Gibson Innovations B5 Soundbar Speaker User Manual 13

Gibson Innovations Limited Soundbar Speaker 13

Users Manual

Download: Gibson Innovations B5 Soundbar Speaker User Manual 13
Mirror Download [FCC.gov]Gibson Innovations B5 Soundbar Speaker User Manual 13
Document ID2717492
Application IDvS7njqKUxhOoHZu5+q6woQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize96.26kB (1203220 bits)
Date Submitted2015-08-18 00:00:00
Date Available2015-08-19 00:00:00
Creation Date2015-08-13 18:30:49
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2015-08-13 18:36:50
Document Title13. User Manual.pdf
Document CreatorAdobe InDesign CC (Windows)
Document Author: User

Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
User manual
Contents
7 Wall mount your SoundBar
21
21
Wall mount
1 Important
Important safety instructions
Care for your product
Care of the environment
Help and support
2 Your SoundBar
Main unit
Remote control
Wireless portable speakers
Wireless subwoofer
Connectors
3 Connect and set up
Charge portable speakers
Pair up with subwoofer/speakers
Place speakers
Connect audio from TV
Connect audio from other devices
Connect digital devices through HDMI
4 Spatial calibration
Step 1: calibrate the listening zone
Step 2: calibrate the surround speaker
position
5 Use your SoundBar
Adjust the volume
Choose your sound
MP3 player
Play music via Bluetooth
Connect Bluetooth via NFC
Auto standby
Set display brightness
Apply factory settings
6 Update software
Check software version
Update software via USB
 3URGXFWVSHFLÀFDWLRQV
22
9 Troubleshooting
23
10 Notice
25
25
25
Notice of compliance
Trademarks
10
10
12
13
14
14
14
16
16
16
17
17
18
19
19
19
20
20
20
EN
1 Important
•
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
•
Important safety instructions
•
•
•
•
•
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources
such as radiators, heat registers, stoves, or
RWKHUDSSDUDWXV LQFOXGLQJDPSOLÀHUV WKDW
produce heat.
Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
SOXJGRHVQRWÀWLQWR\RXURXWOHWFRQVXOW
an electrician for replacement of the
obsolete outlet.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories
VSHFLÀHGE\WKHPDQXIDFWXUHU
EN
•
•
•
Use only with the cart, stand, tripod,
EUDFNHWRUWDEOHVSHFLÀHGE\WKH
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning
storm or when unused for long periods of
time.
Refer all servicing WRTXDOLÀHGVHUYLFH
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Battery usage CAUTION - To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the unit is not
used for a long time.
• The batteries shall not be exposed to
H[FHVVLYHKHDWVXFKDVVXQVKLQHÀUHRU
the like.
• Perchlorate Material - special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
• When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
• If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
•
Apparatus shall not be exposed to
dripping or splashing.
•
Do not place any sources of danger on
the apparatus IRUH[DPSOHOLTXLGÀOOHG
objects, lighted candles).
•
This apparatus may contain lead and
mercury. Dispose according to local, State
or Federal laws. For disposal or recycling
information, please contact your local
authorities. For additional assistance on
recycling options, please contact www.
mygreenelectronics.com or www.eiae.org
or www.recycle.philips.com.
•
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
Do not place this apparatus on the
furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing
or climbing on it. A falling apparatus can
cause serious injury or even death.
• This apparatus should not be placed in a
built-in installation such as a bookcase or
rack unless proper ventilation is provided.
Make sure to leave a space of 7.8 inches
(20cm) or more around this apparatus.
Class II equipment symbol
This symbol indicates that the unit has a double
insulation system.
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING:7RUHGXFHWKHULVNRIÀUHRU
electric shock, this apparatus should not be
H[SRVHGWRUDLQRUPRLVWXUHDQGREMHFWVÀOOHG
with liquids, such as vases, should not be placed
on this apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Care for your product
8VHRQO\PLFURÀEHUFORWKWRFOHDQWKHSURGXFW
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This product may contain lead and mercury.
Disposal of these materials may be regulated
due to environmental considerations. For
disposal or recycling information, please contact
EN
your local authorities or visit www.recycle.
philips.com.
