G4S Technology S813 Contactless Smart-Card & fingerprint reader User Manual Dell noir C Dell Noir Group4 Hardware manuals Reader Instructions S813 s813 eps

Download:
Mirror Download [FCC.gov]
Document ID	336641
Application ID	a0kwmjpt49VH7N6CJb7MjQ==
Document Description	S813
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.7kB (146304 bits)
Date Submitted	2003-07-01 00:00:00
Date Available	2003-07-08 00:00:00
Creation Date	2003-05-27 15:00:05
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2003-05-27 15:01:36
Document Title	\\Dell-noir\C Dell-Noir\Group4\Hardware manuals\Reader Instructions\S813\s813.eps
Document Creator	CorelDRAW(TM) Classic

Installation and User Instructions for S813 Readers
Model number:S813-KPMICLBR
The S813 is a combined fingerprint and contactless
smart-card reader with keypad that is capable of
®
®
reading Philips MIFARE DESFire formatted cards, as
well as other standard and custom formats.
The S813 uses a Bioscrypt MV1200 Sensor and
pseudo-random 20mA current loop communications.
®
TM
Mount the Backplate
You should find that the backplate has suitable holes for
connection to most standard electrical backboxes.
To mount the backplate:
1) Detach the main body of the reader from the
backplate by releasing the two securing
screws along the bottom edge of the reader,
swinging the backplate upwards and easing
it away from the two top clips.
2) Mount the backplate adjacent to the opening
edge of the door and at a convenient height,
making sure that the finger pad is easily
reached. Feed the cable to the reader
through the backplate.
TO BE REPLACED BY ILLUSTRATION
Reader Links
The following links are provided on the reader's PCB:
LK1
(Audio feedback) - Set to "0" for sound off. Set to "1" for sound on.
LK3
(Test) - Ensure that this link has been removed.
3
Reader Connections
Connect screen at controller
end only (attach to case).
Controller connections
(20mA current loop)
12V
0V
TX-
TX+
RX+
RX-
Twisted pairs (use
Belden 9503 cable)
S813 Reader TB1
RX-
+12V
I/0
RX+
TX+
TX-
0V
SCR (not used)
The I/O terminal is for connection to a
RIM - see the Installation Instructions for
S660 Remote Interface Module (RIM).
On completion, re-secure the reader to the backplate.
Using the Reader
Present the proximity card face-on close to the reader until you hear a "bleep".
After presenting your card, you may be prompted to enter a PIN and/or place your finger on the
finger pad. You may also be prompted to place a second finger on the finger pad. Follow the onscreen instructions.
The system can be set up to generate a "duress" transaction if the pre-defined duress finger is
placed on the pad. In two-finger mode, the duress finger must be placed first.
9600-0306. Installation and User Instructions for S813
Readers, Issue 1.0x1 22nd May 2003. © AMAG
Technology, 2003.
FCC Notice: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Any unauthorized modification to this device may void the
authority of the user to operate it.
All trademarks acknowledged. Philips and MIFARE are
registered trademarks of Philips Electronics, N.V. MV1200
is a trademark of Bioscrypt Inc. Bioscrypt is a registered
trademark of Bioscrypt Inc.
Specifications
Input voltage: 9-14V.
Input current: 100mA.
Operating temperature: 32 to 122°F (0 to 50°C).
Operating humidity: 15 to 90%, non-condensing.
Maximum read range: 1" (25mm).
Approvals: EN50133, R&TTE, IP605.
For internal use only.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:05:27 15:00:05
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : CorelDRAW(TM) Classic
Title                           : \\Dell-noir\C Dell-Noir\Group4\Hardware manuals\Reader Instructions\S813\s813.eps
Modify Date                     : 2003:05:27 15:01:36+01:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools