Garmin 08900 Low Power FM Transmitter User Manual 7200 OM indd
Garmin International Inc Low Power FM Transmitter 7200 OM indd
Garmin >
Contents
users manual 4
VIEWING THE MAP AND OTHER PAGES GPS Info The GPS Info page displays the GPS receiver status, including current satellite coverage, receiver status, and position accuracy. To access this page, open the Menu page and touch Tools > GPS Info. From the map, you can touch the signal strength bars while the receiver is establishing a fix to view the GPS Info page. Sky view Satellite signal strength bars The sky view provides an overhead view of each satellite position relative to your unit’s last known location. The outer circle represents the horizon. The inner circle represents an elevation of 45° above the horizon. Any satellite depicted near the center is directly overhead. StreetPilot 7200 Owner’s Manual 7200_OM.indd 11 A signal strength bar appears for each satellite in view. A hollow bar indicates the GPS receiver has found the satellite and is collecting data. A solid bar indicates the GPS receiver has collected the necessary data, and the satellite is ready for use. GPS Settings From the Menu page, touch Tools > GPS Info > GPS Settings. You can also access the GPS Settings by touching the GPS Settings button on the GPS Info page. Use Indoors—touch Yes to turn the GPS receiver off and use the unit indoors. Set Position—if the GPS receiver has not established a fix on your location, you can enter your current location. From the GPS Settings page, touch Set Position. Select your location using the map and touch OK. WAAS— 11 8/24/2005 8:33:50 AM CREATING AND EDITING ROUTES CREATING AND EDITING ROUTES Edi From Creating a New Route ➊T From the Menu page, touch Tools > My Data > Routes. ➊ Touch Create New ➋ Select a starting Saved Route. ➌ Select an ending ➍ To add a point, point and touch Next. point and touch Next. select Yes and touch Nex Sav ➎ Select a midpoint ➏ Select an option and touch Next. ➐ Select your and touch Next. preference and touch Next. ➑ Touch Finish. From > Sav Nav From > Na navig Rec 12 7200_OM.indd 12 StreetPilot 7200 Owner’s Manual 8/24/2005 8:33:52 AM CREATING AND EDITING ROUTES Editing a Saved Route From the Menu page, touch Tools > My Data > Routes, From the Menu page, touch Tools > My Data > Routes > Recalculate Route. ➊ Touch Edit/Review ➋ Touch the route you Adding a Detour to a Route Routes. select Yes and touch Next. If you want toneed edit.to take a detour from your current route, open the Menu page and touch Detour. Select a detour distance or a road to detour around. The unit calculates a new route. Saving the Active Route ➑ Touch Finish. From the Menu page, touch Tools > My Data > Routes > Save Active Route. Navigating a Saved Route From the Menu page, touch Tools > My Data > Routes > Navigate Saved Route. Touch the route you want to navigate. Stopping Your Route From the Menu page, touch Stop. Recalculating the Route StreetPilot 7200 Owner’s Manual 7200_OM.indd 13 13 8/24/2005 8:33:53 AM CREATING AND EDITING ROUTES Adding Avoidances ➊ From the Menu ➋ Touch Navigation. ➌ Touch the down page, touch Settings. ➍ Select the road types you want to avoid. arrow and touch Avoidance Setup. Creating Custom Avoids You can enter specific areas and roads to avoid in your routes. From the Avoidance Setup menu, touch Custom Avoids. ➊ Touch Add New ➋ Touch the first Avoid Area. 14 7200_OM.indd 14 ➌ Touch the second corner and touch Next. ➍ Touch Finish. corner and touch Next. StreetPilot 7200 Owner’s Manual 8/24/2005 8:33:55 AM s USING THE LOGS USING THE LOGS Adjusting the Track Log you want to avoid. As you travel, the StreetPilot creates a bread crumb trail Using the Mileage Logs (track log) of your movement. From the Menu page, touch Tools > My Data > Track Log. Recording—turn off or on the track log recorder. Percentage Full—displays the current percentage capacity of the track log. To clear the track log, touch Percentage Full > Yes > OK. StreetPilot 7200 Owner’s Manual 7200_OM.indd 15 15 8/24/2005 8:33:57 AM LISTENING TO MUSIC LISTENING TO MUSIC With your 7200, you can listen to XM Radio, MP3 files, and music played over an external device, such as a CD player or MP3 player. You can then broadcast music (and all of the 7200’s audio output) over your vehicle’s speakers. ➊ From the Menu page, touch Tools. XM Radio The GXM™ 30 Smart Antenna enables the 7200 to receive XM signals. You must have a GXM 30 connected to your 7200 and have activated the service to listen to XM Radio. See page XX for information about connecting your GXM 30 and activating service. ➋ Touch Music. Opening XM Radio After you have connected the GXM 30 and activated your XM Radio service, you can listen to XM Radio. 16 7200_OM.indd 16 StreetPilot 7200 Owner’s Manual 8/24/2005 8:33:57 AM LISTENING TO MUSIC Listening to XM Radio XM Radio page If necessary, touch Input to put the unit in XM mode. Touch to adjust the volume. Touch and to change Categories. The Category name is listed above the buttons. Touch and to change the Channel within the ➍Category. Touch Browse to select a Category and then a ➎ Channel. StreetPilot 7200 Owner’s Manual 7200_OM.indd 17 Saving and Using Presets Save your favorite channels as presets. From the XM Radio page, touch My XM. Touch Add Preset. Touch the Current Channel to add the channel you are listening to your presets. You can also touch Browse by Category to select a different channel. Touch the preset you want to assign to this channel. To play a preset channel, touch a preset button along the bottom of the XM Radio page. Also, you can touch Browse > Presets. ➊ ➋ ➌ 17 8/24/2005 8:33:58 AM LISTENING TO MUSIC Saving Your Favorite Artists From the XM Radio page, touch My XM. Touch Add Artist. Touch the Current Artist to save the artist you are listening to. You can also touch Browse by Category to select a different artist. After you have saved several artists, you can touch the Scan button to scan the XM Radio for those artists. Your 7200 will automatically play a song by an artist in your list. When that song is over, it searches for another artist in your list. XM1, 2, and 3 Three sets of presets and artists are provided for you. XM1 can contain a completely different set of presets and artists. For example, XM1 contains Mom’s favorites while XM2 contains Dad’s favorites. From the XM Radio page, touch My XM. Touch Change XM1, XM2, XM3. Touch the desired XM. Subscriptions Scanning From the XM Radio page, touch Scan. Touch Artists to scan your saved artists. You can also select a category to scan. Your 7200 plays a few seconds of each channel in the selected category. To stop scanning, press Scanning. 18 7200_OM.indd 18 StreetPilot 7200 Owner’s Manual 8/24/2005 8:33:58 AM LISTENING TO MUSIC Listening to Music over the Vehicle’s Speakers You can listen to the music played by the 7200, such as XM Radio, over your vehicle’s speakers! Plug in the 12Volt adapter to an available outlet in your vehicle. StreetPilot 7200 Owner’s Manual 7200_OM.indd 19 19 8/24/2005 8:33:58 AM LISTENING TO MUSIC ➊ From the Music page, touch ➋ Touch Advanced. ➌ Touch Audio Output. ➍ Touch FM Transmitter ➎ Use the + and - to select a ➏ Turn on your vehicle’s radio the volume button. and then Next. 20 7200_OM.indd 20 frequency and touch Done. and tune it to the frequency you selected in the previous step. The 7200’s audio output is broadcast over your vehicle’s speakers. StreetPilot 7200 Owner’s Manual 8/24/2005 8:33:59 AM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 10 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:828ae7e7-a3fc-4c73-b796-f293c56e4eca Modify Date : 2005:08:30 11:06:16-04:00 Create Date : 2005:08:30 11:06:01-04:00 Metadata Date : 2005:08:30 11:06:16-04:00 Document ID : uuid:1b0ea273-5893-4e66-af59-cabf4b0488ba Format : application/pdf Title : 7200_OM.indd Creator : Adobe InDesign CS (3.0.1) Producer : Adobe PDF Library 6.0EXIF Metadata provided by EXIF.tools