Garmin 02324 Head Unit User Manual

Garmin International Inc Head Unit Users Manual

Contents

Users Manual

®FUSION® A-Class Infotainment System Installation InstructionsImportant Safety Information WARNINGSee the Important Safety and Product Information guide in the product box for product warnings and other important information.NOTICEFailure to follow these cautions could result in damage to the vehicle or poor product performance.This device must be installed according to these instructions.Disconnect the vehicle's power supply before beginning to install this product.Before applying power to this product, make sure it has been correctly grounded according to the installation instructions.You must read all installation instructions before beginning the installation. If you experience difficulty during the installation, contact FUSION Product Support.Installing the Infotainment System1If necessary, remove the dashboard bezel around the stereo or stereo installation location.2If necessary, remove the existing stereo or infotainment system.3Insert the included bracket À into the dashboard Á.4Secure the bracket to the dashboard using screws (not included) through the inner holes Â.5Connect the included wiring harnesses to the vehicle wiring harness and other A/V connectors as needed.You can consult the wiring diagrams to identify specific connectors and wires (Wiring Harnesses, page 1).6Route all harnesses and other wiring through the opening in the bracket, and make all necessary wiring connections to the back of the infotainment system (Connector Identification, page 1).7Insert the infotainment system à into the bracket.8Secure the infotainment system to the bracket and dashboard using screws (not included) through the outer holes Ä.9Install the included dashboard bezel around the infotainment system.Connector IdentificationItem Connector NotesÀUSB This connector is compatible with the two included USB cables.ÁGPS This port is for the included active GPS antenna.ÂAM/FM antenna You may need the included antenna connector adapter to connect the vehicle antenna to the system.ÃPrimary wiring harnessThis harness contains power and speaker wiring.ÄSecondary wiring harnessThis harness contains additional audio/video connectors.Wiring HarnessesPrimary Wiring HarnessThe primary wiring harness contains the main power and speaker connections for the system. The harness connects directly to the stereo and to the vehicle wiring harness without modification. You can use this diagram to troubleshoot or to address non-default installation requirements.NOTE: The power and rear speaker wires in the wiring harness have inline connectors. These connectors can be used when you need an alternative power source to power the infotainment system, or when the vehicle ISO 10487 connector does not connect to the rear speakers.March 2016 Printed in Taiwan 190-02062-02_0A

Navigation menu