Fujitsu FOMA-F906I Part 15 Low Power Communication Device Transmitter User Manual F906i

Download:
Mirror Download [FCC.gov]
Document ID	946665
Application ID	7X917yHjoTLz03C91pevGQ==
Document Description	manual 9
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	194.11kB (2426368 bits)
Date Submitted	2008-05-27 00:00:00
Date Available	2008-05-27 00:00:00
Creation Date	2008-05-23 14:00:12
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2008-05-23 14:00:22
Document Title	F906i.book
Document Creator	PScript5.dll Version 5.2
Document Author:	DocMaker

F906i_E1kou
F906i.book
Page 375
Monday, April 21, 2008
10:59 PM
◆ Making/Receiving calls by pressing switch 
 Making a voice call
Press the switch (1 sec. or more) until you hear 2 short
beepseWhen ending the call, press the switch (1 sec. or more)
until you hear a short beep
 Receiving a voice call
When there is an incoming call, press the switch (1 sec. or more)
until you hear 2 short beepseWhen ending the call, press the
switch (1 sec. or more) until you hear a short beep
✔INFORMATION
･ When the phonebook No. of Headset key control contains multiple phone numbers,
the voice call is made to the first phone number saved.
･ When the phonebook entry of the phonebook No. in Headset key control is deleted,
overwritten by another phonebook entry, or its phonebook No. is switched, Headset
key control is canceled.
･ In reply to a videophone call received, a camera image is sent if FOMA terminal is
open or a substitute image is sent if FOMA terminal is folded.
･ When Call waiting service is active, you can answer another incoming voice call by
pressing and holding the switch for 1 second or more. While Call waiting is active, a
party you talk to can be switched by pressing and holding the switch for 1 second or
more.

･ The call can be continued regardless of Close settings.
･ A substitute image appears on the terminal of the other party during a videophone
call.
◆ Answering call automatically with earphone
connected 
Set if you automatically answer if there is an incoming call while Flat-plug
Earphone/Microphone with Switch is connected.
･ This function is unavailable to incoming calls during another call.
･ This function is not available in Public mode.
[Settings & NW services] 542eSet the required
1m
itemseC
Auto answering : Setting to "ON" allows you to automatically answer while
Flat-plug Earphone/Microphone with Switch is connected.
Delayed time(Sec) : Set time before automatically answering an incoming call
in the range of 0-120 seconds.
✔INFORMATION
･ When a videophone call has been answered by Auto answer, a substitute image is
sent and a videophone call is automatically started.
･ With Delayed time set within the time of Ring alert delay, this function does not
operate when a call is received from a caller not saved in phonebook.
◆ Hearing the ring tone only through the earphone

By connecting Flat-plug Earphone/Microphone with Switch, you can set to hear the
ring tone through both headset and speaker or only through the headset.
･ Alert tones such as Charge alert, GPS alert or Alarm sound operates according
to this setting.
& NW services] 541e1-3
1 ･mWith[Settings
"HS, + SP after 20sec" set, the ring alert is emitted from the speaker
about 20 seconds after the ring alert is emitted only from the earphone.
Confirm
Confirming current settings of functions
[Settings & NW services] 764eh to check the
1m
settings
✔INFORMATION
･ In Personal data lock, the set conditions for locked items are displayed as "---".
･ In Privacy mode ("Authorized access" set for My Picture or i-motion), authentication
is required.
Convenient Functions
375
F906i_E1kou
F906i.book
Page 376
Monday, April 21, 2008
10:59 PM
Reset
Resetting functions
You can restore the functions of blue characters on the menu list to default
settings.→P416
･ The functions below and data items are restored to their default settings, though
they are not listed in "Menu list".
- Preferences : Silent mode, Public mode (Drive mode), Setting of Kisekae Tool/1Seg,
confirmation display settings of Data broadcasting, keyword log/search screen of Quick
search, call cost icon, input log of pictogram/symbol/smiley, Set auto-update of Software
update
- Full Browser Settings : Cookie data, showing/hiding pointer, switching display
magnification, Section map colors, setting search condition of character strings,
confirmation screen for connecting displayed when performing Full Browser search of
quick search
- Predict dict. data : Data saved using the input prediction function
- Pedometer settings : Steps and walking distance of the day
m [Settings & NW services]
767eAuthenticateeSelect an item to
reseteCe"Yes"
✔INFORMATION
･ When i-mode preferences is reset, the i-Channel ticker does not appear on the standby display. Displaying i-Channel list by pressing c on the stand-by display starts
receiving the latest information and displaying a ticker on the stand-by display.
Delete all data
Deleting saved data all at once
Delete the saved or registered data, and restore the settings of each function to
default.
･ The protected data is also deleted.
･ All settings or data are deleted regardless of the 2in1 mode.
･ The data below are not deleted. Also, default settings are not restored.
- Data stored by default
- Data saved, registered or set in FOMA terminal and the microSD card
- Osaifu-Keitai compatible i-αppli that data is saved
376
Convenient Functions
- Data communication settings set from a PC
- Network search mode
- 3G/GSM setting
･ i-αppli saved by default are as shown below.
- "iD 設定アプリ (iD setting application)" is not restored to default settings or deleted.
- "DCMXクレジットアプリ (DCMX Credit service application)" is deleted when no data is
saved.
- i-αppli other than "iD 設定アプリ (iD setting application)" or "DCMXクレジットアプリ
(DCMX Credit service application)" are restored to the default settings. Note that they are
deleted when upgraded.
･ When data is saved in IC card, IC owner is not reset.
･ If "Welcome F906i
" saved in "Inbox" folder is deleted, it is saved again.
[Settings & NW services]
1m
768eAuthenticatee"Yes"
Delete all data is performed while restarting.
✔INFORMATION
･ When restarting after this function is performed, the same screen as that for the first
･
･
activation of the terminal appears (AdvancedMode setting appears only when the
confirmation screen is closed without any settings).→P48
When deleting a large size of data, restarting may take approximately 1 minute. Be
careful not to turn the power OFF before deletion completes.
Execution of this function disables automatic reception of Music&Video Channel
programs. To enable automatic reception of programs again, perform Set program of
Music&Video Channel.
F906i_E1kou
F906i.book
Page 377
Monday, April 21, 2008
10:59 PM
Character Entry
Entering characters .............................................................................................................................................................
Entering characters using 5-touch input method ...................................................................... 5-touch input method
Entering characters using useful entry function ..............................................................................................................
Saving fixed phrase ....................................................................................................................................... Save phrase
Copying/Cutting and pasting characters ..........................................................................................................................
Entering characters using KUTEN code ........................................................................................... KUTEN code input
Saving frequently used words ....................................................................................................................... Save word
Registering passwords in advance .................................................................................................. Password manager
Using downloaded dictionary .................................................................................................................... DL dictionary
Entering characters using 2-touch input method ...................................................................... 2-touch input method
Setting input method ......................................................................................................................... Text input method
378
379
380
382
383
384
384
385
385
385
386
For details of Kuten Code List, refer to "Kuten Code List" (PDF version) in the attached CD-ROM or on DoCoMo
website.
To view PDF version of "Kuten Code List", Adobe® Reader® is required. If not installed in your PC, install Adobe®
Reader® from the attached CD-ROM. For details of usage, refer to "Adobe Reader Help".
377
F906i_E1kou
F906i.book
Page 378
Monday, April 21, 2008
10:59 PM
◆ Changing input modes
Entering characters
Procedures for entering characters below.
･ There are 2 methods for entering characters : 5-touch input method and 2-touch
input method.→P379, 385
･ The font types below can be entered. Two-byte characters (hiragana/kanji/
katakana/alphabetic characters/numbers/symbols/pictograms) and one-byte
characters (katakana/alphabetic characters/numbers/symbols). 1 two-byte
character, space or line feed is counted as 2 one-byte characters. Voiced sound
and semi-voiced sound one-byte characters are also counted as 1 character.
･ A total of 6,355 JIS level 1 and level 2 characters can be entered.
･ Complex characters may be displayed in a simplified form.
･ In this manual, "enter" means entering characters and pressing g.
There are 2 kinds of character entry screens : in-line entry mode and full-screen
entry mode.
In-line entry : Place the cursor on the field without switching screens and enter
characters directly.
Full-screen entry : Select the field to display the full-screen entry area.
･ When fixed phrases pasted or entered exceed the allowable number of entered
characters, the excessive characters are deleted.
(one-byte numbers)→
(one-byte alphabets).
One-byte numbers
a It shows that switching two-byte/one-byte characters is available by
pressing j.
b The item at the cursor is highlighted.
･ You can also press h to switch the input mode.
2 Place the cursor on the item to switch and g
Items
5-touch input method 2-touch input method
Input mode
*1
Hiragana/Kanji character
*1
One-byte katakana
*1
One-byte alphabetic
characters
*2
Full-screen entry
a Input mode
b Cursor (blinking)
Indicate location where characters are entered or inserted. Use h to move the
cursor.
c Entry range
This icon indicates limitation of entry area.
･ For the field to enter date and time etc., you may be able to enter numbers by
pressing j.
Character Entry
(one-byte katakana)→
*2
378
(hiragana/kanji)→
❖ Available items and input modes
◆ Character entry screen
In-line entry
the character entry screen, I
1 On
･ Each time you press, the input mode switches as
One-byte numbers
*1
Two-byte katakana
*1
Two-byte alphabetic
characters
*2
*2
Two-byte numbers
*1 You can also press 80 to switch upper and lower cases.
*2 Even in 2-touch input, it becomes 5-touch input operation.
･ The available input modes vary by the character entry screen.
･
appears when entering readings of a saved word.
F906i_E1kou
F906i.book
Page 379
Monday, April 21, 2008
10:59 PM
5-touch input method
Entering characters using 5-touch input method
In 5-touch input method, multiple characters are assigned to each key and the
character is switched every time a key is pressed.
･ List of character assignments→P430
･ When characters are entered, the cursor moves rightward after approximately 1
second. The number of seconds before moving the cursor can be changed in
Text input method.→P386
◆ Entering characters 
 Entering "企業 (kigyou)" in phonebook
[Phonebook & Logs] 2eI twice to switch to the kanji/
1m
hiragana mode eEnter "きぎょう"eC
"き" : 2 (twice)
"ぎ" : When the cursor moves to the right, 2 (twice)e*
"ょ " : 8 (3 times)e*
"う" : 1 (3 times)
･ During character entry, the operations below are available.
n : Return to the previous character.
(e.g. : ぉ→ぇ→ぅ→ぃ→ぁ→お→え→ …)
c : Cancel entered characters.
* : Add voiced/semi-voiced sound, switch upper/lower case and insert
a line feed (only after the entry is fixed).
(e.g. : ほ→ぼ→ぽ→ほ→ …, つ→っ→づ→つ→ …)
･ You can also press j to convert text when an option selection list is not
displayed.
･ Press c to restore the entry before conversion.
･ To leave hiragana unconverted, go to Step 2 without pressing C.
Displaying conversion options list :
When pressing C fails to display the preferred character, a conversion
options list appears by pressing j or pressing C again.
Displaying kana options list :
While entering hiragana characters, press m to display a list of kana
characters, dates, times, etc.
･ When there are multiple pages, press I or a to switch pages. Press the
key for the option or press j to select options.
(Close)"
2 ge"閉じる
Inserting characters :
Press k to move the cursor to the insertion point and enter the character. The
entered character is inserted at the cursor position.
Deleting characters :
･ When the cursor is inside an entered character string
(eg. : ドコモ 太 郎)
- Press c to delete 1 character at the cursor position.
- Press and hold c for 1 second or more to delete the character at the cursor position
and all other characters after the cursor position.
･ When the cursor is at the end of an entered character string
(eg. : ドコモ太郎 )
- Press c to delete 1 character to the left of the cursor.
- Press and hold c for 1 second or more to delete all entered characters.
Entering line feed :
Move the cursor to the location to insert a line feed and press *. When the
cursor is at the end of entered characters, you can also press d to insert a
line feed.
･ Some fields may not permit a line feed.
Restoring the character string to the previous state :
Press n for 1 second or more.
･ Operation is available only on the message text/Edit signature entry screen
or message text entry screen for SMS.
✔INFORMATION
･ Pressing n after entering voiced/semi-voiced sound does not bring back the
previous character.
･ When the cursor has been moved rightward by pressing r during character entry,
the operations below are unavailable.
* : Add voiced/semi-voiced sound and switch upper/lower case.
n : Return to the previous character.
Character Entry
379
F906i_E1kou
F906i.book
Page 380
Monday, April 21, 2008
10:59 PM
･ You can enter readings in hiragana and convert them to alphabetic characters, Greek
characters, etc.→P441
2 deSelect the optioneg
❖ Block conversion of multiple clauses
･ Converted within 24 two-byte characters.
 Entering "イタリア料理を食べにいこう。(Let's go to eat Italian
food.)"
Option selection list
Convert
All OK
Fix converted portion
h*
Change conversion range
･ When there are multiple pages, press I or a to switch pages.
3 "閉じる (Close)"
❖ Resetting prediction
* The screen shows the example of l.
You can reset data saved as Predict dict. data in the options selection list to default.
◆ Entering characters using input prediction function
[Settings & NW services]
1m
733eAuthenticatee"Yes"
The input prediction function displays a list of the word selection options that
match first part of the reading of the entered characters when entering characters
in hiragana/kanji mode. Input prediction function automatically saves previously
entered characters in the option selection list as Predict dict. data; you can easily
enter the same characters next time, quickly by entering only the first part.
･ The words below appear in addition to the Predict dict. data.
- Words stored by default
- Words saved as words
- Words selected from DL dictionary
･ Input prediction function can be used only in the hiragana/kanji mode with fullscreen entry.
 Selecting and entering "明日 (asu)"
"あ (a)" on the character entry screen
1 Enter
･ The option selection list appears. Options change as entered characters
increase.
380
Character Entry
Entering characters using useful entry function
You can enter pictograms, symbols or fixed phrases, or quote data from the
submenu of the character entry screen.
･ The submenus do not appear before characters are set or on the decoration
selection screen of Deco-mail. On the in-line entry screen, the submenu appears
when the entry is fixed.
F906i_E1kou
F906i.book
Page 381
Monday, April 21, 2008
10:59 PM
b Pictogram and symbol list
Only supported symbols appear.
･ Each time you press C, the pictogram list switches in the order of
Pictogram D→Pictogram 1→Pictogram 2. On a pictogram list of Pictogram
D, images saved in "Deco-mail pict" folder are displayed. Select a Deco-mail
pictogram to enter it. Note that, each time you press C on the text entry
screen, you can switch only Pictogram 1 and 2.
Downloading Deco-mail pictogram→P166
･ Press m to enter symbols. Each time you press the key, switches two-byte
and one-byte symbols.
･ When there are multiple pages, press I or a to switch pages.
◆ Entering fixed phrases
･ List of fixed phrases→P432
1 On the character entry screen, m41e1-8
･ After fixed phrases are saved, 9 becomes available.
･ Press m51 on the message text entry screen.
2 Select a fixed phrase
a pictogram to enter
2 Select
Press c to close the pictogram list.
･ In the input log field, up to 10 items (13 items for wide display) from the
latest entry are displayed, allowing to select characters from the list.
◆ Entering pictogram and symbol
･ Symbol list→P435
･ Pictogram list→P436
 Entering Pictogram D
1 Press C on the entry screen of message text or signature editing
✔INFORMATION
･ Pictograms and symbols can be converted also by entering readings.→P436, 441
･ Pictograms and symbols transferred via infrared communication may not appear
correctly.
･ A pictogram or symbol can be entered also by selecting "Pict/Symbol/Smiley" →
･
a Input log field
Displayed on the first page of the pictogram list of Pictogram D, Pictogram
1 and Pictogram 2, and on the first page of the symbol list of one-byte/twobyte symbols.
･
･
"Pictogram" or "Symbol" on the submenu of the character entry screen. At this time,
press C to display a continuous input field above the input log field, and up to 10
pictograms, 10 two-byte (20 one-byte) symbols can be selected continuously. Note
that no continuous input field is displayed for Pictogram D.
If "Deco-mail pict" folder contains no images, a blank pictogram list appears when
trying to display Pictogram D on the entry screen of message text or signature editing.
Deco-mail pictogram can be inserted also by pressing m on the entry screen of
message text or signature editing, and selecting "Decorate mail" → "Insert image" →
"Phone memory" or "microSD".
When selecting "Pict/Symbol/Smiley" → "Symbol" on the submenu of character entry
screen, selecting a left parenthesis (such as {) causes the associated right parenthesis
(such as }) to be automatically entered.
Character Entry
381
F906i_E1kou
F906i.book
Page 382
Monday, April 21, 2008
10:59 PM
◆ Entering smileys
❖ Quoting user information data
･ Smiley list→P444
the character entry screen, m45eAuthenticate
1 On
･ Press m55 on the message text entry screen.
1 On the character entry screen, m53e2-9
2 Select the user information data to quote
❖ Quoting calculation results on Calculator
the character entry screen of Notepad or Scheduler,
1 On
m46eMake a calculationeg
･ Press m63 on the message text entry screen.
･ Pressing 1 displays a list of up to 18 items beginning with the latest one
entered from input log of smiley list.
