GN Hearing A S SAS-3 Accessory to wireless hearing instrument User Manual 15 SAS 3 UserMan1 E

Download:
Mirror Download [FCC.gov]
Document ID	2016383
Application ID	bARWeyiINQWWVnX3EQ8TJg==
Document Description	15_SAS-3 UserMan1 E
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	92.56kB (1157056 bits)
Date Submitted	2013-07-15 00:00:00
Date Available	2013-08-02 00:00:00
Creation Date	2013-06-06 13:13:04
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2013-07-10 09:27:17
Document Title	15_SAS-3 UserMan1 E
Document Creator	Adobe InDesign CS6 (Windows)

user guide
400248000-GB-13.05-Rev.A.indd 1
TV Streamer 2
06-06-2013 13:13:06
Welcome
Congratulations on your purchase of a ReSound UniteTM TV
Streamer 2.
TV Streamer 2 will provide you with high quality streamed audio
from your TV, HiFi stereo, personal computer or similar device
directly to your hearing instruments.
Please read this manual carefully to fully benefit from the
TV Streamer 2. Ask your hearing care professional if you have
any questions.
For further information you can also visit the
www.resound.com/unite web site.
For your safety, carefully read the chapter Important Information,
on pages 28-29
Model: SAS-3
FCC ID: X26SAS-3
400248000-GB-13.05-Rev.A.indd 2
06-06-2013 13:13:06
Statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
400248000-GB-13.05-Rev.A.indd 3
06-06-2013 13:13:07
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications can void the user’s authority to operate
the equipment.
Intended use
TV Streamer 2 is intended to enable ReSound wireless hearing
instrument users to better follow TV or other audio programs. The
essential performance of the TV Streamer 2 is to transfer signals
from a TV set or other audio device to a ReSound wireless hearing instrument.
List of countries
Products are intended for sale in countries within European Economic Area as well as Switzerland.
400248000-GB-13.05-Rev.A.indd 4
06-06-2013 13:13:07
National restrictions:
Norway: You are not allowed to operate the equipment within 20
km of the centre of Ny Ålesund.
This product is in compliance with the following regulatory standards:
In EU : The device conforms to the Essential Requirements according to - Annex I of Council Directive 93/42/EE C for medical
devices (MDD) and essential requirements and other relevant provisions of Directive 1999/5/EC (R&TTE). The declaration of conformity may be consulted at www.resound.com
In US: FCC CFR 47 Part 15, subpart C.
Other identified applicable international regulatory requirements
in countries outside EU and US. Please refer to local country requirements
EN
300 328.for these areas.
The product
Model:
SAS-3is categorized as receiver category 2 according to
IC: 6941C-SAS3
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
400248000-GB-13.05-Rev.A.indd 5
06-06-2013 13:13:07
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device.
L’exploitation est autorisée aux deux conditions suivantes: (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur
de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
In JP:
This device has been granted a designation number by Ministry of
Internal Affairs and Communications under “Ordinance concerning Technical Regulations Conformity Certification etc. of Specified Radio Equipment (特定無線設備の技術基準適合証明 等に
関する規則)” Article 2-1-19 “This device should not be modified
(otherwise the granted designation number will be invalid)“.
400248000-GB-13.05-Rev.A.indd 6
06-06-2013 13:13:07
Contents
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Getting Started  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Pairing to your hearing instruments . . . . . . . . . . . . . . . . . . . .  18
Start and stop streaming . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24
Adjustable delay mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Important Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
400248000-GB-13.05-Rev.A.indd 7
06-06-2013 13:13:07
Description
Micro-USB power socket
Pairing button
Mono/stereo switch
Analogue mini-jack audio input
Optical (Toslink) audio input
Coaxial audio input
400248000-GB-13.05-Rev.A.indd 8
6 1
4 5
06-06-2013 13:13:07
7
Increase volume
Decrease volume
Power light (green)
11
10 Activity light (yellow)
11 Wall plug
12 Mini-USB plug
12
400248000-GB-13.05-Rev.A.indd 9
10
06-06-2013 13:13:08
Getting Started
Installing the TV Streamer 2
Depending on your TV, HiFi stereo, computer or other audio
setup, the installation of TV Streamer 2 may be done in several
ways described in the following section. The following steps will
guide you through the pairing and connecting process, which can
be easily accomplished by almost anyone. Start by connecting
cables between the TV Streamer 2 and the audio source and
finish by pairing the TV Streamer 2 to your hearing instruments.
