Garmin A2557 Low Power Transmitter 2402-2480 MHz User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2891936
Application ID	QDLRaZI/wBh/SiOqm3ui8w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	240.55kB (3006904 bits)
Date Submitted	2016-02-01 00:00:00
Date Available	2016-02-01 00:00:00
Creation Date	2016-01-25 13:01:23
Producing Software	Antenna House PDF Output Library 6.2.625 (Windows (x64))
Document Lastmod	2016-01-26 15:42:12
Document Title	Users Manual
Document Creator	AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)

fēnix 3/HR
®
AF
Owner’s Manual
January 2016
190-01840-00_0D
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin , the Garmin logo, ANT+ , Auto Lap , Auto Pause , Edge , fēnix , TracBack , VIRB , and Virtual Partner are trademarks of Garmin Ltd. or its
subsidiaries, registered in the USA and other countries. Connect IQ™, Garmin Connect™, Garmin Express™, HRM-Run™, tempe™, and Vector™ are trademarks
of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
®
®
®
®
®
®
®
®
®
American Heart Association is a registered trademark of American Heart Association, Inc. Android™ is a trademark of Google Inc. Apple and Mac are
trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by Garmin is under license. The Cooper Institute , as well as any related trademarks, are the property of The Cooper Institute. Advanced heartbeat
analytics by Firstbeat. Training Stress Score™ (TSS), Intensity Factor™ (IF), and Normalized Power™ (NP) are trademarks of Peaksware, LLC. Wi‑Fi is a
registered mark of Wi-Fi Alliance Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other
trademarks and trade names are those of their respective owners.
®
®
®
®
®
®
®
This product may contain a library (Kiss FFT) licensed by Mark Borgerding under the 3-Clause BSD License http://opensource.org/licenses/BSD-3-Clause.
This product is ANT+ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
AF
®
Table of Contents
Keys ............................................................................................ 1
Locking the Keys .................................................................... 1
Charging the Device ................................................................... 1
Pairing Your Smartphone with Your Device ............................... 1
Support and Updates .................................................................. 1
Setting Up Garmin Express ................................................... 1
Creating a Custom Activity ..................................................... 8
Golfing ........................................................................................ 8
Playing Golf ............................................................................ 8
Hole Information ..................................................................... 8
Viewing Layup and Dogleg Distances ................................... 9
Using the Golf Odometer ....................................................... 9
Keeping Score ....................................................................... 9
Reviewing Scores .................................................................. 9
Measuring a Shot ................................................................... 9
Heart Rate Features ....................................................... 1
Training........................................................................... 9
Introduction.....................................................................1
Setting Up Your User Profile ....................................................... 9
Fitness Goals ......................................................................... 9
About Heart Rate Zones ........................................................ 9
Setting Your Heart Rate Zones ......................................... 9
Letting the Device Set Your Heart Rate Zones ............... 10
Heart Rate Zone Calculations ......................................... 10
About Lifetime Athletes ........................................................ 10
Setting Your Power Zones ................................................... 10
Activity Tracking ........................................................................ 10
Turning On Activity Tracking ................................................ 10
Using the Move Alert ............................................................ 10
Auto Goal ............................................................................. 10
Sleep Tracking ..................................................................... 10
Using Automated Sleep Tracking .................................... 10
Using Do Not Disturb Mode ............................................ 10
Intensity Minutes .................................................................. 11
Workouts ................................................................................... 11
Following a Workout From the Web ..................................... 11
Starting a Workout ............................................................... 11
About the Training Calendar ................................................ 11
Using Garmin Connect Training Plans ............................ 11
Interval Workouts ...................................................................... 11
Creating an Interval Workout ............................................... 11
Starting an Interval Workout ................................................ 11
Stopping an Interval Workout ............................................... 11
Using Virtual Partner® .............................................................. 11
Setting a Training Target .......................................................... 12
Cancelling a Training Target ................................................ 12
Racing a Previous Activity ........................................................ 12
Personal Records ..................................................................... 12
Viewing Your Personal Records .......................................... 12
Restoring a Personal Record ............................................... 12
Clearing a Personal Record ................................................. 12
Clearing All Personal Records ............................................. 12
About Training Effect ................................................................ 12
AF
Wrist-based Heart Rate .............................................................. 2
Wearing the Device and Heart Rate ...................................... 2
Tips for Erratic Heart Rate Data ............................................. 2
Viewing the Heart Rate Widget .............................................. 2
Broadcasting Heart Rate Data to Garmin Devices ................ 2
Turning Off the Wrist Heart Rate Monitor .............................. 2
Putting On the Heart Rate Monitor ............................................. 2
Tips for Erratic Heart Rate Data ............................................. 2
Running Dynamics ...................................................................... 3
Training with Running Dynamics ........................................... 3
Color Gauges and Running Dynamics Data .......................... 3
Ground Contact Time Balance Data ................................. 3
Tips for Missing Running Dynamics Data .............................. 4
Physiological Measurements ...................................................... 4
About VO2 Max. Estimates .................................................... 4
Getting Your VO2 Max. Estimate for Running .................. 4
Getting Your VO2 Max. Estimate for Cycling .................... 4
Viewing Your Predicted Race Times ..................................... 4
Recovery Advisor ................................................................... 5
Turning On the Recovery Advisor ..................................... 5
Recovery Heart Rate ............................................................. 5
Lactate Threshold .................................................................. 5
Performing a Guided Test to Determine Your Lactate
Threshold .......................................................................... 5
Performance Condition .......................................................... 5
Viewing Your Performance Condition ............................... 5
Stress Score .......................................................................... 5
Viewing Your Stress Score ............................................... 5
Activities......................................................................... 5
Starting an Activity ...................................................................... 5
Stopping an Activity .................................................................... 6
Skiing .......................................................................................... 6
Going Cross-Country Skiing .................................................. 6
Going Downhill Skiing or Snowboarding ................................ 6
Viewing Your Ski Runs ...................................................... 6
Hiking .......................................................................................... 6
Going for a Hike ..................................................................... 6
Running ...................................................................................... 6
Going for a Run ...................................................................... 6
Using the Metronome ............................................................. 6
Biking .......................................................................................... 7
Going for a Ride ..................................................................... 7
Swimming ................................................................................... 7
Going for a Pool Swim ........................................................... 7
Swim Terminology ............................................................. 7
Stroke Types ..................................................................... 7
Resting During Pool Swimming ......................................... 7
Training with the Drill Log .................................................. 7
Going for an Open Water Swim ............................................. 7
Water Sports ............................................................................... 8
Starting a Stand Up Paddle Boarding Activity ....................... 8
Starting a Rowing Activity ...................................................... 8
Indoor Activities .......................................................................... 8
Multisport .................................................................................... 8
Starting a Triathlon or Multisport Activity ............................... 8
Table of Contents
Clock.............................................................................. 12
Setting an Alarm ....................................................................... 12
Starting the Countdown Timer .................................................. 13
Using the Stopwatch ................................................................. 13
Setting Sunrise and Sunset Alerts ............................................ 13
Navigation..................................................................... 13
Projecting a Waypoint ............................................................... 13
Saving Your Location ............................................................... 13
Editing Your Saved Locations .............................................. 13
Editing Your Saved Locations .................................................. 13
Deleting All Saved Locations .................................................... 13
Navigating to a Destination ....................................................... 13
Navigating with Sight 'N Go ...................................................... 13
Compass ................................................................................... 13
Map ........................................................................................... 13
Panning and Zooming the Map ............................................ 13
Navigating To Your Starting Point ............................................ 14
Altimeter and Barometer ........................................................... 14
History ........................................................................... 14
Using History ............................................................................ 14
Multisport History ................................................................. 14
Viewing Your Time in Each Heart Rate Zone ...................... 14
Viewing Step Totals .................................................................. 14
Viewing Data Totals .................................................................. 14
Deleting History ........................................................................ 14
Using the Odometer .................................................................. 14
Connected Features..................................................... 14
Enabling Bluetooth Notifications ............................................... 15
Viewing Notifications ............................................................ 15
Managing Notifications ......................................................... 15
Turning Off Bluetooth Technology ....................................... 15
Turning On and Off Bluetooth Connection Alerts ................ 15
Locating a Lost Mobile Device .................................................. 15
Garmin Connect ........................................................................ 15
Using Garmin Connect Mobile ............................................. 15
Manually Uploading Data to Garmin Connect Mobile ..... 16
Using Garmin Connect on Your Computer .......................... 16
Wi‑Fi® Connected Features ..................................................... 16
Setting Up Wi‑Fi Connectivity .............................................. 16
Connect IQ Features.................................................... 16
Device Information ....................................................... 21
Viewing Device Information ...................................................... 21
Specifications ............................................................................ 21
Battery Information ............................................................... 21
HRM-Run Specifications ........................................................... 21
Data Management .................................................................... 21
Disconnecting the USB Cable .............................................. 22
Deleting Files ....................................................................... 22
Troubleshooting ........................................................................ 22
My daily step count does not appear ................................... 22
The temperature reading is not accurate ............................. 22
Resetting Your Device ......................................................... 22
Restoring All Default Settings .............................................. 22
Maximizing the Battery Life .................................................. 22
Getting More Information ..................................................... 22
Device Maintenance ..................................................... 22
Device Care .............................................................................. 22
Cleaning the Device ............................................................. 22
Metal Watch Band Adjustment ................................................. 22
Heart Rate Monitor Care Instructions ....................................... 22
Caring for the Heart Rate Monitor ........................................ 22
User Replaceable Batteries ...................................................... 23
Replacing the Heart Rate Monitor Battery ........................... 23
AF
Downloading Connect IQ Features .......................................... 16
Downloading Connect IQ Features Using Your Computer ....... 16
Widgets ..................................................................................... 16
Viewing Widgets .................................................................. 16
Customizing the Widget Loop .............................................. 16
VIRB Remote ....................................................................... 17
Controlling a VIRB Action Camera .................................. 17
tempe ........................................................................................ 21
Customizing Your Device............................................ 17
Data Fields ................................................................................ 23
VO2 Max. Standard Ratings ..................................................... 26
Wheel Size and Circumference ................................................ 26
Software License Agreement ................................................... 26
BSD 3-Clause License .............................................................. 27
Symbol Definitions .................................................................... 27
Index.............................................................................. 28
Activity App Settings ................................................................. 17
Customizing the Data Screens ............................................ 17
Adding a Map to an Activity ................................................. 17
Alerts .................................................................................... 17
Setting an Alert ................................................................ 18
Auto Lap ...............................................................................18
Marking Laps by Distance ............................................... 18
Enabling Auto Pause® ......................................................... 18
Enabling Auto Climb ............................................................ 18
3D Speed and Distance ....................................................... 18
Using Auto Scroll ................................................................. 18
UltraTrac .............................................................................. 19
Power Save Timeout Settings .............................................. 19
Turning On and Off the Lap Key .......................................... 19
Watch Face Settings ................................................................. 19
Customizing the Watch Face ............................................... 19
Sensors Settings ....................................................................... 19
Compass Settings ................................................................ 19
Calibrating the Compass ................................................. 19
Setting the North Reference ............................................ 19
Altimeter Settings ................................................................. 19
Calibrating the Barometric Altimeter ............................... 19
Barometer Settings .............................................................. 20
Navigation Settings ................................................................... 20
Customizing Map Features .................................................. 20
Setting Up a Heading Bug ................................................... 20
System Settings ........................................................................ 20
Time Settings ....................................................................... 20
Backlight Settings ................................................................ 20
Changing the Units of Measure ........................................... 20
Appendix....................................................................... 23
ANT+ Sensors............................................................... 20
Pairing ANT+ Sensors .............................................................. 20
Using an Optional Bike Speed or Cadence Sensor .................. 21
Foot Pod ................................................................................... 21
Improving Foot Pod Calibration ........................................... 21
Calibrating Your Foot Pod Manually .................................... 21
Setting Foot Pod Speed and Distance ................................. 21
ii
Table of Contents
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
4 With the contacts aligned, place the device into the cradle Á
AF
and release the arms to hold the device in place.
When you connect the device to a power source, the device
turns on, and the battery charge level appears on the screen.
5 Charge the device completely.
Pairing Your Smartphone with Your Device
Select to turn the backlight on and off.
LIGHT Hold to view shortcut menu options, including turning the
device on and off.
À
Select to start or stop an activity.
START Select to choose an option in a menu.
STOP
Á
Â
BACK
LAP
Select to return to the previous page.
Select to record a lap or a rest during an activity.
Select to scroll through widgets, menus, and messages.
DOWN Hold to view the clock from any page.
Ã
Ä
UP
Select to scroll through widgets, menus, and messages.
Select to dismiss a short message or notification.
Hold to view the main menu.
Locking the Keys
You can lock the keys to prevent accidental key presses.
1 Hold LIGHT for two seconds, and select Lock Device to lock
the keys.
2 Hold LIGHT for two seconds, and select Unlock Device to
unlock the keys.
Charging the Device
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and
the surrounding area before charging or connecting to a
computer. Refer to the cleaning instructions in the appendix.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
1 Plug the USB end of the cable into the AC adapter or a
computer USB port.
2 Plug the AC adapter into a standard wall outlet.
3 Pinch the sides of the charging cradle À to open the arms on
the cradle.
Introduction
You should connect your fēnix 3 device to a smartphone to use
the full features of the device.
1 Go to garmin.com/apps, and download the Garmin Connect™
Mobile app to your smartphone.
2 Bring your smartphone within 10 m (33 ft.) of your device.
3 On the fēnix 3 device, hold UP.
4 Select Settings > Bluetooth > Pair Mobile Device.
5 On your smartphone, open the Garmin Connect Mobile app.
6 Select an option to add your device to your Garmin Connect
account:
• If this is the first time you are pairing a device with the
Garmin Connect Mobile app, follow the on-screen
instructions.
• If you already paired another device with the Garmin
Connect Mobile app, from the settings menu, select
Garmin Devices > , and follow the on-screen
instructions.
Support and Updates
Garmin Express™ (www.garmin.com/express) provides easy
access to these services for Garmin devices.
• Product registration
• Product manuals
• Software updates
• Data uploads to Garmin Connect
®
Setting Up Garmin Express
1 Connect the device to your computer using a USB cable.
2 Go to www.garmin.com/express.
3 Follow the on-screen instructions.
Heart Rate Features
This manual is for fēnix 3 models compatible with heart rate
monitors and for wrist-based heart rate models. You must have
a heart rate monitor to use the features described in this section.
fēnix 3: This device is compatible with ANT+ heart rate
monitors.
fēnix 3 HR: This device has a wrist-based heart rate monitor
and is also compatible with ANT+ heart rate monitors. You
®
can view wrist-based heart rate data on the heart rate widget.
If both wrist-based heart rate and ANT+ heart rate data are
available, your device uses the ANT+ heart rate data.
Wrist-based Heart Rate
Wearing the Device and Heart Rate
• Wear the fēnix 3 device above your wrist bone.
NOTE: The device should be snug but comfortable, and it
should not move while running.
NOTE: You can view only the heart rate widget while
broadcasting heart rate data.
3 Pair your fēnix 3 device with your Garmin ANT+ compatible
device.
NOTE: The pairing instructions differ for each Garmin
compatible device. See your owner's manual.
TIP: To stop broadcasting your heart rate data, select any
key, and select Yes.
Turning Off the Wrist Heart Rate Monitor
For the fēnix 3 HR, the default value for the Wrist Heart Rate
setting is Auto. The device automatically uses the wrist-based
heart rate monitor unless you pair an ANT+ heart rate monitor to
the device.
1 Hold UP.
2 Select Settings > Sensors > Wrist Heart Rate > Off.
Putting On the Heart Rate Monitor
You should wear the heart rate monitor directly on your skin, just
below your sternum. It should be snug enough to stay in place
during your activity.
1 If necessary, attach the strap extender to the heart rate
monitor.
2 Wet the electrodes À on the back of the heart rate monitor to
create a strong connection between your chest and the
transmitter.
AF
• Do not damage the heart rate sensor on the back of the
device.
• See Tips for Erratic Heart Rate Data, page 2 for more
information about wrist-based heart rate.
Tips for Erratic Heart Rate Data
If the heart rate data is erratic or does not appear, you can try
these tips.
• Clean and dry your arm before putting on the device.
• Avoid wearing sunscreen under the device.
• Wear the device above your wrist bone. The device should
be snug but comfortable.
NOTE: You can try wearing the device higher on your
forearm. You can try wearing the device on your other arm.
• Warm up for 5 to 10 minutes and get a heart rate reading
before starting your activity.
NOTE: In cold environments, warm up indoors.
• Rinse the device with fresh water after each workout.
3 Wear the heart rate monitor with the Garmin logo facing rightside up.
Viewing the Heart Rate Widget
The widget displays your current heart rate in beats per minute
(bpm), your lowest resting heart rate for today, and a graph of
your heart rate.
1 From the clock, select DOWN.
The loop Á and hook  connection should be on your right
side.
4 Wrap the heart rate monitor around your chest, and connect
the strap hook to the loop.
NOTE: Make sure the care tag does not fold over.
After you put on the heart rate monitor, it is active and sending
data.
Tips for Erratic Heart Rate Data
2 Select START to view your average resting heart rate values
for the last 7 days.
Broadcasting Heart Rate Data to Garmin Devices
You can broadcast your heart rate data from your fēnix 3 device
and view it on paired Garmin devices. For example, you can
broadcast your heart rate data to an Edge device while cycling,
or to a VIRB action camera during an activity.
NOTE: Broadcasting heart rate data decreases battery life.
1 Hold UP.
2 Select Settings > Sensors > Wrist Heart Rate > Broadcast
HR.
The fēnix 3 device starts broadcasting your heart rate data,
and
appears.
®
®
If the heart rate data is erratic or does not appear, you can try
these tips.
• Reapply water to the electrodes and contact patches (if
applicable).
• Tighten the strap on your chest.
• Warm up for 5 to 10 minutes.
• Follow the care instructions (Caring for the Heart Rate
Monitor, page 22).
• Wear a cotton shirt or thoroughly wet both sides of the strap.
Synthetic fabrics that rub or flap against the heart rate
monitor can create static electricity that interferes with heart
rate signals.
Heart Rate Features
• Move away from sources that can interfere with your heart
rate monitor.
Sources of interference may include strong electromagnetic
fields, some 2.4 GHz wireless sensors, high-voltage power
lines, electric motors, ovens, microwave ovens, 2.4 GHz
cordless phones, and wireless LAN access points.
Running Dynamics
Training with Running Dynamics
Before you can view running dynamics, you must put on the
HRM-Run accessory and pair it with your device (Pairing ANT+
Sensors, page 20). If your fēnix 3 was packaged with the
accessory, the devices are already paired, and the fēnix 3 is set
to display running dynamics.
1 Select an option:
• If your HRM-Run accessory and fēnix 3 device are already
paired, skip to step 8.
• If your HRM-Run accessory and fēnix 3 device are not
already paired, complete all the steps in this procedure.
2 Hold UP.
3 Select Settings > Apps.
4 Select an activity.
5 Select Data Screens.
6 Select a running dynamics data screen.
NOTE: The running dynamics screens are not available for
all activities.
7 Select Status > Enabled.
8 Go for a run (Going for a Run, page 6).
9 Select UP or DOWN to open a running dynamics screen to
view your metrics.
AF
You can use your compatible fēnix 3 device paired with the
HRM-Run™ accessory to provide real-time feedback about your
running form. If your fēnix 3 device was packaged with the
HRM-Run accessory, the devices are already paired.
The HRM-Run accessory has an accelerometer in the module
that measures torso movement in order to calculate six running
metrics.
Cadence: Cadence is the number of steps per minute. It
displays the total steps (right and left combined).
Vertical oscillation: Vertical oscillation is your bounce while
running. It displays the vertical motion of your torso,
measured in centimeters for each step.
Ground contact time: Ground contact time is the amount of
time in each step that you spend on the ground while
running. It is measured in milliseconds.
NOTE: Ground contact time is not available while walking.
Ground contact time balance: Ground contact time balance
displays the left/right balance of your ground contact time
while running. It displays a percentage. For example, 53.2
with an arrow pointing left or right.
Stride length: Stride length is the length of your stride from one
footfall to the next. It is measured in meters.
Vertical ratio: Vertical ratio is the ratio of vertical oscillation to
stride length. It displays a percentage. A lower number
typically indicates better running form.
Color Gauges and Running Dynamics Data
The running dynamics screens display a color gauge for the primary metric. You can display cadence, vertical oscillation, ground
contact time, ground contact time balance, or vertical ratio as the primary metric. The color gauge shows you how your running
dynamics data compare to those of other runners. The color zones are based on percentiles.
Garmin has researched many runners of all different levels. The data values in the red or orange zones are typical for less
experienced or slower runners. The data values in the green, blue, or purple zones are typical for more experienced or faster
runners. More experienced runners tend to exhibit shorter ground contact times, lower vertical oscillation, lower vertical ratio, and
higher cadence than less experienced runners. However, taller runners typically have slightly slower cadences, longer strides, and
slightly higher vertical oscillation. Vertical ratio is your vertical oscillation divided by stride length. It is not correlated with height.
NOTE: The color gauge for ground contact time balance is different (Ground Contact Time Balance Data, page 3).
Go to www.garmin.com for more information on running dynamics. For additional theories and interpretations of running dynamics
data, you can search reputable running publications and websites.
Color Zone Percentile in Zone Cadence Range Vertical Oscillation Range Vertical Ratio Ground Contact Time Range
>95
>183 spm
<6.4 cm
<6.1%
<218 ms
Blue
70–95
174–183 spm
6.4–8.1 cm
6.1–7.4%
218–248 ms
Green
30–69
164–173 spm
8.2–9.7 cm
7.5–8.6%
249–277 ms
Orange 5–29
153–163 spm
9.8–11.5 cm
8.7–10.1%
278–308 ms
Red
<153 spm
>11.5 cm
>10.1%
>308 ms
Purple
<5
Ground Contact Time Balance Data
Ground contact time balance measures your running symmetry and appears as a percentage of your total ground contact time. For
example, 51.3% with an arrow pointing left indicates the runner is spending more time on the ground when on the left foot. If your
data screen displays both numbers, for example 48–52, 48% is the left foot and 52% is the right foot.
Color Zone
Red
Orange
Green
Orange
Red
Symmetry
Poor
Fair
Good
Fair
Poor
Percent of Other Runners
5%
25%
40%
25%
5%
Ground Contact Time Balance >52.2% L 50.8–52.2% L 50.7% L–50.7% R 50.8–52.2% R >52.2% R
While developing and testing running dynamics, the Garmin team found correlations between injuries and greater imbalances with
certain runners. For many runners, ground contact time balance tends to deviate further from 50–50 when running up or down hills.
Most running coaches agree that a symmetrical running form is good. Elite runners tend to have quick and balanced strides.
Heart Rate Features
You can watch the color gauge or data field during your run or view the summary on your Garmin Connect account after your run.
As with the other running dynamics data, ground contact time balance is a quantitative measurement to help you learn about your
running form.
Tips for Missing Running Dynamics Data
If running dynamics data does not appear, you can try these
tips.
• Make sure you have the HRM-Run accessory.
Accessories with running dynamics have on the front of the
module.
• Pair the HRM-Run accessory with your fēnix 3 device again,
according to the instructions.
• If the running dynamics data display shows only zeros, make
sure the heart rate monitor is worn right-side up.
NOTE: Ground contact time and balance appears only while
running. It is not calculated while walking.
Physiological Measurements
Superior
Blue
Excellent
Green
Good
Orange
Fair
Red
Poor
VO2 max. data and analysis is provided with permission from
The Cooper Institute . For more information, see the appendix
(VO2 Max. Standard Ratings, page 26), and go to
www.CooperInstitute.org.
®
AF
These physiological measurements require a compatible heart
rate monitor. The measurements are estimates that can help
you track and understand your training activities and race
performances. These estimates are provided and supported by
Firstbeat.
NOTE: The estimates may seem inaccurate at first. The device
requires you to complete a few activities to learn about your
performance.
VO2 max.: VO2 max. is the maximum volume of oxygen (in
milliliters) you can consume per minute per kilogram of body
weight at your maximum performance.
Predicted race times: Your device uses the VO2 max. estimate
and published data sources to provide a target race time
based on your current state of fitness. This projection also
presumes you have completed the proper training for the
race.
Recovery advisor: The recovery advisor displays how much
time remains before you are fully recovered and ready for the
next hard workout.
Stress score: Stress score measures your heart rate variability
while standing still for 3 minutes. It provides your overall
stress level. The scale is 1 to 100, and a lower score
indicates a lower stress level.
Performance condition: Your performance condition is a realtime assessment after 6 to 20 minutes of activity. It can be
added as a data field so you can view your performance
condition during the rest of your activity. It compares your
real-time condition to your average fitness level.
Lactate threshold: Lactate threshold is the point where your
muscles start to rapidly fatigue. Your device measures your
lactate threshold level using heart rate and pace.
Purple
About VO2 Max. Estimates
VO2 max. is the maximum volume of oxygen (in milliliters) you
can consume per minute per kilogram of body weight at your
maximum performance. In simple terms, VO2 max. is an
indication of athletic performance and should increase as your
level of fitness improves. The fēnix 3 device has separate VO2
max. estimates for running and cycling. You can use your
Garmin device paired with a compatible heart rate monitor and
power meter to display your cycling VO2 max. estimate. You
can use your Garmin device paired with a compatible heart rate
monitor to display your running VO2 max. estimate.
Your VO2 max. estimate appears as a number and position on
the color gauge.
Getting Your VO2 Max. Estimate for Running
Before you can view your VO2 max. estimate, you must put on
the heart rate monitor and pair it with your device (Pairing ANT+
Sensors, page 20). If your fēnix 3 device was packaged with a
heart rate monitor, the devices are already paired. For the most
accurate estimate, complete the user profile setup (Setting Up
Your User Profile, page 9), and set your maximum heart rate
(Setting Your Heart Rate Zones, page 9).
NOTE: The estimate may seem inaccurate at first. The device
requires a few runs to learn about your running performance.
1 Run for at least 10 minutes outdoors.
2 After your run, select Save.
3 Hold UP.
4 Select My Stats > VO2 Max. > Running.
Getting Your VO2 Max. Estimate for Cycling
Before you can view your VO2 max. estimate, you must put on
the heart rate monitor, install the power meter, and pair them
with your fēnix 3 device (Pairing ANT+ Sensors, page 20). If
your fēnix 3 device was packaged with a heart rate monitor, the
devices are already paired. For the most accurate estimate,
complete the user profile setup (Setting Up Your User Profile,
page 9) and set your maximum heart rate (Setting Your Heart
Rate Zones, page 9).
NOTE: The estimate may seem inaccurate at first. The device
requires a few rides to learn about your cycling performance.
1 Ride at a steady, high intensity for at least 20 minutes
outdoors.
2 After your ride, select Save.
3 Hold UP.
4 Select My Stats > VO2 Max. > Cycling.
Viewing Your Predicted Race Times
This feature requires a heart rate monitor.
For the most accurate estimate, complete the user profile setup
(Setting Up Your User Profile, page 9), and set your
maximum heart rate (Setting Your Heart Rate Zones,
page 9). Your device uses the VO2 max. estimate (About
VO2 Max. Estimates, page 4) and published data sources to
provide a target race time based on your current state of fitness.
This projection also presumes you have completed the proper
training for the race.
NOTE: The projections may seem inaccurate at first. The device
requires a few runs to learn about your running performance.
Heart Rate Features
Select UP > My Stats > Race Predictor.
Your projected race times appear for 5K, 10K, half marathon,
and marathon distances.
Recovery Advisor
You can use your Garmin device with a heart rate monitor to
display how much time remains before you are fully recovered
and ready for the next hard workout.
Recovery time: The recovery time appears immediately
following an activity. The time counts down until it is optimal
for you to attempt another hard workout.
Recovery Heart Rate
If you are training with a heart rate monitor, you can check your
recovery heart rate value after each activity. Recovery heart rate
is the difference between your exercising heart rate and your
heart rate two minutes after the exercise has stopped. For
example, after a typical training run, you stop the timer. Your
heart rate is 140 bpm. After two minutes of no activity or cool
down, your heart rate is 90 bpm. Your recovery heart rate is 50
bpm (140 minus 90). Some studies have linked recovery heart
rate to cardiac health. Higher numbers generally indicate
healthier hearts.
TIP: For best results, you should stop moving for two minutes
while the device calculates your recovery heart rate value. You
can save or discard the activity after this value appears.
Lactate Threshold
Lactate threshold is the exercise intensity at which lactate (lactic
acid) starts to accumulate in the bloodstream. In running, it is
the estimated level of effort or pace. When a runner exceeds the
threshold, fatigue starts to increase at an accelerating rate. For
experienced runners, the threshold occurs at approximately 90%
of their maximum heart rate and between 10k and half-marathon
race pace. For average runners, the lactate threshold often
occurs well below 90% of maximum heart rate. Knowing your
lactate threshold can help you determine how hard to train or
when to push yourself during a race.
If you already know your lactate threshold heart rate value, you
can enter it in your user profile settings (Setting Your Heart Rate
Zones, page 9).
Performing a Guided Test to Determine Your Lactate
Threshold
Before you can perform the guided test, you must put on a heart
rate monitor and pair it with your device (Pairing ANT+ Sensors,
page 20). You must also have a VO2 max. estimate from a
previous run (About VO2 Max. Estimates, page 4).
TIP: The device requires a few runs with a heart rate monitor to
get an accurate maximum heart rate value and VO2 max.
estimate.
1 Hold UP.
2 Select My Stats > Lactate Threshold > Do Guided Test.
3 Select an outdoor running profile.
GPS is required to complete the test.
4 Follow the on-screen instructions.
Activities
Viewing Your Performance Condition
Your device analyzes your performance condition based on
heart rate and power data. You can use an ANT+ heart rate
monitor or a device with wrist-based heart rate.
1 If necessary, pair your compatible ANT+ sensor with your
fēnix 3 device (Pairing ANT+ Sensors, page 20).
2 Add Perform. Cond. to a data screen (Customizing the Data
Screens, page 17).
Go
for a run or ride.
After 6 to 20 minutes, your performance condition appears.
4 Scroll to the data screen to view your performance condition
throughout the run or ride.
AF
Turning On the Recovery Advisor
For the most accurate estimate, complete the user profile setup
(Setting Up Your User Profile, page 9), and set your
maximum heart rate (Setting Your Heart Rate Zones,
page 9).
