Garmin 0163700 Receiver used w/Pt 15 Transmitter User Manual
Garmin International Inc Receiver used w/Pt 15 Transmitter Users Manual
Garmin >
Contents
Users Manual
GMA 350/350c pilot’s guide Copyright © 2011, 2015 Garmin Ltd. or its subsidiaries. All rights reserved. This manual reflects the operation of GMA 350/350c units. Some differences in operation may be observed when comparing the information in this manual to earlier or later Mod status levels. Garmin International, Inc., 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Tel: 913/397.8200 Fax: 913/397.8282 Garmin AT, Inc., 2345 Turner Road SE, Salem, OR 97302, U.S.A. Tel: 503/391.3411 Fax 503/364.2138 Garmin (Europe) Ltd, Liberty House, Bulls Copse Road, Hounsdown Business Park, Southampton, SO40 9RB, U.K. Tel: 44/0870.8501241 Fax: 44/0870.8501251 Garmin Corporation, No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel: 886/02.2642.9199 Fax: 886/02.2642.9099 Web Site Address: www.garmin.com Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express written permission of Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed for personal use, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin® is a registered trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. ©2015 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Other trademarks and trade names are those of their respective owners. September, 2015 190-01134-12 Rev. G Printed in the U.S.A. LIMITED WARRANTY This Garmin product is warranted to be free from defects in materials or workmanship for two years from the date of purchase. Within this period, Garmin will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts and labor, provided that the customer shall be responsible for any transportation cost. This warranty does not cover failures due to abuse, misuse, accident, or unauthorized alterations or repairs. In addition, Garmin reserves the right to refuse warranty claims against products or services that are obtained and/or used in contravention of the law of any country. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. Some states do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you. Garmin retains the exclusive right to repair or replace the unit or software, or to offer a full refund of the purchase price, at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. To obtain warranty service, contact your local Garmin Authorized Service Center. For assistance in locating a Service Center near you, visit the Garmin Web site at “http:// www.garmin.com” or contact Garmin Customer Service at 800-800-1020. CAUTION: Incorrect aircraft wiring could short the left channel or both channels to ground if a monaural headset is plugged into the stereo jacks. If wired incorrectly, fail-safe operation will not work. Transmitter Grant of Equipment Authorization FCC ID: IPH-0163700 IC: 1792A-0163700 IC M/N: GMN-00871 NOTE This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation NOTE This device does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes RSS sans licence d’Industrie Canada. Son fonctionnement est soumis aux conditions suivantes: (1) cet appareil ne doit pas causer d’interférences et (2) doit accepter toute interférence,y compris les interférences pouvant entraîner un fonctionnement indésirable de l’appareil. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante. FCC Statement for Mobility Device This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. GMA 350/350c Audio Panel Controls 11 12 13 14 15 16 17 18 19 24 25 10 20 21 GMA 350 Controls 22 23 26 GMA 350c (Bluetooth) Controls NOTE: When a key is selected, a triangular annunciator above the key is illuminated. MKR/MUTE – Selects marker beacon receiver audio. Mutes the currently received marker beacon receiver audio. Deactivates automatically and marker beacon audio is heard when the next marker beacon signal is received. Also, stops play of recorded COM audio. Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel COM1 – When selected, audio from the #1 COM receiver can be heard. Press and hold to enable/disable monitored COM muting during primary COM reception. COM2 – When selected, audio from the #2 COM receiver can be heard. Press and hold to enable/disable monitored COM muting during primary COM reception. NAV1 – When selected, audio from the #1 NAV receiver can be heard. NAV2 – When selected, audio from the #2 NAV receiver can be heard. – Selects and deselects audio from a telephone or entertainment device connected to the Front Panel Jack. Audio from a telephone connected to the rear of the audio panel is used if a device is not connected to the Front Panel Jack. Press and hold to enable/disable muting during reception. MUS1 – Selects and deselects music entertainment audio. Press and hold to enable/disable MUS1 muting during reception. MUS2 – Selects and deselects music entertainment audio. Press and hold to enable/disable MUS2 muting during reception. MAN SQ – Manual Squelch annunciator. When lit, squelch is controlled manually. 10 Volume Indicator – Indicates volume/squelch setting relative to full scale. 11 Front Panel Jack – Used for an entertainment or telephone input. 