Garmin 01475 LOW POWER COMMUNICATIONS TRANSMITTER User Manual 2

Garmin International Inc LOW POWER COMMUNICATIONS TRANSMITTER Users Manual 2

Contents

Users Manual 2

quick release instructionsquick release instructionsquick release instructionsquick release instructionsquick release instructionsquick release instructionsquick release instructionsquick release instructionsquick release instructionsquick release instructionsquick release instructionsForerunner® 310XT
2 Quick Release Instructions See the Important Safety and Product Information guide in the product box for product warnings and other important information.Quick Release KitQuick release bracketBike mountWristbandCable ties (4)Extra wrist mount and spring pins (2)Spring pin toolThe Quick Release Kit is perfect for athletes who use their Forerunner for both running and biking. This kit also contains an extra wrist mount that can be used for other activities or with other compatible wristbands. When the bracket and mounts are properly installed, you can move your Forerunner quickly from your handlebars to your wrist. note: For more information, see the Forerunner 310XT Owner’s Manual.••••••
Quick Release Instructions AStep 1: Remove the Wristband1. Insert the tip of the spring pin tool in the pin access hole.2. Push inward towards the wristband, and then release the spring pin outward.3. Repeat for the other spring pin. Be careful not to lose the spring pins.Spring pin toolPin access holesStep 2: �nstall the Quick�nstall the Quick Release Bracket1. Verify that the arrow on the back of the quick release bracket is pointing up and your Garmin device is facing up.2. Use the spring pin tool to install the bottom spring pin back into the Forerunner.3. Insert the top spring pin into the top slot of the quick release bracket.
4 Quick Release Instructions4. Slide the open end (bottom) of the quick release bracket onto the bottom spring pin of the Forerunner.Quick release bracket5. Using the spring pin tool, install the top spring pin of the quick release bracket into the top slot of the Forerunner. Your Forerunner and the bracket are now one movable unit.Step 3: �nstall the Bike MountYou can install the bike mount on any part of your handlebars or on the stem. Ensure that the Garmin unit is facing up for the best GPS reception.1. Place the bike mount on your handlebars or stem.2. Attach the bike mount securely using two cable ties.
Quick Release Instructions Acable tieshandlebarcenter screwbike mount For vertical bars: remove the center screw, turn the front plate 90 degrees, and replace the center screw. Now you can attach the Forerunner to the bike mount.3. Align the quick release bracket with the front plate of the bike mount so that the unit is vertical.4. Press and turn the unit clockwise until the it snaps into place horizontally.
6 Quick Release InstructionsStep 4: Move the Forerunner From the Bike Mount to the Wrist Mount1. Turn the Forerunner 90 degrees counterclockwise to separate it from the bike mount.2. Align the quick release bracket with the front of the wrist mount so that the unit is horizontal.3. Press and turn the unit 90 degrees clockwise until the it snaps into place vertically.
Quick Release Instructions ALimited WarrantyGarmin’s standard limited waranty applies to this accessory. For more information, see the Important Safety and Product Information in the Garmin product box.
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com.© 2009 Garmin Ltd. or its subsidiariesGarmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USAGarmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9RB UKGarmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwanwww.garmin.comFebruary 2009 Part Number 190-01060-91 Rev. A Printed in Taiwan

Navigation menu