GP Electronics 07001 KEF Wireless 5000 Series User Manual KEF Wireless 5000 series

Download:
Mirror Download [FCC.gov]
Document ID	777150
Application ID	9M7FxrYxcK21kN0w2JSftg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.94kB (874274 bits)
Date Submitted	2007-04-05 00:00:00
Date Available	2007-04-05 00:00:00
Creation Date	2007-02-09 11:09:51
Producing Software	Acrobat Distiller 7.0.5 for Macintosh
Document Lastmod	2007-02-09 11:18:21
Document Title	KEF Wireless 5000 series
Document Creator	QuarkXPress(tm) 6.5
Document Author:	Vee Pallaram

K7243_KEF Wireless 5000 series manual EN
9/2/07
11:09
Page 1
Wireless
Specifications
5000 series
**
Frequency band:
2.4 - 2.4835GHz (ISM band)
Sensitivity:
Data rate:
Up to 1.1Mbps
Frequency range:
Transmission protocol:
AAFHSS
Peak audio output:
Range:
25m (27.3 yds) Typical Maximum*
Amplifier:
Crossovers:
800Hz and 5kHz
Available Finishes:
Transmitter Module
147 x 79 x 79mm
Receiver Module
Dimensions (hxwxd):
(5.8 x 3.1 x 3.1in.)
Dimensions (hxwxd):
80dB typical
20Hz - 20kHz
50W rms
2 x 50W digital amplifier
Matt Silver or High Gloss Black
Additional 50mm (2in.)
(height on floorstand)
Additional 122mm (4.8in.)
(height on deskstand)
GP Acoustics (UK) Ltd. reserve the right, in line with continuous research and development, to amend or change specifications without prior notice. E. & O.E.
* Environmental factors such as building materials and construction may adversely affect wireless signal range.
** KHT5005 speakers and stands are not included.
www.kef.com
GP Acoustics
GP Acoustics
GP Acoustics
GP Acoustics
GP Acoustics
(UK) Ltd., Eccleston Road,Tovil, Maidstone, Kent, ME15 6QP U.K. Telephone: + 44 (0)1622 672261 Fax: + 44 (0)1622 750653
(US) Inc., 10 Timber Lane, Marlboro, New Jersey 07746 U.S.A. Telephone: +(1) 732 683 2356 Fax: +(1) 732 683 2358
GmbH, Heinrichstraße 51, D-44536 Lünen, Deutschland. Telephone: +49 (0) 231 9860-320. Fax: +49 (0) 231 9860-330
(France) SAS, 39 Rue des Granges Galand - BP414, 37554 Saint Avertin CEDEX, France. Tel : +33(0)2 47 80 49 01 Fax : +33(0)2 47 27 89 64
(HK) Limited, 6F, Gold Peak Building, 30 Kwai Wing road, Kwai Chung, N.T., Hong Kong.Telephone: +85 (0) 2410 8188 Fax: +85 (0) 2401 0754
EN
Installation Manual
KEF and Uni-Q are registered trademarks. Uni-Q is protected under GB patent 2 236929, U.S. Pat. No. 5,548,657 and other worldwide patents.
KEF reserve the right, in line with continuing research and development, to amend or change specifications.
www.kef.com
290202ML
Issue 1: February 2007
K7243_KEF Wireless 5000 series manual EN
Contents
9/2/07
11:10
Page 3
Assembly
K7243_KEF Wireless 5000 series manual EN
9/2/07
11:10
Page 5
Deskstand
Floorstand
4a
5a
4b
6b
6a
7b
5b
8b
K7243_KEF Wireless 5000 series manual EN
Wireless Rx
11:10
Page 7
Wireless Tx
12
13
10
14
15
11
9/2/07
L +
R +
L -
R -
16
17
K7243_KEF Wireless 5000 series manual EN
9/2/07
11:10
Page 9
Important Points
Positioning
Follow this manual carefully for best results from speakers.
Read and return warranty card.
Avoid temperature extremes.
Avoid direct sunlight.
Avoid damp.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
conditions: (1) this device does not cause harmful
interference. (2) this device will accept any
interference received, including interference that
may cause undesired operation.
WARNING:
THE MANUFACTURER IS NOT RESPONSIBLE FOR
ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER
AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause detrimental interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Clean with a damp lint free cloth.
Do not use spirit based cleaners.
SAFETY NOTICE! Trailing cables are dangerous. Secure all cables.
K7243_KEF Wireless 5000 series manual EN
9/2/07
11:10
Page 11
Introduction
GB
This wireless system is intended for use as part of a home entertainment surround sound speaker system as left surround
speaker and right surround speaker.The KEF Wireless system implements unique RF transmission technology based on
AAFHSS (Advanced Adaptive Frequency Hopping Spread Spectrum).This ensures exceptionally robust delivery of the high
quality audio channels that are encoded using HFADPCM (High Fidelity Adaptive Differential Pulse Code Modulation).
It can be assembled with the KHT5005.2 rear speakers either with the floor stand or the desk top foot. It is for indoor
use only.
Connecting the Transmitter Unit
i) Power OFF all the A/V equipment during the installation of wireless system.
ii) Connect the supplied AC-DC adaptor to the DC Jack on the rear panel of the transmitter unit. Connect the KEF
Audio Jack connector to the key hole socket on the rear panel of the transmitter unit .
iii) Connect the speaker inputs to the REAR LEFT speaker and REAR RIGHT speaker terminals of your AV receiver using
the provided cable.
Surround sound settings