The TV Streamer 2 supports both analogue and digital audio input. Please read the following sections for information about
supported audio formats and how to connect the TV Streamer 2
to audio sources.
Connecting the TV Streamer 2 to an analogue audio source
(E.g. TV or HiFi stereo)
1. Connect the power supply to the wall socket and insert the
cable into the micro-USB socket on the TV Streamer 2
2. Insert the male stereo mini-jack on the audio cable into the female stereo mini-jack input on the TV Streamer 2 (4 on page 8)
3. Plug the other end audio cord into the ”AUDIO OUT” terminals
on the audio source
10
400248000-GB-13.05-Rev.A.indd 10
06-06-2013 13:13:09
4. The ”AUDIO OUT” is usually marked ”L – R” for left and right,
and can usually be found on the back of the audio source
Note: With this installation, most audio sources will send
sound to both hearing instruments and additional speakers
connected to the audio source simultaneously. On some audio
sources you can adjust the balance between the AUDIO OUT and
the speakers – consult your audio source manual for instructions.
400248000-GB-13.05-Rev.A.indd 11
11
06-06-2013 13:13:09
Alternative analogue audio cable installations:
If it is not possible to connect the TV Streamer 2 to the AUDIO
OUTPUT of the audio source using the red and white plugs, the
following installation alternatives can be used:
Mini-jack adaptor:
1. Connect the power supply to the wall socket and insert the
cable into the micro-USB socket on TV Streamer 2
2. Insert the male stereo mini-jack on the audio cable into the female stereo mini-jack input on the TV Streamer 2 (4 on page 8)
3. Connect the stereo mini-jack adapter to the red and white
plugs at the other end of the audio cable
4. Plug the stereo mini-jack adapter into the audio sources’
”HEADPHONE” output terminal, or alternatively into your computers’ audio terminal
Note: The HEADPHONE output terminal is usually located
on the side or front of the audio source. When using the HEADPHONE terminal, usually only the person wearing the hearing instruments will hear the sound, and audio source speakers are
muted.
12
400248000-GB-13.05-Rev.A.indd 12
06-06-2013 13:13:10
If muted speakers are not desired, please refer to the first installation, or the one on the following page. Your audio source may
support speakers and HEADPHONE being on simultaneously;
check your audio source manual for instructions.
400248000-GB-13.05-Rev.A.indd 13
13
06-06-2013 13:13:10
Scart adapter:
1. Connect the power supply to the wall socket and insert the
cable into the micro-USB socket on TV Streamer 2
2. Insert the male stereo mini-jack on the audio cable into the female stereo mini-jack input on the TV Streamer 2 (4 on page 8)
3. Connect the scart adapter to the red and white plugs at the
other end of the audio cable
4. Plug the scart adapter into the audio source’s scart terminal
Note: The scart output terminal is usually located on the
back or side of the audio source.
Please consult the manual of your
audio source if additional configuration of the scart output is needed.
14
400248000-GB-13.05-Rev.A.indd 14
06-06-2013 13:13:11
Connecting the TV Streamer 2 to a digital audio source (E.g.
TV or HiFi stereo)
The TV Streamer 2 supports both analogue and digital audio input. When using digital audio input the following formats are
supported:
Stereo PCM
- Sample rate: Up to 192 kHz
- Sample resolution: Up to 32 bit
Dolby Digital
- Channels: Max 5.1
- Bitrate: 32 kbs to 640 kbs
- Sample rate: 32, 44.1 and 48 kHz
Note: Dolby Digital Plus (requiring an HDMI interface), Dolby TrueHD, Dolby Pro Logic, Dolby Digital EX, Dolby Digital Surround EX,
and AAC (Advanced Audio Codec) are not supported.
