GIGA BYTE TECHNOLOGY MSN09C01 NFC Controller Module with Integrated Antenna User Manual SM MSN09 C01 UserMan
GIGA-BYTE TECHNOLOGY CO., LTD. NFC Controller Module with Integrated Antenna SM MSN09 C01 UserMan
(SM-MSN09-C01) UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2527400 |
| Application ID | LNMjLtkKIU4idgoJ0eIUTg== |
| Document Description | (SM-MSN09-C01) UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 102.51kB (1281354 bits) |
| Date Submitted | 2015-02-09 00:00:00 |
| Date Available | 2015-02-11 00:00:00 |
| Creation Date | 2015-01-26 18:03:38 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2015-02-05 09:52:03 |
| Document Title | (SM-MSN09-C01) UserMan |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | USER |
Macaron N Series SM-MSN09-C01 NFC Controller Module with Integrated Antenna Datasheet Version 1.0 Smart Approach Co., Ltd. 4F,No.669,Sec.4.Chung Hsing Rd., Chutung, Hsinchu 310, Taiwan, R.O.C. +886-3-5830303 www.smart-approach.com.tw SM-MSN09-C01 Datasheet Smart Approach Co., Ltd (“S.A.”) retains the right to make changes to its products or specifications to improve performance, reliability or manufacturability. All information in this document, including descriptions of features, functions, performance, technical specifications and availability, is subject to change without notice at any time. While the information furnished herein is held to be accurate and reliable, no responsibility will be assumed by Smart Approach for its use. Furthermore, the information contained herein does not convey to the purchaser of microelectronic devices any license under license under the patent right of any manufacturer. Smart Approach Co., Ltd is a registered trademark. All other products or service names used in this publication are for identification purposes only, and may be trademarks or registered trademarks of their respective companies. All other trademarks or registered trademarks mentioned herein are the property of their respective holders. Feedback on the use of any of the document is welcomed and encouraged by Smart Approach. Please contact service@smart-approach.com.tw for your feedback or any ordering inquiry. Please contact support@smart-approach.com.tw for any technical question. -2- Revision 1.0 June 2014 SM-MSN09-C01 Datasheet FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux norms CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes: cet appareil ne doit pas provoquer d’interférences et cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. -3- Revision 1.0 June 2014 SM-MSN09-C01 Datasheet 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、 加 大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信； 經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信 法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電 機設備之干擾。 Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: JCK-MSN09C01 ” and "Contains IC: 6655A-MSN09C01“ -4- Revision 1.0 June 2014 SM-MSN09-C01 Datasheet Revision History This section describes the changes that were implemented in this document. The changes are listed by revision, starting with the most current publication. Revision 1.0 Revision 1.0 of this datasheet was published in June 2014. This was the first publication of the document. -5- Revision 1.0 June 2014 SM-MSN09-C01 Datasheet Contents REVISION HISTORY ............................................................................................................................. - 5 CONTENTS ........................................................................................................................................... - 6 FIGURE CONTENTS ............................................................................................................................ - 7 TABLE CONTENTS .............................................................................................................................. - 7 1 INTRODUCTION .......................................................................................................................... - 8 - PRODUCT OVERVIEW ................................................................................................................ - 9 - 2.1 FEATURES .............................................................................................................................. - 9 - 2.2 APPLICATION .......................................................................................................................... - 9 - FUNCTIONAL DESCRIPTIONS ................................................................................................ - 11 3.1 COMMUNICATION OVERVIEW FOR ISO/IEC 14443A / MIFARE CONTROLLER .......................... - 12 - ELECTRICAL SPECIFICATIONS .............................................................................................. - 13 4.1 PIN DESCRIPTION ................................................................................................................. - 13 - 4.2 I C ADDRESS ....................................................................................................................... - 14 - 4.3 TEMPERATURE MAXIMUM RATINGS ........................................................................................ - 14 - 4.4 DC ELECTRICAL PARAMETERS .............................................................................................. - 14 - 4.5 ANTENNA SPECIFICATIONS .................................................................................................... - 15 - 4.6 POWER CONSUMPTION ......................................................................................................... - 15 - 4.7 THERMAL PROTECTION ......................................................................................................... - 16 - 4.8 SYSTEM POWER MODES ........................................................................................................ - 16 - 4.9 RESET AND DOWNLOAD CONCEPT .......................................................................................... - 17 - 4.10 NFC CONNECTION RECOMMENDATION .................................................................................. - 18 - 4.11 MAIN BOARD DESIGN REFERENCE ........................................................................................ - 18 - ORDERING INFORMATION ...................................................................................................... - 19 - RELIABILITY VERIFICATION.................................................................................................... - 20 - NFC MODULE OUTLINE ........................................................................................................... - 21 - -6- Revision 1.0 June 2014 SM-MSN09-C01 Datasheet Figure Contents Figure 1 Typical Application ................................................................................................. - 9 Figure 2 Typical Application II ............................................................................................ - 10 Figure 3 Module Block Diagram ........................................................................................ - 11 Figure 4 Transmission Modes ........................................................................................... - 12 Figure 5 Reset via VEN pin ................................................................................................. - 17 Figure 6 Connection Recommendation ............................................................................. - 18 Figure 7 Main Board Design W/O UICC Reference ........................................................... - 18 Figure 8 Antenna Module Drawing .................................................................................... - 21 Figure 9 Module FPC Connection Footprint (Button Contact) ............................................ - 22 Figure 10 FPC Wire Dimension ......................................................................................... - 22 - Table Contents Table 1 Module Pin Description ......................................................................................... - 13 Table 2 I2C Address ........................................................................................................... - 14 Table 3 Temperature Maximum Ratings ............................................................................ - 14 Table 4 DC Electrical Specification .................................................................................... - 14 Table 5 Antenna Specifications .......................................................................................... - 15 Table 6 Current Consumption ............................................................................................ - 15 Table 7 Thermal Protection ................................................................................................ - 16 Table 8 System Power Modes Description ........................................................................ - 16 Table 9 Power Mode Configuration.................................................................................... - 17 Table 10 Reset Timing ....................................................................................................... - 17 Table 11 Ordering Information Table .................................................................................. - 19 Table 12 Reliability Item Table ........................................................................................... - 20 - -7- Revision 1.0 June 2014 SM-MSN09-C01 Datasheet 1 Introduction This document consists of descriptions and specifications for both functional and physical aspects of the SM-MSN09-C01 NFC reader / writer module. In addition