GIANT NEOSTRACK GPS enabled cycling computer User Manual neostrack QSG 20161121

Giant Manufacturing Co., Ltd. GPS enabled cycling computer neostrack QSG 20161121

Users Manual

ENIcon DescriptionNo Signal (not fixed)Weak Signal (fixed) Bike 1-7Strong Signal (fixed)Log Record in ProgressCadence Sensor active / inactive Speed Sensor active / inactivePower StatusHeart Rate Sensor active / inactive Recording is pausedCurrent speed is faster/ slower than average speed/45321Power Sensor active / inactive Di2 Sensor ActiveCombo Sensor active / inactive• • • 4PAGE ( )In free cycling mode, long press to return to Main Menu.In Meter view, press to switch meter In Menu, press to move down to scroll through menu options. • When recording, long press to enter intoShortcut Menu. screen page. • • 1BACK ( )Press to return to the previous page or cancel an operation. When recording, press to pause recording. Press it again to stop recording.( )• • • 2LAP/OK In Menu, press to enter or confirm a selection. When recording, press to mark the lap.In free cycling*, press to start recording.5• • UP ( )In Meter view, press to switch meter screen page. In Menu, press to move up to scroll through menu options. ( ) • • • 3ON/OFFPress and hold to turn the device off.Press to turn the device on.Press to turn on/off backlight.* Free cycling is a mode with no recording. neostrack syncs with the movement of bicycles. It starts when you start pedaling, allowing you to view real time data without recording. 1
English繁中簡中FrançaisLanguageBefore first use, please charge your device for at least 4 hours. To begin 1. Press to turn on the device. 2. Press to select the display language and press to confirm the selection. 3. Device will search for satellite signals. 4. After GPS signal is fixed *, ( ) just ride on and enjoy your workout in free cycling mode, and to record, press to start recording.* To get GPS acquisition, please take the device to an open sky outdoor environment. With Track feature, you can plan trip via neostracker App, use pervious rides from History or download gpx tracks online.Plan Trip via Giant neostracker App1. Download neostracker app. 2. Sign up / log in on neostracker app. 3. Tap Plan Trip to start planing trip by putting pins on map or entering locations in the slide menu. 4. Download the planned trip to the device via Sync. 5. In the Main Menu, select Track > Route and select the planned track and press to start following the track. From device History1. In the Main Menu, select History > View to select the desired tracks. 2. Select Create Track 3. Enter a name of the track and press to save it. 4. Press to be back to the Main Menu. 5. Select Track TrackStep 4Step 3Step 2Step 1Getting Started EN2
With the access to the internet, your neostrack computer automatically updates GPS data, uploads recorded tracks, downloads planned trips from app server and checks for available firmware update.It is required to add your device to your Giant neostracker account before syncing data for the first time. To add. 1. Scan the QR code labeled on the device securing paperboard inside the box with your smartphone to download neostracker App. 2. After neostracker App is installed, please sign up for an account. 3. In the app, tap “Scan Now” to scan the same QR code labeled on the device securing paperboard to add its UUID to your neostracker App account (or go to neostracker App: Setup > My Setup > Device Manager later). 4. If a “successfully added!” message pops up on the neostracker App, you have successfully added your device to your neostracker account. If not, please tap “Retry” to scan again or enter the 16 digit device UUID number on the back of your device manually. EN Sync (WLAN)Sync Data to / from Giant neostracker App> Route and select the saved track and press to start following the track. From 3rd Party Websites1. Download gpx files to your computer. 2. Use USB cable to connectthe device to the computer. 3.Copy the gpx files from your computerand paste to the Add Files folder of the device. 4. Remove USB cable. 5. In the Main Menu, select Track > Route and press to start following the track. To perform Sync, please first go to your device: Setup > Network > Connect to set a wireless network connection, then go to Sync in the main menu and let your computer smartly guide you through the syncing process.Note: ● Firmware updates usually take longer to download and install, select NO if you prefer to update it on your next sync.3
Sensor PairIn the Main Menu, select Setup>Bike Data>Bike 1>Sensors>Heart Rate,Speed,Cadence,Speed/CAD,Power,Di2>More>Rescan Share Your Tracks via USB1.Connect the device to your computer via USB cable. 2. Select fit files from Giant folder in the device. 3. Upload files to popular training sites including STRAVA, Training Peaks, Endomondo, Map My Ride, Fit track and many more. ENReset NeostrackLong press all three keys ( / / ) at the same time to reset the device.Note:Please go to corp.brytonsport.com > Support > Download to download User’s Manual.Item DescriptionDisplay 2.6" dot-matrix LCDPhysical Size 92.9 x 57 x 20.3 mmWeight 78gOperating Temperature-10°C ~ 50°CBattery ChargingTemperature 0°C ~ 40°CBattery Li polymer rechargeable batteryBattery Life 33 hours with open skyGPS Integrated high-sensitivity GPS receiver with embedded antenna ANT+™IEEE 802.11 b/g/nWireless LocalArea NetworkFeaturing certied wireless ANT+™ connectivity.Visit www.thisisant.com/directory for compatible products Water ResistantBLE Smart Bluetooth smart wireless technology with embedded antennaWithstand immersion in water up to 1meter for up to 30 minutesSpecication4
Installationor
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 1.5 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 1.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 1.5 cm between the radiator and your body. Cet équipement est conforme aux CNR-102 d'Industrie Canada. Cet équipement doit êtreinstallé et utilisé avec une distance minimale de 1.5 centimètres entre le radiateur et votrecorps. Cet émetteur ne doit pas être co-localisées ou opérant en conjonction avec autreantenne ou émetteur. Les antennes utilisées pour cet émetteur doivent être installés etfournir une distance de séparation d'au moins 1.5 centimètre de toute personne et doit pas être co-située ni fonctionner en conjonction avec une autre antenne ou émetteur.

Navigation menu