GIANT NEOSTRACK GPS enabled cycling computer User Manual neostrack QSG 20161121

Download:
Mirror Download [FCC.gov]
Document ID	3262462
Application ID	dpQxN2qw3MquVUnPtZRggA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	153.73kB (1921625 bits)
Date Submitted	2017-01-17 00:00:00
Date Available	2017-01-17 00:00:00
Creation Date	2016-12-13 15:33:04
Producing Software	Adobe PDF library 9.90
Document Lastmod	2017-01-16 14:52:20
Document Title	neostrack_QSG_20161121
Document Creator	Adobe Illustrator CS6 (Windows)

EN
1 BACK (
• Press to return to the previous page or
cancel an operation.
• When recording, press to pause recording.
Press it again to stop recording.
2 LAP/OK (
• In Menu, press to enter or confirm a
selection.
• In free cycling*, press to start recording.
• When recording, press to mark the lap.
3 ON/OFF (
• Press to turn the device on.
• Press and hold to turn the device off.
• Press to turn on/off backlight.
4 PAGE (
5 UP (
• In Menu, press to move down to scroll
• In Menu, press to move up to
• In Meter view, press to switch meter
• In Meter view, press to switch
through menu options.
screen page.
• In free cycling mode, long press to return
to Main Menu.
• When recording, long press to enter into
Shortcut Menu.
scroll through menu options.
meter screen page.
* Free cycling is a mode with no recording. neostrack syncs with the movement of bicycles.
It starts when you start pedaling, allowing you to view real time data without recording.
Icon Description
Bike 1-7
Speed Sensor
active / inactive
Log Record in Progress
No Signal (not fixed)
Cadence Sensor
active / inactive
Recording is paused
Weak Signal (fixed)
Combo Sensor
active / inactive
Strong Signal (fixed)
Power Sensor
active / inactive
Heart Rate Sensor
active / inactive
Power Status
Current speed is faster/
slower than average speed
Di2 Sensor Active
EN
Getting Started
Before first use, please charge your device for at least 4 hours. To
begin 1. Press
to turn on the device. 2. Press to select the
display language and press
to confirm the selection. 3. Device
will search for satellite signals. 4. After GPS signal is fixed *,
) just ride on and enjoy your workout in free cycling mode,
and to record, press
to start recording.
* To get GPS acquisition, please take the device to an open sky outdoor environment.
Step 1
Step 2
Step 3
Step 4
Language
English
繁中
簡中
Français
Track
With Track feature, you can plan trip via neostracker App, use
pervious rides from History or download gpx tracks online.
Plan Trip via Giant neostracker App
1. Download neostracker app. 2. Sign up / log in on neostracker app.
3. Tap Plan Trip to start planing trip by putting pins on map or
entering locations in the slide menu. 4. Download the planned trip
to the device via Sync. 5. In the Main Menu, select Track > Route
and select the planned track and press
to start following the track.
From device History
1.In the Main Menu, select History > View to select the desired tracks.
2. Select Create Track 3. Enter a name of the track and press to
save it. 4. Press
to be back to the Main Menu. 5. Select Track
EN
> Route and select the saved track and press
to start following
the track.
From 3rd Party Websites
1. Download gpx files to your computer. 2. Use USB cable to connect
the device to the computer. 3.Copy the gpx files from your computer
and paste to the Add Files folder of the device. 4. Remove USB cable.
5. In the Main Menu, select Track > Route and press
to start
following the track.
Sync (WLAN)
Sync Data to / from Giant neostracker App
With the access to the internet, your neostrack computer automatically
updates GPS data, uploads recorded tracks, downloads planned trips
from app server and checks for available firmware update.
It is required to add your device to your Giant neostracker account before
syncing data for the first time. To add. 1. Scan the QR code labeled on
the device securing paperboard inside the box with your smartphone to
download neostracker App. 2. After neostracker App is installed,
please sign up for an account. 3. In the app, tap “Scan Now” to scan the
same QR code labeled on the device securing paperboard to add its
UUID to your neostracker App account (or go to neostracker App:
Setup > My Setup > Device Manager later). 4. If a “successfully added!”
message pops up on the neostracker App, you have successfully added
your device to your neostracker account. If not, please tap “Retry” to
scan again or enter the 16 digit device UUID number on the back of your
device manually.
To perform Sync, please first go to your device: Setup > Network >
Connect to set a wireless network connection, then go to Sync in the
main menu and let your computer smartly guide you through the syncing
process.
Note:
● Firmware updates usually take longer to download and install, select
NO if you prefer to update it on your next sync.
EN
Share Your Tracks via USB
1.Connect the device to your computer via USB cable. 2. Select fit files
from Giant folder in the device. 3. Upload files to popular training sites
including STRAVA, Training Peaks, Endomondo, Map My Ride, Fit
track and many more.
Reset Neostrack
Long press all three keys ( /
at the same time to reset the device.
Specification
Item
Description
Display
2.6"
Physical Size
92.9 x 57 x 20.3 mm
Weight
78g
Operating
Temperature
-10°C ~ 50°C
Battery Charging
Temperature
0°C ~ 40°C
Battery
Li polymer rechargeable battery
Battery Life
33 hours with open sky
Featuring certified wireless ANT+™ connectivity.Visit
www.thisisant.com/directory for compatible products
ANT+™
dot-matrix LCD
GPS
Integrated high-sensitivity GPS receiver with embedded antenna
BLE Smart
Bluetooth smart wireless technology with embedded antenna
Water Resistant
Withstand immersion in water up to 1meter for up to 30 minutes
Wireless Local
Area Network
IEEE 802.11 b/g/n
Sensor Pair
In the Main Menu, select Setup>Bike Data>Bike 1>Sensors>
Heart Rate,Speed,Cadence,Speed/CAD,Power,Di2>More>Rescan
Note:
Please go to corp.brytonsport.com > Support > Download
to download User’s Manual.
Installation
or
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface cables
when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 1.5 centimeters between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation
distance of at least 1.5 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Industry Canada Statement
This device complies with Industry Canada licence-exempt RSS standard.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 1.5 cm between the radiator and your body.
Cet équipement est conforme aux CNR-102 d'Industrie Canada. Cet équipement
doit êtreinstallé et utilisé avec une distance minimale de 1.5 centimètres entre
le radiateur et votrecorps. Cet émetteur ne doit pas être co-localisées ou opérant
en conjonction avec autreantenne ou émetteur. Les antennes utilisées pour cet
émetteur doivent être installés etfournir une distance de séparation d'au moins
1.5 centimètre de toute personne et doit pas être co-située ni fonctionner en
conjonction avec une autre antenne ou émetteur.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:12:13 15:33:04+08:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2017:01:16 14:52:20+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : neostrack_QSG_20161121
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Metadata Date                   : 2017:01:16 14:52:20+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 116
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 10433 bytes, use -b option to extract)
Original Document ID            : uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7
Document ID                     : xmp.did:8AB91686E4C0E611A842ECED45E49646
Instance ID                     : uuid:28f20194-e78f-497c-bb78-fa65e7136241
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:89B91686E4C0E611A842ECED45E49646
Derived From Document ID        : xmp.did:89B91686E4C0E611A842ECED45E49646
Derived From Original Document ID: uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:BE08F2F86DA1E6118A51DACCFC9F3C98, xmp.iid:8AB91686E4C0E611A842ECED45E49646
History When                    : 2016:11:03 18:19:21+08:00, 2016:12:13 15:33:05+08:00
History Software Agent          : Adobe Illustrator CS5.1, Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Users\sherry_P\Desktop\Bryton\02 Products\Giant\neostrack\QSG\ANT.icon.SHFT.FA.jpg, D:\000-Project\GIANT\UI\Neostrack Icon20161121\Speed(st 1).bmp, D:\000-Project\GIANT\UI\Neostrack Icon20161121\POWER (st 1)-uncontact.bmp, D:\000-Project\GIANT\UI\Neostrack Icon20161121\POWER (st 1).bmp, D:\000-Project\GIANT\UI\Neostrack Icon20161121\Speed(st 1)-uncontact.bmp, D:\000-Project\GIANT\UI\Neostrack Icon20161121\HR(st 1)-uncontact.bmp, D:\000-Project\GIANT\UI\Neostrack Icon20161121\COMBO (st 1)-uncotact.bmp, D:\000-Project\GIANT\UI\Neostrack Icon20161121\COMBO (st 1).bmp, D:\000-Project\GIANT\UI\Neostrack Icon20161121\CAD(st 1)-uncontact.bmp, D:\000-Project\GIANT\UI\Neostrack Icon20161121\CAD(st 1).bmp, D:\000-Project\GIANT\UI\整理過後icon\GPS 3.bmp, D:\000-Project\GIANT\UI\整理過後icon\GPS 0.bmp, D:\000-Project\GIANT\UI\整理過後icon\Pause(st 1).bmp, D:\000-Project\GIANT\UI\整理過後icon\HR(st 1).bmp, D:\000-Project\GIANT\UI\整理過後icon\GPS 3.bmp, D:\000-Project\GIANT\UI\整理過後icon\GPS 1.bmp, D:\000-Project\GIANT\UI\整理過後icon\GPS 0.bmp, D:\000-Project\GIANT\UI\整理過後icon\Bike 1.bmp, D:\000-Project\GIANT\UI\整理過後icon\Battery Full.bmp, D:\000-Project\GIANT\UI\整理過後icon\Battery 1.bmp, D:\000-Project\GIANT\UI\整理過後icon\REC(st 1).bmp
Startup Profile                 : Basic RGB
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 91.999897
Max Page Size H                 : 110.000004
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold, MicrosoftJhengHeiUIBold
Font Family                     : Arial, Arial, Myriad Pro, Myriad Pro, Myriad Pro, Microsoft JhengHei UI
Font Face                       : Regular, Bold, Regular, Semibold, Bold, Bold
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, TrueType
Font Version                    : Version 5.21, Version 5.21, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.10
Font Composite                  : False, False, False, False, False, False
Font File Name                  : arial_0.ttf, arialbd_0.ttf, MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Bold.otf, MSJHBD.TTC
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Cyan    : 58.000000
Swatch Groups Colorants Magenta : 0.000000
Swatch Groups Colorants Yellow  : 80.000000
Swatch Groups Colorants Black   : 0.000000
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 灰階
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: R=242 G=242 B=242
Swatch Groups Colorants Mode    : RGB
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Red     : 242
Swatch Groups Colorants Green   : 242
Swatch Groups Colorants Blue    : 242
Producer                        : Adobe PDF library 9.90
Page Count                      : 7
For                             : sherry_P,
Bounding Box                    : -256 -289 1255 394
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools