Furuno USA 9ZWRTR107 Transceiver for Radar model FAR-3230S/3330S User Manual

Furuno USA Inc Transceiver for Radar model FAR-3230S/3330S

UserManual.wiki >

9ZWRTR107 User Manual >

Contents

1. User Manual
2. Users Manual

Users Manual

18-118. TT AND AIS DISPLAYSTracked targets and AIS targets can be overlaid on the chart. Only the differences be-tween the radar and chart TT and AIS displays are described here.The data of received radar-tracked targets must have reference to ground. If the data does not meet that criteria, target vectors are not shown and the indications COG and SOG in the TT info data box show [missing].18.1 TT Display18.1.1 TT symbolsRefer to paragraph 3.7.1.18.1.2 TT symbol color and sizeDo the following to select TT symbol color and size. Note that the color of the AIS sym-bol is also changed.1. Click the [DISP], [SET] and [Symbol DISP] buttons on the InstantAccess bar to show the [Symbol Display] menu.2. Click the [Targets] tab.3. Select the color among, green, blue, black, magenta and brown, with the [Color] pull-down list.4. Select the size from standard or small, with the [TT Size] pull-down list.

18. TT AND AIS DISPLAYS18-218.1.3 How to display tracked target dataControl Unit: Put the cursor on a target then push the TARGET DATA key.Trackball module: Click the target for which you want to show its data.To erase data from a data box, click the appropriate close data button.The basic target data display for a TT consists of the following information:• Target's number. Target numbering starts from "01". When a target is erased the number will not be reused until the power is re-set or more than 200 targets are ac-quired.• Bearing (BRG) and distance (RNG) of the target from own ship• True speed (SOG) and true course (COG) of the target• CPA and TCPA. A negative TCPA value means that you have already passed the closest point and the TT is going away from own ship.• Bow Crossing Range (BCR) and Bow Crossing Time (BCT)Title barTT No.BearingRangeCourse over groundSpeed over groundCPATCPABow crossing rangeBow crossing time

18. TT AND AIS DISPLAYS18-318.1.4 Past position point attributesYou can define past position point attributes for tracked targets by points and style.1. Click the [DISP], [SET] and [Symbol DISP] buttons on the InstantAccess bar to show the [Symbol Display] menu.2. Click the [Targets] tab.3. At [TT Points], select the number of points to show.4. At [Style], select the style for the past position points. The choices are [Points] and [Points and Dots].18.1.5 How to set the TT lost target filterIf you are in a congested area the lost target alert may sound against many AIS tar-gets. In this case, you can prevent the alarm from sounding against TT that are be-yond a certain range and/or smaller than a specific length.1. Open the MENU and select [TT/AIS] and [Setting] then click the [Setting.2] tab.2. In the [TT Lost Target Filter] window, set the maximum range to track a target.[Max Range]: The maximum range at which to track a lost target. A tracked target not within this range is not tracked.3. Click the [ON/OFF] button to show ON or OFF as appropriate.18.1.6 TT recording functionsTracked target information is saved to the [Danger Targets] log. See section 19.5.

18. TT AND AIS DISPLAYS18-418.2 AIS Display18.2.1 AIS symbolsRefer to section 4.3.18.2.2 Voyage dataBefore you embark on a voyage, set your navigation status, ETA, destination, draught and crew, on the [Voyage Data] page in the [NAV Status] menu. The data entered here is reflected to the AIS transponder.Note: [Persons], the total number of persons onboard, should be set at the AIS tran-sponder. Some AIS transponders may not accept this input from the radar.1. Open the MENU then click both [NAV Status] in the [TT/AIS] menu and the [Voy-age Data] tab.2. Click the [Navigational Status] drop-down list then select your navigational status, from the list below.3. Enter ship's draught (0.0 - 25.5 (m)) at [MAX Draught].4. Enter your ETA at [ETA].Day: two digitsMonth: Three-character abbreviationYear: Four digits5. Enter your destination at [Destination], using a maximum of 20 characters.6. Click the [Save] button to save the settings.• [Underway using engine]• [At anchor]• [Not under command]• [Restricted maneuverability]• [Constrained by her draught]• [Moored]• [Aground]• [Engaged in fishing]• [Under way sailing]• [Reserved for high speed craft]• [Reserved for wing in ground]• [Reserved for future use] (x3)• [AIS-SART (active)]• [Not defined]

18. TT AND AIS DISPLAYS18-518.2.3 How to filter AIS targets1. Right-click [AIS] on the [TT/AIS] page in the [NAV Tools/Overlay box], select [Set-ting] and open the [Setting.1] page.(The [Setting.1] page can also be opened from the menu (MENU → [TT/AIS] → [Setting] → [Setting.1].)2. In the [AIS DISP Filter] window, set each item referring to the description below.• Click the buttons of [Sleeping Class A] and [Sleeping Class B] to show [OFF] or [ON] to hide or show those targets.• Set the maximum range with [Max Range]. Any target beyond the range set here will not be displayed.• Set the ship speed for AIS targets, with [Min Ship Speed]. Any AIS target whose speed is lower than that set here will not be displayed.3. Click the [Save] button to save settings. Click the [Close] button to close the dialog box.Note: AIS and tracked target viewing limitations are as follows:AIS and tracked targets are displayed on top of chart 1:1,000,001 for S57 charts.18.2.4 How to set conditions for automatic activation of sleeping tar-getsThe AIS target automatic activation feature is turned on or off from the [TT/AIS] page in the [Overlay/NAV Tools] box. Set the conditions for automatic activation as shown below. The CPA/TCPA alarm must be active to get automatic activation of AIS targets.Right-click [AIS] on the [TT/AIS] page in the [NAV Tools/Overlay box], select [Setting] and open the [Setting.1] page.

18. TT AND AIS DISPLAYS18-618.2.5 How to sleep all activated targetsYou can sleep all activated targets. Right-click [AIS] on the [TT/AIS] page in the [NAV Tools/Overlay box], select [Setting] and open the [Setting.1] page. Click the [Sleep All Targets] button to sleep all activated targets.18.2.6 How to set the AIS lost target filterYou can select what AIS targets to exclude from the AIS lost target alert, on the [Set-ting.2] page in the [TT/AIS] menu.[Max Range]: Set the max. range at which a target must be to be declared a lost target.[Min Ship Speed]: A tracked target whose speed is slower than set here does not trig-ger the lost target alarm.[Except Class B]: Exclude class B AIS targets from the AIS lost target alert.

18. TT AND AIS DISPLAYS18-718.2.7 How to display AIS target dataNormal dataPut the cursor on an AIS target then push the left button. Title barMMSIBearingRangeCourse over groundSpeed over groundCPATCPABow crossing rangeBow crossing timePosition“Level of detail” buttonHeadingNavigation statusRate of turnScroll buttons*Close buttonVessel name*: Scroll buttons appear when there are multiple AIS targets.

18. TT AND AIS DISPLAYS18-8Expanded dataPut the cursor on a desired AIS target then push the left button. Click the [Expand] but-ton (level of detail) on the [AIS Info] box to show expanded AIS data. Title barMMSIBearingRangeCourse over groundSpeed over groundCPATCPABow cross rangeBow cross timePosition“Level of detail” buttonHeadingNavigation statusRate of turnScroll buttons*Close button Position sensor Position sensor accuracy(HIGH, LOW) Call sign IMO No. Length Width Draught Destination ETA AIS version no. Ship & Cargo typeVessel nameAssociation condition*: Scroll buttons appear when there are multiple AIS targets.

18. TT AND AIS DISPLAYS18-918.2.8 How to display own ship dataYou can see own ship's data on the [Own Ship] page in the [NAV Status] menu. Open the menu then click both [NAV Status] in the [TT/AIS] menu and the [Own Ship] tab.18.3 AssociationAn AIS-equipped ship is usually displayed by two symbols on the chart for radar dis-play. This is because the AIS ship position is measured by a GPS navigator (L/L) whereas the radar detects the same ship by PPI principle (range and bearing relative to own ship radar antenna).To avoid the presentation of two target symbols for the same physical target, use the “association” function. If target data from both AIS and TT are available and if the as-sociation criteria are fulfilled, either the AIS or TT symbol is presented according to the association method selected.Association will not happen between AIS and TT if the AIS target is sleeping or the AIS target is lost.All association settings, including ON/OFF, can also be controlled from the radar mode, with the [TT/AIS] setting box (see section 4.14). All settings are mutually shared.18.3.1 How to select association methodClick the location circled below to show "<" to select AIS symbol for associated target, or ">" to select TT symbol for associated target. This setting overrides the correspond-ing item on the [TT/AIS] menu. To turn off association, click the location to remove the arrow.MMSI: 457804356Name: FURUNO VoyagerCall Sign: JZ5890312Type: 0Description: All ships of this typeLength(LOA): 223.2 mWidth: 31.8 mRef Bow: 3.3 mRef Port: 2.8 m<<>

18. TT AND AIS DISPLAYS18-10Note: You can also select the method by right-clicking the loca-tion. Click desired association method.18.3.2 How to set the conditions for associationTo set the criteria for association, right-click [AIS] on the [TT/AIS] page in the [NAV Tools/Overlay] box, select [Setting] and open the [Setting.2] page. For setting details, see paragraph 4.14.2.Association: OFFAssociation: TTAssociation: AIS

19-119. RECORDING FUNCTIONSThe chart radar records various voyage-related items like movement and position of own ship and dangerous radar targets (from Radar). These items are recorded in the following logs:19.1 How to Record User, Position Events19.1.1 User eventsA user event is a comment about an event (weather, etc.). You can show user events on the chart area. Open the [Tracking] page of the [Symbol Display] menu show or hide the events.To record a user event:1. Get into the Voyage planning mode then click the [Record], [Event Log] and [User Event] buttons on the In-stantAccess bar to show the [Record User Event] window.2. Enter a comment. Click the [OK] but-ton to finish and close the text box.An event marker ( ) appears at your position and the event is recorded to the [Voy-age] log.To view the comment entered for an event, put the cursor on the event then left click to show the [Event Information] window. The window shows the name of the event ([UserEvent]), time and date of entry, latitude and longitude po-sition of the event and comment. Note that the comment can be edited from this window. Edit the comment then click the [OK] button to save.Event log: Records user events and position events.NAV log: Records entire voyage (i.e., a sailing of a route from first point to the last, also MOB data), details (position, speed and course every minute), chart usage (information on charts used for display).Target log: Records dangerous TT.Alert log: Records alerts generated by the system.Chart log: Records the install and update history for the ENC and C-MAP charts.

19. RECORDING FUNCTIONS19-219.1.2 Position eventsThe operator may manually save positions to the [Event] log by position or LOP (Line of Position):To record a position, get into the Voyage navigation mode or Voyage planning mode then do as follows:1. Click the [Record], [Event Log] and [POSN Event] buttons on the InstantAccess bar to show the [Position Event] dialog box.2. At the list box at the top of the dialog box, select position type.[Manual]: Manual input of ship’s position. Go to step 4.[LOP]: Latitude and longitude position of a fixed object at ship's position. Go to step 5.[Position]: Ship’s position fed from navigator selected. Go to step 3.3. For [Position], click the [Record] button.The position event mark appears at the ship’s position. The position is recorded to the [Voyage] log.Ship’s position fed from navigator selected Selected navigatorNavigator selectedTime of entry1044DGPS1Position event mark

19. RECORDING FUNCTIONS19-34. For [Manual], manually enter position, enter a comment if required, then click the [Record] button.The position event mark appears at the manual input position. The position is re-corded to the [Voyage] log.5. For [LOP], see the description below.Position fixes defined by Line of Position (LOP)A plotted line on which a vessel is located, determined by observation or measure-ment of the range or bearing to an aid to navigation or other charted element. Two or more simultaneous observations can be combined to produce an estimate of the ship's current position. If the position is based on only two observations, it is an "esti-mated position" (EP); otherwise it is called a fix. A maximum of 6 observations can be entered to obtain a fix.Basic operation: Coordinates of the aid to navigation can be entered into dialog box-es or they can be selected graphically on the chart. Click on a charted object (beacon, light, buoy etc.). Description of the object appears above coordinate boxes.Default values for bearing and range are approximated from ship's current position in-formation. The time of observation is stopped when the object is selected (or when the [Add] button is clicked). Click the [Add] box to include the observation in the fix com-putation. The counter shows "new/1", at the input of the second observation. The word "new" indicates that the observation currently displayed is not yet included in the fix computation, and it appears as a dashed line or ring on the chart. The added obser-vations can be edited or deleted after selecting them at the counter. When at least two measurements are entered, the EP or fix is computed and the coordinates are shown in the top part of the dialog.To show a position symbol on the chart, click the [Record] button. In the case of an EP, the letters EP are shown on the right side of the coordi-nates. If a valid position estimate cannot be obtained, a message is displayed under the coordinates. This may happen, for example, if the lines / circles have multiple crossings that are far apart, or if two lines are nearly parallel or don't intersect at all. The accuracy limit (estimated standard error) is 1.0 NM. If the estimate is valid, the [Record] box can be clicked to record the current position estimate in the [Voyage] log. Discrepancy between LOP result and ship position is also recorded in the log (this in-formation may be viewed by Info query on the position event symbol on the chart - which is displayed if position event display is on in chart display settings).Enter position manually. Enter comment here if required.Navigator selectedTime of entry1044DGPS1Position event mark

19. RECORDING FUNCTIONS19-4Time transfer: If the observations are not simultaneous, they should be transferred to a common time. Transferring is based on dead reckoning of ship movement. If a po-sition line (or ring) is transferred, the letters TPL are shown beside its timestamp on the chart. The method of transfer may be selected in the bottom of the dialog. [Trans-fer to latest] transfers the measurements as if they were all made at the time of the newest measurement. [Continuous transfer] transfers all measurements to real time. [Transfer off] can be used to check where the measurement origins are. The position estimate and the record function follow the same logic, which means that Transfer off shows a position that has no relevance and Transfer to latest sends an old position to the [Voyage] log (timestamp in the log does not match the position).If you are satisfied with the position shown in the latitude and longitude fields, then click the [Record] button to save the position observation to the Voyage log. If you wish you can also enter latitude and longitude values manually.Timeouts: The observations cannot be used long after they were made because dead reckoning is inaccurate.Click the [Record] button to put a position event at the LOP-calculated position. The position is recorded to the [Voyage] log.How to find position event informationYou can find information about a position event by putting the cursor on the event mark then left click. The [Event Position] window shows event type (position event), time of entry, event position, name of sensor ([Position] only), comment (automatic for [LOP] and [Position]; user-entered comment* for [Manual]), and position line data ([LOP] only).*Comment cannnot be changed from this window.Time of entry1044EP LOPPosition event markAccuracy of positionEP: Low accuracyDR: High accuracyPosition event: PositionPosition event: Manual Position event: LOP

19. RECORDING FUNCTIONS19-519.2 Details LogThe [Details] log contains voyage information, recorded once per minute.How to view the Details logClick the [Record], [NAV Log] and [Detail] buttons on the InstantAccess bar.• To show the logs of a specific period, enter the period to show with [Period Cov-ered (UTC)] then click the [Set Period] button. Use the [Clear Period] button to dis-play all logs.• To refresh the log, click the [Refresh] button.• To search the log, do as follows:1) Click the [Find] button to show the [Find text] box.2) Click the input box then enter the text to search.3) Select the search direction with the up or down radio button.4) Click the [Find] button. The first matching text is highlighted in yellow at the top of the screen.5) To continue the search click the [Find] button. To cancel the search, click the [Cancel] button.• To print the log, click the [Print Text] button. Select print-ing format then click the [Print] button. [Spread Portrait] prints two pages of data on one page.• To show track for the period selected, click the [Show Track] button. Use the [Hide Track] button to erase the track.• To export the log, click the [Export File] button. The file is namedDetailsLogYYYYMMDDhhmmss.csv.• [Date]• [Time]• [Source]: No. of unit which generated log• [Type]: Type of position data• [Auto]: Automatic input of position• [Latitude], [Longitude]: Position as output by selected sensor• [Align/NM], [Align/°T]: Range, bearing offset, if used• [SOG/kn]: Speed over the ground• [COG/°T]: Course over the ground• [HDG/°T]: Heading• [CORR/°T]: Gyro correction value, if usedExport FileFindInput boxInput text in box and [Find] button appears.

19. RECORDING FUNCTIONS19-619.3 Voyage LogThe [Voyage] log records all voyage-related data of the past three months. Recorded events are:• [Date]: Date of entry• [Time]: TIme of entry• [Source]: No. of unit which generated log• [Type]: Log entry types• [Auto]: Automatic entry of ship position, in 1 to 4 hr intervals, set by operator.• [Ship]: Logged if speed or course exceed operator-set values.• [MOB]: MOB position, entered with [MOB] button.• [User]: Operator-entered position. The information entered in the [Description] box is logged.• [Posdev]: Operator-entered GPS position or LOP. The information entered in the [Description] box is logged.• [Latitude], [Longitude]: Latitude and longitude position• [SOG/kn], [COG/°T], [HDG/°T]: Speed over the ground, course over the ground, heading.• [CORR/°T]: Offset bearing, if used• [Wind/kn], [Wind/°T]: Wind speed and angle• [Dist/NM]: Offset distance• [Depth/m]: Depth in meters• [Description]: The latitude and longitude position and bearing (or distance) of a max-imum of three objects are automatically recorded to each log entry. An object whose position accuracy is low is not recorded. If an object has both a bearing and distance, separate entries are made.If desired the description can be edited. Click the applicable Description block to show the [Edit Description] box. Edit the description as required then click the [OK] button.L/L position, bearing of object (no.1)

19. RECORDING FUNCTIONS19-7How to view the Voyage logTo open the Voyage log, click the [Record], [NAV Log] and [Voyage] buttons on the InstantAccess bar.• To show the logs of a specific period, enter the period to show with [Period Cov-ered (UTC)] then click the [Set Period] button. Use the [Clear Period] button to dis-play all logs.• To refresh the log, click the [Refresh] button.• To search the log, do as follows:1) Click the [Find] button to show the [Find text] box.2) Click the input box then enter the text to search.3) Select the search direction with the up or down radio button.4) Click the [Find] button. The first matching text is highlighted in yellow at the top of the screen.5) To continue the search click the [Find] button. To cancel the search, click the [Cancel] button.• To print the log, click the [Print Text] button. Select print-ing format then click the [Print] button. [Spread Portrait] and [Spread Landscape] print two pages of data on one page.• To show track for the period selected, click the [Show Track] button. Use the [Hide Track] button to erase the track.• To export the log, click the [Export File] button. The file is namedVoyageLogYYYYMMDDhhmmss.csv.Export File

19. RECORDING FUNCTIONS19-819.3.1 How to set conditions of loggingThe operator can set the conditions for automatic voyage logging. When your speed or course equals the amount set here, an entry is made in the [Voyage] log:• Define the amount of course and speed change which creates a log entry.• Set the interval of logging, regardless of speed and course change.To set the conditions of logging, do as follows:1. Open the menu and select the [Voyage] menu from the [NAVI Log] menu.2. Set desired limits for speed, course and log interval. [Speed]: 1 - 10 kn, 1 kn interval[Course]: 0 - 30°, 1° interval[Log Interval]: 1 - 4 hr, 1 hr intervalWhen your speed or course changes by the amount set here, an entry is made in the [Voyage] log, at the interval selected.19.4 Chart Usage LogThe [Chart Usage] log stores which charts were used in chart alerts. To open the log, click [Record], [NAV Log] and [Chart Usage] on the InstantAccess bar. The following information is recorded in the chart usage log:• Date and time chart was displayed• Chart ID• Center position of display (Lat, Lon)• Chart source• Chart edition• Display scale• Compilation scale• The latest update included to chart• Chart base

19. RECORDING FUNCTIONS19-9• To show the logs of a specific period, enter the period to show with [Period Cov-ered (UTC)] then click the [Set Period] button. Use the [Clear Period] button to dis-play all logs.• To refresh the log, click the [Refresh] button.• To search the log, do as follows:1) Click the [Find] button to show the [Find text] box.2) Click the input box then enter the text to search.3) Select the search direction with the up or down radio button.4) Click the [Find] button. The first matching text is highlighted in yellow at the top of the screen.5) To continue the search click the [Find] button. To cancel the search, click the [Cancel] button.• To print the log, click the [Print Text] button.