This product contains non-removable batteries:
• Do not incinerate. Batteries may explode if
overheated.
• For disposal or recycling information,
please contact your local authorities or visit
www.recycle.philips.com.
2 Your SoundBar
Congratulations on your purchase, and
ZHOFRPHWR3KLOLSV7RIXOO\EHQHÀWIURP
the support that Philips offers, register your
SoundBar at www.philips.com/welcome.
Main unit
For extensive online support, visit www.philips.
com/support to:
• download the user manual and the quick
start guide
• watch video tutorials (available only for
selected models)
• ÀQGDQVZHUVWRIUHTXHQWO\DQVZHUHG
questions (FAQs)
• email us a question
• chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Consumer Care
in your country. Before you contact, note down
the model number and serial number of your
SURGXFWSPKR (speaker) is displayed on the
display panel.
Then perform the following Step 2
(calibrate the surround speaker position)
to complete and store the new settings.
Step 2: calibrate the surround
speaker position
14
•
Step 1: calibrate the listening
zone
Place the portable left and right speakers
(surround) on the position you prefer.
Press CALIBRATION once to trigger
calibration.
• Press CALIBRATIONthree times to
trigger calibration if you re-locate the
portable left and right speakers and
skip Step 1 (calibrate the listening
zone) after you completed a round of
spatial calibration previously.
Âť You can hear the calibration tones
from the portable speakers.
Wait until the calibration tones end.
Âť If the calibration succeeds, DONE
(done) is displayed on the display
panel. And the new settings are stored.
Note
• Spatial calibration takes around three minutes.
• Surround sound improvement is only noticeable if
•
•
•
•
the portable left and right speakers (surround) were
improperly placed, or if there is strong surround effect
in the music you play.
If the portable left and right speakers are swapped in
placement, during calibration L<->R is displayed for few
seconds, then the calibration completes.
During calibration, you may press CALIBRATION
to cancel calibration, and the settings returns to the
default.
If the spatial calibration fails, an error message is
displayed on the display panel, such as FAIL (fail), and
the settings returns to the default.
If the spatial calibration fails, try the spatial calibration
again, and make sure that the calibration points
described at the beginning of this chapter are fully met.
EN
15
5 Use your
SoundBar
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Switch the SoundBar to the correct source
for other devices.
Adjust the volume
Voice clarity
It makes human voice more clear and
outstanding for listening.
When the portable left and right speakers
are wirelessly connected to the main
unit (in SURROUND ON DEMAND
mode), press REAR VOL.+/- to increase or
decrease a volume level.
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
• Press MOVIE to create a surround listening
experience. Ideal for watching movie.
• Press MUSIC to create stereo sound. Ideal
for listening to music.
16
EN
To exit this sound mode, press MOVIE or
MUSIC to select other sound mode.
For ultimate clear sound without disturbing
your neighbors, place both the portable left and
right speakers close to you, and activate this
feature (to mute the main unit).
Synchronize video and sound
• It is applicable only when the portable left and right
•
Press and hold VOICE for three seconds
to activate the feature.
Âť CLOSE TO ME (close to me) scrolls
once on the display panel.
Âť The main unit is muted.
To exit this sound mode, press and hold
VOICE again for three seconds.
Âť The previous sound mode switches in.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
Press TREBLE +/- or BASS +/- to change
the frequency.
MP3 player
Connect your MP3 player to play your audio
ÀOHVRUPXVLF
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
If the audio and video are not synchronized,
delay the audio to match the video.
Note
speakers are wirelessly connected to the main unit (or
SURROUND ON DEMAND mode switches on).
If CLOSE TO ME (close to me) is turned on, the
functions for MOVIE and MUSIC buttons are disabled.
Press AUTO VOL. to turn auto volume on
or off.
Âť When auto volume is turned on, ON
AUTO scrolls once on the display
panel.
Âť When auto volume is turned off, OFF
AUTO scrolls once on the display
panel.
CLOSE TO ME (close to me)
Press +/- (Volume) to increase or decrease
a volume level.
• To mute sound, press .
• To restore the sound, press again or
press +/- (Volume).
