G4S Technology S822 S822 Access Control Proximity Reader User Manual S822 User Instructions

Download:
Mirror Download [FCC.gov]
Document ID	396413
Application ID	Poe+xKnCfEkR8NYQ358WNQ==
Document Description	S822 User Instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.51kB (93834 bits)
Date Submitted	2004-02-13 00:00:00
Date Available	2004-02-13 00:00:00
Creation Date	2003-11-18 15:36:22
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2003-11-18 15:45:03
Document Title	\\Dell-noir\C Dell-Noir\Group4\PDF folder\Drafts waiting for approval\S822 Installation Instructions.eps
Document Creator	CorelDRAW(TM) Classic

Installation and User Instructions for S822 Readers
The S822 is a contactless smart-card reader, which uses
20mA current loop pseudo-random communications. The
®
TM
S822 is able to read HID iCLASS smart cards, and the
®
®
card serial number on Philips MIFARE smart cards.
For either type of card, the S822 supports the use of
unencoded cards (where only the unique card serial
number is read). In the case of HID iCLASS cards, an
encoded card number can be read. Encoding formats
supported include HID's own formats and the "smartMAX"
format.
Mount the Backplate
The backplate has suitable holes for connection to most standard electrical backboxes.
To mount the backplate:
1) Detach the main body of the reader from the
backplate by releasing the two securing screws
along the bottom edge of the reader.
2) Mount the backplate adjacent to the opening edge
of the door and at a convenient height. Feed the
cable to the reader through the backplate.
2
Reader Connections
20mA Current Loop Reader Connections
Controller connections
(20mA reader port)
0V
Rx+
RxTx+
Tx-
Connect shield at
controller end only
(connect to case)
Red
Black
Green
Orange
Reader
12V
White
Blue
Note: the brown
wire is not used
Using the Reader
Present the card face-on to the reader until you hear a "bleep". If the green indicator is lit, the card
has been accepted and the door is unlocked. If the red indicator is lit, either the card has not been
accepted, or you do not have access through the door. If the read and green indicators flash
alternatively, please wait.
Note: cards can be presented in rapid succession - there is no need to wait for the green or red
LED to extinguish before presenting another card.
9600-0305. Installation and User Instructions for S822 Readers,
Issue 1.0x10 18th November 2003. © AMAG Technology, 2003.
FCC Notice: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
Any unauthorized modification to this device may void the
authority of the user to operate it.
All trademarks acknowledged. HID is a registered trademark of
HID Corporation. iCLASS is a trademark of HID Corporation.
Philips and MIFARE are registered trademarks of Philips
Electronics, NV.
Specifications
Input voltage: 9-14V.
Input current: 100mA @ nominal 12Vdc supply.
Operating temperature: -13 to 158°F (-25 to 70°C).
Operating humidity: 15 to 90%, non-condensing.
Maximum read range: 2.5" (65mm).
Approvals: EN50133, R&TTE, IP656.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:11:18 15:36:22
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : CorelDRAW(TM) Classic
Title                           : \\Dell-noir\C Dell-Noir\Group4\PDF folder\Drafts waiting for approval\S822 Installation Instructions.eps
Modify Date                     : 2003:11:18 15:45:03Z
Page Count                      : 2

EXIF Metadata provided by EXIF.tools