Select Smileys
◆ Quoting data to enter characters
Characters can be entered by quoting password saved in Password manager,
phonebook data, user information, the calculation results on Calculator or
character string of the data scanned with Bar code reader.
･ Other data can be quoted except when a character entry screen and quoted data
have the same function (such as phonebook data on a phonebook character
entry screen).
❖ Quoting password data
the character entry screen, m43eAuthenticate
1 On
･ Press m53 on the message text entry screen.
2 Select password data to quote
❖ Quoting phonebook data
the character entry screen, m44eSelect phonebook
1 On
entry to quote
･ Press m54 on the message text entry screen.
382
Select the data to quote
Character Entry
❖ Quoting data scanned with Bar code reader
the URL entry screen, m46
1 On
･ They can be used from the character entry screen during i-mode or Full
Browser connection.
Scan a codeeg
Save phrase
Saving fixed phrase
･ Up to 50 items can be saved.
[Settings & NW services] 7349e""
Deleting the saved fixed phrases : Place the cursor on the fixed phrase and
me"Yes"
･ To check the fixed phrase already saved, place the cursor on the phrase to
check and press C. Edit it by pressing g.
2 Enter the phrase (up to 64 two-byte (128 one-byte) characters)
3C
Phrases are saved in "My phrase".
･ When editing a saved fixed phrase, a confirmation screen appears. Select
"Yes" to replace or "No" to cancel the operation.
F906i_E1kou
F906i.book
Page 383
Monday, April 21, 2008
10:59 PM
❖ Saving words during character entry
Copying/Cutting and pasting characters
the character entry screen, m62
1 ･OnPress
m72 on the message text entry screen.
･ Only the last item of the copied or cut characters are recorded until the power is
2 Selecting a whole sentence : megeGo to Step 4
◆ Copying/Cutting characters
Select the start point
･ On the message text entry screen, press a to select the whole sentence.
Go to Step 4.
the end point
3 Select
The characters in the selected range are displayed on the edit phrase screen.
Selecting from the start position to the beginning of the sentence : meg
Selecting from the start position to the end of the sentence : Ceg
4C
✔INFORMATION
･ If a blank is included in the character string in the selected range, the operation below
･
is performed.
Blank spaces only : Cannot be saved as a fixed phrase.
Blank spaces before and after a character string : Only character string is available.
Blank spaces between characters : Blank spaces are also available.
To save a new phrase when 50 fixed phrases are already saved, delete or edit one of
the saved fixed phrases in the list.
turned OFF, and they can be pasted any number of times.
entry screen, m1 or 2
1 ･OnOnthethecharacter
message text entry screen, press m31 to copy or
m32 to cut.
2 Selecting the whole sentence : meg
Select the start point
･ On the message text entry screen, press a to select the whole sentence.
the end point
3 Select
The characters in the selected range are copied or cut.
Selecting from the start position to the beginning of the sentence : meg
Selecting from the start position to the end of the sentence : Ceg
Searching the specified character : Place the cursor on the end position and
I.
Quick search starts.
･ Operation is unavailable on the message text entry screen.
◆ Pasting characters
･ When the pasted phrase exceeds the permitted number of characters, a
message appears indicating not all characters can be pasted. Select "Yes" to
paste the phrase with excessive characters deleted.
the character entry screen, place the cursor on the position to
1 On
paste characters and m3
The characters are inserted at the cursor position.
･ Press m4 on the message text entry screen.
Character Entry
383
F906i_E1kou
F906i.book
Page 384
Monday, April 21, 2008
10:59 PM
✔INFORMATION
･ When the type of the copied/cut characters matches with the character type used of
･
the paste destination field, pasting is available. Hiragana or kanji cannot be pasted
into the mail address entry field.
When a character string containing a line feed is pasted into the entry screen that
cannot contain any line feeds, the line feed is replaced by a blank.
KUTEN code input
Entering characters using KUTEN code
Characters, numbers and symbols on the Kuten code list can be entered using 4digit code.
･ For "Kuten Code List", refer to PDF version "Kuten Code List" in the CD-ROM
attached.
 Entering "〒" (code number 0209)
the character entry screen, m42eEnter the 4-digit
1 On
Kuten code (0209)eg
･ Press m52 on the message text entry screen.
Saving frequently used words
Saving frequently used words makes it easy to produce them during character
conversion.
･ Up to 200 items can be saved.
m [Settings & NW services] 731e""
a Select when saving new word
b Icon indicating the beginning of the line
c Saved words
Listed in the order of the Japanese syllabary.
･ To check the saved word, place the cursor on the word and press C. Edit
it by pressing g.
384
Character Entry
"Delete". Select "Delete all" to delete all saved words.
the reading in the reading field (up to 8 characters in
3 Enter
hiragana)
Enter the word to register in the word field (up to 12 two-byte (24
one-byte) characters)
･ The word with the characters below entered at the beginning cannot be
saved.
- を, ん, ぁ , ぃ , ぅ , ぇ , ぉ , っ , ゃ , ゅ , ょ , ゎ , ゛(Voiced sound), ゜(Semi-voiced
sound), ー (Long vowels)
･ Any blank spaces entered are deleted after saving.
4C
･ When editing a saved word, a confirmation screen appears. Select
"Overwrite" to overwrite to the original word or "New" to save as a new
word leaving the original word.
❖ Saving words during character entry
the character entry screen, m61
1 On
･ Press m71 on the message text entry screen.
Save word
･ To delete a word, place the cursor on the word and press m, and select
the start point
2 Select
Selecting a whole sentence : megeGo to Step 4
･ On the message text entry screen, press a to select the whole sentence.
Go to Step 4.
the end point
3 Select
The characters in the selected range are displayed on the word entry field.
Selecting from the start position to the beginning of the sentence : meg
Selecting from the start position to the end of the sentence : Ceg
4 Enter the readingeC
✔INFORMATION
･ To save a new word when 200 words are already saved, delete or edit one of the saved
words in the list.
F906i_E1kou
F906i.book
Page 385
Monday, April 21, 2008
10:59 PM
･ When a character string containing a line feed is selected, the line feed is replaced by
a blank.
Password manager
Registering passwords in advance
With authentication information such as user names and passwords registered,
you can quote and enter saved information to a site or website that requires such
information.
･ Fingerprint authentication must be available to use Password manager.→P118
･ Quoting registered password→P382
･ Up to 50 items can be registered.
1 m [Settings & NW services] 48eAuthenticate
2C
Deleting 1 item : Place the cursor on the password and m2e"Yes"
Deleting selected items : m3eSelect the passwordseCe"Yes"
Deleting all items : m4e"Yes"
Changing the order : Place the cursor on the password and m5 or 6
the title in the title field (up to 12 two-byte (24 one-byte)
3 Enter
characters)
the password in the password field (up to 64 two-byte (128
4 Enter
one-byte) characters)
5C
❖ Saving words during character entry
the end positioneAuthenticate
3 Select
The characters in the selected range are displayed in the password entry field.
Selecting from the start position to the beginning of the sentence : meg
Selecting from the start position to the end of the sentence : Ceg
a title nameeC
4 ･Enter
Passwords are displayed in the order they are saved.
DL dictionary
Using downloaded dictionary
You can set words saved in downloaded dictionaries for conversion to Japanese
to be displayed as conversion options.
･ Up to 5 items can be used simultaneously.
･ Downloading dictionaries→P168
[Settings & NW services] 732eSelect the
1m
dictionary to useeC
2-touch input method
Entering characters using 2-touch input method
･ Set the input method to 2-touch input.→P386
･ Keypads and character assignments (2-touch input method)→P431
･ When 2-touch guide is "ON", guidance is displayed only on the horizontal
display.→P386
･ Even with 2-touch guide set to "ON", no guidance appears during in-line entry
or 1Seg display. And, guidance does not appear by some functions.
You can select entered characters and save them as a password.
entry screen, m63
1 ･OnOnthethecharacter
message text entry screen, press m73.
the start position
2 Select
Selecting a whole sentence : megeGo to Step 4
･ When selecting the whole sentence from the message text entry screen,
press a, perform authentication and go to Step 4.
Character Entry
385
F906i_E1kou
F906i.book
Page 386
Monday, April 21, 2008
10:59 PM
 Entering "企業 (kigyou)" in phonebook
❖ Changing settings during character entry
･ The settings cannot be changed before fixing characters or on the decoration
m [Phonebook & Logs] 2eEnter "きぎょう"
selection screen of Deco-mail.
･ During in-line entry, you can switch input modes or input methods, and change
Auto cursor.
2-touch guide on horizontal display
"き" : 22
"ぎ" : 2204
"ょ " : 8085
"う" : 8013
･ During character entry, the operations below are available.
* : Add voiced/semi-voiced sound, switch upper/lower case or insert a
line feed (only after the entry is fixed).
･ Some fields may not permit a line feed.
Text input method
Setting input method
m [Settings & NW services] 735eSet the required
1 itemseC
Input method : Set to "5-touch" or "2-touch".
Input prediction : Set if you display the option selection list.
Auto cursor : Set the time period before the cursor to move to the right
automatically.
･ Setting "OFF" disables automatic movement of the cursor.
･ Setting "Slow" moves the cursor in approx. 1.5 seconds.
･ Setting "Normal" moves the cursor in approx. 1 second.
･ Setting "Fast" moves the cursor in approx. 0.5 seconds.
2-touch guide : Set if you display 2-touch guidance in horizontal display.
386
Character Entry
the character entry screen, m7e1-3
1 On
･ 4 can be selected during 2-touch input.
Press m8 on the message text entry screen.
To switch "Use 2-touch" and "Use 5–touch", press 1.
To switch Prediction ON/OFF, press 2.
To set the time period before Auto cursor moves, press 3 and set the
time by pressing 1-4.
･ To switch 2-touch guide ON/OFF, press 4.
･
･
･
･
✔INFORMATION
･ When entering 2 characters both assigned to the same key successively with Auto
cursor set to "OFF", enter the first character, press r to move the cursor rightward
and enter the next character. To enter "あい", press 1r11.
F906i_E1kou
F906i.book
Page 387
Monday, April 21, 2008
10:59 PM
Network Services
Voice Mail service ..........................................................................................
Call waiting ....................................................................................................
Call forwarding service ..................................................................................
Nuisance call barring service ........................................................................
Caller ID request service ...............................................................................
Dual network service .....................................................................................
Switching language for voice prompts ........................ English guidance
Service Dialing Number ................................................................................
Set arrival act .................................................................................................
Selecting how incoming calls are handled while talking
................................................................................................. Arrival call act
Setting Remote control ..................................................... Remote control
Multi number ..................................................................................................
2in1 ..................................................................................................................
OFFICEED ........................................................................................................
Registering new network services
............................................................ Additional service (Register USSD)
388
389
390
391
391
392
392
392
392
393
393
393
394
397
398
Network services available
･ You can use the DoCoMo network services below with FOMA terminal.
Service
Voice Mail
service
Call waiting
Call
forwarding
service
Application
Monthly
fee
Service
Application
Monthly
fee
Required
Charged
English
guidance
Not
required
Free
Required
Charged
Multi
number
Required
Charged
Required
Free
Required
Charged
Service
Application
Monthly
fee
Nuisance
call barring
service
Not
required
Free
Caller ID
request
service
Not
required
Dual
network
service
Required
Free
Application
Monthly
fee
OFFICEED
Required
Charged
Public
Mode
(Drive
mode)*1
Not
required
Free
Not
required
Free
Required
Charged
Service
Public
Mode
(Power
Charged OFF)*1
Melody Call
*2
*1 Public Mode→P65, 66
*2 Melody Call→P98
･ Network services are not available out of service area or where radio
waves are hard to reach.
･ Contact the phone number for "General Inquiries" on the back of this
manual for applications and inquiries.
･ "OFFICEED" is a service requiring subscription. For details, refer to
DoCoMo's business website (http://www.docomo.biz/d/212/).
･ This manual describes the outline of network services from the aspect of
the operation procedure using Menu on FOMA terminal. For details, refer
to "Mobile Phone User's Guide [Network Services]".
2in1
387
F906i_E1kou
F906i.book
Page 388
Monday, April 21, 2008
10:59 PM
Menu items
Voice Mail service
If there is an incoming voice or videophone call while FOMA terminal is in a
location where radio waves are hard to reach or is powered OFF or if you do not
answer the call within the specified ring time, this service answers the caller with
a reply message and stores a voice message for you.
･ To give priority to Voice Mail service with Answer machine active, set ring time
for Voice Mail service which is shorter than a response time for Answer
machine.
･ When an incoming voice or videophone call is not answered with Voice Mail
active, it is recorded as a missed call and
(The digit indicates the number
of missed calls) appears on the stand-by display.
･ To change videophone call settings for Voice Mail service, make a voice call at
"1412".
･ When a new voice message is received from a videophone call, it is notified with
SMS.
･ When connected to the Voice Mail service center using Chara-den, DTMF
operation is unavailable. Operate by switching to Send DTMF from submenu.→
P59
❖ Basic flow of Voice Mail service
Step 1 : Activate the service.
Step 2 : The caller leaves a voice message.
Step 3 : Play the voice message.
a Activate
e"Yes"e"Yes"eEnter ring time
･ In B mode, ring time cannot be set.
Dual mode :
e"Number A" or "Number B"e"Yes"e"Yes"eEnter
ring time
･ For "Number B", ring time cannot be set.
b Set ring time
e"Yes"eEnter ring time
･ When ring time is "0 Sec.", incoming calls are not
recorded in Received calls.
c Deactivate
e"Yes"
Dual mode :
e"Number A" or "Number B"e"Yes"
d Check setting
e"Yes"
･ Settings can be changed from the submenu on the
state request screen.
Dual mode or B mode :
e"Number A" or "Number B"e"Yes"
･ For Number B, only activation/deactivation can be
confirmed.
e Play messages
e"Yes"eFollow the voice prompts
･ The number displayed on
shows the number
of new voice messages announced before new voice
messages are played. The number of saved voice
messages is not contained.
Dual mode :
e"Number A" or "Number B"e"Yes"eFollow the
voice prompts
f Voice Mail setting
Set up Voice Mail service by voice prompts below.
e"Yes"eFollow the voice prompts
Dual mode :
e"Number A" or "Number B"e"Yes"eFollow the
voice prompts
g Check messages
Check for voice messages.
e"Yes"
m [Settings & NW services] 81eOperate by selecting a
1 menu
item
･ When 2in1 is ON, activation, deactivation, playing and setting of Voice Mail
service can be set for Number A and B respectively. You can make settings
for Number A in A mode and for Number B in B mode and select one of
numbers to be set in Dual mode. Other settings are common to Number A
and B.
388
Network Services
Functions and operations
a Voice Mail service
F906i_E1kou
F906i.book
Page 389
Monday, April 21, 2008
Menu items
10:59 PM
Functions and operations
b Tone/Vibration message Set an alert tone to sound when a new voice message is
notification
added or when it is found by Check messages. And,
vibrate according to the setting of incoming voice call in
Vibrate alert/effect.
eSet the required itemseC
Voice Mail alert :
When setting to "ON", Alert tone can be set.
Notification melody :
Set melody for Voice Mail alert.
c Notify missed call
a Activate
If there is a missed call while FOMA terminal is powered
OFF or out of the service area, this function notifies of it
by SMS when FOMA terminal is powered ON or within
the service area again.
e"Yes"e"Yes" or "No"
･ Select "Yes" to notify only calls with Caller ID.
･ Select "No" to notify of all missed calls.
b Deactivate
e"Yes"
c Check setting
e"Yes"
･ Settings can be changed from the submenu on the
state request screen.
d Hide Voice Mail icon
Hides an icon for voice messages.
e"Yes"
Call waiting
When there is another incoming voice call during a voice call, this service notifies
you with the call waiting ring tone. This allows you to place your current voice call
on hold and then answer the other voice call. You can also make a call to another
party, putting the current call on hold.
･ When a videophone call is received during a videophone or voice call, Call
waiting does not operate but the call is recorded as a missed call.
･ When using Call waiting service, set Arrival call act to "Answer" in advance. If
not, you cannot answer calls received during a voice call with Call waiting
service active.
･ To answer the other incoming voice call during a voice call, perform the
operations below.
n : Put the current call on hold and answers the incoming call.
n : The current call is disconnected and the calling screen of the incoming
call appears. Press n and answer the call.
･ During Call waiting, you can switch the party to talk to by pressing I.
･ When making a voice call to another party during a current voice call, press m
and select "Dial up".
[Settings & NW services] 821eOperate by
1m
selecting a menu item
Menu items
Functions and operations
a Activate
e"Yes"
b Deactivate
e"Yes"
c Check setting
e"Yes"
Network Services
389
F906i_E1kou
F906i.book
Page 390
Monday, April 21, 2008
10:59 PM
Menu items
Call forwarding service
e"Yes"e"Yes"eEnter the forwarding destination
numbereCe"Yes"eEnter ring time
･ On the forwarding destination number entry screen ,
you can enter phone number by pressing m from
the phonebook, I from Received calls or a from
Redial.
･ When ring time is "0 Sec.", incoming calls are not
recorded in Received calls.
･ In B mode, the forwarding destination number and
ring time cannot be set.
