Gigaset Communications C300H UPCS Phone User Manual Master BA SL565

Download:
Mirror Download [FCC.gov]
Document ID	1277149
Application ID	Hk7M+wxVqnbqIGXsxQudLw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	178.45kB (2230586 bits)
Date Submitted	2010-05-06 00:00:00
Date Available	2010-05-06 00:00:00
Creation Date	2010-04-16 08:54:38
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2010-04-16 09:15:36
Document Title	Master BA SL565
Document Creator	FrameMaker 7.2
Document Author:	Siemens AG

Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / introduction.fm / 16.04.2010
Gigaset C300/C300A – your high-quality accessory
Gigaset C300/C300A – your high-quality accessory
Congratulations on your purchase of this latest generation Gigaset.
Your Gigaset can do a lot more than just make calls:
Directory for up to 250 entries
Save phone numbers and names to the directory (¢ page 31). You can designate important
entries as VIPs (Very Important Persons). VIP calls are then recognised by their ringer and their
colour in the directory (¢ page 32).
If you don't (always) want it to ring
Use time control for calls (¢ page 52) or ensure that all calls from a withheld number are not
signalled (¢ page 53).
Other practical information
Transfer the directory from an existing Gigaset handset (¢ page 32), use the shortcut function (¢ page 32) and adjust the colour and contrast of the display to your requirements
(¢ page 51).
Protect our environment
Gigaset Green Home – Be environmentally aware when using your phone. Details about our
ECO DECT products can be found at www.gigaset.com/customercare.
Further information on your phone can be found at www.gigaset.com/gigasetc300.
After purchasing your Gigaset phone, please register it at www.gigaset.com/customercare –
this will ensure any questions you may have or warranty services you request are dealt with
even faster!
Version 4, 16.09.2005
Have fun using your new phone!
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / overview.fm / 16.04.2010
Overview
Overview
Ð Ã
14
13
10:53
23.04.10
12
INT
Redial
Menu
11
10
1 Signal strength (¢ page 17)
Colour / Symbol changes when Eco Mode / Eco
Mode+ is activated (¢ page 47)
2 Control key (¢ page 20)
Mute microphone (¢ page 29)
3 Talk/Handsfree key
Flashes: incoming call;
Lights up: handsfree mode activated;
accept call; open redial list (press briefly);
start dialling (press and hold);
During a call: switch between earpiece and
handsfree mode (¢ page 29)
4 Key 1
Dial answering machine (C300A)/
Network mailbox (press and hold)
5 Star key
Activate/deactivate ringer (press and hold);
With an open connection: switch between
pulse dialling/tone dialling (press briefly)
6 Message key (¢ page 33)
Access to call and message lists;
Flashes: new message or new call
7 Microphone
8 Recall key
- Recall
- Insert a dialling pause (press and hold)
9 Hash key
Keypad lock on/off (press and hold in
idle status);
Toggles between upper/lower case and digits
10 End call key, On/Off key
End call; cancel function; go back one menu
level (press briefly); back to idle status (press
and hold); activate/deactivate handset (press
and hold in idle status)
11 Display keys (¢ page 4)
12 Display in idle status
13 Battery charge status (¢ page 17)
14 Answering machine icon (C300A only)
Answering machine switched on;
Flashes: answering machine is recording
a message or is being operated by another
internal party
Version 4, 16.09.2005
Please note
To change the display language, proceed as
described on page 51.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / overview.fm / 16.04.2010
Overview
Understanding the display icons
The following symbols are displayed dependent on the settings and the operating status of
your telephone:
Signal strength i (¢ page 17)
or Eco Mode+ icon ¼ (¢ page 47)
Keypad locked (¢ page 22)
Ringer switched off (¢ page 53)
Answering machine activated (C300A only)
Battery charging (¢ page 17)
Battery charge status (¢ page 17)
Ð
º ó
Ã
10:53
23.04.10
INT 1
Ã
™
Current time (¢ page 16)
Current day, month and year (¢ page 16)
Name of the handset (¢ page 50)
Ë
11 5
¼ 06:30
INT 1
Redial
Number of new messages:
u à on the network mailbox / answ. mach. (¢ page 33)
u ™ in the missed calls list (¢ page 33)
u Ë in the SMS list (¢ page 37)
Alarm switched on and wake up time set (¢ page 48)
Menu
Display keys (¢ page 4)
Display during external call:
1234567890
Version 4, 16.09.2005
00:03:11
Menu
Connection established
Number (or name) of caller (¢ page 27)
Call duration
Display key (¢ page 4)
u Two-way recording on answering machine (¢ page 43)
u Set call volume (¢ page 52)
u Access service information
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / overview.fm / 16.04.2010
Using the display keys
Other display icons:
Connection cannot
be established or connection interrupted
Establishing a connection
Connection established
External call (¢ page 27)
Internal call (¢ page 49)
Alarm call (¢ page 48)
Answering machine
is recording (¢ page 41)
Please wait...
Û
Information
Query
μ
Action failed
ØÜÚ
ØìÚ
Ø þÚ
Ð
Action complete
À
Using the display keys
Main menu icons
The functions of the display keys change
depending on the particular operating situation. Example:
Redial
Menu
Version 4, 16.09.2005
ì
Alarm Clock
1 Current display key function
2 Display keys
Important display keys:
Redial
Open redial list.
Menu
Open a menu for further functions.
OK
Confirm selection.
Delete
Delete key: Delete character by
character/word by word from
right to left.
Back
Go back one menu level or cancel operation.
¶
Back
Ë
ì
Ì
Ï
OK
SMS
Alarm Clock
Voice Mail
Settings
Information on using the menus ¢ page 21
Menu overview ¢ page 25
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / overview.fm / 16.04.2010
Base overview
Base overview
You can use the keys on the base to operate
the integrated answering machine
(Gigaset C300A only), search for handsets
(paging, ¢ page 49) and register handsets
to the base (¢ page 48).
Gigaset C300A base
4 Play/Stop key
Play back new message from answering
machine (press briefly), play back all messages
(press and hold) or cancel playback.
Flashes: at least one new message is present.
Flashes very quickly: memory is full.
During message playback:
5 Go to the next message.
6 Skip to the start of the current message
(press once) or go to the previous message
(press twice).
7 Delete current message.
Please note:
If the answering machine is being operated
from a handset or if it is recording a message
(On/Off key flashes), it cannot be operated
from the base at the same time.
Gigaset C300 base
Version 4, 16.09.2005
1 Registration/Paging key
Search for handsets (press briefly, paging
¢ page 49).