For the portable left and right speakers only
Press VOICE to switch to voice clarity.
Âť When voice clarity is turned on,
VOICE is displayed.
It also compresses the sound dynamics,
increasing the volume for quiet scenes and
decreasing the volume for loud scenes.
Press AUDIO SYNC +/- to synchronize
the audio with the video.
• AUDIO SYNC + increases the sound
delay, and AUDIO SYNC - decreases
the sound delay.
Night mode
For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.
Press NIGHT to turn night mode on or
off.
Âť When night mode is turned on, ON
NIGHT scrolls once on the display
panel.
Âť When night mode is turned off, OFF
NIGHT scrolls once on the display
panel.
the night mode.
Press AUDIO IN.
Press the buttons on the MP3 player to
VHOHFWDQGSOD\DXGLRÀOHVRUPXVLF
• On the MP3 player, it is recommended
to set the volume in the range of 80%
maximum volume.
Play music via Bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
\RXFDQOLVWHQWRWKHDXGLRÀOHVVWRUHGRQWKH
device through your SoundBar speakers.
What you need
• A Bluetooth device which supports
%OXHWRRWKSURÀOH$'3DQGZLWK%OXHWRRWK
version as 2.1 + EDR.
• The maximum operational range between
the SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
Note
• The music streaming may be interrupted by obstacles
Note
• If auto volume is set to turned on, you cannot enable
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your SoundBar.
•
between the device and this product, such as wall,
metallic casing that covers the device, or other devices
nearby that operate in the same frequency.
If you want to connect this product with another
Bluetooth device, break the current Bluetooth
connection.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
EN
17
Bluetooth on the main unit
Press on the remote control to switch
the main unit to Bluetooth mode.
Âť BT on the display blinks.
On the Bluetooth device, switch on
Bluetooth, search for and select Fidelio B5
to start connection (see the user manual
of the Bluetooth device on how to enable
Bluetooth).
Âť During connection, BT on the display
blinks.
Wait until BT on the display lights up.
Âť If the connection succeeds, BT on the
display lights up.
6HOHFWDQGSOD\DXGLRÀOHVRUPXVLFRQ
your Bluetooth device.
• During play, if a call is coming, music
play is paused.
• If music streaming is interrupted, place
the Bluetooth device closer to the
main unit.
To exit Bluetooth, select other source.
Âť When you switch back to Bluetooth
mode, Bluetooth connection resumes.
•
To break the current Bluetooth
connection, press and hold on the
remote control.
•
Wait until the LED on the portable
speaker lights up.
Âť If the connection succeeds, connection
tone is heard, and the LED on the
portable speaker lights up.
6HOHFWDQGSOD\DXGLRÀOHVRUPXVLFRQ
your Bluetooth device.
• During play, if a call is coming, music
play is paused.
• If music streaming is interrupted, place
the Bluetooth device closer to the
main unit.
To exit Bluetooth, press the SURROUND
ON DEMAND button on the speaker.
Âť When you switch back to Bluetooth
mode, Bluetooth connection resumes.
•
To break the current Bluetooth
connection, press and hold the
button on the speaker.
Note
• The function of the remote control is not available to
Bluetooth on a single speaker
You can use the portable left or the portable
right speaker as a standalone Bluetooth speaker,
independently from the main unit.
18
Press the button on the left or right
speaker to switch to Bluetooth mode.
Âť The LED on the left or right speaker
blinks.
On the Bluetooth device, switch on
Bluetooth, search for and select the
name of the left or right speaker to start
connection (see the user manual of the
EN
a standalone Bluetooth speaker (the portable left or
right speaker).
Connect Bluetooth via NFC
NFC (Near Field Communication) is a
technology that enables short-range wireless
communication between NFC-enabled devices,
such as mobile phones.
What you need
• A Bluetooth device with NFC function.
For pairing, tap the NFC device on the
NFC tag of the main unit.
Note
• NFC feature is only available to the main unit, not
available to the portable left and right speakers.
Âť If the connection fails, the LED on
the portable speaker blinks.
Âť If the connection fails, BT on the
display blinks.
Bluetooth device on how to enable
Bluetooth).
• B5 -L portable stands for the portable
left speaker, B5 -R portable for the
portable right speaker.
Âť During connection, the LED on the
left or right speaker blinks.
Enable NFC on the Bluetooth device (see
the device' s user manual for details).
Tap the NFC device onto the NFC tag of
the main unit until the SoundBar beeps.
• )RUÀUVWWLPHFRQQHFWLRQRQVRPH
mobile devices prompt for pair-up
appears, select "YES" for connection.
Âť When the Bluetooth connection
succeeds, BT is displayed on the display
panel.
time you press a button on the remote
control.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
In AUX mode, on the remote control
press Volume -, BASS -, and TREBLE - in
sequence within three seconds.
Âť When the factory settings restore is
complete, the product automatically
switches off and restarts.
Âť If the connection fails, BT on the
display panel blinks continuously.
6HOHFWDQGSOD\DXGLRÀOHVRUPXVLFRQ
your NFC device.
• To break the connection, tap again the
NFC device onto the NFC tag on the
main unit.
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
if:
• no source button is pressed for 15
minutes, and
• no audio/video playback is detected from a
connected device.
Set display brightness
You can press DIM repeatedly to select a
different brightness level of the display panel on
this product.
• If you select DIM O (dim) on the display,
the display turns off after 10 seconds each
EN
19
6 Update software
Âť Then "UPG" (upgrade) is displayed on
the display panel.
To get the best features and support, update
your product with the latest software.
What you need
• $86%ÁDVKGULYHWKDWLV)$7IRUPDWWHG
Do not use a USB hard drive.
• A computer with Internet access.
• $QDUFKLYHXWLOLW\WKDWVXSSRUWVWKH=,3ÀOH
format.
Wait until the upgrade is completed.
Âť If the upgrade is complete, this product
automatically turns off and on again.
Caution
7 Wall mount
your SoundBar
Before you mount your SoundBar on the wall,
read all safety precautions.
• 'RQRWWXUQRIIWKHSRZHURUUHPRYHWKH86%ÁDVK
•
drive when the software update is in progress because
you might damage this product.
The upgrade time may take around eight minutes.
Wall mount
Note
Check software version
In HDMI ARC source, on the remote control
press TREBLE -, BASS -, and Volume - in
sequence within three seconds.
Âť The software version number is
displayed on the display panel.
Update software via USB
Check the latest software version on www.
philips.com/support.
• Search for your model and click on
"Software and drivers".
• You must detach the portable speakers from the main
unit before wall mounting or un-mounting.
• Improper wall mounting may result in accident, injury or
•
•
damage. If you have any query, contact Consumer Care
in your country.
Secure the wall mount to a wall that can support the
combined weight of the product and the wall mount.
Before wall mount, you need not remove the four
rubber feet at the bottom of the soundbar, otherwise
WKHUXEEHUIHHWFDQQRWEHÀ[HGEDFN
Screw length/diameter
Depend on the type of wall mounting this wall
mount bracket, make sure that you use screws
of a suitable length and diameter.
'RZQORDGWKHVRIWZDUHLQWRD86%ÁDVK
drive.
3 - 3.5mm
a Unzip the download if zipped, and
make sure that the unzipped folder is
named "UPG".
b Put the "UPG" folder in the root
directory.
20
&RQQHFWWKH86%ÁDVKGULYHWRWKH
(SERVICE) connector on this product.
Switch this product to HDMI ARC source
(press HDMI ARC).
On the remote control, within 6 seconds
press twice then Volume + once, and
then hold down MOVIE.
EN
> 25mm
See the illustration on the separate wall mount
sheet on how to wall mount the SoundBar.
1) Drill holes on the wall.
2) Secure the wall bracket on the wall with the
dowels and screws.
3) Hang the SoundBar on the wall bracket.
EN
21
8 Product
specifications
•
•
•
•
•
Note
• 6SHFLÀFDWLRQVDQGGHVLJQDUHVXEMHFWWRFKDQJHZLWKRXW
notice.
$PSOLÀHU
•
•
•
•
•
FTC total output power: 66W
• Front Left + Right: 16W (1%THD,
8ohm, 150Hz-20kHz)
• Surround Left + Right: 20W (1%THD,
8ohm, 150Hz-20kHz)
• Subwoofer: 30W (1%THD, 4ohm,
30Hz-140Hz)
Total output power: 210W RMS (+/- 0.5
dB, 30% THD) / 168W RMS (+/- 0.5 dB,
10% THD)
Frequency response: 20 Hz-20 kHz / Âą3
dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Input sensitivity:
• AUX: 750 mV
• AUDIO IN: 400 mV
Audio
•
S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Bluetooth
•
•
%OXHWRRWKSURÀOHV$'3
Bluetooth version: 2.1 + EDR
Main unit
•
Power supply: 110-240 V~, 50-60 Hz
22
EN
Power consumption: 50 W
6WDQGE\SRZHUFRQVXPSWLRQ”:
Dimensions (WxHxD): 1035 x 73 x 156
mm (with portable left and right speakers
attached)
Weight: 4.4 kg
Built-in speakers
• 2 x woofer (76 mm/3", 8 ohm)
• 2 x tweeter (25.4 mm/1", 8 ohm)
Portable speakers
•
•
•
•
Speaker impedance: 8 ohm
Speaker drivers: 2 x 76 mm (3") full range
Dimensions (WxHxD): 191 x 73 x 156
mm
Weight: 0.86 kg/each
9 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
Sound
Subwoofer
•
•
•
•
•
•
•
Power supply: 110-240 V~, 50-60 Hz
Power consumption: 30 W
6WDQGE\SRZHUFRQVXPSWLRQ”:
Impedance: 4 ohm
Speaker drivers: 1 x 165 mm (6.5") woofer
Dimensions (WxHxD): 200 x 510 x 201
mm
Weight: 4.9 kg
Wall mount
•
•
Dimensions (WxHxD): 40 x 100 x 26.5
mm
Weight: 0.1 kg/each
Remote control batteries
•
2 x AAA-R03-1.5 V
No sound from the speakers of this product.
• Connect the audio cable from this product
to your TV or other devices. However, you
do not need a separate audio connection
when:
• This product and TV are connected
through HDMI ARC connection, or
• a device is connected to the HDMI IN
connector on this product.
• Make sure that you connect the audio
input on this product to the audio output
on your TV or other devices.
• On the remote control, select the correct
audio input.
• Reset this product to its factory settings.
• Make sure that this product is not muted.
No sound from the wireless portable
speakers.
• Make sure that the wireless portable
speaker is turned on. Press ON on the
bottom of the wireless portable speaker.
• Dock the wireless portable speakers into
the main unit to charge the battery.
• If you intend the wireless portable speaker
to wirelessly connect to the main unit,
make sure that you press the SURROUND
ON DEMAND button on the wireless
portable speaker.
•
If you intend the wireless portable speaker
to be a standalone Bluetooth speaker,
make sure that you connect the portable
left or right speaker to a Bluetooth device
(see 'Bluetooth on a single speaker' on
page 18).
No sound from the wireless subwoofer.
• Wirelessly connect the subwoofer to the
main unit.
Distorted sound or echo.
• If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
Audio and video are not synchronized.
• Press AUDIO SYNC +/- to synchronize
the audio with the video.
Bluetooth
A device cannot connect with the SoundBar.
• The device does not support the
FRPSDWLEOHSURÀOHVUHTXLUHGIRUWKH
SoundBar.
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly.
• The SoundBar is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
EN
23
automatically to save power. This does not
indicate any malfunction of the SoundBar.
Spatial calibration
Why spatial calibration is needed?
• Spatial calibration optimizes surround
sound experience if your portable left and
right speakers (surround) are not properly
placed.
Improvement in surround sound is not
noticeable after successful spatial calibration.
• Surround sound improvement is only
noticeable if the portable left and right
speakers (surround) were improperly
placed, or if there is strong surround effect
in the music you play.
Error message is displayed on the display
panel.
• If spatial calibration fails, one of the
following error message is displayed. Refer
to the fourth chapter (Spatial calibration)
for details to re-calibrate.