Dual mode :
e"Number A" or "Number B"e"Yes"e"Yes"eEnter
the forwarding destination
numbereCe"Yes"eEnter ring time
･ For "Number B", the forwarding destination number
and ring time cannot be set.
b Deactivate
e"Yes"
Dual mode :
e"Number A" or "Number B"e"Yes"
Call forwarding service forwards voice calls and videophone calls to the phone of
your home or office when there is an incoming voice/videophone call while FOMA
terminal is in a location where radio waves are hard to reach or is powered OFF
or you do not answer the call within the specified ring time.
･ To give priority to Call forwarding service with Answer machine active, set ring
time for Call forwarding service which is shorter than a response time for
Answer machine.
･ When an incoming voice or videophone call is not answered with Call
forwarding active, it is recorded as a missed call and
(The digit indicates
the number of missed calls) appears on the stand-by display.
❖ Basic flow of Call forwarding service
Step 1 : Activate Call forwarding service.
Step 2 : Register the phone number of forwarding destination.
Step 3 : Call comes in to FOMA terminal.
Step 4 : Unanswered calls are forwarded to the previously specified destination.
m [Settings & NW services] 822eOperate by
1 selecting
a menu item
･ With 2in1 ON, activation and deactivation of Call forwarding service are
available for Number A and B respectively. You can make settings for
Number A in A mode and for Number B in B mode and select one of
numbers to be set in Dual mode. Other settings are common to Number A
and B.
c Register The Forwarding Change the forwarding destination or activates Call
Number
forwarding service after changing the forwarding
destination.
eEnter a forwarding numbereCe1 or
2e"Yes"
･ On the forwarding destination number entry screen,
you can select the phone number by pressing m
from the phonebook, I from Received calls or a
form Redial.
･ With 2in1 ON in Dual mode or B mode, you can
change only the forwarding destination for Number
B.
d Setting if forwarding
number busy
390
Network Services
Functions and operations
a Activate
Set Voice Mail service to answer calls when the
forwarding destination is busy or other cases.
e"Yes"
F906i_E1kou
F906i.book
Page 391
Menu items
e Check setting
Monday, April 21, 2008
10:59 PM
Functions and operations
e"Yes"
･ Settings can be changed from the submenu on the
state request screen.
Dual mode or B mode :
e"Number A" or "Number B"e"Yes"
･ For Number B, only activation/deactivation can be
confirmed.
◆ Setting whether to give guidance for Call forwarding
the voice prompts
1 1429eneFollow
･ For details, refer to "Mobile Phone User's Guide [Network Services]".
Menu items
b Register selected No
Functions and operations
Register the specified phone number as a nuisance
caller.
e"Yes"eEnter the phone numbereCe"Yes"
･ On the phone number entry screen, you can enter
phone number by pressing m from the phonebook,
I from Received calls or a from Redial.
c Delete all entries
e"Yes"
d Delete last entry
Delete one phone number registered last. By repeating
the similar procedure, you can delete phone numbers
individually from the one registered most recently.
e"Yes"
e Check the number of
entries
e"Yes"
Nuisance call barring service
Caller ID request service
You can set FOMA terminal to automatically reject nuisance calls. After
registering a phone number of the nuisance caller, calls from the registered phone
number are answered with a call rejection announcement or announcement and
image, and automatically disconnected.
･ When there is an incoming call from a number on the nuisance call list, no ring
alert sounds. The call reception is not recorded in Received calls.
An incoming call without the caller ID is answered with an announcement or
announcement and image requesting caller ID, and automatically disconnected.
･ An incoming call rejected by Caller ID request service is not recorded in
Received calls and
(The digit indicates the number of missed calls) does
not appear on the stand-by display.
m [Settings & NW services] 893eOperate by
1 selecting
a menu item
[Settings & NW services] 842eOperate by
1m
selecting a menu item
Menu items
a Register the caller
Functions and operations
Register the phone number of the last call you answered
as a nuisance caller.
e"Yes"
･ Phone numbers of calls not answered, such as missed
calls, are not registered.
Menu items
Functions and operations
a Activate
e"Yes"
b Deactivate
e"Yes"
c Check setting
e"Yes"
Network Services
391
F906i_E1kou
F906i.book
Page 392
Monday, April 21, 2008
10:59 PM
Menu items
Dual network service
e"Yes"e1 or 2
･ Select the language of the guidance you hear at the
time of calling.
e"Yes"e1-3
･ Select the language of the guidance the other party
hears at the time of receiving a call. If you set to
"Japanese+English", the voice prompt is played in the
order of Japanese → English, and if you set to
"English+Japanese", it is played in the order of
English → Japanese.
b Check setting
e"Yes"
You can use the mova terminal with the same phone number on FOMA terminal.
In a location out of the FOMA service and inside the mova service area, you can
communicate with others by using mova terminal.
･ FOMA terminal and mova terminal cannot be used simultaneously.
･ Operation to switch Dual network service is performed from FOMA terminal/
mova terminal not using the service.
m [Settings & NW services] 895eOperate by
1 selecting
a menu item
Menu items
Functions and operations
a Dual Network Switching Switch the Dual network service from mova terminal to
FOMA terminal.
e"Yes"eEnter the network security code
b Check setting
Functions and operations
a Guidance setting
e"Yes"
English guidance
Switching language for voice prompts
You can set to display in English the guidance for setting network services such
as Voice Mail service and voice guidance notifying out of service area etc.
m [Settings & NW services] 894eOperate by
1 selecting
a menu item
Service Dialing Number
You can make a call to DoCoMo-specified repair office or to general inquiries.
･ The item varies or is not displayed by some UIM types.→P43
･ With 2in1 ON in Dual mode, a caller ID selection screen appears.
[Settings & NW services] 896eOperate by
1m
selecting a menu item
Menu items
Functions and operations
aドコモ故障問合せ
Call to DoCoMo-specified repair office.
e"Yes"
bドコモ総合案内・受付
Call to DoCoMo for general inquiries.
e"Yes"
Set arrival act
You can activate/deactivate or check the Arrival call act settings.
[Settings & NW services] 898eOperate by
1m
selecting a menu item
392
Network Services
F906i_E1kou
F906i.book
Page 393
Monday, April 21, 2008
Menu items
10:59 PM
Functions and operations
a Activate
e"Yes"
b Deactivate
e"Yes"
c Check setting
e"Yes"
Remote control
Setting Remote control
Arrival call act
You can access services such as Voice Mail service and Call forwarding service
from touch-tone land-line phones, DoCoMo mobile phones, payphones, etc.
･ When using Voice Mail or Call forwarding service overseas, Remote control
must be activated in advance.
Selecting how incoming calls are handled while
talking
[Settings & NW services] 892eOperate by
1m
selecting a menu item
If subscribing to Voice Mail service, Call forwarding service and/or Call waiting,
you can set how to answer voice/videophone calls and 64K data communications
received during a call.
･ Unless you subscribe to Voice Mail service, Call forwarding service or Call
waiting, you cannot answer to calls received during a voice call.
･ When using Arrival call act, set Set arrival act to Activate in advance.
m [Settings & NW services] 899eOperate by
1 selecting
a menu item
Menu items
Functions and operations
a Answer
When Call waiting is Activate, Call waiting starts. With
Deactivate, you can answer an incoming voice call by
ending the current voice call or 64K data communication.
You can also select how to react to an incoming voice call
during a current voice call from submenu.→P63
b Voice mail
Connect incoming voice/videophone calls received
during a call to the Voice Mail service.
c Call Forwarding
Forward the second voice/videophone calls or 64K data
communication received during a call to the registered
forwarding destination.
･ 64K data communication calls, if any received during
64K data communications, are not forwarded.
d Call Rejection
Reject the second voice/videophone calls or 64K data
communication received during a call.
Menu items
Functions and operations
a Activate
e"Yes"
b Deactivate
e"Yes"
c Check setting
e"Yes"
Multi number
In addition to Basic Number, you can add and use up to 2 more numbers as phone
numbers of FOMA terminal : Additional No.1 and No.2.
･ Removing or replacing UIM may cause Multi number settings (name, phone
number, etc.) saved in FOMA terminal to be deleted. In such a case, save the
settings again.
･ A name of Basic Number or Additional Number is displayed on an incoming/
outgoing call screen.
･ When making a call from Redial or Received calls, a name of Multi number used
for the previous call is displayed and that number is used.
[Settings & NW services] 897eOperate by
1m
selecting a menu item
Menu items
Functions and operations
a Set Multi Number
e1-3e"Yes"
b Check setting
e"Yes"
･ Regardless of settings, calls are recorded as missed calls.
Network Services
393
F906i_E1kou
F906i.book
Page 394
Menu items
c Number Setting
d Incoming calls melody
setting
Monday, April 21, 2008
10:59 PM
Functions and operations
The name set in User information is displayed as Name
for Basic Number.
eSet the required itemseC
Additional No1 or No2: Name:
Up to 10 two-byte (20 one-byte) characters can be
entered. The name is displayed on the outgoing/
incoming call screen, Redial, Received calls, etc.
Additional No1 or No2: Phone number:
Up to 26 digits can be entered.
Multi number call :
With "Enable" set, a caller ID can be selected from
Multi number on a submenu.
e1 or 2eSet the required itemseC
･ When setting the incoming call operations to each
additional number, set Individual setting to "ON".
Setting "Ring alert" and "Show image"→P94
"Changing operations for incoming call"
◆ Selecting a phone number and making a call
･ When Multi number call of Number Setting is "Disable", Multi number cannot
be selected.
1 Enter the phone numberem4e1-3em or n
✔INFORMATION
･ Operation form Redial or Received calls : m→"Multi-No"
･ Operation from Recorded messages, Voice memos or members list of Scheduler : m
→"Call option"
･ Operation from phonebook list of phonebook : m→"Mail/Call option"→"Call option"
･ Operation from phone number details screen of phonebook : m→"Chaku-moji/
･
2in1
This service allows you to use 2 phone numbers/mail addresses for 1 mobile
phone; you can use FOMA terminal as if you have two different mobile phones by
using the specific mode function.
･ For details of 2in1, refer to "Mobile Phone User's Guide [2in1]".
･ With 2in1 ON, when replacing UIM (2in1 subscriber→2in1 subscriber), set 2in1
to OFF then set it to ON again to obtain a correct Number B, or obtain Number
B from User information.→P366
And, when replacing the UIM (2in1 subscriber→2in1 non-subscriber), set 2in1
to OFF to update to the correct user information.
❖ Modes
A mode : Allow to use your phone number (Number A) to make calls, send/receive
i-mode mails (Address A) and view the related data.
B mode : Allow to use the 2in1 phone number (Number B) to make calls, access to
a site where WEBmail (Address B) is available and view the related data.
Dual mode : Allow to use functions of both A and B.
･ Operation of each mode for 2in1→P396
❖ Precautions
･ Address B is used to send/receive mails to/from dedicated WEBmail site.→P190
･ With i-mode subscription, B mode is also available for i-mode services.
･ In B mode, Mail To function and SMS To function are unavailable.
✔INFORMATION
･ All data is deleted regardless of the 2in1 mode in the cases below.
MultiNo"→"Multi-No"
When operation from Call option, if you set to "Unspecified", operations are
performed according to Set Multi Number.
･
･
394
Network Services
- Deleting all items of recorded messages, voice memos, redial, received calls, phonebook entries,
mail logs
- Deleting operation except "One item" or "Selected items" for Inbox
- Deleting mail folder and/or phonebook group
- Deleting all data
When making calls connecting to an external device, calls are made from Number A.
i-Channel ticker can be set for each mode.
F906i_E1kou
F906i.book
Page 395
Monday, April 21, 2008
10:59 PM
◆ Setting 2in1 <2in1 setting>
･ The 2in1 must be ON when making settings or operating 2in1 setting.
･ With 2in1 ON, when the settings of custom menu are not changed from the
Menu items
e1-3
The next procedure→P95 Step 3 in "Changing ring alert
for calls, mail/messages, etc."
･ "Kisekae Tool" does not appear for this setting.
･ It operates according to this setting regardless of the
setting of Notify/Not notify of caller ID.
b Identification mark
Set the identification symbol to put to character strings
such as "Calling" displayed while calling or talking.
･ The setting of Number A is reflected to Identification
mark of Sound & Image.
eSet the required itemseC
Number A or Number B Identify No. : When setting to
"ON", the identification symbol is displayed.
Number A or Number B Mark : Set the identification
symbol.
default, press 6 for 1 second or more on the stand-by display and perform
authentication to activate 2in1 mode switching.
[Settings & NW services]
1m
87eAuthenticatee"Yes"eOperate by selecting a menu
item
･ When performing authentication with 2in1 ON, the 2in1 setting screen
appears.
Menu items
Functions and operations
a 2in1 mode switching
e1-3
･ The mode currently set cannot be selected.
b Ph.book 2in1 setting
Set phonebook entry of FOMA terminal phonebook to be
displayed in A mode, B mode and both A and B modes.
Phonebook entry set as "Common" appears in both A and
B modes.
Name displays→P82
eSelect a modeeSearch the phonebookeSelect
phonebook entryeCe"Yes"
･ On the phonebook selection screen, (phonebook
entry in A mode),
(phonebook entry in B mode), or
(phonebook entry in both A and B modes) appears
to the right side of a name.
c Stand-by display
a For Dual mode
b For B mode
d Set call/receive No.
e1 or 2
The next procedure→P102 Step 4 in "Setting image/
movie/i-motion/Chara-den as stand-by display"
e1 or 2
The next procedure→P102 Step 4 in "Setting image/
movie/i-motion/Chara-den as stand-by display"
Functions and operations
a Ring alert for No B
e 2in1 function OFF
Set 2in1 to OFF.
e"Yes"
f Receive avoidance
a Change rcv.
avoidance
Restrict the receptions of Number A and Number B
regardless of modes.
･ Mode link for avoid. should be deactivated.
eSet the required itemseC
Receive avoidance (Number A) or (Number B) : Set the
restriction of reception.
b Check rcv. avoidance e"Yes"
･ Settings can be changed from the submenu on the
status request screen.
c Mode link for avoid. e"Yes"
When activated, reception is allowed for both Numbers A
and B in Dual mode, only Number A in A mode and only
Number B in B mode.
･ When activated, 2in1 mode switching is unavailable
out of service area.
d Rcv. avoidance(Int.) e"Yes"
･ Mode link for avoid. should be deactivated.
･ When operating overseas, you are charged for an
international call fee for the country you stay.
Network Services
395
F906i_E1kou
F906i.book
Page 396
Monday, April 21, 2008
10:59 PM
✔INFORMATION
･ The first time you subscribe to 2in1, Ph.book 2in1 setting is set to "A" for phonebook
･
entries already saved in FOMA terminal phonebook. When the subscription is
renewed, previous Ph.book 2in1 setting remain.
Still image, animation and created animation can be set in Stand-by display setting
for each mode.
Service
B mode
Voice/
Call
Videophone
Calls
Receive*2
Depend on Receive avoidance
Phonebook Display*3
Number A
Number B
All calls/
receptions
Mail/SMS
Display
Mail/SMS sent
or received to/
from Address A/
Number A
Mail/SMS
received to
Address B*6/
Number B
All
Send
Address A/
Number A
Unavailable
Address A/
Number A*7
Receive*8
All
WEBmail site
Unavailable
Available
Available
Dual mode
Select when
dialing*1
"A" "Common"
"B" "Common" All
Name conversion*4 "A" "Common"
"B" "Common" All
New entry
"B"
"A"
Receive all items via Sender's state is taken over*9
infrared
communication/iC
transmission
"A"
*5
Receive all items via Depend on Ph.book 2in1 setting at sending side
infrared
communication/iC
transmission
396
Receive 1 item via
infrared
communication/iC
transmission
"A"
Restore from
microSD card
Depend on Ph.book 2in1 setting when backing
up*5
Copy 1 item from
microSD card
"A"
Copy to UIM
phonebook
"Common" (Ph.book 2in1 setting is not set)
Copy from UIM
phonebook
"A"
Network Services
"B"
"B"
"B"
"A"
"A"
Dual mode
Call from/
Receive to
Number B
Only items with different actions depending on modes are listed (items with same
actions as in A mode are excluded).
A mode
B mode
Call from/
Receive to
Number A
❖ 2in1 function in each mode
Service
A mode
Display redial/received calls
PushTalk
"A"
Receive 1 item via
infrared
communication/iC
transmission
Address A/Number A
Restore from
microSD card
The state at the time of backup is taken over*9
Copy 1 item from
microSD card
Address A/
Number A
Move/Copy to UIM
(SMS only)
Move/Copy after deleting the information of your
number
Move/Copy from
UIM (SMS only)
Move/Copy all
as Number A
Unavailable
Move/Copy all
as Number A
Call
Number A
Unavailable
Number A*10
Unavailable
"A" "Common"
Receive
Number A
Display PushTalk
phonebook
"A" "Common"
Unavailable
Address A/
Number A
i-αppli
Available
Available*11
Available*12
Display User information
Number A/
Address A
Number B/
Address B
All
F906i_E1kou
F906i.book
Page 397
Monday, April 21, 2008
10:59 PM
*1 Even when calling from a party in the member list of the schedule or the party of custom menu,
you can select when calling. When calling from phonebook, the call is made from Number A to
the party you set to "A" or "Common" in Ph.book 2in1 setting, and the call is made from
Number B to the party you set to "B". The same applies to Quick dial and Headset quick-dial.