1 Hold UP.
2 Select My Stats > Recovery Advisor > Status > On.
3 Go for a run.
After 6 to 20 minutes, your performance condition appears
(Viewing Your Performance Condition, page 5).
4 After your run, select Save.
The recovery time appears. The maximum time is 4 days.
Performance Condition
As you complete your activity, such as running or cycling, the
performance condition feature analyzes your pace, heart rate,
and heart rate variability to make a real-time assessment of your
ability to perform compared to your average fitness level.
Performance condition values range from -20 to +20. After the
first 6 to 20 minutes of your activity, the device displays your
performance condition score. For example, a score of +5 means
that you are rested, fresh, and capable of a good run or ride.
You can add performance condition as a data field to one of
your training screens to monitor your ability throughout the
activity. Performance condition can also be an indicator of
fatigue level, especially at the end of a long training run or ride.
NOTE: The device requires a few runs or rides with a heart rate
monitor to get an accurate VO2 max. estimate and learn about
your running or riding ability (About VO2 Max. Estimates,
page 4).
Stress Score
Stress score is the result of a three-minute test performed while
standing still, where the fēnix 3 device analyzes heart rate
variability to determine your overall stress. Training, sleep,
nutrition, and general life stress all impact how a runner
performs. The stress score range is from 1 to 100, where 1 is a
very low stress state and 100 is a very high stress state.
Knowing your stress score can help you decide if your body is
ready for a tough training run or yoga.
Viewing Your Stress Score
Before you can view your stress score, you must put on a heart
rate monitor, pair it with your device (Pairing ANT+ Sensors,
page 20), and show the stress score app in the apps list
(Activity App Settings, page 17).
TIP: Garmin recommends that you measure your stress score at
approximately the same time and under the same conditions
every day.
1 From the clock, select START.
2 Select Stress Score.
3 Select START.
4 Stand still, and rest for 3 minutes.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect community.
You can also add Connect IQ™ activity apps to your device using
your Garmin Connect account (Connect IQ Features,
page 16).
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1 From the clock, select START.
2 Select an activity.
3 If necessary, follow the on-screen instructions to enter
additional information.
4 If necessary, wait while the device connects to your ANT+
sensors.
5 If the activity requires GPS, go outside, and wait while the
device locates satellites.
6 Select START to start the timer.
NOTE: The device does not record your activity data until
you start the timer.
Viewing Your Ski Runs
Your device records the details of each skiing or snowboarding
run. You can view run details from the paused screen or while
the timer is running.
1 Start a skiing or snowboarding activity.
2 Hold UP.
3 Select View Runs.
4 Select UP and DOWN to view details of your last run, your
current run, and your total runs.
The run screens include time, distance traveled, maximum
speed, average speed, and total descent.
Stopping an Activity
Hiking
NOTE: Some options are not available for some activities.
Going for a Hike
1 Select STOP.
Before you go for a hike, you should charge the device
(Charging the Device, page 1).
1 From the clock, select START.
2 Select Hike.
3 Go outside, and wait while the device locates satellites.
4 Select START to start the timer.
History is recorded only while the timer is running.
5 Start your activity.
The device records a track while you hike.
6 When you need to take a break or pause the device from
tracking, select STOP > Resume Later.
The device saves the status of your hike and enters low
power mode.
7 Select START > Hike > Resume to resume tracking.
8 Select UP or DOWN to view additional data pages (optional).
9 After you complete your activity, select STOP > Save.
Skiing
AF
If you do not save the activity manually after stopping the
activity, the device saves it automatically after 25 minutes
have passed.
2 Select an option:
• To resume your activity, select Resume.
• To save the activity and return to watch mode, select
Save.
• To discard the activity and return to watch mode, select
Discard.
• To follow your track back to the starting point of your
activity, select TracBack.
• To suspend your activity and resume it at a later time,
select Resume Later.
Going Cross-Country Skiing
Before you go skiing, you should charge the device (Charging
the Device, page 1).
1 From the clock, select START.
2 Select XC Ski.
3 Go outside, and wait while the device locates satellites.
4 Select START to start the timer.
History is recorded only while the timer is running.
Start
your activity.
6 Select LAP to record laps (optional).
7 Select UP or DOWN to view additional data pages (optional).
8 After you complete your activity, select STOP > Save.
Going Downhill Skiing or Snowboarding
Before you go skiing or snowboarding, you should charge the
device (Charging the Device, page 1).
1 From the clock, select START.
2 Select Ski / Board.
3 Go outside, and wait while the device locates satellites.
4 Select START to start the timer.
History is recorded only while the timer is running.
5 Start your activity.
The auto run feature is turned on by default. This feature
automatically records new ski runs based on your movement.
The timer pauses when you stop moving downhill and when
you are on a chairlift. The timer remains paused during the
chairlift ride.
6 If necessary, start moving downhill to restart the timer.
7 Select UP or DOWN to view additional data pages (optional).
8 After you complete your activity, select STOP > Save.
Running
Going for a Run
Before you go for a run, you should charge the device (Charging
the Device, page 1). Before you can use an ANT+ sensor for
your run, you must pair the sensor with your device (Pairing
ANT+ Sensors, page 20).
1 Put on your ANT+ sensors, such as a foot pod or heart rate
monitor (optional).
2 From the clock, select START.
3 Select Run.
4 When using optional ANT+ sensors, wait while the device
connects to the sensors.
5 Go outside, and wait while the device locates satellites.
6 Select START to start the timer.
History is recorded only while the timer is running.
7 Start your activity.
8 Select LAP to record laps (optional).
9 Select UP or DOWN to view additional data pages (optional).
10 After you complete your activity, select STOP > Save.
Using the Metronome
The metronome feature plays tones at a steady rhythm to help
you improve your performance by training at a faster, slower, or
more consistent cadence.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
Activities
4 Select Metronome > Status > On.
5 Select an option:
• Select Beats / Minute to enter a value based on the
cadence you want to maintain.
• Select Alert Frequency to customize the frequency of the
beats.
• Select Sounds to customize the metronome tone and
vibration.
6 If necessary, select Preview to listen to the metronome
feature before you run.
Hold
DOWN to return to the clock.
8 Go for a run (Going for a Run, page 6).
The metronome starts automatically.
9 During your run, select UP or DOWN to view the metronome
screen.
10 If necessary, hold UP to change the metronome settings.
Interval: One or more consecutive lengths. A new interval starts
after a rest.
Stroke: A stroke is counted every time your arm wearing the
device completes a full cycle.
Swolf: Your swolf score is the sum of the time for one pool
length and the number of strokes for that length. For
example, 30 seconds plus 15 strokes equals a swolf score of
45. For open water swimming, swolf is calculated over 25
meters. Swolf is a measurement of swimming efficiency and,
like golf, a lower score is better.
Stroke Types
Stroke type identification is available only for pool swimming.
Your stroke type is identified at the end of a length. Stroke types
appear when you are viewing interval history. You can also
select stroke type as a custom data field (Customizing the Data
Screens, page 17).
Free
Freestyle
Back
Backstroke
Biking
Breast Breaststroke
Going for a Ride
Mixed More than one stroke type in an interval
Before you go for a ride, you should charge the device
(Charging the Device, page 1). Before you can use an ANT+
sensor for your ride, you must pair the sensor with your device
(Pairing ANT+ Sensors, page 20).
1 Pair your ANT+ sensors, such as a heart rate monitor, speed
sensor, or cadence sensor (optional).
2 From the clock, select START.
3 Select Bike.
4 When using optional ANT+ sensors, wait while the device
connects to the sensors.
5 Go outside, and wait while the device locates satellites.
6 Select START to start the timer.
History is recorded only while the timer is running.
7 Start your activity.
8 Select UP or DOWN to view additional data pages (optional).
9 After you complete your activity, select STOP > Save.
Swimming
NOTICE
The device is intended for surface swimming. Scuba diving with
the device may damage the product and will void the warranty.
NOTE: The device cannot record heart rate data while
swimming.
Going for a Pool Swim
Before you go for a swim, you should charge the device
(Charging the Device, page 1).
1 From the clock, select START.
2 Select Pool Swim.
3 Select your pool size, or enter a custom size.
4 Select START to start the timer.
History is recorded only while the timer is running.
5 Start your activity.
The device automatically records swim intervals and lengths.
6 Select UP or DOWN to view additional data pages (optional).
7 When resting, select LAP to pause the timer.
8 Select LAP to restart the timer.
9 After you complete your activity, select STOP > Save.
Swim Terminology
Length: One trip down the pool.
Activities
Butterfly
AF
Fly
Drill
Used with drill logging (Training with the Drill Log, page 7)
Resting During Pool Swimming
The default rest screen displays two rest timers. It also displays
time and distance for the last completed interval.
NOTE: Swim data is not recorded during a rest.
1 During your swim activity, select LAP to start a rest.
The display reverses to white text on a black background,
and the rest screen appears.
2 During a rest, select UP or DOWN to view other data screens
(optional).
Select
LAP, and continue swimming.
4 Repeat for additional rest intervals.
Training with the Drill Log
The drill log feature is available only for pool swimming. You can
use the drill log feature to manually record kick sets, one-arm
swimming, or any type of swimming that is not one of the four
major strokes.
TIP: You can customize the data screens and data fields for
your pool swim activity (Customizing the Data Screens,
page 17).
1 From the clock, select START.
2 Select Pool Swim.
3 Select START to start the activity timer.
4 During your pool swim activity, select UP or DOWN to view
the drill log screen.
5 Select LAP to start the drill timer.
6 After you complete a drill interval, select LAP.
The drill timer stops, but the activity timer continues to record
the entire swim session.
7 Select a distance for the completed drill.
Distance increments are based on the pool size selected for
the activity profile.
8 Select an option:
• To start another drill interval, select LAP.
• To start a swim interval, select UP or DOWN to return to
the swim training screens.
9 After you complete your activity, select STOP > Save.
Going for an Open Water Swim
Before you go for a swim, you should charge the device
(Charging the Device, page 1).
1
From the clock, select START.
Select Open Water.
Go outside, and wait while the device locates satellites.
Select START to start the timer.
History is recorded only while the timer is running.
Start your activity.
Select LAP to record an interval (optional).
Select UP or DOWN to view additional data pages (optional).
After you complete your activity, select STOP > Save.
Water Sports
Starting a Stand Up Paddle Boarding Activity
1 Pair your ANT+ sensor, such as a heart rate monitor
(optional).
2 From the clock, select START.
3 Select SUP.
4 When using optional ANT+ sensors, wait while the device
Starting a Rowing Activity
1 Pair your ANT+ sensor, such as a heart rate monitor
(optional).
From the clock, select START.
Select Row.
When using optional ANT+ sensors, wait while the device
connects to the sensors.
Go outside, and wait while the device locates satellites.
Select START to start the timer.
History is recorded only while the timer is running.
Start your activity.
Select UP or DOWN to view additional data pages (optional).
After you complete your activity, select STOP > Save.
Indoor Activities
Creating a Custom Activity
1 Hold UP.
2 Select Settings > Apps > Add New.
3 Select an activity type.
AF
connects to the sensors.
Go outside, and wait while the device locates satellites.
Select START to start the timer.
History is recorded only while the timer is running.
Start your activity.
Select UP or DOWN to view additional data pages (optional).
After you complete your activity, select STOP > Save.
sensor, you must pair the sensor with your device (Pairing ANT+
Sensors, page 20).
1 Pair your ANT+ sensors, such as a foot pod or heart rate
monitor (optional).
From
the clock, select START.
3 Select Triathlon or a custom multisport activity.
4 Go outside, and wait while the device locates satellites.
5 Select START to start the timer.
History is recorded only while the timer is running.
6 Start your first activity.
7 Select LAP to transition to the next activity.
If transitions are turned on, the transition time is recorded
separately from the activity times.
8 If necessary, select LAP to start the next activity.
9 Select UP or DOWN to view additional data pages (optional).
10 After you complete your activity, select STOP > Save.
The fēnix 3 device can be used for training indoors, such as
running on an indoor track or using a stationary bike.
GPS is turned off for indoor activities. When running with GPS
turned off, speed, distance, and cadence are calculated using
the accelerometer in the device. The accelerometer is selfcalibrating. The accuracy of the speed, distance, and cadence
data improves after a few outdoor runs using GPS.
NOTE: If you are creating a custom multisport activity, you
are prompted to select two or more activities and include
transitions.
If necessary, select an accent color.
If necessary, select an icon.
Select a name or enter a custom name.
Duplicate activity names include a number, for example:
Triathlon(2).
Select an option:
• Select Use Default to create your custom activity starting
from the default system settings.
• Select a copy of an existing activity to create your custom
activity starting from one of your saved activities.
If necessary, select the GPS mode.
Select an option:
• Select Done to save and use the custom activity.
• Select Edit Settings to customize specific activity
settings.
Golfing
Playing Golf
Triathletes, duathletes, and other multisport competitors can
take advantage of the multisport activity. During a multisport
activity, you can transition between activities and continue to
view your total time and distance. For example, you can switch
from biking to running and view your total time and distance for
biking and running throughout the multisport activity.
You can customize a multisport activity, or you can use the
default multisport activity set up for a standard triathlon.
Before you play a course for the first time, you must download it
from the Garmin Connect Mobile app (Garmin Connect,
page 15). Courses downloaded from the Garmin Connect
Mobile app are updated automatically. Before you play golf, you
should charge the device (Charging the Device, page 1).
1 From the clock, select START.
2 Select Golf.
3 Go outside, and wait while the device locates satellites.
4 Select a course from the list of available courses.
5 Select UP or DOWN to view additional data pages (optional).
The device automatically transitions when you move to the
next hole.
6 After you complete your activity, select START > End Round
> Yes.
Starting a Triathlon or Multisport Activity
Hole Information
Multisport
Before you start an activity, you should charge the device
(Charging the Device, page 1). Before you can use an ANT+
Because pin locations change, the device calculates the
distance to the front, middle, and back of the green, but not the
actual pin location.
Activities
Training
Setting Up Your User Profile
You can update your gender, birth year, height, weight, heart
rate zone, and power zone settings. The device uses this
information to calculate accurate training data.
1 Hold UP.
2 Select My Stats > User Profile.
3 Select an option.
À
Á
Â
Ã
Ä
Current hole number
Fitness Goals
Distance to the back of the green
Knowing your heart rate zones can help you measure and
improve your fitness by understanding and applying these
principles.
• Your heart rate is a good measure of exercise intensity.
• Training in certain heart rate zones can help you improve
cardiovascular capacity and strength.
• Knowing your heart rate zones can prevent you from
overtraining and can decrease your risk of injury.
If you know your maximum heart rate, you can use the table
(Heart Rate Zone Calculations, page 10) to determine the best
heart rate zone for your fitness objectives.
If you do not know your maximum heart rate, use one of the
calculators available on the Internet. Some gyms and health
centers can provide a test that measures maximum heart rate.
The default maximum heart rate is 220 minus your age.
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Next hole
Previous hole
AF
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes.
Select START > Layups.
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Using the Golf Odometer
You can use the odometer to record the time, distance, and
steps traveled. The odometer automatically starts and stops
when you start or end a round.
1 Select START > Odometer.
2 If necessary, select Reset to reset the odometer to zero.
Keeping Score
1 From the hole information screen, select START > Start
Scoring.
The scorecard appears when you are on the green.
2 Select DOWN or UP to set the score.
Your total score À is updated.
Reviewing Scores
1 Select START > Scorecard, and select a hole.
2 Select DOWN or UP to change the score for that hole.
Measuring a Shot
1 Take a shot, and watch where your ball lands.
2 Select START > Measure Shot.
3 Walk or drive to your ball.
The distance automatically resets when you move to the next
hole.
4 If necessary, select Reset to reset the distance at any time.
Training
About Heart Rate Zones
Many athletes use heart rate zones to measure and increase
their cardiovascular strength and improve their level of fitness. A
heart rate zone is a set range of heartbeats per minute. The five
commonly accepted heart rate zones are numbered from 1 to 5
according to increasing intensity. Generally, heart rate zones are
calculated based on percentages of your maximum heart rate.
Setting Your Heart Rate Zones
The device uses your user profile information from the initial
setup to determine your default heart rate zones. The device
has separate heart rate zones for running, cycling, and
swimming. For the most accurate calorie data during your
activity, set your maximum heart rate. You can also set each
heart rate zone and enter your resting heart rate manually. You
can manually adjust your zones on the device or using your
Garmin Connect account.
1 Hold UP.
2 Select My Stats > User Profile > Heart Rate Zones.
3 Select Default to view the default values (optional).
The default values can be applied to running, cycling, and
swimming.
4 Select Running, Cycling, or Swimming.
5 Select Preference > Set Custom.
6 Select Max. HR, and enter your maximum heart rate.
7 Select LTHR, and enter your lactate threshold heart rate.
You can perform a guided test to estimate your lactate
threshold (Lactate Threshold, page 5).
8 Select Resting HR, and enter your resting heart rate.
9 Select Zones > Based On.
10 Select an option:
• Select BPM to view and edit the zones in beats per
minute.
• Select %Max. HR to view and edit the zones as a
percentage of your maximum heart rate.
• Select %HRR to view and edit the zones as a percentage
of your heart rate reserve (maximum heart rate minus
resting heart rate).
• Select %LTHR to view and edit the zones as a percentage
of your lactate threshold heart rate.
11 Select a zone, and enter a value for each zone.
Letting the Device Set Your Heart Rate Zones
The default settings allow the device to detect your maximum
heart rate and set your heart rate zones as a percentage of your
maximum heart rate.
• Verify that your user profile settings are accurate (Setting Up
Your User Profile, page 9).
• Run often with your compatible heart rate monitor.
• Try a few heart rate training plans, available from your
Garmin Connect account.
• View your heart rate trends and time in zones using your
Garmin Connect account.
Heart Rate Zone Calculations
Perceived Exertion
Benefits
50–60%
Relaxed, easy pace,
rhythmic breathing
Beginning-level
aerobic training,
reduces stress
60–70%
Comfortable pace,
slightly deeper
breathing, conversation
possible
Basic cardiovascular
training, good
recovery pace
70–80%
Moderate pace, more
difficult to hold
conversation
Improved aerobic
capacity, optimal
cardiovascular training
80–90%
Fast pace and a bit
Improved anaerobic
uncomfortable, breathing capacity and
forceful
threshold, improved
speed
90–100%
Sprinting pace,
unsustainable for long
period of time, labored
breathing
Using the Move Alert
Before you can use the move alert, you must turn on activity
tracking and the move alert (Turning On Activity Tracking,
page 10).
Sitting for prolonged periods of time can trigger undesirable
metabolic state changes. The move alert reminds you to keep
moving. After one hour of inactivity, Move! and the red bar
appear. The device also beeps or vibrates if audible tones are
turned on (System Settings, page 20).
Go for a short walk (at least a couple of minutes) to reset the
move alert.
AF
Zone % of
Maximum
Heart Rate
burned, and sleep statistics for each recorded day. Your calories
burned includes your base metabolism plus activity calories.
Activity tracking can be enabled during the initial device setup,
or at any time.
NOTE: Turning on activity tracking can decrease the battery life
between charges.
1 Hold UP.
2 Select Settings > Activity Tracking > Status > On.
Your step count does not appear until the device locates
satellites and sets the time automatically. The device may
need a clear view of the sky to locate satellite signals.
The number of steps taken during the day appears on an activity
tracking widget. The step count is updated periodically.
Auto Goal
Your device creates a daily step goal automatically, based on
your previous activity levels. As you move during the day, the
device shows your progress toward your daily goal À.
Anaerobic and
muscular endurance,
increased power
About Lifetime Athletes
A lifetime athlete is an individual who has trained intensely for
many years (with the exception of minor injuries) and has a
resting heart rate of 60 beats per minute (bpm) or less.
If you choose not to use the auto goal feature, you can set a
personalized step goal on your Garmin Connect account.
Setting Your Power Zones
While you are sleeping, the device monitors your movement.
Sleep statistics include total hours of sleep, sleep levels, and
sleep movement. You can set your normal sleep hours in the
user settings on your Garmin Connect account. You can view
your sleep statistics on your Garmin Connect account.
The values for the zones are default values and may not match
your personal abilities. If you know your functional threshold
power (FTP) value, you can enter it and allow the software to
calculate your power zones automatically. You can manually
adjust your zones on the device or using your Garmin Connect
account.
1 Hold UP.
2 Select My Stats > User Profile > Power Zones > Based
On.
3 Select an option:
• Select Watts to view and edit the zones in watts.
• Select % FTP to view and edit the zones as a percentage
of your functional threshold power.
4 Select FTP, and enter your FTP value.
5 Select a zone, and enter a value for each zone.
6 If necessary, select Minimum, and enter a minimum power
value.
Activity Tracking
Turning On Activity Tracking
Sleep Tracking
Using Automated Sleep Tracking
Before you can use automated sleep tracking, you must turn on
activity tracking (Turning On Activity Tracking, page 10).
1 Wear your device while sleeping.
2 Upload your sleep tracking data to the Garmin Connect site
(Using Garmin Connect on Your Computer, page 16).
You can view your sleep statistics on your Garmin Connect
account.
Using Do Not Disturb Mode
You can use do not disturb mode to turn off the backlight and
vibration alerts. For example, you can use this mode while
sleeping or watching a movie.
1 Hold LIGHT.
2 Select Do Not Disturb > On.
TIP: To exit do not disturb mode, hold LIGHT, and select Do
Not Disturb > Off.
The activity tracking feature records your daily step count,
distance traveled, intensity minutes, floors climbed, calories
10
Training
Intensity Minutes
To improve your health, organizations such as the U.S. Centers
for Disease Control and Prevention, the American Heart
Association , and the World Health Organization, recommend at
least 150 minutes per week of moderate intensity activity, such
as brisk walking, or 75 minutes per week of vigorous intensity
activity, such as running.
The device monitors your activity intensity and tracks your time
spent participating in moderate to vigorous intensity activities.
You can work toward achieving your weekly intensity minutes
goal by participating in at least 10 consecutive minutes of
moderate to vigorous intensity activities.
®
Workouts
You can create custom workouts that include goals for each
workout step and for varied distances, times, and calories. You
can create workouts using Garmin Connect or select a training
plan that has built-in workouts from Garmin Connect, and
transfer them to your device.
You can schedule workouts using Garmin Connect. You can
plan workouts in advance and store them on your device.
Before you can download a workout from Garmin Connect, you
must have a Garmin Connect account (Garmin Connect,
page 15).
1 Connect the device to your computer.
2 Go to www.garminconnect.com.
3 Create and save a new workout.
4 Select Send to Device, and follow the on-screen
instructions.
5 Disconnect the device.
Starting a Workout
Interval Workouts
You can create interval workouts based on distance or time. The
device saves your custom interval workout until you create
another interval workout. You can use open intervals for track
workouts and when you are running a known distance. When
you select LAP, the device records an interval and moves to a
rest interval.
Creating an Interval Workout
1 Hold UP.
2 Select Training > Intervals > Edit > Interval > Type.
3 Select Distance, Time, or Open.
TIP: You can create an open-ended interval by selecting the
Open option.
4 Select Duration, enter a distance or time interval value for
the workout, and select .
5 Select BACK.
6 Select Rest > Type.
7 Select Distance, Time, or Open.
8 If necessary, enter a distance or time value for the rest
interval, and select .
9 Select BACK.
10 Select one or more options:
• To set the number of repetitions, select Repeat.
• To add an open-ended warm up to your workout, select
Warm Up > On.
• To add an open-ended cool down to your workout, select
Cool Down > On.
AF
Following a Workout From the Web
3 Select and schedule a training plan.
4 Review the training plan in your calendar.
5 Select , and follow the on-screen instructions.
Before you can start a workout, you must download a workout
from your Garmin Connect account.
1 Hold UP.
2 Select Training > My Workouts.
3 Select a workout.
4 Select Do Workout.
5 If necessary, select an activity type.
6 Select START to start the timer.
After you begin a workout, the device displays each step of the
workout, the target (optional), and the current workout data.
Starting an Interval Workout
1 Hold UP.
2 Select Training > Intervals > Do Workout.
3 Select an activity.
4 Select START to start the timer.
5 When your interval workout has a warm up, select LAP to
begin the first interval.
6 Follow the on-screen instructions.
After you complete all of the intervals, a message appears.
About the Training Calendar
Stopping an Interval Workout
The training calendar on your device is an extension of the
training calendar or schedule you set up in Garmin Connect.
After you have added a few workouts to the Garmin Connect
calendar, you can send them to your device. All scheduled
workouts sent to the device appear in the training calendar list
by date. When you select a day in the training calendar, you can
view or do the workout. The scheduled workout stays on your
device whether you complete it or skip it. When you send
scheduled workouts from Garmin Connect, they overwrite the
existing training calendar.
• At any time, select LAP to end an interval.
• At any time, select STOP to stop the timer.
• If you added a cool down to your interval workout, select LAP
to end the interval workout.
Using Garmin Connect Training Plans
Before you can download and use a training plan from Garmin
Connect, you must have a Garmin Connect account (Garmin
Connect, page 15).
You can browse Garmin Connect to find a training plan,
schedule workouts and courses, and download the plan to your
device.
1 Connect the device to your computer.
2 Go to www.garminconnect.com.
Training
Using Virtual Partner
®
Your Virtual Partner is a training tool designed to help you meet
your goals. You can set a pace for the Virtual Partner and race
against it.
NOTE: This feature is not available for all activities.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
4 Select Data Screens > Virtual Partner > Status > On.
5 Select Set Pace or Set Speed.
6 Enter a value.
7 Begin your activity.
11
8 Select UP or DOWN to scroll to the Virtual Partner screen
and see who is leading.
Setting a Training Target
You can set each personal record back to the one previously
recorded.
1 Hold UP.
2 Select My Stats > Records.
3 Select a sport.
4 Select a record to restore.
5 Select Previous > Yes.
NOTE: This does not delete any saved activities.
Clearing a Personal Record
1 Hold UP.
2 Select My Stats > Records.
3 Select a sport.
4 Select a record to delete.
5 Select Clear Record > Yes.
NOTE: This does not delete any saved activities.
Clearing All Personal Records
1 Hold UP.
2 Select My Stats > Records.
AF
The training target feature works with the Virtual Partner feature
so you can train toward a set distance, distance and time,
distance and pace, or distance and speed goal. During your
training activity, the device gives you real-time feedback about
how close you are to achieving your training target.
1 Hold UP.
2 Select Training > Set a Target.
3 Select an activity.
4 Select an option:
• Select Distance Only to select a preset distance or enter
a custom distance.
• Select Distance and Time to select a distance and time
target.
• Select Distance and Pace or Distance and Speed to
select a distance and pace or speed target.
The training target screen appears and displays your
estimated finish time. The estimated finish time is based on
your current performance and the time remaining.
5 Select START to start the timer.
6 After you complete your activity, select STOP > Save.
Restoring a Personal Record
Cancelling a Training Target
1 During an activity, hold UP.
2 Select Training > Cancel Target > Yes.
Racing a Previous Activity
You can race a previously recorded or downloaded activity. This
feature works with the Virtual Partner feature so you can see
how far ahead or behind you are during the activity.
NOTE: This feature is not available for all activities.
1 Hold UP.
2 Select Training > Race an Activity.
3 Select an option:
• Select From History to select a previously recorded
activity from your device.
• Select Downloaded to select an activity you downloaded
from your Garmin Connect account.
4 Select the activity.
The Virtual Partner screen appears indicating your estimated
finish time.
5 Select START to start the timer.
6 After you complete your activity, select STOP > Save.
Personal Records
When you complete an activity, the device displays any new
personal records you achieved during that activity. Personal
records include your fastest time over several typical race
distances and longest run or ride. For cycling, personal records
also include most ascent and best power (power meter
required).
Viewing Your Personal Records
1 Hold UP.
2 Select My Stats > Records.
3 Select a sport.
4 Select a record.
5 Select View Record.
12
NOTE: This does not delete any saved activities.
Select
a sport.
4 Select Clear All Records > Yes.
The records are deleted for that sport only.
About Training Effect
Training Effect measures the impact of an activity on your
aerobic fitness. Training Effect accumulates during the activity.
As the activity progresses, the training effect value increases,
telling you how the activity has improved your fitness. Training
Effect is determined by your user profile information, heart rate,
duration, and intensity of your activity.
It is important to know that your Training Effect numbers (from
1.0 to 5.0) may seem abnormally high during your first few runs.
It takes several activities for the device to learn your aerobic
fitness.
Training Effect Description
From 1.0 to 1.9 Helps recovery (short activities). Improves endurance
with longer activities (longer than 40 min.).
From 2.0 to 2.9 Maintains your aerobic fitness.
From 3.0 to 3.9 Improves your aerobic fitness if repeated as part of
your weekly training program.
From 4.0 to 4.9 Highly improves your aerobic fitness if repeated one
or two times per week with adequate recovery time.
5.0
Causes temporary overload with high improvement.
Train up to this number with extreme care. Requires
additional recovery days.
Training effect technology is provided and supported by
Firstbeat Technologies Ltd. For more information, go to
www.firstbeattechnologies.com.
Clock
Setting an Alarm
You can set up to ten separate alarms. You can set each alarm
to sound once or to repeat regularly.
1 Hold UP.
2 Select Clock > Alarm Clock > Add Alarm.
3 Select Status > On.
4 Select Time, and enter the alarm time.
Clock
5 Select Notification, and select a type of notification
(optional).
6 Select Frequency, and select when the alarm should repeat.
7 Select Backlight > On to turn on the backlight with the alarm.
Starting the Countdown Timer
Hold UP.
Select Clock > Timer.
Enter the time.
If necessary, select Restart > On to automatically restart the
timer after it expires.
5 If necessary, select Notification, and select a type of
notification.
6 Select Start Timer.
Using the Stopwatch
You can delete a saved location or edit its name, elevation, and
position information.
1 Hold UP.
2 Select Navigation > Saved Locations.
3 Select a saved location.
4 Select an option to edit the location.
Deleting All Saved Locations
You can delete all of your saved locations at once.
1 Hold UP.
2 Select Navigation > Saved Locations > Delete All.
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course. When you start navigating, you can choose the activity
to be used while traveling to your destination, such as hiking,
running, or biking. If you are already recording an activity when
you start navigation, the device continues to record the current
activity while navigating.
1 Hold UP.
2 Select Navigation.
3 Select a category.
4 Respond to the on-screen prompts to choose a destination.
5 Select Go To.
6 Select an activity.
Navigation information appears.
7 Select START to begin navigation.
8 Select UP or DOWN to view additional data pages (optional).
AF
1 Hold UP.
2 Select Clock > Stopwatch.
3 From the clock, select START.
Editing Your Saved Locations
Setting Sunrise and Sunset Alerts
You can set the sunrise and sunset alerts to sound a specific
number of minutes or hours before the actual sunrise or sunset
occurs.
1 Hold UP.
2 Select Clock > Alerts.
3 Select an option:
• Select Til Sunset > Status > On.
• Select Til Sunrise > Status > On.
4 Select Time, and enter the time.
Navigation
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from your current location to a new location.
1 If necessary, add the project waypoint app to the apps list
(Activity App Settings, page 17).
2 Select START > Project Wpt..
3 Select UP or DOWN to set the heading.
4 Select START.
5 Select DOWN to select a unit of measure.
6 Select UP to enter the distance.
7 Select START to save.
The projected waypoint is saved with a default name.
Saving Your Location
You can save your current location to navigate back to it later.
1 Hold UP.
2 Select Save Location.
3 Follow the on-screen instructions.
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1 Hold UP.
2 Select Navigation > Saved Locations.
3 Select a saved location.
4 Select an option to edit the location.
Navigation
Navigating with Sight 'N Go
You can point the device at an object in the distance, such as a
water tower, lock in the direction, and then navigate to the
object.
1 Hold UP.
2 Select Navigation > Sight 'N Go.
3 Point the top of the watch at an object and select START.
4 Select an activity.
Navigation information appears.
5 Select START to begin navigation.
6 Select UP or DOWN to view additional data pages (optional).
Compass
The device has a 3-axis compass with automatic calibration.
The compass features and appearance change depending on
your activity, whether GPS is enabled, and whether you are
navigating to a destination. You can change the compass
settings manually (Compass Settings, page 19). To open the
compass settings quickly, you can select START from the
compass widget.
Map
represents your location on the map. Location names and
symbols appear on the map. When you are navigating to a
destination, your route is marked with a line on the map.
• Map navigation (Panning and Zooming the Map, page 13)
• Map settings (Customizing Map Features, page 20)
Panning and Zooming the Map
1 While navigating, select UP or DOWN to view the map.
2 Hold UP.
13
3 Select Pan/Zoom.
4 Select an option:
Multisport History
• To toggle between panning up and down, panning left and
right, or zooming, select START.
• To pan or zoom the map, select UP and DOWN.
• To quit, select BACK.
Navigating To Your Starting Point
You can navigate back to the starting point of your track or
activity along the path you traveled. This feature is available only
for activities that use GPS.
During an activity, select STOP > TracBack.
Your device stores the overall multisport summary of the activity,
including overall distance, time, calories, and optional accessory
data. Your device also separates the activity data for each sport
segment and transition so you can compare similar training
activities and track how quickly you move through the
transitions. Transition history includes distance, time, average
speed, and calories.
Viewing Your Time in Each Heart Rate Zone
Before you can view heart rate zone data, you must pair your
device with a compatible heart rate monitor, complete an
activity, and save the activity.
Viewing your time in each heart rate zone can help you adjust
your training intensity.
1 Hold UP.
2 Select History > Activities.
3 Select an activity.
4 Select Time in Zone.
AF
Viewing Step Totals
Your current location À and track to follow Á appear on the
map.
Altimeter and Barometer
The device contains an internal altimeter and barometer. The
device collects elevation and pressure data continuously, even
in low-power mode. The altimeter displays your approximate
elevation based on pressure changes. The barometer displays
environmental pressure data based on the fixed elevation where
the altimeter was most recently calibrated (Altimeter Settings,
page 19). To open the altimeter or barometer settings quickly,
select START from the altimeter or barometer widgets.
History
History includes time, distance, calories, average pace or speed,
lap data, and optional ANT+ sensor information.
NOTE: When the device memory is full, your oldest data is
overwritten.
Using History
History contains previous activities you have saved on your
device.
1 Hold UP.
2 Select History > Activities.
3 Select an activity.
4 Select an option:
• To view additional information about the activity, select
Details.
• To select a lap and view additional information about each
lap, select Laps.
• To select an interval and view additional information about
each interval, select Intervals.
• To view the activity on a map, select Map.
• To navigate in reverse the path you traveled for the
activity, select TracBack (Navigating To Your Starting
Point, page 14).
• To delete the selected activity, select Delete.
• To navigate the path you traveled for the activity, select
Go.
14
Before you can view step totals, you must turn on activity
tracking (Turning On Activity Tracking, page 10).
1 Hold UP.
2 Select History > Steps.
3 Select a day to view the accumulated step count, step goal,
distance traveled, and calories burned.
Viewing Data Totals
You can view the accumulated distance and time data saved to
your device.
1 Hold UP.
2 Select History > Totals.
3 If necessary, select an activity.
4 Select an option to view weekly or monthly totals.
Deleting History
1 Hold UP.
2 Select History > Options.
3 Select an option:
• Select Delete All Activities to delete all activities from the
history.
• Select Reset Totals to reset all distance and time totals.
NOTE: This does not delete any saved activities.
4 Confirm your selection.
Using the Odometer
The odometer automatically records the total distance traveled
and elevation gained.
1 Hold UP.
2 Select My Stats > Odometer.
3 Select an option to view the odometer totals.
4 If necessary, select a total, and select Yes to reset the
odometer to zero.
Connected Features
Connected features are available for your fēnix 3 device when
you connect the device to a compatible smartphone using
Bluetooth wireless technology. Some features require you to
install the Garmin Connect Mobile app on the connected
smartphone. Go to www.garmin.com/apps for more information.
®
History
Some features are also available when you connect your device
to a wireless network.
Phone notifications: Displays phone notifications and
messages on your fēnix 3 device.
LiveTrack: Allows friends and family to follow your races and
training activities in real time. You can invite followers using
email or social media, allowing them to view your live data on
a Garmin Connect tracking page.
Activity uploads to Garmin Connect: Automatically sends
your activity to your Garmin Connect account as soon as you
finish recording the activity.
Connect IQ: Allows you to extend your device features with new
watch faces, widgets, apps, and data fields.
Enabling Bluetooth Notifications
Viewing Notifications
1 From the clock, select UP to view the notifications widget.
2 Select START, and select a notification.
3 If necessary, select DOWN to scroll through the contents of
the notification.
Locating a Lost Mobile Device
You can use this feature to help locate a lost mobile device that
is paired using Bluetooth wireless technology and currently
within range.
1 From the clock, select START.
2 Select Find Phone.
The fēnix 3 device begins searching for your paired mobile
device. An audible alert sounds on your mobile device, and
the Bluetooth signal strength displays on the fēnix 3 device
screen. The Bluetooth signal strength increases as you move
closer to your mobile device.
3 Select LAP to stop searching.
Garmin Connect
You can connect with your friends on your Garmin Connect
account. Garmin Connect gives you the tools to track, analyze,
share, and encourage each other. Record the events of your
active lifestyle including runs, walks, rides, swims, hikes,
triathlons, golf games, and more. Garmin Connect is also your
online statistics tracker where you can analyze and share all
your rounds of golf. To sign up for a free account, go to
www.garminconnect.com/start.
Store your activities: After you complete and save an activity
with your device, you can upload that activity to Garmin
Connect and keep it as long as you want.
Analyze your data: You can view more detailed information
about your fitness and outdoor activities, including time,
distance, heart rate, calories burned, cadence, an overhead
map view, and pace and speed charts. You can view more
detailed information about your golf games, including
scorecards, statistics, and course information. You can also
view customizable reports.
NOTE: Some data requires an optional accessory such as a
heart rate monitor.
AF
Before you can enable notifications, you must pair the fēnix 3
device with a compatible mobile device (Pairing Your
Smartphone with Your Device, page 1).
1 Hold UP.
2 Select Settings > Bluetooth > Smart Notifications >
Status > On.
3 Select During Activity.
4 Select a notification preference.
5 Select a sound preference.
6 Select Watch Mode.
7 Select a notification preference.
8 Select a sound preference.
9 Select Timeout.
10 Select the amount of time the alert for a new notification
appears on the screen.
2 Select Settings > Bluetooth > Alerts.
4 Select BACK to return to the previous screen.
The notification remains on your fēnix 3 device until you view
it or clear it on your mobile device.
Managing Notifications
You can use your compatible smartphone to manage
notifications that appear on your fēnix 3 device.
Select an option:
• If you are using an Apple device, use the notification
center settings on your smartphone to select the items to
show on the device.
• If you are using an Android™ device, use the app settings
in the Garmin Connect Mobile app to select the items to
show on the device.
®
Turning Off Bluetooth Technology
1 Hold UP.
2 Select Settings > Bluetooth > Status > Off to turn off
Bluetooth wireless technology on your fēnix 3 device.
Refer to the owner's manual for your mobile device to turn off
Bluetooth wireless technology on your mobile device.
Turning On and Off Bluetooth Connection Alerts
You can set the fēnix 3 device to alert you when your paired
smartphone connects and disconnects using Bluetooth wireless
technology.
NOTE: Bluetooth connection alerts are turned off by default.
1 Hold UP.
Connected Features
Track your progress: You can track your daily steps, join a
friendly competition with your connections, and meet your
goals.
Share your activities: You can connect with friends to follow
each other's activities or post links to your activities on your
favorite social networking sites.
Manage your settings: You can customize your device and
user settings on your Garmin Connect account.
Using Garmin Connect Mobile
You can upload all of your activity data to your Garmin Connect
account for comprehensive analysis. With your Garmin Connect
account, you can view a map of your activity, and share your
activities with friends. You can turn on auto upload in the Garmin
Connect Mobile app.
> Garmin
1 From the Garmin Connect Mobile app, select
Devices.
2 Select your fēnix 3 device, and select Device Settings.
15
3 Select the toggle switch to turn on auto upload.
Manually Uploading Data to Garmin Connect Mobile
1 Hold UP.
2 Select Settings > Bluetooth > Sync.
Using Garmin Connect on Your Computer
If you have not paired your fēnix 3 device with your smartphone,
you can upload all of your activity data to your Garmin Connect
account using your computer.
1 Connect the device to your computer using the USB cable.
2 Go to www.garminconnect.com/start.
3 Follow the on-screen instructions.
Wi‑Fi Connected Features
®
Setting Up Wi‑Fi Connectivity
1 Go to www.garminconnect.com/start, and download the
Garmin Express application.
2 Follow the on-screen instructions to set up Wi‑Fi connectivity
with Garmin Express.
Connect IQ Features
You can add Connect IQ features to your watch from Garmin
and other providers using the Garmin Connect Mobile app. You
can customize your device with watch faces, data fields,
widgets, and apps.
Watch Faces: Allow you to customize the appearance of the
clock.
Data Fields: Allow you to download new data fields that present
sensor, activity, and history data in new ways. You can add
Connect IQ data fields to built-in features and pages.
Widgets: Provide information at a glance, including sensor data
and notifications.
Apps: Add interactive features to your watch, such as new
outdoor and fitness activity types.
Downloading Connect IQ Features
Before you can download Connect IQ features from the Garmin
Connect Mobile app, you must pair your fēnix 3 device with your
smartphone.
1 From the settings in the Garmin Connect Mobile app, select
Connect IQ Store.
2 If necessary, select your device.
3 Select a Connect IQ feature.
4 Follow the on-screen instructions.
Downloading Connect IQ Features Using
Your Computer
1 Connect the device to your computer using a USB cable.
16
Go to garminconnect.com and sign in.
From your devices widget, select Connect IQ Store.
Select a Connect IQ feature, and download it.
Follow the on-screen instructions.
Widgets
Your device comes preloaded with widgets that provide at-aglance information. Some widgets require a Bluetooth
connection to a compatible smartphone.
Some widgets are not visible by default. You can add them to
the widget loop manually.
Notifications: Alerts you to incoming calls, texts, social network
updates, and more, based on your smartphone notification
settings.
Calendar: Displays upcoming meetings from your smartphone
calendar.
Music controls: Provides music player controls for your
smartphone.
Weather: Displays the current temperature and weather
forecast.
My day: Displays a dynamic summary of your activity today. The
metrics include your last recorded sport, intensity minutes,
floors climbed, steps, calories burned, and more.
Activity tracking: Tracks your daily step count, step goal,
distance traveled, calories burned, and sleep statistics.
Intensity minutes: Tracks your time spent participating in
moderate to vigorous activities, your weekly intensity minutes
goal, and progress toward your goal.
Heart rate: Displays your current heart rate in beats per minute
(bpm), lowest resting heart rate for today, and a graph of your
heart rate.
Last sport: Displays a brief summary of your last recorded sport
and your total distance for the week.
ABC: Displays combined altimeter, barometer, and compass
information.
Sensor information: Displays information from an internal
sensor or a connected ANT+ sensor.
Compass: Displays an electronic compass.
VIRB controls: Provides camera controls when you have a
VIRB device paired with your fēnix 3 device.
Last activity: Displays a brief summary of your last recorded
activity, such as your last run, last ride, or last swim.
Calories: Displays your calorie information for the current day.
Golf: Displays golf information for your last round.
AF
The fēnix 3 device has Wi‑Fi connected features. The Garmin
Connect Mobile app is not required for you to use Wi‑Fi
connectivity.
Activity uploads to your Garmin Connect account:
Automatically sends your activity to your Garmin Connect
account as soon as you finish recording the activity.
Workouts and training plans: Allows you to browse for and
select workouts and training plans on the Garmin Connect
site. The next time your device has a Wi‑Fi connection, the
files are wirelessly sent to your device.
Software updates: Your device downloads the latest software
update when a Wi‑Fi connection is available. The next time
you turn on or unlock the device, you can follow the onscreen instructions to install the software update.
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
1 From any screen, hold DOWN.
The clock appears.
2 Select UP or DOWN.
The device cycles through the available widgets.
3 If you are recording an activity, select BACK to return to the
activity data pages.
4 Select START to view additional options and functions for a
widget (optional).
Customizing the Widget Loop
You can show, hide, or move items in the widget loop.
1 Hold UP.
2 Select Settings > Widgets.
3 Select a widget.
Connect IQ Features
4 Select an option:
• Select Status to show or hide the widget from the widget
loop.
• Select Move Up or Move Down to change the location of
the widget in the widget loop.
VIRB Remote
The VIRB remote function allows you to control your VIRB
action camera using your device. Go to www.garmin.com/VIRB
to purchase a VIRB action camera.
Customizing the Data Screens
AF
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information. You must also set the
VIRB widget to be shown in the widget loop (Customizing the
Widget Loop, page 16).
1 Turn on your VIRB camera.
2 On your fēnix 3 device, select UP or DOWN from the watch
face to view the VIRB widget.
3 Wait while the device connects to your VIRB camera.
4 Select an option:
• To record video, select START.
The video counter appears on the fēnix 3 screen.
• To stop recording video, select STOP.
• To take a photo, select DOWN.
Pool Size: Sets the pool length for pool swimming (Going for a
Pool Swim, page 7).
Stroke Detect.: Enables stroke detection for pool swimming.
Power Save: Sets the power-save timeout setting for the activity
(Power Save Timeout Settings, page 19).
Background Color: Sets the background color of each activity
to black or white.
Accent Color: Sets the accent color of each activity to help
identify which activity is active.
Status: Shows or hides the activity in the apps list.
Move Up: Adjusts the position of the activity in the apps list.
Move Down: Adjusts the position of the activity in the apps list.
Remove: Deletes the activity.
NOTE: This deletes the activity from the apps list and all
user-entered activity settings. You can restore all of the
device settings to the factory default values to add a removed
activity back to the list (Restoring All Default Settings,
page 22).
Rename: Sets the activity name.
Customizing Your Device
Activity App Settings
These settings allow you to customize each preloaded activity
app based on your needs. For example, you can customize data
pages and enable alerts and training features. Not all settings
are available for all activity types.
Hold UP, select Settings > Apps, and select an activity.
Data Screens: Enables you to customize data screens for the
activity (Customizing the Data Screens, page 17). You can
also show or hide a map data screen for some activities.
Alerts: Sets the training or navigation alerts for the activity.
Metronome: Plays tones at a steady rhythm to help you
improve your performance by training at a faster, slower, or
more consistent cadence (Using the Metronome, page 6).
Auto Lap: Sets the options for the Auto Lap feature (Auto Lap,
page 18).
Auto Pause: Sets the device to stop recording data when you
stop moving or when you drop below a specified speed
(Enabling Auto Pause , page 18).
Auto Climb: Enables the device to detect elevation changes
automatically using the built-in altimeter.
Auto Run: Enables the device to detect ski runs automatically
using the built-in accelerometer.
3D Speed: Calculates your speed using your elevation change
and your horizontal movement over ground (3D Speed and
Distance, page 18).
3D Distance: Calculates your distance traveled using your
elevation change and your horizontal movement over ground.
Lap Key: Enables you to record a lap or a rest during the
activity.
Auto Scroll: Enables you to move through all of the activity data
screens automatically while the timer is running (Using Auto
Scroll, page 18).
GPS: Sets the mode for the GPS antenna (UltraTrac,
page 19).
®
®
Customizing Your Device
You can show, hide, and change the layout and content of data
screens for each activity.
1 Hold UP.
2 Select Settings > Apps.
3 Select the activity to customize.
4 Select Data Screens.
5 Select a data screen to customize.
6 Select an option:
• Select Status to turn the data screen on or off.
• Select Layout to adjust the number of data fields on the
data screen.
• Select a field to change the data that appears in the field.
Adding a Map to an Activity
You can add the map to the data screens loop for an activity.
1 Hold UP.
2 Select Settings > Apps.
3 Select the activity to customize.
4 Select Data Screens > Map.
5 Select Status to turn the map on or off.
6 Select Orientation.
7 Select an option:
• To show north at the top of the page, select North Up.
• To show your current direction of travel toward the top of
the page, select Track Up.
8 Select User Locations to show or hide saved locations on
the map.
9 Select Auto Zoom to select automatically the optimal zoom
level for the map.
When Off is selected, you must zoom in or out manually.
Alerts
You can set alerts for each activity, which can help you to train
toward specific goals, to increase your awareness of your
environment, and to navigate to your destination. Some alerts
are available only for specific activities. There are three types of
alerts: event alerts, range alerts, and recurring alerts.
Event alert: An event alert notifies you once. The event is a
specific value. For example, you can set the device to alert
you when you reach a specified elevation.
17
Range alert: A range alert notifies you each time the device is
above or below a specified range of values. For example, you
can set the device to alert you when your heart rate is below
60 beats per minute (bpm) and over 210 bpm.
Recurring alert: A recurring alert notifies you each time the
device records a specified value or interval. For example, you
can set the device to alert you every 30 minutes.
Alert Name Alert Type
Description
Cadence
Range
You can set minimum and maximum
cadence values.
Calories
Event,
recurring
You can set the number of calories.
Custom
Recurring
You can select an existing message or
create a custom message and select an
alert type.
Distance
Recurring
You can set a distance interval.
Elevation
Range
You can set minimum and maximum
elevation values.
Pace
Range
Power
Range
Run/Walk
Recurring
Speed
Range
Time
Event,
recurring
You can set minimum and maximum heart
rate values or select zone changes. See
About Heart Rate Zones, page 9 and
Heart Rate Zone Calculations, page 10.
You can set minimum and maximum pace
values.
You can set the high or low power level.
You can set timed walking breaks at
regular intervals.
You can set minimum and maximum
speed values.
You can set a time interval.
Setting an Alert
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Alerts.
5 Select an option:
• Select Add New to add a new alert for the activity.
• Select the alert name to edit an existing alert.
6 If necessary, select the type of alert.
7 Select a zone, enter the minimum and maximum values, or
enter a custom value for the alert.
8 If necessary, turn on the alert.
For event and recurring alerts, a message appears each time
you reach the alert value. For range alerts, a message appears
each time you exceed or drop below the specified range
(minimum and maximum values).
Auto Lap
Marking Laps by Distance
You can use Auto Lap to mark a lap at a specific distance
automatically. This feature is helpful for comparing your
performance over different parts of an activity (for example,
every 1 mile or 5 kilometers).
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Auto Lap.
5 Select an option:
• Select Auto Lap to turn Auto Lap on or off.
18
Enabling Auto Pause
®
You can use the Auto Pause feature to pause the timer
automatically when you stop moving. This feature is helpful if
your activity includes stop lights or other places where you must
stop.
NOTE: History is not recorded while the timer is stopped or
paused.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Auto Pause.
5 Select an option:
• To pause the timer automatically when you stop moving,
select When Stopped.
• To pause the timer automatically when your pace or
speed drops below a specified level, select Custom.
AF
Heart Rate Range
• Select Auto Distance to adjust the distance between
laps.
Each time you complete a lap, a message appears that displays
the time for that lap. The device also beeps or vibrates if audible
tones are turned on (System Settings, page 20).
If necessary, you can customize the data pages to display
additional lap data (Customizing the Data Screens, page 17).
Customizing the Lap Alert Message
You can customize one or two data fields that appear in the lap
alert message.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Auto Lap > Lap Alert.
5 Select a data field to change it.
6 Select Preview (optional).
Enabling Auto Climb
You can use the auto climb feature to detect elevation changes
automatically. You can use it during activities such as climbing,
hiking, running, or biking.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Auto Climb > Status > On.
5 Select Run Screen to identify which data screen appears
while running.
6 Select Climb Screen to identify which data screen appears
while climbing.
7 If necessary, select Invert Colors to reverse the display
colors when changing modes.
8 Select Vertical Speed to set the rate of ascent over time.
9 Select Mode Switch to set how quickly the device changes
modes.
3D Speed and Distance
You can set 3D speed and distance to calculate your speed or
distance using both your elevation change and your horizontal
movement over ground. You can use it during activities such as
skiing, climbing, navigating, hiking, running, or biking.
Using Auto Scroll
You can use the auto scroll feature to cycle through all of the
activity data screens automatically while the timer is running.
Customizing Your Device
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select Auto Scroll.
5 Select a display speed.
UltraTrac
The UltraTrac feature is a GPS setting that records track points
and sensor data less frequently. Enabling the UltraTrac feature
increases battery life but decreases the quality of recorded
activities. You should use the UltraTrac feature for activities that
demand longer battery life and for which frequent sensor data
updates are less important.
Power Save Timeout Settings
Sensors Settings
Compass Settings
Hold UP, and select Settings > Sensors > Compass.
Calibrate: Allows you to manually calibrate the compass sensor
(Calibrating the Compass, page 19).
Display: Sets the directional heading on the compass to letters,
degrees, or milli-radians.
North Ref.: Sets the north reference of the compass (Setting the
North Reference, page 19).
Mode: Sets the compass to use electronic-sensor data only
(On), a combination of GPS and electronic-sensor data when
moving (Auto), or GPS data only (Off).
AF
The timeout settings affect how long your device stays in
training mode, for example, when you are waiting for a race to
start. Hold UP, select Settings > Apps, and select an activity.
Select Power Save to adjust the timeout settings for the activity.
Normal: Sets the device to enter low-power watch mode after 5
minutes of inactivity.
Extended: Sets the device to enter low-power watch mode after
25 minutes of inactivity. The extended mode can result in
shorter battery life between charges.
• To change the style of the hands for the analog watch
face, select Hands.
• To change the style of the numbers for the analog watch
face, select Background.
• To change the data that appears on the watch face, select
Additional Data.
5 Select UP or DOWN to preview the watch face options.
6 Select START to save the selection.
Turning On and Off the Lap Key
You can turn on the Lap Key setting to record a lap or a rest
during an activity using LAP. You can turn off the Lap Key
setting to avoid recording laps due to accidental key presses
during an activity.
1 Hold UP.
2 Select Settings > Apps.
3 Select an activity.
4 Select Lap Key.
The lap key status changes to On or Off based on the current
setting.
Watch Face Settings
You can customize the appearance of the watch face by
selecting the layout, colors, and additional data. You can also
download custom watch faces from the Connect IQ store.
Customizing the Watch Face
Before you can activate a Connect IQ watch face, you must
install a watch face from the Connect IQ store (Connect IQ
Features, page 16).
You can customize the watch face information and appearance,
or activate an installed Connect IQ watch face.
1 Hold UP.
2 Select Settings > Watch Face > Type.
3 Select an option:
• To activate the pre-loaded digital watch face, select
Digital.
• To activate the pre-loaded analog watch face, select
Analog.
• To activate an installed Connect IQ watch face, select the
name of the installed watch face.
If
using
a pre-loaded watch face, select an option:
• To change the background color, select Background
Color.
• To add or change an accent color for the digital watch
face, select Accent Color.
• To change the style of the digits for the digital watch face,
select Layout.
Customizing Your Device
Calibrating the Compass
NOTICE
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near objects that influence magnetic
fields, such as vehicles, buildings, and overhead power lines.
Your device was already calibrated at the factory, and the
device uses automatic calibration by default. If you experience
irregular compass behavior, for example, after moving long
distances or after extreme temperature changes, you can
manually calibrate the compass.
1 Hold UP.
2 Select Settings > Sensors > Compass > Calibrate > Start.
3 Follow the on-screen instructions.
Setting the North Reference
You can set the directional reference used in calculating
heading information.
1 Hold UP.
2 Select Settings > Sensors > Compass > North Ref..
3 Select an option:
• To set geographic north as the heading reference, select
True.
• To set the magnetic declination for your location
automatically, select Magnetic.
• To set grid north (000º) as the heading reference, select
Grid.
• To set the magnetic variation value manually, select User,
enter the magnetic variance, and select Done.
Altimeter Settings
Hold UP, and select Settings > Sensors > Altimeter.
Auto Cal.: Allows the altimeter to self-calibrate each time you
turn on GPS tracking.
Calibrate: Allows you to manually calibrate the altimeter sensor.
Calibrating the Barometric Altimeter
Your device was already calibrated at the factory, and the
device uses automatic calibration at your GPS starting point by
default. You can manually calibrate the barometric altimeter if
you know the correct elevation or the correct sea level pressure.
1 Hold UP.
2 Select Settings > Sensors > Altimeter.
19
3 Select an option:
About: Displays device, software, and license information.
• To calibrate automatically from your GPS starting point,
select Auto Cal. > On.
• To enter a known altitude, select Calibrate.
Barometer Settings
Hold UP, and select Settings > Sensors > Barometer.
Plot: Sets the time scale for the chart in the barometer widget.
Storm Alert: Sets the rate of barometric pressure change that
triggers a storm alert.
Navigation Settings
You can customize the map features and appearance when
navigating to a destination.
Customizing Map Features
1 Hold UP.
2 Select Settings > Navigation > Data Screens.
3 Select an option:
Setting Up a Heading Bug
You can set up a heading indicator to display on your data
pages while navigating. The indicator points to your target
heading.
1 Hold UP.
2 Select Settings > Navigation > Heading Bug.
System Settings
Hold UP, and select Settings > System.
User Profile: Allows you to open and customize your personal
statistics (Setting Up Your User Profile, page 9).
Hot Keys: Allows you to assign shortcuts to device keys.
Language: Sets the language displayed on the device.
Time: Adjusts the time settings (Time Settings, page 20).
Backlight: Adjusts the backlight settings (Backlight Settings,
page 20).
Sounds: Sets the device sounds, such as key tones, alerts, and
vibrations.
Units: Sets the units of measure used on the device (Changing
the Units of Measure, page 20).
GLONASS: Using GLONASS provides increased performance
in challenging environments and faster position acquisition.
Using the GPS and GLONASS options can reduce battery
life more than using the GPS option only.
Pos. Format: Sets the geographical position format and datum
options.
Format: Sets general format preferences, such as the pace and
speed shown during activities, and the start of the week.
Data Recording: Sets how the device records activity data. The
Smart recording option (default) allows for longer activity
recordings. The Every Second recording option provides
more detailed activity recordings, but may not record entire
activities that last for longer periods of time.
USB Mode: Sets the device to use mass storage mode or
Garmin mode when connected to a computer.
Restore Defaults: Allows you to reset user data and settings
(Restoring All Default Settings, page 22).
Software Update: Allows you to install software updates
downloaded using Garmin Express.
20
Hold UP, and select Settings > System > Time.
Time Format: Sets the device to show time in a 12-hour or 24hour format.
Set Time: Sets the time zone for the device. The Auto option
sets the time zone automatically based on your GPS position.
Time: Allows you to adjust the time if it is set to the Manual
option.
Backlight Settings
Hold UP, and select Settings > System > Backlight.
Mode: Sets the backlight to turn on manually or automatically.
The Auto option allows you to separately set the backlight for
keys, alerts, and gestures.
NOTE: When you set Gesture to On, you trigger the backlight
by raising and turning your arm to look at your wrist.
Timeout: Sets the length of time before the backlight turns off.
Brightness: Sets the brightness level of the backlight.
Changing the Units of Measure
AF
• Select Map to turn on or off the map.
• Select Guide to turn on or off the guide screen that
displays the compass bearing or course to follow while
navigating.
• Select a screen to add, remove, or customize.
Time Settings
You can customize units of measure for distance, pace and
speed, elevation, weight, height, and temperature.
1 Hold UP.
2 Select Settings > System > Units.
3 Select a measurement type.
4 Select a unit of measure.
ANT+ Sensors
The device is compatible with these optional, wireless ANT+
accessories.
• Heart rate monitor, such as HRM-Run (Putting On the Heart
Rate Monitor, page 2)
• Bike speed and cadence sensor (Using an Optional Bike
Speed or Cadence Sensor, page 21)
• Foot pod (Foot Pod, page 21)
• Power sensor, such as Vector™
• tempe™ wireless temperature sensor (tempe, page 21)
For information about compatibility and purchasing additional
sensors, go to http://buy.garmin.com.
Pairing ANT+ Sensors
The first time you connect a sensor to your device using ANT+
wireless technology, you must pair the device and sensor. After
they are paired, the device connects to the sensor automatically
when you start an activity and the sensor is active and within
range.
NOTE: If a heart rate monitor was bundled with your device, the
included heart rate monitor is already paired with your device.
1 If you are pairing a heart rate monitor, put on the heart rate
monitor (Putting On the Heart Rate Monitor, page 2).
The heart rate monitor does not send or receive data until
you put it on.
2 Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other ANT+ sensors
while pairing.
3 Hold UP.
4 Select Settings > Sensors > Add New.
5 Select an option:
• Select Search All.
• Select your sensor type.
ANT+ Sensors
After the sensor is paired with your device, the sensor status
changes from Searching to Connected. Sensor data appears
in the data page loop or a custom data field.
Using an Optional Bike Speed or Cadence
Sensor
You can use a compatible bike speed or cadence sensor to
send data to your device.
• Pair the sensor with your device (Pairing ANT+ Sensors,
page 20).
• Update your fitness user profile information (Setting Up Your
User Profile, page 9).
• Set your wheel size (Wheel Size and Circumference,
page 26).
• Go for a ride (Going for a Ride, page 7).
3 Select your foot pod.
4 Select Speed.
5 Select an option:
• Select Indoor when you are training with GPS turned off,
usually indoors.
• Select Always to use your foot pod data regardless of the
GPS setting.
tempe
The tempe is an ANT+ wireless temperature sensor. You can
attach the sensor to a secure strap or loop where it is exposed
to ambient air, and therefore, provides a consistent source of
accurate temperature data. You must pair the tempe with your
device to display temperature data from the tempe.
Device Information
Foot Pod
Viewing Device Information
You can view the unit ID, software version, regulatory
information, and license agreement.
1 Hold UP.
2 Select Settings > System > About.
AF
Your device is compatible with the foot pod. You can use the
foot pod to record pace and distance instead of using GPS when
you are training indoors or when your GPS signal is weak. The
foot pod is on standby and ready to send data (like the heart
rate monitor).
After 30 minutes of inactivity, the foot pod powers off to
conserve the battery. When the battery is low, a message
appears on your device. Approximately five hours of battery life
remain.
Improving Foot Pod Calibration
Before you can calibrate your device, you must acquire GPS
signals and pair your device with the foot pod (Pairing ANT+
Sensors, page 20).
The foot pod is self-calibrating, but you can improve the
accuracy of the speed and distance data with a few outdoor runs
using GPS.
1 Stand outside for 5 minutes with a clear view of the sky.
2 Start a running activity.
3 Run on a track without stopping for 10 minutes.
4 Stop your activity, and save it.
Based on the recorded data, the foot pod calibration value
changes, if necessary. You should not need to calibrate the
foot pod again unless your running style changes.
Calibrating Your Foot Pod Manually
Before you can calibrate your device, you must pair your device
with the foot pod sensor (Pairing ANT+ Sensors, page 20).
Manual calibration is recommended if you know your calibration
factor. If you have calibrated a foot pod with another Garmin
product, you may know your calibration factor.
1 Hold UP.
2 Select Settings > Sensors.
3 Select your foot pod.
4 Select Cal. Factor > Set Value.
5 Adjust the calibration factor:
• Increase the calibration factor if your distance is too low.
• Decrease the calibration factor if your distance is too high.
Setting Foot Pod Speed and Distance
Before you can customize the foot pod speed and distance, you
must pair your device with the foot pod sensor (Pairing ANT+
Sensors, page 20).
You can set your device to calculate pace and distance from
your foot pod data instead of GPS data.
1 Hold UP.
2 Select Settings > Sensors.
Device Information
Specifications
Battery type
Rechargeable, built-in lithium-ion battery
Battery life
Up to 6 wk.
Water rating
10 ATM*
Operating temperature
range
From -20º to 55ºC (from -4º to 131ºF)
Charging temperature
range
From 0º to 45ºC (from 32º to 113ºF)
Radio frequency
2.4 GHz
Radio protocols
ANT+ wireless technology, Wi‑Fi, Bluetooth
Smart device
*The device withstands pressure equivalent to a depth of 100 m.
For more information, go to www.garmin.com/waterrating.
Battery Information
The actual battery life depends on the features enabled on your
device, such as activity tracking, smartphone notifications, GPS,
internal sensors, and connected ANT+ sensors.
Battery Life
Mode
Up to 20 hr.
Normal GPS mode
Up to 50 hr.
UltraTrac GPS mode with two-minute polling interval
Up to 6 wk.
Watch mode
HRM-Run Specifications
Battery type
User-replaceable CR2032, 3 V
Battery life
1 yr. (approximately 1 hr./day)
Operating temperature
range
From -10° to 50°C (from 14° to 122°F)
Radio frequency/protocol
2.4 GHz ANT+ wireless communications
protocol
Water rating
5 ATM*
*The device withstands pressure equivalent to a depth of 50 m.
For more information, go to www.garmin.com/waterrating.
Data Management
NOTE: The device is not compatible with Windows 95, 98, Me,
Windows NT , and Mac OS 10.3 and earlier.
®
®
®
21
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2 Disconnect the cable from your computer.
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
Open the Garmin drive or volume.
If necessary, open a folder or volume.
Select a file.
Press the Delete key on your keyboard.
Troubleshooting
Getting More Information
You can find more information about this product on the Garmin
website.
• Go to www.garmin.com/outdoor.
• Go to http://buy.garmin.com, or contact your Garmin dealer
for information about optional accessories and replacement
parts.
Device Maintenance
Device Care
AF
For example, use a watch face without a second hand
(Customizing the Watch Face, page 19).
• Limit the smartphone notifications the device displays
(Managing Notifications, page 15).
• Stop broadcasting heart rate data to paired Garmin devices
(Broadcasting Heart Rate Data to Garmin Devices, page 2).
• Turn off wrist-based heart rate monitoring.
NOTE: Wrist-based heart rate monitoring is used to calculate
vigorous intensity minutes and calories burned.
My daily step count does not appear
The daily step count is reset every night at midnight.
If dashes appear instead of your step count, allow the device
to acquire satellite signals and set the time automatically.
The temperature reading is not accurate
Your body temperature affects the temperature reading for the
internal temperature sensor. To get the most accurate
temperature reading, you should remove the watch from your
wrist and wait 20 to 30 minutes.
You can also use an optional tempe external temperature
sensor to view accurate ambient temperature readings while
wearing the watch.
Resetting Your Device
NOTICE
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Avoid pressing the keys under water.
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
If the device stops responding, you may need to reset it.
1 Hold LIGHT for at least 25 seconds.
2 Hold LIGHT for one second to turn on the device.
NOTICE
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
Restoring All Default Settings
1 Wipe the device using a cloth dampened with a mild
NOTE: This deletes all user-entered information and activity
history.
You can restore all of the device settings to the factory default
values.
1 Hold UP.
2 Select Settings > System > Restore Defaults > Yes.
Maximizing the Battery Life
You can do several things to extend the life of the battery.
• Reduce the backlight timeout (Backlight Settings, page 20).
• Reduce the backlight brightness.
• Use UltraTrac GPS mode for your activity (UltraTrac,
page 19).
• Turn off Bluetooth wireless technology when you are not
using connected features (Connected Features, page 14).
• When pausing your activity for a longer period of time, use
the resume later option (Stopping an Activity, page 6).
• Turn off activity tracking (Activity Tracking, page 10).
• Use a Connect IQ watch face that is not updated every
second.
22
detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
Metal Watch Band Adjustment
If your watch includes a metal watch band, you should take your
watch to a jeweler or other professional to adjust the length of
the metal band.
Heart Rate Monitor Care Instructions
Caring for the Heart Rate Monitor
NOTICE
A buildup of sweat and salt on the strap can decrease the ability
of the heart rate monitor to report accurate data.
• Rinse the heart rate monitor after every use.
• Hand wash the heart rate monitor after every seven uses,
using a tiny amount of mild detergent, such as dishwashing
liquid.
Device Maintenance
NOTE: Using too much detergent may damage the heart rate
monitor.
• Do not put the heart rate monitor in a washing machine or
dryer.
• When drying the heart rate monitor, hang it up or lay it flat.
User Replaceable Batteries
WARNING
Do not use a sharp object to remove batteries.
Keep the battery away from children.
Never put batteries in mouth. If swallowed, contact your
physician or local poison control center.
Replaceable coin cell batteries may contain perchlorate
material. Special handling may apply. See www.dtsc.ca.gov
/hazardouswaste/perchlorate.
CAUTION
Contact your local waste disposal department to properly
recycle the batteries.
AF
Replacing the Heart Rate Monitor Battery
1 Remove the sleeve À from the heart rate monitor module.
2 Use a small Phillips (00) screwdriver to remove the four
24-Hour Max.: The maximum temperature recorded in the last
24 hours.
24-Hour Min.: The minimum temperature recorded in the last
24 hours.
30s Avg. Power: The 30-second moving average of power
output.
30s Avg Balance: The 30-second moving average of the left/
right power balance.
3s Avg. Balance: The three-second moving average of the left/
right power balance.
3s Avg. Power: The 3-second moving average of power output.
500m Pace: The current swimming pace per 500 meters.
Ambient Press.: The uncalibrated ambient pressure.
Average HR: The average heart rate for the current activity.
Average Pace: The average pace for the current activity.
Average Power: The average power output for the current
activity.
Average SWOLF: The average swolf score for the current
activity. Your swolf score is the sum of the time for one length
plus the number of strokes for that length (Swim
Terminology, page 7). In open water swimming, 25 meters is
used to calculate your swolf score.
Avg. %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
activity.
Avg. Ascent: The average vertical distance of ascent since the
last reset.
Avg. Balance: The average left/right power balance for the
current activity.
Avg. Cadence: Cycling. The average cadence for the current
activity.
Avg. Cadence: Running. The average cadence for the current
activity.
Avg. Descent: The average vertical distance of descent since
the last reset.
Avg. GCT Bal.: The average ground contact time balance for
the current session.
Avg. Lap Time: The average lap time for the current activity.
Avg. Speed: The average speed for the current activity.
Avg. Stride Len.: The average stride length for the current
session.
Avg. Strk/Len: The average number of strokes per length
during the current activity.
Avg. Strk Rate: The average number of strokes per minute
(spm) during the current activity.
Avg. Vert. Osc.: The average amount of vertical oscillation for
the current activity.
Avg. Vert. Ratio: The average ratio of vertical oscillation to
stride length for the current session.
Avg 500m Pace: The average swimming pace per 500 meters
for the current activity.
Avg Dist Per Stk: The average distance traveled per stroke
during the current activity.
Avg GCT: The average amount of ground contact time for the
current activity.
Avg HR %Max.: The average percentage of maximum heart
rate for the current activity.
Balance: The current left/right power balance.
Baro. Pressure: The calibrated current pressure.
Bearing: The direction from your current location to a
destination. You must be navigating for this data to appear.
screws on the front of the module.
3 Remove the cover and battery.
4 Wait 30 seconds.
5 Insert the new battery under the two plastic tabs Á with the
positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.
The O-ring gasket should remain around the outside of the
raised plastic ring.
6 Replace the front cover and the four screws.
Observe the orientation of the front cover. The raised screw
 should fit in the matching raised screw hole on the front
cover.
NOTE: Do not overtighten.
7 Replace the sleeve.
After you replace the heart rate monitor battery, you may need
to pair it with the device again.
Appendix
Data Fields
%FTP: The current power output as a percentage of functional
threshold power.
%HRR: The percentage of heart rate reserve (maximum heart
rate minus resting heart rate).
10s Avg. Power: The 10-second moving average of power
output.
10s Avg Balance: The 10-second moving average of the left/
right power balance.
Appendix
23
Int. Max. %HRR: The maximum percentage of heart rate
reserve (maximum heart rate minus resting heart rate) for the
current swim interval.
Int. Max. %Max.: The maximum percentage of maximum heart
rate for the current swim interval.
Int. Max. HR: The maximum heart rate for the current swim
interval.
Int. Pace: The average pace for the current interval.
Int. SWOLF: The average swolf score for the current interval.
Int Dist Per Stk: The average distance traveled per stroke
during the current interval.
Intensity Factor: The Intensity Factor™ for the current activity.
Interval Lengths: The number of pool lengths completed during
the current interval.
Interval Time: The stopwatch time for the current interval.
Int Strk/Len: The average number of strokes per length during
the current interval.
Int Strk Rate: The average number of strokes per minute (spm)
during the current interval.
Int Strk Type: The current stroke type for the interval.
Int Strokes: The total number of strokes for the current interval.
L. Int. Stk. Rate: The average number of strokes per minute
(spm) during the last completed interval.
L. Int. Stk. Type: The stroke type used during the last
completed interval.
L. Int. Strokes: The total number of strokes for the last
completed interval.
L. Int. SWOLF: The average swolf score for the last completed
interval.
L. Len. Stk. Rate: The average number strokes per minute
(spm) during the last completed pool length.
L. Len. Stk. Type: The stroke type used during the last
completed pool length.
L. Len. Strokes: The total number of strokes for the last
completed pool length.
Lap %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
lap.
Lap 500m Pace: The average swimming pace per 500 meters
for the current lap.
Lap Ascent: The vertical distance of ascent for the current lap.
Lap Balance: The average left/right power balance for the
current lap.
Lap Cadence: Cycling. The average cadence for the current
lap.
Lap Cadence: Running. The average cadence for the current
lap.
Lap Descent: The vertical distance of descent for the current
lap.
Lap Distance: The distance traveled for the current lap.
Lap GCT: The average amount of ground contact time for the
current lap.
Lap GCT Bal.: The average ground contact time balance for the
current lap.
Lap HR: The average heart rate for the current lap.
Lap HR %Max.: The average percentage of maximum heart
rate for the current lap.
Lap NP: The average Normalized Power for the current lap.
Lap Pace: The average pace for the current lap.
Lap Power: The average power output for the current lap.
Laps: The number of laps completed for the current activity.
AF
Cadence: Cycling. The number of revolutions of the crank arm.
Your device must be connected to a cadence accessory for
this data to appear.
Cadence: Running. The steps per minute (right and left).
Calories: The amount of total calories burned.
Compass Hdg.: The direction you are moving based on the
compass.
Course: The direction from your starting location to a
destination. Course can be viewed as a planned or set route.
You must be navigating for this data to appear.
Dest. Location: The position of your final destination.
Dest. Name: The last point on the route to the destination. You
must be navigating for this data to appear.
Dist. Per Stroke: The distance traveled per stroke.
Dist. Remaining: The remaining distance to the final
destination. You must be navigating for this data to appear.
Distance: The distance traveled for the current track or activity.
Distance to Next: The remaining distance to the next waypoint
on the route. You must be navigating for this data to appear.
Elapsed Time: The total time recorded. For example, if you start
the timer and run for 10 minutes, then stop the timer for 5
minutes, then start the timer and run for 20 minutes, your
elapsed time is 35 minutes.
Elevation: The altitude of your current location above or below
sea level.
ETA: The estimated time of day when you will reach the final
destination (adjusted to the local time of the destination). You
must be navigating for this data to appear.
ETA at Next: The estimated time of day when you will reach the
next waypoint on the route (adjusted to the local time of the
waypoint). You must be navigating for this data to appear.
ETE: The estimated time remaining until you reach the final
destination. You must be navigating for this data to appear.
GCT: The amount of time in each step that you spend on the
ground while running, measured in milliseconds. Ground
contact time is not calculated while walking.
GCT Balance: The left/right balance of ground contact time
while running.
Glide Ratio: The ratio of horizontal distance traveled to the
change in vertical distance.
Glide Ratio Dest.: The glide ratio required to descend from your
current position to the destination elevation. You must be
navigating for this data to appear.
GPS Elevation: The altitude of your current location using GPS.
GPS Heading: The direction you are moving based on GPS.
Grade: The calculation of rise (elevation) over run (distance).
For example, if for every 3 m (10 ft.) you climb you travel
60 m (200 ft.), the grade is 5%.
Heading: The direction you are moving.
Heart Rate: Your heart rate in beats per minute (bpm). Your
device must be connected to a compatible heart rate monitor.
HR %Max.: The percentage of maximum heart rate.
HR Zone: The current range of your heart rate (1 to 5). The
default zones are based on your user profile and maximum
heart rate (220 minus your age).
Int. Avg. %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
swim interval.
Int. Avg. %Max.: The average percentage of maximum heart
rate for the current swim interval.
Int. Avg. HR: The average heart rate for the current swim
interval.
Int. Distance: The distance traveled for the current interval.
24
Appendix
NP: The Normalized Power™ for the current activity.
Off Course: The distance to the left or right by which you have
strayed from the original path of travel. You must be
navigating for this data to appear.
Pace: The current pace.
Pedal Smooth.: The measurement of how evenly a rider is
applying force to the pedals throughout each pedal stroke.
Perform. Cond.: The performance condition score is a real-time
assessment of your ability to perform.
Power: The current power output in watts.
Power to Weight: The current power measured in watts per
kilogram.
Power Zone: The current range of power output (1 to 7) based
on your FTP or custom settings.
Repeat On: The timer for the last interval plus the current rest
(pool swimming).
Rest Timer: The timer for the current rest (pool swimming).
Speed: The current rate of travel.
Steps: The number of steps recorded by the foot pod.
Stride Length: The length of your stride from one footfall to the
next, measured in meters.
Stroke Rate: The number of strokes per minute (spm).
Strokes: The total number of strokes for the current activity.
Sunrise: The time of sunrise based on your GPS position.
Sunset: The time of sunset based on your GPS position.
Temperature: The temperature of the air. Your body
temperature affects the temperature sensor.
Time in Zone: The time elapsed in each heart rate or power
zone.
Time of Day: The time of day based on your current location
and time settings (format, time zone, daylight saving time).
Timer: The current time of the countdown timer.
Time to Next: The estimated time remaining before you reach
the next waypoint in the route. You must be navigating for
this data to appear.
Torque Eff.: The measurement of how efficiently a rider is
pedaling.
Total Ascent: The total elevation distance ascended since the
last reset.
Total Descent: The total elevation distance descended since
the last reset.
Training Effect: The current impact (1.0 to 5.0) on your aerobic
fitness.
TSS: The Training Stress Score™ for the current activity.
V Dist to Dest: The elevation distance between your current
position and the final destination. You must be navigating for
this data to appear.
Vertical Osc.: The amount of bounce while you are running.
The vertical motion of your torso, measured in centimeters for
each step.
Vertical Ratio: The ratio of vertical oscillation to stride length.
Vertical Speed: The rate of ascent or descent over time.
Vert Spd to Tgt: The rate of ascent or descent to a
predetermined altitude. You must be navigating for this data
to appear.
VMG: The speed at which you are closing on a destination along
a route. You must be navigating for this data to appear.
Work: The accumulated work performed (power output) in
kilojoules.
AF
Lap Speed: The average speed for the current lap.
Lap Stride Len.: The average stride length for the current lap.
Lap Time: The stopwatch time for the current lap.
Lap Vert. Osc.: The average amount of vertical oscillation for
the current lap.
Lap Vert. Ratio: The average ratio of vertical oscillation to stride
length for the current lap.
Last Int. Dist.: The distance traveled for the last completed
interval.
Last Int. Pace: The average pace for the last completed
interval.
Last Int. Time: The stopwatch time for the last completed
interval.
Last Lap Ascent: The vertical distance of ascent for the last
completed lap.
Last Lap Cad.: Cycling. The average cadence for the last
completed lap.
Last Lap Cad.: Running. The average cadence for the last
completed lap.
Last Lap Descent: The vertical distance of descent for the last
completed lap.
Last Lap Dist.: The distance traveled for the last completed lap.
Last Lap HR: The average heart rate for the last completed lap.
Last Lap NP: The average Normalized Power for the last
completed lap.
Last Lap Pace: The average pace for the last completed lap.
Last Lap Power: The average power output for the last
completed lap.
Last Lap Speed: The average speed for the last completed lap.
Last Lap Time: The stopwatch time for the last completed lap.
Last Len. Pace: The average pace for your last completed pool
length.
Last Len. SWOLF: The swolf score for the last completed pool
length.
Lat/Lon: The current position in latitude and longitude
regardless of the selected position format setting.
Lengths: The number of pool lengths completed during the
current activity.
L Int Dist P Stk: The average distance traveled per stroke
during the last completed interval.
L Lap 500m Pace: The average swimming pace per 500 meters
for the last lap.
Location: The current position using the selected position
format setting.
Max. Ascent: The maximum rate of ascent in feet per minute or
meters per minute since the last reset.
Max. Descent: The maximum rate of descent in meters per
minute or feet per minute since the last reset.
Max. Elevation: The highest elevation reached since the last
reset.
Max. Lap Power: The top power output for the current lap.
Maximum Speed: The top speed for the current activity.
Max Power: The top power output for the current activity.
Min. Elevation: The lowest elevation reached since the last
reset.
Nautical Dist: The distance traveled in nautical meters or
nautical feet.
Nautical Speed: The current speed in knots.
Next Waypoint: The next point on the route. You must be
navigating for this data to appear.
Appendix
25
VO2 Max. Standard Ratings
These tables include standardized classifications for VO2 max. estimates by age and gender.
Males
Percentile
20–29
30–39
40–49
50–59
60–69
70–79
Superior
95
55.4
54
52.5
48.9
45.7
42.1
Excellent
80
51.1
48.3
46.4
43.4
39.5
36.7
Good
60
45.4
44
42.4
39.2
35.5
32.3
Fair
40
41.7
40.5
38.5
35.6
32.3
29.4
Poor
0–40
<41.7
<40.5
<38.5
<35.6
<32.3
<29.4
Females
Percentile
20–29
30–39
40–49
50–59
60–69
70–79
Superior
95
49.6
47.4
45.3
41.1
37.8
36.7
Excellent
80
43.9
42.4
39.7
36.7
33
30.9
Good
60
39.5
37.8
36.3
33
30
28.1
Fair
40
36.1
34.4
33
30.1
27.5
25.9
Poor
0–40
<36.1
<34.4
<33
<30.1
<27.5
<25.9
Data reprinted with permission from The Cooper Institute. For more information, go to www.CooperInstitute.org.
Wheel Size
L (mm)
The wheel size is marked on both sides of the tire. This is not a
comprehensive list. You can also use one of the calculators
available on the Internet.
27 × 1-1/4
2161
27 × 1-3/8
2169
650 × 35A
2090
Wheel Size
L (mm)
650 × 38A
2125
935
650 × 38B
2105
1020
700 × 18C
2070
1055
700 × 19C
2080
1185
700 × 20C
2086
1195
700 × 23C
2096
1340
700 × 25C
2105
1350
700 × 28C
2136
1515
700 × 30C
2170
1615
700 × 32C
2155
1770
700C Tubular
2130
1785
700 × 35C
2168
1753
700 × 38C
2180
1785
700 × 40C
2200
12 × 1.75
14 × 1.5
14 × 1.75
16 × 1.5
16 × 1.75
18 × 1.5
18 × 1.75
20 × 1.75
20 × 1-3/8
22 × 1-3/8
22 × 1-1/2
24 × 1
24 × 3/4 Tubular
24 × 1-1/8
24 × 1-1/4
24 × 1.75
24 × 2.00
24 × 2.125
AF
Wheel Size and Circumference
1795
1905
Software License Agreement
1890
BY USING THE DEVICE, YOU AGREE TO BE BOUND BY THE
TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE
LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT
CAREFULLY.
Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited
license to use the software embedded in this device (the
“Software”) in binary executable form in the normal operation of
the product. Title, ownership rights, and intellectual property
rights in and to the Software remain in Garmin and/or its thirdparty providers.
You acknowledge that the Software is the property of Garmin
and/or its third-party providers and is protected under the United
States of America copyright laws and international copyright
treaties. You further acknowledge that the structure,
organization, and code of the Software, for which source code is
not provided, are valuable trade secrets of Garmin and/or its
third-party providers and that the Software in source code form
remains a valuable trade secret of Garmin and/or its third-party
providers. You agree not to decompile, disassemble, modify,
reverse assemble, reverse engineer, or reduce to human
readable form the Software or any part thereof or create any
derivative works based on the Software. You agree not to export
or re-export the Software to any country in violation of the export
control laws of the United States of America or the export control
laws of any other applicable country.
1925
1965
26 × 7/8
1920
26 × 1(59)
1913
26 × 1(65)
1952
26 × 1.25
1953
26 × 1-1/8
1970
26 × 1-3/8
2068
26 × 1-1/2
2100
26 × 1.40
2005
26 × 1.50
2010
26 × 1.75
2023
26 × 1.95
2050
26 × 2.00
2055
26 × 2.10
2068
26 × 2.125
2070
26 × 2.35
2083
26 × 3.00
2170
27 × 1
2145
27 × 1-1/8
2155
26
Appendix
BSD 3-Clause License
AF
Copyright © 2003-2010, Mark Borgerding
All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
• Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
• Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
• Neither the author nor the names of any contributors may be
used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
Symbol Definitions
These symbols may appear on the device or accessory labels.
Alternating current. The device is suitable for alternating current.
Direct current. The device is suitable for direct current only.
Fuse. Indicates a fuse specification or location.
WEEE disposal and recycling symbol. The WEEE symbol is
attached to the product in compliance with the EU directive
2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE). It is intended to deter the improper disposal of this
product and to promote reuse and recycling.
Appendix
27
Index
accessories 22
activities 5, 17
custom 8
saving 6, 8
starting 5, 8
activity tracking 10, 11
alarms 12, 17
alerts 13, 17, 18
altimeter 14, 19
calibrating 19
ANT+ sensors 20
applications 14, 16
smartphone 1
auto climb 18
Auto Lap 18
Auto Pause 18
auto scroll 18
data
pages 17
storing 15, 16
transferring 15, 16
uploading 15, 16
data fields 6, 16
deleting
all user data 22
history 14
personal records 12
distance 18
alerts 18
dogleg 9
drills 7
fitness 12
foot pod 20, 21
Garmin Connect 1, 11, 14–16
storing data 16
28
saving activities 6–8
scorecard 9
screen 20
settings 16, 17, 19, 20, 22
Sight 'N Go 13
skiing 6
alpine 6
snowboarding 6
sleep mode 10
smartphone 16
applications 14, 16
pairing 1
snowboarding 6
software
license 21
updating 1
version 21
software license agreement 26
specifications 21
speed 18
speed and cadence sensors 21
stand up paddle boarding (SUP) 8
stopwatch 13
storing data 15
stress score 5
stride length 3
strokes 7
sunrise and sunset times 13
swimming 7
swolf score 7
system settings 20
keys 1, 20
customizing 19
locking 1
AF
cadence 3, 6
alerts 18
sensors 21
calendar 11
calibrating
altimeter 19
compass 19
calorie, alerts 18
charging 1
cleaning the device 22
clock 12, 13
compass 13, 19, 20
calibrating 19
Connect IQ 16
connecting 15
coordinates 13
countdown timer 13
courses
playing 8
selecting 8
customizing the device 17
cycling 7
heading setting 20
heart rate 1, 2
alerts 18
monitor 2, 4, 5, 20, 22, 23
pairing sensors 2
zones 9, 10, 14
hiking 6
history 7, 8, 14
deleting 14
sending to computer 15, 16
intervals 7
workouts 11
backlight 1, 20
bands 22
barometer 14, 19, 20
battery 22
charging 1
life 21
maximizing 15, 19, 22
replacing 23
bike sensors 21
Bluetooth technology 14, 15
recovery 5
registering the device 1
replacing the battery 23
resetting the device 22
routes 13
rowing 8
running dynamics 3, 4
Garmin Express 1, 16
registering the device 1
updating software 1
GLONASS 20
goals 12
GPS 19, 20
ground contact time 3
lactate threshold 5
language 20
layup 9
lengths 7
lifetime athlete 10
locations 13
deleting 13
editing 13
saving 13
locking, keys 1
main menu, customizing 16
maps 17, 20
browsing 13
navigating 13, 14
updating 1
measuring a shot 9
menu 1
metronome 6
multisport 8, 14
odometer 9, 14
open-water swimming 7
target 12
tempe 21, 22
temperature 21, 22
time
alerts 18
settings 20
zones and formats 20
timer 6–8, 14
countdown 13
tones 6, 13
TracBack 6, 14
tracks 6, 13
training 11, 12, 14
pages 6
plans 11
Training Effect 12
triathlon training 8
troubleshooting 2, 4, 22
navigation 17, 20
Sight 'N Go 13
north reference 19
notifications 15
paddle boarding 8
pairing
ANT+ sensors 2, 20
smartphone 1
performance condition 5
personal records 12
deleting 12
pool size 7
power (force)
alerts 18
meters 4
zones 10
product registration 1
profiles 5
user 9
projected finish time 4
racing 12
UltraTrac 19
unit ID 21
units of measure 20
uploading data 15, 16
USB, disconnecting 22
user data, deleting 22
user profile 9
vertical oscillation 3
vertical ratio 3
VIRB remote 17
Virtual Partner 11, 12
VO2 max. 4, 26
watch faces 16, 19
watch mode 19
water resistance 22
Index
waypoints, projecting 13
wheel sizes 26
Wi‑Fi, connecting 16
widgets 2, 16
workouts 11
loading 11
AF
zones
heart rate 9, 10
power 10
zooming 1
Index
29
www.garmin.com/support
+43 (0) 820 220230
+ 32 2 672 52 54
0800 770 4960
1-866-429-9296
+385 1 5508 272
+385 1 5508 271
+420 221 985466
+420 221 985465
+ 45 4810 5050
+ 358 9 6937 9758
+ 331 55 69 33 99
+ 39 02 36 699699
0800 427 652
+47 815 69 555
+35 1214 447 460
AF
1800 235 822
(+52) 001-855-792-7671
0800 0233937
00800 4412 454
+44 2380 662 915
+386 4 27 92 500
0861 GARMIN (427 646)
+27 (0)11 251 9800
+34 93 275 44 97
+ 46 7744 52020
+886 2 2642-9199 ext 2
0808 238 0000
+44 870 850 1242
913-397-8200
1-800-800-1020
+49 (0) 89 858364880
zum Ortstarif - Mobilfunk
kann abweichen
© 2015 Garmin Ltd. or its subsidiaries

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Has XFA                         : No
Language                        : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2016:01:25 13:01:23-06:00
Creator Tool                    : AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)
Modify Date                     : 2016:01:26 15:42:12-06:00
Metadata Date                   : 2016:01:26 15:42:12-06:00
Producer                        : Antenna House PDF Output Library 6.2.625 (Windows (x64))
Trapped                         : False
Format                          : application/pdf
Document ID                     : uuid:5c1f54ad-5ca7-4f6a-abd3-12b1ddb71667
Instance ID                     : uuid:6a320430-77ce-4939-b512-d9c86f533bdd
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 34
Creator                         : AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)

EXIF Metadata provided by EXIF.tools