Garmin A1156 Bluetooth GPS Receiver User Manual

Garmin International Inc Bluetooth GPS Receiver GLO 2

a href="https://usermanual.wiki/Garmin" itemprop="url"> Garmin >

GLO 2 User Manual

2 GLO™ 2 GLONASS and GPS Sensor InstructionsInstalling the Battery WARNINGThis product contains a lithium-ion battery� See page 5 for important battery safety information�1 With your thumbnail, slide the battery cover release tab ➊� ➌➊➋2 Remove the battery cover ➋� 3 Locate the metal contacts on the end of the lithium-ion battery� 4 Insert the battery ➌ so the metal contacts on the battery align with the metal contacts inside the battery compartment� 5 Press the battery down into place�6 Insert the battery cover into the notches and press down� The release tab locks the cover in place�Replacement BatteryYou can purchase a replacement battery (010-11935-00) at http://buy�garmin�com�Charging the BatteryYou can use the sensor while you are charging it�1 Plug the small end of the power cable into the mini-USB connector on the end of the sensor�2 Plug the other end of the power cable into an appropriate source of power for the cable type�It takes about three hours to charge the battery� A fully charged battery lasts about 13 hours�NOTE: If the battery has not been charged for a long period of time, remove the battery, connect the cable to the device and a power source, and then replace the battery� The battery will charge as usual�Glo_2_Instructions_print.indd 2 8/1/2018 12:36:52 PM
Download:
Mirror Download [FCC.gov]
Document ID4021730
Application IDouDpB++efUqVXq9bjH+YpA==
Document DescriptionGLO 2 User Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize136.21kB (1702572 bits)
Date Submitted2018-09-27 00:00:00
Date Available2018-10-08 00:00:00
Creation Date0000-00-00 00:00:00
Document Lastmod0000-00-00 00:00:00
Document TitleGLO 2 User Manual
FCC ID Filing: IPH-A1156

Navigation menu