Garmin 01738 GPS- Enabled Cycling Computer User Manual users manual 1

Garmin International Inc GPS- Enabled Cycling Computer users manual 1

Contents

users manual 1

Download: Garmin 01738 GPS- Enabled Cycling Computer User Manual users manual 1
Mirror Download [FCC.gov]Garmin 01738 GPS- Enabled Cycling Computer User Manual users manual 1
Document ID1335165
Application ID9Sb0zPXVNOdstoOTJiryQA==
Document Descriptionusers manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize76.21kB (952679 bits)
Date Submitted2010-08-30 00:00:00
Date Available2010-08-30 00:00:00
Creation Date2010-07-02 08:23:16
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2010-07-02 08:23:26
Document Titleusers manual 1
Document CreatorAdobe InDesign CS2 (4.0.5)

owner’s manual
EDGE® 800
GPS-ENABLED CYCLING COMPUTER
New cover
coming
soon....
© 2010 Garmin Ltd. or its subsidiaries
products.
All rights reserved. Except as expressly provided
herein, no part of this manual may be reproduced,
copied, transmitted, disseminated, downloaded
or stored in any storage medium, for any purpose
without the express prior written consent of Garmin.
Garmin hereby grants permission to download a
single copy of this manual onto a hard drive or
other electronic storage medium to be viewed and
to print one copy of this manual or of any revision
hereto, provided that such electronic or printed copy
of this manual must contain the complete text of
this copyright notice and provided further that any
unauthorized commercial distribution of this manual
or any revision hereto is strictly prohibited.
Garmin®, Garmin Training Center®, Auto Pause®,
Auto Lap®, Virtual Partner®, Edge®, are trademarks
of Garmin Ltd. or its subsidiaries, registered in
the USA and other countries. Garmin Connect™,
GSC™10, ANT™, and ANT+™ are trademarks of
Garmin Ltd. or its subsidiaries. These trademarks
may not be used without the express permission of
Garmin.
Information in this document is subject to change
without notice. Garmin reserves the right to change
or improve its products and to make changes in the
content without obligation to notify any person or
organization of such changes or improvements. Visit
the Garmin Web site (www.garmin.com) for current
updates and supplemental information concerning
the use and operation of this and other Garmin
Windows® is a registered trademark of Microsoft
Corporation in the United States and/or other
countries. Mac® is a registered trademark of Apple
Computer, Inc. Firstbeat and Analyzed by Firstbeat
are registered or unregistered trademarks of Firstbeat
Technologies Ltd. Other trademarks and trade names
are those of their respective owners.

Table of Contents
ANT+ Sensors.................... 20
About the Battery........................ 1
Installing the Edge...................... 2
Turning on the Edge................... 4
Acquiring Satellite Signals.......... 6
Optional ANT+ Sensors.............. 6
Going for a Ride......................... 7
Saving Your Ride Data............... 7
Using Free Software................... 7
Transferring History to Your
Computer ................................ 8
Tips for Pairing ANT+ Sensors
with Your Garmin Device........ 20
Putting on the Heart Rate
Monitor................................... 21
Using the Heart Rate Monitor... 22
Heart Rate Zones..................... 23
Replacing the Heart Rate
Monitor Battery....................... 24
Installing the GSC 10............... 25
Using the GSC 10.................... 28
Replacing the GSC 10
Battery.................................... 29
Third-Party ANT+ Sensors....... 30
ANT+ Sensor
Troubleshooting..................... 31
Getting Started..................... 1
Training with Your Edge...... 9
Alerts.......................................... 9
Using Auto Lap by Distance..... 10
Using Auto Lap by Position.......11
Using Auto Pause..................... 12
Using Auto Scroll...................... 12
Courses.................................... 13
Workouts.................................. 16
Edge 800 Owner’s Manual
History................................ 33
Viewing History......................... 33
Viewing Distance and Time
Totals...................................... 34
Deleting History........................ 34
Data Recording........................ 34
iii

Data Management.............. 35
Appendix............................ 47
Connecting the USB Cable ..... 35
Loading Files............................ 35
Deleting Files............................ 36
Index................................... 56
Customizing Your Data
Fields..................................... 37
Data Fields............................... 38
Changing Your System
Settings.................................. 41
Changing Your User Profile
Settings.................................. 43
Updating Your Bike Profile........ 43
Switching Bikes........................ 44
Changing the Start Notice........ 44
Speed Zones............................ 44
GPS Settings............................ 45
Setting Elevation Points........... 46
Settings.............................. 37
Registering Your Device........... 47
About the Edge......................... 47
Updating the Software.............. 47
Contacting Garmin Product
Support.................................. 47
Using the Backlight................... 48
Buying Optional Accessories.... 48
Specifications........................... 48
Wheel Size and
Circumference........................ 51
Activity Classes........................ 53
Troubleshooting........................ 54
iv
Edge 800 Owner’s Manual
Introduction
Setting Up the Device
NOTE: The Edge will not charge when
outside the temperature range of 32°F
to 122°F (0°C to 50°C).
Device Overview
Keys
 warning
Always consult your physician before
you begin or modify any exercise
program. See the Important Safety
and Product Information guide in the
product box for product warnings and
other important information.
Introduction
The Edge is powered by a built-in,
lithium-ion battery that you can charge
using the AC charger or the USB cable
included in the product box.
When using your Edge® the first
time, follow the setup instructions
in the Edge 800 Quick Start
Manual.
About the Battery
 warning
This product contains a lithium-ion
battery. See the Important Safety and
Product Information guide in the
product box for product warnings and
other important information.
Edge 800 Owner’s Manual
Introduction
Manual Conventions
Press to create a new lap.
Press and hold to reset
the timer.
START/
STOP
Press to start and stop
the timer.
LAP/RESET
Press and hold to turn the
device on and off.
Press to view the status
page and adjust the
backlight.
Edge 800 Owner’s Manual
D
Introduction
Edge 800 Owner’s Manual
D
Introduction
Edge 800 Owner’s Manual
Training with Your Edge
Training with Your
Edge
3. After completing your ride, press
STOP.
Saving Your Ride Data
Going for a Ride
Press and hold RESET to save
your ride data and reset the timer.
Alerts
You can use Edge alerts to train toward
specific time, distance, calorie, heart
rate, cadence, and power goals.
1. Press and hold MENU to view the
timer page.
Before you can record history, you
must acquire satellite signals.
Using Time, Distance, and
Calorie Alerts
1. Press and hold MENU.
2. Select Training > Alerts.
3. Select Time Alert, Distance Alert,
or Calorie Alert.
4. Turn on the alert.
5. Enter a time, distance, or calorie
amount.
6. Go for a ride.
Each time you reach the alert amount,
2. Press START to start the timer.
History is only recorded while the
timer is running.
Edge 800 Owner’s Manual
Training with Your Edge
Note: To turn on audible tones for
messages, see page 49.
Note: To turn on audible tones for
messages, see page 49.
1. Press and hold MENU.
2. Select Training > Alerts.
3. Select an option:
• Select HR Alert to set the
minimum and maximum heart
rate in beats per minute (bpm).
note: For more information
about heart rate zones and
settings, see page 19.
Using Advanced Alerts
If you have an optional heart rate
monitor, GSC 10, or third-party ANT+
power sensor, you can set up advanced
alerts.
• Select Cadence Alert to set the
fast and slow cadence amounts
in revolutions of the crank arm
per minute (rpm).
• Select Power Alert to set the
minimum and maximum power
amounts in watts.