12 MIC1 – Selects the #1 transmitter for transmitting. COM1 receive is simultaneously selected when this key is pressed allowing received audio from the #1 COM receiver to be heard. COM2 receive can be added by pressing the COM2 Key. Selection of a second MIC button initiates Split-COM mode. When in Split-COM mode, the pilot is using COM1, the copilot is using the COM2. 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide GMA 350/350c Audio Panel 13 MIC2 – Selects the #2 transmitter for transmitting. COM2 receive is simultaneously selected when this key is pressed allowing received audio from the #2 COM receiver to be heard. COM1 receive can be added by pressing the COM1 Key. Selection of a second MIC button initiates Split-COM mode. When in Split-COM mode, the pilot is using COM1, the copilot is using the COM2. 14 PLAY – Press once to play the latest recorded memory block. Press while audio is playing begins playing the previously recorded memory block. Each subsequent press thereafter plays the previous block of memory. 15 AUX – When selected, audio from the AUX inputs can be heard. 16 PILOT – Controls the pilot intercom system. Press and hold to toggle 3D Audio on/off for all headset positions. 17 COPLT – Controls the copilot intercom system. Press and hold to toggle copilot configuration between crew and passenger. 18 PASS – Controls the passenger intercom system. Press and hold to enable/disable passenger muting during reception. 19 SPKR – Selects and deselects the cabin speaker. COM, NAV, AUX, and MKR receiver audio can be heard on the speaker. Press and hold for 2 seconds for Passenger Address (PA). The SPKR key flashes during PA. 20 Cursor (CRSR) Control Knob – Turn to move the cursor (flashing white or blue annunciator) to the desired source. 21 Volume (VOL) Control Knob – Turn the smaller knob to control volume or squelch of the selected source (indicated by the flashing white or blue annunciator). When the volume control cursor is not active press to switch to Blue-Select mode. If the volume control cursor is active, press twice (once to cancel the cursor, twice to activate BlueSelect mode). Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel 22 Bluetooth® Connection Annunciator – (GMA 350c only) A flashing blue annunciator indicates the unit is discoverable. A solid blue annunciator indicates an active Bluetooth connection. 23 Key Annunciator – (GMA 350c only) Assigns the Bluetooth device to the audio source. Press the key until the annunciator turns blue. The key annunciator will cycle from OFF to WHITE to BLUE. WHITE selects the wired audio source and BLUE selects the Bluetooth audio source. NOTE: The Bluetooth audio can only be assigned to one source at a time. Once the Bluetooth audio is assigned to an audio source, the remaining entertainment audio sources will only cycle between OFF and WHITE. 24 MUS1 Key Annunciator – (GMA 350c only) Assigns the Bluetooth device to the MUS1 audio source. Press the MUS1 key until the annunciator turns blue. The key annunciator will cycle from OFF to WHITE to BLUE. WHITE selects the wired audio source and BLUE selects the Bluetooth audio source. NOTE: The Bluetooth audio can only be assigned to one source at a time. Once the Bluetooth audio is assigned to an audio source, the remaining entertainment audio sources will only cycle between OFF and WHITE. 25 MUS2 Key Annunciator – (GMA 350c only) Assigns the Bluetooth device to the MUS2 audio source. Press the MUS2 key until the annunciator turns blue. The key annunciator will cycle from OFF to WHITE to BLUE. WHITE selects the wired audio source and BLUE selects the Bluetooth audio source. NOTE: The Bluetooth audio can only be assigned to one source at a time. Once the Bluetooth audio is assigned to an audio source, the remaining entertainment audio sources will only cycle between OFF and WHITE. 26 Control Knob Press and Hold – (GMA 350c only) Press and hold for two seconds to enable the GMA 350c as discoverable for pairing. The Bluetooth Annunciator with flash to indicate that the unit is discoverable. The unit will remain discoverable for 90 seconds or until a successful pair is established. Once a successful pair is established, the audio “Bluetooth paired” is played. 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide GMA 350/350c Audio Panel Features and Operation The GMA 350/350c Audio Panel provides the traditional audio selector functions of microphone and receiver audio selection. The Audio Panel includes an intercom system (ICS), a marker beacon receiver, and a COM clearance recorder. Ambient noise from the aircraft radios is reduced by Avionics Squelch (ASQ). When no audio is detected, ASQ processing further reduces the amount of background noise. The MAN SQ Key toggles between manual and automatic intercom system (ICS) squelch. In automatic ICS squelch mode, threshold adjustments are handled automatically by the system. In manual ICS squelch mode, individual threshold adjustments can be made for the pilot, copilot, and passenger microphones by the crew. The ability to adjust individual thresholds for each ICS position further reduces the amount of background noise from the