G4S Technology S680A S680 Proximity Card Reader User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2123066
Application ID	z6HVxXYoPaV+DJvm10G1xg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.14kB (401741 bits)
Date Submitted	2013-11-20 00:00:00
Date Available	2013-11-20 00:00:00
Creation Date	2013-11-07 10:53:31
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2013-11-07 11:13:29
Document Title	9600-0199 Issue 2.0x1 - S680 Installation and User Instruction
Document Creator	CorelDRAW
Document Author:	Watts;Andrew

Installation and User Instructions for S680 & S690 Readers
The S680 and S690 readers are 125kHz proximity card
®
readers that are capable of reading HID format card,
with LED’s. The readers use 20mA current loop
communications.
For additional information regarding the installation,
configuration and proper use of this product please
refer to:
M2150 Design Guide, P/N 9600-0420 Issue 1.6.4 or
later and SMS Software User Guide, P/N 9600-0429
Issue 7.0.4 or later.
Mount the Reader
Mount the backplate using
countersunk headed screws
adjacent to the opening edge
of the door.
You should find that the
backplate has holes for
connection to most standard
electrical back boxes.
You can remove the front cover by
easing it off gently with a screwdriver
at this point
Reader Connections
Note: (For UL Listed Products)
1). Consult local AHJ (Authority Having Jurisdiction) when installing access control readers and locking
mechanisms to any portal in an egress path.
2). The use of Fail Closed / secure configuration shall be determined by local building codes and the
local AHJ.
3). Wiring methods shall be in accordance with NEC (National Electrical Code) ANSI/NFPA 70.
4). All Interconnected devices must be UL listed.
5). For UL294 Installations the S680 and S690 Readers have only been determined compatible to be
used with the M2150 Series Control and Elevator Units.
3
Reader Connections contd.
20mA current loop
Shielded Belden 9537 7x24 awg cable UL Listed style 2464 (DUZX) cable.
Controller
12V
Red
12V
0V
Black
0V
RX-
Green TX+
Orange TX-
TX+
White
RX+
TX-
Blue
RX-
RX+
Maximum distance 150m
Connect shield at
controller end only.
680/690 Reader
Note:
Brown wire not used
Using / Testing the Reader
Present the card face-on to the reader until you hear a "bleep". The reader is now working correctly. Cards can
be presented in rapid succession; there is no need, for example, to wait for "GREEN LED’s" to disappear before
presenting another.
When faulted, the reader can not accept a card read. Check wiring for faults or replace reader.
LED Status Indicator
GREEN – The lock is released and you may open the door.
RED – You do not have access rights to gain entry, or the reader did not read your card properly (in this case,
present it again).
9600-0199. Installation and User Instructions for S680/690 Readers,
Issue 2.0x1 5th November 2013. © G4S Technology, 2013.
FCC Notice: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Any unauthorized modification to this device may void the authority of
the user to operate it. All trademarks acknowledged.
Specifications
Input voltage: 12Vdc.
Input current: 100mA Max.
Operating temperature: -13 to 158°F (-25 to 70°C)
Operating humidity: 90%, non-condensing.
Maximum read range: 4" (100mm).
Approvals: EN300330, EN301489

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Watts;Andrew
Create Date                     : 2013:11:07 10:53:31Z
Modify Date                     : 2013:11:07 11:13:29Z
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Watts;Andrew
Title                           : 9600-0199 Issue 2.0x1 - S680 Installation and User Instruction
Creator Tool                    : CorelDRAW
Metadata Date                   : 2013:11:07 11:13:29Z
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:d2afaeff-5e28-47ff-8c27-437321520898
Instance ID                     : uuid:1afa47d3-168f-4acd-bf4a-f41fba1d67df
Page Count                      : 2

EXIF Metadata provided by EXIF.tools