4. Go for a ride.
Each time you exceed or drop below
the specified heart rate, cadence, or
power amount, the Edge beeps and
displays a message.
the Edge beeps and displays a message.
Edge 800 Owner’s Manual
Training with Your Edge
Courses
1. Press and hold MENU.
2. Select Training > Courses > New.
3. Select a previous ride on which to
base your course.
The Edge assigns a default name
to your new course that appears in
the list.
4. Select the course from the list.
5. Select Edit Course to rename the
course.
6. Enter a descriptive course name
in the top field (for example,
18mi_Ridgeview).
Courses allow you to train using a
previously recorded activity. You can
follow the course trying to match
or exceed previously set goals. For
example, if the original course was
completed in 30 minutes, you will
race against a Virtual Partner® trying
to complete the course in under 30
minutes.
Creating Courses with Your
Edge
Before you can create a course, you
must have history with GPS track data
saved to the Edge.
Garmin recommends that you use
Garmin Connect or Garmin Training
Center (page 31) to create courses. You
can then transfer the courses to your
Edge (page 37).
Course Points
You must use Garmin Training
Center to add course points to any
course. You can add course points, or
places on your course that you want
to remember, such as water stops or
distance goals.
Edge 800 Owner’s Manual
Training with Your Edge
7. Press PAGE to view the data pages:
Starting a Course
1. Press and hold MENU.
2. Select Training > Courses.
3. Select the course from the list.
4. Select an option:
• Select Do Course.
• Select Map to preview the
course, and press BACK to
return to the course list.
• Select Profile to preview the
elevation profile, and press
BACK to return to the course
list.
5. Press START.
History is recorded even if you are
not on the course. The “Course
Complete” message appears when
you finish.
6. Go for a ride.
Edge 800 Owner’s Manual
T
Training with Your Edge
You
Virtual
Off Course Options
You can include a warmup before you
begin your course. Press START to
begin the course, and then warm up as
normal. Stay away from your course
path as you warm up. When you are
ready to begin, head toward your
course. When you are on any part of
the course path, the Edge displays an
“On Course” message.
If you stray away from the course,
the Edge displays an “Off Course”
message. Use the course map or course
points to find your way back to the
course.
Note: As soon as you press START,
your Virtual Partner starts the course
and does not wait for you to warm up.
Edge 800 Owner’s Manual
Training with Your Edge
Deleting a Course
1. Press and hold MENU.
2. Select Training > Courses.
3. Select a course.
4. Select Delete Course > Yes.
Workouts
You can use the Edge to create
workouts that include goals for each
workout step and for varied distances,
times, and rest laps. After you create a
workout, you can use Garmin Connect
or Garmin Training Center to schedule
the workout for a particular day. You
can plan workouts in advance and store
them on your Edge.
Changing the Course Speed
1. Press and hold MENU.
2. Select Training > Courses.
3. Select the course from the list.
4. Select Do Course.
5. Press LIGHT.
6. Use▼ and ▲ to adjust the
percentage of time to complete the
course.
For example, to improve your
course time by 20%, enter a course
speed of 120%. You will race
against the Virtual Partner to finish
a 30-minute course in 24 minutes.
Stopping a Course
Press and hold MENU, and select
Training > Stop Course.
10
Edge 800 Owner’s Manual
Training with Your Edge
1. Press and hold MENU.
2. Select Training > Workouts >
New.
3. Enter a descriptive workout name
in the top field (for example,
QUICK 10).
4. Select Add New Step.
5. Select Duration to specify how the
step will be measured.
For example, select Distance to end
the step after a specific distance.
If you select Open, you can press
LAP to end the step during your
workout.
6. If necessary, enter a value in the
field below Duration.
7. Select Target to choose your goal
during the step.
For example, select Heart Rate
to maintain a consistent heart rate
during the step.
8. If necessary, select a target zone or
enter a custom range.
For example, you can select a heart
rate zone. Each time you exceed
or drop below the specified heart
rate, the Edge beeps and displays a
message.
9. If necessary, select Yes in the Rest
Lap field.
During a rest lap, the timer
continues to run and data is
recorded.
10. Press BACK to continue.
11. Repeat steps 4–9 to add another
new step.
Creating Workouts
Garmin recommends that you use
Garmin Connect or Garmin Training
Center (page 31) to create workouts.
You can then transfer the workouts to
your Edge (page 37). However, you
can also create and save a workout
directly on your Edge.
Edge 800 Owner’s Manual	11
Training with Your Edge
1. Select Add New Step.
2. In the Duration field, select an
option.
• Select Repeat to repeat a step
one or more times.
For example, you can repeat a
5-mile step ten times.
• Select Repeat Until to repeat a
step for a specific duration.
For example, you can repeat a
5-mile step for 60 minutes or
until your heart rate reaches 160
bpm.
3. In the Back To Step field, select a
step to repeat.
4. If necessary, select Yes in the Rest
Lap field.
5. Press BACK to continue.
Starting a Workout
1. Press and hold MENU.
2. Select Training > Workouts.
3. Select the workout.
4. Select Do Workout.
5. Press START.
6. Go for a ride.
7. Press PAGE to view the data pages:
After you begin a workout, the Edge
displays each step of the workout,
the goal (if any), and current workout
data. An audible alarm sounds when
you are about to finish a workout step.
A message appears, counting down
the time or distance until a new step
begins.
Repeating Workout Steps
Before you can repeat a workout step,
you must create a workout with at least
one step.
12
Ending a Step
Press LAP to end a step early.
Edge 800 Owner’s Manual
Training with Your Edge
About Editing Workouts
You can edit workouts within Garmin
Connect, Garmin Training Center,
or directly in the Edge. If you edit
workouts in the Edge, your changes
may be temporary. Garmin Connect
and Garmin Training Center serve as
the master list of workouts. If you edit
a workout in the Edge, the changes
might be overwritten the next time
you transfer workouts from Garmin
Connect or Garmin Training Center.
To make a permanent change to a
workout, edit the workout in Garmin
Connect or Garmin Training Center
and then transfer it to your Edge.
Editing a Workout Using the
Edge
1. Press and hold MENU.
2. Select Training > Workouts.
3. Select the workout.
4. Select Edit Workout.
5. Select the step.
6. Select Edit Step.
7. Make any necessary changes, and
press BACK to continue.
8. Press BACK to save and to exit.
Stopping a Workout
1. Press STOP to stop the timer.
2. Press and hold RESET to save your
ride data and reset the timer.
Deleting a Workout
1. Press and hold MENU.
2. Select Training > Workouts.
3. Select the workout.
4. Select Delete Workout > Yes.
Edge 800 Owner’s Manual	13
D
Training with Your Edge
14
Edge 800 Owner’s Manual
D
Training with Your Edge
Edge 800 Owner’s Manual	15
D
Training with Your Edge
16
Edge 800 Owner’s Manual
ANT+ Sensors
The Edge is compatible with the
following ANT+ accessories:
• Heart rate monitor (page 18)
• GSC 10 speed and cadence sensor
(page 22)
• Third-party ANT+ sensors
(page 26)
For information about purchasing
additional accessories, go to
http://buy.garmin.com.
ANT+ Sensors
sensors.
• Bring the Garmin device within
range (3 m) of the ANT+ sensor.
• After you pair the first time, your
Garmin device automatically
recognizes the ANT+ sensor each
time it is activated. This process
occurs automatically when you
turn on the Garmin device and
only takes a few seconds when
the sensors are activated and
functioning correctly.
• When paired, your Garmin device
only receives data from your
sensor, and you can go near other
sensors.
Tips for Pairing ANT+
Sensors with Your Garmin
Device
• Make sure that the ANT+ sensor
is compatible with your Garmin
device.
• Before you pair the ANT+ sensor
with your Garmin device, move
10 m away from other ANT+
Edge 800 Owner’s Manual	17
ANT+ Sensors
Putting on the Heart Rate
Monitor
Wear the heart rate monitor directly on
your skin, just below your breastplate.
It should be snug enough to stay in
place during your ride.
1. Connect the heart rate monitor
module ➊ to the strap.
The Garmin logo should be rightside up.
4. Bring the device within range (3 m)
of the heart rate monitor.
TIP: If the heart rate data is erratic
or does not appear, you may have to
tighten the strap on your chest or warm
up for 5–10 minutes.
After you put on the heart rate monitor,
it is on standby and ready to send data.
Paring the Heart Rate
Monitor
➊
2. Wet both electrodes ➋ on the
back of the strap to create a strong
connection between your chest and
the transmitter.
➋
3. Wrap the strap around your chest,
and connect it.
18
If you purchaced a heart rate monitor
separately, you must pair it with the
Edge in order to view your heart rate
data.
1. Turn on the Edge.
2. Bring the Edge within range (3 m)
of the heart rate monitor.
Edge 800 Owner’s Manual
ANT+ Sensors
1. Select MENU > > Bike
Settings > Heart Rate > Heart
Rate Zones.
2.
Heart Rate Settings
3. Select MENU > > Bike
Settings > Heart Rate > ANT+
Heart Rate.
4. Select Heart Rate Monitor > Yes
> Rescan.
6. Press Power.
When the heart rate monitor is
paired, a message appears and the
heart rate icon appears solid on
the status page.
7. If necessary, customize heart rate
data fields (page 39).
Tip: If heart rate data does not appear
or if you have erratic heart rate data,
you may have to tighten the strap on
your chest or warm up for 5 to 10
minutes (see page 28).
your ride, set your maximum heart rate,
resting heart rate, and heart rate zones.
Setting Your Heart Rate Zones
The Edge uses your user profile
information from the initial setup to
determine your heart rate zones. For
the most accurate calorie data during
Edge 800 Owner’s Manual	19
ANT+ Sensors
Heart Rate Zones
80% to 90%
90% to 100%
70% to 80%
Beginning-level aerobic
training; reduces stress
Basic cardiovascular
training; good recovery
pace
Improved aerobic capacity;
optimal cardiovascular
training
Improved anaerobic
capacity and threshold;
improved speed
Anaerobic and muscular
endurance; increased
power
Relaxed, easy pace; rhythmic
breathing
Comfortable pace; slightly
deeper breathing, conversation
possible
Moderate pace; more difficult to
hold conversation
60% to 70%
Benefits
Fast pace and a bit
uncomfortable; breathing
forceful
Sprinting pace, unsustainable
for long period of time; labored
breathing
Perceived Exertion
% of Maximum
Heart Rate or
Resting Heart
Rate
50% to 60%
20
Edge 800 Owner’s Manual
ANT+ Sensors
 caution
Consult your physician to specify heart
rate zones that are appropriate for your
fitness level and health condition.
Replacing the Heart Rate
Monitor Battery (SS)
The heart rate monitor contains a
user‑replaceable CR2032 battery.
Many athletes use heart rate zones
to measure and increase their
cardiovascular strength and improve
their level of fitness. A heart rate zone
is a specified range of heartbeats per
minute. The five commonly accepted
heart rate zones are numbered from 1
to 5 according to increasing intensity.
cardiovascular capacity and
strength.
• Knowing your heart rate zones can
prevent you from overtraining and
can decrease your risk of injury.
About Heart Rate Zones
Note: Contact your local waste
disposal department to properly
dispose of batteries.
How do heart rate zones affect your
fitness goals? Knowing your heart
rate zones can help you measure and
improve your fitness by understanding
and applying these principles:
• Your heart rate is a good measure of
exercise intensity.
• Training in specific heart rate
zones can help you improve
1. Locate the circular battery cover on
the back of the heart rate monitor.
2. Use a coin to twist the cover
counter-clockwise so the arrow on
the cover points to OPEN.
3. Remove the cover and battery.
4. Wait 30 seconds.
Edge 800 Owner’s Manual	21
ANT+ Sensors
Installing the GSC 10
note: If you do not have a GSC 10,
you can skip this step.
Both magnets must be aligned with
their respective indication lines for the
Edge to receive data.
1. Place the GSC 10 on the rear chain
stay (on the side opposite the drive
train).
NOTE: Place the flat rubber pad ➊
or the triangle-shaped rubber pad
between the GSC 10 and the chain
stay for stability.
5. Insert the new battery with the
positive side facing up.
Note: Be careful not to damage
or lose the O-ring gasket on the
cover.
6. Use a coin to twist the cover
clockwise so the arrow on the cover
points to CLOSE.
22
Edge 800 Owner’s Manual
ANT+ Sensors
➓
➍
➏
➊
➌
4. Unscrew the spoke magnet ➐ from
the plastic piece.
➋
➎
2. Loosely attach the GSC 10 using
two cable ties ➋.
3. Attach the pedal magnet ➌ to the
crank arm using the adhesive mount
and a cable tie ➍.
The pedal magnet must be
within 5 mm of the GSC 10. The
indication line ➎ on the pedal
magnet must line up with the
indication line ➏ on the GSC 10.
➐
➑
➒
Edge 800 Owner’s Manual	23
ANT+ Sensors
9. Pedal to test the sensor alignment.
The red LED blinks each time the
pedal magnet passes the sensor.
The green LED blinks each time
the spoke magnet passes the sensor
arm.
note: The LED blinks for
the first 60 passes after a reset.
Press Reset again if you require
additional passes.
10. When everything is aligned and
working correctly, tighten the cable
ties, the sensor arm, and the spoke
magnet.
When the GSC 10 is paired, a message
appears, and the
speed and
cadence icons appear solid on the
status page.
5. Place the spoke in the groove of the
plastic piece, and tighten it slightly.
The spoke magnet can face away
from the GSC 10 if there is not
enough room between the sensor
arm and the spoke. The spoke
magnet must line up with the
indication line ➑ on the sensor
arm.
6. Loosen the screw ➒ on the sensor
arm.
7. Move the sensor arm to within
5 mm of the spoke magnet.
You can also tilt the GSC 10 closer
to either magnet for improved
alignment.
8. Press the Reset key ➓ on the
GSC 10.
The LED turns red, then green.
24
Edge 800 Owner’s Manual
ANT+ Sensors
Using the GSC 10
the speed and distance.
Cadence is your rate of pedaling or
“spinning” measured by the number of
revolutions of the crank arm per minute
(rpm). There are two sensors on the
GSC 10: one for cadence and one for
speed.
For information about cadence alerts,
see page 6.
1. Turn on the Edge.
2. Bring the Edge within range (3 m)
of the GSC 10.
3. Press and hold MENU.
4. Select Settings > Bike Settings >
[Bike 1] > ANT+ Spd/Cad.
5. Select Yes > Rescan.
6. Press BACK to return to the main
menu.
When the GSC 10 is paired, a
message appears, and the
speed and cadence icons appear
solid on the status page.
7. Customize optional data fields
(page 39).
8. Go for a ride.
Non-Zero Averaging for
Cadence Data
The non-zero data-averaging setting
is available if you are training with an
optional cadence sensor. The default
setting is to exclude zero values that
occur when you are not pedaling.
About the GSC 10
Cadence data from the GSC 10 is
always recorded. If there is no GSC 10
paired, GPS data is used to calculate
To turn the non-zero averaging
on or off, select MENU > >
Bike Settings > Data Averaging >
Cadence.
Edge 800 Owner’s Manual	25
ANT+ Sensors
The GSC 10 contains a userreplaceable CR2032 battery.
Note: Contact your local waste
disposal department to properly
dispose of batteries.
2. Use a coin to twist the cover
counter-clockwise until it is loose
enough to remove (arrow points to
unlocked).
26
Unlocked
CR2032
battery
Battery
Battery
1. Locate the circular battery cover on
the side of the GSC 10.
3. Remove the cover and battery.
4. Wait 30 seconds.
5. Insert the new battery with the
positive side facing up.
Note: Be careful not to damage
or lose the O-ring gasket on the
cover.
6. Use a coin to twist the cover back
into place (arrow points to locked).
Replacing the GSC 10
Battery
Arrow
Third-Party ANT+ Sensors
For a list of third-party ANT+ sensors
that are compatible with the Edge, go
Edge 800 Owner’s Manual
ANT+ Sensors
to www.garmin.com/intosports.
Viewing Your Power Zones
You can set seven custom power zones
using Garmin Connect or Garmin
Training Center. If you know your
FTP (functional threshold power)
value, you can enter it and allow the
software to calculate your power zones
automatically.
1. Press and hold MENU.
2. Select Settings > Bike Settings >
[Bike 1] > Power Zones.
Calibrating Your Power Meter
For calibration instructions specific
to your power meter, refer to the
manufacturer’s instructions.
Pairing Your Power Meter
Refer to the manufacturer’s
instructions.
When the power meter is paired,
a message appears, and the
power icon appears solid on the
status page.
Before you can calibrate your power
meter, it must be properly installed and
actively recording data.
1. Select MENU > > Bike
Settings > Bike Profiiles.
2. Select a bike profile.
3. Selec ANT+ Power > Calibrate.
4. Keep your power meter active by
pedaling until a message appears.
Non-Zero Averaging for Power
Data
The non-zero data-averaging setting
is available if you are training with
an optional power meter. The default
setting is to exclude zero values that
occur when you are not pedaling.
To turn the non-zero averaging on
or off, select MENU > > Bike
Settings > Data Averaging > Power.
Edge 800 Owner’s Manual	27
ANT+ Sensors
ANT+ Sensor Troubleshooting
Solution
• Stay 10 m away from other ANT sensors while pairing.
• Bring the device within range (3 m) of the heart rate
monitor while pairing.
• If the problem persists, replace the battery.
I have a third-party
Make sure that it is compatible with the Edge (www.garmin
ANT+ sensor.
.com/intosports).
The heart rate monitor A smaller elastic strap is sold separately. Go to
strap is too big.
http://buy.garmin.com.
Problem
The ANT+ sensor
will not pair with my
device.
28
Edge 800 Owner’s Manual
ANT+ Sensors
Solution
• Make sure that the heart rate monitor is snug against your
body.
• Reapply moisture to the electrodes. Use water, saliva, or
electrode gel.
• Clean the electrodes. Dirt and sweat residue on the
electrodes can interfere with heart rate signals.
• Position the heart rate monitor on your back instead of your
chest.
• Wear a cotton shirt or wet your shirt if suitable for your
activity. Synthetic fabrics that rub or flap against the heart
rate monitor can create static electricity that interferes with
heart rate signals.
• Move away from sources of strong electromagnetic fields
and some 2.4 GHz wireless sensors, which can interfere
with your heart rate monitor. Sources of interference
may include high-voltage power lines, electric motors,
microwave ovens, 2.4 GHz cordless phones, and wireless
LAN access points.
Problem
The heart rate data is
inaccurate or erratic.
Edge 800 Owner’s Manual	29
History
History
Viewing History
Upload your history (page 31) to
Garmin Connect or Garmin Training
Center periodically to keep track of all
of your ride data.
1. Press and hold MENU.
2. Select History > Activities.
Your Edge automatically saves history
when the timer is started. The Edge can
save at least 180 hours of ride data with
typical use. When the Edge memory is
full, a message appears. The Edge does
not automatically delete or overwrite
your history. See page 32 to learn how
to delete history.
History includes time, distance,
calories, average speed, maximum
speed, altitude, and detailed lap
information. Edge history can also
include heart rate, cadence, and power.
3. Choose an option:
• Use ▼ and ▲ to scroll
through your activities.
• Select View More to view the
details for the entire ride or for
each lap.
note: History is not recorded while
the timer is stopped or paused.
30
Edge 800 Owner’s Manual
History
Transferring History to
Your Computer
Using Free Software
notice
To prevent corrosion, thoroughly
dry the mini-USB port, the weather
cap, and the surrounding area before
charging or connecting to a computer.
Press and hold MENU, and select
History > Totals to view the
accumulated ride distance and time.
1. Connect the USB cable to an
available USB port on your
computer.
2. Pull up the weather cap ➊ from the
mini-USB port ➋.
Garmin provides two software options
for storing and analyzing your ride
data:
Viewing Distance and
Time Totals
• Garmin Connect is Web-based
software.
• Garmin Training Center is
computer software that does
not require the Internet after
installation.
1. Go to www.garmin.com
/intosports.
2. Follow the on-screen instructions to
install the software.
➊
➋
3. Plug the small end of the USB
cable into the mini-USB port.
Edge 800 Owner’s Manual	31
History
Deleting History
Data Recording
The Edge uses smart recording. It
records key points where you change
direction, speed, or heart rate.
When a third-party power meter
(page 26) is paired, the Edge records
points every second. Recording points
every second uses more of the available
memory on the Edge, but creates a very
accurate record of your ride.
After you have transferred your history
to your computer, you may want to
delete the history from your Edge.
Note: This does not delete any
history.
4. Select Yes.
4. Open Garmin Connect
(www.garminconnect.com), or open
Garmin Training Center.
5. Follow the instructions included
with the software.
1. Press and hold MENU.
2. Select History > Delete.
3. Select an option:
• Select Indv. Activities to delete
one activity at a time.
• Select All Activities to delete all
ride data from the history.
• Select Old Activities to delete
activities recorded more than
one month ago.
• Select All Totals to reset the
ride distance and time totals.
32
Edge 800 Owner’s Manual
D
History
Edge 800 Owner’s Manual	33
Navigation
Navigation
Select Automotive Mode to show a
perspective view.
Insert advance organizer?
Map Setup Options
Include Map configuration stuff here
From the map, press menu, and select
Setup Map.
from 62 Map
Map Orientation—allows you to select
how the map appears (page 11).
Guidance Text—allows you to select
when to show guidance text on the
map.
The position icon represents your
location on the map. As you travel,
the position icon moves and leaves a
track log (trail). Waypoint names and
symbols also appear on the map.
Changing the Map Orientation
1. From the map, press MENU.
2. Select Setup Map > Orientation.
3. Select an orientation:
Select North Up to show north at the
top of the page.
Select Track Up to show your current
direction of travel at the top of the
page.
34
Advanced Map Setup
Auto Zoom—automatically selects the
appropriate zoom level for optimal use
on your map. When Off is selected,
you must zoom in or out manually.
Zoom Levels—map items draw or
appear at or below the selected zoom
level.
Text Size—allows you to select the text
size for map items.
Edge 800 Owner’s Manual
Navigation
Detail—allows you to select the
amount of map data displayed on the
device.
routable maps)— calculates on-road
routes that are shorter in distance.
note: Higher detail settings may cause
the map to redraw slowly.
Off Road Transitions
From the main menu, select Setup >
Routing.
Routing Settings
Lock On Road—locks the current
location marker on the nearest road,
compensating for variances in map
position accuracy (requires routable
maps).
Shaded Relief—shows detail relief
on the map (if available) or turns off
shading.
Calculates Routes for—allows you to
select a transportation method in order
to optimize your route.
Guidance Method—allows you
to select a guidance method for
calculating your route.
Off Road—calculates point-topoint
routes.
On Road For Time (requires routable
maps)—calculates onroad routes that
require minimal time to drive.
On Road For Distance (requires
Auto—automatically routes you to the
next point.
Manual—allows you to select the next
point on the route by using the point on
the active route page.
Distance—routes you to the next point
on the route when you are within a
specified distance of your current point.
Avoidance Setup (requires routable
maps)—allows you to select the road
Edge 800 Owner’s Manual	35
Navigation
type you want to avoid.
36
Edge 800 Owner’s Manual
Data Management
You can use the Edge as a USB mass
storage device.
Connecting the USB
Cable
Loading Files
After you have connected the device to
your computer, you can manually load
the following files to your Edge: .tcx,
.fit, and .crs.
note: The Edge is not compatible
with Windows® 95, 98, Me, or NT. It is
also not compatible with Mac® OS 10.3
and earlier.
Data Management
3. Plug the small end of the USB
cable into the mini-USB port.
Your device appears as a removable
drive in My Computer on Windows
computers and as a mounted
volume on Mac computers.
notice
To prevent corrosion, thoroughly
dry the mini-USB port, the weather
cap, and the surrounding area before
charging or connecting to a computer.
1. Connect the USB cable to a USB
port on your computer.
2. Pull up the weather cap from the
mini-USB port.
1. Browse your computer for the file.
2. Select Edit > Copy.
3. Open the “Garmin” drive or
volume.
4. Open the “NewFiles” folder.
5. Select Edit > Paste.
Edge 800 Owner’s Manual	37
Data Management
Deleting Files
Disconnecting the USB Cable
When you are finished managing your
files, you can disconnect the USB
cable.
NOTICE
Your device memory contains
important system files that should not
be deleted.
1. Open the Garmin drive or volume.
2. Select the file.
3. Press the Delete key on your
keyboard.
After you have connected the device
to your computer, you can manually
delete files.
1. Complete an action:
• For Windows computers, click
the eject icon
in your
system tray.
• For Mac computers, drag the
volume icon to the Trash .
2. Unplug the device from your
computer.
38
Edge 800 Owner’s Manual
Settings
Settings
To turn off an optional page, set the
number of data fields to zero.
4. Select the data field to change it.
5. Repeat steps 2 through 4 for each
page you want to customize.
Data fields (page 39)
Bike profiles (page 44)
Training settings (page 44)
System settings (page 46)
User Profile settings (page 49)
Data Field
Customizing Your Data
Fields
Data Fields
Data fields with the * symbol display
statute or metric units. Data fields with
the ** symbol require an ANT+ sensor.
•
•
•
•
•
You can customize the following
settings and features:
You can set up custom data fields for
three training data pages, the course
page, and the map.
1. Select MENU > > Bike
Settings > Data Fields.
2. Select one of the pages.
3. Select the number of data fields you
want to see on this page.
Description
Battery Level
The remaining battery
power.
Cadence **
Revolutions of the crank
arm per minute.
Cadence
– Avg. **
Average cadence for the
duration of your current
ride.
Cadence
– Lap **
Average cadence for the
current lap.
Calories
Amount of total calories
burned.
Edge 800 Owner’s Manual	39
Settings
Data Field
Description
Data Field
Description
Calories - Fat
Amount fat calories
burned.
ETA at Next
The estimated time of
day you will reach the
next waypoint on the
route.
GPS
Accuracy *
The margin of error for
your exact location. For
example, your GPS
location is accurate to
within +/- 12 feet.
Dist – Lap *
Distance traveled in the
current lap.
Dist. to Dest.
Distance to your final
destination.
Dist. to Go
The remaining distance
to your final destination
or goal.
Dist. to Next
The remaining distance
to the next point on the
route.
ETA at
Destination
40
GPS Signal
Strength
The strength of the
GPS satellite signal.
Grade
Calculation of rise over
run. For example, if for
every 10 feet you climb
(elevation) you travel
200 feet (distance), your
grade is 5%.
Heading
The direction you are
moving.
Heart Rate **
Heart rate in beats per
minute (bpm).
Elevation *
Distance traveled on the
current ride.
Distance *
Calories to Go Amount of remaining
calories when you are
using the calorie goal
feature.
Distance above or below
sea level.
The estimated time of
day you will reach your
final destination.
Edge 800 Owner’s Manual
Settings
Description
Data Field
Description
HR – %HRR
**
Percentage of heart rate
reserve (maximum heart
rate minus resting heart
rate).
HR – Lap
%Max. **
Average percentage of
maximum heart rate for
the lap.
HR – %Max.
**
Percentage of maximum
heart rate.
HR Graph **
Line graph showing your
current heart rate zone
(1 to 5).
HR – Avg. **
Average heart rate for
the ride.
HR to Go **
HR – Avg.
%HRR **
Average percentage
of heart rate reserve
(maximum heart rate
minus resting heart rate)
for the run.
The amount you are
above or below the
target heart rate or
zone?
HR – Avg.
%Max. **
Average percentage of
maximum heart rate for
the run.
HR – Lap **
Average heart rate in the
current lap.
HR Zone **
HR – Lap
%HRR **
Data Field
Average percentage
of heart rate reserve
(maximum heart rate
minus resting heart rate)
for the lap.
Current range of heart
rate (1 to 5). The default
zones are based on your
user profile, maximum
heart rate, and resting
heart rate.
Laps
Number of laps
completed.
Odometer
A running tally of
distance traveled for all
trips.
Power **
Current power output in
watts.
Edge 800 Owner’s Manual	41
Settings
Description
Data Field
Description
Power
- %FTP **
Current power output
in % FTP (functional
threshold power).
Power Zone
**
Power - 30s
Avg. **
The 30-second moving
average of power output.
Current range of power
output (1 to 7) based
on your FTP or custom
settings.
Speed *
Current speed.
Power - 3s
Avg. **
The three-second
moving average of
power output.
Speed
– Avg. *
Average speed for the
ride.
Power – Avg.
**
Average power output
for the duration of your
current ride.
Speed – Lap *
Average speed in the
current lap.
Power – kJ **
Total (cumulative)
amount of power output
in kilojoules.
Power – Lap
**
Average power output in
the current lap.
Power – Max.
**
Top power achieved
during the current ride.
Power
– Watts/kg **
Amount of power output
in watts per kilogram?
42
Data Field
Top speed achieved
during the current ride.
Sunrise
The time of sunrise
based on your GPS
position.
Sunset
The time of sunset
based on your GPS
position.
Speed
– Maximum *
Edge 800 Owner’s Manual
Settings
Description
Data Field
Description
Temperature *
Current temperature in
Fahrenheit or Celsius.