to the datasheet, Smart Approach maintains and extensive device-specific library of support and collateral materials that you may find useful in your application. Depending upon the Smart Approach device, this library may include: Presentations highlighting the operational features and specifications of the device to assist in developing your own product road map. Application notes that provide detailed descriptions of the use of the particular Smart Approach product to solve real-world problems. -8- Revision 1.0 June 2014 SM-MSN09-C01 Datasheet 2 Product Overview SM-MSN09-C01 is full featured NFC controllers designed for integration in portable equipment. It is optimized for low power consumption with fully host controllable power states and for small footprint for portable equipment applications. The module’s compact, flexible design with and exposed pad is optimal for size-sensitive applications, assures robust performance. The following illustration shows a high-level, generic view of a SM-MSN09-C01 application. Figure 1 Typical Application 2.1 Features This section Tables key aspects of the SM-MSN09-C01 module functionality and design that distinguish it from similar products: NXP NPC100 NFC Controller Full featured NFC controller industry’s low power consumption. Compliant with ISO/IEC 14443 A/B Compliant with 15693/18092 Antenna pairing could be customized I2C interface The maximum of thickness is 1.5 mm. 2.2 Application Suggested applications for the SM-MSN09-C01 module include: NFC writer NFC reader NFC peer to peer controller NFC payment NFC identification -9- Revision 1.0 June 2014 SM-MSN09-C01 Datasheet Figure 2 Typical Application II SM-MSN09-C01 can be connected on a host controller through I2C-bus interfaces. The logical interface towards the host base band is NCI-compliant with additional command set for SA specific product features. SM-MSN09-C01 can be connected to a UICC through an SWP interface. The SWP physical interface is compliant with ETSI/SCP SWP and HCI. Moreover, SM-MSN09-C01 provides flexible and integrated power management unit in order to preserve energy supporting Powered by the Field and Power Off mode. It also allows various power schemes for the UICC. - 10 - Revision 1.0 June 2014 SM-MSN09-C01 Datasheet 3 Functional Descriptions This section provides detailed information about how SM-MSN09-C01 module works, what configurations and operational features are available. The following illustration shows the primary functional blocks of SM-MSN09-C01 module. Figure 3 Module Block Diagram Loop Antenna is Smart Approach customize solution, Antenna size of SM-MSN09-C01 is 40mm x 50 mm. Antenna matching is also a customize solution. NFC controller includes NXP NPC100 chipset, and has an I2C control interface through the connector to mother board. - 11 - Revision 1.0 June 2014 SM-MSN09-C01 Datasheet Figure 4 Transmission Modes For contactless card functionality, SM-MSN09-C01 can act autonomously if previously configured by the host in such a manner. PICC functionality can be supported without device being turned on or even with battery removed. 3.1 Communication overview for ISO/IEC 14443A / MIFARE Controller The contactless coprocessor and the on-chip CPU of SM-MSN09-C01 handle the complete ISO/IEC 14443A/MIFARE RF-protocol, nevertheless a dedicated external host has to handle the application layer communication. - 12 - Revision 1.0 June 2014 SM-MSN09-C01 Datasheet 4 Electrical Specifications This section provides the DC characteristics, AC characteristics, recommended operating conditions. It includes information on the various timing functions of the module. 4.1 Pin Description The following Table shows the pin description for SM-MSN09-C01 module. The connection ground is internally connected and should be connected to GND on the main board as well. Table 1 Module Pin Description PIN No. Name VBAT MOD_GND SWP SWP data line to UICC/SIM, Input / Output RFU Unused pin could be floating IRQ Interrupt to host, High: Interrupt; Low: Normal PMUVCC I C_SDA I C_SCL MOD_GND 10 VEN 11 DWL_REQ 12 SIMVCC 13 VBAT 14 VDD_IO 15 MOD_GND - 13 - Power Reference P/I/O +3.3V power supply input 3.3V Module Ground GND PMUVCC I/O VDD_IO Description Power supply to UICC/SIM, input, + 1.8V 1.8V VDD_IO I/O VDD_IO GND VBAT Firmware download control: Active High VDD_IO The power rail used to power UICC / SIM, output pin PMUVCC P(O) 3.3V 1.8V/3.3V GND I C Data Line I C Clock Module Ground Wake up the module from standby mode or reset the module +3.3V Power Supply +1.8V or +3.3V for host IO reference voltage Module Ground Revision 1.0 June 2014 SM-MSN09-C01 Datasheet 4.2 I2C Address SM-MSN09-C01 I2C 7bit address is defined to 0x28. To write data, this module is addressed using 0x50, to read data, this module is addressed using 0x51. Table 2 I2C Address I2C address (R/W=0, write) I2C address (R/W=1, read) 0x50 0x51 4.3 Temperature Maximum Ratings Thermal specifications for this module have been modeled using a two-layer test board. Table 3 Temperature Maximum Ratings Value Symbol Definition Units Operating Temperature Storage TS Temperature Min Max -20 80 ℃ -40 100 ℃ 4.4 DC Electrical Parameters DC Electrical specifications for this module have been modeled using a two-layer test board. Table 4 DC Electrical Specification Value Symbol VBAT IVBAT - 14 - Units Definition Power Supply DC Current Revision 1.0 June 2014 Min Typ Max 3.1 3.3 5.5 Volts 170 mA SM-MSN09-C01 Datasheet 4.5 Antenna Specifications Antenna specifications for this module have been modeled using a two-layer test board. Table 5 Antenna Specifications Value Item DC Resistance AC Impedance Frequency Q factor Antenna Type Size Min Typ Max 0.5 Unit Note Ω Ω 50 13.06 13.56 14.06 25 30 35 VSWR <2 MHz Add the Ferrite sheet FPC Loop Coil Normal: (40 ±0.5) X (50±0.5) mm 4.6 Power Consumption Table 6 Current Consumption Symbol Parameter IHPD Hard power down current ISTBY Standby state current IACT Min Typ Max Unit 10.5 12 μA VBAT=3.6V 20 μA Active state current VBAT=3.6V mA ITVDD Transmitter supply current VBAT=3.1V 30 100 mA IPMUVCC PMUVCC supply Class B 1.5 μA Class C μA - 15 - Revision 1.0 June 2014 Conditions VBAT=3.6V, VEN=0V SM-MSN09-C01 Datasheet 4.7 Thermal Protection Table 7 Thermal Protection Symbol Parameter Conditions Temperature TOVERTEMP protection trigger Min Typ Max 120 125 130 Unit 4.8 System power modes Table 8 System Power Modes Description Mode Full power mode Low-power mode Powered by the Field Power Off mode - 16 - Description The battery supply (VBAT) as well as the pad supply (VDD_IO) is available, all use cases can be executed The pad supply (VDD_IO) is not available. Only the Card Emulation mode use cases via SWP are allowed The battery supply (VBAT) and pad supply (VDD_IO) are not available. The system is powered via PbF interface. Only Card Emulation use cases via SWP are allowed. The system is not supplied from any source or the system is kept Hard Power Down (HPD) Revision 1.0 June 2014 SM-MSN09-C01 Datasheet Table 9 Power Mode Configuration VBAT VDD_IO VEN Power mode Off Off Power Off mode On Off Power Off mode On Off On Low Power Mode On On On Full power mode Note: X: Don’t care 4.9 Reset and download concept To enter reset there are 2 ways: Pulling VEN low (Hard Power Down state) If VBAT monitor is enabled: lowering VBAT below the monitor threshold (monitor mode, if VEN is kept above 1.1 V)This reset mode can be left if PbF is enabled when the field is high enough (RF field detected) to enter PbF mode. To get out of reset, there are 2 ways: Pulling VEN high with VBAT above VBAT monitor threshold if enabled Entering a field strong enough to power the IC Figure 5 Reset via VEN pin Table 10 Reset Timing Symbol tRESETVEN tBOOT - 17 - Parameter Condition VEN pulse width to reset Boot time Revision 1.0 June 2014 Min Typ Max Unit μs 10 ms SM-MSN09-C01 Datasheet 4.10 NFC Connection Recommendation Figure 6 Connection Recommendation 4.11 Main Board Design Reference Figure 7 Main Board Design W/O UICC Reference - 18 - Revision 1.0 June 2014 SM-MSN09-C01 Datasheet 5 Ordering Information Table 11 Ordering Information Table Order Number Descriptions SM-MSN09-C01 NFC Macaron Module (NXP NPC100) with Integrated Antenna Dimension Module: 40x50x1.5 mm - 19 - Revision 1.0 June 2014 SM-MSN09-C01 Datasheet 6 Reliability Verification Table 12 Reliability Item Table No. Item Low Temperature Storage Test Condition Benchmark Result Qty -40oC IEC60068-2-1 Pass IEC60068-2-78 Pass -20oC IEC60068-2-1 Pass 80oC IEC60068-2-2 Pass IEC60068-2-78 Pass ASTM B368 Pass Compliance Pass Compliance Pass High Temperature 80oC, Humidity: Storage Test 95% Low Temperature Operation Test High Temperature Operation Test High Temperature 65oC, Humidity: Operation Test 95% Salt Test RoHS PH: 3.0 ~ 3.2 ,50℃, 72 hrs, Density: 5%±1% Normal HF Normal - 20 - Revision 1.0 June 2014 SM-MSN09-C01 Datasheet 7 NFC Module Outline The following illustration shows the package drawing for SM-MSN09-C01 module. The drawing contains the detail views, dimensions, tolerances, and notes. Pin 1 Figure 8 Antenna Module Drawing - 21 - Revision 1.0 June 2014 SM-MSN09-C01 Datasheet Figure 9 Module FPC Connection Footprint (Button Contact) Figure 10 FPC Wire Dimension - 22 - Revision 1.0 June 2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : USER Create Date : 2015:01:26 18:03:38+08:00 Modify Date : 2015:02:05 09:52:03+08:00 Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : USER Creator Tool : Microsoft® Word 2010 Metadata Date : 2015:02:05 09:52:03+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:a146f331-8b5e-49d2-9c80-a2afc536729a Instance ID : uuid:106fa298-dd63-4905-bfb9-c20de24d826b Page Count : 22EXIF Metadata provided by EXIF.tools