When calling from recorded messages voice memo while talking, redial, received calls or mail
logs, the call is made according to the number at sending/receiving.
When calling to the phone number registered in User information, Number A is applied for the
phone number registered as Number A in User information, and Number B is applied for the
phone number registered as Number B in User information.
Note that, when calling from Call option, you can select either "Number A" or "Number B".
*2 Specified caller, Ring alert delay or Unregistered caller is not influenced by Ph.book 2in1
setting.
*3 When setting secret attribute, the operation of Privacy mode takes precedence.
*4 If the phone number or mail address is saved in the phonebook, the name saved in the
phonebook is displayed while calling/receiving/ringing/talking, as the sender of received mail,
as the receiver of sent/unsent mail, as the requestor name of Location request or the location
history log screen of GPS.
*5 If the sender or the terminal used for backup is incompatible with 2in1, all items in Ph.book
2in1 setting are set to "A".
*6 Messages saved to terminal from WEBmail site, new arrival notification messages, alarm
notification messages.
*7 Note that Address A is used to send mail and Number A is used to send SMS also to parties set
as "B" in Ph.book 2in1 setting.
Logs for Address B/Number B in the received message log cannot be used for sending.
*8 When a message is received at Address B/Number B in A mode or at Address A/Number A in B
mode, none of mail ring alert, light and vibrator operate.
*9 Address/Number A (or B) of the sender or the terminal for backup are saved as Address/
Number A (or B) of the receiver or the terminal for restoration.
*10 You cannot make a PushTalk call to a party set as "B" in Ph.book 2in1 setting.
*11 i-αppli using mail function and i-αppli stand-by display are unavailable.
*12 i-αppli stand-by display is unavailable.
OFFICEED
"OFFICEED" is an intragroup flat-rate service provided with specified IMCS
(Inbuilding Mobile Communication System). This service requires a separate
subscription to use.
For details, refer to DoCoMo business website (http://www.docomo.biz/d/212/).
m [Settings & NW services] 86eOperate by selecting a
1 menu
item
Menu items
Functions and operations
a Area display setting
Set if you display
on the stand-by display when
FOMA terminal is in OFFICEED area.
e1 or 2
b Start forwarding
e"Yes"
c Stop forwarding
e"Yes"
d Check fwd setting
e"Yes"
Network Services
397
F906i_E1kou
F906i.book
Page 398
Monday, April 21, 2008
10:59 PM
Additional service (Register USSD)
Registering new network services
When a new network service is introduced by DoCoMo, you can use the service
by registering it in the menu.
m [Settings & NW services] 891eOperate by
1 selecting
a menu item
Menu items
a Register USSD
398
Network Services
Functions and operations
Registering/Changing service
ePlace the cursor on the number and CeSet the
required itemseC
USSD code :
Enter Service code provided by DoCoMo.
･ Service code is the code used to make settings for
the network services. It is registered as the USSD
code on FOMA terminal.
Name :
Up to 10 two-byte (20 one-byte) characters can be
entered for a service name.
Using registered service
eSelect a service
Deleting registered service
ePlace the cursor on the service and me1 or
2e"Yes"
Menu items
b Record reply message
Functions and operations
Register the message associated with the code returned
from the service center when executing the added
service. This message appears when the registered code
is returned as a response.
Registering/Changing service
eSelect a numbereSet the required itemseC
USSD code :
Enter Service code provided by DoCoMo.
Reply message :
Up to 10 two-byte (20 one-byte) characters can be
entered.
Deleting registered reply message
ePlace the cursor on the reply message and me1
or 2e"Yes"
F906i_E1kou
F906i.book
Page 399
Monday, April 21, 2008
10:59 PM
PC Connection
Data communication ...........................................................................................................................................................
Before use ............................................................................................................................................................................
Flow of setup for data communication (OBEX™ communication) ................................................................................
Flow of setup for data communication .............................................................................................................................
AT commands ......................................................................................................................................................................
CD-ROM ................................................................................................................................................................................
Introduction of DoCoMo keitai datalink ............................................................................................................................
400
401
402
403
403
404
404
For details of data communication, refer to "Manual for PC Connection" (PDF version) in the attached CD-ROM
or on DoCoMo website.
To see PDF version of "Manual for PC Connection", Adobe® Reader® is required. If Adobe Reader is not installed
in your PC, install Adobe® Reader® from the attached CD-ROM. For details of usage, refer to "Adobe Reader
Help".
399
F906i_E1kou
F906i.book
Page 400
Monday, April 21, 2008
10:59 PM
◆ Data transfer (OBEX™ communication)
Data communication
Communications available by connecting FOMA terminal and a PC are classified
to Packet communication, 64K data communication and data transfer (OBEX™
communication).
･ To make packet or 64K data communications or edit data such as the phonebook
using a PC connected, installation of the software in the attached CD-ROM and
various settings are required.
･ DoCoMo does not guarantee operations on upgraded OS.
･ For packet communication overseas, use IP connection (packet communication
is unavailable with PPP connection). 64K data communication may be
unavailable overseas.
･ FOMA terminal does not support fax communication or Remote Wakeup.
･ Data communication can be performed connecting with PDA of DoCoMo,
musea, sigmarion II or sigmarion III. Note that update of musea or sigmarion II
is required for use. For details of such as method to update, refer to DoCoMo
website.
This service allows you to exchange data such as image, music, phonebook, mail,
etc., with other FOMA terminals or PCs.
Infrared communication→P322
iC transmission→P322
F906i
F906i
FOMA USB Cable with Charge Function 01/02
microSD card→P307
DoCoMo keitai datalink→P404
400
PC Connection
F906i_E1kou
F906i.book
Page 401
Monday, April 21, 2008
10:59 PM
❖ Packet communication
Packet communication charges are based on the amount of data sent and received,
which makes it suitable for high-speed exchange of comparatively small amounts
of data as in sending and receiving mail. No communication charges are required
when no data are exchanged even if you are connected to the network. Therefore,
sending/receiving data as needed while remaining connected to the network is
possible.
High-speed packet communication can be performed at a reception speed of up to
3.6 Mbps and a transmission speed of up to 384 Kbps by using access points that
support FOMA packet communication such as mopera U or mopera of DoCoMo's
Internet connection service. It offers by the best effort method that actual
transmission speed varies by the communication environment or the severity of
congestion.
Note that communications of large-size data such as viewing websites containing
images and downloading require high charges.
* When connecting to an access point out of the FOMA HIGH-SPEED Area or when you are
using a device not compatible with HIGH-SPEED such as mopera, or when using devices not
compatible with HIGH-SPEED such as DoCoMo's PDA, musea, sigmarion II or sigmarion
III, the connection is made at the speed of 384 Kbps.for both reception and transmission.
❖ 64K data communication
Since communication charges are based on the duration of the connection to the
network regardless of the volume of data, it is suitable for sending and receiving
relatively large amounts of data as in downloading multi-media contents.
Data can be sent/received by using access points that support FOMA 64K data
communication services such as mopera U or mopera of DoCoMo's Internet
connection service or ISDN synchronized 64K access points.
Be careful that a high cost is charged for long-time communications.
Before use
◆ Operating environment
The operation environment for using data communication is as shown below.
Item
Requirements
Computer
PC/AT compatible computer with a USB port (conform
to USB specification 1.1/2.0)
OS (Japanese version)
Windows 2000, Windows XP, Windows Vista
Memory requirements*
Windows 2000 : 64MB or more
Windows XP : 128MB or more
Windows Vista : 512MB or more
Hard disk capacity*
5MB or more free disk space
* This is the operating environment of FOMA PC configuration software. Memory
requirements and hard disk capacity may vary by the PC system configurations.
･ Utilization may not be possible in certain operating environments. Operation is
not guaranteed in an environment except that described above nor DoCoMo
assumes responsibility for pertaining to operation under such conditions.
◆ Devices required
The devices below are required in addition to FOMA terminal and a PC.
- FOMA USB Cable with Charge Function 01/02 (optional) or FOMA USB Cable (optional)
- Attached CD-ROM "FOMA® F906i用CD-ROM (CD-ROM for FOMA® F906i)"
* USB cable for PC is not available because the connector type is different.
* If you use USB HUB, operations may not be performed correctly.
PC Connection
401
F906i_E1kou
F906i.book
Page 402
Monday, April 21, 2008
10:59 PM
◆ Usage precautions
❖ Internet service provider usage charges
When using the Internet on a PC, usage charge to your Internet service provider
(hereinafter referred to as Provider) is usually required. This charge is paid directly
to the Provider, and is separated from the FOMA service charge. For details on
usage charges, contact your Provider.
･ DoCoMo's Internet connection service mopera U or mopera is available.
mopera U is a charged service requiring subscription. You can also use a plan
which charges monthly fee only for a month you use this service. For Internet
connection with FOMA terminal, to use mopera U applicable to broadband
connections is recommended.
mopera requires no subscription or monthly charge. This service is convenient
for those who need to connect to Internet immediately.
❖ Dialup connection (Provider etc.)
Packet and 64K data communications have different connection destinations.
When performing packet communication, use the dialup connection for packet
communication. When performing 64K data communication, use the dialup
connection for FOMA 64K data communication or ISDN synchronized 64K data
communication.
･ Connecting to DoPa access points is unavailable.
❖ User authentication
Some dial-up connections require user authentication when connecting. In this
case, enter your ID and password using communication software or dial-up
network to connect. Your ID and password are assigned by the network
administrator of the connection destination such as your provider or corporate
LAN. For details, contact your provider or network administrator.
❖ Access authentication while using PC browser
If FirstPass (user certificate) is required for the access authentication during using
PC browser, you must install FirstPass PC software from the CD-ROM provided and
configure it. For details, refer to "FirstPassManual" in CD-ROM.
To view "簡易操作マニュアル (Manual for simple use)" (PDF format), Adobe®
Reader® (version 6.0 or later is recommended) is required. If Adobe Reader is not
installed in your PC, you can install it from the attached CD-ROM.
❖ Conditions of packet communication and 64K data
communication
To perform data communication from FOMA terminal, the conditions below must
be satisfied.
- You must be within the FOMA service area
- Packet communication requires an access point that supports FOMA packet communications
- 64K data communication requires a dialup connection that supports FOMA 64K data
communications or ISDN synchronized 64K
* Even when the above requirements are satisfied, you may not be able to perform data
communication if base station traffic is heavy or the radio wave conditions are poor.
Flow of setup for data communication (OBEX™
communication)
When using FOMA USB Cable with Charge Function 01/02 (optional), install
FOMA communication configuration file in advance.
Downloading and installing FOMA communication configuration file
・Installing from attached CD-ROM
or
・Downloading from DoCoMo website and installing
Data transfer
402
PC Connection
F906i_E1kou
F906i.book
Page 403
Monday, April 21, 2008
10:59 PM
❖ FOMA communication configuration file
Flow of setup for data communication
This section describes the setup work needed to perform packet communication
or 64K data communication.
a Downloading and installing FOMA communication configuration file
・Installing from attached CD-ROM
Install the FOMA communication configuration file in a PC before connecting to
perform packet communication or 64K data communication.
❖ FOMA PC configuration software
When the FOMA PC configuration software (contained in the attached CD-ROM) is
installed on a PC, a number of settings required for packet communication or 64K
data communication can be easily set from a PC.
or
・Downloading from DoCoMo website and installing
b Connecting a PC to FOMA terminal
c Checking FOMA communication configuration file
AT commands
AT commands are commands for setting FOMA terminal functions using a PC.
FOMA terminals comply with AT commands and support some extended
commands and proprietary AT commands.
For AT command details, refer to "Manual for PC Connection" in the attached CDROM.
Installing FOMA PC configuration software
Setting packet communication
by easy setup
Setting 64K data communication
by easy setup
Setting communications without using
FOMA PC configuration software
Performing communication
PC Connection
403
F906i_E1kou
F906i.book
Page 404
Monday, April 21, 2008
10:59 PM
CD-ROM
Attached CD-ROM contains software for Data Communication with FOMA
terminals, PDF version "Manual for PC Connection" and "Kuten Code List". For
details, refer to attached CD-ROM.
■ Software/PDF included
- FOMA communication configuration file
- FOMA PC configuration software
- FOMA byte counter
- Guide to DoCoMo keitai datalink
- i-mode.net notifier
- FirstPass PC software
- Guide to mopera U (mopera U start up tool/mopera U connection & setting tool/FOMA byte
counter/mopera U requesting original data)
- Guide to Napster®
- PDF version "パソコン接続マニュアル"/"Manual for PC Connection"
- PDF version "区点コード一覧"/"Kuten Code List"
- Adobe® Reader®
When the CD-ROM is inserted into the PC's CD-ROM drive, the warning screen
below may be displayed. This warning appears by security settings for Internet
Explorer, but may be ignored. Click [はい (Yes)].
* The screen shows an example displayed when using Windows XP. The screen contents
may vary by the environment of the PC used.
404
PC Connection
Introduction of DoCoMo keitai datalink
"DoCoMo keitai datalink" is a software for backing up phonebook, mail and other
data in your mobile phone to a PC and edit them. It can be downloaded from
DoCoMo's website. For details and downloading of this software, refer to the
website below. You can also access to this site from the attached CD-ROM.
http://datalink.nttdocomo.co.jp/ (in Japanese only)
For details including downloading procedure, data that can be transferred,
supported operating system, operation environment, installing procedure,
restrictions, refer to the webpage above. For operations after installation, see
Help in the software.
Using DoCoMo keitai datalink requires USB cable (optional).
F906i_E1kou
F906i.book
Page 405
Monday, April 21, 2008
10:59 PM
Overseas use
Overview of international roaming service (WORLD WING) ...........................................................................................
Services available overseas ................................................................................................................................................
Preparing and checking for using FOMA terminal overseas ...........................................................................................
Making a call from overseas ...............................................................................................................................................
Receiving a call from overseas ...........................................................................................................................................
Setting a search method for network ........................................................................................ Network search mode
Setting a network to be connected by priority ....................................................................................... PLMN setting
Switching networks ............................................................................................................................... 3G/GSM setting
Displaying current Area service status ............................................................................................ Area service status
Stand-by display during international roaming services .................................................................................................
Setting roaming guidance ................................................................................................................. Roaming guidance
Restricting incoming calls during international roaming ............................................................. Bar calls at roaming
Using network services during international roaming .................................................... Services available overseas
406
407
408
410
411
411
412
412
412
413
413
414
414
405
F906i_E1kou
F906i.book
Page 406
Monday, April 21, 2008
10:59 PM
Overview of international roaming service
(WORLD WING)
Area
International roaming (WORLD WING) is a service that allows you to make voice
calls and access i-mode using network of affiliated telecommunications carriers
even overseas, outside FOMA network services area.
･ If you subscribed to FOMA service on or after September 1, 2005, separate
subscription is not required to use WORLD WING. If you declined to use WORLD
WING at subscription to FOMA service or canceled it, you need subscription
again.
･ If you subscribed to FOMA service on or before August 31, 2005 but not to
WORLD WING, separate subscription is required to use WORLD WING.
･ There are some charging plans unavailable.
･ UIM (not blue) compatible with WORLD WING must be installed in FOMA
terminal.
･ For available areas, charges and other details, refer to DoCoMo's "International
service web page".
Australia
■ Overseas network
There are 3 types of networks overseas, W-CDMA (3G), GPRS and GSM.
Code
61
Area
Code
Macau
853
Austria
43
Malaysia
60
Belgium
32
Maldives
960
Brazil
55
New Caledonia
687
Canada
New Zealand
64
China
86
Norway
47
Czech
420
Peru
51
Egypt
20
Philippines
63
Fiji
679
Russia
65
Finland
358
Singapore
France
33
Spain
34
Germany
49
Sweden
46
Greece
30
Switzerland
41
Holland
31
Tahiti (French Polynesia)
689
Hong Kong
852
Taiwan
886
W-CDMA(3G)
Third generation mobile communications network compliant with
world standard 3GPP*1.
Hungary
36
Thailand
66
India
91
Turkey
90
GPRS*2
A 2.5th mobile communication network that high speed packet
communication using GSM communication method is available.
Indonesia
62
United Kingdom
44
Italy
39
USA
Second generation mobile communications network in digital
method most prevailing worldwide.
Japan
81
Viet Nam
84
Korea
82
Network
GSM*3
Description
*1 Abbreviation of 3rd Generation Partnership Project. 3GPP is an area standardization
organization established to develop standard technology specifications for third generation
mobile communications system (IMT-2000).
*2 Abbreviation of General Packet Radio Service. By speeding up GSM, data communication such
as packet communication is facilitated.
*3 Abbreviation of Global System for Mobile Communications. The world's most prevailing
mobile network system.
406
■ Country code of major countries
For international calls or Int'l call assist, use country code listed below (as of April,
2008).
Overseas use
･ For country codes, refer to DoCoMo's "International service web page".
F906i_E1kou
F906i.book
Page 407
Monday, April 21, 2008
10:59 PM
Services available overseas
Available communication services vary by the telecommunications carrier and the
network of the country you stay.