19. RECORDING FUNCTIONS19-1019.5 Danger Targets LogThe [Danger Targets] log stores information about dangerous targets that are re-ceived from a radar (TTs) and/or targets that are received from an AIS transponder (AIS targets).If a TT or AIS target is within the set CPA (Closest Point of Approach) and TCPA (Time to CPA), information of all TTs (including non-dangerous targets) are recorded into the danger target log. This data is as follows:How to view the danger targets logTo open the [Danger Targets] log, click the [Record], [Target Log] and [Danger Target] buttons on the InstantAccess bar.• To show the logs of a specific period, enter the period to show with [Period Cov-ered (UTC)] then click the [Set Period] button. Use the [Clear Period] button to dis-play all logs.• To refresh the log, click the [Refresh] button.• To search the log, do as follows:1) Click the [Find] button to show the [Find text] box.2) Click the input box then enter the text to search.3) Select the search direction, with the up or down radio button.4) Click the [Find] button. Matching text is highlighted in yellow at the top of the screen.5) To continue the search click the [Find] button. To cancel the search, click the [Cancel] button.• To print the log, click the [Print Text] button.• To export the log, click the [Export File] button. The file is namedDangerTargetLogYYYYMMDDhhmmss.csv.• [Date]: Date of entry• [Time]: Time of entry• [Source]: Unit which generated log• [Type]: Type of dangerous target• [Latitude], [Longitude]: Latitude and longitude position of dangerous target• [SPD/kn]: Speed of dangerous target • [CRS/°T]: Course of dangerous target • [HDG/°T]: Heading of dangerous target • [CPA/NM], [TCPA/min]: CPA and TCPA of dangerous target• [Index]: Radar target no. (TT), MMSI (AIS)2013-05-08 13:55:59 ECD001 TT 35°38.164’N 139°49.842’E 15.1 193.3 N/A 1.3 0.7 2013-05-08 13:53:42 ECD001 TT 35°57.770’N 139°49.732’E 12.1 200.6 N/A 1.1 0.2

19. RECORDING FUNCTIONS19-1119.5.1 How to set the conditions for logging danger targetsThe operator may set Closest Point of Arrival (CPA), Time for CPA (TCPA) and Log interval for viewing dangerous TT and AIS targets on the chart radar display.1. Open the menu and select the [RECORD], [Target Log], [Danger Target] menus.2. Set how often to record dangerous TTs and AIS targets with [Log interval].

19. RECORDING FUNCTIONS19-12This page is intentionally left blank.

20-120. ALERTS20.1 What is an Alert?“Alert" is a generic name for a notice to any unusual or potentially dangerous situation generated within the system.Alerts are classified according to priority and category.Alert priorityThere are three alert priorities: alarm, warning and caution.Alarm: Situations or conditions which require immediate attention, decision and (if necessary) action by the bridge team to avoid any kind of hazardous situation and to maintain the safe navigation of the ship.Warning: Situations or conditions which require immediate attention for precautionary reasons, to make the bridge team aware of conditions which are not immediately haz-ardous, but may become so.Caution: Awareness of a condition which continues to require attention out of the or-dinary consideration of the situation or of given information.Alert categoryAn alert is further classified by category, A, B or C, according to its degree of severity or source.Category DescriptionA Category A alerts include alerts indicating• Danger of collision• Danger of groundingB Category B alerts are alerts where no additional information for decision support is necessary. Category B alerts are all alerts not falling under category A.C IAS (Integrated Automation System) generated engine alert

20. ALERTS20-220.2 Alert BoxWhen an alert is generated, the related alert message and alert state icon appear in the [Alert] box, which is at the bottom right corner on the screen. An audible alarm is additionally generated for alarms and warnings.In addition to the alert message and alert state icon, the [Alert] box has the buzzer stop button and provides access to the [Alert List] and [Alert Log].Alert state icon: The state of an alert is shown with an icon. See page 20-4.Alert message: The number and name of all active alerts appear in the message ar-ea, with the alert of the highest priority on top always. The color of both the message and the background change according to alert priority and alert state. See the table on the next page.An alert can be acknowledged from the [Alert] box or [Alert List]. An alert remains in the [Alert] box and [Alert List] until it is acknowledged and rectified. See section 20.5.Alert List/Alert Log button: Right-click to select [Alert List Window] or [Alert Log Win-dow]. The background color of the button is light blue when the list or log is open. See sections 20.5 and 20.6 for a description of the list and log.Buzzer stop button: Click to temporarily silence the buzzer, which sounds against alarms and warnings. See page 20-4.Alert message(Number and name of alert)Alert List/Alert Log button(Right-click to select [Alert List Window] or [Alert Log Window].)Buzzer stop button (Click to stop buzzer temporarily.)Alert state icon

20. ALERTS20-3Alert message display formatAlert indication Priority of alert Alert state Display stateAlarm - Not acknowledged/Not rectified.OR- Not acknowledged/Rec-tified.Black characters on red background.Flashing interval• 0.5 s, 0.5 s (Not rectified)• 3 s, 1 s (Rectified)Red characters on gray background.Alarm Acknowledged/Not recti-fied.Red characters on gray background.Warning - Not acknowledged/Not rectified.ORNot acknowledged/Recti-fied.Black characters on yellow-orange background.Flashing interval• 0.5 s, 0.5 s (Not rectified)• 3 s, 1 s (Rectified)Yellow-orange characters on gray background.Warning Acknowledged/Not recti-fied.Yellow-orange characters on gray background.Caution Not rectified. Yellow characters on gray background.Alarm/WarningAcknowledged/Rectified. No display.Caution Rectified. No display.526526Displayed alternatelyTT CPA/TCPATT CPA/TCPA526TT CPA/TCPA008008Fan 2 No Rotati..Displayed alternatelyFan2 No Rotati..008Fan2 No Rotati..362Wind Sensor 3..