Register handsets (press and hold,
¢ page 48).
2 On/Off key
Activating/deactivating the answering machine.
Lights up: answering machine is activated.
Flashes: message is being recorded.
3 Volume keys (÷ = quieter; ø = louder)
During message playback: adjust the speaking
volume.
While phone is ringing: adjust ringer volume.
Registration/Paging key
– Press briefly: search for handsets (paging)
¢ page 49.
– Press and hold: register handsets and DECT
devices ¢ page 48.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / C300AIVZ.fm / 16.04.2010
Contents
Contents
Gigaset C300/C300A – your high-quality accessory . . . . . . . . . . . . . . . . . . 1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Understanding the display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using the display keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Main menu icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Base overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Following safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Taking the first steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Checking the package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the base and charging cradle (if included) . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the charging cradle (if included) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the handset for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What would you like to do next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
11
11
12
13
15
16
19
Using the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using the control key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using keys on the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correcting incorrect entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating keypad lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Understanding the operating steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
20
20
21
22
22
23
Menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Making an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accepting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Calling Line Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes on calling line display (CLIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using handsfree mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching to mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifying automatic network provider code (preselection) . . . . . . . . . . . . . . . . . . .
27
27
27
27
28
29
29
29
Version 4, 16.09.2005
Using the directory and lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the redial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening lists with the message key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the incoming message list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
33
33
34
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / C300AIVZ.fm / 16.04.2010
Contents
Answering machine list (Gigaset C300A only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Call list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Sending SMS (text messages) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Writing/sending SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving an SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting SMS centres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving SMS messages on a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating SMS function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting SMS problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
37
38
39
39
39
Operating the Gigaset C300A base answering machine . . . . . . . . . . . . . 41
Operating via the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating call screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the recording parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the language for voice prompt and pre-recorded announcement . . .
Resetting fast access for the answering machine using key 1 . . . . . . . . . . . . . . . . . .
Operating when on the move (remote operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
43
44
44
44
45
Using the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Using fast access for the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Viewing the network mailbox message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Using the handset as an alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Using multiple handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
De-registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locating a handset (paging) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making internal calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Listening in to an external call (conference) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the name of a handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
48
49
49
49
49
50
50
Handset settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Quick access to numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the display/screensaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating auto answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the handsfree/earpiece volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring the handset default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
51
51
51
51
52
52
53
Version 4, 16.09.2005
Base station settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Activating/deactivating music on hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating repeater support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protecting against unauthorised access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resetting the base to the default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
54
54
54
55
Connecting the base to the PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / C300AIVZ.fm / 16.04.2010
Contents
Dialling mode and Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching temporarily to tone dialling (DTMF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Questions and answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Industry Canada Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
56
56
56
57
59
FCC / ACTA Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
End-user limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Protecting our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Caring for your telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Writing and editing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
66
66
66
67
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Mounting the base on the wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Mounting the charger on the wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Version 4, 16.09.2005
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / security.fm / 16.04.2010
Following safety precautions
Following safety precautions
Warning
Be sure to read this user guide and the safety precautions before using your telephone.
Explain their content and the potential hazards associated with using the telephone to your
children.
Use only the power adapter supplied, as indicated on the underside of the base.
Use only rechargeable batteries that correspond to the specification provided on
page 66, as this could otherwise result in significant health risks and personal injury.
Do not charge the handset in the charger or base while the headset is connected.
Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your particular environment e.g., doctor's surgery.
Do not hold the rear of the handset to your ear when it is ringing or when speaker
mode is activated. Otherwise you risk serious and permanent damage to your hearing.
Your Gigaset is compatible with the majority of digital hearing aids on the market.
However, perfect function with all hearing aids cannot be guaranteed.
The handset may cause interference in analogue hearing aids. If you require assistance, please contact the hearing aid supplier.
Do not install the base or charger in bathrooms or shower rooms. The base and
charger are not splashproof (¢ page 66).
Do not use your phone in environments with a potential explosion hazard (e.g., paint
shops).
ƒ
If you give your Gigaset to a third party, make sure you also give them the user guide.
Remove faulty bases from use or have them repaired by our Service, as these could
interfere with other wireless services.
Please note
Version 4, 16.09.2005
u Not all of the functions described in this user guide are available in all countries.
u The device cannot be used in the event of a power failure. It is also not possible to transmit emergency calls.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
Taking the first steps
Checking the package contents
or
Version 4, 16.09.2005
1 One Gigaset C300/C300A base
2 One power adapter for the base
3 One Gigaset handset
4 Two batteries
5 One battery cover
6 One phone cord
7 One user guide
If you have purchased a
model with multiple handsets, the package should
contain two batteries, a battery cover and a charging
cradle 8 with power
adapter 9 for each additional handset.
10
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
Setting up the base and charging cradle (if included)
The base and charging cradle are designed for use in dry rooms in a temperature
range of +5°C to +45°C.
¤ Set up the base at a central point in the building on a level, non-slip surface or
mount the base or charger on the wall (¢ page 72).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. The range is reduced when Eco Mode is activated (¢ page 47).
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
Connecting the base
¤ First, connect the power adapter 1.
¤ Then connect the telephone jack 2
and insert the cables into the cable
ducts.
Please note:
Version 4, 16.09.2005
u The power adapter must always be
connected, as the phone will not
operate without a mains connection.
u Use only the power adapter and
phone cord supplied. Pin connections on telephone cables can vary
(pin connections, ¢ page 67).
u The answering machine is ready for
use approx. 15 seconds after the
base has been connected or reset.
11
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
Connecting the charging cradle (if included)
¤ Connect the flat plug from the
power adapter 1.
¤ Plug the power adapter into the
plug socket 2.
To disconnect the plug from the charger,
press the release button 3 and disconnect
the plug 4.
Version 4, 16.09.2005
12
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
Setting up the handset for use
The display is protected by a plastic film.
Please remove the protective film!
Inserting the battery and closing the battery cover
Warning
Use only rechargeable batteries recommended by Gigaset Communications
GmbH (¢ page 66), as this could otherwise result in significant health risks and
personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The phone could also malfunction
or be damaged as a result of using batteries that are not of the recommended
type.
¤ Insert the batteries with
the polarity in the correct direction.
The polarity is indicated
in the battery compartment.
¤ First insert the battery
cover at the top a.
¤ Then press the cover b
until it clicks into place.
