GIGA TMS UM800L UHF RFID Reader Module User Manual Visio UM800L MENU 20150511 vsd

Download:
Mirror Download [FCC.gov]
Document ID	2815815
Application ID	hXqgkiLqKdq5Mwdxv5En9g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.59kB (557328 bits)
Date Submitted	2015-11-18 00:00:00
Date Available	2015-11-18 00:00:00
Creation Date	2015-05-11 14:25:50
Producing Software	GPL Ghostscript 8.64
Document Lastmod	2015-11-09 16:47:56
Document Title	Visio-UM800L_MENU_20150511.vsd
Document Creator	PDFCreator Version 0.9.8
Document Author:	peter

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate this
equipment. (Example - use only shielded interface cables when connecting to computer or
peripheral devices).
End Product Labeling
This transmitter module is authorized only for use in devices where the antenna may be installed
such that 20 cm may be maintained between the antenna and users. The final end product must be
labeled in visible area with the following: “Contains FCC ID: __ WXAUM800L___”
”
End Product Manual Information
The user manual for end users must include the following information in a prominent location
“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna
used for this transmitter must be installed to provide a separation distance of at least 20cm from all
persons and must not be colocated or operating in conjunction with any other antenna or
transmitter.” This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1) This device may not cause harmful interference and (2) This device
must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or colocation with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID can not be used on the final product. In these circumstances, the
OEM integrator will be responsible for reevaluating the end product (including the transmitter) and
obtaining a separate FCC authorization. This device is intended only for OEM integrators under
the following conditions: The antenna must be installed such that 20 cm is maintained between the
antenna and users. As long as a condition above is met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end product for any additional
compliance requirements required with this module installed (for example, digital device emissions,
PC peripheral requirements, etc.).
GIGA-TMS
C2CK
/RST
D-
D+
TXD
RXD
PIO8
34
VDD
PIO7
33
GND
PIO6
10
32
GND
31
ANT
30
GND
13
29
GND
14
28
GND
PIO1
15
27
GND
PIO0
16
26
GND
VRF
17
25
GND
19
20
21
22
23
24
GND
GND
PIO2
PIO12
PIO3
UM800L
PIO13
12
PIO9
11
PIO10
PIO5
PIO4
18
Access Control System
Security System
RFID Printer
Mobile Phone
Point of Sale
Patrol System
Portable Battery Device
Top View
APPLICATIONS
PIN DIAGRAMS
Low cost ,Small Outline 30x20x3.6mm
Compliant with EPCglobal Class1 Gen2
(ISO18000-6C)
Operating Frequency 840 ~ 960 MHz
Adjustable Transmit Output Power from +10
to +27dBm
Operate voltage range 2.7~5.0 V
Low power consumption: 50mA@ standby,
380mA @27dBm Output
USB HID or UART TTL Interface
14 GPIO for Customize Application
No RF Connect and Cable request
Support In-System Programmable and Self
Firmware Update
Provides Development Kit - UM800LDK
PIN #1
IDENTIFY
C2D
FEATURES
Embedded UHF RFID Read/Write Module
PIO11
PROMAG
UM800L
34-PIN SMD
DESCRIPTION
UM800L is a compact and practical embedded UHF reader module which compliant with EPC
Global Class1 Gen2.
With small dimensions (30x20x3.6mm) and low power consumption ( 380mA, 27dBm for output)
make UM800L an ECO friendly choice for your system.
With adjustable frequency (840~960 Mhz), adjustable transmit output (10 to 27dBm), optional
interface (USB or UART TTL) and 14 GPIO enable you the flexibility for various applications under
different environments.
UHF is one of the best solutions for middle and long range RFID applications.
Such as access control, parking, logistic and vehicle tracking etc.
Using UM800L, you can extend the wonderful experience to portable or mobile devices.
GIGA-TMS makes what you need and customizes what you want.
