*8 of schedule, Alarm clock or Countdown timer
*1 1Seg watching is interrupted.
*2 Melody attached to mail and the sound effect of Flash graphics in Deco-mail or DecomeAnime cannot be played.
*3 Detail display is not available for mail or SMS received from parties not saved in
Phonebook.
280
1Seg
Creating mail during 1Seg watching
･ To switch Multi window and 1Seg watching screen, press T. Note that,
when using 1Seg watching, Full Browser, Word, Excel or PowerPoint file at
the same time, the screen is switched in the order of Multi window→the
screen of the function used at the same time→1Seg watching screen each
time you press T.
✔INFORMATION
･ While executing a function available on Multi window during 1Seg watching on
･
vertical display, turning the display activates Multi window. Note that, when setting
Turn-display option to "1Seg : at any mode", the 1Seg watching screen is displayed.
Even when Multi window is activated by selecting another function, no 1Seg image
may appear or 1Seg sound may remain sounding during display of other functions.
F906i_E1kou
F906i.book
Page 281
Monday, April 21, 2008
10:59 PM
❖ Receiving a voice call/videophone call/PushTalk call while
watching 1Seg
･ Displayed on Multi window, but 1Seg watching is not available.
･ Viewing recorded video or still images→P331
･ Savable number→P308, 471
･ Recordable time→P469
 When a voice call comes in
◆ Recording video
1 The ring alert sounds and switched to Multi windows screen. "Pausing
･ Recording is unavailable on data broadcasting full-screen.
A voice call comes in
1Seg..." appears on the 1Seg screen and the image and sound of 1Seg is
interrupted.
the 1Seg watching screen, T (1 sec. or more) or P (1 sec. or
1 On
more)
1Seg recording starts.
･ Even while recording, the same operations as those during ordinary 1Seg
watching can be performed except some functions.→P272
･ While recording, channel switching, Auto setting, using OFF timer and
service switching are unavailable.
2n
Talking is enabled.
･ By default, you can talk also by rotating the display from horizontal to
vertical.→P365
･ When talking ends, you can watch a program received while talking.→P274
❖ Receiving mail, MessageR/F or SMS during 1Seg watching
(1 sec. or more) or P (1 sec. or more)
2T
Recording stops and watching continues.
･ The saving destination and recording end time when not performing
･ With Display priority set to "Show message", the screen is automatically
ending operation depend on Record setting.→P283
Stopping only watching and continuing recording : fe"End reception"
Watching stops and recording continues.
appears on the stand-by display.
･ To stop recording before specified recording end time, perform Activate
1Seg and operations for ending recording.
Stopping recording and watching : fe"Yes"
switched to Multi window. When display of the reception result screen ends,
Multi window is closed and 1Seg watching screen reappears.
1Seg recording
Recording 1Seg being watched
You can record movies, sounds and data broadcasting (video recording) or save
movies being broadcasted as still images (still image recording).
･ Video is saved to "Video(Phone memory)" or "Video(microSD)" folder in "1Seg"
of Data Box according to the save destination setting, and still images are saved
to "Image(Phone memory)" folder.
･ The program name is assigned as a display name of video, and the saved date
and time are assigned as display names of still images.
･ Saved date and time are automatically set as the file name.
･ Programs whose recording is inhibited are not applicable to video/still image
recording. When airwave reception condition is not good, recording may be
unavailable.
･ Recorded data cannot be sent via mail attachment or infrared communication/
iC transmission. They cannot be set to the stand-by display etc.
✔INFORMATION
･ When the memory space is not enough or exceeding the savable number, you cannot
record.
･ Recording stops when storage area is exhausted while recording.
･ Recording at a time ends when the recorded data reaches 2 Gbytes. In terms of time,
･
･
it is approximately 11 hours. Recording time may be increased/decreased by the
broadcasted contents etc.
In case the saving destination is microSD card, recording may not be performed while
functions such as PDF data browsing with a heavy workload on FOMA terminal or
other functions using microSD card are operating.
In the cases below, movie and sound stops, but recording continues. After the related
functions end, 1Seg watching restarts.
- When a voice call, videophone call, PushTalk or 64K data communication is received
- When a voice call, videophone call or PushTalk call is made
1Seg
281
F906i_E1kou
F906i.book
･
･
･
･
･
･
･
Page 282
Monday, April 21, 2008
10:59 PM
- When the date and time specified in Alarm clock or schedule*1 come
- When mail, MessageR/F is received (with Display priority of mail set to "Show message")
- When a melody is played
- When i-motion is played/displayed
- When i-αppli is activated from data broadcasting*2
*1 For watching reservation schedule, if you select "Yes" on a confirmation screen for stop of
recording and activation of watching, recording is stopped if the channel is different from the
one being recorded. If the reserved channel is same as the one being recorded, recording
continues.
*2 A confirmation screen for watching and continuation of recording appears.
In the cases below, movie and sound are interrupted and recording stops. After the
related functions end, you can restart 1Seg watching.
- When i-αppli that cannot be used concurrently with recording is started (A confirmation screen for
watching and continuation of recording appears)
When selecting a link to 1Seg watching information displayed on a site or mail while
recording, select "Yes" on a confirmation screen to stop recording and start watching
the channel specified in the information for 1Seg watching. If the channel specified by
the information for 1Seg watching is the same as the one being recorded, recording
continues.
When the time for recording reservation comes while recording, recording
reservation starts. When the channel currently recording and the channel for
recording reservation are different, a confirmation screens for changing the channel
and starting recording reservation appears if Record setting of recording reservation
is "Operation".
When recording data broadcasting for later viewing, record it at least 1 minute or
more under good wave reception conditions. If the recording time is too short, data
broadcasting may not be displayed.
If FOMA terminal goes outside broadcasting service area immediately after starting
recording and the recording is stopped without receiving the airwave, the recorded
data may not be saved.
For some programs, movie and/or sound may be recorded from a point a little before
recording operation is done.
While performing a function that cannot be activated at the same time as recording,
a confirmation screen for interruption of operation and start of recording appears.
◆ Recording still image
･ Recording is unavailable during video recording or on a data broadcasting fullscreen.
282
On 1Seg watching screen, P
1Seg
When exceeding the savable number/area→P322
✔INFORMATION
･ When there is an incoming videophone or PushTalk call immediately after pressing
P, still images may not be recorded.
･ Subtitles or data broadcasting are not saved.
User setting
Making various settings related to 1Seg
watching
◆ Setting screen or sound
1 m [1Seg] 8
the required items
2 Set
Setting screen : 1eSet the required itemseC
Set Light setting, Display subtitle, Subtitle size, Subtitle language and
Incoming msg ticker.
･ If setting Display subtitle to "In silent mode", subtitle appears when "No"
is selected from a sound play confirmation screen appearing when
watching 1Seg in Silent mode.
･ For horizontal standard screen, the subtitle size remains unchanged.
･ By Incoming msg ticker , set if you display ticker according to Message
display setting of Receive display option or not display.
･ While watching 1Seg, setting can be made by m91
Setting sound : 2eSet the required itemseC
Set Switch sound and Main <> sub sound.
･ While watching 1Seg, setting can be made by m92
✔INFORMATION
･ Display light is not applied while 1Seg ECO mode is ON.
◆ Setting Data broadcasting 
･ If you reset permit status, a confirmation screen starts to be displayed when
displaying a site from data broadcasting.
1 m [1Seg] 83
F906i_E1kou
F906i.book
Page 283
Monday, April 21, 2008
10:59 PM
necessary operation
2 Perform
Setting connection timeout : 1e1-3
You can set a maximum waiting time for connection from data broadcasting
to a site.
･ These settings are reflected to i-mode Connection timeout.
Deleting information in the storage area : 3ePlace the cursor on affiliate
broadcasting station or individual enterprise and me1 or
2e"Yes"
･ When there are storage areas of individual enterprises, select an affiliate
broadcasting station.
･ When "Delete all items" is selected, perform authentication.
Resetting permit status : 4eAuthenticatee"Yes"
･ Set to display confirmation screens again for 1Seg watching, reserved
recording, etc.
◆ Setting actions when FOMA terminal is closed 
[1Seg] 84e1-3
1m
･ When "Continue" is selected, 1Seg watching or recording continues.
･ When "Mute" is selected, 1Seg watching continues with the sound silent.
･ When "Recep:End/REC:Cont" is selected, only 1Seg watching ends and
recording continues.
･ While watching 1Seg, setting can be made by m94
･ Close setting is applied also while playing the recorded video. Note that,
when "Mute" is selected, play is paused.
◆ Setting operations for recording 1Seg
[1Seg] 85eSet the required itemseC
1m
Set recording destination and Record time.
✔INFORMATION
･ With Close setting for data broadcasting and data broadcasting site set to "Continue"
･
or "Mute", information may be updated even when FOMA terminal is folded,
requiring packet communication fees.
Recording destination of Record setting is applied from the recording performed after
the setting. Record time is applied from the time of setting.
Remote controller with microphone
Using remote controller with microphone F01
You can use the switch of the remote controller with microphone F01 (optional)
to operate 1Seg watching.
R (In time shift fast forward play) : Time shift ordinary play
R (1 second or more)*1 : End 1Seg watching
+- : Adjust volume
+ (1 second or more) (while watching) *2 : Select next channel
+ (1 second or more) (In time shift play)*2 : Time shift fast forward play
- (1 second or more) (watching) *2 : Select previous channel
W (Slide in the direction of ▼) : Disable R, + and - keys.
W (Slide in the opposite direction of ▼) : Enable unavailable keys
*1 During data broadcasting site display, the site also ends. During recording, only watching
stops.
*2 This is available while data broadcasting site display.
FM transmitter
Listening to music of 1Seg with audio device or
car stereo
You can transmit the sound of 1Seg over FM radio wave and listen to it with home
audio device or car stereo.
･ Set recording destination from FOMA terminal or microSD card.
･ Record time is the time from starting recording or changing the setting of
recording until recording ends.
･ It is unavailable for recording reservation.
･ While watching 1Seg, setting can be made by m93
1Seg
283
F906i_E1kou
F906i.book
Page 284
Monday, April 21, 2008
10:59 PM
◆ Setting FM transmitter frequency 
･ Set a frequency not to overlap with FM radio stations in the area you use FOMA
terminal.
･ This setting is shared with FM transmitter for Playing music.
1 m [Settings & NW services] 18e1-9
◆ Transmitting sound of 1Seg over FM radio wave
1Seg watching screen or data broadcasting full-screen,
1 On
m6
･ On video play screen, press m5
Stopping FM transmission : On 1Seg watching screen or data broadcasting
full-screen, m6
･ On video play screen, press m5
✔INFORMATION
･ Because FM transmitter uses weak waves requiring no licenses for radio stations, the
･
･
･
･
･
284
sound may become noisy or interrupted by the installation conditions of the FM
transmitter and receiver devices, antenna positions and environmental conditions.
When there is such noise or interruption, change the direction of FOMA terminal for
the better sound. However, noise or interruption of sound may not be resolved by
changing FOMA terminal direction.
Obstacles, if any, between FM terminal and receiver device or metal pieces placed
near FOMA terminal may cause noise or interruption in sound.
FM transmission continues even when other functions are activated by Multitask.
Movies/i-motion or melodies, if any, played with other function use the speaker of
FOMA terminal, muting FM wave until the playing ends.
FM transmitter is also available out of service area. However, FOMA terminal must be
placed in FOMA service area at least once after turning ON.
When doing the things below during FM transmission, FM transmission is
interrupted.
- Connecting an earphone etc.
- Connecting an external device using USB cable
FM transmission is unavailable overseas.
1Seg
F906i_E1kou
F906i.book
Page 285
Monday, April 21, 2008
10:59 PM
Full Browser
Viewing websites for a PC ........................................................................................................................... Full Browser
Setting for Full Browser ......................................................................................................................................................
286
291
285
F906i_E1kou
F906i.book
Page 286
Monday, April 21, 2008
10:59 PM
Displaying from bookmark : 2eSelect a foldereSelect a bookmark to
display
Create or delete the folder to register a bookmark.→P163 Step 2 in "Creating/
Deleting folders"
Register bookmark to Access shortcuts.→P164 Step 2 in "Registering
bookmarks in Access shortcuts"
Connecting from Entry URL log : 32eSelect a URL
Operation from Entry URL log→P162
Connecting to Browser history : 4eSelect a URL
Operation from Browser history→P159
Full Browser
Viewing websites for a PC
You can connect to Internet to view websites created for a PC.
Framed, CSS and SSL/TLS supporting websites can also be viewed.
･ Communications of large-size data such as viewing websites containing many
images and downloading require high charges. For details of packet
communication fees and charging plans, refer to "Mobile Phone User's Guide [imode] FOMA version".
･ Full Browser supports the functions and technologies below.
Frame : A frame for dividing a web page or a website configured with frames. A
website with some frame configurations may not be fully displayed.
Cookie : A function that saves website-specified information such as the date
and time the website appears and the number of the times it is visited in
FOMA terminal. Based on such information, various functions on the website
can be easily used.
CSS : A standard that defines the layout of web pages.
JavaScript : A language for creating websites.
Referer : URL information of a website from which a link is selected to move to
a website specified in it.
SSL/TLS : A technology for securing safe data communications with
authentication/encryption. A website that supports SSL/TLS has URL
beginning with https://. In some cases, it is used in a part of a website.
 Connecting to website at specified address (URL)
1 I9
a URL (up to 512 one-byte characters)eC
2 31eEnter
･ When Access setting is set to "No" such as by default, the Access setting
screen appears.→P292
･ From the second time, the URL previously connected appears.
･ Press c or m9 to stop connecting or m8 to stop connecting
with multiple windows.
Connecting to Home : 1
Registering URL for Home connection→P291
286
Full Browser
3 After reading a website, fe"Yes"
✔INFORMATION
･ The functions below are not supported.
･
･
･
･
･
･
･
- Plug-in
- Saving screen memos
- Phone To (AV Phone To), SMS To, Media To
Some websites may take extra time to be displayed or not be displayed correctly.
When displaying a site including an image, the icons below may appear instead of the
image.
: When Set image display is "Not display" in Image&Effect settings
: When the image data is invalid or the image cannot be found, or when the image
cannot be received because FOMA terminal goes out of service area during
reception
: When the image cannot be displayed for an incorrect URL etc.
Mail To and Web To functions can be used from mail addresses and URL,
respectively.
The volume while playing Flash graphics can be adjusted by s84.
If no operations are performed for more than 5 minutes, playing Flash graphics ends.
Flash animation of Flash graphics is applicable to up to 1 Mbyte per page, and
Flash®Video is applicable to up to 10 Mbytes per item.
Applicable to files of up to version equivaleut for Flash8. Note that, ever for relevant
file, playing may be unavailable for some sites.
F906i_E1kou
F906i.book
Page 287
Monday, April 21, 2008
10:59 PM
◆ Viewing screen of Full Browser
Full Browser screen (Vertical display)
a Status display/Title or URL
(blue) : Obtaining
: Displaying frame thumbnail→P289
: In frame enlarged display→P289
(dark blue) : Obtaining another frame during enlarged display of current
frame
: Downloading PDF data, Word, Excel or PowerPoint files
: Uploading image or movie/i-motion
: Display mode (PC mode (full scale)/Mobile mode)→P291
: In Window Open Guard→P291
c Pointer→P288
d Section map
The current position relative to the whole display appears temporarily at
connection or scrolling screen (except in thumbnail display). The size of section
map of PC mode may change while downloading the page or vary by websites.
❖ Operations on Full Browser screen
Scrolling : k, 2, 4, 6, 8
･ Keys available for scrolling differ by the display mode.→P291
Displaying previous/next pages : I, a
･ The operation is available only in PC mode with the pointer hidden.
Zooming in/out : 1, 3
Switching pointer display/hide : #
･ Pointer display/hide→P288
In the horizontal display, switching displays with/without the guide area : *
･ When setting Screen view setting to "Full screen view", press * on the
vertical display to switch the guide area.→P292
Activating the selected link item with a new window : C36
･ Operation is available also by pressing 7.
Multi window→P289
Switching display mode : C4
Display mode setting→P291
Switching display magnification by zooming : C5e1-7
･ Operation is available also by pressing 5. Settings of zooming remain after
exiting Full Browser.
Performing search in page : C7
･ Operation is available also by pressing 0.
Search in page→P289
Displaying key function help : C8
Connecting to Home : m1
Registering the displayed website in bookmark : m21eSelect a folder
to register
Registering bookmark→P163
Displaying from bookmark : m22eSelect a folder
･ Operation is available also by pressing 9.
Displaying from bookmark→P163
Connecting by specifying URL : m31eEnter the URLeC
Connecting from Entry URL log : m32eSelect a URL
Connecting to Browser history : m33eSelect a URL
Reloading information : m4
Sending URL by mail : m6
The mail creation screen with the URL of the displayed website pasted is
displayed.
Full Browser
287
F906i_E1kou
F906i.book
Page 288
Monday, April 21, 2008
10:59 PM
Copying URL of a website : m81
The next procedure→P169
Copying URL of link destination : Select link destinationem82em
Copying/Pasting method→P383
Displaying certificate of SSL/TLS compatible page : While SSL/TLS page is
displayedm83
Certificate→P173
Performing Image&Effect settings : m84
Image&Effect settings→P292
Switching character encode : m851
･ Each time you press m851, character code is changed as SJIS→
EUC→JIS→UTF8. Press m852 to switch to "Auto switch".
Playing animation from the beginning by Retry : m86
Making Window open guard valid/invalid : m87e"Yes"
Script setting→P291
Checking section map : m88
Setting display or color of section map : m89e1-4
✔INFORMATION
･ When changing the display magnification by zooming while displaying multiple
websites with Multi window, the change applies only to the currently active window.
･ Operations for selecting link destinations displaying the pointer or items are the same
as those for i-mode.→P160
288
Full Browser
◆ Switching display of pointer
While displaying the pointer, you can move on a screen by operating the pointer
with k. Hold down to move quickly.
･ Settings of displaying/hiding the pointer remain after exiting Full Browser.
the Full Browser screen, #e"Yes"
1 On
If selecting "Yes", the pointer is hidden. To display it, press #.
･ If hiding the pointer while playing Flash, the play stops.
a Moving range
The pointer can be moved in this range. On some frames, the range the
pointer can move may be limited.
b Pointer
Link destination or item can be selected. When moving near the end of the
window, the screen scrolls.
･ The display of the pointer is switched as shown below by operation.
: Pointer mode ON
: Drag mode ON
: Obtaining data
: Selecting link
: Selecting link while obtaining data
: Selecting text box
c Displayed when the item can be selected by the pointer
･ You can switch displaying/hiding the pointer each time you press #.
F906i_E1kou
F906i.book
Page 289
Monday, April 21, 2008
10:59 PM
❖ Switching to drag mode for operation
◆ Displaying multiple websites 
You can switch to drag mode while pointer display to operate contents available
in drag mode.
･ Operations available in drag mode vary by contents.
pointer onto contentseg (1 sec. or more)
1 Move
Pointer changes from to , and you can operate contents with k.
You can view a website selected from up to 5 displayed websites.
 Displaying a website link on a new window
the Full Browser screen, place the cursor on the link and
1 On
C36
On stand-by
Canceling : g (1 sec. or more)
･ Pressing g also cancels.
Displaying
◆ Displaying a framed website
When a framed website appears, thumbnail screen appears allowing to view the
entire configuration. Individual frames can be enlarged for viewing.
the frame thumbnail screen, select a frame to enlarge
1 On
･ Use k to move the frame.
In thumbnail
display
In frame enlarged
display
･ Press side keys [▲▼] to switch windows. A window to switch to can be
selected from a window list display by pressing side keys [▲▼] for 1
second or more or pressing C1.
･ To close the current window, press C2 and select "Yes".
◆ Searching the character string on website
･ Search method is set to "Partial match", and Case-sensitive is set to "No" by
default.
･ Press c to return to the frame thumbnail screen.
✔INFORMATION
･ Frames requiring authentication appear with a yellow border and those with problem
elements detected by Scanning function appear with a red border.
･ While displaying frame thumbnail, the operations and settings below are
unavailable.
