Futaba PK-FSM-24G Radio Control User Manual Your FRH set should contain the following

Download:
Mirror Download [FCC.gov]
Document ID	662344
Application ID	0rYvSu8UdJ09sb1bnw/jRA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.82kB (97739 bits)
Date Submitted	2006-05-26 00:00:00
Date Available	2006-05-22 00:00:00
Creation Date	2006-05-26 10:23:28
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2006-05-26 10:24:03
Document Title	Your FRH set should contain the following:
Document Creator	Word 用 Acrobat PDFMaker 6.0
Document Author:	FCA

PK-FSM-2.4G/R603FS
Radio Control
Instruction Manual
INTRODUCTION
Thank you for purchasing a FutabaR digital proportional R/C system. In order for you to
make the best use of your system and to use it safely, please read this manual carefully. If
you have any difficulties while using your system, please consult the manual, our online
Frequently Asked Questions (on the web pages referenced below), your hobby dealer, or the
Futaba Service Center.
Owner’s Manual and Additional Technical Help
This manual has been carefully written to be as helpful to you, the new owner, as possible.
There are many pages of setup procedures and examples. However, it need not be your sole
resource of setup guidelines. For example, the back cover includes a quick-start set of
instructions and the Frequently Asked Questions web page referenced below includes this
type of step-by-step setup instructions for a variety of other model types.
Due to potential unforeseen changes in production procedures, the information contained in
this manual is subject to change without notice. No part of this manual may be reproduced in
any form, at any time, without prior permission.
Support and Service: It is recommended to have your Futaba equipment serviced annually
during your hobby’s “off season” to ensure safe operation.
IN NORTH AMERICA
Please feel free to contact the Futaba Service Center for assistance in operation,
use and programming. Please be sure to regularly visit the Frequently Asked
Questions web site referenced below. This page includes extensive programming,
use, set up and safety information on your radio system and is updated regularly.
Any technical updates and US manual corrections will be available on this web page.
If you do not find the answers to your questions there, please see the end of our
F.A.Q. area for information on contacting us via email for the most rapid and
convenient response.
Don’t have Internet access? Internet access is available at no charge at most
public libraries, schools, and other public resources. We find internet support to be a
fabulous reference for many modelers as items can be printed and saved for future
reference, and can be accessed at any hour of the day, night, weekend or holiday. If
you do not wish to access the internet for information, however, don’t worry. Our
support teams are available Monday through Friday 8-5 Central time to assist you.
HOW TO SEND FOR SERVICE:
www.hobbyservices.com\techsupport\service-form-futaba.pdf
www.hobbyservices.com\techsupport\service-form-futaba.html
OUTSIDE NORTH AMERICA
Please contact your Futaba importer in your region of the world to assist you with
any questions, problems or service needs.
Please recognize that all information in this manual, and all support availability, is
based upon the systems sold in North America only. Products purchased elsewhere
may vary. Always contact your region’s support center for assistance.
The product is subject to regulations of the FCC and is restricted
under United States law to such purposes.
1. Exportation precautions:
(a) When this product is exported from the country of manufacture, its use is to be
approved by the laws governing the country of destination which govern devices
that emit radio frequencies. If this product is then re-exported to other countries,
it may be subject to restrictions on such export. Prior approval of the appropriate
government authorities may be required. If you have purchased this product from an
exporter outside your own country and not the authorized Futaba distributor
in your country, please contact the seller immediately to determine if such export
regulations have been met.
2. Modification, adjustment, and replacement of parts: Futaba is not responsible for
unauthorized modification, adjustment, and replacement of parts on this product.
Any such changes may void the warranty.
The Following Statement Applies to the Receiver (for U.S.A.)
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesirable operation.
Physical Description
Please review the following section and take a moment to familiarize yourself with the PKFSM-2.4G/R603FS .
IPK-FSM-2.4G (Transmitter)
PIN ASSIGNMENT
#1
#5
Fig.1 Serial Communication Connector Location
Table 1 Pin Description
Pin
Abbreviation
PPM MOD
Vcc
MET
GND
NC
I/O
in
in
out
−
−
Function
Pulse position data
VLI 0V VHI 3V
Vcc:9.6V
Transmission indicator
signal ground
NC
Pulse position data
Data frame
1ch
2ch
Data frame
3ch/RESET
1ch
2ch
3ch/RESET
Table 2 Pulse position data
Item
【1ch】
【2ch】
【3ch/RESET】
minimum
center
maximum
Remarks
800us
800us
1500us
1100us
1100us
1400us
1400us
1100±300us
1100±300us
1800us
2100us
1800±300us
Set Frequency Pattern in rotary SW(0 or 8)
SW 0 : 2405.376 - 2479.104 MHz 36CH
SW 8 : 2405.376 - 2450.432 MHz 22CH
PK-FSM-2.4G fires an electric wave at the frequency that I set in rotary SW by
power supply re-injection.
R603FS(Receiver)
Set frequency SW １ｓｅｃ ＰＵＳＨ （ＡＵＴO ＳＥＴＴＩＮＧ）
Fig.2
Frequency Allocation
The PK-FSM-2.4G/R603FS can operate on 36(or22) available frequencies between
2405.376 MHz and 2479.104 MHz with 2.048 MHz separation between each frequency.
See the table below for the exact frequency assignments.
Channel
№
0２
0４
0６
0８
１０
１２
１４
１６
１８
２０
２２
２４
２６
２８
３０
３２
３４
３６
Table 3 ：Frequency Channel
Frequency
Channel
Frequency
(MHz) №
(MHz)
２４０５．３７６
３８
２４４２．２４０
２４０７．４２４
４０
２４４４．２８８
２４０９．４７２
４２
２４４６．３３６
２４１１．５２０
４４
２４４８．３８４
２４１３．５６８
４６
２４５０．４３２
２４１５．６１６
４８
２４５２．４８０
２４１７．６６４
５０
２４５４．５２８
２４１９．７１２
５２
２４５６．５７６
２４２１．７６０
５４
２４５８．６２４
２４２３．８０８
５６
２４６０．６７２
２４２５．８５６
５８
２４６２．７２０
２４２７．９０４
６０
２４６４．７６８
２４２９．９５２
６２
２４６６．８１６
２４３２．０００
６４
２４６８．８６４
２４３４．０４８
６６
２４７０．９１２
２４３６．０９６
６８
２４７２．９６０
２４３８．１４４
７０
２４７５．００８
２４４０．１９２
７２
２４７７．０５６
７４
２４７９．１０４
Specification
PK-FSM-2.4G SPECIFICATIONS
1 Radio Characteristics
Engineering standard
Part 15.247 FCC(U.S.)
RF power output
100mW EIRP
Modulation
Direct-Sequence Spread-Spectrum
Communication scheme Single communication
Frequency band
2405.352MHz - 2479.104MHz
Channel
36/22
Data barer rate
136 kbps
6 dB bandwidth
1.6MHz
Frequency control
Crystal controlled frequency synthesizer
Antenna
1/2λ Pencil type antenna 1.6dBi
Operating Distance
150m
2 Radio communication control
Error checking
CRC-CCITT
3 Terminal interface
Physical interface
5 pins
4 Power Supplying
Supply voltage
9.6V DC
Current consumption
110 mA
5 Environmental
Operating temperature
-10 to +60 ℃
Storage temperature
-20 to +70 ℃
6 Miscellaneous
Indicator
Frequency setting
Memory register
Case
Outer dimensions
Weight
2 color LED
Rotary SW
Rewritable times: approx. 1 million times
Plastic
38 (W)×60(D)×21(H)mm
Aprox. 35g
R603FS SPECIFICATIONS
1 Radio Characteristics
Engineering standard
Part 15.247 FCC(U.S.)
Frequency band
2405.352MHz - 2479.104MHz
Channel
36/22
Data barer rate
136 kbps
Frequency control
Crystal controlled frequency synthesizer
Antenna
1/2λ SMD type antenna -5dBi
Operating Distance
150m
2 Radio communication control
Error checking
CRC-CCITT
3 Terminal interface
Physical interface
15 pins
4 Power Supplying
Supply voltage
6V DC
Current consumption
80 mA
5 Environmental
Operating temperature
-10 to +60 ℃
Storage temperature
-20 to +70 ℃
6 Miscellaneous
Indicator
2 color LED
Memory register
Rewritable times: approx. 1 million times
Case
Plastic
Outer dimensions
26(W)×40(D)×14.5(H)mm
Weight
Aprox. 14g

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:a867d8b7-7872-4cb9-8e26-003c67bab58b
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Company                         : FCA
Source Modified                 : D:20060526012252
Headline                        : 
Creator Tool                    : Word 用 Acrobat PDFMaker 6.0
Modify Date                     : 2006:05:26 10:24:03+09:00
Create Date                     : 2006:05:26 10:23:28+09:00
Metadata Date                   : 2006:05:26 10:24:03+09:00
Document ID                     : uuid:deffc783-7b45-4a68-a428-0cb59324b607
Version ID                      : 4
Format                          : application/pdf
Title                           : Your FRH set should contain the following:
Creator                         : FCA
Subject                         : 
Tagged PDF                      : Yes
Author                          : FCA

EXIF Metadata provided by EXIF.tools