Copyright 2012 by GIGA-TMS Corporation.
HTTP://WWW.GIGATMS.COM.TW
Preliminary
UM800L
PIN FUNCTIONS
Pin1
GIGATEK
made in Taiwan
MODEL NO.:UM800L
PART NO.:UM800L-00
FCC ID : WXAUM800L
MFG. NO.:REV.X
XXXX XXX XXXX
Top View
PIN
PIN
NAME
I/O
10
11
12
13
14
15
16
17
18
19
20
21
22
23~30
31
32~33
RXD
TXD
D+
D/RST
C2CK
C2D
PIO8
PIO7
PIO6
PIO5
PIO4
PIO3
PIO2
PIO1
PIO0
VRF
PIO11
PIO10
PIO9
PIO13
PIO12
GND
ANT
GND
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
34
VDD
Bottom View
FUNCTION DESCRIPTION
UART asynchronous input.
UART asynchronous transmit.
USB Differential Plus Line ( Option )
USB Differential Minus Line ( Option )
Reset Pin
ISP
ISP
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
PA Power Supply Input 3.0~5.0v +/- 5% ( 5V Full power for 27dBm )
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
GPIO , 5 V tolerant with high sink current
Power Ground
Connect To Antenna
Power Ground
2.7V~3.6V power supply (For optimal power supply rejection and performance a supply
voltage of at least 3.3V is required.)
[ Note 1 ] I : Input , O : Output , I/O : Input or Output , P : Power , A : Antenna
Copyright 2012 by GIGA-TMS Corporation.
HTTP://WWW.GIGATMS.COM.TW
Preliminary
UM800L
APPLICATION CIRCUIT
VDD
GND
RXD
Vin
*Note1
TXD
UART TTL
GND
D+
D-
Vbus
USB
GND
C2CK
C2D
/RST
VDD
ISP
*Note1
VRF
VRF
RXD 1
D+ 3
TXD 2
9 PIO7
GND 33
10 PIO6
GND 32
11 PIO5
ANT 31
12 PIO4
GND 30
UM800L
Antenna
50 ohm RF track
GND 29
PIO10
PIO9
GND
GND
GND
GND
GND 25
PIO11
17 VRF
24
VRF
23
*Note1
GND 26
22
GND 27
16 PIO0
21
GND 28
15 PIO1
20
14 PIO2
19
Lp
D- 4
VDD 34
18
VRF
/RST 5
C2D 7
8 PIO8
13 PIO3
*Note1
C2CK 6
*Note 2
VDD
LowDropout
Regulator
VDD
[ Note ]
1. VRF = 3.0~5.0V +/- 5% (5.0V Full Power Output)
2. VDD = 2.7~3.6V +/- 5%
Copyright 2012 by GIGA-TMS Corporation.
HTTP://WWW.GIGATMS.COM.TW
Preliminary
UM800L
SPECIFICATIONS
POWER REQUIREMENTS
3.0V ~ 5.0V regulated for VRF. A linear regulator is recommended.
2.7V ~ 3.6V regulated for VDD.
CURRENT CONSUMPTION
380 mA @ 27dBm RF Power Output
RFID PROTOCOL SUPPORT
SUPPORT EPC DRM
FREQUENCY
DEMODULATION
DATA ENCODING
BIT RATE
TX OUTPUT POWER
ANTENNA TYPE
EPC Class 1 Gen 2, ISO18000-6C
Yes
840 ~ 960MHz
PRASK
FM0 or Miller code
Supports uplink data rate of 40,160,320 Kbps
10 ~ 27 dBm
Mono-static
HOST INTERFACE
UART ( Default : 115200 Baud rate ) Programmable
USB HID
INPUT / OUTPUT PIN
Programmable 12 Input / Output Pin by Customer
CONFIGURE INTERFACE
DIMENSIONS
WEIGHT
UART , 115200 bps, 8N1
30 x 20 x 3.6 mm
< 10 gm
ENVIRONMENT
Operating Temp : -0℃ ~ +60℃
Humidity : 10 ~ 90 % Non-condensing
PACKAGE DESCRIPTION
34-Pin SMD Package
Dimensions in Millimeters
2.54
T=0.8
25
PIN1
Top View
20
18
30
Copyright 2012 by GIGA-TMS Corporation.
HTTP://WWW.GIGATMS.COM.TW
3.2
Preliminary
UM800L
Package Drawings and Markings
GIGATEK
made in Taiwan
MODEL NO.:UM800L
PART NO.:UM800L-00
FCC ID : WXAUM800L
MFG. NO.:REV.X
XXXX XXX XXXX
Example Board Layout
UM800
Copyright 2012 by GIGA-TMS Corporation.
HTTP://WWW.GIGATMS.COM.TW
Preliminary
UM800L
Reflow Profile
Copyright 2012 by GIGA-TMS Corporation.
HTTP://WWW.GIGATMS.COM.TW
Preliminary

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : peter
Create Date                     : 2015:05:11 14:25:50+08:00
Modify Date                     : 2015:11:09 16:47:56+08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : GPL Ghostscript 8.64
Keywords                        : 
Creator Tool                    : PDFCreator Version 0.9.8
Metadata Date                   : 2015:11:09 16:47:56+08:00
Document ID                     : 179f6427-fa02-11e4-0000-df894cfdff38
Instance ID                     : uuid:504f1d6f-9d55-4c66-904a-a0ed083dd90f
Format                          : application/pdf
Title                           : Visio-UM800L_MENU_20150511.vsd
Creator                         : peter
Description                     : 
Description (x-repair)          : 
Page Count                      : 8

EXIF Metadata provided by EXIF.tools