radios. Pushbutton keys control audio selection. When a key is selected, a triangular annunciator above the key is illuminated. Annunciator brightness is adjusted automatically by photocell dimming. Key brightness is adjusted by the radio dimming bus control. Three Aux inputs are available for additional avionics or audio devices. Upon installation, the unit may be configured in various ways depending on aircraft type and the needs of the pilot. Power-UP The GMA 350/350c performs a self-test during power-up. During the self-test all Audio Panel annunciator lights illuminate for approximately two seconds. Once the self-test is completed, most of the settings are restored to those in use before the unit was last turned off. 10 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Mono/Stereo Headsets Stereo headsets are recommended when using the GMA 350/350c. Using a monaural headset in a stereo jack shorts the right headset channel output to ground. While this does not damage the Audio Panel, a person listening on a monaural headset hears only the left channel in both ears. If a monaural headset is used at one of the passenger positions, any other passenger using a stereo headset hears audio in the left ear only. Transceivers NOTE: Transceiver functions may also be accessed via Voice Recognition commands. Refer to the Voice Recognition section for more information. Audio from the #1 or #2 COM receiver can be selected independently by pressing the respective Key(s) (COM1 or COM2). Pressing MIC1 or MIC2 selects the #1 or #2 transmitter and simultaneously selects the related COM receiver (COM1 or COM2) allowing received audio to be heard. The other COM receiver can be added by pressing the respective key. During reception of audio from the COM radio selected for transmission, audio from the other COM radio is muted. Enabling/Disabling Monitored COM Muting Press and hold COM1 or COM2 to enable/disable monitored COM muting during reception of audio from the COM radio selected for transmission. The aural message “Monitor Mute Enable/Disable” is heard. 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 11 GMA 350/350c Audio Panel Split-COM Mode NOTE: Split COM performance is affected by the distance between the COM antennas and the separation of the tuned frequencies. If the selected COM frequencies are too close together, interference may be heard during transmission on the other radio. During Split-COM operation, both the pilot and the copilot can transmit simultaneously over separate radios. Pressing both MIC Keys simultaneously initiates Split-COM Mode (i.e., COM1/COM2). The respective COM1/MIC1 or COM2/MIC2 annunciators are illuminated indicating Split-COM operation. Split-COM operation is cancelled by pressing one of the selected MIC Keys again. In Split-COM mode, the pilot uses COM1 and the copilot uses COM2. COM2 Radio is Selected Selecting a COM Radio for Transmit 12 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Transmit Indications During COM transmission, the active transceiver (MIC1 or MIC2) Key Annunciator flashes approximately once per second. During Split-COM transmission, the MIC1 annunciator flashes when the pilot’s microphone PTT is pressed. The MIC2 annunciator flashes when the copilot’s microphone PTT is pressed. Annunciator Flashes During Transmission COM Radio Transmit Indication Receivers NOTE: Receiver functions may also be accessed via Voice Recognition commands. Refer to the Voice Recognition section for more information. Pressing the NAV1 and/or NAV2 Key(s) selects/deselects the receiver audio for the corresponding navigation radio source. The selected audio source can be heard over the headset and the speaker (if selected). All radios can be selected individually or simultaneously. Selecting a NAV Radio Receiver 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 13 GMA 350/350c Audio Panel Marker Beacon Receiver The marker beacon receiver detects any marker beacon signal within the reception range of the aircraft. When a marker beacon signal is detected, the lamps illuminate, and an associated keyed-tone is heard when MKR audio is selected. Marker beacon lamps operate independently of any audio selection and cannot be turned off. Marker Beacon Key & Lamps The marker beacon signal sensitivity threshold can be set to High, Low, or User Selectable (toggle switch required). The receiver detects the three marker tones (outer, middle, and inner). Audio Frequency 400 Hz (Outer) 1300 Hz (Middle) 3000 Hz (Inner) Audio Keying −−−−− −−−−− Lamp Actuated Blue Amber White The GMA 350/350c provides three states of marker beacon operation; On, Muted, and Deselected. The MKR/MUTE key annunciator indicates when marker beacon audio is selected. Marker beacon audio is not heard when the annunciator is off or when the annunciator is on with the marker beacon audio muted. 14 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Turning Marker Beacon Audio On With the MKR/MUTE annunciator off, press the MKR/MUTE Key to activate marker beacon audio and illuminate the MKR/MUTE annunciator. Muting Marker Beacon Audio During marker beacon audio reception, press the MKR/MUTE Key to mute the audio. The MKR/MUTE annunciator remains lit, but the current marker tone is silenced. Audio muting deactivates automatically and marker beacon audio is heard when the next marker beacon signal is received. Deselecting Marker Beacon Audio To deselect marker beacon audio, press the MKR/MUTE Key twice during marker beacon reception or once if a marker beacon signal is not detected. Intercom System (ICS) NOTE: Intercom functions may also be accessed via Voice Recognition commands. Refer to the Voice Recognition section for more information. The GMA 350/350c includes a six-position intercom system (ICS), two MUSIC inputs, and one telephone/entertainment input for the pilot, copilot and passengers. The intercom provides Pilot, Copilot, and Passenger audio isolation. Intercom Controls 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 15 GMA 350/350c Audio Panel Press the PILOT, COPLT, and/or PASS Keys to distribute as required. If the annunciators are lit, those positions will share intercom audio. If an annunciator is NOT lit that position is isolated from the others. Copilot Configured as Crew or Passenger NOTE: When the copilot position is configured as a passenger, the COPLT Key is disabled and the copilot headset is treated as a ‘passenger’ for intercom and entertainment audio distribution. The copilot position can be configured as crew (COPLT Key enabled) or as a passenger (COPLT Key disabled). Pressing and holding the COPLT Key toggles the copilot position configuration between passenger and crew. The aural message “Copilot as Passenger” or “Copilot as Crew” is heard. Intercom MODES NOTE: In the following modes the copilot position is configured as crew. NOTE: In the default ICS configuration, only the pilot and copilot positions can hear aircraft alerts. 16 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel All Intercom Mode In ‘All Intercom’ mode the Pilot, Copilot, and Passengers hear each other and hear the aircraft audio. Aircraft Audio PILOT COPLT PASS ICS Keys Mode Operation Pilot Isolate Mode In ‘Pilot Isolate’ mode the Pilot, Copilot, and Passengers hear the aircraft audio. The Copilot and Passengers also hear each other. Aircraft Audio PILOT COPLT PASS ICS Keys 190-01134-12 Rev. G Mode Operation Garmin GMA 350/350c Pilot’s Guide 17 GMA 350/350c Audio Panel Passenger/Crew Isolate Mode In ‘Passenger/Crew Isolate’ mode the Pilot and Copilot hear the aircraft audio and each other. The Passengers hear each other. Aircraft Audio PILOT ICS Keys COPLT PASS Mode Operation Copilot Isolate Mode In ‘Copilot Isolate’ mode the Pilot and Passengers hear the aircraft audio and each other. The Copilot has the option to use Split-COM mode. Split-COM Mode (Optional) Aircraft Audio COPLT PILOT PASS ICS Keys 18 Mode Operation Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel All Isolate Mode In ‘All Isolate’ mode the Pilot hears the aircraft audio. The Copilot has the option to use Split-COM mode. The Passengers hear each other. Split-COM Aircraft Audio (Optional) PILOT ICS Keys COPLT PASS Mode Operation Pilot & Copilot Isolate Mode In ‘Pilot & Copilot Isolate’ mode the Pilot and Passengers hear the aircraft audio. The Copilot has the option to use Split-COM mode. Aircraft Audio PILOT ICS Keys 190-01134-12 Rev. G PASS Split-COM (Optional) COPLT Mode Operation Garmin GMA 350/350c Pilot’s Guide 19 GMA 350/350c Audio Panel Pilot & Passenger Isolate Mode In ‘Pilot & Passenger Isolate’ mode the Pilot and Copilot hear the aircraft audio. The Passengers hear each other. Aircraft Audio PILOT ICS Keys PASS COPLT Mode Operation Copilot & Passenger Isolate Mode In ‘Copilot & Passenger Isolate’ mode the Pilot can hear the aircraft audio. The Copilot has the option to use Split-COM mode. The Passengers hear each other. Split-COM Aircraft Audio (Optional) PILOT ICS Keys 20 COPLT PASS Mode Operation Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Intercom Volume and Squelch The VOL/CRSR Knob controls selection and volume or manual squelch adjustment for audio sources that may not be adjustable anywhere else in the system. The small knob controls the volume or squelch. Turning the large knob activates and/or moves the cursor (flashing white annunciator/ or flashing blue annunciator in Blue-Select Mode) to select the audio source to adjust. The cursor will time-out after a few seconds and the position of the cursor will always default back to the PILOT Key. Pressing the small knob cancels the cursor. Blue-Select Mode (Telephone/Entertainment Distribution) The music (MUS1/MUS2) and telephone/entertainment ( ) audio are distributed using the Blue-Select Mode. The following example indicates that the pilot, copilot, and passengers will all hear the telephone/entertainment audio. Blue-Select Mode (Telephone/Entertainment Distribution) The Blue-Select Mode is entered by pressing the small knob when the volume control cursor (flashing white annunciator) is not active. If the volume control cursor is active, press the small knob twice. The first press will cancel the volume control cursor, the second will activate Blue-Select Mode. 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 21 GMA 350/350c Audio Panel The annunciator over the Key will be flashing blue. Any combination of the annunciators over the PILOT, COPLT, and PASS buttons may be blue. Select the desired button to turn the blue annunciator on or off to distribute the telephone/entertainment audio to selected crew/passenger positions. Turn the large knob to select MUS1 or MUS2 and select the crew positions to receive the music audio. Selecting any key other than PILOT, COPLT, PASS, MUS1, MUS2, will cancel Blue-Select Mode. Pressing the small knob will or also cancel Blue-Select Mode. After approximately 20 seconds with no input, the Blue-Select Mode will automatically cancel. Adjusting Intercom Volume When the cursor is on PILOT, COPLT, or PASS, the Volume Control Knob adjusts the intercom volume for the listener. Adjusting Manual Squelch When the cursor is on MAN SQ, the Volume Control Knob adjusts the ICS Squelch Threshold (the volume level that must be exceeded to be heard over the intercom). Adjusting Speaker Volume When the cursor is on SPKR, the Volume Control Knob adjusts the speaker volume of the selected sources (COM, NAV, AUX, MKR). Adjusting MKR, AUX, , and MUSIC Volume When the cursor is on MKR, AUX, , MUS1 or MUS2, the Volume Control Knob adjusts the individual volume of the selected source. 22 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Manual Squelch Annunciator; Off for Automatic Squelch, On Relative Volume/ for Manual Squelch Squelch Scale Volume or Manual Squelch Cursor Volume/Squelch Control Speaker All of the radios can be heard over the cabin speaker. Pressing the SPKR Key selects and deselects the cabin speaker. Speaker audio is muted when the PTT is pressed. Certain aural alerts and warnings (autopilot, traffic, altitude) are always heard on the speaker, even when the speaker is not selected. Speaker Key Passenger Address Mode (PA Mode) Press and hold the SPKR Key for 2 seconds to initiate Passenger Address Mode. PA Mode is annunciated by a rapid blinking of the SPKR annunciator. When in PA Mode the crew can use the PTT “Pushto-Talk” button to deliver announcements over the speaker, to the passenger headsets, or both depending on configuration. 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 23 GMA 350/350c Audio Panel Split-PA Mode During Split-PA Mode the pilot can continue to use the radio(s) while the copilot delivers PA announcements. To initiate Split-PA Mode, first enter Split-COM Mode by pressing both MIC Keys simultaneously, then press and hold the SPKR Key for 2 seconds. 3D Audio 3D Audio is useful when multiple audio sources are present. By using different responses in each ear, 3D audio processing creates the illusion that each audio source is coming from a unique location or seat position. Because this feature uses different signals for left and right channels, it requires wiring for stereo intercom and stereo headsets. If 3D audio is activated when mono headsets are in use, the listener will still hear all audio sources; however, there is no benefit from location separation. With a single COM selected and 3D Audio enabled, the listener hears the audio source at the 12 o’clock position. If both COMs are selected, the listener hears COM1 at 11 o’clock and COM2 at the 1 o’clock position. All other intercom positions are processed to sound like their relative seat location. By default, the GMA 350/350c assumes the pilot sits in the left seat. A Garmin authorized service center can make changes to the default configuration. Enabling 3D Audio Press and hold the PILOT Key to toggle 3D audio processing on and off for all headset positions. When 3D Audio is enabled, the aural message “3D audio left” is heard in the left ear followed by “3D audio right” in the right ear. If the aural messages are not heard in only the left and then the right ear respectively, the cause may be aircraft wiring or headset settings. Refer to the following table if a headset or aircraft wiring problem is suspected. 24 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel 3D Audio Troubleshooting Cause(s) Solution(s) 1) Mono headset in use 1) Use a stereo headset Symptom(s) “3D audio left” message heard in both 2) Stereo headset in use ears. with mono/stereo switch set to ‘mono’ “3D audio right” message 3) Aircraft wiring has not heard left audio wired to both left and right channels of stereo headset jack “3D audio 1) Mono headset in use left” message 2) Stereo headset in use heard in both with mono/stereo ears, followed switch set to mono by “3D audio 3) Incorrect aircraft right” message wiring (left/right heard in both shorted together) ears Symptom(s) Cause(s) “3D audio 1) Incorrect aircraft right” message wiring (right channel heard in both used for mono ears. “3D instead of left or left/ audio left” not right swapped) heard 190-01134-12 Rev. G 2) Set mono/stereo switch on headset to ‘stereo’ 3) If after checking solutions #1 and #2 see a service center as soon as possible to inspect/ correct wiring. This wiring fault can cause fail-safe audio not to function. 1) Use a stereo headset 2) Set mono/stereo switch on headset to ‘stereo’ 3) If after checking solutions #1 and #2 see a service center as soon as possible to inspect/ correct wiring. This wiring fault can cause fail-safe audio not to function. Solution(s) 1) See a service center as soon as possible to inspect/correct wiring. This wiring fault can cause fail-safe audio not to function. Garmin GMA 350/350c Pilot’s Guide 25 GMA 350/350c Audio Panel 3D Audio Troubleshooting “3D audio 1) Stereo headset is on 1) Verify correct orientation from left” message backwards the left/right indication on heard in each side of the headset or right ear only the position of the boom MIC followed by (usually attached on left side). “3D audio If the headset is backwards, the right” message left/right position information heard in left will be swapped. ear only 2) See a service center as soon 2) Incorrect aircraft as possible to inspect/correct wiring (left/right channels swapped) wiring. This wiring fault can cause fail-safe audio not to function. 1) Aircraft wired for 1) See a service center to wire the “3D audio mono intercom installation for stereo headsets. left” message heard in left ear only, no audio heard in right ear. 1) See a service center as soon “3D audio 1) Incorrect aircraft wiring (right channel as possible to inspect/correct right” message wiring. This wiring fault can used for mono heard in right cause fail-safe audio not to ear only, no instead of left, or left/ right swapped) function. audio heard in left ear 3D Audio Troubleshooting Clearance Recorder and Player The GMA 350/350c contains a digital clearance recorder that records up to 2.5 minutes of the selected COM radio signal. Recorded COM audio is stored in separate memory blocks. Once 2.5 minutes of recording time have been reached, the recorder begins recording over the stored memory blocks, starting from the oldest block. 26 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Pressing the PLAY Key once plays the latest recorded memory block. The Play function can also be accessed via Voice Recognition commands. Refer to the ‘Voice Recognition’ section for more information. Pressing the MKR/MUTE Key during play of a memory block stops play. If a COM signal is detected during play of a recorded memory block, play is halted. Pressing the PLAY Key while audio is playing begins playing the previously recorded memory block. Each subsequent press of the PLAY Key selects the previously recorded memory block. Powering off the unit automatically clears all recorded blocks. Stops Play Marker Mute Key Voice Recognition Voice Recognition allows the pilot (and optionally copilot) to control the GMA 350/350c using spoken commands. To activate Voice Recognition, push and hold the Push-to-Command (PTC) button while speaking a command. When the Push-to-Command button is released, the GMA 350/350c will respond. If a command is correctly interpreted by the GMA 350/350c, a positive acknowledgement chime will be played, and the pilot should verify that the correct button selection is indicated by the triangular annunciator lights. Alternatively, some commands will be indicated by a voice response from the GMA 350/350c. If the desired modes are not indicated by annunciator lights or a voice response, the pilot should repeat the command by using the Push-to-Command button, or by manually using the front panel controls of the GMA 350/350c. 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 27 GMA 350/350c Audio Panel If a command is incorrectly interpreted by the GMA 350/350c, a negative acknowledgement tone will be played. The pilot should repeat the command by using the Push-to-Command button, or by manually using the front panel controls of the GMA 350/350c. In the event of any abnormal Voice Recognition operation, the front panel controls may be used to override Voice Recognition and manually control the GMA 350/350c. The following table lists the available Voice Recognition commands, the associated actions, and the voice response if applicable: Control Example Phrase “COM one” “MIC one” “COM one MIC” “COM two” “MIC two” “COM two MIC” “Split COM” COM “Monitored COM mute” OR “Mute Monitored COM” NAV AUX 28 “Disable monitored COM mute” “Monitored COM mute disable” “Disable mute monitored COM” OR “Mute monitored COM disable” “NAV one” “NAV two” “AUX” OR “Auxiliary” Action Toggles COM1 audio Selects MIC1/COM1 audio Selects MIC1/COM1 audio Toggles COM2 audio Selects MIC2/COM2 audio Selects MIC2/COM2 audio Selects split COM mode Mutes monitored COM on primary COM reception (refer to Page 8). Voice Response: “Monitor mute enable”. Disables monitored COM mute on primary COM reception (refer to Page 8). Voice Response: “Monitor mute disable”. Toggles NAV1 audio Toggles NAV2 audio Toggles AUX audio Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Control MUSIC 190-01134-12 Rev. G Example Phrase “Telephone” “Phone” OR “Jack” “Telephone mute” “Mute telephone” “Phone mute” “Mute phone” “Jack mute” OR “Mute Jack” “Disable telephone mute” “Mute telephone disable” “Disable phone mute” “Mute phone disable” “Disable jack mute” “Mute jack disable” “Telephone mute disable” “Disable mute telephone” “Phone mute disable” “Disable mute phone” “Jack mute disable” OR “Disable mute jack” “MUSIC one” “MUSIC two” “MUSIC one mute” OR “Mute MUSIC one” “Disable MUSIC one mute” “MUSIC one mute disable” “Disable mute MUSIC one” OR “Mute MUSIC one disable” Action Toggles (TEL/JACK) input Mutes TEL/JACK on radio reception. Voice Response: “Tel and jack mute enable”. Disables TEL/JACK mute on radio reception. Voice Response: “Tel and jack mute disable”. Toggles MUS1 input Toggles MUS2 input Mutes MUS1 on radio reception Voice Response: “Music one mute enable” Disables MUS1 mute on radio reception. Voice Response: “Music one mute disable”. Garmin GMA 350/350c Pilot’s Guide 29 GMA 350/350c Audio Panel Control Example Phrase “MUSIC two mute” OR “Mute MUSIC two” MUSIC ICS Isolation “Disable MUSIC two mute” “MUSIC two mute disable” “Disable mute MUSIC two” OR “Mute MUSIC two disable” “Pilot” “Copilot” “Passenger” OR “Pass” “Passenger mute” “Pass mute” “Mute passenger” OR “Mute pass” “Disable passenger mute” “Disable pass mute” “Disable mute passenger” “Disable mute pass” “Passenger mute disable” “Pass mute disable” “Mute passenger disable” OR “Mute pass disable” “Copilot is passenger” OR “Copilot is pass” Copilot Configuration “Copilot is crew” 30 Action Mutes MUS2 on radio reception. Voice Response: “Music two mute enabled”. Disables MUS2 mute on radio reception. Voice Response: “Music two mute disabled”. Toggles PILOT button Toggles COPLT button Toggles PASS button Mutes passengers during radio reception. Voice Response: “Passenger mute enable”. Disables muting of passengers during radio reception. Voice Response: “Passenger mute disable”. Configures Copilot as a passenger. Voice Response: “Copilot as passenger”. Configures Copilot as flight crew. Voice Response: “Copilot as crew”. Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Control Example Phrase Action “Manual squelch” OR Toggles manual squelch mode “Man squelch” “Manual squelch threshold up” “Man squelch threshold up” Increases manual squelch “Manual squelch volume up” threshold OR Manual “Man squelch volume up” Squelch “Manual squelch threshold down” “Man squelch threshold down” Decreases manual squelch “Manual squelch voume down” threshold OR “Man squelch volume down” NOTE: Finer manual squelch adjustment may be made using the dual concentric knobs on the GMA 350/350c. The voice command “Up” or “Down” is equivalent to three clicks of the inner knob. Speaker (SPKR) “Speaker” Toggles SPKR on/off PA “P - A” Toggles PA on/off “Marker” Same action as pressing MKR/ Marker Beacon “Mute marker” OR MUTE (refer to page 4). (MKR/MUTE) “Marker mute” “Play” Same action as pressing PLAY COM Clearance “Read back” OR (refer to page 5). Recorder “Say again” “Cursor off” Cancels cursor when cursor is “Cursor cancel” OR Cursor flashing “Cancel cursor” “(Desired selection*) volume Increases volume of desired up” selection Volume Adjustments “(Desired selection*) volume Decreases volume of desired down” selection 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 31 GMA 350/350c Audio Panel Control Example Phrase Action Volume Displays the current volume but “(Desired selection*) volume Adjustments does not change it * Desired selection = “Speaker”, “pilot”, “copilot”, “passenger”, “pass”, “marker”, “aux”, “auxiliary”, “telephone”, “phone”, “jack”, “music one”, or “music two”. NOTE: Finer volume adjustment may be made using the dual concentric knobs on the GMA 350/350c. The voice command “Up” or “Down” is equivalent to three clicks of the inner knob. “Distribute telephone to (desired position(s) **)” OR “Distribute phone to (desired Distributes TEL/JACK to desired position(s) **)” positions. Distribution OR (Blue Mode) “Distribute jack to (desired position(s) **)” “Distribute music one to (desired Distributes MUS1 to desired position(s) **)” position(s) “Distribute music two to (desired Distributes MUS2 to desired position(s)**)” position(s) ** Desired position(s) = “All”, “none”, “pilot”, “copilot”, “passenger”, “pass”, or any combination of pilot, copilot, passenger, or pass. NOTE: The word “to” may be omitted from distribution phrases. Enables 3D audio (refer to page 21) “Three-D audio” Voice Response: “Three-D audio left, three-D audio right” 3D Audio Enables standard audio (disables 3D audio) “Standard audio” Voice Response: “Standard Audio” Voice Recognition Commands 32 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Entertainment Inputs The GMA 350/350c provides three stereo telephone/entertainment inputs: • The telephone/entertainment ( ) Key controls a telephone or entertainment device connected to the rear of the audio panel or to the Front Panel Jack. • The MUS1 and MUS2 Key controls the Entertainment Music audio input. The Front Panel Jack can be used as an entertainment input or a telephone input (in which case, it operates simultaneously with the rear telephone interface). The Front Panel Jack is a 3.5-mm stereo jack that is compatible with popular portable entertainment devices such as MP3s, CD players, and cell phones. The headphone outputs of the entertainment devices are plugged into the Front Panel Jack. Distribution of the entertainment inputs are configured in Blue-Select Mode. Blank Page Telephone and Entertainment Muting Telephone and entertainment muting can be enabled or disabled by the user, however it is always muted during alerts. Enabling/Disabling Muting Press and hold the MUS1, MUS2, or ( ) Key for two seconds to toggle muting on and off. The aural message “Music 1 Mute Enable/ Disable”, “Tel Mute Enable/Disable”, or “Bluetooth Mute Enabled/ Disabled” is heard. 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 33 GMA 350/350c Audio Panel Bluetooth® (GMA 350c Only) NOTE: Pairing is only necessary during the first attempt to connect a Bluetooth device to the GMA 350c. Once paired, the GMA 350c and the device will connect automatically. Pairing a Bluetooth Device with the GMA 350c Press and hold the inner knob for two seconds. The Bluetooth Annunciator flashes to indicate the unit is discoverable and the aural message “Bluetooth discoverable” is heard. The GMA 350c will remain discoverable for 90 seconds or until a successful pair is established. Once paired, the Bluetooth Annunciator turns steady blue and the aural message “Bluetooth connected/paired” is heard. Assigning an Audio Source to the Bluetooth Device Press the , MUS1, or MUS2 key until the annunciator turns blue (the audio from the Bluetooth source will not be heard until this step is complete). The key annunciator cycles OFF-WHITE-BLUE. WHITE selects the wired audio source. BLUE selects the Bluetooth audio source. The BLUE source assignment will persist through Bluetooth audio connection disruptions. NOTE: The Bluetooth audio can only be assigned to one source at a time. Once the Bluetooth audio is assigned to an audio source, the remaining entertainment audio sources will only cycle between OFF and WHITE. Bluetooth audio will maintain a separate volume level and Blue Select distribution from the wired audio source. If the Bluetooth connection is supporting a phone call, all intercom positions listening to that source can also speak on the call through the headset MICs. 34 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel Additional Bluetooth Control Functions In addition to the 2 second press and hold of the inner knob discussed above, the knob has two additional functions that are intended to be seldom or never used. The following functions are available if needed for troubleshooting: • Press and hold the inner knob for 5 seconds to turn off the Bluetooth radio. The aural message “Bluetooth off” is heard. This function electrically turns off the radio, not just the audio source selection. In the event that Bluetooth radio interference with communication or navigation equipment is suspected, the Bluetooth radio can be powered off without powering off the entire audio panel. A subsequent 5 second press and hold turns the radio back on. • Press and hold the inner knob for 10 seconds to clear the memory of paired devices (up to 10 are stored). Once cleared, the aural message “Bluetooth list cleared” is heard. This function is used as a troubleshooting method when a device is not pairing, or to remove a device that is no longer needed. Connecting Bluetooth to a Garmin VIRB The GMA 350c supports Bluetooth wireless delivery of pilot headphone audio to versions of the Garmin VIRB action camera that support Bluetooth mic audio input for recording. Pairing a Garmin VIRB to the GMA 350c works like pairing other Bluetooth audio devices. Once connected, pilot headphone audio will be delivered to the VIRB via Bluetooth. In a connection to the Garmin VIRB, the GMA is the source. Therefore, selecting an entertainment button is not required. The PILOT annunciator turns blue to indicate this connection. 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 35 GMA 350/350c Audio Panel Fail-Safe Operation If there is a failure of the GMA 350/350c or when power is not applied, a fail-safe circuit connects the pilot’s headset and microphone directly to the COM1 transceiver. Audio is not available on the speaker during Fail-safe operation. 36 Garmin GMA 350/350c Pilot’s Guide 190-01134-12 Rev. G GMA 350/350c Audio Panel 190-01134-12 Rev. G Garmin GMA 350/350c Pilot’s Guide 37 Garmin International, Inc. 1200 East 151st Street Olathe, KS 66062, U.S.A. Toll free: 800.800.1020 or 866.739.5687 p: 913.397.8200 f: 913.397.8282 Garmin AT, Inc. 2345 Turner Road SE Salem, OR 97302, U.S.A. Toll free: 800.525.6726 p: 503.391.3411 f: 503.364.2138 Garmin (Europe) Ltd Liberty House, Bulls Copse Road Hounsdown Business Park Southampton, SO40 9RB, U.K. Toll free (within U.K.) 0808.2380000 p: 44/0870.8501241 f: 44/0870.8501251 Garmin Corporation No. 68, Jangshu 2nd Road Shijr, Taipei County, Taiwan p: 886/2.2642.9199 f: 886/2.2642.9099 www.garmin.com © 2011, 2015 Garmin Ltd. or its subsidiaries 190-01134-12 Rev. G
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2015:11:12 13:50:19-06:00 Create Date : 2015:11:12 13:49:37-06:00 Metadata Date : 2015:11:12 13:50:19-06:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Document ID : uuid:be7b1cc1-534f-4fdf-921e-39a3d1e56130 Instance ID : uuid:a1c069e7-d7f8-4a5d-bb5a-ca24e0036f8c Producer : Adobe PDF Library 10.0.1 Page Count : 38 Creator : Adobe InDesign CS6 (Windows) Type : Info Trapped : FalseEXIF Metadata provided by EXIF.tools