20. ALERTS20-4Alert state iconsThe table shows the icons used to indicate the various alert states for the alarm, warn-ing and caution alerts.Buzzer stop buttonThe color of both the background and the icon change according to alert state.Icon Alert state Icon descriptionAlert priority: AlarmNot acknowledged/Not rectified Red triangle with black loudspeak-er in center of triangle. Flashing every 0.5 s.Not acknowledged/Not rectified,Buzzer temporarily silencedRed triangle with crossed out black loudspeaker in center of tri-angle. Flashing every 0.5 s.Acknowledged/Not rectified Red triangle with black exclama-tion point in center of triangle.Not acknowledged/Rectified Red triangle with black check mark in center of triangle. The icon flashes 3 s, goes off 1 s, repeats the sequence.Alert priority: WarningNot acknowledged/Not rectified Yellow-orange circle with black loudspeaker in center of circle. Flashing every 0.5 s.Not acknowledged/Not rectified,Buzzer temporarily silencedYellow-orange circle with crossed out black loudspeaker in center of circle. Flashing every 0.5 s.Acknowledged/Not rectified Yellow-orange circle with black exclamation point in center of cir-cle.Not acknowledged/Rectified Yellow-orange circle with black check mark in center of circle. The icon flashes 3 s, goes off1 s, repeats the sequence.Alert priority: CautionCaution Steadily displayed yellow square with black exclamation point in center of square.Button state DescriptionNo alert generated. The background is gray and the icon is grayed out.An alarm or warning is being acknowledged. The background is gray and the icon is white.Button clicked to silence buzzer temporarily. The background is light-blue and the icon is black.

20. ALERTS20-520.3 How to Temporarily Silence the Buzzer for an Alarm or WarningWhen the buzzer for an alarm or warning sounds, you can temporarily silence it by do-ing one of the following:• Click the buzzer stop button in the [Alert] box.• In the [Alert List], click the [Silence] button.The buzzer is stopped and the alert state changes. An alert message remains in the [Alert] box and [Alert List] until acknowledged and rectified. If an alarm or warning is not acknowledged within 30 seconds, the buzzer sounds again.20.4 How to Acknowledge an Alarm or WarningWhen an alarm or warning is generated, the buzzer sounds and the name of the alert appears and flashes in the [Alert] box and [Alert List].To acknowledge the alert, do one of the following:• Press the ALARM ACK key.• In the [Alert] box or [Alert List], click the unacknowledged alert.After acknowledgement, the buzzer and the flashing for the alert message are stopped and the priority of the alert changes as shown in the table below. The alert message remains on the display until rectified.Unacknowledged warningsIf a warning (Alert 150 "Early Course Change Indication" and 151 "Actual Course Change Indication") is not acknowledged within 30 seconds then the priority changes to alarm. If a warning (except for Alert 150 and 151) is not acknowledged within 60 seconds, the warning is generated again.Category of alert and place of alert acknowledgementThe place of alert acknowledgement depends on the category of the alert.Priority no. Priority of alert Alert stateHighLow1 Alarm Not acknowledged/Not rectified2 Warning Not acknowledged/Not rectified3 Alarm Not acknowledged/Rectified4 Warning Not acknowledged/Rectified5 Alarm Acknowledged/Not rectified6 Warning Acknowledged/Not rectified7 Caution Not rectifiedCategory Where the alert is generated Place of alert acknowledgementA Equipment that generated the alert.Equipment that generated the alert.B Equipment that generated the alert.Equipment that generated the alert or AMS.C IAS (Integrated Automation Sys-tem) generated engine alert–

20. ALERTS20-620.5 Alert ListThe [Alert List] displays all active alerts, with unacknowledged alerts at the top, in pri-ority order. To display the list, right-click the [Alert List/Alert Log] button in the [Alert] box then select [Alert List/Log Window]. The ZDA sentence is required to display the time in the list.Note: The [Alert List] cannot be opened while the radar is transmitting.The list showsThe background color of an unacknowledged alarm is red and flashing and unac-knowledged warning is yellow-orange and flashing. An acknowledged alert is dis-played steadily, in red for alarm and yellow-orange for warning. A caution is displayed steadily in yellow.The [Filter] checkboxes at the top of the window let you select what alerts to view. Check or uncheck the boxes to show or hide the corresponding alerts.To find details about an alert, click the applicable alert info icon at the left side of the window to show the details in the [Detail] box at the top of the window. The box shows the reason for the alert, how to handle the alert, etc.An individual alarm or warning can be acknowledged by clicking it.The [Silence] button silences the buzzer.• Alert no.• Alert text• Source of alert• Time (UTC) alert was generated• Time (UTC) alert was acknowledged• Details about the alert selectedFilterTime ACKedAlert detailsSilence buzzerTime generatedAlert textAlert no.Alert info iconSource

20. ALERTS20-7How the alert list is updated after acknowledgement, rectificationWhen you acknowledge an alert, its display method on the [Alert] list changes accord-ing to alert category and alert state. Acknowledged and rectified alerts are immediately removed from the list.20.6 Alert LogThe [Alert] log stores and displays the latest 10,000 alerts. To display the log, right-click the [Alert List/Alert Log] button then select [Alert List/Log Window].Note: The [Alert Log] cannot be opened while the radar is transmitting.The log shows the following information for each alert:No. Alert priority Alert state Display after acknowledgementDisplay afterrectification1 Alarm Not acknowledged/Not rectified 5 22 Not acknowledged/Rectified 8 –3 Warning Not acknowledged/Not rectified 6 44 Not acknowledged/Rectified 9 –5 Alarm Acknowledged/Not rectified – 86 Warning Acknowledged/Not rectified – 97 Caution Not rectified – 108 Alarm Acknowledged/Rectified – –9 Warning Acknowledged/Rectified – –10 Caution Rectified – –• Priority of alert (Alarm, Warning, Caution)• Category of alert (A, B or C) • Alert no.• Alert description• Source of alert• Occurred Time (UTC)• ACKed Time (UTC)• Rectified Time (UTC)• Alert detailsAlarm DetailsPriority filterCategory filterOccured timeSourceAlert no.Alert textCategoryPriority