Note: The Edge may
display temperature
readings that are
higher than the actual
air temperature if the
Edge is placed in direct
sunlight or held in your
hand. Also, the Edge will
take some time to adjust
to significant changes in
temperature.
Time of Day
Current time of day
based on your time
settings (format, time
zone, and daylight
saving time).
Time to Dest.
The estimated time
needed to reach your
final destination.
Data Field
The remaining time
Total Ascent *
Total elevation gain for
the current ride.
Time to Go
Stopwatch time.
Time – Avg.
Lap
Average time to
complete the laps so far.
Time
- Elapsed
Total time recorded
from pressing START to
RESET.
Time – Lap
Time
Amount of time in the
current lap.
Total Descent
Total elevation lost for
the current ride.
Vertical
Speed *
Rate of ascent or
descent in feet/meters
per hour.
VS – 30s
Avg. *
The 30-second moving
average of vertical
speed.
Waypoint at
Dest.
The last point on a route
to your destination.
Waypoint at
Next
The next point on your
route.
Edge 800 Owner’s Manual	43
Settings
Training Settings
You can customize three bike profiles.
The Edge uses the bike weight, the
odometer value, and the wheel size to
calculate accurate ride data.
1. Select MENU > > Bike
Settings > Bike Profiles.
2. Select a bike.
3. Select Bike Details.
4. Enter a name for the bike profile,
the bike weight, and the odometer
value.
5. If you are using a speed and
cadence sensor, select Wheel Size.
• Select Automatic to calculate
your wheel size using GPS
distance.
• Select Custom to enter your
wheel size. For a table of wheel
sizes and circumferences, see
page 56.
Marking Laps by Position
You can use Auto Lap® to
automatically mark the lap at a specific
position. This feature is helpful for
comparing your performance over
different parts of a ride (for example, a
long climb or training sprints). During
courses, use the By Position option to
trigger laps at all of the lap positions
saved in the course.
Updating Your Bike
Profile
1. Select MENU > > Bike
Settings > Auto Lap > Auto Lap
Trigger.
2. Select By Position.
3. Select Lap At.
4. Select an option:
• Select Lap Press Only to
trigger the lap counter each time
you press LAP and each time
you pass any of those locations
again.
44
Edge 800 Owner’s Manual
Settings
2.
3.
4.
5.
Select By Distance.
Select Lap At.
Enter a value.
If necessary, customize the lap data
fields (page 39).
Using Auto Pause
You can use Auto Pause® to pause the
timer automatically when you stop
moving or when your speed drops
below a specified value. This feature is
helpful if your ride includes stop lights
or other places where you need to slow
down or stop.
• Select Start And Lap to
trigger the lap counter at the
GPS location where you press
START and at any location
during the ride where you press
LAP.
• Select Mark And Lap to trigger
the lap counter at a specific GPS
location marked before the ride
and at any location during the
ride where you press LAP.
5. If necessary, customize the lap data
fields (page 39).
Marking Laps by Distance
You can use Auto Lap to automatically
mark the lap at a specific distance. This
feature is helpful for comparing your
performance over different parts of a
ride (for example, every 10 miles or 40
kilometers).
1. Select MENU > > Bike
Settings > Auto Lap > Auto Lap
Trigger.
Note: The paused time is not saved
with your history data.
1. Select MENU > > Bike
Settings > Auto Pause > Auto
Pause Mode.
2. Select an option:
Edge 800 Owner’s Manual	45
Settings
Changing the Start Notice
This feature automatically detects
when your Edge has acquired satellites
and is moving. It is a reminder to start
the timer so you can record your ride
data.
1. Select MENU > > Bike
Settings > Start Notice > Start
Notice Mode.
2. Select an option:
• Select Once.
• Select Repeat to change the
amount of time to delay the
reminder.
• Select When Stopped to pause
the timer automatically when
you stop moving.
• Select Custom Speed to pause
the timer automatically when
your speed drops below a
specified value.
3. If necessary, customize optional
time data fields (see page 39).
To view the entire time (from
pressing START to RESET), select
the Time - Elapsed data field.
Using Auto Scroll
You can use the auto scroll feature to
automatically cycle through all of the
training data pages while the timer is
running.
1. Select MENU > > Bike
Settings > Auto Scroll > Auto
Scroll Speed.
2. Select a display speed: Slow,
Medium, or Fast.
46
System Settings
• GPS Settings (page 47)
• Display Settings (page 48)
• Map Settings (see Navigation, page
xx)
• Route Settings (see Navigation,
page xx)
Edge 800 Owner’s Manual
Settings
• Data Recording Settings (see
History, page xx)
• Unit Settings (page 48)
• System Setup (page 48)
• Configuration Settings (page 49)
• Weight Scale Settings (page 49)
manually calibrate the altimeter on
your device.
1. Select MENU > > System >
GPS > Set Elevation.
2. Enter the elevation.
Satellite Page
The satellite page shows your current
GPS satellite information. Select
MENU > > System > GPS > View
Satellites.
GPS Settings
Training Indoors
1. Select MENU > > System >
GPS > GPS Mode.
2. Select Off.
When GPS is off, speed and distance
data are not available unless you have
an optional sensor that sends speed and
distance data to the Edge (such as the
GSC 10. The next time you turn on the
Edge, it will search for satellite signals
again.
On the satellite page, GPS accuracy
appears at the bottom of the page.
The green bars represent the strength
of each satellite signal received (the
number of the satellite appears below
each bar).
For more information about GPS, go to
www.garmin.com/aboutGPS.
Setting Your Current Elevation
If you have accurate elevation data
for your current location, you can
Edge 800 Owner’s Manual	47
Settings
Display Settings
Select MENU > > System >
Display.
System Setup
Select MENU >
System Setup.
• Backlight Timeout—see page 54.
• Background—sets the background
image (wallpaper).
• Screen Capture—allows you to
take screen captures on the device.
• Screen Calibration—see page xx.
• Language—sets the device
language.
• Tones—sets the audible tones.
• Time Format—sets the time
format to 12 hour or 24 hour.
• Auto Power Down—see page xx.
Customizing the Unit Settings
You can customize units of measure
for distance and speed, elevation,
temperature, weight, and position
format.
Time Zones
> System >
Each time you turn on the Edge
and acquire satellites, the Edge
automatically detects your time zone
and the current time of day.
1. Select MENU > > System >
Units.
2. Select a setting.
3. Select a unit for the setting.
48
Edge 800 Owner’s Manual
Settings
You can update your gender,
age, weight, height, and activity
class settings. The Edge uses this
information to calculate accurate ride
data.
Select MENU >
> User Profile.
About Calories
Calorie expenditure and heart rate
analysis technology is provided and
supported by Firstbeat Technologies
Ltd. For more information, go to
www.firstbeattechnologies.com.
1. Select MENU > > System >
Initial Setup > Yes.
2. Turn off the device.
3. Turn on the device.
4. Follow the on-screen instructions.
User Profile Settings
Changing the Configuration
Settings
You can modify all of the settings you
configured in the initial setup.
Weight
Why is this section in the System
settings? This is for a wireless (ANT)
weight scale. This feature is not
complete at this time.
Edge 800 Owner’s Manual	49
D
Settings
50
Edge 800 Owner’s Manual
Appendix
Appendix
Updating the Software
Help us better support you by
completing our online registration
today:
Contacting Garmin
Product Support
About the Edge
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a
photocopy, in a safe place.
1. Select an option:
• Use WebUpdater. Go to
www.garmin.com/products
/webupdater.
• Use Garmin Connect. Go to
www.garminconnect.com.
2. Follow the on-screen instructions.
Registering Your Device
To display important software
information and your unit ID, select
MENU > > About Edge.
Contact Garmin Product Support if you
have any questions about this product:
• In the USA, go to www.garmin
.com/support, or contact Garmin
USA by phone at (913) 397.8200 or
(800) 800.1020.
• In the UK, contact Garmin (Europe)
Ltd. by phone at 0808 2380000.
• In Europe, go to www.garmin.com
/support and click Contact
Support for in-country support
Edge 800 Owner’s Manual	51
Appendix
Caring for Your Device
information, or contact Garmin
(Europe) Ltd. by phone at +44 (0)
870.8501241.
notice
Do not store the device where
prolonged exposure to extreme
temperatures can occur, because it can
cause permanent damage.
Never use a hard or sharp object to
operate the touchscreen, or damage
may result.
Avoid chemical cleaners and solvents
that can damage plastic components.
• Press LIGHT to turn on the
backlight.
• Press any button to extend the
backlight another 15 seconds.
NOTE: Alerts and messages also
activate the backlight.
• Change the backlight settings
(page 49).
Using the Backlight
Buying Optional
Accessories
Go to http://buy.garmin.com,
or contact your Garmin dealer
for information about optional
accessories and replacement parts.
52
Cleaning the Device
1. Use a cloth dampened with a mild
detergent solution.
2. Wipe it dry.
Cleaning the Screen
1. Use a soft, clean, lint-free cloth.
2. If necessary, use water, isopropyl
alcohol, or eyeglass lens cleaner.
Edge 800 Owner’s Manual
Appendix
3. Apply the liquid to the cloth, and
gently wipe the screen with the
cloth.
Edge Specifications
Charging
temperature
range
From 32°F to 113°F
(from 0°C to 45°C)
Bands
(O-rings) for
the Edge
Mount
Two sizes:
• 1.3 × 1.5 × 0.9 in.
AS568-125
• 1.7 × 1.9 × 0.9 in.
AS568-131
Note: Use EPDM
(Ethylene Propylene
Diene Monomer)
replacement bands
only.
Go to http://buy
.garmin.com, or contact
your Garmin dealer.
notice
The Edge is waterproof to IEC
Standard 60529 IPX7. It can withstand
immersion in 1 meter of water for 30
minutes. Prolonged submersion can
cause damage to the device. After
submersion, be certain to wipe dry
and air dry the device before using or
charging.
From -4°F to 140°F
(from -20°C to 60°C)
Specifications
Operating
temperature
range
Edge Specifications
1000 mAh
rechargeable, built-in,
lithium-ion battery
Battery life
15 hours, typical usage
Optional
external battery
(accessory)
20 hours
Battery type
Edge 800 Owner’s Manual	53
Appendix
GSC 10 Specifications
Water
resistance
32.9 ft. (10 m)
Water
resistance
IPX7
Battery
User-replaceable
CR2032 (3 volts)
Perchlorate Material
– special handling may
apply.
See www.dtsc.ca.gov
/hazardouswaste
/perchlorate.
Battery
User-replaceable
CR2032 (3 volts)
Perchlorate Material
– special handling may
apply.
See www.dtsc.ca.gov
/hazardouswaste
/perchlorate.
Battery life
Approximately 3 years
(1 hour per day)
Operating
temperature
From 14°F to 122°F
(from -10°C to 50°C)
Note: In cold
conditions, wear
appropriate clothing
to keep the heart rate
monitor near your body
temperature.
Heart Rate Monitor Specifications
Radio
frequency/
protocol
54
Battery life
2.4 GHz wireless
communications
protocol
Approximately 1.4
years (1 hour per day)
Operating
temperature
From 5°F to 158°F
(from -15°C to 70°C)
Radio
frequency/
protocol
2.4 GHz wireless
communications
protocol
Edge Battery Information
Maximizing Battery Life
Decreasing the Backlight
Extensive use of screen backlighting
can significantly reduce battery life.
Edge 800 Owner’s Manual
Appendix
1. Press Power to open the status
page.
2. Adjust the brightness.
Adjusting the Backlight Timeout
notice
To prevent corrosion, thoroughly
dry the mini-USB port, the weather
cap, and the surrounding area before
charging or connecting to a computer.
1. Plug the AC charger into a standard
wall outlet.
2. Pull up the weather cap ➊ from the
mini-USB port ➋.
From the main menu, select Setup >
Display > Backlight Timeout.
Charging the Edge
You can adjust the backlight brightness
and decrease the backlight timeout to
maximize battery power.
Turning On the Auto Power Down
Feature
This feature automatically turns the
Edge off after 15 minutes of inactivity.
1. Select MENU > > System
> System Setup > Auto Power
Down.
2. Select On.
External Battery Accessory?
➊
➋
Edge 800 Owner’s Manual	55
Appendix
The wheel size is marked on both sides
of the tire. To modify your bike profile,
see page 44.
L (mm)
12 × 1.75
935
14 × 1.5
1020
14 × 1.75
1055
16 × 1.5
1185
56
1195
18 × 1.5
1340
18 × 1.75
1350
20 × 1.75
1515
20 × 1-3/8
1615
22 × 1-3/8
1770
22 × 1-1/2
1785
24 × 1
1753
24 × 3/4 Tubular
1785
24 × 1-1/8
1795
24 × 1-1/4
1905
24 × 1.75
1890
24 × 2.00
1925
24 × 2.125
1965
26 × 7/8
1920
26 × 1(59)
1913
26 × 1(65)
1952
26 × 1.25
1953
L (mm)
16 × 1.75
Wheel Size and
Circumference
Wheel Size
Wheel Size
3. Plug the small end of the AC
charger into the mini-USB port.
To connect the device to your
computer using the USB cable, see
page 31.
4. Charge the device for at least three
hours before you begin using it.
A fully charged battery can run for up
to 15 hours before it must be recharged.
Edge 800 Owner’s Manual
Wheel Size
L (mm)
Wheel Size
L (mm)
26 × 1-1/8
1970
650 × 38B
2105
26 × 1-3/8
2068
700 × 18C
2070
26 × 1-1/2
2100
700 × 19C
2080
26 × 1.40
2005
700 × 20C
2086
26 × 1.50
2010
700 × 23C
2096
26 × 1.75
2023
700 × 25C
2105
26 × 1.95
2050
700 × 28C
2136
26 × 2.00
2055
700 × 30C
2170
26 × 2.10
2068
700 × 32C
2155
26 × 2.125
2070
700C Tubular
2130
26 × 2.35
2083
700 × 35C
2168
26 × 3.00
2170
700 × 38C
2180
27 × 1
2145
700 × 40C
2200
27 × 1-1/8
2155
27 × 1-1/4
2161
27 × 1-3/8
2169
650 × 35A
2090
650 × 38A
2125
Appendix
Troubleshooting
Reduce the backlight time (page 49).
The battery gauge
does not seem
accurate.
The battery does not
last long.
How do I know my
Edge is in USB mass
storage mode?
My Edge does not
acquire satellite
signals.
I want to clear all the
user data from my
Edge.
Solution
Press and hold POWER, MENU, and RESET simultaneously
to reset the Edge.
Note: This does not erase any of your data or settings.
1. Turn off the Edge.
2. Press and hold POWER and RESET until the message
appears.
3. Select Yes to clear all user data.
Note: This deletes all user‑entered information, but it does not
delete your history.
1. Take your Edge out of parking garages and away from tall
buildings and trees.
