G4S Technology S830 Proximity Card Reader User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	335717
Application ID	DaOxs6b9f/z2AfE6A9L/4w==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.84kB (272965 bits)
Date Submitted	2003-06-26 00:00:00
Date Available	2003-06-26 00:00:00
Creation Date	2003-06-10 13:11:36
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2003-06-10 15:50:36
Document Title	\\Dell-noir\C Dell-Noir\Group4\Hardware manuals\Reader Instructions\s830\s830.eps
Document Creator	CorelDRAW(TM) Classic

Installation and User Instructions for S830 Readers
Model number:S830-HICLR
The S830 is a small-footprint 125kHz proximity card
®
reader that is capable of reading HID format cards.
The S830 uses 20mA current loop pseudo-random
communications.
Mount the Backplate
To mount the backplate:
1) Detach the main body of the reader from the
backplate by inserting a fingernail into the groove in
the bottom edge of the reader and swinging the
reader upwards.
2) Mount the backplate adjacent to the opening edge
of the door and at a convenient height. Feed the
cable to the reader through the backplate.
2
Reader Connections
20mA Current Loop
Reader Connections
Controller connections
(20mA reader port)
0V
Rx+
RxTx+
Tx-
Connect screen at
controller end only
(attach to case)
Red
Black
Green
Orange
White
Blue
12V
0V
Tx+
Tx-
Reader
12V
Rx+
Rx-
Note: the brown
wire is not used
Using the Reader
Present the proximity card face-on to the reader until you hear a "bleep". The maximum read range
is typically 2.5" (65mm). If the green indicator is lit, the card has been accepted and the door is
unlocked. If the red indicator is lit, either the card has not been accepted, or you do not have
access through the door.
Note: cards can be presented in rapid succession - there is no need to wait for the green or red
LED to extinguish before presenting another card.
9600-xxxx. Installation and User Instructions for S830
Readers, Issue 1.0x2 10th June 2003. © AMAG
Technology, 2003.
FCC Notice: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Any unauthorized modification to this device may void the
authority of the user to operate it.
All trademarks acknowledged. HID is a registered
trademark of HID Corporation.
Specifications
Input voltage: 9-14V.
Input current: 75mA @ nominal 12Vdc supply.
Operating temperature: -4 to 150°F (-20 to 70°C).
Operating humidity: 15 to 90%, non-condensing.
Maximum read range: 2.5" (65mm).
Approvals: EN50133, R&TTE, IP656.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:06:10 13:11:36
Producer                        : Acrobat Distiller 4.05 for Windows
Creator                         : CorelDRAW(TM) Classic
Title                           : \\Dell-noir\C Dell-Noir\Group4\Hardware manuals\Reader Instructions\s830\s830.eps
Modify Date                     : 2003:06:10 15:50:36+01:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools