Futaba PK-FSM-24G Radio Control User Manual Your FRH set should contain the following

Futaba Corporation Radio Control Your FRH set should contain the following

Users Manual

PK-FSM-2.4G/R603FS Radio Control Instruction Manual INTRODUCTION Thank you for purchasing a FutabaR digital proportional R/C system. In order for you to make the best use of your system and to use it safely, please read this manual carefully. If you have any difficulties while using your system, please consult the manual, our online Frequently Asked Questions (on the web pages referenced below), your hobby dealer, or the Futaba Service Center. Owner’s Manual and Additional Technical Help This manual has been carefully written to be as helpful to you, the new owner, as possible. There are many pages of setup procedures and examples. However, it need not be your sole resource of setup guidelines. For example, the back cover includes a quick-start set of instructions and the Frequently Asked Questions web page referenced below includes this type of step-by-step setup instructions for a variety of other model types. Due to potential unforeseen changes in production procedures, the information contained in this manual is subject to change without notice. No part of this manual may be reproduced in any form, at any time, without prior permission. Support and Service: It is recommended to have your Futaba equipment serviced annually during your hobby’s “off season” to ensure safe operation. IN NORTH AMERICA Please feel free to contact the Futaba Service Center for assistance in operation, use and programming. Please be sure to regularly visit the Frequently Asked Questions web site referenced below. This page includes extensive programming, use, set up and safety information on your radio system and is updated regularly. Any technical updates and US manual corrections will be available on this web page. If you do not find the answers to your questions there, please see the end of our F.A.Q. area for information on contacting us via email for the most rapid and convenient response. 1
Don’t have Internet access? Internet access is available at no charge at most public libraries, schools, and other public resources. We find internet support to be a fabulous reference for many modelers as items can be printed and saved for future reference, and can be accessed at any hour of the day, night, weekend or holiday. If you do not wish to access the internet for information, however, don’t worry. Our support teams are available Monday through Friday 8-5 Central time to assist you. HOW TO SEND FOR SERVICE: www.hobbyservices.com\techsupport\service-form-futaba.pdf www.hobbyservices.com\techsupport\service-form-futaba.html OUTSIDE NORTH AMERICA Please contact your Futaba importer in your region of the world to assist you with any questions, problems or service needs. Please recognize that all information in this manual, and all support availability, is based upon the systems sold in North America only. Products purchased elsewhere may vary. Always contact your region’s support center for assistance. The product is subject to regulations of the FCC and is restricted under United States law to such purposes. 1. Exportation precautions: (a) When this product is exported from the country of manufacture, its use is to be approved by the laws governing the country of destination which govern devices that emit radio frequencies. If this product is then re-exported to other countries, it may be subject to restrictions on such export. Prior approval of the appropriate government authorities may be required. If you have purchased this product from an exporter outside your own country and not the authorized Futaba distributor in your country, please contact the seller immediately to determine if such export regulations have been met. 2. Modification, adjustment, and replacement of parts: Futaba is not responsible for unauthorized modification, adjustment, and replacement of parts on this product. Any such changes may void the warranty. The Following Statement Applies to the Receiver (for U.S.A.) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesirable operation. 2
