Gatekeeper Systems W9200 Remote Controlled Locking Wheel User Manual USA TRAINING MANUAL 2007
Gatekeeper Systems, Inc. Remote Controlled Locking Wheel USA TRAINING MANUAL 2007
Contents
- 1. Users Manual Part 1a
- 2. Users Manual Part 1b
- 3. Users Manual Part 2
- 4. Users Manual Part 3
Users Manual Part 3
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 82
Cold Pour Estimating Guide
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 83
SealMaster Cold Pour Sealant
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 84
SealMaster Cold Pour (cont.)
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 85
CrackMaster Hot Pour Applicator
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 86
CrackMaster Hot Pour Sealant
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 87
Concrete Sealant for Level Surfaces
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 88
Concrete Sealant for Level Surfaces (cont.)
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 89
Concrete Sealant for Non-Level Surfaces
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 90
Concrete Sealant for Non-Level Surfaces (cont.)
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 91
3M ScotchKote Electrical Coating
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 92
3M ScotchKote Electrical Coating (cont.)
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 93
Concrete Saw
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 94
Tempo Tracker II, Model 501
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 95
Tempo Tracker II, Model 501 (cont.)
Material Specification Sheets
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 96
Kleen Sweep 27
Training Checklist
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 97
12 Training Checklist
Technician: Training Location:
Gatekeeper Cart Containment System
Concept and Functionality
• System Components (Wheels, Antenna, Transmitter, CartKey, Site Management)
• Perimeter Based System – closed loop
• Store Personnel Training
Date: Completed: Yes No
Site Survey and System Layout
• Survey Checklist
• Site Plan (Key Measurements, Antenna Type, Transmitter Location, Sign Location)
• Single Loop Enclosed Perimeter (Sample Site Plans)
• Double Saw Cut (Sample Site Plans)
• Over Roof (Sample Site Plans)
• Multiple Lockbox and Twisted Pair (Sample Site Plans)
• Photograph Locations
• Drawing the Site Plan (Key Measurements, Transmitter and Sign Locations)
Date: Completed: Yes No
Materials Specifications
• Antenna Specifications (14G Traffic Cable, 14G Twisted Pair, 20G Antenna)
• Sealer and Pour Pot Specifications (OverKote & SealMaster)
• Antenna Splicing Specifications
• Concrete Saw Specifications
• Striping and Signage Specifications
• Tool List
Date: Completed: Yes No
Cart Containment System Installation
• Installation Preparation
• Arrive on site and check in with store management
• Confirm/determine the CentralTransmitter location
• Mark the perimeter area for the saw cut
Date: Completed: Yes No
Training Checklist
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 98
System Installation
• Saw cut the marked area
• Clean the saw cut
• Install the 14G locking line and twisted pair (use antenna specified in “Materials”)
• Splice the sections of antenna together
• Seal the saw cut (use pour pot and sealer specified in “Materials”)
• Mount the CentralTransmitter
• Measure and document antenna resistance (multi-meter required)
• Connect electrical power to the CentralTransmitter
• Calibrating the CentralTransmitter
• Connecting Alarm Relays to the CentralTransmitter
• Install the Parking Lot Signs
• Perimeter Striping
Date: Completed: Yes No
Cart Installation
• Install the anti-tilt bar
• Install the Gatekeeper Wheel
• Install the Cart-Mounted Signs
Date: Completed: Yes No
Store Training
• Train the store personnel
• Document store training
Date: Completed: Yes No
Training Checklist
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 99
Training Checklist - System Troubleshooting
Wheel Troubleshooting
• Determine the wheel type by revision code
• Potential failure modes and troubleshooting them
• Cart out-of-balance
Date: Completed: Yes No
Central Transmitter Troubleshooting
• Potential failure modes (visual alarm indicators)
Date: Completed: Yes No
Antenna Troubleshooting
• Visual inspection of the perimeter line
• Use of a Tone Generator (see Tool List) to find the break
• Dividing the antenna to find the break
• Proper splicing technique
Date: Completed: Yes No
Signal Coupling
• Explanation of signal coupling and possible causes
• Try to replicate the coupling
• Using a signal tester to look for extranious noise
• Solutions to eliminate coupling
Date: Completed: Yes No
Product Specifications
• W-9455 GS2 Wheel
• D-9110 CentralTransmitter
• D-9500 ExitManager
• K-9500 CartKey
Date: Completed: Yes No
I certify that the technician named below has completed the Gatekeeper Systems Inc. Field Service Training
Program and has been presented with the related coursework and training materials.
Technician:
Trainer: Date:
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 100
Index
A
alarm relays, 30
analog mode, 29
Anixter cable, 77
antenna alert relay, 30
antenna roller, 39
anti tilt bars, 35
audible alarm switch, 24
B
Belden cable, 78, 79
C
cart mounted signs, 36
CartKey, 5
Carttronics Caster, 29
caution tape, 37
CentralTransmitter
calibrating, 29
circuit board, 25
connecting power supply, 28
description, 4
determing location for, 7
front panel, 24
installing, 20
mounting, 23
power LED, 24
replacing the fuse, 71
system alert LED, 24
verifying power to, 66
cold pour estimating guide, 81
concrete
saw along expansion joints, 49
sealant for non-level surfaces, 88, 89
sealing, 49
self-leveling sealant, 86, 87
concrete saw, 38, 92
conduit, installing antenna wire in, 22
Core Cut saw, 92
coupling, 7, 72
CrackMaster Hot Pour Applicator, 84
CrackMaster Hot Pour Sealant, 85
D
documentation
post installation, 63
site survey, 10
door mode, 29
double saw cut locking loop, 8
E
EAS systems, 58
EP2000 mode, 29
ExitManager, 5, 53–58
G
Gatekeeper hook, 38
GS2 System and Components, 2–5
GS2 wheel
description, 3
installing, 35
resetting, 62
I
indoor cart containment systems, 57
information tracker, 30
installation
calibrating the CentralTransmitter, 29
cart mounted signs, 36
central transmitter location, 20
connecting alarm relays, 30
connecting power, 28
installing perimeter antenna, 22
marking antenna path, 20
mounting the CentralTransmitter, 23
overview, 17
parking lot signs, 33
perimeter striping, 31
photographs, 37
removing saw cut residue, 21
saw cutting, 21
sealing the saw cut, 23
selecting transmitter mode, 29
splicing the antenna, 45
tools and materials required, 18
K
Kleen Sweep, 38, 95
L
locking delay, 29
M
master unlock button, 24
material specification sheets, 76–95
mixed wheel environment, 74
mode selection, 29
P
parking lot signs
height, 50
installing, 50
overview, 33
sample layout, 34
setting posts, 51
perimeter antenna
across driveways, 9
cable types, 4
checking resistance, 67
GATEKEEPER SYSTEMS INC.
2007 CART CONTAINMENT MANUAL
Page 101
configurations, 8
cutting trench for, 21
finding defects, 68
installing, 22
locating, 93, 94
marking path for cutting, 20
material specifications, 77
on slopes, 9
splicing, 45
temporary unlock, 24
through an exterior wall, 20
through conduit, 22
through curbs, 41
through pvc, 43
troubleshooting with a tone generator and probe,
69
troubleshooting with the Tracker II, 70
with cart collection system, 9
perimeter striping, 31
sample site plan, 32
pourable crack sealant, 83
power alert relay, 30
Progressive Electronics tone generator and probe,
69
Q
Quick Start System Guide, 62
QuikRete Polyurethane Non-Sag Sealant, 88, 89
QuikRete Polyurethane Self Leveling Sealant, 86,
87
S
safety gear, 37
saw cuts, 21
cleaning, 95
cleaning and removing residue, 21
corners, 40
sealing, 23, 47, 80, 83, 84, 85
ScotchKote
spec sheets, 90, 91
using to seal wire splices, 45
SealMaster Cold Pour Sealant, 83
shopping cart stencils, 53
single locking loop, 8
single locking loop over building, 8
site diagram, 10
site plan
double saw cut locking loop, 13
lockbox and twisted pair combination, 14
single locking loop, 12
single locking loop over roof, 15
site survey, 6
checklist, 16
documentating, 10
photographing the site, 10, 11
splices, 45–47
locate existing, 70
striping
distance from antenna, 52
mask and paint, 52
paint for, 19
sample site plan, 32
step by step, 31
SW3, 29
system component requirements, 7
T
technical support, 63
Tempo Tracker, 93, 94
temporary unlock, 24
thermoplastic striping, 32
tone generator and probe, 69, 93, 94
Tracker II, 70
traffic loop, 14AWG wire, 77
training
GS2 training acknowledgement form, 60
store personnel, 59
training checklist, 96
transmitter mode, selecting, 29
Travelator, 3
Tri-American Cold Pour, 80
twisted pair
material specifications, 78, 79
twisted pair and lockbox combination, 8
U
unlock signal, 24
W
wheels
compatibility, 75
locking distance, 29
locking distance chart, 75
mixed environment, 74
wire caddy, 39