Version 4, 16.09.2005
To open the battery cover, for
instance to replace the batteries,
insert a coin into the cavity on the
casing, then pull the battery cover
in an upward direction.
13
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
Initial charging and discharging of the batteries
The correct charge status can only be displayed if the battery is first fully charged
and discharged.
¤ Charge the handset in the base for 8.5 hours.
8.5 hrs
Please note
The handset must only be placed in the designated Gigaset C300/C300A base
or charging cradle.
¤ After charging, remove the handset from the base and only replace it when the
batteries are fully discharged.
Please note
Version 4, 16.09.2005
u The handset is pre-registered with the base. If you have purchased a model
with multiple handsets, all handsets will already be registered with the
base. You do not need to register the handset again.
u After the first battery charge and discharge, you may place your handset in
the charger after every call.
u Always repeat the charging and discharging procedure if you remove the
batteries from the handset and reinsert them.
u The batteries may warm up during charging. This is not dangerous.
u After a while, the charge capacity of the batteries will decrease for technical
reasons.
14
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
Changing the display language
Change the display language, if you do not understand the language currently set.
¤ Press right on the control key..
L4
English
³
¤ Press the keys Land 4 slowly
one after the other.
The display for setting languages appears.
The current language (e.g. English) is
selected.
¤ Press down on the control key s ...
Francais
Back
... until the language you wish to use
is displayed, e.g. French.
´
OK
Francais
English
³
¤ Press the key below §OK§ to select this
language.
The selection is marked with ³.
Version 4, 16.09.2005
¤ Press and hold the end call key a to return to idle status.
15
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Please note
Depending on your network provider, the date and time may be displayed
automatically.
INT 1
Redial
Time
¤ Press the key below §Time§ on the display
screen to open the input field.
(If you have already set the time and
date, open the input field via the menu
¢ page 26.)
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter the day, month and year as an
8-digit number via the keypad,
e.g., Q4Q42Q Q
for 4 April 2010.
Enter Date:
[04.04.2010]
To change the input position,
e.g., to correct an entry, press
right or left on the control key.
Back
OK
¤ Enter the hours and minutes in
4-digit format via the keypad,
e.g., QM 5 for 07:15 am.
Change the input position with
the control key if necessary.
Enter Time:
[07.15]
Version 4, 16.09.2005
Back
¤ Press the key below §OK§ on the display
screen to save your entry.
OK
¤ Confirm with §OK§.
16
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
μ
Saved
The display shows Saved. You will hear
a confirmation tone and the handset
automatically reverts to idle status,
or returns to the "Settings" menu if
the setting was made via the menu.
Please note
If your phone receives the date and time during calling line display (e.g., via your
network provider, a router or PABXs), you can specify whether this data should
be copied to your phone:
§Menu§ ¤ *#Q5#M3 ¤ Q or
or 2 ¤ §OK§
u Q: Never
: Once, in case the date/time is not set on your phone
u 2: Always
Display in idle status
Once the phone is registered and the time set, the screen display is as follows
(example).
Version 4, 16.09.2005
Screen display
Ð Ã
u Reception between the base and the handset:
10:53
– Good to poor: Ð i Ñ Ò
23.04.10
– No reception: | flashes
Green: Eco Mode is activated (¢ page 47)
INT 1
u Activating the answering machine:
Ã: Your answering machine is set with
Redial
Menu
a pre-recorded announcement.
u Battery charge status:
– U white: charged over 66 %
– V white: charged between 33 % and 66 %
– e white: charged between 10% and 33%
– = red: charged below 10%
– = e V V white: battery charging
u INT 1
Internal name of the handset (¢ page 50)
If Eco Mode+ (¢ page 47) is activated, the ¼ icon is displayed in the top left.
17
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
Version 4, 16.09.2005
Your phone is now ready for use!
18
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Taking the first steps
What would you like to do next?
Now that you have successfully set up your Gigaset, you can immediately start calling – or you can adapt it to your personal requirements. Use the following guide to
quickly locate the most important functions.
Information on ...
Using the phone
Setting ringtones
Recording your own announcement for the
answering machine
Registering existing Gigaset handsets to a base
Transferring directory entries from existing Gigaset
handsets to new handset(s)
Setting Eco Mode / Eco Mode+
Sending SMS
Operating the telephone on a PABX
Setting the earpiece volume
... is located here.
page 20
page 52
page 41
page 48
page 32
page 47
page 36
page 56
page 52
Version 4, 16.09.2005
If you have any questions about using your phone, please read the tips
on troubleshooting (¢ page 57) or contact our Service team
(¢ page 62).
19
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Using the phone
Using the phone
Using the control key
In the description below, the side of the control key (up, down,
right, left) which you have to press in the different operating situations is marked in black, e.g., v for "press the right edge of the
control key".
The control key has a number of different functions:
When the handset is in idle status
Open the main menu.
Open the directory.
Open the list of handsets.
Call up the menu for setting the handset's call volume (¢ page 52).
In menus and lists
t/s
Scroll up/down line by line.
In input fields
You can use the control key to move the cursor up t, down s, right v or left u.
During an external call
Mute the microphone.
Open the directory.
Initiate an internal consultation call.
Adjust the loudspeaker volume for earpiece and handsfree mode.
Using keys on the keypad
c / Q / * etc.
Press the matching key on the handset.
Enter digits or letters.
Correcting incorrect entries
Version 4, 16.09.2005
You can correct incorrect characters in the input fields by navigating to the incorrect entry using the control key. You can then:
u Use the display key §Delete§ to delete the character to the left of the cursor.
u Insert characters at the cursor position.
u Overwrite the highlighted (flashing) character e.g., when entering time and
date.
20
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Using the phone
Using the menus
Your telephone's functions are accessed via a menu consisting of several levels
(menu overview, ¢ page 25).
Main menu (first menu level)
¤ With the handset in idle status, press the display key §Menu§ or right on the control
key v to open the main menu.
The functions in the main menu are displayed in the
form of a list with names and icons (example on the
Ï
right).
Selecting a function
Settings
¤ You can scroll between functions using the control
key q. The selectable function is shown in the
display.
Back
OK
¤ Press the display key §OK§ or right on the control
key v to select the displayed function. This opens
the corresponding submenu and the first entry is
displayed.
If you press the display key §Back§ or briefly press the end call key a, the display
returns to idle status.
Submenus
The functions in the submenu are displayed with the corresponding names.
Selecting a function
¤ You can scroll between functions using the control key q. The relevant function
is shown in the display.
¤ Press the display key §OK§ to select the displayed function. This opens the corresponding submenu and the first entry is displayed.
Briefly press the display key §Back§ or the end call key a to return to the previous
menu level or cancel the operation.
Any settings you have not confirmed by pressing §OK§ will be discarded.
Reverting to idle status
Version 4, 16.09.2005
From any point in the menu:
¤ Press and hold the end call key a or
¤ Do not press any key: after 2 minutes, the display will automatically revert to
idle status.
An example of the display in idle status is shown on page 17.
21
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Using the phone
Activating/deactivating the handset
In idle status, press and hold the end call key (confirmation tone).
Activating/deactivating keypad lock
Keypad lock prevents any inadvertent use of the phone.
In idle status, press and hold the hash key (confirmation tone).
The keypad lock is switched on or off. When it is switched on,
the º icon appears in the display.
If the keypad lock is activated, a corresponding message is displayed when you
press a key.
Keypad lock deactivates automatically when you receive a call. It is reactivated
when the call is finished.
Please note
Version 4, 16.09.2005
When keypad lock is active, you cannot even call emergency numbers.
22
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Using the phone
Understanding the operating steps
The operating steps are shown in abbreviated form, for example:
§Menu§ ¤ Settings ¤ Eco Mode (³ = on)
¤ This means you should proceed as follows:
Redial
Menu
¤ Press the key below §Menu§ on the display screen to open the main menu.
¤ Press down on the control key s ...
Ï
... until the menu item Settings
appears on the screen.
Settings
Back
OK
¤ Press the key below §OK§ on the display
screen to confirm your selection.
Version 4, 16.09.2005
¤ Press down on the control key s ...
23
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / starting.fm / 16.04.2010
Using the phone
Eco Mode
Back
³
OK
... until the Eco Mode menu item
appears.
¤ Press the key below §OK§ on the display
screen to switch the function on or off
(³ = on).
Version 4, 16.09.2005
¤ Press the key below §Back§ on the display screen to jump back to the previous
menu level.
Or
Press and hold the end call key a to return to idle status.
24
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / menuetree.fm / 16.04.2010
Menu overview
Menu overview
The menu entries are partially subdivided. The page numbers refer to the relevant description in the user guide.
To open the main menu: press the display key §Menu§ when the phone is in idle mode.
Ë SMS
Write Message
¢ page 36
Incoming
¢ page 38
Outgoing
¢ page 36
Service Centres
¢ page 38
Activation
¢ page 48
Wake up time
¢ page 48
ì Alarm Clock
Ì Voice Mail
Play Messages
Answerphone *
Call Screening *
Network Mailbox **
¢ page 46
Answer Machine **
¢ page 41
¢ page 41
Handset
¢ page 43
Base
Announcements *
Message Length *
Record Announcement
¢ page 41
Play Announcement
¢ page 41
Delete Announcement
¢ page 42
Unlimited
¢ page 44
1 Minute
2 Minutes
3 Minutes
Ring Delay *
Immediately
¢ page 44
10 sec
18 sec
30 sec
Version 4, 16.09.2005
Auto
25
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / menuetree.fm / 16.04.2010
Menu overview
Network Mailbox
Set Key 1 *
¢ page 46
Network Mailbox
¢ page 46
Answer Machine
¢ page 46
*) Base with answering machine only
**) Base with answering machine and number of network mailbox is already entered
Ï Settings
Date/Time
Audio Settings
Display
Language
Registration
Telephony
¢ page 16
Call Volume
¢ page 52
Ringer Volume
¢ page 52
Advisory Tones
¢ page 52
Battery Low
¢ page 52
Ringtones (Handset)
¢ page 52
Ringtones (Base)
¢ page 54
Screensaver
¢ page 51
Colour Schemes
¢ page 51
Contrast
¢ page 51
Backlight
¢ page 51
¢ page 51
Register Handset
¢ page 48
Select Base
¢ page 49
De-register Handset
¢ page 49
Auto Answer
¢ page 51
Listening in
¢ page 50
Calls List Type
¢ page 34
Preselection
¢ page 29
Local Area Code
Extra Codes
Version 4, 16.09.2005
System
26
Music on hold
¢ page 54
Reset Handset
¢ page 53
Base Reset
¢ page 55
Repeater Mode
¢ page 54
System PIN
¢ page 54
Eco Mode
¢ page 47
Eco Mode+
¢ page 47
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / telefony.fm / 16.04.2010
Making calls
Making calls
When the display backlight is switched off
(¢ page 51), pressing any key will activate
the backlight. The relevant key function is
performed.
Making an external call
External calls are calls using the public telephone network.
~c
Enter the number and press the
talk key.
Or:
c~
Press and hold the talk key c
and then enter the number.
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call while
the call is in progress.
Please note
Dialling with the directory (¢ page 31),
call list (¢ page 34) and redial list
(¢ page 33) saves you from repeatedly
keying in phone numbers.
Using Calling Line
Identification
When you receive a call, the caller's number
and/or name is displayed on the screen, if
the following prerequisites are met.
u Your network provider supports CLIP, CLI
and CNIP.
– CLI (Calling Line Identification):
The caller's number is transmitted.
– CLIP (Calling Line Identification
Presentation): The caller's number
is displayed.
– CNIP (Calling Name Identification
Presentation): The caller's name
is displayed.
u You have requested CLIP or CNIP from
your network provider.
u The caller has requested CLI from the network provider.
Ending a call
Call display with CLIP/CLI
If the caller's number is saved in your directory, the caller's name will be displayed.
Press the end call key.
Accepting a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing talk key c.
To accept the call, press the talk key c.
Gigaset C300A: Instead of accepting the call,
you can also redirect it to the answering
machine:
§Menu§ ¤ Divert to AM ¤ §OK§
Version 4, 16.09.2005
If the ringer is intrusive, you can deactivate
it:
§Menu§ ¤ Silent ¤ §OK§
You can accept the call as long as it is displayed on the screen.
If the handset is in the charger and the Auto
Answer function is activated (¢ page 51),
the handset automatically answers calls
when you remove it from the base/charger.
ØÜÚ
1234567890
Menu
1 Ringer icon
2 Number or name of caller
The following is displayed in place of the
number:
u External Call, if no number is transmitted.
27
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / telefony.fm / 16.04.2010
Making calls
u Withheld, if the caller has withheld Calling Line Identification.
u Unavailable, if the caller has not
arranged Calling Line Identification.
Display with CNIP
If you have CNIP, then the name (town/city)
that is registered with your network provider
for the caller's number will also be displayed.
If the number of the caller is stored in your
directory, the CNIP display is replaced by the
corresponding directory entry.
ØÜÚ
1234567890
Anna Lechner,
London
Menu
1 Caller's number
2 Name and town/city
The display shows:
u External Call, if no number is transmitted.
u Withheld, if the caller has withheld Calling Line Identification.
u Unavailable, if the caller has not
arranged Calling Line Identification.
Please note
Version 4, 16.09.2005
The ringtone can be switched off for
unknown calls (calls with Calling Line
Identification restricted) (¢ page 53).
28
Notes on calling line display
(CLIP)
By default, the number of the caller is shown
in the display of your Gigaset telephone. You
do not have to make any other settings on
your Gigaset telephone.
However, if the caller's number is not
displayed, this can be due to the
following:
u You have not ordered CLIP from your network provider or
u Your telephone is connected via a PABX
or a router with an integrated PABX (gateway) that does not transmit all information.
Is your telephone connected via a
PABX/gateway?
You can establish this by checking for an
additional device connected between your
telephone and house connection, e.g., a
PABX, gateway etc. In most cases, simply
resetting this device will remedy the situation:
¤ Briefly disconnect the mains plug of your
PABX. Re-insert the plug and wait for the
device to restart.
If the caller number is still not
displayed:
¤ Check the CLIP settings of your PABX and
activate this function if necessary. In the
user guide for the device, search for the
term "CLIP" (or an alternative term such
as "calling line identification", "phone
number transmission", "caller ID", ...).
If necessary, contact the device manufacturer.
If this does not resolve the problem, it is possible that your network provider does not
the CLIP service for this number.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / telefony.fm / 16.04.2010
Making calls
Have you ordered the calling line
display service from your network
provider?
Switching to mute
Using handsfree mode
Specifying automatic
network provider code
(preselection)
¤ Check whether your provider supports
calling line display (CLIP) and that the
function has been activated for you. If
necessary, contact your provider.
Additional information on this subject can
be found on the Gigaset homepage at:
www.gigaset.com/customercare
In handsfree mode, you activate the loudspeaker so that you can hear the caller without having to hold the handset to your ear.
You therefore have both hands free and
other people can listen in on the conversation.
Please note
Inform your caller before you use the
handsfree function so that the caller
knows a third party may be listening.
Activating/deactivating handsfree
mode
Version 4, 16.09.2005
During a call and when listening to the
answering machine (Gigaset C300A only),
activate or deactivate handsfree mode.
Press the handsfree key.
Each key press switches
between handset and handsfree mode. If handsfree mode is
activated, the key is lit up.
If you wish to place the handset in the
charger during a call:
¤ Press and hold handsfree key d while
placing the handset in the base/charger
and for a further 2 seconds.
For instructions on adjusting the handsfree
volume, please see page 52.
You can deactivate your handset's microphone during a call.
Press right on the control key to
mute the handset. The display
shows Microphone is switched
off.
Press the key again to reactivate
the microphone.
You can store a call-by-call number (preselection number), which is automatically
placed in front of numbers when you dial
them.
In the With Preselection list, specify the
access codes or the first digits of the access
codes that you wish to assign to the preselection number.
In the Without Preselection list, enter the
exceptions to the With Preselection list.
Example:
Preselection Number
0999
With Preselection
08
Without Preselection
081
084
All numbers that start with 08, except for 081
and 084, are dialled with the preselection
number 0999.
Phone number
Dialled number
07112345678
¤
07112345678
08912345678
¤
0999 08912345678
08412345678
¤
08412345678
29
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / telefony.fm / 16.04.2010
Making calls
Saving preselection numbers
§Menu§ ¤ Settings ¤ Telephony
¤ Preselection ¤ Preselection Number
Enter or change the preselection number (call-by-call
number).
§OK§
Press the display key.
Save or change entries in the
preselection lists
Each of the two lists can contain 11 entries,
each with 4 digits.
Depending on the country, numbers may be
preset in the With Preselection list. This
means, for example, that all national calls or
calls to the mobile network are automatically linked to the preselection number you
have saved previously.
§Menu§ ¤ Settings ¤ Telephony
¤ Preselection ¤ With Preselection /
Without Preselection
Select entry.
Enter or edit the first digits of
the number.
§OK§
Press the display key.
Temporarily cancelling
preselection
c (press and hold) ¤ §Menu§ ¤ Automatic
Preselect off ¤ ~ (dial number)
Permanently deactivating
preselection
§Menu§ ¤ Settings ¤ Telephony
¤ Preselection ¤ Preselection Number
Press and hold the display key
until the preselection number is
deleted.
§OK§
Press the display key.
Version 4, 16.09.2005
§Delete§
30
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / direct_charges.fm / 16.04.2010
Using the directory and lists
Using the directory and
lists
The options are:
u Directory
u Redial list
u Incoming message list
u Call lists
u Answering machine list
(Gigaset C300A only)
You can create a personalised directory for
your own handset. You can also send lists/
entries to other handsets (¢ page 32).
Directory
You can save up to 250 entries in the directory.
Please note
To quickly access a number from the
directory (shortcut), you can assign the
number to a key (¢ Using shortcut keys,
page 32).
In the directory, you can save:
u Numbers and corresponding names
u VIP ringer melodies and colours
Open the directory in idle status using the
s key.
Length of the entries
Number:
Name:
Saving a number in the directory
s ¤ §Menu§ ¤ New Entry
Enter the number and press §OK§.
Enter the name and press §OK§.
Order of directory entries
Directory entries are generally sorted alphabetically by surname. Spaces and digits take
first priority.
The sort order is as follows:
1. Space
2. Digits (0–9)
3. Letters (alphabetical)
4. Other characters
To work round the alphabetical order of
entries, insert a space or a digit before the
first letter of the name. These entries will
then move to the beginning of the directory.
Selecting a directory entry
Open the directory.
You have the following options:
u Use s to scroll through the entries until
the required name is selected.
u Enter the first letter of the name; use the
s key to scroll to the entry if necessary.
Selecting from the directory
s ¤ s (Select entry)
Press the talk key.
max. 32 digits
max. 16 characters
Saving the first number in the
directory
s ¤ Dir. empty New Entry?
Enter the number and press §OK§.
Version 4, 16.09.2005
Enter the name and press §OK§.
31
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / direct_charges.fm / 16.04.2010
Using the directory and lists
Managing directory entries
s ¤ s (Select entry)
§Menu§
Press the display key.