400248000-GB-13.05-Rev.A.indd 15
15
06-06-2013 13:13:12
Using the optical (Toslink) audio input
1. Connect the power supply to the wall socket and insert the
cable into the micro-USB socket on TV Streamer 2
2. Insert one of the plugs on the optical audio cable into the optical audio input socket (5 on page 8) on TV Streamer 2
Note: Most optical cables are delivered with a small protective
cap to protect the tip of the cable. Please remove this protective cap before inserting the cable
3. Plug the other end of the optical audio cable into the “Digital
Audio Out/Optical” on your audio source
16
400248000-GB-13.05-Rev.A.indd 16
06-06-2013 13:13:12
Using the coaxial audio input
1. Connect the power supply to the wall socket and insert the
cable into the micro-USB socket on TV Streamer 2
2. Connect one of the plugs on the coaxial audio cable to the
coaxial plug (6 on page 8) on TV Streamer 2
3. Plug the other end of the coaxial audio cable into the “Digital
Audio Out/Coaxial” on your audio source
400248000-GB-13.05-Rev.A.indd 17
17
06-06-2013 13:13:13
Pairing to your hearing instruments
Note! The following information is intended primarily for your
hearing care professional, who in most cases will complete the
necessary tasks before the TV Streamer 2 can be used with your
hearing instruments. However, the process is designed to be
simple and most people can do it themselves.
It is possible to pair up to three streaming devices - e.g. two TV
Streamers and one ReSound UniteTM Mini Microphone (optional
accessory) - with a given pair of hearing instruments. Therefore
channel 1, 2 or 3 must be selected when starting the pairing process.
Pairing the TV Streamer 2 in channel 1
1. Make sure that the TV Streamer 2 power supply is plugged into
a wall socket and that the green light indicator on the front of the
TV Streamer 2 (9 on page 9) is ON. Your hearing instruments
must be OFF - open the battery door
2. Press the pairing button on the TV Streamer 2 (2 on page 8)
once. The yellow light indicator on the front of the TV Streamer 2
(10 on page 9) will now blink once every 2 seconds to indicate
that the TV Streamer 2 is ready to be paired in channel 1. Your
18
400248000-GB-13.05-Rev.A.indd 18
06-06-2013 13:13:13
TV Streamer 2 will remain in pairing mode for 20 seconds
3. While pairing mode is activated, close the battery doors of
both hearing instruments and make sure they are ON. A successful pairing will be indicated by an audible melody being
played in both hearing instruments. You are now ready to use
the TV Streamer 2
Pairing the TV Streamer 2 in channel 2
1. Press the pairing button twice. The yellow light indicator on the
front of the TV Streamer 2 will now blink twice every 2 seconds
to indicate that it is ready to be paired in channel 2
2. While in pairing mode close the battery doors on the hearing
instruments
Pairing the TV Streamer 2 in channel 3
1. Press the pairing button three times. The yellow light indicator
on the front of the TV Streamer 2 will now blink three times
every 2 seconds to indicate that it is ready to be paired in
channel 3
2. While in pairing mode close the battery doors on the hearing
instruments
400248000-GB-13.05-Rev.A.indd 19
19
06-06-2013 13:13:13
Pairing blinking pattern:
Pairing button
pushes
Light indicator pattern
Channel
20
400248000-GB-13.05-Rev.A.indd 20
06-06-2013 13:13:13
Start and stop streaming
Turn on the TV, HiFi Stereo, computer or other audio device connected to TV Streamer 2. Make sure your hearing instruments are
turned on as well. Streaming may be started in one of two ways.
1. Press and hold the push button on either hearing instrument
for about three seconds. This must be done separately on
both hearing instruments, in order to hear streamed audio in
both ears, unless your hearing instruments have been set up
with device-to-device synchronisation. Once TV Streamer 2
has been connected, an audible melody will play in your hearing instruments and will be followed by the streamed sound
2. If you have a ReSound UniteTM Remote Control (optional),
simply press the streaming button on this Remote Control.
Once the hearing instruments connect to TV Streamer 2, an
audible melody will play in both ears to confirm the presence
of streamed audio and a streaming icon will appear in the display. The streamed sound can now be heard in your hearing
instruments
Start streaming on a 2nd or 3rd TV Streamer 2 unit
If more than one TV Streamer 2 device is available, you may press
the streaming button on the Remote Control a 2nd or 3rd time,
depending on which TV Streamer 2 device you want to listen to.
400248000-GB-13.05-Rev.A.indd 21
21
06-06-2013 13:13:13
TV
Home button
Program (P) button
Streaming button
Connected to TV
Up to 3 TV Streamer 2 units are initially labeled by letter designator A, B or C, and the streaming device in use is shown on the
Remote Control display.
