Garmin 01178 Remote Control User Manual Users Guide

Garmin International Inc Remote Control Users Guide

Users Guide

1User’s Guide GRC 10© Copyright 2008 Garmin Ltd. or its subsidiariesPart Number: 190-00355-11 Rev. A Printed in U.S.A.XM is a registered trademark of XM Satellite Radio. 190-00355-11_0A.indd 1 1/2/2008 11:06:43 AM
2Notes and Cautions CAUTION: Stow the GRC 10 in a secure location (i.e., glove box, seat back pocket, etc.) when it is not in use to prevent damage to the aircraft interior or injury to occupants caused by aircraft maneuvers. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This device does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. Other transmitting systems which may exist in the aircraft: CAUTION: Bluetooth and other non-aviation transmitters require separate authorization for use in an aircraft. If they are present, note that interference from such devices may degrade the performance of the GRT10/GRC 10 wireless remote system. © 2008 Garmin Ltd. or its subsidiaries. All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express written permission of Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed for personal use, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve their products and to make changes in the content of this material without obligation to notify any person or organization (other than the FAA or other certification organization) of such changes or improvements. January 2008 190-00355-11 Rev. A190-00355-11_0A.indd 2 1/2/2008 11:06:44 AM
3 NOTE: Operators may use STC SA01487SE qualification of the GRC/GRT 10 as a basis for showing compliance with 14 CFR Part 91.21. NOTE: This device has been approved for use in the USA and Canada only. NOTE: The USB port is for factory use only. IntroductionThe GRC 10 is a remote control for the XM radio function of the GDL 69A. The GRC 10 uses a radio link and does not need to be pointed at the receiver. The GRC 10 range is approximately 10 m (30 feet) and should work anywhere in the cabin. System InfoSystem information about the GRC 10 is available from the Menu page. Information includes: GRC 10 Software Versions, GRT 10 Software Versions, and the RF Pairing ID. The GRC 10 serial number is located under the batteries. To view System Info1. Press the MENU key. 2. Press the p or q key to highlight the System info menu selection. 3. Press the u key to show the System info. 4. Press MENU, XM, or one of the arrow keys to return to the Menu. Caring for the GRC 10The GRC 10 is constructed of high quality materials and does not require user maintenance other than cleaning. Clean the unit using a cloth dampened with mild detergent solution and then wipe dry. Avoid chemical cleaners and solvents that may damage plastic components. 190-00355-11_0A.indd 3 1/2/2008 11:06:44 AM
4Battery InstallationThe GRC 10 requires two AA batteries (included). Remove the battery lid, located in the back of the unit, by pressing down and pulling out the tab. Alkaline batteries are recommended, but NiCd or NiMH batteries may be used. Stored data is not lost when batteries are removed. Install the batteries, observing the polarity diagram printed on the label inside the battery compartment. If the unit does not turn on, or the battery level show no bars, replace the batteries. CAUTION: When replacing batteries, use only new or fully charged batteries. Do not mix new and old batteries as this can cause battery leakage and damage to the unit. Do not mix battery types. CAUTION: Remove batteries if the unit will not be in use for several months. Storing batteries in the unit for prolonged periods may result in leakage and damage to the battery compartment. WARNING: Follow the manufacturer’s instructions for proper care and disposal of batteries. Do not incinerate used batteries, as internal materials may ignite with explosive violence. WARNING: Do not use lithium batteries in the GRC 10. Battery Cover190-00355-11_0A.indd 4 1/2/2008 11:06:47 AM
5XM (Enter)Press to confirm selection.PhotosensorControls auto-backlight. PSETDisplays the Preset channels.PREVSelect the previous channel. MENUDisplays the menu.MUTEToggles the audio on/off. +Increases audio volume.–Decreases audio volume.pScroll up /Preceding channel.qScroll down/next channel.uPage or select right. tPage or select left. Power On1. Turn on the GRC 10 by pressing and releasing any key. 2. A Power Up Page briefly appears followed by a display of the active channel information. The station list is loaded in the background and will be available when the XM radio has the complete list. Power OffThe unit will automatically turn off after a period of inactivity. The auto-off time is adjustable on the Menu page. To turn the unit off manually1. Press the MENU key. 2. Press the p or q key to highlight the Power down menu selection and press the XM (Enter) key. 190-00355-11_0A.indd 5 1/2/2008 11:06:48 AM
6Page NavigationPress the t or u key to move through the pages: Channels, Active Channel, and Categories. Press the p or q key to move up and down through the list of the current function to highlight the desired item. Active Channel PagePress the t or u key to display the Active channel information. Page nameActive channel numberArtist/Feature nameSong titleCategory nameSignal strengthBattery levelVolume levelChannel nameThe large text in the middle of the display does not always fit. The text will automatically scroll once to make it readable. Press the XM (Enter) key to continue scrolling. NOTE: The battery level indicator will not be accurate with rechargeable batteries. Font SizeThe Artist/Feature name may have a large or small font. The Artist/Feature name will not scroll when the Large font is off. Large font off increases battery life. 1. Press the MENU key. 2. Press the p or q key to highlight the Large Font menu selection. 3. Press the t or u keys to toggle between Large Font On or Off. 4. Press MENU, XM, or one of the arrow keys to return to the Menu. 190-00355-11_0A.indd 6 1/2/2008 11:06:48 AM
7Category PageCategories of channels, such as Jazz, Rock, Sports, or News, can be selected to list the available channels for a type of music or other contents. Category ListTo select a Category1. Press the t or u key to display the Category list. 2. Use the p or q key to highlight the desired Category. 3. Press the XM (Enter) key to display the channels in the highlighted Category. Channel PageThe Channel page allows you to select a channel from the full channel list or the selected category channel list. Full Channel ListTo select a Channel1. Press the t or u key to display the Channel list. 2. Use the p or q key to highlight the desired Channel. 3. Press the XM (Enter) key to select the highlighted Channel. 190-00355-11_0A.indd 7 1/2/2008 11:06:49 AM
8Adjusting the LCD ContrastIf the display is difficult to read, you may adjust the LCD Contrast. To adjust the LCD Contrast1. Press the MENU key. 2. Press the p or q key to highlight the Contrast menu selection. 3. Press the t or u key to increase or decrease the LCD Contrast level. Press and release quickly for small increments or press and hold to scroll rapidly. BacklightBoth the display and keypad are backlit. The GRC 10 uses a photosensor that is located in the round window above the PSET key. The photosensor measures the ambient light conditions to determine the need for backlighting. You can force the backlight on by covering the photosensor window, however this will reduce battery life. Extensive use of backlighting will significantly reduce battery life. When the batteries are low, the keypad backlight will not turn on. Setting the Auto-Off TimeThe Auto-Off Time setting allows you to set values of 10, 30, or 60 minutes to help save power. To adjust the Auto-Off Time1. Press the MENU key. 2. Press the p or q key to highlight the Auto-Off menu selection. 3. Press the t or u key to increase or decrease the Auto-Off period. 190-00355-11_0A.indd 8 1/2/2008 11:06:50 AM
9Previous ChannelPressing the PREV key will toggle between the current channel and the previously selected channel. Preset ChannelsThe PSET (Preset) key allows you to store up to 15 favorite channels to a selected Preset number. The presets are stored in the GDL 69A so they can be accessed from the cockpit display. Preset numberPreset channel numberPreset channel nameTo store a Preset Channel1. Press the PSET key. 2. Press the p or q key to highlight the desired Preset (1 - 15) number. 3. Press and hold the XM (Enter) key until the message “Storing Preset” is displayed. To select a Preset Channel1. Press the PSET key. 2. Press the p or q key to highlight the desired Preset (1 - 15) number. 3. Press the XM (Enter) key briefly to select the highlighted channel. 190-00355-11_0A.indd 9 1/2/2008 11:06:50 AM
10Setting VolumeThe + and - keys at the bottom of the unit allow you to set the volume for the system. The volume +, volume –, and mute keys may not function in all installations since the volume may be configured to be adjusted individually at each headset. A message will be displayed if the volume control is disabled and a lock icon will appear in the volume location . To adjust the Volume settings 1. Press + key to increase the volume level. 2. Press the – key to decrease the volume level. To Mute the audio 1. Press the MUTE key to turn the audio off or to a very low level. 2. Press the MUTE key again to return the audio to the previous level. XM Entertainment SystemGRC 10GDL 69AAntenna GRT 10XM Satellite PrimaryDisplay190-00355-11_0A.indd 10 1/2/2008 11:06:51 AM
11MessagesMessage DescriptionGRT 10 not found The GRC 10 has not estab-lished communication with the GRT 10GDL 69A not found The GRT 10 has not estab-lished communication with the GDL 69AGDL 69A connection lostThe GRT 10 has lost communi-cation with the GDL 69AGRT 10 connection lost The GRC 10 has lost commu-nication with the GRT 10Preset load failed The GDL 69A failed to return the preset listPreset store failed The GDL 69A failed to store the preset channelXM category data loadingThe GRT 10 has not finished loading a complete category list from the GDL 69AXM channel data loadingThe GRT 10 has not finished loading a complete channel list from the GDL 69A NOTE: The GRC 10 is paired to the aircraft’s GRT 10 at installation. The GRC 10 will not control the XM audio functions of another aircraft. 190-00355-11_0A.indd 11 1/2/2008 11:06:51 AM
© 2008 Garmin Ltd. or its subsidiariesGarmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax 913/397.8282Garmin AT, Inc. 2345 Turner Rd., S.E., Salem, Oregon 97302, U.S.A. Tel. 503/581.8101 or 800/525.6726 Fax. 503/364.2138Garmin (Europe) Ltd. Liberty House, Bulls Copse Road, Hounsdown Business Park, Southhampton, SO40 9RB, U.K. Tel. +44 (0) 870 850 1243 Fax +44 (0) 238 052 4004Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099www.garmin.comPart Number 190-00355-11 Rev A190-00355-11_0A.indd 12 1/2/2008 11:06:53 AM

Navigation menu