Version 4, 16.09.2005
The following functions can be selected
with q:
VIP Caller Melody
Mark a directory entry as a VIP (Very
Important Person) by assigning a specific
ringer melody to it. The entry is flagged
with the Æ icon in the directory. VIP calls
are recognised by the ringer.
VIP Caller Colour
Mark a directory entry as a VIP (Very
Important Person) by assigning a specific
colour to it. The entry is displayed in this
colour in the address book and marked
with the Æ icon.
Edit Entry
Edit the number if required and press §OK§.
Edit the name if required and press §OK§.
Use Number
Edit or add to a saved number and then
dial it with c or save it as a new entry;
to do so, display the number and press:
§Menu§ ¤ Copy to Directory ¤ §OK§
Delete Entry
Delete selected entry.
Send Entry
Send a single entry to a handset
(¢ Transferring the directory to another
handset, page 32).
Delete List
Delete all directory entries.
Send List
Send the entire directory to a handset
(¢ Transferring the directory to another
handset, page 32).
Shortcut
Assign the current entry as a shortcut
to a selected key (¢ Using shortcut keys,
page 32).
32
Using shortcut keys
You can assign directory entries to the keys
Q and 2– O:
s ¤ q (select entry) ¤ §Menu§ ¤ Shortcut
¤ ~ (press the key you want to assign the
number to)
To dial, press and hold the required shortcut
key.
Transferring the directory to
another handset
You can transfer directory entries from other
handsets to your new handset – even entries
from old handsets.
Prerequisites:
u The sending and receiving handsets must
both be registered to the same base.
u The other handset and the base can send
and receive directory entries.
s ¤ s (select entry) ¤ §Menu§ (open menu)
¤ Send Entry / Send List
Select the internal number
of the receiving handset and
press §OK§.
You can transfer several individual entries
one after the other by responding to the
Entry copied. Next entry? prompt with §OK§.
A successful transfer is confirmed by a message and confirmation tone on the receiving
handset.
Please note:
u Entries with identical numbers are not
overwritten on the receiving handset.
u The transfer is cancelled if the phone
rings or if the memory of the receiving
handset is full.
u VIP melodies and colours assigned to
entries are not transferred.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / direct_charges.fm / 16.04.2010
Using the directory and lists
Copying the displayed number to
the directory
You can copy numbers displayed in a list,
e.g., the call list or redial list, to the directory.
If you have CNIP, the first 16 characters of the
transmitted name are also copied.
A number is displayed:
§Menu§ ¤ Copy to Directory
¤ Complete the entry (¢ Saving a number
in the directory, page 31).
Gigaset C300A: Message playback is interrupted during the number transfer from the
answering machine list.
Copying numbers from the
directory
In some operating situations, you can open
the directory to copy a number, for example.
Your handset need not be in idle status.
Open the address book.
Select an entry and press §OK§.
Using the redial list
The redial list contains the ten numbers last
dialled with the handset (max. 32 numbers).
If one of the numbers is in the directory, the
corresponding name is displayed.
The following functions can be selected
with q:
Use Number
(as in the directory, ¢ page 32)
Copy to Directory (¢ Saving a number in
the directory, page 31)
Delete Entry
Delete selected entry.
Delete List
Delete all entries in the redial list.
Opening lists with the
message key
Use the message key f to open the following lists:
u Network mailbox or answering machine
list (Gigaset C300A only), if your network
provider supports this function and fast
access is set for the network mailbox
(¢ page 46).
u Incoming message list (¢ page 37)
u Call list
An advisory tone sounds as soon as a new
message arrives in a list. The f key flashes
(it goes off when the key is pressed).
Depending in the type of the new entry, an
icon appears in the display while in idle status:
Icon
Manual redial
Press the key briefly.
Select entry.
Press the talk key again. The
number is dialled.
Managing entries in the redial list
Version 4, 16.09.2005
§Menu§
Press the key briefly.
Select entry.
Open menu.
New message ...
Ã
... in the answering machine list
(Gigaset C300A only) or on the network mailbox
™
... in the missed calls list
Ë
... in the SMS list
The number of new entries is displayed
under the corresponding icon.
Ã
™
Ë
11 5
33
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / direct_charges.fm / 16.04.2010
Using the directory and lists
Call list
Please note
If calls are saved in the network mailbox,
you will receive a message if the list type
has been set accordingly (see your network provider user guide).
After pressing the message key f, you can
see all lists containing messages and the
network mailbox list.
The list is displayed with the number of new
entries (1) and the number of old, read
entries (2) (example):
Calls List:
02+03
Back
OK
Select a list with q. To open, press §OK§.
Using the incoming message
list
All received SMS messages are saved in the
incoming message list (¢ page 37).
Prerequisite: Calling Line Identification
Presentation (CLIP, page 27)
The call list contains the last 30 numbers,
depending on the type of list set
u All calls
– Accepted calls
– Unanswered calls
– Calls recorded by the answering
machine (Gigaset C300A only)
u Missed calls
– Unanswered calls and
– Calls not recorded by the answering
machine (Gigaset C300A only)
In idle status, you can open the call list by
pressing the message key f.
Setting the call list type
§Menu§ ¤ Settings ¤ Telephony
¤ Calls List Type
Missed Calls / All Calls
Select and press §OK§ (³ = on).
Press and hold (idle status).
The call list entries are retained when you
change the list type.
List entry
Answering machine list
(Gigaset C300A only)
You can use the answering machine list to
listen to the messages that are on the
answering machine.
New messages are displayed at the top.
Example of list entries:
New Call
02
1234567890
28.06.10
08:34
Version 4, 16.09.2005
Back
Menu
u Status of entry
In the call list
– New Call: new missed call.
– Old Call: entry already read.
– Call recv.: call accepted.
34
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / direct_charges.fm / 16.04.2010
Using the directory and lists
In the answering machine list
– Answer M (Gigaset C300A):
the answering machine accepted
the call. A message was left.
– New Msg. (Gigaset C300A): new message on the answering machine.
– Old Msg. (Gigaset C300A): message
previously played back on the answering machine.
u Entry number
u Number or name of caller
u Call date and time (if set, ¢ page 16).
Press the talk key c to call the selected
caller back.
Use the §Menu§ display key to select the following options:
Version 4, 16.09.2005
Delete Entry
Delete selected entry.
Copy to Directory (¢ Saving a number in
the directory, page 31)
Delete List
Delete all entries in the list.
After exiting the call lists, all entries are
assigned the status "old".
35
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / sms_BRD_neutral.fm / 16.04.2010
Sending SMS (text messages)
Sending SMS
(text messages)
Your phone is delivered ready to send SMS
messages immediately.
Prerequisites:
u Calling Line Identification is enabled for
your phone line.
u Your network provider supports SMS on
the fixed line network (information on
this can be obtained from your network
provider).
u You are registered with your service provider to send and receive SMS messages.
u To receive SMS messages, you must be
registered with your service provider.
This occurs automatically when you send
your first SMS.
Please note
If your phone is connected to a PABX,
please see page 39.
§OK§
Please note
u If you are interrupted by an external
call while writing an SMS, the text is
automatically saved in the outgoing
list.
u If the memory is full, or if the SMS
function on the base is being used by
another handset, the operation is
cancelled. An appropriate message
appears in the display. Delete SMS
messages you no longer require or
send the SMS later.
Outgoing list
You can save an SMS in the outgoing list, and
edit and send it later.
Saving an SMS in the outgoing list
Writing/sending SMS
¤ You are writing an SMS (¢ page 36).
§Menu§
Press the display key.
Save Text Select and press §OK§.
Writing an SMS
Opening the outgoing list
§Menu§ ¤ SMS ¤ Write Message
Write SMS.
Please note
u For instructions on entering text and
special characters, please see
page 67.
u An SMS can be up to 610 characters.
Sending an SMS
Or:
§Menu§
Version 4, 16.09.2005
from the directory or enter
directly.
Press the display key. The SMS is
sent.
Press the talk key
Press the display key.
Send Text Select and press §OK§.
s/~
Select number with area code
(even if you are in that area)
36
§Menu§ ¤ SMS ¤ Outgoing
The first list entry is displayed, for example:
Saved
02
28.06.10
08:34
Back
Menu
Reading or deleting SMS messages
¤ Open the outgoing list and then:
Select SMS.
§Menu§ ¤ Read SMS
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / sms_BRD_neutral.fm / 16.04.2010
Sending SMS (text messages)
Select and press §OK§ to read the
SMS. Scroll through the SMS
using q.
Or delete the SMS with
§Menu§ ¤ Delete Entry ¤ §OK§.
*#Q5# 22
Press keys.
Make the first ring audible.
Q §OK§
Or:
§OK§
Mute the first ring.
Writing/changing an SMS
¤ You are reading an SMS in the outgoing
list.
§Menu§
Open menu.
You have the following options:
Write Message
Write and then send or save a new SMS.
Use text
Edit the text of the saved SMS and then
send it (¢ page 36).
Character Set
Display text in the selected character set.
Deleting the outgoing list
¤ Open the outgoing list and then:
§Menu§
Open menu.
Delete List Select, press §OK§ and confirm
with §OK§. The list is deleted.
Incoming list
The incoming list contains:
u All received SMS messages, starting with
the most recent.
u SMS messages that could not be sent due
to an error.
New SMS messages are signalled on all
Gigaset handsets by the Ë icon (on the display), the flashing message key f and an
advisory tone.
Opening the incoming list with the f
key
Press.
The incoming list is displayed with the
number of new entries (1) and the number
of old, read entries (2) (example):
Receiving an SMS
All received SMS messages are saved in the
incoming list. If this is too long or is not
transferred completely, it is split into individual messages. Since an SMS remains in the
list even after it has been read, you should
regularly delete SMS messages from the
list.
The display tells you if the SMS memory is
full.
Version 4, 16.09.2005
Activating/deactivating first ringer
muting
Each incoming SMS is signalled by a single
ring (ringer as for external calls). If you
accept the "call", the SMS is lost. To prevent
this, suppress the first ring for all external
calls.
§Menu§
Open main menu.
SMS:
Back
01+02
OK
Open list with §OK§. An entry in the list is displayed with the number, status (old or new)
and the date of receipt (example):
New
02
1234567890
28.06.10
08:34
Back
Menu
37
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / sms_BRD_neutral.fm / 16.04.2010
Sending SMS (text messages)
Opening the incoming list via the SMS
menu
§Menu§ ¤ SMS ¤ Incoming
Reading or deleting SMS messages
¤ Open the incoming list, then:
Select SMS.
§Menu§ ¤ Read SMS
Select and press §OK§ to read the
SMS. Scroll through the SMS
using q.
After you have read a new SMS,
its status changes to "old".
Or delete the SMS with
§Menu§ ¤ Delete Entry ¤ §OK§.
Changing the character set
¤ Reading an SMS
§Menu§
Press the display key.
Character Set
Text is shown in the selected character
set.
Deleting the incoming list
¤ Open the incoming list.
§Menu§
Open menu.
Delete List Select, press §OK§ and confirm
with §OK§. All new and old SMS
messages in the list are deleted.
Version 4, 16.09.2005
Replying to or forwarding SMS
messages
¤ Reading an SMS
§Menu§
Press the display key.
You have the following options:
Reply
Write and send a new SMS to the sender
(¢ page 36).
Use text
Edit the text in the SMS and return it to
the sender (¢ page 36).
Send Text
Forward the SMS to another number
(¢ page 36).
38
Copying the number to the
directory
Copying the sender's number
¤ Open the incoming list and select the
SMS (¢ page 37).
§Menu§ ¤ Copy to Directory
¤ Complete the entry (¢ page 33).
Setting SMS centres
SMS messages are exchanged between SMS
service centres operated by service providers. You must enter the SMS service centre
through which you wish to send and receive
SMS messages into your phone. You can
receive SMS messages from every SMS service centre that is entered, provided you have
registered with your service provider.
Your SMS messages are sent via the SMS centre that is entered as the active send service
centre (¢ page 38). Only one SMS service
centre can be the active send service centre
at any one time.
Your SMS messages are sent via the SMS
service centre that is entered as the active
send service centre. However, you can activate any other SMS centre as the active send
service centre to send a current message
(¢ page 38).
If no SMS service centre is entered, the
SMS menu only consists of the entry Service
Centres. Enter an SMS service centre
(¢ page 38).
Entering/changing SMS service
centres
¤ Find out about the services and special
functions offered by your service provider before you make a new application and/or before you delete pre-configured numbers.
§Menu§ ¤ SMS ¤ Service Centres
Select SMS service centre (e.g.,
SMS centre # 1) and press §OK§.
You have the following options:
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / sms_BRD_neutral.fm / 16.04.2010
Sending SMS (text messages)
Active Send Srvc. Cent.
If SMS messages are to be sent via this
SMS centre, press §OK§ to activate the SMS
centre (³ = on). If a different SMS centre
was active previously, then this will be
deactivated. For SMS centres 2 and 3, the
setting only applies to the next SMS.
