Garnet Systems Co GV-4400 VGA Card User Manual View

Download:
Mirror Download [FCC.gov]
Document ID	121902
Application ID	fNIpvRpeCsFtt7hT3iR40Q==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	144.65kB (1808076 bits)
Date Submitted	2000-10-20 00:00:00
Date Available	2000-10-19 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Acrobat PDFWriter 3.0 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	View.PDF
Document Creator	Microsoft Word
Document Author:	Unknown

Garnet GeForce 2 MX
Twin View
(Model No. : GV-4400)
User's Manual
GARNET SYSTEMS CO., LTD.
¢ º This equipment has been tested and found against harmful radio
electromagnetic interference and can be installed and used in any
residential areas as well as offices.
¢ º Any copying or reproduction of this whole manual or part of
contents is strictly prohibited.
¢ º Information in this manual is subject to change without prior notice
for improvement.
Copyright(C) 2000 GARNET SYSTEMS CO., LTD.
¡ ÚGeForce2 MX is a registered trademark of nVIDIA
¡ ÚWindows 95/98/2000/NT is a registered trademark of Microsoft
Corporation.
¡ ÚOther trademarks are registered properties by their respective
holders.
Table of Contents
1. About Garnet GeForce2 MX Twin View
---------------------------- 4
1.1 Features of Garnet GeForce2 MX Twin View
1.2 Recommended System Requirements
1.3 Delivery Check
--------------------- 4
------------------------------------------------------5
1.4 Contents of Installing Program CD
2. Installation
-------------- 4
-------------------------- 5
------------------------------------------------------------------ 6
2.1 To install the Graphic Card into PC
2.2 Driver Installation
--------------------------6
--------------------------------------------------6
2.2.1 Driver Installation in Windows 9x
---------------------- 6
2.2.1.1 When replace existing VGA Card with Garnet
GeForce2 MX Twin View ---------------------------------7
2.2.1.2 When Windows 9x is re-installed after replacing
Graphic card
------------------------------------------------ 11
2.2.2 Driver installation in Windows 2000
2.2.3 Driver update in Windows NT4.0
2.3 Installation of DirectX 7.0a
------------------ 23
---------------------- 27
------------------------------------- 35
3. To Change Properties Set-up
-----------------------------------4. To set up Twin View
----------------------------------------------5. To set up TV Out
-------------------------------------------------6. Q & A
--------------------------------------------------------------------
36
37
38
39
GARNET
GeForce2 MX
1. About GARNET GeForce2 MX Twin View
Thank you very much for purchasing GARNET GeForce2 MX Graphic
Card. Please read carefully this manual in order to use this equipment
right. The information in this book including program and driver is
subject to change for updating and improvement of its performances.
1.1 Features of GARNET GeForce2 MX Twin View
This Graphic Card supports twin-view function with two D-SUB and
execute its role for Twin View such as office purpose and game and
other tasks at the same time.
¢ Á Extended Mode
- enables users to view with two monitors at the same time
- enables users to multitask with two different monitors.
¢ Á Clone Mode
GARNET
GeForce2 MX
- Mounted with High-speed GeForce MX chip, made by nVidia
- Supports AGP Execute Mode in AGP 4X or 2X, AGP Texturing, Fast
Write
- Capable to process 20 Mil Triangles, 700 Mega Texels
- Supports 2 independent Pixel Rendering Pipelines
- Realize superb graphic with Digital Vibrance Control
- Perform perfect graphics with newly-equipped NSR(Nvidia Shading
Rasterizer)
- Perform dynamic real image with 2nd generation T&L(Transform and
Lighting) engine
- Supports superlative game conditions with DirextX 7.0a, OpenGL
- Smooth surface control with H/W FSAA (Full Scene Anti-Aliasing)
function
- Supports stable 2048x1536 high resolution through 350MHz Ramdec
- Supports Video Acceleration function through such as DirectShow, MPEG-I, MPEG-II(DVD) for moving picture
- High-speed 32MB SDRAM
- Supports TV-Out Functions(Optional)
- 2048x1536 @60Hz Support.
1.2 Recommended System Requirements
PC : Pentium/P-II/P-III-grade or compatible system with AGP Slot
O/S : Windows 9x, Windows NT 4.0, Windows 2000
Memory : 64MB or more
Monitor : VGA Monitor (800 x 600 or higher @ 60Hz)
Hard Disk : 20MB or more
1.3 Delivery Check
- GARNET GeForce 2 MX Graphic Card 1 Piece
GARNET
GeForce2 MX
- Installation Program CD 1 Piece
- User's Manual 1 Piece
- composite Cable (TV-Out Model Only)
1.4 Contents of Installation Program CD
- DirectX 7.0a
- Win9x Driver
- Windows NT4.0 Driver
- Win2000 Driver
- User's Manual
Microsoft DirectX 7.0a
Windows95/98 Driver
Windows NT 4.0 Driver
Windows 2000 Driver
GARNET GeForce2 MX Twin View User
Manual
¢ ÑFor your reference, this graphic card may not be compatible with
some minor main boards, which do not perfectly support AGP
2.0-Compliant constant current 6A.
GARNET
GeForce2 MX
2. Installation
¢ ÑThe pictures shown in this manual are based on Windows 98 SE
and Windows 2000.
2.1 Installing Graphic Card into PC
Please read carefully and follow the instructions as below in order to
install GARNET GeForce2 MX Twin View.
¨ çTurn off power of your computer.
¨ èUndress the cover of your computer by unleashing bolts.
¨ éCheck whether AGP Bus Slot is in place or not. If not, it is
impossible to install. Remove and save the screw on the slot cover.
You will need it to secure the card in place.
¨ êHold the card upright by the metal edge, and carefully slide it
into the expansion slot. Gently apply pressure to the upper metal
edge only, making sure it snaps into AGP Bus Slot.
¨ ëFasten securely the card into place with the screw that fits into the
top notch of the metal bracket.
¨ ìDress the cover of your computer by leashing bolts.
¨ íConnect the Monitor with GARNET TNT2 Ultra Video Connector
¨ îTurn power on and check whether display is O.K.
2.2 Driver Installation
This section is the explanation on driver installation. Minimum
requirements for GARNET GeForce2 MX Twin View be Windows95
OSR2.1 or higher, Windows98, Windows NT4.0 (Service Pack 4),
Windows 2000, as O/S. And also, after installing driver, DirectX 7.0a is
recommended for correct display. (for DirectX installation, see page
#24.)
2.2.1 Driver Installation in Windows 9x
GARNET GeForce2 MX Windows 9x driver is operate-able in both
Windows 95 and 98. When operating system in your computer is
Windows 95 or 98 and you would like to replace only graphic card with
our Graphic Card, please review¡ 2̧.2.1.1¡ f¹or driver installation. And
when you would like to change O/S into Windows 9x after installing
GARNET
GeForce2 MX
Geforce2 MX altogether, please review 2.2.1.2 for driver installation.
2.2.1.1 When you are to replace existing VGA card with Garnet
GeForce2 MX
1) When Windows starts, PnP Bios recognized new VGA card and
 will come out on screen automatically as
below. Click  in the following picture.
2) Click  and  in the following picture.
GARNET
GeForce2 MX
3) Click  in the following picture.
4) Click  and  in the following picture.
5) Put driver installation CD on your CD-Rom drive and select Win9x
Driver and click  in the following picture.
GARNET
GeForce2 MX
6) Click  and  in the following picture.
7) Select Garnet GeForce2 MX and click  in the following picture.
10
GARNET
GeForce2 MX
8) Click  in the following picture.
9) Click  in the following picture.
11
GARNET
GeForce2 MX
10) Click  in the following picture and driver installation is
finished, re-starting your computer.
2.2.1.2 When Windows 9x is re-installed after replacing Graphic Card
in the following picture.
1) Click  in the  and  in the
following picture.
12
GARNET
GeForce2 MX
2) Double-click  in the  in the following
picture.
13
GARNET
GeForce2 MX
3) Click , , and  in the
following picture.
4) Click  and  in the following picture.
14
GARNET
GeForce2 MX
5) Click  at the  in the following
picture.
6) Click  and  in the following picture.
15
GARNET
GeForce2 MX
7) Click  in the following picture.
8) Click  and  in the following picture.
16
GARNET
GeForce2 MX
9) Put driver installation CD, select Win9x driver in the related drive
and click  in the following picture.
10) Click  in the following picture.
11) Select Garnet Geforce2 MX and click  in the following picture.
17
GARNET
GeForce2 MX
12) Click  in the following picture.
14) Click  in the following picture.
18
GARNET
GeForce2 MX
15) Click  in the following picture
19
GARNET
GeForce2 MX
16) Please click  in the following picture.
18) Please click  in the following picture.
20
GARNET
GeForce2 MX
2.2.2 Driver Installation in Windows 2000
? Windows 2000 installation driver is zipped. Please comply
with following instructions.
1) Click  in the  and double-click CD Rom
Drive in the following picture.
2) Double click  folder in the following picture.
3) Double click setup.exe file in the following picture.
21
GARNET
GeForce2 MX
4) Driver installation is being set up in the following picture.
5) Click  in the following picture.
22
GARNET
GeForce2 MX
6) Please click  in the following picture.
7) Click  in the following picture.
23
GARNET
GeForce2 MX
8) Driver Installation is finished.
2.2.3 Driver update in Windows NT 4.0
In order to install GARNET GeForce2 MX Twin View in Windows NT 4.0,
Service pack Version 4 or over is a must. Service Pack 4 can be
downloaded in web site www.microsoft.com.
1) Click , ,  and  in the following picture.
24
GARNET
GeForce2 MX
2) Click  in the following picture.
3) Click  in the following picture.
25
GARNET
GeForce2 MX
4) Click  in the following picture.
5) Put Installation CD and Click  in the following picture.
26
GARNET
GeForce2 MX
6) Click  and  in the following picture.
7) Click  in the following picture.
27
GARNET
GeForce2 MX
8) Click  in the following picture.
9) Click  in the following picture.
10) Click  in the following picture.
28
GARNET
GeForce2 MX
11) Click  in the following picture.
12) Click  in the following picture.
29
GARNET
GeForce2 MX
13) Click  in the following picture.
14) Click  in the following picture.
30
GARNET
GeForce2 MX
15) Click  in the following picture.
16) Driver installation is finished.
2.3 Installation of DirectX 7.0a
If DirectX 7.0a is already installed in your PC, you may skip this
section and do not have to re-install DirectX 7.0a. And if you
have to install new DirectX 7.0a, Please follow below
procedures.
1) Please double click dx7aeng.exe in \Dirctx7.0a\Directx directory and
click  in the following picture.
31
GARNET
GeForce2 MX
2) Click  in the following picture and the system will restart
booting automatically and installation will be finished.
32

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 32
Creator                         : Microsoft Word
Create Date                     : 2000³â 10¿ù 4ÀÏ Wednesday 10:40:32 ¿ÀÀü
Title                           : View.PDF
Author                          : Unknown
Producer                        : Acrobat PDFWriter 3.0 for Windows
Subject                         : 

EXIF Metadata provided by EXIF.tools