Garmin 08900 Low Power FM Transmitter User Manual 7200 OM indd

Garmin International Inc Low Power FM Transmitter 7200 OM indd

users manual 4

StreetPilot 7200 Owner’s Manual 11VIEWING THE MAP AND OTHER PAGESGPS InfoThe GPS Info page displays the GPS receiver status, including current satellite coverage, receiver status, and position accuracy. To access this page, open the Menu page and touch Tools > GPS Info. From the map, you can touch the signal strength bars while the receiver is establishing a fix to view the GPS Info page. Sky viewSatellite signal strength barsThe sky view provides an overhead view of each satellite position relative to your unit’s last known location. The outer circle represents the horizon. The inner circle represents an elevation of 45° above the horizon. Any satellite depicted near the center is directly overhead. A signal strength bar appears for each satellite in view. A hollow bar indicates the GPS receiver has found the satellite and is collecting data. A solid bar indicates the GPS receiver has collected the necessary data, and the satellite is ready for use. GPS SettingsFrom the Menu page, touch Tools > GPS Info > GPS Settings. You can also access the GPS Settings by touching the GPS Settings button on the GPS Info page. Use Indoors—touch Yes to turn the GPS receiver off and use the unit indoors. Set Position—if the GPS receiver has not established a fix on your location, you can enter your current location. From the GPS Settings page, touch Set Position. Select your location using the map and touch OK. WAAS—7200_OM.indd 11 8/24/2005 8:33:50 AM
12 StreetPilot 7200 Owner’s ManualCREATING AND EDITING ROUTESCREATING AND EDITING ROUTESCreating a New RouteFrom the Menu page, touch Tools > My Data > Routes. ➊ Touch Create New Saved Route. ➋ Select a starting point and touch Next.➌ Select an ending point and touch Next. ➍ To add a point, select Yes and touch Next.➎ Select a midpoint and touch Next. ➏ Select an option and touch Next.➐ Select your preference and touch Next.➑ Touch Finish.Editing a Saved RouteFrom the Menu page, touch Tools > My Data > Routes, ➋ Touch the route you want to edit.➊ Touch Edit/Review Routes. Saving the Active RouteFrom the Menu page, touch Tools > My Data > Routes > Save Active Route.Navigating a Saved RouteFrom the Menu page, touch Tools > My Data > Routes > Navigate Saved Route. Touch the route you want to navigate. Recalculating the RouteFrom the Menu page, touch Tools > My Data > Routes > Recalculate Route.Adding a Detour to a RouteIf you need to take a detour from your current route, open the Menu page and touch Detour. Select a detour distance or a road to detour around. The unit calculates a new route.Stopping Your RouteFrom the Menu page, touch Stop. 7200_OM.indd 12 8/24/2005 8:33:52 AM
StreetPilot 7200 Owner’s Manual 13CREATING AND EDITING ROUTESCreating a New RouteFrom the Menu page, touch Tools > My Data > Routes. ➊ Touch Create New Saved Route. ➋ Select a starting point and touch Next.➌ Select an ending point and touch Next. ➍ To add a point, select Yes and touch Next.➎ Select a midpoint and touch Next. ➏ Select an option and touch Next.➐ Select your preference and touch Next.➑ Touch Finish.Editing a Saved RouteFrom the Menu page, touch Tools > My Data > Routes, ➋ Touch the route you want to edit.➊ Touch Edit/Review Routes. Saving the Active RouteFrom the Menu page, touch Tools > My Data > Routes > Save Active Route.Navigating a Saved RouteFrom the Menu page, touch Tools > My Data > Routes > Navigate Saved Route. Touch the route you want to navigate. Recalculating the RouteFrom the Menu page, touch Tools > My Data > Routes > Recalculate Route.Adding a Detour to a RouteIf you need to take a detour from your current route, open the Menu page and touch Detour. Select a detour distance or a road to detour around. The unit calculates a new route.Stopping Your RouteFrom the Menu page, touch Stop. 7200_OM.indd 13 8/24/2005 8:33:53 AM
14 StreetPilot 7200 Owner’s ManualCREATING AND EDITING ROUTESAdding Avoidances➌ Touch the down ➋ Touch Navigation.➊ From the Menu ➍ Select the road types arrow and touch Avoidance Setup.you want to avoid. page, touch Settings.Creating Custom AvoidsYou can enter specific areas and roads to avoid in your routes. From the Avoidance Setup menu, touch Custom Avoids. ➊ Touch Add New Avoid Area.➍ Touch Finish.➌ Touch the second corner and touch Next.➋ Touch the first corner and touch Next.7200_OM.indd 14 8/24/2005 8:33:55 AM
