GOLDEN CHINA AUDIO HX-P760 Jam Levity User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2914044
Application ID	Ar6mdRxINOtP5RnsjZcG2w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.89kB (236108 bits)
Date Submitted	2016-02-28 00:00:00
Date Available	2016-02-28 00:00:00
Creation Date	2016-02-19 11:56:15
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2016-02-19 11:56:15
Document Title	Microsoft Word - User Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

AOK UI INTRUCTION for HX-P760
TABLE OF CONTENT
Change history…………………………………………………………………………………………………………………………………………………………………………………2
1.
Product setting…………………………………………………………………………………………………………………………………………………………………………………2
2.
System feedback………………………………………………………………………………………………………………………………………………………………………………4
3.
Product states………………………………………………………….………………………………………………………………………………………………………………………6
Change History
Issue
Date
Handle by
Comments
00
November-4-2015
Mir xie
First release
1. Product setting: buttons, LEDs, Audio sources
2.1 Buttons and switches and Touch, the systems have below buttons:
Power button, MFB, Vol+, Vol- button
Button
2.2 Connection of Power and audio system, the system has the following connection:
Power port
In
DC jack
Out
USB out for charging
2.3 Button press Type and Duration. The following table describes how the buttons react and describes timing constraints
Button pressing time
Press type
Duration(Seconds)
Short press
X<0.5
Long press
2 10%
ii. Low: 5% < X ≤ 10%
‐ Low battery indication available (Red LED
flashing warning)
‐when X>95% charging Red LED off
iii. Critical: X = 5%
‐ DUT off.
Connection
ERP(Energy
related
product) compliance
Audio input
BT audio
Audio output
No
Physical button for audio switch
No special button available
Auto audio switch feature
BT audio.
Auto Standby
Yes
Auto Standby Duration
Without BT connection, after 2 minutes ,it will
shut off .
BT connection,but don't play, after 15 minutes,it
will shut off
Reset
Bluetooth connectivity
Power consumption to meet ERP
<0.3W
Auto shut off without paired
2 minutes
Factory Reset
Not
Hardware Reset
Yes
Bluetooth naming
Jam Levity
Wireless range
10 m
Supported audio codec
SBC
Supported profiles
A2DP, AVRCP so on
# of supported device in pairing list
1 paired device recorded
Supports Dual devices
NO
Volume sync
Synchronize volume with iOS
BT Pairing duration
Within 1 minutes
BT Reconnect duration
Power up = 10sec
Link lost = 10sec
BT reconnect method (single device or all devices)
Power up = attempt reconnect to same device.
Link lost = attempt reconnect to same device
twice, each time for 10 seconds
PC compatibility
Phone
device
Windows version
No information
Mac version
MacBook (Pro, Air) with OS X 10.8.2 or later
Phone model with OS version
iPod touch (2-5 Gen), iPod Nano (7 Gen),
compatibility
iPhone (6,5, 4s, 4, 3Gs, 3G), iPad (1, 2, 3, 4,
mini 1, 2),
2.5 Audio source, Available audio source Input:
Audio input
Bluetooth
Image
2.6 Available Audio Source Output: No audio output
Sequence & Priority
The audio source switch command shall allow DUT to switch sources using the following priority and sequence:
Priority
Audio input
Sequence
Default
Manual/Automatic
switch
Bluetooth
BT is 1st
Speaker, is default
2. SYSTEM FEEDBACK
3.1 The system has the following indicators, list of Audio Indications. (Prompt tone)
Indicator
Description
File Name
Power on
Hold down the power button 3 seconds
Provide by HMDX
Power down
Hold down the power button 3 seconds
Provide by HMDX
Auto power off
No Bluetooth connection and Audio input
Provide by HMDX
Low battery warning
The batter low
No
BT Pairing started
Blue LED flashing
Provide by HMDX
BT pairing successfully
蓝灯 5 秒闪一次
Provided by HMDX
BT pairing timeout
Blue LED flashing
No
BT disconnect manually
After pressing Vol+ button and Vol- button 5
Provided by HMDX
3.5 Volts
seconds, then enter into paring status
BT disconnect – link lost
Entering into paring status
No
10
BT reconnect successful
As pairing successful
Provided by HMDX
11
BT reconnect timeout
Entering
No
12
Max volume reached
Reminder
Provided by HMDX
13
Min volume reached
no
No
14
breathing light
Playing
Akin to fading in and out
Pause
into paring status
Solid light
NA
3.2 List of Physical Visual Indications
Product off, USB connected
Indicator
color
Description
Product LED
null
off
Charging LED
●
Solid as long as charging. Off when charging complete
Indicator
color
Description
Product LED
null
off
Charging LED
null
off
Power off and
USB not connected
Powering up
Indicator
color
Description
●
Product LED
On
Powering down
Indicator
color
Description
Product LED
null
off
Product on
Event
indicator
color
Description
BT audio source
Product LED
●
1.
At Re-connect or Pairing mode, Product LED flashing
2.
After paired, 蓝灯5秒闪一次
Charging mode
Event
Indicator
color
Description
Charging
Charging LED
●
Solid as long as charging. Off when charging complete.
Battery mode
Event
indicator
color
Description
Battery healthy
Charging LED
null
Charging LED off, not required
Battery low
Product LED
●
Flashing 1 sec on, 1 sec off until USB cable is inserted or battery died.
Battery critical
All LEDs
null
Off, device is off.
BT activity (The Flashing LED 0.2 seconds on and 0.2 seconds off)
Event
indicator
color
Description
BT pairing
Product LED
●
Speaker: Blue LED Slow flashing (0.2sec on, 0.2sec off) for 2min or until paired
successfully. Blue lights flash until the pairing is successful
BT connected
Product LED
●
Speaker: Blue LED stable on。 Blue lights flash once five seconds
BT disconnecting
Product LED
●
Pressing Vol+ and Vol­ simultaneously for 5 seconds, disconnect current BT device,
enter into pairing mode
Factory Reset
indicator
color
Description
Product LED
null
Unknown
3. Product status
State
Description
Off
Details: When device is Off without USB connected or Power off (MCU off, Amp off, charging off, BT off,)
To Enter: Removed USB cable and battery off
To Exit: Insert USB cable charging
On
Details: Device is on (MCU on, Amp on, charging on, BT on – connectable)
To Enter: Power on
To Exit: Power off
BT on
Details: Device is on (MCU on, Amp on, charging on, BT on – discoverable, connected, connecting)
To Enter: BT activity in progress
To Exit: Power off
Key Assignment
Power switch
States vs Press type
On position
Off position
On
Power on
Off
Power off
SP (<0.5)
LP >2~3s)
Play/Pause
States vs Press type
On
Play or pause
No response
On-aux inserted
Play or pause
No response.
BT on power up reconnect
No response
No response
BT on pairing
No response
No response.
BT on connected
Play/pause
No response
 or 
States vs Press type
SP (<0.5)
LP >2~5s)
Off
No response
No response
On
Change volume by 1 step.
No response
BT on power up re-connect
Change volume by 1 step.
No response
BT on pairing
Change volume by 1 step.
No response
BT on connected
Change volume by 1 step.
next or previous
Vol+ and Vol- pressing at the same time
transfer other language
Disconnect current BT, enter into
pairing mode.
4. UI
Refer to “SPC-0028 - HMDX Controls Logic Specification - Bluetooth Loudspeakers(D)” for the UI flow chart
5. FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2016:02:19 11:56:15+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2016:02:19 11:56:15+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User Manual.doc
Creator                         : Administrator
Document ID                     : uuid:0eed5d1f-9a01-46ad-b11e-24bdf56d9b4b
Instance ID                     : uuid:d8895159-6ff8-4c40-9aaf-d1224ee6d6af
Page Count                      : 8
Author                          : Administrator

EXIF Metadata provided by EXIF.tools