Physical Description Please review the following section and take a moment to familiarize yourself with the PK-FSM-2.4G/R603FS . IPK-FSM-2.4G (Transmitter) PIN ASSIGNMENT #1 #5 Fig.1 Serial Communication Connector Location Table 1 Pin Description Pin Abbreviation I/O Function 1 PPM MOD in Pulse position data VLI 0V VHI 3V 2 Vcc in Vcc:9.6V 3 MET out Transmission indicator 4 GND − signal ground 5 NC − NC Pulse position data Data frame Data frame 1ch 2ch 3ch/RESET 1ch 2ch 3ch/RESET Table 2 Pulse position data Item minimum center maximum Remarks 【1ch】 800us 1100us 1400us 1100±300us 【2ch】 800us 1100us 1400us 1100±300us 【3ch/RESET】 1500us 1800us 2100us 1800±300us Set Frequency Pattern in rotary SW(0 or 8) SW 0 : 2405.376 - 2479.104 MHz 36CH SW 8 : 2405.376 - 2450.432 MHz 22CH PK-FSM-2.4G fires an electric wave at the frequency that I set in rotary SW by power supply re-injection. 3
R603FS(Receiver) Set frequency SW １ｓｅｃ ＰＵＳＨ （ＡＵＴO ＳＥＴＴＩＮＧ） Fig.2 4
Frequency Allocation The PK-FSM-2.4G/R603FS can operate on 36(or22) available frequencies between 2405.376 MHz and 2479.104 MHz with 2.048 MHz separation between each frequency. See the table below for the exact frequency assignments. Table 3 ：Frequency Channel Channel № Frequency (MHz) Channel № Frequency (MHz) 0２ ２４０５．３７６ ３８ ２４４２．２４０ 0４ ２４０７．４２４ ４０ ２４４４．２８８ 0６ ２４０９．４７２ ４２ ２４４６．３３６ 0８ ２４１１．５２０ ４４ ２４４８．３８４ １０ ２４１３．５６８ ４６ ２４５０．４３２ １２ ２４１５．６１６ ４８ ２４５２．４８０ １４ ２４１７．６６４ ５０ ２４５４．５２８ １６ ２４１９．７１２ ５２ ２４５６．５７６ １８ ２４２１．７６０ ５４ ２４５８．６２４ ２０ ２４２３．８０８ ５６ ２４６０．６７２ ２２ ２４２５．８５６ ５８ ２４６２．７２０ ２４ ２４２７．９０４ ６０ ２４６４．７６８ ２６ ２４２９．９５２ ６２ ２４６６．８１６ ２８ ２４３２．０００ ６４ ２４６８．８６４ ３０ ２４３４．０４８ ６６ ２４７０．９１２ ３２ ２４３６．０９６ ６８ ２４７２．９６０ ３４ ２４３８．１４４ ７０ ２４７５．００８ ３６ ２４４０．１９２ ７２ ２４７７．０５６ ７４ ２４７９．１０４ 5
Specification PK-FSM-2.4G SPECIFICATIONS 1 Radio Characteristics Engineering standard Part 15.247 FCC(U.S.) RF power output 100mW EIRP Modulation Direct-Sequence Spread-Spectrum Communication scheme Single communication Frequency band 2405.352MHz - 2479.104MHz Channel 36/22 Data barer rate 136 kbps 6 dB bandwidth 1.6MHz Frequency control Crystal controlled frequency synthesizer Antenna 1/2λ Pencil type antenna 1.6dBi Operating Distance 150m 2 Radio communication control Error checking CRC-CCITT 3 Terminal interface Physical interface 5 pins 4 Power Supplying Supply voltage 9.6V DC Current consumption 110 mA 5 Environmental Operating temperature -10 to +60 ℃ Storage temperature -20 to +70 ℃ 6 Miscellaneous Indicator 2 color LED Frequency setting Rotary SW Memory register Rewritable times: approx. 1 million times Case Plastic Outer dimensions 38 (W)×60(D)×21(H)mm Weight Aprox. 35g R603FS SPECIFICATIONS 1 Radio Characteristics Engineering standard Part 15.247 FCC(U.S.) Frequency band 2405.352MHz - 2479.104MHz Channel 36/22 Data barer rate 136 kbps Frequency control Crystal controlled frequency synthesizer Antenna 1/2λ SMD type antenna -5dBi Operating Distance 150m 2 Radio communication control Error checking CRC-CCITT 3 Terminal interface Physical interface 15 pins 4 Power Supplying Supply voltage 6V DC Current consumption 80 mA 5 Environmental Operating temperature -10 to +60 ℃ Storage temperature -20 to +70 ℃ 6 Miscellaneous Indicator 2 color LED Memory register Rewritable times: approx. 1 million times Case Plastic Outer dimensions 26(W)×40(D)×14.5(H)mm Weight Aprox. 14g 6

Navigation menu