･ For information about countries, areas, telecommunications carriers and other
details applicable to the service, refer to DoCoMo's "International service web
page".
･ Call and stand-by durations available may be nearly halved for some network or
other conditions in the country you stay.
◆ Network and available communication services
･ Some services may be unavailable depending on the telecommunications
carrier or area.
Network
Communication services
3G
GPRS
GSM
○
○
*1
Voice call*2
○
Videophone call*2, 3
○
×
i-mode communication*4
○
○
i-mode mail
○
○
SMS
○
○
i-Channel*5
○
○
Position location of GPS*6
○
○
Data communication (Packet communication)*7
○
○
×
×
×
○
×
*4 Connections from Full Browser and TVlink list to the data broadcasting site are included. Note
that Activate 1Seg is unavailable overseas.
Preinstalled i-αppli, "日英版しゃべって翻訳 for F (J-E Speech Translation for F)" and "日中
版しゃべって翻訳 for F (J-C Speech Translation for F)" are available also overseas.
*5 Note that, in overseas, you are charged packet communication fee for each reception of iChannel (Communications allowance in Japan not applicable). The same goes for auto update
of Basic channel.
*6 When connecting to a GPS service usage setting site or viewing a DoCoMo's map by making
positioning overseas, you are connected to the site but an error screen appears and the service is
not available. A packet communication fee is charged even in such a case.
*7 64K data communication connecting to a PC etc. is unavailable overseas.
■ SMS
SMS can be sent to or received from parties using overseas service providers
except DoCoMo. For countries and overseas telecommunications carriers
available, refer to DoCoMo's "International service web page".
･ When sending SMS to FOMA terminal, enter its phone number in the same way
as in Japan.
･ When sending SMS to a party using an overseas telecommunications carrier
except DoCoMo, enter "+" and "Country code" before the receiver's phone
number. Alternatively, enter "010", "Country code" and "receiver's mobile phone
number" in this order (Omit leading "0", if exists, from the receiver's phone
number).
･ If SMS sent to a party using an overseas telecommunications carrier contains
characters incompatible with the receiver's terminal, they may not be correctly
displayed. For details, refer to "Mobile Phone User's Guide [International
Services]" and/or "Mobile Phone User's Guide [Network Services]".
○
×
*1 When (red) appears, only sending/receiving of voice call/SMS and position location of GPS
are available.
*2 With 2in1 activated, Number B is not available for making calls.
When using Multi number, calls cannot be made from additional numbers.
*3 Make and receive international videophone calls to/from parties using certain overseas 3G
telecommunications carriers or those using FOMA terminals overseas.
◆ Network Services
When subscribing to network services, you can perform operations such as
setting/canceling of them also from overseas.
･ Some network services that can be set or canceled may be unavailable
depending on an overseas telecommunications carrier used.
For details, refer to "Mobile Phone User's Guide [International Services]" and/or
"Mobile Phone User's Guide [Network Services]".
Overseas use
407
F906i_E1kou
F906i.book
Page 408
Monday, April 21, 2008
10:59 PM
◆ Usage in the country you stay
Preparing and checking for using FOMA
terminal overseas
･ Overseas usage fees are charged together with your monthly usage fees. For
some overseas telecommunications carriers used, overseas usage fees is
charged in a bill of the next or subsequent month. In addition, usages in the
same charging period may be charged in different months.
◆ Preparing before leaving Japan
❖ Battery charge
･ Handling instructions of AC adapter→P20
･ Charging battery using AC adapter→P44
❖ Using i-mode
･ For details, refer to "Mobile Phone User's Guide [i-mode] FOMA version".
■ Setting in Japan
iMenu→"English"→"Options"→"International Settings"→"i-mode services
Settings"
■ Setting overseas
iMenu→"International Settings"→"i-mode services Settings"
❖ Using network services
When using Voice Mail or Call forwarding service overseas, you need to subscribe
to each network services and activate Remote control in advance.
408
Overseas use
■ Connecting to network
When FOMA terminal is turned ON overseas, it is automatically connected to an
available network.→P411, 412
■ Display overview
The icon indicating the network in use and the operator name being connected
appear.→P413
･ Icon definitions.
/ : Connected to 3G Network
: Connected to GPRS Network
: Connected to GSM Network
･ The mark does not appear while using FOMA Network.
■ Date/Time
When setting Auto time adjust to "ON", the time or time difference is corrected
when FOMA terminal is turned ON or when time/time difference correction
information is received from the network of the telecommunications carrier you
are connected. When time difference is corrected, a message indicating it appears.
･ After time or time difference is corrected, times displayed for call histories and
sent mails are local times.
･ Even when Auto time adjust is set to "ON", the corrected time may have an error
of several seconds. Time or time difference correction may not be performed for
some network of the telecommunications carrier used overseas.
❖ Service inquiries
For loss or theft of FOMA terminal or payment of cumulative cost overseas, see
"Loss or theft of FOMA terminal or payment of cumulative cost overseas" or
"Failures encountered overseas" on the back cover of this manual. Please be
careful that you are charged also for calls and/or communications, if any, occurring
after loss or theft.
･ For the latest information about International access number and International
phone code for Universal number, refer to DoCoMo's "International service web
page".
F906i_E1kou
F906i.book
Page 409
Monday, April 21, 2008
10:59 PM
■ International access number for major countries (table 1)
The International access numbers for major countries are as shown below (as of
March, 2008).
Area
Australia
Number
0011
Area
■ International phone code for Universal number (table 2)
The International phone codes for Universal number of individual countries are as
shown below (as of March, 2008).
Number
Area
Code
Area
Macau
00
Argentina
00
Italy
Code
00
Belgium
00
Malaysia
00
Australia
0011
Korea
001
Brazil
0021/0014
Monaco
00
Austria
00
Luxembourg
00
Canada
011
New Zealand
00
Belgium
00
Malaysia
00
China
00
Norway
00
Brazil
0021
New Zealand
00
Czech
00
Philippines
00
Bulgaria
00
Norway
00
Denmark
00
Poland
00
Canada
011
Peru
00
Finland
00
Portugal
00
China
00
Philippines
00
France
00
Russia
810
Columbia
009
Portugal
00
001
Germany
00
Singapore
001
Denmark
00
Singapore
Greece
00
Spain
00
Finland
990
South Africa
09
Holland
00
Sweden
00
France
00
Spain
00
Hong Kong
001
Switzerland
00
Germany
00
Sweden
00
Hungary
00
Taiwan
002
Holland
00
Switzerland
00
India
00
Thailand
001
Hong Kong
001
Taiwan
00
Indonesia
001
Turkey
00
Hungary
00
Thailand
001
Ireland
00
United Arab Emirates
00
Ireland
00
United Kingdom
00
Italy
00
United Kingdom
00
Israel
014
USA
011
･
･
･
･
Korea
001
USA
011
Luxembourg
00
Viet Nam
00
Some of the above numbers may be unavailable.
Universal numbers are only available for the countries listed above.
When a call is made from a mobile phone, a local call charge is required.
When a call is made from a hotel, you may be charged for a phone usage fee.
Before using the phone, ask the hotel about it.
･ In many cases, Universal numbers are unavailable from mobile phones, pay
phones or hotels.
Overseas use
409
F906i_E1kou
F906i.book
Page 410
Monday, April 21, 2008
10:59 PM
◆ Setting after returned to Japan
When you turn FOMA terminal ON after coming back to Japan, it is automatically
connected to FOMA network.
When FOMA terminal cannot be connected to FOMA network, set Network search
mode to "Auto" and reset 3G/GSM setting to "AUTO".
Making a call from overseas
You can make voice and videophone calls from overseas using international
roaming service.
･ For countries and overseas telecommunications carriers available, refer to
DoCoMo's "International service web page".
･ For videophone calls, the other party's image displayed on your FOMA terminal
may be disturbed or call connection may be unavailable for a reason on the
connected terminal.
･ Even when setting Caller ID notification, the Caller ID may not be notified or
incorrect Caller ID may be displayed for some telecommunications carriers.
･ If you register names and country codes of frequently-called countries by Int'l
call assist, dialing operation can be performed easily.
◆ Making an international call (including Japan)
(1 sec. or more)eCountry codeeArea code (City
10
code)eEnter a phone numberen or C
･ Press 0 for 1 second or more to enter "+".
･ Omit "0" in area code (city code) starting with "0". This dialing procedure
does not cover certain countries including Italy (land-line phones).
❖ Selecting country code to make an international call
(including Japan)
You can select a country code registered in Country code setting in Int'l call assist.
code (City code)eEnter a phone numberem2eSelect
1 Area
Call type fielde1 or 2eSelect the Intn'l call
fielde2eSelect Country code fieldeSelect Country
codeem or ne"Yes"
Leading "0" of an area code (city code) is converted to "+" and the selected
country code.
･ If "V.phone" is selected for "Call type", Chara-den to display during a call
can be set by pressing I.
❖ Making an international call (including Japan) by using the
phonebook
･ It applies only to phone numbers beginning with "0" saved in phonebook.
･ Country code of Auto switch of Int'l call assist must be set to "ON", and the
Country code setting must to be set to the country to make a call to in advance.
the phonebookePlace the cursor on the member and
1 deSearch
n or Ie"Yes"
Leading "0" of the area code (city code) is converted to "+" and country code
set.
◆ Making a call inside the country you stay
･ A call may be made without displaying the message.
the phone numberen or Ce"No, use original"
1 Enter
Using phonebook : deSearch the phonebookePlace the cursor on the
member and n or Ie"No, use original"
◆ Making a call to WORLD WING user overseas
To make a call, enter "+" and Japan's country code "81" even when staying in the
same country as the party to be called.
(1 sec. or more)e81e90-XXXX-XXXX or 80-XXXX10
XXXXen or C
410
Overseas use
F906i_E1kou
F906i.book
Page 411
Monday, April 21, 2008
10:59 PM
Network search mode
Receiving a call from overseas
You can receive an international call in the same way as in Japan.
■ When letting a party make a call from Japan
In the same way as when you are in Japan, let a calling party make a call by
entering your phone number.
090-XXXX-XXXX or 080-XXXX-XXXX
■ When letting a party make a call from outside of Japan
Let a calling party make a call in the same way as making an international call to
Japan, because the call is routed via Japan regardless of the country the caller
stays.
Intn'l access No.e81 (Country code of Japan)e90-XXXX-XXXX or 80-XXXXXXXX
✔INFORMATION
･ When there is an incoming call from any country during international roaming, it is
treated as an international call forwarded from Japan. A caller is charged for a call fee
to Japan and a receiver for a reception fee including an international forwarding fee.
･ Even when a caller makes a call notifying caller ID, it may not be notified for some
overseas telecommunications carriers. A notified caller ID is different from the actual
one for some telecommunications carrier used by the caller.
Setting a search method for network
An available network is automatically searched for and reconnection is made
when starting international roaming or FOMA terminal is placed outside a current
network.
･ Setting may be unavailable for some radio wave and/or network conditions.
･ Telecommunications carriers except NTT DoCoMo cannot be selected in Japan.
[Settings & NW services] 911e1-3
1m
Auto : Automatically reconnect to available network.
Manual : Search for network again and a list of networks to connect is
displayed. Select a network.
･ Searching again is available by pressing m.
Network re-search : When "Auto" is set, network is automatically switched.
When "Manual" is set, automatically search for networks again and a list of
networks is displayed. Select a network.
✔INFORMATION
･ appears for unavailable network in PLMN List, 3G appears for 3G Network and
GSM appears for GSM/GPRS Network.
･ When FOMA terminal is placed out of the connected network during "Manual", search
for the network again, or set to "Auto".
Overseas use
411
F906i_E1kou
F906i.book
Page 412
Monday, April 21, 2008
10:59 PM
PLMN setting
Setting a network to be connected by priority
You can set priority of a network to be connected when Network search mode is
"Auto".
[Settings & NW services] 9114
1m
Listed from the one with the highest priority.
the cursor on the network and m2
2 Place
Displaying detail information : Select the network
Deleting an item : Place the cursor on a network and
m31e"Yes"eC
Deleting selected items : m32eSelect
networkseCe"Yes"eC
Deleting all items : m33eAuthenticatee"Yes"eC
a priority leveleC
3 Select
The telecommunications carrier moves to the selected priority with a different
level.
･ To give the lowest priority, select "".
◆ Adding networks to priority network list
･ Up to 20 items can be registered.
 Adding a network not registered in FOMA terminal
1 m [Settings & NW services] 9114
the required itemseC
2 m11eSet
MCC : Enter the country code by 3 digits.
MNC : Enter the network number by 2-3 digits.
Selecting a network from a list registered in FOMA terminal :
m12eSelect the country nameeSelect the network
Selecting a network from a list of those currently available :
m13ePlace the cursor on the network and CeGo to Step 4
3 1-3eC
412
Overseas use
a priority leveleC
4 Select
The telecommunications carrier added to the selected priority with a different
level.
･ To give the lowest priority, select "".
3G/GSM setting
Switching networks
･ When setting to "AUTO", automatically connected to an available network even
when moving to a service area of a different type of network.
1 m [Settings & NW services] 912e1-3
✔INFORMATION
･ When setting to "AUTO", if both 3G and GSM/GPRS Networks are detected, 3G
Network takes precedence.
Area service status
Displaying current Area service status
[Settings & NW services] 766
1m
The service state of the currently connected network is displayed.
･ You can use voice/videophone calls etc. by CS, and i-mode, i-mode mail,
etc. by PS.
F906i_E1kou
F906i.book
Page 413
Monday, April 21, 2008
10:59 PM
Stand-by display during international roaming
services
✔INFORMATION
･ Two time zone clocks appear in 24 hour when time or time difference correction is
performed.
･ On Two time zone clocks, Japan time is displayed on the right side. When displaying
◆ Setting if you display an operator name 
･
You can display an operator name at the top of the display.
･
m [Settings & NW services] 913e1 or 2
time of another country on the right side, set this setting to "OFF", set the design of
Clock display format to "World time clock" and set the time zone.
Two time zone clocks are not displayed if movie/i-motion, Chara-den or i-αppli is set
for stand-by display.
The time of the country you stay is displayed on the sub-display.
Roaming guidance
Setting roaming guidance
✔INFORMATION
･ When using FOMA network or out of service area, no operator name is displayed
regardless of this setting.
◆ Setting if you display Two time zone clocks 
You can display the times of the country you stay and Japan.
You can set so that a roaming guidance is played for a caller to notify that you are
currently in international roaming.
･ Set before leaving Japan.
1 m [Settings & NW services] 85
or 2e"Yes"
21
･ Press 3 and select "Yes" to check the current settings.
✔INFORMATION
･ Even when this setting is Deactivate, a ring alert set by a telecommunications carrier
is played.
･ Even when this setting is Activate, a guidance in a foreign language is played under
some conditions of a telecommunications carrier used.
1 m [Settings & NW services] 93e1 or 2
Overseas use
413
F906i_E1kou
F906i.book
Page 414
Monday, April 21, 2008
10:59 PM
Bar calls at roaming
Services available overseas
Restricting incoming calls during international
roaming
Using network services during international
roaming
･ Some functions may not be set depending on the overseas telecommunications
carrier.
･ 64K data communication connecting to a PC etc. is unavailable overseas.
1 m [Settings & NW services] 919
or 2
2 1e1
Canceling Bar calls at roaming : 2
Checking current setting : 3e"Yes"
3 "Yes"eEnter the network security code
You can make settings from overseas for Voice Mail, Call forwarding and other
services.
･ For details of network services, refer to "Mobile Phone User's Guide
[International Services]" and/or "Mobile Phone User's Guide [Network
Services]".
･ Remote control must be activated in advance.
･ When operations are made from overseas, you are charged for an international
call fee for the country you stay.
m [Settings & NW services] 91eOperate by selecting a
1 menu
item
Menu items
414
Overseas use
Functions and operations
d Voice mail(Int.)
Operate Voice Mail service from overseas.
a Activate
b Deactivate
c Play messages
d Voice mail settings
e Set ring time
e Call forwarding(Int.)
Operate Call forwarding service from overseas.
a Activate
b Deactivate
c Call fwd. settings
f Remote control(Int.)
Operate Remote control from overseas.
g Caller ID request(Int.)
Operate Caller ID request service from overseas.
h Roaming guidance(Int.)
Operate Roaming guidance from overseas.
"Yes"eOperate by the following instructions of a voice guidance
F906i_E1kou
F906i.book
Page 415
Monday, April 21, 2008
10:59 PM
Appendix/External Devices/
Troubleshooting
Menu list ...............................................................................................................................................................................
Melody List ...........................................................................................................................................................................
List of keypads and character assignments (5-touch input method) .............................................................................
List of keypads and character assignments (2-touch input method) .............................................................................
List of fixed phrases ............................................................................................................................................................
Symbol list ...........................................................................................................................................................................
Pictogram list .......................................................................................................................................................................
Special symbol list ..............................................................................................................................................................
Smiley list .............................................................................................................................................................................
Combination of Multiaccess functions ..............................................................................................................................
Combination of Multitask functions ..................................................................................................................................
Services available for FOMA terminal ...............................................................................................................................
Options and related devices ...............................................................................................................................................
416
429
430
431
432
435
436
441
444
448
450
451
451
Data interchange with external device
Playing movie using FOMA terminal, PC, etc. ..................................................................................................................
452
Troubleshooting
Troubleshooting ..................................................................................................................................................................
Error messages ........................................................................................................................................ Error messages
Warranty and After-Sales Service ......................................................................................................................................
ｉ モード故障診断サイト (i-mode fault diagnostic site) ....................................................................................................
Software update .................................................................................................................................... Software update
Protecting FOMA terminal from hazardous data ............................................................................. Scanning function
Specifications .......................................................................................................................................................................
Savable/Recordable/Protectable number in F906i ...........................................................................................................
SAR certification information .............................................................................................................................................
Export Administration Regulations ...................................................................................................................................
453
456
461
462
463
467
469
471
472
474
415
F906i_E1kou
F906i.book
Page 416
Monday, April 21, 2008
10:59 PM
Menu list
･ Menu list for the case Select startup menu is set to "Basic menu" is described.
･ Settings of menus indicated in blue can be restored to the default in Reset.
a Mail
Menu
Menu
Page
a Inbox
ー
195
# Mail settings
b Compose message
ー
180
#a Alert settings
c Compose Decome-Anime
ー
184
#aa Mail alert
d Unsent messages
ー
195
e Outbox
ー
195
f Check new message
ー
191
g WEBmail
ー
190
h Chat mail
ー
215
i SMS/Area Mail
#ab MessageR alert
#ac MessageF alert
ia SMS
Page
ー
185
Ring alert : Melody/着信音2 (Tone2)
Light alert : Flash/Aqua
Vibrate alert : OFF
Ring time (sec) : 10
94
Ring alert : Melody/着信音2 (Tone2)
Light alert : Flash/Aqua
Vibrate alert : OFF
Ring time (sec) : 10
94
Ring alert : Melody/着信音2 (Tone2)
Light alert : Flash/Aqua
Vibrate alert : OFF
Ring time (sec) : 10
94
iaa Compose SMS
ー
218
iab UIM Inbox
ー
221
#ad Chat mail alert
Alert setting : Same:Mail setting
94
iac UIM Outbox
ー
221
#b Sort method
[Auto-sort ON/OFF]
Inbox, Outbox auto sort : ON
[Inbox, Outbox sort methods]-
205
[Auto add] ON
[Edit signature] ー
206
#da Reply format
Quote : No
Quote characters : >
208
#db Active quick reply
ON
208
#dc Quick reply presets
了解です (I see.)
後で連絡します (I'll contact you later.)
ごめんなさいm(_ _)m (Sorry)
ありがとう(ˆ-ˆ) (Thank you)
OK
208
iad SMS settings
Font type : Japanese
SMS report request : Not request
Keep in SMS center : 3 days
SMSC : DoCoMo
Address : 81903101652
Type of Number : International
iae Check new SMS
ー
220
iba Receive setting
NO
ibb Receive entry
ibc Beep time
220
215
ー
Beep time (1-30 sec) : 10
* Receive option
215
215
ー
190
ー
185
0 Template
0a Decome
Appendix/External Devices/Troubleshooting
#c Signature
#d Reply setting
ib Area Mail
416
Default
0b Decome-Anime
Default
#e Mail group
ー
207
F906i_E1kou
F906i.book
Page 417
Monday, April 21, 2008
Menu
10:59 PM
Default
Page
#f Display settings
Menu
172
PushTalk preferred
79
Show message
210
hd i-mode arv. act:PT
#fb Receive option
OFF
207
he Certificate
#fc Incoming msg. attach
Select All
209
hea Manage certificate*1
#fd Attachment auto-play
Auto play
209
heb Certificate download
#fe Message list
List style : 2 row (addr+sub)
Display preview : Yes
Auto status change : ON
208
MessageR preferred
211
#g Check msg option
Select All
207
b i-mode
Menu
Page
Always ON
#fa Display priority
#ff Auto-display
Default
hc Display light
CA Certificate 1-13, DoCoMo Cert1 : On
ー
172
173
hec Certificate host
Host : DoCoMo
175
hed Skip password
Yes
174
hf Image & Effect
Set image display, Animation : Display
Use phone information : Yes
Sound effect setting : ON
172
hg i-motion
Auto replay setting : Auto Play ON
176
hh Host selection
i-mode (UIM)
171
i Full Browser
Default
Page
a iMenu
ー
158
ia Home
ー
286
b Bookmark
ー
163
ib Bookmark
ー
286
c Screen memo
ー
165
ic Go to location
d Browser history
ー
159
ica Enter URL
icb Entry URL log
ー
286
ー
286
e Go to location
http://
286
162
id Browser history
ー
162
ie Browser settings
iea Home URL
http://www.google.co.jp
fa MessageR
ー
212
ieb Cookie set/delete
Cookie : Valid
291
fb MessageF
ー
212
iec Script setting
291
ー
191
Script Setting : Valid
Window open guard : Invalid
ied Display mode setting
PC mode(full scale)
291
iee Image&Effect setting
Set image display, Animation : Display
Use phone information : Yes
Sound effect setting : ON
292
ief Access setting
No
292
ieg Referer setting
Send
292
ieh Screen view setting
With menu icon view
292
iei Auto-access setting
Confirm each time
292
ea Enter URL
http://
eb Entry URL log
f MessageR&F
fc Check new message
fd Check msg option
Select All
207
g i-Channel
ga i-Channel list
gb i-Channel ticker
ー
Show ticker : Yes
Ticker speed : Moderate
Text size : Medium
Ticker pattern : Pattern 1
gc Reset i-Channel
ー
177
177
178
if Search engine
h i-mode settings
ha Access shortcuts
hb Connection timeout
ー
60 seconds
ー
291
354
164
171
Appendix/External Devices/Troubleshooting
417
F906i_E1kou
F906i.book
Page 418
Monday, April 21, 2008
10:59 PM
c i-αppli
Menu
Menu
a Software list
Default
Page
ー
225
ib Received msg log
* User information
b i-αppli settings
Page
ー
202
Name, Mail address : ー
My phone number : The subscribing
terminal phone number
50
365
ba Sort software
By access time
240
bb Auto start
ON
236
bc Software info disp.
OFF
225
Default
Page
bd Display light
Terminal Setting
227
a My Picture
294
be Vibrate effect
ー
ON
228
b Music
ー
343
ー
236
c Music&Video Channel
ー
338
d i-motion
ー
299
ー
228
e Melody
ー
305
bf i-αppli shortcuts
bg Power saving
bga Preset
e Data Box
Menu
bgb Brightness
Auto adjust
228
f My Document
326
bgc Key lighting
ー
ON
228
g Kisekae Tool
107
bgd Sound effect volume
ー
Level 4
228
h Chara-den
ー
304
c Display history
[Start failure hist., Abnormal exit hist.,
Security error hist. ] ー
226
237
238
i 1Seg
ー
331
* Other
ー
329
Default
Page
ー
153
f LifeKit
d Phonebook & Logs
Menu
a Phonebook
Default
Show all names
Menu
Page
85
a Bar code reader
b Phonebook new entry
ー
83
b Ir/iC/PC connection
c Add group
ー
84
ba Receive Ir data
ー
324
d Phonebook(UIM) new entry
ー
83
bb Send all Ir data
ー
324
e PushTalk phonebook
ー
77
bc Send all via iC
ー
324
f Received calls
ー
55
bd Save received data
ー
g Redial
ー
55
be Data exchange settings
h Ans.Machine&Voice memo
ha Answer machine
OFF
325
End alert : OFF
Auto authentication : OFF
Ph.book image sending : ON
326
Communication mode
316
ー
313
67
bf USB mode settings*2
hb Recorded messages
ー
68
c microSD
hc Record voice memo
ー
368
d Camera
ー
68
da Still camera
ー
141
db Movie camera
ー
145
hd Voice memos
i Mail logs
ia Sent msg log
418
Default
Appendix/External Devices/Troubleshooting
ー
202
F906i_E1kou
F906i.book
Page 419
Monday, April 21, 2008
Menu
e Sound recorder
10:59 PM
Default
Page
ー
147
Menu
ー
91
ー
91
h Pedometer
91
ha Steps/Calories info
gfeb Loc. request-verify
f Data Center
fa Access Data Center
fb Synchronization log
fc Sync setting
Contact image sending : OFF
g GPS
hb Pedometer settings
ga Position location
ー
252
gb i-αppli
ー
254
gc Loc. history
ー
264
Default
Ring alert : Melody/着信音6 (Tone6)
Vibrate alert : Pattern C
Ring time (sec) : 10
Light alert : Turn light on/Grape
ー
Use
Stride (30-120cm) : 60cm
Weight (30-120kg) : 50kg
Page
265
374
373
g Accessory
gd Position settings
gda Post-Position task
Read map
254
gdb Position accuracy
Standard mode
265
gdc Positioning alert
Ring alert, Vibrate alert : OFF
Ring time (sec) : 10
Light alert : Turn light on/Lime
265
ge Loc. notify setting
gea Notify location
Page
ー
356
b Notepad
ー
370
c Alarm clock
ー
355
d Calculator
ー
370
e Dictionaries
ー
263
ー
263
ga Activate
gb Alert&Time settings
f Countdown timer
03 min.
372
354
g Fake call
geba LCS clients list
gebb Position accuracy
Standard mode
265
gebc Positioning alert
Ring alert : Melody/着信音5 (Tone5)
Vibrate alert : Pattern B
Ring time (sec) : 10
Light alert : Turn light on/Amethyst
265
gfa Request permit/deny
Always deny
260
gfb Position accuracy
Standard mode
gfc Service settings
265
ー
Host : DoCoMo
262
262
gfe Positioning alert
Ring alert : Melody/着信音6 (Tone6)
Vibrate alert : Pattern C
Ring time (sec) : 10
Light alert : Turn light on/Grape
ー
Call start time : Ring now
Ring alert : Melody/着信音1 (Tone1)
Alert volume : Level 4
367
367
h Settings & NW services*3
gf Request setting
gfea Loc. request-accept
Menu
ー
geb Notification setting
gfd Service host URL
Default
a Scheduler
265
Menu
Default
Page
a Alerts & Sounds
aa Ring alerts & Sounds
aaa Call ring alert
aaaa Call ring alert
Phone : Melody/着信音1 (Tone1)
aaab V.phone ring alert
Videophone : Melody/ハープ (Harp)
95
aaac P-Talk ring alert
PushTalk : Melody/着信音3 (Tone3)
95
aaad Anonymous caller
[Anonymous/Payphone/Unavailable]
Disable settings
132
95
aab Mail/Msg ring alert
Appendix/External Devices/Troubleshooting
419
F906i_E1kou
F906i.book
Page 420
Monday, April 21, 2008
Menu
aaba Mail ring alert
10:59 PM
Default
Page
Default
Page
Level 4
96
abc GPS alert volume
Level 4
96
95
abd Listen volume
Level 4
96
MessageR : Melody/着信音2 (Tone2)
Ring time (sec) : 10
95
abe Alarm volume
MessageF : Melody/着信音2 (Tone2)
Ring time (sec) : 10
abea Alarm clock sound
Level 4
96
95
abeb Schedule reminder
Level 4
96
abf i-αppli effect sound
Level 4
96
95
aabb Chat M ring alert
Chat mail : Sync msg alert
aabc Msg.R ring alert
aabd Msg.F ring alert
aac GPS alert
aaca Positioning alert
Ring alert : OFF
98
abg ToruCa receive alert
Level 4
96
aacb Loc.Notify alert
Ring alert : Melody/着信音5 (Tone5)
98
abh Operation sound
Level 4
96
aacc Loc. request-accept
Ring alert : Melody/着信音6 (Tone6)
98
abi Melody effect sound
Level 4
96
aacd Loc. request-verify
Ring alert : Melody/着信音6 (Tone6)
98
ac Vibrate alert/effect
acaa Call vibrate alert
OFF
97
acab V.phone vibe alert
OFF
97
acac P-Talk vibrate alert
OFF
97
aca Call vibrate alert
aad Alarm sound
aada Alarm clock sound
aadb Schedule reminder
Alarm clock : Melody/目覚まし時計 (Alarm
clock)
Alarm on time : Melody/時間になりました
(Set time arrives)
Alarm in advance : Melody/もうすぐ予定の
時間です (It's almost schedule time)
96
96
acb Mail/Msg vibe alert
acba Mail vibrate alert
OFF
acbb Chat M vibrate alert
aae System sound
97
ー
97
aaea Keypad sound
Key sound 1
98
acbc Msg.R vibrate alert
OFF
97
aaeb Open/Close sound
Open/close sound 1
98
acbd Msg.F vibrate alert
OFF
97
aaec Display turn sound
Turn sound : Melody/回転音1 (Turn
sound1)
98
acca Positioning vibrate
OFF
97
aaed Shutter sound
Standard
98
accb Loc. notify vibrate
Pattern B
97
aaee Movie camera sound
Standard
98
accc Loc. request-accept
Pattern C
97
aaf Charge alert
ON
99
accd Loc. request-verify
Pattern C
97
aag Call session
acc GPS vibrate alert
acd Alarm vibrate
aaga Status message
On-hold tone : Standard
64
acda Alarm clock
OFF
97
aagb On-hold tone
ENTERTAINER
99
acdb Schedule reminder
OFF
97
aagc Quality alarm
Alarm OFF
99
ace i-αppli effect
ON
97
aagd Reconnect alarm
Alarm OFF
99
ad Silent mode
General
100
aage Low Battery alert
ON
99
ae Ring alert delay
Delayed ring alert : OFF
132
98
af Stereo sound effect
OFF
96
aah Melody Call
ー
ab Adjust volume
aba Call alert volume
420
Menu
abb Mail/Msg alert vol.
Mail : Melody/着信音2 (Tone2)
Ring time (sec) : 10
afa Movie(i-motion)
Level 4
Appendix/External Devices/Troubleshooting
96
F906i_E1kou
F906i.book
Page 421
Monday, April 21, 2008
Menu
10:59 PM
Default
Page
Menu
Default
Page
ー
111
White (terminal color : White), MirrorBlack
(terminal color : Mirror Black), MirrorRed
(terminal color : Mirror Red), Gold
(terminal color : Gold)
107
bcba Outgoing call
Display image : Kisekae Tool
104
bcbb Incoming call
Show image : Kisekae Tool
104
bcbc Videophone dialing
Display image : Kisekae Tool
104
bcbd Videophone receiving
Show image : Kisekae Tool
104
bcbe Contact image
ON
106
bcbf Anonymous caller
[Anonymous/Payphone/Unavailable]
Disable settings
132
afb Melody
ON
96
bbcb Menu design
afc Music player
OFF
96
bc Color & Action image
ag BGM play
ON
349
bca Color scheme
ah FM transmit frequency
84.3MHz
284
[Vertical position/Horizontal position]
Same as Kisekae Tool
101
b Display
ba Stand-by display
baa Image/i-αppli
bab Clock format
bcb Call image
Style : ON/Digital 3 (terminal color : White),
Analogue (terminal color : Mirror Black),
Digital 1 (terminal color : Mirror Red),
Digital 2 (terminal color : Gold)
Time format : 24 hour
Clock layout : Top (terminal color : White,
Mirror Black), Center (terminal color :
Mirror Red, Gold)
Day : English
114
bac Battery icon
bcca Outgoing message
Display image : Kisekae Tool
106
Kisekae Tool
112
bad Signal level icon
bccb Incoming message
Display image : Kisekae Tool
106
Kisekae Tool
112
bccc Image message alert
Display image : Kisekae Tool
106
103
bccd Check msg
Display image : Kisekae Tool
106
bcd Videophone image
[Substitute image]
Image : Default Chara-den
[Answer machine image/Response hold
image/On-hold image/Movie memo
image]
Image : Default
70
[Display light time]
Normal use : 10 sec
AC adapter connected, i-αppli : Terminal
setting
i-mode session, Camera session, Movie
camera session, i-motion : Always on
[Brightness]
Auto adjust
[Keypad light]
Keypad light, Call/Mail light alert : ON
Light color: Rainbow (Key press)
106
bae Info/calendar layout
baf i-Channel ticker
bag Shortcut icons
ー
Show ticker : Yes
Ticker speed : Moderate
Text size : Medium
Ticker pattern : Pattern 1
bcc Mail image
177
ウォーキングチェッカー設定 (Pedometer
settings)
照明／キーバックライト設定 (Display & Key
light)
361
フィンガーポインター設定 (Pointing device)
待受ショートカットの使い方 (Using
Shortcut icons)
bd Display & Key light
bb Menu preference
bba Select startup menu
Kisekae menu
107
bbb My shortcut
Music player, Turn-display option,
Fingerprint access, Lock on close,
Activation option, 2in1 mode switching,
Home, Position location
363
be Light alert
bbc Reset
bbca Operation history
ー
111
Appendix/External Devices/Troubleshooting
421
F906i_E1kou
F906i.book
Page 422
Monday, April 21, 2008
Menu
bea Light alert
beb Call session light
bec GPS light alert
bed IC card light
bee Open/close/turn
10:59 PM
Default
Page
112
During call: Light : ON
Color : Rainbow
113
Lighting pattern for all items : Turn light on
Light color for Position location : Lime
Light color for Notifying location :
113
Amethyst
Light color for Loc. request-accept, Loc.
request-verify : Grape
IC card Light : ON
Color : Lemon
113
Open/Close/Turn : Light : ON
Light color : Soda
113
ca Kisekae Tool
ー
108
cb Style theme
ー
111
cc Timed theme
ー
101
ー
120
daa Lock on close
Lock on close : OFF
dab All lock
dac Personal data lock
129
OFF
122
dad IC card lock
dada Lock/Unlock
OFF
dadb Lock preference
IC card lock
dadc Timed lock
Timed lock : OFF
dadd Programed activation
249
250
250
ー
250
dade IC lock(power-off)
Remain lock status
250
dae Keypad dial lock
OFF
123
Call & Logs* : Hide set contact
Mail & Logs* : Hide secrecy fldrs
Private call act. : Alert+Show No.
Private mail act. : No alert/name/no.
Incoming: privacy mode : OFF
124
My Picture, i-motion : Hide secrecy album
My Document, Other, Bookmark : Hide
secrecy fldrs
Schedule : Hide set schedule
Notepad, i-αppli, Loc. history(GPS), Screen
memo : Show all
125
db Privacy mode
ON
112
bga Font size
Medium(Standard)
113
bgb Font style
Kanji/Alphameric : Maru Gothic
Hiragana/Katakana : Kanji/Alphameric
113
bgc バイリンガル
Japanese
49
dba Call/Mail privacy
bg Font & Language
bh Sub-display
422
106
da Locks
129
bha Clock & alert image
Page
d Security & Locks
Main display info
At call received : Name+Phone No.
Ticker at mail rdvd : Name+Subject
Sub display info
At call/mail received : Name
bfb Indicator light
Default
Clear
c Kisekae/Themes
bf Info display & light
bfa Caller/Sender info
Menu
bhb Sub-display light
Lighting pattern for Call, Mail, MessageR/F,
Videophone and PushTalk : Flash
Light color for Call, Videophone and
PushTalk : Lime
Light color for Mail, MessageR/F and
ToruCa receive : Aqua
Lighting pattern and Light color for Chat
mail : Sync msg alert
Light for ToruCa receive: Light : ON
Clock style, Digital 1 (terminal color : White,
Gold), Digital 2 (terminal color : Mirror
Black, Mirror Red)
Alert image, Incoming mail img : pattern 1
(terminal color : White, Gold), pattern 2
(terminal color : Mirror Black, Mirror
Red)
Appendix/External Devices/Troubleshooting
dbb Other item privacy
dbc Activation option
Activate/Deactivate* : No activation
Auto start : OFF
dbd Contact setting
dc Security indicator
106
ー
ON
125
128
131
F906i_E1kou
F906i.book
Page 423
Monday, April 21, 2008
Menu
dd Receive display option
de UIM
10:59 PM
Default
Page
129
[Change PIN/PIN2 code] 0000
[PIN1 code ON/OFF] OFF
117
0000
117
df Code & Fingerprint
dfa Change security code
Menu
Default
Page
ef Make/Receive call
Main display info
At call received : Name+Phone No.
Ticker at mail rcvd : Name+Subject
Sub display info
At call/mail received : Name
efa Priority comm mode
No Set Up
64
efb Prefix dialing
Prefix1 : 009130010
61
efc Sub address
ON
61
ega Noise reduction
ON
62
egb Close settings
End the call
64
eh Self mode
OFF
122
eg Call session
dfb Register fingerprint
ー
119
dfc Saved fingerprints
f V-phone/P-Talk
ー
120
fa Videophone
119
faa V.phone dialing img.
Display image : Kisekae Tool
104
fab Videophone alert
Ring alert : Melody/ハープ (Harp)
Show image : Kisekae Tool
Vibrate alert : OFF
Light alert : Flash/Lime
94
Auto redial as voice : OFF
Display setting : Both sides
Sub screen : My side
Screen size : Large
Visual preference : Normal
Display light : Auto adjust
Speakerphone : ON
70
fad DataSession arv. act
V.phone priority
71
fae Image setting
[Substitute image]
Image : Default Chara-den
[Answer machine image/Response hold
image/On-hold image/Movie memo
image]
Image : Default
70
Phone
72
dfd Fingerprint access
OFF
dg Scanning function
dga Update
ー
dgb Set auto-update
ー
dgc Set scan
Scan, Message scan : Valid
468
468
468
dgd Version
ー
469
dh Password manager
ー
385
fac Operation
e Call & Answer
ea Sound & Image
eaa Outgoing call
Display image : Kisekae Tool
104
eab Call alert
Ring alert : Melody/着信音1 (Tone1)
Show image : Kisekae Tool
Vibrate alert : OFF
Light alert : Flash/Lime
94
eac Identification mark
Identify No. : OFF
105
eb Anonymous caller
[Anonymous/Payphone/Unavailable]
Disable settings
132
ec Any key answer
ON
63
Headset + speaker
375
ed Headset
eda Alert preference
edb Auto answer setting
Auto answering : OFF
375
edc Headset key control
Control function : OFF
374
eea Specified caller
Reject call
131
eeb Unregistered caller
OFF
133
ee Reject/Accept call
faf External device
fag Notify switchable mode
faga Indication ON
ー
71
fagb Indication OFF
ー
71
fagc Check Indication
ー
71
fb PushTalk (PT)
fba PushTalk alert
Ring alert : Melody/着信音3 (Tone3)
Vibrate alert : OFF
Light alert : Flash/Lime
94
Appendix/External Devices/Troubleshooting
423
F906i_E1kou
F906i.book
Page 424
Monday, April 21, 2008
Menu
10:59 PM
Default
Page
Default
Page
ー
368
ー
369
ー
370
gfc Memory status
ー
321
gfd Confirm
ー
375
gfe Battery level
ー
47
gff Area service status
ー
412
gfg Reset
ー
376
gfh Delete all data
ー
376
Ring time (sec) : 30
78
gf Info & Reset
fbc PushTalk auto answer
OFF
78
gfa Call duration
fbd PushTalk arv. act
Answer
79
gfb Call cost
fbe Setting when folded
Speakerphone
79
gfba Last call cost
fbf i-mode arv. act:PT
PushTalk preferred
79
gfbb Call cost limit
fbg P-Talk speakerphone
ON
79
gfbc Hide call cost icon
g Clock & Misc.
ga Turn-display option
gfbd Reset call cost
Stand-by turned right : 1Seg
Stand-by turned left : Camera
Mailer turned right : Smiley
Mailer turned left : Deco-mail pictures
Receiving call : With vertical style
365
Auto time adjust : ON
Offset : +/00h00m
49
gbb Auto power ON
Auto power ON : OFF
354
gbc Auto power OFF
Auto power OFF : OFF
354
gbd Clock display format
Style : ON/Digital 3 (terminal color : White),
Analogue (terminal color : Mirror Black),
Digital 1 (terminal color : Mirror Red),
Digital 2 (terminal color : Gold)
Time format : 24 hour
Clock layout : Top (terminal color : White,
Mirror Black), Center (terminal color :
Mirror Red, Gold)
Day : English
114
OFF
356
h NW Services
ー
101
ha Voice Mail
gca Save word
ー
384
gcb DL dictionary
ー
385
gcc Reset prediction
ー
380
gcd Save phrase
ー
382
Input method : 5-touch
Input prediction : ON
Auto cursor : Normal
386
Medium(Standard)
113
gb Clock
gba Date & time*4
gbe Alarm auto power ON
gbf Timed theme
gfi Initial setting
gc Text input
gce Text input method
gd Font size
Appendix/External Devices/Troubleshooting
ー
463
Alert : OFF
369
OFF
369
[Date & time] Auto time adjust : ON
[Password] 0000
[Fingerprint] OFF
[Keypad sound] Key sound 1
Text size : Medium(Standard)
[Request permit/deny] Always deny
48
gg Side key shortcut
Up Key: Press & hold : Silent mode ON/OFF
Down Key: Press & hold : Check new
365
message
gh Pointing device
Use sensor for: All function
Sensitivity, Double-tap speed : Normal
40
gi Motion sensor
ON
41
haa Voice Mail service
ge Software update
424
Menu
fbb PushTalk ring time
F906i_E1kou
F906i.book
Page 425
Monday, April 21, 2008
Menu
10:59 PM
Default
Page
Menu
Default
haaa Activate
ー
hdba Activate
ー
haab Set ring time
ー
hdbb Deactivate
ー
haac Deactivate
ー
hdbc Check setting
ー
haad Check setting
ー
he Roaming guidance
haae Play messages
ー
hea Activate
ー
haaf Voice Mail setting
ー
heb Deactivate
ー
haag Check messages
ー
hec Check setting
ー
hab Tone/Vibration message notification Voice Mail alert : ON
Notification melody : 着信音1 (Tone1)
388
ー
ー
hfc Stop forwarding
hacb Deactivate
ー
ー
hfd Check fwd setting
hacc Check setting
ー
ー
hg 2in1 setting
had Hide Voice Mail icon
ー
hga 2in1 mode switching
Dual mode
hgb Ph.book 2in1 setting
ー
hba Call waiting
ー
hbab Deactivate
ー
hbac Check setting
ー
hgca For Dual mode
[Vertical position] シティ (City)
[Horizontal position] ビーチ (Beach)
hgcb For B mode
[Vertical position] プラント (Plant)
[Horizontal position] チューリップ (Tulip)
389
hbb Call forwarding
hbba Activate
ー
hbbb Deactivate
ー
hbbc Register The Forwarding Number
ー
hbbd Setting if forwarding number busy
ー
hbbe Check setting
ー
hgd Set call/receive No.
hca Create message
ー
Only with Caller ID
hgda Ring alert for No.B
[Call ring alert] Phone : Melody/着信音4
(Tone4)
[Videophone ring alert] Videophone :
Melody/Jam Ring
394
[Mail ring alert] Ring alert : You've got mail
Ring time (sec) : 10
hgdb Identification mark
Number A Identify No. : OFF
Number B Identify No. : ON
Mark : <<>>
390
hc Chaku-moji
57
57
hd Caller ID
hge 2in1 function OFF
hda Caller ID notification
hgf Receive avoidance
hdaa Activate/Deactivate
ー
hdab Check setting
ー
hdb Caller ID request
397
hgc Stand-by display
hbaa Activate
hcb Message display settings
413
OFF
hfb Start forwarding
haca Activate
hb Call waiting/forward
391
hf OFFICEED
hfa Area display setting
hac Notify missed call
Page
50
ー
hgfa Change rcv. avoidance
ー
hgfb Check rcv. avoidance
ー
hgfc Mode link for avoid.
ー
hgfd Rcv. avoidance(Int.)
ー
Appendix/External Devices/Troubleshooting
425
F906i_E1kou
F906i.book
Page 426
Monday, April 21, 2008
Menu
hh Melody Call
10:59 PM
Default
Page
ー
98
Menu
hi Other
higb Check setting
hia Additional service
higc Number Setting
hiaa Register USSD
ー
hiab Record reply message
ー
398
hib Remote control
hiba Activate
ー
hibb Deactivate
ー
hibc Check setting
ー
393
hic Nuisance call barring
ー
Basic Number : Name : 基本契約番号 (Basic
Number)
Phone number; The subscribing terminal
phone number
Additional No1 : Name : 付加番号1
(Additional No1)
Additional No2 : Name : 付加番号2
(Additional No2)
Additional No1/No2 Phone number : Not
recorded
Multi number call : Disable
ー
hicb Register selected No
ー
hicc Delete all entries
ー
hicd Delete last entry
ー
hiha Activate
ー
hice Check the number of entries
ー
hihb Deactivate
ー
hihc Check setting
ー
higd Incoming calls melody setting
391
hida Guidance setting
ー
hidb Check setting
ー
392
hiea Dual Network Switching
ー
hieb Check setting
ー
392
hif Service numbers
hifa ドコモ故障問合せ
ー
hifb ドコモ総合案内・受付
ー
Appendix/External Devices/Troubleshooting
393
[Additional No1/Additional No2] Individual
setting : OFF
hih Set arrival act
hii Arrival call act
Answer
392
393
i Roaming/Call assist
ia Int'l roaming
hie Dual network
hig Multi number
Page
ー
hica Register the caller
hid English guidance
426
Default
higa Set Multi Number
392
iaa Network search mode
Auto
411
iab 3G/GSM setting
Auto
412
iac Disp. operator name
Display ON
413
iad Voice mail(Int.)
F906i_E1kou
F906i.book
Page 427
Monday, April 21, 2008
Menu
10:59 PM
Default
Page
Menu
Default
Page
ー
245
iada Activate
ー
c ToruCa content
iadb Deactivate
ー
d IC card settings
iadc Play messages
ー
da Lock/Unlock
OFF
249
iadd Voice mail settings
ー
db Lock preference
IC card lock
250
iade Set ring time
ー
dc Timed lock
Timed lock : OFF
iae Call forwarding(Int.)
414
iaea Activate
ー
de IC lock(power-off)
iaeb Deactivate
ー
e ToruCa setting
iaec Call fwd. settings
ー
ea ToruCa alert
iaf Remote control(Int.)
ー
iag Caller ID request(Int.)
ー
iah Roaming guidance(Int.)
ー
ー
iaib Accept incoming call
ー
iaic Check setting
ー
414
ib Int'l call assist
iba Auto switch
Country code : ON (Country code : +81,
Country name : 日本(Japan))
Intn'l prefix : ON (Name : World Call, Intn'l
prefix No. : 009130010)
60
ibb Country code setting
ー
61
ibc Auto assist setting
ー
61
ic Two time zone clocks
ON
250
250
Light alert : ON
Light color : Aqua
Receive alert volume : Level 4
248
eb ToruCa preference
ToruCa receive, Duplication check, Autodisplay : ON
Auto-sort : OFF
248
ec ToruCa auto-read
ON
248
ed ToruCa sort rule
ー
248
f Check IC owner
ー
244
g Change IC owner
ー
244
h Search by i-mode
ー
242
Default
Page
0 User information
Menu
User information
Name/Mail address : ー
My phone number : The subscribing
terminal phone number
413
i MUSIC
ー
Remain lock status
iai Bar calls at roaming
iaia Bar incoming call
250
dd Programed activation
50
365
# 1Seg
Menu
Default
Page
Default
Page
a Music player
ー
343
a Activate 1Seg
ー
272
b Music&Video Channel
ー
334
b Program guide
ー
275
c Saved image/video
ー
331
d Booking list
ー
275
e Recording result
ー
278
* Osaifu-Keitai
Menu
Menu
Default
Page
a IC card content
ー
243
f TVlink
ー
279
b DCMX
ー
243
g Channel list
ー
270
Appendix/External Devices/Troubleshooting
427
F906i_E1kou
F906i.book
Page 428
Monday, April 21, 2008
Menu
10:59 PM
Default
Page
h User setting
ha Display setting
hb Sound setting
Light setting : Auto adjust
Display subtitle : In silent mode
Subtitle size : Medium(Standard)
Subtitle language : 1st language
Incoming msg ticker : Not display
282
Switch sound : 1st sound
Main <> sub sound : Main sound
282
hc Data broadcasting
hca Connection timeout
60 seconds
282
hcb Image & Effect
Set image display, Animation : Display
Sound effect setting : ON
172
hcc Restore storage area
ー
hcd Reset permit status
ー
282
282
hd Close setting
Continue
283
he Record setting
Record to : Phone
Record time : Unspecified
283
*1
*2
*3
*4
All certificates saved in UIM are valid by Reset.
When USB Cable is connected, default settings are not restored by Reset.
For the network service, refer to "Mobile Phone User's Guide [Network Services]".
Reset causes the settings of Auto time adjust (including Time zone and Summer time) and Offset to be restored to the default.
When "Simple Menu" of Kisekae Tool is set
aでんわ
a電話帳検索
cカメラ
b電話帳登録
bメール
aｉMenu
aソフト一覧
b待受画面設定
c待受画面設定
dｉモード
fデータBOX
g設定／ス
a音／バイブ
テーショナリー bディスプレイ
cｉアプリ設定
c目覚まし
aマイピクチャ
d電卓
e伝言メモ一覧
bBookmark
bｉモーション
e伝言メモ設定
fプロフィール情報
cラストURL
cメロディ
f情報表示／リセット
a受信メール
d画面メモ
dマイドキュメント
b送信メール
eｉチャネル一覧
eキャラ電
c未送信メール
fテロップ表示設定
d新規メール
eｉモード問合せ
* "Simple Menu" is disabled when the screen display is English.
428
eｉアプリ
bマイピクチャ
cリダイヤル
d着信履歴
aカメラ
Appendix/External Devices/Troubleshooting
g留守番電話
0プロフィール情報
F906i_E1kou
F906i.book
Page 429
Monday, April 21, 2008
10:59 PM
◆ Melodies for mail attachment
Melody List
Melody ([ ] is the composer)
◆ Melodies for ring tone
Melodies in blue letters support 3D sound.
Melody ([ ] is the composer)
誕生日 (Birthday)
ウィリアムテル序曲 (William Tell Overture)
[GIOACCHINO ANTONIO ROSSINI]
結婚行進曲 (Wedding March)
[BARTHOLDY FELIX J L
MENDELSSOHN]
祝婚歌 (Bridal March) [RICHARD WILHELM
WAGNER]
着信音1-6 (Tone 1-6)
Turning off
でか着信音 (Loud tone)
Satellite
運命 (Symphony No.5) [VAN LUDWIG
BEETHOVEN]
ジングルベル (Jingle Bells) [JAMES
PIERPONT]
SWEET RASPBERRY
Manhattan Blue
ツィゴイネルワイゼン (Zigeunerweisen)
[Pablo de Sarasate]
タフワフワイ (TAFUWA HUWAI)
[Hawaiian folk song]
さくら (SAKURA) [Japanese folk song]
ラデツキー行進曲 (Radetzky March)
[Johan Strauss]
紅葉 (MOMIJI) [TEIICHI OKANO]
雪 (Snow) [School song]
Jupiter[Gustav Holst]
Joy Rhythm
登場 (Appearance)
Jam Ring
Just Ride
おもちゃの兵隊のマーチ (Parade der
Zinnsoldaten) [LEON JESSEL]
Healing
SHORT SOUND1-9
3•3•7拍子 (Three-three-seven beats)
Are you sleeping? [French folk song]
メールがきたぁ (A mail has come)
It's time to get up
You've got mail
トッカータとフーガ (Toccata and fugue) 子守唄 (Lullaby) [FRANZ SCHUBERT]
[JOHANN SEBASTIAN BACH]
黒電話 (Phone)
ハープ (Harp)
目覚まし時計 (Alarm clock)
もうすぐ予定の時間です (It's almost
schedule time)
時間になりました (Set time arrives)
回転音1-3 (Turn sound 1-3)
Pool Bar
蛍の光 (Auld Lang Syne) [Scottish folk
song]
ハッピー (Happy) お出掛け (Outing) スキップ
(Skip) メリーゴーランド (Merry Go Round) 安
らぎ (Relax) 頑張れ (Cheer up) ヤッター
(Goody) ファイト (Fight) 焦燥 (Impatient) 16
ビート (16 Beat) 忙しい (Busy) エレクトロ
(Electro) ハーモニカ (Harmonica) 迷宮
(Labyrinth) タンゴ (Tango) エキゾチック
(Exotic) アジアン (Asian) 中華 (Chinese) 南国
(Southern country) 琴 (Koto)
草津節 (Kusatsubushi) [Japanese folk
song]
お祭り (Festival) 悲哀 (Sadness) 不安
(Anxiety) がっくり (Bummage) 発見
(Discovery) チャイム (Chime) お知らせ
(Information)
無音 (Silent)
Appendix/External Devices/Troubleshooting
429
F906i_E1kou
F906i.book
Page 430
Monday, April 21, 2008
10:59 PM
List of keypads and character assignments (5-touch input method)
Hiragana/Kanji mode
(two-byte)
Key
Alphabet mode
(two- or one-byte)
Numeric mode
(two- or one-byte)*1
： ∼* ＿ 1
あ い う え お
ア イ ウ エ オ 1
か き く け こ
カ キ ク ケ コ 2
a b c
さ し す せ そ
サ シ ス セ ソ 3
た ち つ
て と
タ チ ツ テ ト 4
な に ぬ ね の
ナ ニ ヌ ネ ノ 5
は ひ ふ へ ほ
ハ ヒ フ ヘ ホ 6
m n o
ま み む め も
マ ミ ム メ モ 7
p q r s
や
ヤ
ら り る れ ろ
わ
Change upper/lower case, add voiced/ Change upper/lower case, add voiced/ Change upper/lower case, insert a line feed
semi-voiced sound, insert a line feed semi-voiced sound, insert a line feed
、
ゆ
を
。
よ
ん
？
ー
！
・
*1
*2
*3
*4
ユ
ヨ
■
、
。
？
．
ラ リ ル レ ロ 9
ワ*
ヲ ン ー 0
430
Katakana mode
(two- or one-byte)
！
・
■
／
−
w x y z
’-
¥
■
* You can enter only in one-byte character.
@docomo.ne.jp .com .or.jp .go.jp
.ne.jp .co.jp .ac.jp http://www. www.
.html .htm
: One-byte space
: Holding down the keypad also switches upper and lower case.
Characters of "＊", "#", "P", "T" and "+" can only be entered in the field that supports them.
"~" is entered in the one-byte mode.
Switch upper and lower cases only in two-byte mode.
Press the relevant key for 1 second or more to enter the character.
Appendix/External Devices/Troubleshooting
＠
0 ＋*
＊ P*
＃ T*
F906i_E1kou
F906i.book
Page 431
Monday, April 21, 2008
10:59 PM
List of keypads and character assignments (2-touch input method)
■ Hiragana/kanji mode (two-byte)
Key
い
き
し
ち
に
ひ
み
（
り
を
う
く
す
つ
ぬ
ふ
む
ゆ
る
ん
え
け
せ
て
ね
へ
め
）
れ
ﾞ*2
Second digit
お
こ
そ
と
の
ほ
も
￥
よ
＊
ろ
ﾟ *3
？
＆
＃
！
、
／
。
*1
■ Katakana mode (two or one-byte)
Key
First digit
ア
カ
サ
タ
ナ
ハ
マ
ヤ
ラ
ワ*
イ
キ
シ
チ
ニ
ヒ
ミ
（
リ
ヲ
ウ
ク
ス
ツ
ヌ
フ
ム
ユ
ル
ン
エ
ケ
セ
テ
ネ
ヘ
メ
）
レ
ﾞ*
Second digit
オ
コ
ソ
ト
ノ
ホ
モ
￥
ヨ
＊
ロ
ﾟ*3
？
＆
＃
！
、*
*5
*5
／
*6
。
*1
Key
First digit
First digit
あ
か
さ
た
な
は
ま
や
ら
わ
■ Alphabet mode (two or one-byte)
＝
＾
＄
＞
＿
∼*
（
％
＠
Second digit
＋
＜
¦
￥
）
＊
？
＆
＃
！
*4
、
−
*5
*5
／
*6
。
*1
: Blank
*1 Upper case mode and lower case mode are switched.
*2 "゛" is entered in upper case mode, and "、(,)" is entered in lower case mode.
*3 "゜" is entered in upper case mode, and "。(.)" is entered in lower case mode.
*4 "," is entered in the one-byte mode.
*5 This character becomes blank in the one-byte mode.
*6 "." is entered in the one-byte mode.
*7 Switch upper and lower cases only in two-byte mode.
*8 "~" is entered in the one-byte mode.
･ Pressing * after the entry can add or switch voiced/semi-voiced sound or
switch upper/lower case.
Appendix/External Devices/Troubleshooting
431
F906i_E1kou
F906i.book
Page 432
Monday, April 21, 2008
10:59 PM
List of fixed phrases
･ Pictogram string (16 items)
･ Decoration line (5 items)
･ Address data format (11 items)
http://www.
http://
@docomo.ne.jp
.net
.or.jp
.go.jp
.ac.jp
xxxx/xx/xx xx:xx ∼ xxxx/xx/xx xx:xx Schedule
.com
* The current date/time is entered in "xxxx/xx/xx xx:xx".
･ Business (14 items)
いつもお世話になっております。○○の○○です。
本日はお忙しいところお時間をいただき、誠にありがとうございました。今後ともよろしくお願いいたします。
本日の会議は○○のため中止となりました。ご周知ください。
本日の会議は○○のため○○に延期となりました。ご確認ください。
只今会議中のため、電話に出ることができません。○○後に折り返しご連絡いたします。
只今移動中のため、電話に出ることができません。○○後に折り返しご連絡いたします。
今、○○です。これから帰社します。帰社予定時刻は○○頃です。
今、○○です。このまま帰宅します。
これから出社します。○○頃になります。
これからお伺いさせていただきます。本日の待ち合わせ時間は○○で変更ございませんでしょうか。
只今○○へ出張中です。会社に戻るのは○○の予定です。
○○の件につき、ＰＣにメールを入れておきました。ご確認の程、よろしくお願いいたします。
○○の件につき、至急確認したいことがございます。ご連絡ください。
本日、○○のため、欠勤させていただいております。
432
Appendix/External Devices/Troubleshooting
.ne.jp
.co.jp
F906i_E1kou
F906i.book
Page 433
Monday, April 21, 2008
10:59 PM
･ Private (14 items)
今日は一日お疲れ様でした。明日もお互い頑張りましょう。
今日は一日ありがとう。とても楽しかったです。
○○で○○といういいお店を見つけました。今度一緒に行きませんか？
今日、○○という映画を観てきました。とても良かったです。今度是非観てみてください。
今日のデートはどこに行きたい？○○なんてどうかな？
○月○日にみんなで○○へ行く計画をしています。ご一緒にいかがですか？
アドレスを変更しました。新アドレスは@docomo.ne.jpです。電話帳の登録変更をお願いいたします。
○○で○○時に待ち合わせしましょう。よろしくね。
○月○日、飲みに行きませんか？久しぶりにみんなと楽しく飲みたいです。
○月○日、○○へ遊びに行きませんか？久しぶりにみんなと会いたいです。
○月○日の予定はいかがですか？一緒に○○なんてどうかなと思って。
明日はいよいよ、待ちに待った○○です。今日はゆっくり休んで明日に備えましょう。
体調はどうですか？無理しないでゆっくり休んでくださいね。早く良くなりますように。
本日、○○時から○○チャンネルのテレビ番組の録画をお願いいたします。
･ Phrase samples (16 items)
【xxx】appearing in the beginning is not entered.
【寒中見舞】寒さ厳しき折、お変わりございませんか。ご自愛なさいますようお祈り申し上げます。
【暑中見舞】暑中お見舞い申し上げます。時節柄、ご健康には十分ご留意のうえご活躍くださいますよう心から祈念いたしております。
【御礼】時下益々ご盛栄のこととお慶び申し上げます。この度はご丁寧なお心遣いをいただき、厚く御礼申し上げます。
【残暑見舞】残暑お見舞い申し上げます。残暑ことのほか厳しい折柄、皆様のご健康をお祈り申し上げます。
【結婚祝】時下益々ご清栄のこととお慶び申し上げます。この度はご結婚おめでとうございます。お二人の門出を心より祝福申し上げます。
【出産祝】時下益々ご清祥のこととお慶び申し上げます。この度はご出産おめでとうございます。お子様の壮健なご成長を祈念いたします。
【入学祝】ご入学おめでとうございます。充実した学生生活を送り、さらに大きく飛躍されることをお祈りいたします。
【卒業祝】ご卒業おめでとうございます。新しい人生の門出を心よりお祝い申し上げます。
【就職祝】ご就職おめでとうございます。ご健康に留意され、ご活躍を心よりお祈り申し上げます。
【病気見舞】お体の具合はいかがでしょうか。一日も早いご回復をお祈り申し上げます。
【転居案内】転居のご案内を申し上げます。住所、電話番号などは改めてお知らせいたします。取り急ぎご連絡まで。
【詫状】この度は多大なご迷惑をおかけし、誠に申し訳ございません。何卒ご寛容の上、引続きご愛顧賜りますようお願い申し上げます。
【誕生日祝】心から○○様のお誕生日をお祝いいたしますとともに、今後のご健康とご繁栄を祈念いたします。
Appendix/External Devices/Troubleshooting
433
F906i_E1kou
F906i.book
Page 434
Monday, April 21, 2008
10:59 PM
【成功祝】ご成功の報に接し、心よりお祝い申し上げますとともに、今後益々のご活躍を祈念いたします。
【就任祝】この度のご就任、心からお喜び申し上げます。今後益々のご健勝とご隆盛をお祈りいたします。
【人事異動通知】この度弊社の人事異動により○○へ異動となりました。今後ともご指導ご鞭撻の程、宜しくお願いいたします。
･ Pictogram supported (22 items)
おはよう
今日も一日頑張ろう
おやすみ
おやすみ
いい夢見てね
ありがとう
ごめんなさい。遅れます
もう少し待ってください
さようなら
今日はとても楽しかったです
お久しぶりです 元気
また連絡してね
深く反省してます
今、終わりました
また会える日を楽しみにしてます
これから帰ります
はじめまして ちゃんとメール届いてる
？
最近の調子はどう
今日の都合はどう
旅行でも行きませんか
また明日ね
お腹すいたな。食事に行きませんか
？
今日何時に終わる
あとで連絡します
連絡ください
今日は外食します
了解しました
あなたにお任せします
すぐに戻ります
？
？
じゃあね
･ English phrases (46 items)
Hello! How are you?
434
Hi! What's up?
Long time no talk. How are you doing?
Good morning. Have a nice day!
Good night.
Good-bye. Talk to you soon.
See you. Bye ;-)
I had fun today, thanks.
Thanks :-)
Thanks, but no thanks.
Please accept my apologies.
Get my message?
I'll contact you later.
I'll be late, but hope you'll wait for me. Thanks.
I'll be there soon, so please wait for me. Thanks.
Give me a call or send me a message. Thanks.
I'm leaving work. See you soon.
I'm getting back to my office. Any messages to me?
I'll eat out.
Let's go get a drink!
Let's go eat!
Sorry, but I'm busy.
When will you get off work today?
What's on for today?
I'll leave it to you.
Good for you!
Appendix/External Devices/Troubleshooting
F906i_E1kou
F906i.book
Page 435
Monday, April 21, 2008
10:59 PM
Hope you do your best.
Are you OK?
Cheer up! You can make it.
I have some good news.
I have some bad news.
Really? No kidding!
I can't believe it!
Keep in touch!
Have a nice weekend!
All right. Okay.
Wonderful! Super!
It's my favorite.
I love you. I miss you.
I'm very happy.
I'm sad….
I give up!
Welcome!
Happy birthday!
Happy New Year!
Happy holidays!
･ My phrase (up to 50 items)
The stored fixed phrases are displayed.
Symbol list
One-byte
Two-byte
: Blank
* Some may differ from actual displays.
Appendix/External Devices/Troubleshooting
435
F906i_E1kou
F906i.book
Page 436
Monday, April 21, 2008
10:59 PM
Pictogram list
You can convert characters by entering the readings in hiragana/kanji mode.
Pictogram
Reading
Reading
はな、かわいい
はーと、あい、こころ、どきどき、すき、らぶ、ゆれるはーと
きす、きっす、くちびる、くち、ちゅ、ちゅう、ちゅー、きすまー
く
はーと、しつれん、ふられた、わかれた、しょっく
はーと、あい、こころ、すき、らぶ、はーとたち
かお、えがお、わらう、わらい、わーい、うれしい、にこにこ
かお、おこる、いかり、ぷん、ちっ
かお、かなしい、こまった、ごめん、がく
かお、かなしい、こまった、さいあく、もうやだ
かお、だめ、ふら
どうぶつ、いぬ
どうぶつ、ねこ
てんき、はれ、たいよう
てんき、くもり、くも
てんき、あめ、かさ
てんき、ゆき、ゆきだるま
てんき、かみなり、いかずち、いかづち、でんき
てんき、うずまき、たいふう、あらし、ぐるぐる、くるくる、めま
い
てんき、きり、あめ
てんき、こさめ、あめ、かさ
おんぷ、おんがく、うた、るん
おんぷ、おんがく、うた、さんれんぷ、るん、むーど
おんせん、ふろ、おふろ、いいきぶん
436
Pictogram
はーと、あい、こころ、すき、らぶ
Appendix/External Devices/Troubleshooting
きらきら、ぴかぴか
でんきゅう、ぴか、あいであ、あいでぃあ、ひらめき
いかり、おこる、おこり、きれる、むかつく、むか
がんばる、がんばれ、ぱんち、ぐー、ぐう
ばくだん、ばくはつ
おやすみ、すいみん、ねる、ねむい、ぐー、ずー、ぐう、ずう
びっくり、あっ、えくすくらめーしょん、えくすくらめいしょん
びっくり、ほんと、えっ、えー、えくすくらめーしょん、えくすく
らめいしょん
びっくり、ちょー、えくすくらめーしょん、えくすくらめいしょん
しょっく、ぐらぐら、どん
あせ、あせる、ひやあせ
あせ、あせる、ひやあせ、なみだ、だらー、たらー
いそぐ、いそげ、だっしゅ、ためいき、ふぅ、ふう、ふー、はしる
のばす、ちょうおん、ちょーおん
のばす、くるり、ちょうおん、ちょーおん
おっけー、おーけー、おーけい、おうけい、けってい
やじるし、みぎうえ、あがる、あげる、あっぷ、みぎななめうえ
やじるし、みぎした、さがる、さげる、だうん、みぎななめした
やじるし、ひだりうえ、あがる、あげる、あっぷ、ひだりななめう
え

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2008:05:23 14:00:22+09:00
Create Date                     : 2008:05:23 14:00:12+09:00
Metadata Date                   : 2008:05:23 14:00:22+09:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : F906i.book
Creator                         : DocMaker
Document ID                     : uuid:e311b734-0160-4867-bffd-4e0d8387bcf2
Instance ID                     : uuid:2b309d3e-f1d1-4ddd-9493-4d3e88bce7ad
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Has XFA                         : No
Page Count                      : 62
Author                          : DocMaker

EXIF Metadata provided by EXIF.tools