Ensure that your AV receiver is set to 5.1 channel surround sound. If it has a calibration feature then this can be used to
independently adjust the rear speaker volume levels to compensate for your room. If there is an adjustable bass
management setting ensure that it is set to “small speakers” or with a crossover of approximately 100Hz.
The wireless system is specifically designed for audio and does not require any set up. The correct receiver is required
for the LEFT rear speaker and the RIGHT rear speaker. Simply assemble the wireless module into the speaker stand,
plug it into the mains and switch them on.
Connecting the Reciever Units
i) Remove the speaker terminal caps from your HTS5001.2 speakers, place the supplied contact pin holder on the
terminal posts and then replace the terminal caps.
ii) Insert the supplied long bolt into each of the KHT5001.2 speaker foot screw hole.
iii) Slide the top of wireless receiver unit over the long bolt and then push down ensuring that the terminal contacts align
with the wireless module socket.
iv) The wireless receiver units have been pre-set for either LEFT audio channel or RIGHT audio channel. Refer to the
small marking on the rear of the wireless receiver units to ensure that the correct receiver unit is used for left or
right speaker.
Assembly to the Floorstand
i) Insert the bolt provided into the bottom of the wireless receiver units to secure the wireless module to the speaker
and tighten.
ii) Insert the AC-DC adaptor cable through the base of the floor stand such that the plug can be connected to the
DC Jack connector of wireless receiver unit.
iii) Assemble the complete wireless receiver unit by aligning the rear and then the front guides and pressing it down into
the KHT5001.2 floor stand,
iv) Connect the AC-DC adaptor plug into the main AC socket. The wireless receiver units will power-on and the blue
bonding light on the front of the wireless module will be flashing to show that the speaker is now ready to output
audio when the transmitter is turned on.
GB
Rear Left + White
Rear Right + Red
Rear Left - Black
Rear Right - Blue
iv) Rotate the position of the transmitter unit such that the front panel is facing toward the wireless speakers.
v) Connect the power supply to the mains socket. Turn on the transmitter by pressing the power button on the
front panel.
vi) Ensure the blue bonding light is permanently on, this shows that the transmitter unit and receiver units are successfully
bonded and ready to output the audio. If the bonding light is flashing, then check that both receiver units have been
powered-on and are within range.
vii) Turn on the audio source which is connected to the transmitter unit and adjust the volume level accordingly from the
remote control of the audio source.
LED indicator
Steady:
Transmitter and receiver units are successfully bonded and ready to output audio.
Flashing:
Module is powered on but there is a problem that will prevent audio from sounding.
1) Check that all modules are powered on.
2) Check that both receivers are within range.
Connecting to a KIT200
home thereafter system
i) Remove the transmitter speaker cable adaptor.
ii) Cut the rear left and rear right KIT200 speaker cables.
iii) Screw in the rear left and the rear right speaker cables to the adaptor.
SLSL+
Assembly to the Desktop stand
SRSR+
i) Place the wireless receiver unit into the aluminium casing and screw the extension bolt to the bottom of the
aluminium casing.
ii) Assemble the metal foot to the casing and align the hole to the bolt accordingly.Tighten the bolt with the nut provided
at the bottom of the metal foot.
iii) Plug the AC-DC adaptor to the DC Jack connector of wireless receiver unit from the hole provided underneath the
aluminium casing.
iv) Connect the AC-DC adaptor plug into the main AC wall socket.The wireless receiver units will power-on and the blue
bonding light on the front of the wireless module will be flashing to show that the speaker is now ready to output
audio when the transmitter is turned on.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
GTS PDFX Conformance            : PDF/X-1a:2001
Producer                        : Acrobat Distiller 7.0.5 for Macintosh
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Modify Date                     : 2007:02:09 11:18:21Z
Creator Tool                    : QuarkXPress(tm) 6.5
Create Date                     : 2007:02:09 11:09:51Z
Metadata Date                   : 2007:02:09 11:18:21Z
Format                          : application/pdf
Creator                         : Vee Pallaram
Title                           : KEF Wireless 5000 series
Document ID                     : uuid:404021c6-b82f-11db-9279-0016cb38bb30
Instance ID                     : uuid:40402590-b82f-11db-9279-0016cb38bb30
Page Count                      : 6
Author                          : Vee Pallaram

EXIF Metadata provided by EXIF.tools