2. Turn on the Edge.
3. Remain stationary for several minutes.
Allow the Edge battery to fully discharge, and then fully charge
the battery (without interrupting the charge cycle).
Problem
The buttons do not
respond. How do I
reset the Edge?
58
You should see a new removable disk drive in My Computer
on Windows computers and a mounted volume on Mac
computers.
Edge 800 Owner’s Manual
Appendix
Go to http://buy.garmin.com, or contact your Garmin dealer.
Purchase bands made of EPDM only.
Some of my data is
missing from my
Edge history.
I need to replace the
bands for the mount.
My course file was
renamed.
I cannot see any new
removable drives in
my list of drives.
Solution
You may have loaded a corrupted file.
1. Disconnect the Edge from your computer.
2. Turn off the Edge.
3. Press and hold MENU while you connect the Edge to your
computer.
Continue pressing MENU for 10 seconds or until the Edge
goes into mass storage mode.
If you have several network drives mapped on your computer,
Windows may have trouble assigning drive letters to your
Garmin drives. See the Help file for your operating system to
learn how to assign drive letters.
You can load .tcx and .crs files to the Edge. When you select
the course for any reason, the file is converted to a .fit course
file.
When the Edge memory is full, it will no longer record data.
Transfer data to your computer regularly to avoid losing data.
Problem
My Edge is connected
to the computer, but it
will not go into mass
storage mode.
Edge 800 Owner’s Manual	59
Appendix
Switch to
another bike
1. Select MENU >
Bike Settings > Bike
Profiles.
2. Select the bike you
want to use.
Or
On an active data page,
touch and hold the data
field until it turns blue.
When you lift up your
finger, you are prompted
to select a new data field.
Quickly
change a
data field
Tips and Shortcuts
Calibrate the
touchscreen
60
Do it from the status
page. Kenney said
they are trying to
have automatic bike
detection?
Select MENU >
System > Display >
Screen Calibration.
Edge 800 Owner’s Manual
Index
downloading software 7
elevation
data fields 38, 41
points 46
files
deleting 36
loading 35
data fields 38–41
data recording 34
data uploading 35
deleting
files 36
history 34
distance
data fields 38
distance alerts 9
backlight 41, 48
bands 3, 49, 55
battery 54
charging 1
conserving 41
bike mount 2, 49
bike profiles 43, 44
buttons 5
accessories 48
acquiring satellite signals 6,
54
activity classes 43, 53
alerts 9
ANT+ sensors 6, 20–32
troubleshooting 31
Auto Lap 10, 11
Auto Pause 12
Auto Scroll 12
Index
cadence
alerts 10
data fields 38
training 28
calibrating your power
meter 30
calorie alerts 9
calories 38
charging the Edge 1, 2
clearing user data 54
courses 13–19
loading 35
custom data fields 37–40
Garmin Connect 7, 8, 13,
16, 17, 19, 33
Garmin Product Support 47
Garmin Training Center 7,
8, 13, 16, 17, 19, 33
GPS
accuracy 38
satellite page 45
settings 45
grade 38
GSC 10 28, 50
battery 29
installing 25
Edge 800 Owner’s Manual	61
Index
O-rings (bands) 49
lithium-ion battery 1, 48
loading files 35
62
safety information 1
satellite signals 45
acquiring 6
saving your data 7, 19
sensors, pairing 6
settings 37
smart recording 34
software
downloads 7
updates 47
version 47
specifications 48
speed
data fields 40
zones 44
speed and cadence
sensor 50
spoke magnet 26
start notice message 42, 44
switching bikes 44
pairing ANT+ sensors 6, 20
paused time 12
pedal magnet 26
power
alerts 10
data fields 39
data recording 34
meter 30
zones 30
product registration 47
product support 47
profile
bike 43
user 43
icons 4
initial setup 4, 42
installing the Edge 2
resetting Edge 54
mount 2, 49
heart rate
alerts 9
data fields 38
settings 22
zones 22–24
heart rate monitor
battery 24
putting on 21
specifications 50
using 22
history 33, 55
deleting 34
transferring 8
viewing 33
recording history 7
registration 47
replacement parts 48
technical specifications 48
Edge 800 Owner’s Manual
Index
zones
heart rate 22–24
power 30
unit ID 47
updating software 47
USB 2, 8, 35, 54
user profile 43
workouts 16–19
loading 35
time
alerts 9
data fields 40
zones and formats 42
timer 7, 33
tire size 43
tones 41
training
indoors 45
training with your Edge 9
transferring data 8, 35
troubleshooting 31, 54
vertical speed 41
Virtual Partner 13, 15
weather cap 2, 8, 35
wheel sizes 43, 51
Edge 800 Owner’s Manual	63
For the latest free software updates (excluding map data) throughout the life of
your Garmin products, visit the Garmin Web site at www.garmin.com.
© 2010 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151st Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Jangshu 2nd Road, Sijhih, Taipei County, Taiwan
July 2010
Part Number 190-011267-00 Rev. A
Printed in Taiwan

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1.1-111
About                           : b0c1d130-172e-11db-afab-c0cb05117709
Create Date                     : 2010:07:02 08:23:16-05:00
Metadata Date                   : 2010:07:02 08:23:26-05:00
Modify Date                     : 2010:07:02 08:23:26-05:00
Creator Tool                    : Adobe InDesign CS2 (4.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10631 bytes, use -b option to extract)
Instance ID                     : uuid:ec6d9841-6350-4222-8352-24906b31aff7
Document ID                     : adobe:docid:indd:9b785cdf-6823-11df-855f-91b2e623defc
Rendition Class                 : proof:pdf
Derived From Instance ID        : 9b785cde-6823-11df-855f-91b2e623defc
Derived From Document ID        : adobe:docid:indd:09f2dc58-32b6-11df-9de2-a37ef2a1b924
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 141.00, 376.75, 300.00, 300.00, 300.00, 186.11, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 141.00, 376.75, 300.00, 300.00, 300.00, 186.11, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:01B83C4F1C89DE11B58AC7AAF866AF5D, uuid:7EC6B2727055DD11B22F90F22C99F3D5, uuid:E25910F3C7B1DD11BD7BD090702CAF6B, uuid:EDC47448D8B4DD118C6FB7646B111202, uuid:7CC6B2727055DD11B22F90F22C99F3D5, uuid:b4949040-e16e-44d7-a91c-71a092aecf59
Manifest Reference Document ID  : uuid:00B83C4F1C89DE11B58AC7AAF866AF5D, uuid:7DC6B2727055DD11B22F90F22C99F3D5, uuid:E15910F3C7B1DD11BD7BD090702CAF6B, uuid:EBC47448D8B4DD118C6FB7646B111202, adobe:docid:photoshop:4de436ca-5b7f-11da-836f-d93d58e91597, adobe:docid:photoshop:abad96c4-5ad9-11da-a8b6-fd302714b689, adobe:docid:photoshop:b1154702-5b72-11da-836f-d93d58e91597, adobe:docid:photoshop:92580a32-e9b5-11da-addf-b51745bc5286, adobe:docid:photoshop:731c65b1-e12f-11da-bd5a-97f96e696f98, adobe:docid:photoshop:509926f4-1d7c-11db-9eae-8afb4438b7d1, uuid:7BC6B2727055DD11B22F90F22C99F3D5, uuid:8132B5A5DEE9DB1183D5E0461A6F0AC7
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 68
Creator                         : Adobe InDesign CS2 (4.0.5)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IPH-01738

Navigation menu