20. ALERTS20-8You can select what type of alerts to display with [Priority Filter] and [Category Filter] at the top of the list. The list can be sorted by [Priority], [Cat.], [Alert No.], [Description], [Occurred Time], [ACKed TIime] or [Rectified Time]. Click the corresponding column title to sort. To find detailed information about an alert, select it to show detailed infor-mation in the [Detail] box. To search the log, enter text in the [Log Search] box then click the [Find] button. You can save the contents of the log to a USB flash memory, in .dat format, by clicking the [Export Log] button.20.7 Alert Reception from Connected SensorsAn "ALR receive and ACK transmit" communication is available for every serial line input. The ALR message from the sensor includes information about alerts from the sensor, and is presented though the normal alert system. When you acknowledge an alert, an ACK message is sent to the sensor to do remote acknowledge.This interface is based on IEC 61162-1 and IEC 80/520/INF.20.8 List of AlertsBelow is a list of all available alerts and their default priorities. The priority of Alerts 620 to 638 can be switched between Caution and Warning on the [Chart Alert] page (see paragraph 11.1.2).No. Text Defaultpriority001 Fan1 Rotation Speed Lowering Caution002 Fan2 Rotation Speed Lowering Caution003 Fan3 Rotation Speed Lowering Caution004 Fan4 Rotation Speed Lowering Caution005 LCD Unit Lifetime Over Warning006 High Temperature Inside Monitor Warning007 Fan1 No Rotation Warning008 Fan2 No Rotation Warning009 Fan3 No Rotation Warning010 Fan4 No Rotation Warning011 RS485 Communication Timeout Caution012 No Signal Caution013 Sentence Syntax Error Caution014 Fan1 Rotation Speed Lowering Caution015 Fan2 Rotation Speed Lowering Caution016 Fan3 Rotation Speed Lowering Caution017 Fan4 Rotation Speed Lowering Caution018 LCD Unit Lifetime Over Warning019 High Temperature Inside Monitor Warning020 Fan1 No Rotation Warning021 Fan2 No Rotation Warning022 Fan3 No Rotation Warning023 Fan4 No Rotation Warning024 RS485 Communication Timeout Caution025 No Signal Caution Caution

20. ALERTS20-9026 Sentence Syntax Error Caution027 Main Monitor COM Timeout Caution028 Sub Monitor COM Timeout Caution030 Sensor Adapter 1 COM Timeout Caution031 Sensor Adapter 2 COM Timeout Caution032 Sensor Adapter 3 COM Timeout Caution033 Sensor Adapter 4 COM Timeout Caution034 Sensor Adapter 5 COM Timeout Caution035 Sensor Adapter 6 COM Timeout Caution036 Sensor Adapter 7 COM Timeout Caution037 Sensor Adapter 8 COM Timeout Caution038 Sensor Adapter 9 COM Timeout Caution039 Sensor Adapter 10 COM Timeout Caution070 RCU 1 COM Timeout Caution071 RCU 2 COM Timeout Caution072 RCU 3 COM Timeout Caution073 EC-3000 CPU Temp High Caution074 EC-3000 GPU Temp High Caution075 EC-3000 CPU Board Temp High Caution076 EC-3000 Remote 1 Temp High Caution077 EC-3000 Remote 2 Temp High Caution078 EC-3000 CPU Fan Rotation Speed Lowering Caution079 EC-3000 Fan1 Rotation Speed Lowering Caution080 EC-3000 Fan2 Rotation Speed Lowering Caution082 EC-3000 CPU Fan No Rotation Warning083 EC-3000 Fan1 Fan No Rotation Warning084 EC-3000 Fan2 Fan No Rotation Warning086 EC-3000 CPUboard 5V Power Error Warning087 EC-3000 CPUboard 3.3V Power Error Warning088 EC-3000 CPUboard 12V Power Error Warning089 EC-3000 CPUboard Battery Power Error Caution090 EC-3000 CPUboard Core Power Error Caution094 Sensor Adapter 11 COM Timeout Caution095 Sensor Adapter 12 COM Timeout Caution096 Sensor Adapter 13 COM Timeout Caution097 Sensor Adapter 14 COM Timeout Caution098 Sensor Adapter 15 COM Timeout Caution099 Sensor Adapter 16 COM Timeout Caution150 Early Course Change Indication Warning151 Actual Course Change Indication Warning170 Positioning System Failure Warning171 Crossing Safety Contour Alarm172 Off Track Alarm Alarm175 Different Geodetic Datum Warning176 System Malfunction Warning235 Echo Sounder 1 COM Error Caution236 Echo Sounder 2 COM Error Caution237 Echo Sounder 3 COM Error CautionNo. Text Defaultpriority

20. ALERTS20-10255 Gyro 1 COM Error Caution256 Gyro 2 COM Error Caution257 Gyro 3 COM Error Caution258 Gyro 4 COM Error Caution259 Gyro 5 COM Error Caution260 Backup Navigator Alarm272 UTC Time Not Available Warning273 Depth(Bow) Not Available Caution274 Depth(Midship) Not Available Caution275 Depth(Stern) Not Available Caution277 Wind Speed/Direction Not Available Warning278 STW Not Available Caution279 COG/SOG Not Available Warning280 SDME 1 COM Error Caution281 SDME 2 COM Error Caution282 SDME 3 COM Error Caution284 SOG Not Available Warning290 EPFS 1 COM Error Caution291 EPFS 2 COM Error Caution292 EPFS 3 COM Error Caution293 EPFS 4 COM Error Caution294 EPFS 5 COM Error Caution295 EPFS 6 COM Error Caution296 EPFS 7 COM Error Caution297 EPFS 8 COM Error Caution298 EPFS 9 COM Error Caution310 Other Sensor 1 COM Error Caution311 Other Sensor 2 COM Error Caution312 Other Sensor 3 COM Error Caution313 Other Sensor 4 COM Error Caution314 Other Sensor 5 COM Error Caution315 Other Sensor 6 COM Error Caution316 Other Sensor 7 COM Error Caution317 Other Sensor 8 COM Error Caution318 Other Sensor 9 COM Error Caution319 Other Sensor 10 COM Error Caution320 EC-3000 Ch.01 COM Timeout Caution321 EC-3000 Ch.02 COM Timeout Caution322 EC-3000 Ch.03 COM Timeout Caution323 EC-3000 Ch.04 COM Timeout Caution324 EC-3000 Ch.05 COM Timeout Caution325 EC-3000 Ch.06 COM Timeout Caution326 EC-3000 Ch.07 COM Timeout Caution327 EC-3000 Ch.08 COM Timeout Caution360 Wind Sensor 1 COM Error Caution361 Wind Sensor 2 COM Error Caution362 Wind Sensor 3 COM Error Caution370 Water Current COM Error CautionNo. Text Defaultpriority

