GUANGZHOU GAOKE COMMUNICATIONS TECHNOLOGY FG700X FIBER GATEWAY (Router) User Manual FG7008N
Guangzhou Gaoke Communications Technology Co., Ltd FIBER GATEWAY (Router) FG7008N
Contents
- 1. FG7008N User Manual-Part 2
- 2. FG7008N User Manual -Part1
FG7008N User Manual -Part1
![Preface Version Statement This Manual is provided for FG7008N gateway, the software version must be at least 1.10. Brief Introduction This manual provides technical information on how to configure and operate application for your FG7008N unit. Chapter 1: Provides an overview of FG7008N Chapter 2: Introduces the product Chapter 3: Introduces the configuration via WEB-based Management Intended Audience System administrators. Network engineers. Maintenance technicians. Style Convention Table 1 Style convention used in this manual Style Meanings \ Multi-level catalogs or menus are separated by ‘\’ character. For instance “file\new\directory” means the menu item “directory” in menu “new” which in turn in the menu “file”. Used to highlight important area in diagrams. <> Indicates the input data from operating terminal. [] Indicates one parameter configuration or a function. { XX | XX } Indicates a syntax of CLI command options, multiple command options in one “{}”, separated by “|”, means exclusive single selection. host(italic) Indicates user specified parameters. e.g. for command: tftp host {get | put} {sys | cfg} filename The host and filename should be replaced by user specified real parameters, such as: tftp 138.0.0.1 get sys sysfile.bin Table 2 Convention for Mouse Operation Operation Meanings Click Press and release a mouse button quickly Double click Quickly press and release a mouse button twice Drag Press a mouse button and move the mouse](https://usermanual.wiki/GUANGZHOU-GAOKE-COMMUNICATIONS-TECHNOLOGY/FG700X.FG7008N-User-Manual-Part1/User-Guide-2555501-Page-4.png)
![FG7008N User Manual Page 74 of 111 ► Delay Level: Choose the delay level, five levels are provided: Minimum, Smaller, Moderate, Larger, Maximum. ► DTMF Transfer Model: Select DTMF transmission mode: In-Band, INFO, RFC2833. ► RFC2833 Load Type: If RFC2833 is selected, specify payload type of RFC2833. ► T38 Max FAX Rate: Select the maximum rate, when using T38 fax mode: Unlimited, 2400bps, 4800bps, 7200bps, 9600bps, 12000bps, 14400bps. ► T38 Signaling Redundancy: Configure the redundancy of T38 signal. ► T38 Data Redundancy: Configure the redundancy of T38 data. ► Ring Frequency: Choose the ring frequency: 20Hz, 25Hz. ► Impedance Type: Choose the impedance type: 600Ώ, China Standard, Switzerland Standard. 3.5.6 Digitmap The destination number will be sent all in one time for SIP application, digitmap is used to determine exactly when there are enough digits entered from the user to place a call. If the number length of suited route item is fixed, the number will be sent when specified number of digits is received; the call will be disconnected when inter-digit timeout expires. If the number length of suited route item is indefinite, there are 3 ways to determine whether the digits is enough, press pound(#) key, timeout expires or digitmap comparing. If digits dialed partly matching with digitmap patterns, continue waiting of number receiving. If they match, send the number immediately. If not, send the number immediately too, in order to play the prompts. Table 3-1 Digitmap Characters Character Description 0～9 Indicates specific digits in a telephone number expression. X Wildcard, matches any digit, excluding “#” and “*”. * Digit star # Digit pound - Connects the start and the end of a range [] Indicates the a range of numbers(not letters). . Matches an arbitrary number of occurrences of the preceding digit, including 0. | Indicates a choice of matching expressions (OR). T Inter-digit timeout expires S Short timer expires, usually place at the middle of an expression Digitmap Example: 8XXXXXXX|1[0-24]0|2[18].3|3XXSXX|[0-9*#][0-9*#][0-9*#].#|[0-9*#].T “8XXXXXXX” denotes numbers start with 8, the length is 8. “1[0-24]0” denotes numbers include 100, 110, 120 and 140. “2[18].3” denotes numbers that start with 2 and end with 3, there can be arbitrary length of 1 or 8 after the first digit 2. 23, 213, 2183 is matched. “3XXSXX” denotes numbers start with 3, the length can be 3 or 5. If the short timer configured expires between the third digit and the fourth digit, the number will be sent. “[0-9*#][0-9*#][0-9*#].#” denotes numbers end with #, and the length is no less than 2.](https://usermanual.wiki/GUANGZHOU-GAOKE-COMMUNICATIONS-TECHNOLOGY/FG700X.FG7008N-User-Manual-Part1/User-Guide-2555501-Page-82.png)
![FG7008N User Manual Page 75 of 111 “[0-9*#].T” denotes any number that dialing time out. Choose the menu VOIP Service→Digitmap to load the following page. Figure 3-116 Configure Digitmap The following items are displayed on this screen: ► Enable: Enable or disable digit map function. ► Short Timer: Enter the time of Short Timer in second. ► Digit Map: Enter the digit map rules. 3.5.7 Signal Tone Choose the menu VOIP Service→Signal Tone to load the following page.](https://usermanual.wiki/GUANGZHOU-GAOKE-COMMUNICATIONS-TECHNOLOGY/FG700X.FG7008N-User-Manual-Part1/User-Guide-2555501-Page-83.png)