If you do not have a Remote Control, press and hold the push
button for about 3 seconds on the hearing instrument a 2nd or
3rd time to access the 2nd or 3rd streaming unit.
22
400248000-GB-13.05-Rev.A.indd 22
06-06-2013 13:13:15
on
button
Stop streaming
Shortly press the push button on either hearing instrument. This
will cancel streaming on the side pressed and return to the last
program used.
Note: If your hearing instruments have device-to-device program
synchronisation, enabled a press on one side will take both hearing instruments back to the last program used.
With the ReSound UniteTM Remote Control (optional) you just have
to press the “P” button, located in the center of the key pad. This
will return the hearing instruments to the last program used. You
may also press the home button to return to your default settings.
If you are using the telephone with ReSound UniteTM Phone Clip+
or PhoneNowTM, streaming from the TV Streamer 2 will be temporarily disrupted. When you have ended your phone call, streaming
will resume.
Note! You may get out of range (>7m) from your TV Streamer 2.
If you get back in range within 5 minutes, your hearing instruments will automatically reconnect and continue streaming.
400248000-GB-13.05-Rev.A.indd 23
23
06-06-2013 13:13:15
Controls
Adjust volume
The TV Streamer 2 is designed to provide a comfortable listening
level from the moment it is activated. However, for some devices
or listening environments it may be desirable to adjust the listening volume, and doing so can be accomplished in a variety of
ways. Keep in mind that volume adjustments on the TV Streamer
2 apply to the streamed signal only, not the volume of normal
environmental sounds.
Use the “+” and “-“ keys (7 and 8 on page 9) to adjust volume to
a comfortable level. Make sure that your hearing instruments are
comfortably adjusted before you change the settings with the volume control. In most cases this adjustment should only be made
one time, as TV Streamer 2 will store the latest set volume level.
Use the ReSound Unite Remote Control 2 (optional) to adjust
both the streaming volume level and the hearing instrument microphone volume level in the hearing instrument*. Ask your hearing care professional for more information about this accessory.
The volume can, in some cases, be further adjusted at the signal
source, for example by turning the TV volume down. This will adjust the volume of the streamed sound transmitted wirelessly to
*Adjustment of both hearing instrument and streaming volume is only
availably with ReSound Unite(TM) Remote Control 2.
24
400248000-GB-13.05-Rev.A.indd 24
06-06-2013 13:13:15
the hearing instruments. Adjusting the TV volume will affect the
listening volume in the room as well.
Mono/stereo control
The two-position switch (3 on page 8) may be used to set Stereo
(two channels) or Mono (one channel) audio streaming. For binaural fittings, the switch should preferably be set to the Stereo position. For monaural fitting it should be set to the Mono position.
400248000-GB-13.05-Rev.A.indd 25
25
06-06-2013 13:13:15
Adjustable delay mode
In rare cases there may be a misalignment between the audio
streamed to the hearing instruments and the sound coming from
the TV speakers (echo) or even a misalignment between the
streamed audio and the TV picture (lip-sync). This may be evident
in more complex audio setups where the TV Streamer 2 is not
connected directly to the TV (e.g. through a set-top box or other
auxiliary unit).
To overcome such misalignments the streaming delay from the
TV Streamer 2 can be adjusted as follows:
1. Make sure that the TV Streamer 2 is turned on and that your
hearing instruments are receiving the streamed audio
2. Press and hold the pairing button (2 on page 8) for 3 seconds.
Now the TV Streamer 2 will enter into the adjustable delay
mode, where the green light indicator on the front of the TV
Streamer 2 will blink once every 2 seconds. The yellow light
indicator will be on whenever an audio signal is present
3. Use the “+” and “-“ key (7 and 8 on page 9) on the top of the TV
Streamer 2 to increase or decrease the delay of the streamed
signal in 10 ms steps. The streamed signal can be delayed in
the range of 0-250 ms
4. When the optimal alignment between the audio streamed to
the hearing instruments and the sound coming from the TV
26
400248000-GB-13.05-Rev.A.indd 26
06-06-2013 13:13:15
speakers or alignment between the streamed audio and the
TV picture has been reached, press and hold the paring button for 3 seconds. Now the TV Streamer 2 will resume normal
operation, indicated by the green light indicator being constantly on
The offset set in adjustable delay mode will be stored in the TV
Streamer 2.