20. ALERTS20-11371 Water Temp COM Error Caution380 AIS COM Error Warning390 NAVTEX COM Error Caution400 Network Printer Not Available Caution401 Local Printer Not Available Caution411 Other Sensor 11 COM Error Caution412 Other Sensor 12 COM Error Caution413 Other Sensor 13 COM Error Caution414 Other Sensor 14 COM Error Caution415 Other Sensor 15 COM Error Caution416 Other Sensor 16 COM Error Caution417 Other Sensor 17 COM Error Caution418 Other Sensor 18 COM Error Caution419 Other Sensor 19 COM Error Caution420 Other Sensor 20 COM Error Caution421 Other Sensor 21 COM Error Caution422 Other Sensor 22 COM Error Caution423 Other Sensor 23 COM Error Caution424 Other Sensor 24 COM Error Caution425 Other Sensor 25 COM Error Caution426 Other Sensor 26 COM Error Caution427 Other Sensor 27 COM Error Caution428 Other Sensor 28 COM Error Caution429 Other Sensor 29 COM Error Caution430 Other Sensor 30 COM Error Caution450 Heading Sensor Not Available Warning451 Gyro CORR. Source Change Caution453 SDME Sensor Not Available Warning469 WGS84 Not Used Warning470 Datum Change Caution472 Position Source Change Warning473 Heading Source Change Warning474 COG/SOG Source Change Warning475 CTW/STW Source Change Warning485 Depth Limit Alarm495 Anchor Watch Error Warning500 Watch Alert Warning520 TT System Error Warning521 TT New Target Warning522 TT Auto ACQ 95% Caution523 TT Auto ACQ 100% Warning524 TT MAN ACQ 95% Caution525 TT MAN ACQ 100% Warning526 TT CPA/TCPA Alarm527 TT Lost Warning528 REF Target Lost Warning529 AIS New Target Warning530 AIS Target Display 95% CautionNo. Text Defaultpriority

20. ALERTS20-12531 AIS Target Display 100% Warning532 AIS Target Capacity 95% Caution533 AIS Target Capacity 100% Warning534 AIS Target Activate 95% Caution535 AIS Target Activate 100% Warning536 AIS CPA/TCPA Alarm537 AIS Lost Warning539 AIS Message Received Caution541 AIS Message Transmit Error Caution542 AIS Transmitting Caution543 No CPA/TCPA for AIS Warning550 Active AIS-SART/MOB/EPIRB Warning560 Association Caution620 User Chart Danger Area Warning621 Traffic Separation Zone Warning622 Inshore Traffic Zone Warning623 Restricted Area Warning624 Caution Area Warning625 Offshore Production Area Warning626 Military Practice Area Warning627 Seaplane Landing Area Warning628 Submarine Transit Lane Warning629 Anchorage Area Warning630 Marine Farm / Aquaculture Warning631 PSSA Area Warning632 Areas to be Avoided Warning633 Buoy Warning634 UKC Limit Warning635 Non-official ENC Warning636 No Vector Chart Warning637 Not Up-to-date Warning638 Permit Expired Warning640 Chartalign: Over 30 min Caution689 Drift Comp Error Warning690 TC Start Timeout Alarm691 RM Stop - Exceed Max XTE Alarm692 RM Stop - No Valid Sensor Data Alarm693 RM Stop - Other Causes Alarm720 No ANT Heading Signal Warning721 No ANT Azimuth Signal Warning722 No ANT Trigger Signal Warning723 No ANT Video Signal Warning724 No RPU Gyro Signal Warning725 No ANT Echo Signal Warning726 RF Unit COM Error Warning727 Radar Sensor COM Error Warning728 Radar Sensor SW Version Error Warning730 EXT Radar STBY CautionNo. Text Defaultpriority

20. ALERTS20-13740 EXT Radar No Signal Warning750 EXT Radar COM Error Warning760 Datum Mismatch Warning770 SPU Error Warning771 MTR-DRV Error Warning772 PM Error Warning773 RF-Converter Error Warning774 PSU-Control Error Warning820 NAVTEX Message Received Caution851 EPFS 1 Sensor Banned Caution852 EPFS 2 Sensor Banned Caution853 EPFS 3 Sensor Banned Caution854 EPFS 4 Sensor Banned Caution855 EPFS 5 Sensor Banned Caution856 EPFS 6 Sensor Banned Caution857 EPFS 7 Sensor Banned Caution858 EPFS 8 Sensor Banned Caution859 EPFS 9 Sensor Banned Caution860 EPFS 10 Sensor Banned Caution861 SDME 1 Sensor Banned Caution862 SDME 2 Sensor Banned Caution863 SDME 3 Sensor Banned Caution871 Gyro 1 Sensor Banned Caution872 Gyro 2 Sensor Banned Caution873 Gyro 3 Sensor Banned Caution874 Gyro 4 Sensor Banned Caution875 Gyro 5 Sensor Banned Caution881 ROT Gyro 1 Sensor Banned Caution882 ROT Gyro 2 Sensor Banned Caution883 ROT Gyro 3 Sensor Banned Caution891 Water Current Sensor Banned Caution900 No Filter Source of Position Warning901 No Filter Source of COG/SOG Warning902 No Filter Source of CTW/STW Warning903 No Filter Source of Heading Warning904 No Filter Source of ROT Warning950 HBT Timeout CautionNo. Text Defaultpriority

20. ALERTS20-14This page is intentionally left blank.

21-121. PARAMETERS21.1 Ship and Route ParametersThe purpose of the ship and route parameters is set the basic parameters for the ship. These parameters are relative to ship steering and they are very important to get cor-rect function of the integrated navigation system. They must be maintained carefully. Modification requires a good knowledge of the parameters' importance.Open the menu and select [Ship & Route Parameters] from the [General] menu to show the [Ship & Route] page. Set each item referring to the description below.Ship parameters description[MAX Speed]: Maximum speed the ship can do.[MAX Height]: Max. height of ship above sea level.[MAX Draught]: Max. draught of ship.Route parameters description[MAX R.O.T]*: The maximum rate of turn of the ship. Set at installation.[WPT Approach]*: The alert time before reaching the wheel over point.[WPT Prewarning]*: The alert time before reaching the wheel over point.[Default Line Radius]: Define the default value of radius between waypoints during au-tomatic route steering.[Default CH Limit]: Define the default value of channel limit.[Default Safety Margin]: Define the default value of extension for channel limits to be checked against selected alerts.* Set at installation and cannot be changed by the operator.

21. PARAMETERS21-221.2 Instant Track ParametersThe instant track feature can create, in route monitoring, a simple route in the following situations:• Return to the monitored route when the vessel goes outside the channel limits.• Temporarily deviate from the monitored route (avoid collision, etc.).How to set instant track parametersSet the parameters for the instant track ([MENU] → [General] → [Ship & Route Pa-rameters] → [Instant Track] tab).[Delay before Initiating First Turn]: Set the number of seconds (30 - 600 seconds) to wait before initiating the first turn in the simple route.[Turn Radius]: Set the turning radius (0.02 - 3.00 NM) to use between waypoints (four waypoints) in the simple route.[Channel Limit for Track Control]: Set the channel limit (10 - 1852 m) for the instant track, automatically or manually. The [Auto] setting uses the channel limit set for the monitored route.