StreetPilot 7200 Owner’s Manual 15USING THE LOGSAdding Avoidances➌ Touch the down ➋ Touch Navigation.➊ From the Menu ➍ Select the road types arrow and touch Avoidance Setup.you want to avoid. page, touch Settings.Creating Custom AvoidsYou can enter specific areas and roads to avoid in your routes. From the Avoidance Setup menu, touch Custom Avoids. ➊ Touch Add New Avoid Area.➍ Touch Finish.➌ Touch the second corner and touch Next.➋ Touch the first corner and touch Next.Adjusting the Track LogAs you travel, the StreetPilot creates a bread crumb trail (track log) of your movement. From the Menu page, touch Tools > My Data > Track Log. Recording—turn off or on the track log recorder. Percentage Full—displays the current percentage capacity of the track log. To clear the track log, touch Percentage Full > Yes > OK. Using the Mileage LogsUSING THE LOGS7200_OM.indd 15 8/24/2005 8:33:57 AM
16 StreetPilot 7200 Owner’s ManualLISTENING TO MUSICLISTENING TO MUSICWith your 7200, you can listen to XM Radio, MP3 files, and music played over an external device, such as a CD player or MP3 player. You can then broadcast music (and all of the 7200’s audio output) over your vehicle’s speakers.XM RadioThe GXM™ 30 Smart Antenna enables the 7200 to receive XM signals. You must have a GXM 30 connected to your 7200 and have activated the service to listen to XM Radio. See page XX for information about connecting your GXM 30 and activating service. Opening XM RadioAfter you have connected the GXM 30 and activated your XM Radio service, you can listen to XM Radio. ➋ Touch Music. ➊ From the Menu page, touch Tools. 7200_OM.indd 16 8/24/2005 8:33:57 AM
StreetPilot 7200 Owner’s Manual 17LISTENING TO MUSICWith your 7200, you can listen to XM Radio, MP3 files, and music played over an external device, such as a CD player or MP3 player. You can then broadcast music (and all of the 7200’s audio output) over your vehicle’s speakers.XM RadioThe GXM™ 30 Smart Antenna enables the 7200 to receive XM signals. You must have a GXM 30 connected to your 7200 and have activated the service to listen to XM Radio. See page XX for information about connecting your GXM 30 and activating service. Opening XM RadioAfter you have connected the GXM 30 and activated your XM Radio service, you can listen to XM Radio. ➋ Touch Music. ➊ From the Menu page, touch Tools. Listening to XM RadioXM Radio pageIf necessary, touch Input to put the unit in XM mode.Touch to adjust the volume. Touch and to change Categories. The Category name is listed above the buttons. Touch and to change the Channel within the Category. Touch Browse to select a Category and then a Channel. Saving and Using PresetsSave your favorite channels as presets. From the XM Radio page, touch My XM.Touch Add Preset. Touch the Current Channel to add the channel you are listening to your presets. You can also touch Browse by Category to select a different channel. Touch the preset you want to assign to this channel. To play a preset channel, touch a preset button along the bottom of the XM Radio page. Also, you can touch Browse > Presets. ➊➋➌➍➎7200_OM.indd 17 8/24/2005 8:33:58 AM
18 StreetPilot 7200 Owner’s ManualLISTENING TO MUSICSaving Your Favorite ArtistsFrom the XM Radio page, touch My XM.Touch Add Artist. Touch the Current Artist to save the artist you are listening to. You can also touch Browse by Category to select a different artist. After you have saved several artists, you can touch the Scan button to scan the XM Radio for those artists. Your 7200 will automatically play a song by an artist in your list. When that song is over, it searches for another artist in your list. ScanningFrom the XM Radio page, touch Scan.Touch Artists to scan your saved artists. You can also select a category to scan. Your 7200 plays a few seconds of each channel in the selected category. To stop scanning, press Scanning. XM1, 2, and 3Three sets of presets and artists are provided for you. XM1 can contain a completely different set of presets and artists. For example, XM1 contains Mom’s favorites while XM2 contains Dad’s favorites. From the XM Radio page, touch My XM. Touch Change XM1, XM2, XM3. Touch the desired XM. Subscriptions7200_OM.indd 18 8/24/2005 8:33:58 AM
StreetPilot 7200 Owner’s Manual 19LISTENING TO MUSICListening to Music over the Vehicle’s SpeakersYou can listen to the music played by the 7200, such as XM Radio, over your vehicle’s speakers! Plug in the 12-Volt adapter to an available outlet in your vehicle. 7200_OM.indd 19 8/24/2005 8:33:58 AM
20 StreetPilot 7200 Owner’s ManualLISTENING TO MUSIC➏ Turn on your vehicle’s radio and tune it to the frequency you selected in the previous step. The 7200’s audio output is broadcast over your vehicle’s speakers. ➍ Touch FM Transmitter and then Next. ➊ From the Music page, touch the volume button.➋ Touch Advanced.➌ Touch Audio Output. ➎ Use the + and - to select a frequency and touch Done. 7200_OM.indd 20 8/24/2005 8:33:59 AM

Navigation menu