GN Audio USA H710 Bluetooth Headset User Manual H710 QSG Front

Download:
Mirror Download [FCC.gov]
Document ID	837089
Application ID	KwvZj6Mf3RuqKe5wAo93wg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	153.44kB (1917970 bits)
Date Submitted	2007-08-31 00:00:00
Date Available	2007-08-31 00:00:00
Creation Date	2007-06-12 21:47:29
Producing Software	Adobe PDF library 7.77
Document Lastmod	2007-07-20 10:54:35
Document Title	H710_QSG_Front
Document Creator	Adobe Illustrator CS2

BEFORE YOU
BEGIN
CHARGE YOUR
HEADSET
Multi-Color
Indicator Light
Charge your headset's battery for 2 hours:
Speaker
(on reverse
side)
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
1 Press M (Menu ) > Settings > Connection >
Bluetooth Link > Setup.
Boom
Microphone
Call
Button
1 Plug the Motorola charger into the end of
the headset.
The indicator light turns red when the
battery is charging. It may take up to 1
minute for the indicator light to turn on.
When the headset's battery is fully charged
(about 2 hours), the indicator light turns
green.
2 Scroll to Power.
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 680xxxxAxx-O
Bluetooth ID: xxxxxxx
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2007.
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls. To confirm they
are operating properly, make a call:
1 Place the headset over your ear.
PAIR
On the phone, dial the number you want to
call and press SEND key on your phone.
3 If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you don't need to repeat these
steps. For daily use, ensure that your headset is
turned ON and that your phone's Bluetooth
feature is ON.
To save battery power, turn OFF the headset
when you don't use it for an extended time by
closing the boom.
Your Headset and Phone
4 Scroll to On.
5 Press Select to turn on the Bluetooth
Your headset allows a simultaneous, multipoint
connection to two Bluetooth phones.
To pair a second phone to your headset, follow
these steps:
1 Turn off any phones already paired with your
headset.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
TIPS FOR USING HEADSET
WITH TWO PHONES
Use the following tips when operating the
headset while connected to two phones:
●
2 Turn off your headset by closing the headset
boom.
●
3 Perform Step 2 (“Start Bluetooth Feature”),
Step 3 (”Pair”), and Step 4 (”Test and Use”)
to pair your headset with your second
phone.
4 To connect to both phones, turn on first
●
phone.
5 Close the headset boom and then re-open
it. The headset automatically connects to
both phones.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Power on headset by opening the headset
boom to initiate easy pairing. After a few
moments, the indicator light will be steadily lit
in blue to indicate headset is in pairing mode.
Indicator Light
(steadily blue
for pairing mode)
feature. The Bluetooth feature remains on
until you turn the feature off.
2 Disconnect the charger.
USING A SECOND PHONE?
Before you can use your headset, you must pair
(link) it with your phone.
3 Select Change.
Note: Headset is not functional while charging.
Your Phone
Take a moment before you get started to
familiarize yourself with your new
H710 Headset.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
START BLUETOOTH
FEATURE
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
Volume
Buttons
●
The most recently paired device connected
to the headset is labeled the primary phone
(the other phone is labeled the Secondary
phone).
Incoming calls can be answered from both
phones. When answering a call, the idle
phone is disconnected from the headset.
When the call ends, connection to idle phone
is automatically reestablished.
Voice dial calls can be made from either
phone. Use different key actions to select
which phone to make a voice dial call (see
“Making Calls” for details).
Redialing a last call dials the number on the
phone with the last outgoing call.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
USING YOUR H710
See
Features and
Functions Guide
on the reverse side
for information on
using your H710
PAIR
CONTINUED
Your Headset and Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
1 On your Motorola phone, press M (Menu ) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2 Select Motorola H710.
3 Select OK or Yes to pair your headset with
your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs with
your phone, the indicator light flashes purple
and blue.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired with
the headset are turned off. If the indicator light is
flashing in blue, first turn off the other device,
then close and reopen the headset boom. The
indicator light becomes steadily lit in blue
indicating the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3 ).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2 ).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2 ) and
pair your phone and headset again (see step 3 ).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com//Bluetoothsupport