21. PARAMETERS21-321.3 Cost ParametersThe cost parameters are used in the optimization calculation. Therefore define these parameters before doing the calculation.Open the menu and select [Cost Parameters] from the [General] menu to show the [Cost Parameters] page. Set each item according to ship’s plan, etc.At the [Cost] window, enter the cost/hour and cost/ton for heavy fuel oil and diesel oil. At the [Fuel Consumption] window, define the fuel consumption figures for up to 12 different speeds. Before entering the data, plot the data on a graph, like the one shown below. Use a second graph if, for example, diesel oil consumption is different from that of heavy fuel oil. Reset the power to effect the settings.765432100 1 2 4 6 8 10 12 14 16 20FUEL CONSUMPTIONSHIP’S SPEED (kn)TON/h

21. PARAMETERS21-4This page is intentionally left blank.

22-122. SETTINGS MENUThe [Settings] menu provides file import, export and maintenance, testing facilities (display, keyboard, self test), customizing, screenshot processing, and CCRP selec-tion.22.1 How to Access the Settings MenuNo. Name Description1([Settings] menu access button)Click the button then select [Settings] to open the [Settings] menu. The message shown below appears. Click the [OK] but-ton to open the [Settings] menu.2 [Settings] menu display areaThe [Settings] menus appear here.3 Page selection buttonsTo open a page, use the page selection buttons to select a page then click the tab of the page required. The color of the border of the page selected is light blue.213Radar Installation

22. SETTINGS MENU22-322.3 File ImportThe [File Import] page lets you import setting data, routes, user charts, radar maps and radar installation from an external media (USB flash memory, etc.).Note 1: The system automatically restarts if setting data is imported.Note 2: If importing could not be completed, first check if the USB flash memory is properly inserted. If inserted properly, try importing again.Note 3: Items 2 and 3 do not appear until a file is selected.Note 4: The message "Now processing" appears during the importing. The message "File import finished." appears upon completion of the importing. Click the [OK] button.No. Name Description1 [Select file to import] buttonClick to show the [OPEN FILE] dialog box, where you can select the file to import.2[Select data to import]Check the data to import, among [Setting data], [Route/User chart] and [Radar map].Note 1: Execute [User Default] (see section 22.11) before im-porting [Setting data].Note 2: [Radar Installation] is available only with the service mode.3 [Import] button Click to import the objects selected. The following message ap-pears on the display.123Radar Installation

22. SETTINGS MENU22-422.4 File MaintenanceThe [File Maintenance] page lets you restore the last-saved route/user chart applica-tion and route/user chart system.Note: To back up route data, first check for the chart radar with the most recent route list then do the restore from that chart radar.No. Name Description1 [Route/Userchart Application Back-up]Click to restore last-saved route/userchart application.2 [Route/Userchart System Backup]Click to restore last-saved route/userchart system.3 [Restore] button Click to restore item selected.123

22. SETTINGS MENU22-522.5 Self TestThe [Self Test] page is mainly for use by the service technician to check the equip-ment. The chart radar is inoperative during the test.No. Name Description1 Test results, pro-gram numbersThe results of the self test and the program numbers. (xx=version number)2 [Start] button Start the self test.3 [Stop] button Stop the self test. (Shown during test.)[EC-3000]RADAR Software Version: 0359266-02.xx[Radar Sensor]SPU Software Version: 0359281-01.xx[key1]Software Version: 2450086-01.xx[Dongle Information]Function: ecdis,radarENC User Permit: ERRORARCS User Permit: ERRORARCS PIN: ERROR123

22. SETTINGS MENU22-622.6 Data SharingThe [Data Sharing] page selects the items to share between the radar and the chart radar.No. Name Description1 [NAV Tools] Check the NAV tools items to share them between the chart and the radar.2 [Display Settings] Check the display setting items to share between the chart and the radar.NAV ToolsVRMEBLPI LineDisplay SettingsColor PaletteDisplay Brilliance12

22. SETTINGS MENU22-722.7 CustomizeThe [Customize] page lets you set buzzer volume, key beep volume, and scrollwheel rotation direction.No. Name Description1 [Wheel rotation] Set the direction of scrollwheel rotation direction.[Normal]: Downward to increase value, upward to decrease value.[Reverse]: Reverse of [Normal].2 [Key beep volume] Set the loudness of the key beep that sounds for correct key or mouse button operation.0: No beep, 1: LOW, 2: MID, 3: HIGH3 [Alert sound vol-ume]Set the loudness of the alert buzzer.1: LOW, 2: MID, 3: HIGH123

22. SETTINGS MENU22-822.8 Display TestThe [DIsplay Test] page displays various test patterns to check the FURUNO-supplied monitor for proper display of colors. Click the [Display Test] button to start the test. The buzzer sounds when the display test starts.Left-click to proceed in the numerical order shown below; right-click to proceed in re-verse order.To quit the display test at any time, press the ESC key on the applicable Control Unit.(1) (2) (3) (4)(5) (6) (7) (8)(9) (10) (11) (12)(13) (14) (15) (16)Diagonal Gray and black All colors BlackWhite Red Green BlueGray Red bars Green bars Blue barsYellow bars Aqua bars Purple bars Gray bars

22. SETTINGS MENU22-922.9 Keyboard TestThe [Keyboard Test] page checks the controls and keys on the Radar Control Unit and the ECDIS Control Unit and the trackball module on the Radar Control Unit, ECDIS Control Unit and Trackball Control Unit.No. Name Description1 Common controls Operate the corresponding controls on the Ra-dar Control Unit and chart radar Control Unit. Rotate a control and the window above the control shows the setting value. Push a control and the corresponding location on screen lights in light blue. (The EBL and VRM controls do not have a push function.)2 InstantAccess knob/key Check the InstantAccess knob and key.1) Rotate the knob and the setting value ap-pears in the window.2) Push the knob and the knob lights in light blue.3) Push the key and the key lights in blue.3 Keys of the Radar Control UnitOperate each key. The key pressed lights in light blue.4 Keyboard of the chart radar Control UnitOperate each key. The key pressed lights in light blue. 152345876

22. SETTINGS MENU22-105 Keys of both the Radar Con-trol Unit and chart radar Control UnitOperate each key. The pressed key lights in light blue.6 Trackball module Check the trackball module of a Control Unit:1) Spin the scrollwheel and rotate the track-ball. The indication above the operated control shows the setting value.2) Push each button. The window above a pushed button lights in light blue.3) Push the scrollwheel. The window above the wheel lights in light blue.7 [Buzzer ON] button Click the [Buzzer ON] button to sound the buzzer. The buzzer sounds and the button flashes (in red). Click the button again to can-cel.8 [Contact Output] button Click the [Contact Output] button to output the System Failure contact signal from the Pro-cessor Unit. Click the button again to cancel.No. Name Description

Navigation menu