If you do not exit the adjustable delay mode by pressing and holding the pairing button down for 3 seconds, the TV Streamer 2 will
automatically resume normal operation after 30 minutes.
To reset the delay to 0 ms (factory setting), press and hold the
pairing button while simultaneously powering on the TV Streamer
2.
Important Information
Maintenance and Care
Clean the TV Streamer 2 using a damp cloth. Never use household cleaning products (washing powder, soap, etc.) or alcohol to
clean the device.
When the TV Streamer 2 is not being used for longer periods of
time, unplug the power supply from the wall socket.
400248000-GB-13.05-Rev.A.indd 27
27
06-06-2013 13:13:15
i
General warnings
Keep the TV Streamer 2 out of reach of children under 3 years.
The TV Streamer 2 uses low-powered digitally coded transmissions in order to communicate with other wireless devices. Although unlikely, nearby electronic devices may be affected. In that
case, move the TV Streamer 2 away from the affected electronic
device.
Use the TV Streamer 2 only with the power supply unit that has
been supplied together with the product. The use of any other
types may damage or destroy the product and could be dangerous. Use of other power supplies may invalidate any approval or
warranty.
• When you disconnect the power cord, grasp and pull the plug,
not the cord
• Never use a power supply that is damaged
• Do not attempt to disassemble the power supply as it may
expose you to dangerous electric shock
• Do not use the power supply outdoors or in damp areas
When using the TV Streamer 2 and the device is affected by electromagnetic interference, move away from the source.
28
400248000-GB-13.05-Rev.A.indd 28
06-06-2013 13:13:15
i
General precautions
Your hearing instrument and the TV Streamer 2 were given a
unique communication network code during the fitting. This ensures that TV Streamer 2 will not affect hearing instruments worn
by others.
High-powered electronic equipment, larger electronic installations and metallic structures may significantly reduce the operating range.
Use only original ReSound accessories.
Do not make any changes or modifications to the TV Streamer 2.
Opening the TV Streamer 2 might damage it. If problems occur
which cannot be resolved by following the remedy guidelines in
the troubleshooting section of this user guide, consult your hearing care professional.
The TV Streamer 2 may only be repaired by an authorized service
center.
Do not use the TV Streamer 2 in areas where RF transmission is
prohibited, e.g. airplanes etc.
Only connect the TV Streamer 2 to connections for which it is
explicitly intended.
400248000-GB-13.05-Rev.A.indd 29
29
06-06-2013 13:13:15
Technical specifications
Operating range: 		Up to 7 meters
Power supply: 		External wall adapter
Wireless:			2.4 GHz
Operating temperature:
0 to 55 °C
Storage temperature:
-20 to 60 °C
Temperature test, transport and storage information
The product is subject to various tests in temperature and damp
heating cycling between -25 °C and +70 °C according to internal
and industry standards.
Warranty
The TV Streamer 2 is covered by a limited warranty issued by the
manufacturer for a period of 12 months from the day of the original purchase. Please notice that extended warranties may apply
in your country. Please contact your local hearing care professional for more information.
What is covered by this warranty?
Any electrical component, that because of workmanship, manu30
400248000-GB-13.05-Rev.A.indd 30
06-06-2013 13:13:15
facturing or design defects fails to function properly under normal
use during life of this warranty will be replaced or repaired at no
charge for parts or labour when returned to the point of purchase.
If it is determined that repair is not feasible, the entire unit may be
replaced with an equivalent unit upon mutual agreement of the
hearing care professional and the customer.
What is not covered by this warranty?
Problems arising from improper handling or care, excessive use,
accidents, repairs made by an unauthorized party, exposure to
corrosive conditions or damage due to foreign objects entering
the device are NOT covered by the limited warranty and may void
it. The above warranty does not affect any legal rights that you
might have under applicable national legislation governing sale
of consumer products. Your hearing care professional may have
issued a warranty that goes beyond the clauses of this limited
warranty. Please consult your hearing care professional for further information.
Serial number:
Date of purchase:
400248000-GB-13.05-Rev.A.indd 31
31
06-06-2013 13:13:15
TROUBLESHOOTING GUIDE
Symptom
Cause
Possi
The streaming button on the
Remote Control is pressed
but with no effect at all
The TV Streamer 2 and hearing instruments have not been
paired
Carr
The Remote Control and
hearing instruments are not
within wireless range
Ensu
with
The push button on the
The TV Streamer 2 and hearhearing instrument has been ing instrument have not been
pressed for more than 3 sec- paired
onds but with no effect at all
Carr
The TV Streamer 2 and hearing instrument are not within
wireless range
Ensu
with
The TV Streamer 2 and
hearing instrument have not
been simultaneously in pairing
mode
Rep
both
the p
The pairing button on the
TV Streamer 2 is pressed
but no pairing melody is
played in the hearing instrument
32
400248000-GB-13.05-Rev.A.indd 32
06-06-2013 13:13:15
areen
Possible remedy
Carry out pairing process
Ensure that Remote Control and hearing instruments are
within wireless range and activate streaming again
aren
Carry out pairing process
arin
Ensure that the TV Streamer 2 and hearing instruments are
within wireless range, and repeat pairing process
ot
ring
Repeat pairing process and ensure that the battery doors on
both hearing instruments are closed within 20 seconds after
the pairing button has been pressed on the TV Streamer 2
400248000-GB-13.05-Rev.A.indd 33
33
06-06-2013 13:13:15
Symptom
Cause
Po
The streaming button on the
Remote Control is pressed
but no streamed audio signal
is found when searched for
(indicated by an ’X’ icon on the
display)
The TV Streamer 2 and
hearing instruments are not
within wireless range
Ens
with
The TV Streamer 2 is not
cabled correctly to the TV
Con
cor
The TV Streamer 2 is powered off or the sound from
the TV output has been
muted
Pow
stre
The TV Streamer 2 and
hearing instruments are not
within wireless range
Ens
with
The TV might have been
powered off or the sound
from the TV has been
muted
Pow
The audio input level from
the TV is too high
Adj
Stre
There is no sound in the hearing instruments although it is in
the streaming program
The sound from the
TV Streamer 2 is distorted
34
400248000-GB-13.05-Rev.A.indd 34
06-06-2013 13:13:15
Possible remedy
not
Ensure that TV Streamer 2 and hearing instruments are
within wireless range and activate streaming again
Connect the cable between the TV Streamer 2 and the TV
correctly and activate streaming again
wm
Power on the TV Streamer 2 or unmute the TV and activate
streaming again
not
Ensure that the TV Streamer 2 and hearing instruments are
within wireless range
Power on or unmute the TV
Adjust the volume using the volume button on the TV
Streamer 2 until the sound is no longer distorted
400248000-GB-13.05-Rev.A.indd 35
35
06-06-2013 13:13:15
Symptom
Cause
Po
The volume level from the
TV Streamer 2 is very low
The audio input level from
the TV is too low
Adj
Stre
The sound from the
TV Streamer 2 is distorted or
drop-outs occur from time to
time
The TV Streamer 2 and
hearing instruments are on
the edge of the wireless
range
Mo
The TV Streamer 2 and
hearing instruments are not
within sufficient ”line-ofsight”
Ens
pos
sign
Your TV is not able to synchronize the sound from
the selected audio outputs
and the picture
If po
Alte
mo
you
The sound from the
TV Streamer 2 is not synchronized with the TV picture
The
and
36
400248000-GB-13.05-Rev.A.indd 36
06-06-2013 13:13:15
m
Possible remedy
Adjust the volume using the ”+” and ”-” keys on the TV
Streamer 2 until the sound is sufficiently loud
Move a little closer to the TV Streamer 2
on
not
n-
uts
Ensure that the TV Streamer 2 is placed in an adequate
position, and that you are within normal reach without any
significant obstacles obstructing the streaming
If possible, try using another audio output from your TV.
Alternatively, follow the instructions in the “Adjustable delay
mode” section of this user guide. If this does not help, contact
your TV dealer
The TV Streamer 2 audio streaming has almost no latency
and does not contribute itself to any lip sync error
400248000-GB-13.05-Rev.A.indd 37
37
06-06-2013 13:13:16
Symptom
Cause
Po
The sound from the
TV Streamer 2 is not synchronized with the sound from the
TV loudspeakers
Your TV is not able to synchronize the sound from
the selected audio outputs
with the sound from the TV
loudspeakers
If po
Alte
mo
tact
The
and
The sound from the hearing
instruments is either too low or
too high
The audio input level is not
suitable for listening
Adj
Stre
Alte
(opt
A hearing instrument unintentionally drops out of the streaming program
The TV Streamer 2 and
hearing instruments have
been out of wireless range
for more than 5 minutes
Ens
with
The battery in the hearing
instrument is so depleted
that it no longer supports
audio streaming
Rep
38
400248000-GB-13.05-Rev.A.indd 38
06-06-2013 13:13:16
n-
uts
TV
not
ge
Possible remedy
If possible, try using another audio output from your TV.
Alternatively, follow the instructions in the “Adjustable delay
mode” section of this user guide. If this does not help, contact your TV dealer
The TV Streamer 2 audio streaming has almost no latency
and does not contribute itself to any echo effects
Adjust the volume using the ”+” and ”-” keys on the TV
Streamer 2 until the sound is suitable.
Alternatively, use the ”+” and ”-” keys on the Remote Control
(optional) for this operation
Ensure that TV Streamer 2 and hearing instruments are
within wireless range and activate streaming again
Replace the battery in the hearing instrument with a new one
400248000-GB-13.05-Rev.A.indd 39
39
06-06-2013 13:13:16
Notes:
40
400248000-GB-13.05-Rev.A.indd 40
06-06-2013 13:13:16
Notes:
400248000-GB-13.05-Rev.A.indd 41
41
06-06-2013 13:13:16
Be aware of information marked with the warning symbol
WARNING points out a situation that could lead to serious injuries,
CAUTION indicates a situation that could lead to minor
and moderate injuries
Advice and tips on how to handle your ReSound Unite
accessory better.
Equipment includes RF transmitter
Product is a Type B applied part
42
400248000-GB-13.05-Rev.A.indd 42
06-06-2013 13:13:16
i
Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby Laboratories.
Please ask your local hearing care professional concerning disposal of your ReSound Unite accessory
Any issues relating to the EU Medical Device Directive 93/42/EEC
and R&TTE Directive 1999/5/EEC should be directed to GN Hearing A/S, Lautrupbjerg 7, DK 2750 Ballerup, Denmark
400248000-GB-13.05-Rev.A.indd 43
43
06-06-2013 13:13:16
Worldwide Headquarters
ReSound A/S
Lautrupbjerg 7
DK-2750 Ballerup, Denmark
Tel.: +45 45 75 11 11
Fax: +45 45 75 11 19
www.resound.com
New Zealand
GN ReSound (NZ) Ltd.
Ground Floor, North Entrance
4 Fred Thomas Drive
Takapuna
Auckland, 0622
Tel.: (free) 0800 900 126
Fax: (free) 0800 007 695
www.gnresound.co.nz
400248000-GB-13.05-Rev.A
United Kingdom
GN ReSound Ltd.
Kirtlington Business Centre
Portway
Kirtlington
Oxon OX5 3JA
Tel.: +44 1869 352 800
Fax: +44 1869 343 466
www.gnresound.co.uk
Australia
GN ReSound Pty. Ltd.
Unit R1 Regents Park Estate
391 Park Road
Regents Park NSW 2143
Tel.: (free) 1800 658 955
Fax: +61 2 9743 7472
www.gnresound.com.au
400248000-GB-13.05-Rev.A.indd 44
06-06-2013 13:13:17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Instance ID                     : uuid:ec0d0fcf-76c2-4f7b-ab72-1bcb941a08e9
Original Document ID            : adobe:docid:indd:858767c6-5db4-11df-b001-c3668b7485af
Document ID                     : xmp.id:44F8A2FF99CEE211815AA50F47FFE5C4
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:43F8A2FF99CEE211815AA50F47FFE5C4
Derived From Document ID        : xmp.did:CC8751EB7249E011BCEF8753607AFDF9
Derived From Original Document ID: adobe:docid:indd:858767c6-5db4-11df-b001-c3668b7485af
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:06:06 13:13:04+02:00
Create Date                     : 2013:06:06 13:13:04+02:00
Modify Date                     : 2013:07:10 09:27:17+02:00
Metadata Date                   : 2013:07:10 09:27:17+02:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 44
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools