GN Audio USA H710 Bluetooth Headset User Manual H710 QSG Front

GN Netcom Inc Bluetooth Headset H710 QSG Front

User Manual

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2007.Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 680xxxxAxx-OBluetooth ID: xxxxxxxVolumeButtonsBoomMulti-ColorIndicator LightCall ButtonMicrophoneSpeaker(on reverseside)Indicator Light(steadily bluefor pairing mode)BEFORE YOU BEGINBefore using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.Take a moment before you get started to familiarize yourself with your newH710 Headset.1Charge your headset's battery for 2 hours:Plug the Motorola charger into the end of the headset.The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns green.Disconnect the charger.12CHARGE YOUR HEADSETNote: Headset is not functional while charging.2START BLUETOOTH FEATUREYour PhonePress (Menu) > Settings > Connection > Bluetooth Link > Setup.Scroll to Power.Select Change.Scroll to On.Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.12345Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.For most Motorola phones (at the main menu):M3PAIRYour Headset and PhoneBefore you can use your headset, you must pair (link) it with your phone.Step A - ENSURE HEADSET IS IN PAIRING MODEPower on headset by opening the headset boom to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.If the headset does not enter pairing mode, see TROUBLESHOOTING for help.Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET34512For most Motorola phones:On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds.Select Motorola H710.Select OK or Yes to pair your headset with your phone.Enter the passkey: 0000Select OK.When your headset successfully pairs with your phone, the indicator light flashes purple and blue.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.MYour phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:TEST AND USEPlace the headset over your ear.On the phone, dial the number you want to call and press SEND key on your phone.If your phone and headset are successfully paired, you will hear ringing on the headset.4123After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.To save battery power, turn OFF the headset when you don't use it for an extended time by closing the boom.USING YOUR H710SeeFeatures and Functions Guideon the reverse side for information onusing your H710TROUBLESHOOTINGMy headset will not enter pairing mode.Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then close and reopen the headset boom. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. My phone doesn't find my headset.Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step ).My headset worked before but now it's not working.Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step ). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step ) and pair your phone and headset again (see step ).Support.If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com//BluetoothsupportUSING A SECOND PHONE?Your headset allows a simultaneous, multipoint connection to two Bluetooth phones.To pair a second phone to your headset, follow these steps:Turn off any phones already paired with your headset.Turn off your headset by closing the headset boom.Perform Step 2 (“Start Bluetooth Feature”), Step 3 (”Pair”), and Step 4 (”Test and Use”) to pair your headset with your second phone.To connect to both phones, turn on first phone.Close the headset boom and then re-open it. The headset automatically connects to both phones.1234PAIR CONTINUEDYour Headset and PhoneUse the following tips when operating the headset while connected to two phones:The most recently paired device connected to the headset is labeled the primary phone (the other phone is labeled the Secondary phone).Incoming calls can be answered from both phones. When answering a call, the idle phone is disconnected from the headset. When the call ends, connection to idle phone is automatically reestablished. Voice dial calls can be made from either phone. Use different key actions to select which phone to make a voice dial call (see “Making Calls” for details). Redialing a last call dials the number on the phone with the last outgoing call. ●●●●TIPS FOR USING HEADSETWITH TWO PHONES53 322DRAFTDRAFT
Multi-ColorIndicator Light VolumeButtonsCall ButtonIMPORTANT: Be sure to first follow theQuick Start Guideon the reverse side of this guideto complete initial setup of your H710.Features and Functions GuideTURNING HEADSETON AND OFFTo turn your headset on, open the headset boom. The indicator light flashes blue (if connected with a device) or is steadilly lit (if ready to be paired).To turn your headset off, close the headset boom. The indicator light will turn off.WEARING THE HEADSETOpen the headset boom, then open the earhook.Loop the earhook over your ear. Press the headset to your ear.Point the headset boom towards your mouth.1234CHANGING VOLUME BUTTON ORIENTATIONYou can also change the orientation of the volume buttons on your headset. Turn the headset power off.Press and hold down the desired "volume up" button and open the boom. Keep the button held down until the indicator light flashes blue three times.12• The essential requirements and other relevant provisions of Directive 1999/5/EC.• All other relevant EU Directives.European Union Directives Conformance Statement ProductApprovalNumberThe above gives an example of a typical Product Approval Number.You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.Hereby, Motorola declares that this product is in compliance with:MAKING CALLSNote: Your H710 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.Function ActionMake a voice dial call Tap the Call button(Primary phone) and speak the name after the toneMake a voice dial call Tap the Call button(Secondary phone) and either Voume button and speak the name after the toneEnd a call Tap the Call button Answer a call Open headset boom or tap the Call button (if boom is already open)Ignore a call Press and hold the Call button until you hear a beepMAKING CALLS CONTINUED Function ActionRedial last call Press and hold the Call button until you hear a beepAnswer a second Press and hold the incoming call Call button (places first call on hold)Reject second incoming Press and hold eithercall Volume button until you hear a beepTransfer a call from the Press both Volume headset to the phone buttons and Call buttonDisable the Press and holdindicator light both Volume buttons while powering on headsetMute or unmute a call Tap both Volume buttonsNote: Some features are phone/network dependent.CHANGING FOR USEON OTHER EAROpen the headset boom, then open the earhook (90° from the headset).Gently lift and pull thetop of the earhook upand off the upper hingepin. Then, pull it away to remove it.Flip the headset over.Hook the bottom of the earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.1234You can wear your H710 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:1Open Earhook2Pull Earhook UpHinge PinINDICATOR LIGHTWith the Charger Plugged InHeadset Indicator Headset StatusRed Charging (battery level less than 80% charge)Yellow Charging (battery level more than 80% charge)Green Charging completeWhen Checking Battery LevelHeadset Indicator Headset StatusRed Battery at less than 10% chargeYellow Battery between 10% and 80% chargeGreen Battery at more than 80% chargeWith No Charger Plugged InHeadset Indicator Headset StatusOff Power offThree blue flashes Powering on/offSteady blue Pairing modeRapid blue/purple flashes Pairing successfulQuick blue flash Incoming/outgoing callSlow blue pulse Connected (on a call)Slow blue flash Standby (not on a call)Slow red flash Idle (not connected to phone)Slow purple pulse Connected call mutedQuick red flash Low batteryNote: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. INDICATOR LIGHT AUDIO TONESCHECKING BATTERY LEVELWhile turned on and not on a call, you can check your headset’s battery charge level by pressing and holding both Volume buttons. The indicator light displays charge status until you release the buttons. See “Indicator Light” for details on indicator light and charge status.DRAFTDRAFT

Navigation menu