Features and
Functions Guide
TURNING HEADSET
ON AND OFF
WEARING THE HEADSET
CHANGING FOR USE
ON OTHER EAR
1 Open the headset boom, then open the
CHANGING VOLUME
BUTTON ORIENTATION
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H710.
European Union Directives
Conformance Statement
Hereby, Motorola declares that this
product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
2 Loop the earhook over your ear.
You can wear your H710 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
3 Press the headset to your ear.
To turn your headset off, close the
headset boom. The indicator light will turn
off.
1 Open the headset boom,
4 Point the headset boom towards your
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
mouth.
then open the earhook
(90° from the headset).
Multi-Color
Indicator Light
3 Flip the headset over.
1 Open Earhook
2 Pull Earhook
Up
earhook onto the lower
hinge pin, then lift and
pull the top of the
earhook over the upper
hinge pin.
Function
MAKING CALLS CONTINUED
Action
Function
Action
Make a voice dial call
(Primary phone)
Tap the Call button
and speak the
name after the tone
Redial last call
Press and hold the
Call button until you
hear a beep
Make a voice dial call
(Secondary phone)
Tap the Call button
and either Voume
button and speak the
name after the tone
Answer a second
incoming call
Press and hold the
Call button (places
first call on hold)
End a call
Tap the Call button
Reject second incoming
call
Answer a call
Open headset boom
or tap the Call button
(if boom is already
open)
Press and hold either
Volume button until
you hear a beep
Transfer a call from the
headset to the phone
Press both Volume
buttons and Call
button
Disable the
indicator light
Press and hold
both Volume
buttons while
powering on headset
Ignore a call
Press and hold the
Call button until you
hear a beep
Note: Your H710 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Mute or unmute a call
Tap both Volume
buttons
Note: Some features are phone/network dependent.
INDICATOR LIGHT
When Checking Battery Level
Yellow
Green
While turned on and not on a call, you can
check your headset’s battery charge level
by pressing and holding both Volume
buttons.
The indicator light displays charge status
until you release the buttons. See “Indicator
Light” for details on indicator light and
charge status.
Call
Button
Volume
Buttons
Hinge
Pin
With the Charger Plugged In
Headset Indicator
Headset Status
Red
Charging (battery
level less than 80%
charge)
Yellow
Charging (battery
level more than 80%
charge)
Green
Charging complete
Headset Indicator
Red
1 Turn the headset power off.
"volume up" button and open the boom.
Keep the button held down until the
indicator light flashes blue three times.
4 Hook the bottom of the
MAKING CALLS
You can also change the orientation of the
volume buttons on your headset.
2 Press and hold down the desired
2 Gently lift and pull the
top of the earhook up
and off the upper hinge
pin. Then, pull it away to
remove it.
• All other relevant EU Directives.
Product
Approval
Number
earhook.
To turn your headset on, open the headset
boom. The indicator light flashes blue (if
connected with a device) or is steadilly lit (if
ready to be paired).
CHECKING
BATTERY LEVEL
Headset Status
Battery at less than
10% charge
Battery between
10% and 80% charge
Battery at more than
80% charge
INDICATOR LIGHT
With No Charger Plugged In
Headset Indicator
Off
Three blue flashes
Steady blue
Rapid blue/purple flashes
Quick blue flash
Slow blue pulse
Slow blue flash
Slow red flash
Slow purple pulse
Quick red flash
Headset Status
Power off
Powering on/off
Pairing mode
Pairing successful
Incoming/outgoing call
Connected (on a call)
Standby (not on a call)
Idle (not connected
to phone)
Connected call muted
Low battery
Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
AUDIO TONES

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Title                           : H710_QSG_Front
Creator Tool                    : Adobe Illustrator CS2
Create Date                     : 2007:06:12 21:47:29-05:00
Modify Date                     : 2007:07:20 10:54:35+02:00
Metadata Date                   : 2007:07:20 10:54:35+02:00
Thumbnail Width                 : 256
Thumbnail Height                : 132
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 17289 bytes, use -b option to extract)
Document ID                     : uuid:A310740A5719DC118FB2846AC4ADEC5B
Instance ID                     : uuid:68c59d65-2b12-4935-bca5-a4418c567c45
Derived From Instance ID        : uuid:A210740A5719DC118FB2846AC4ADEC5B
Derived From Document ID        : uuid:8A5E31809FFFDA11A7BED503AC3CFE7D
Producer                        : Adobe PDF library 7.77
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 12.0
For                             : Rick Lazier, Harbor Light Communications
Bounding Box                    : -55 -354 1313 351
Container Version               : 9
Creator Version                 : 12

EXIF Metadata provided by EXIF.tools