• FAIL (fail): indicates that the
portable left/right speaker is not in
SURROUND ON DEMAND mode
or out of calibration range, or there is
some obstacle by which the main unit,
the portable left and right speakers
cannot completely "see" each other.
• BATT LOW (battery low): indicates
that the portable left/right speaker has
low battery.
• ERR1 (error): indicates that the
portable left and right speakers are not
detached from the main unit.
10 Notice
This section contains the legal and trademark
notices.
Notice of compliance
The device complies with the FCC rules, Part
15. Operation is subject to the following two
conditions:
a This device may not cause harmful
interference, and
b This device must accept any interference
received, including interference that may
cause undesired operation.
FCC rules
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
•
•
•
•
24
EN
Relocate the receiving antenna.
Increase the separation between
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
FCC Radiation Exposure Statement:This
equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with a minimum distance of
20cm between the radiator and your body.
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
Warning:$Q\FKDQJHVRUPRGLÀFDWLRQVPDGH
to this device that are not expressly approved
by Gibson Innovations may void the user’s
authority to operate the equipment.
Trade Name: Philips
Model number: B5/37
Wireless Speaker Model number: WSB5
Responsible Party:P&F USA, Inc. PO Box 2248
Alpharetta, GA 30023-2248; 1-866-226-6074
Canada:
CAN ICES-3(B)/NMB-3(B)
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following Two conditions: (1) this
device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Trademarks
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks, and
DTS Digital Surround is a trademark of DTS,
Inc. Š DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.
EN
25
7KHWHUPV+'0,DQG+'0,+LJK'HÀQLWLRQ
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
The Bluetooth word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Gibson
Innovations Limited is under license. Other
trademarks and trade names are those of their
respective owners.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
Š 2013 CSR plc and its group companies.
The aptXÂŽ mark and the aptX logo are
trade marks of CSR plc or one of its group
companies and may be registered in one or
more jurisdictions.
26
EN
2015 Š WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used
by WOOX Innovations Limited under license from
Koninklijke Philips N.V.
000000000000
English
Care of the environment
EspaĂąol
Disposal of your old product and battery
Important
Read and understand all instructions before you use your product. If damage is caused by failure to
follow instructions, the warranty does not apply.
Help and support
For extensive online support, visit www.philips.com/support to:
•
download the user manual and the quick start guide
watch video tutorials (available only for selected models)
•
Ànd answers to frequently answered questions (F$4s)
•
•
email us a question
•
chat with our support representative.
Follow the instructions on the website to select your language, and then enter your product model number.
$lternatively, you can contact &onsumer &are in your country. %efore you contact, note down the
model number and serial number of your product. 
Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : User
Modify Date                     : 2015:08:13 18:36:50+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:08:13 18:36:50+08:00
Creator Tool                    : Adobe InDesign CC (Windows)
Instance ID                     : uuid:b88b64e6-b3d2-4811-bdfd-a9cae1526c13
Original Document ID            : xmp.did:540CC0123072E011A125E833CCB2A077
Document ID                     : xmp.id:216e0b04-12e1-0845-9d20-cf0d3eec236c
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:6fb1db5c-cc8b-4a49-a917-6c2bbc5cca23
Derived From Document ID        : xmp.did:366CACE6AEC2E011A265BE935C16BD6C
Derived From Original Document ID: xmp.did:540CC0123072E011A125E833CCB2A077
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Windows)
History Changed                 : /
History When                    : 2015:07:13 14:27:14+08:00
Phsprop 2                       : 1000 series
Date Created                    : 2007:03:01
City                            : Groningen
Create Date                     : 2005:12:01 12:32:37Z
Ww numpages                     : 30
Ww pagecnt Cover Outside        : 1
Ww pagecnt Cover Inside         : 1
Ww pagecnt Content              : 26
Ww pagecnt Back Inside          : 1
Ww pagecnt Back Outside         : 1
Ww pagecnt lang                 : EN:26;
Format                          : application/pdf
Title                           : 13. User Manual.pdf
Creator                         : User
Producer                        : Acrobat Distiller 11.0 (Windows)
Trapped                         : False
Page Count                      : 18
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AANUB5

Navigation menu