- Displaying pointer on the frame thumbnail screen
- Scrolling screen
- Search in page
- Save image, PDF data, Word, Excel or PowerPoint files
- Link display
- Section map check/setting
Full Browser screen, 0eEnter characters in the search field
1 On
(up to 20 two-byte (40 one-byte) characters)
The set character string is searched for and character strings matching the
entered string are highlighted.
･ Press I to move to the previous option and a to move to the next
option (matched string).
･ Press C to end searching.
Setting search method : On Full Browser screen, 0emeSet the
required itemseC
Search method : Select "Partial match" or "Exact match" for Search method.
Case-sensitive : Select if you make case-sensitive search.
✔INFORMATION
･ Some websites may not be searched.
･ When the search result and search fields are overlapped, press C for viewing.
Full Browser
289
F906i_E1kou
F906i.book
Page 290
Monday, April 21, 2008
10:59 PM
◆ Uploading images or movie/i-motion
You can upload images in GIF or JPEG format or movie/i-motion in MP4 format
saved in FOMA terminal to a website.
･ The file size of an image or movie/i-motion that can be uploaded is up to 2,048
Kbytes, and when multiple images or character strings are included, it is up to
2,128 Kbytes.
the Full Browser screen, "Browse"
1 On
The next procedure→P169 Step 2 and the following steps in "Uploading
image or movie/i-motion to sites"
･ "Browse" button appears when FOMA terminal can upload images or
movie/i-motion. It appears as a different mark when displaying the same
website on a PC etc.
✔INFORMATION
･ Procedures for uploading vary by websites.
･ You cannot upload images, movie/i-motion inhibited to output from FOMA terminal
or data except character strings.
･ Movie/i-motion of ASF format or those partially obtained cannot be uploaded.
◆ Downloading images
You can save images in GIF, JPEG, PNG or BMP format displayed on websites.
･ An image file of up to 1 Mbytes is savable.
･ PNG and BMP format images can be saved in "Other" folder of microSD card,
but cannot be displayed.
･ Savable number→P471
the Full Browser screen, m5eSelect an image to save
1 On
The next procedure→P166 Step 2 and the following steps in "Downloading
images"
･ When placing the cursor on the image to save, the image is surrounded by
frame and the file name and the file size displayed.
✔INFORMATION
･ Background images cannot be downloaded.
･ Images with horizontal and vertical (or vice versa) sizes larger than 864×480 in GIF
×
･
･
format or 1,728 2,304 in JPEG format cannot be saved in FOMA terminal. Some
images cannot be saved by the JPEG type.
Even a file of an allowable file type and size may not be saved from some websites.
When exceeding the savable number/area→P322
◆ Downloading PDF data, Word, Excel or PowerPoint
files
You can save PDF data, Word, Excel and PowerPoint files displayed on websites.
･ A data file of up to 1 Mbytes is savable.
･ Word, Excel or PowerPoint files can be downloaded only when microSD card is
installed.
･ File of Word 2007, Excel 2007 or PowerPoint 2007 cannot be saved in FOMA
terminal.
the Full Browser screen, select data to download
1 On
･ You can stop downloading by pressing c or m9 and selecting
"Yes". You can stop downloading all data with multiple windows by
pressing m8.
2 "Save"
Displaying : "Preview"
Canceling saving : "Back"e"No"
the display name (up to 36 characters)eC
3 Enter
･ When "
" appears in the lower-left corner of the guide area, the save
destination can be switched by pressing I.
･ PDF data is saved in "i-mode" folder of My Document in FOMA terminal or
"My Document" folder in microSD card.
･ Word, Excel or PowerPoint files are saved in a folder of Other in FOMA
terminal or "Other" folder in microSD card. If Other in FOMA terminal has
multiple folders, a screen appears asking to select a saving folder. The files
are saved to a selected folder.
290
Full Browser
F906i_E1kou
F906i.book
Page 291
Monday, April 21, 2008
10:59 PM
✔INFORMATION
･ Downloading stops when the data size exceeds 1 Mbytes while downloading.
･ When exceeding the savable number/area→P322
Setting for Full Browser
You can set various functions for Full Browser.
◆ Registering URL for Home connection 
･ The URL for Google website is entered by default.
◆ Making Script settings