SMS centre #
Enter the number of the SMS centre and
press §OK§.
If you deactivate the SMS function, you cannot send or receive any SMS messages with
your phone.
¤ Activate the SMS centre (2 or 3) as the
active send service centre.
¤ Send the SMS.
This setting only applies to the next SMS to
be sent. Thereafter, the setting returns to
SMS centre # 1.
The settings you have made for sending and
receiving SMS messages (e.g., the numbers
of the SMS service centres) and the entries in
the incoming and outgoing lists are saved
even after deactivation.
§Menu§
Open main menu.
*#Q5#23
Enter the digits.
Deactivate the SMS function.
Q §OK§
Or:
§OK§
Activate the SMS function
(default setting).
Receiving SMS messages on
a PABX
Troubleshooting SMS
problems
Sending an SMS via another SMS
service centre
u You can only receive an SMS when Calling Line Identification is forwarded
to the extension of the PABX (CLIP).
The CLIP evaluation of the SMS centre
number is completed in your Gigaset.
u Depending on your PABX, you may have
to add the access code (external line prefix) before the number of the SMS centre.
If in doubt, test your PABX, e.g., by sending an SMS to your own number: once
with and once without the access code.
u When you send SMS messages, your
sender number may be sent without your
extension number. In this case, the recipient cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base.
Version 4, 16.09.2005
Activating/deactivating SMS
function
Error codes when sending
E0 Calling Line Identification permanently
restricted (CLIR) or Calling Line Identification
not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS service centre failed; see
self-help.
39
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / sms_BRD_neutral.fm / 16.04.2010
Sending SMS (text messages)
Self-help with errors
The following table lists error situations, possible causes and advice on troubleshooting.
You cannot send messages.
1. You have not requested the CLIP service (Calling Line Identification Presentation).
¥ Ask your service provider to enable this
service.
2. SMS transmission has been interrupted (e.g.,
by a call).
¥ Re-send the SMS.
3. The network provider does not support this
feature.
4. No number or an invalid number is entered for
the SMS service centre set as the active send
service centre.
¥ Enter the number (¢ page 38).
You receive an incomplete SMS.
1. Your phone's memory is full.
¥ Delete old SMS messages (¢ page 36).
2. The service provider has not yet sent the rest
of the SMS.
The SMS is played back.
1. The "display call number" feature is not activated.
¥ Ask your service provider to activate this
function (chargeable).
2. No agreement is in place between your
mobile phone operator and your fixed line
network SMS service provider.
¥ Obtain information from your fixed line
network SMS service provider.
3. Your terminal has been recorded by your SMS
provider as having no fixed line network SMS
functionality i.e., you are not registered with
the provider.
¥ Send any SMS to automatically register
your telephone to receive SMS.
Version 4, 16.09.2005
Messages are only received during the day.
The terminal is recorded in your SMS provider's database as having no fixed line network SMS functionality i.e., you are not registered with the provider.
¥ Obtain information from your fixed line
network SMS service provider.
¥ Send any SMS to automatically register
your telephone to receive SMS.
40
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 16.04.2010
Operating the Gigaset C300A base answering machine
Operating the
Gigaset C300A base
answering machine
You can operate the answering machine via
the handset, the buttons on the base
(¢ page 5) or by remote control (from
another phone/mobile phone). You can
record your own announcements using the
handset.
Operating via the handset
The handset loudspeaker activates automatically if you receive an acoustic prompt
or message while operating. You can switch
it off with handsfree key d.
Activating/deactivating the
answering machine
§Menu§ ¤ Voice Mail ¤ Answerphone
( ³= on)
Version 4, 16.09.2005
If the message memory is full, the answering
machine cannot be activated. You will
receive an instruction to delete old messages.
When you switch the answering machine
on, the remaining memory time is
announced. If the time has not yet been set,
a corresponding announcement is made
(set time, ¢ page 16). The à icon appears
in the display.
The telephone is supplied with a prerecorded announcement. This pre-recorded
announcement is used if no personal
announcement is available.
Recording an announcement
§Menu§ ¤ Voice Mail ¤ Announcements
¤ Record Announcement
¤ Press OK, talk after tone
§OK§
Press the display key to start the
recording.
You hear the ready tone (short tone).
¤ Now speak your announcement (at least
3 secs.).
Just as if making a call via the receiver,
place the telephone against your ear and
speak into the microphone at a normal
volume.
§OK§
Press the display key to end the
recording.
Cancel recording with a or §Back§. Restart
the recording with §OK§.
After recording, the announcement is
played back for you to check.
Please note:
u Recording ends automatically, if the maximum recording time of 170 seconds is
exceeded or there is a break in speech for
more than 2 seconds.
u If you cancel the recording, the prerecorded announcement is used again.
Playing back an announcement
§Menu§ ¤ Voice Mail ¤ Announcements
¤ Play Announcement
If you have not recorded a personal
announcement, the pre-recorded
announcement is played.
41
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 16.04.2010
Operating the Gigaset C300A base answering machine
Deleting an announcement
Stopping and controlling playback
§Menu§ ¤ Voice Mail ¤ Announcements
¤ Delete Announcement
§OK§
Press the display key to confirm
the prompt.
The pre-recorded announcement is used
again after a personal announcement is
deleted.
During message playback:
Pause playback.
Press 2 again to resume.
Or
§Menu§
Stop playback.
To resume, press Continue
¤ §OK§
t or
Go to the start of the current
message.
Press twice to go back to the
previous message.
s or 3 Go to the next message.
Press twice to skip ahead two
messages.
If playback is interrupted for over a minute,
the answering machine returns to idle status.
Please note
Deleting announcements can take some
time.
Playing back messages
The date and time of each message is logged
(provided this has been set, ¢ page 16) and
displayed during the playback. If Calling Line
Identification is activated, the caller's
number or name is displayed. If the caller's
number is saved in the directory, their name
is displayed.
New messages that have not yet been
played back are indicated on the display
with an icon and number:
Ã
The message key f on the handset flashes.
Copying a phone number from a
message to the directory
During playback or pause:
§Menu§ ¤ Copy to Directory
¤ Complete the entry (¢ page 33).
Please note
Message playback can also be started via
the menu:
§Menu§ ¤ Voice Mail ¤ Play Messages
¤ Answer Machine
To listen to messages:
Version 4, 16.09.2005
Press the message key.
Answ. Mach.:
Select as required and press §OK§.
If you have new messages, playback will
start with the first new message, otherwise
with the first old message.
If the message has been saved with the date
and time, you will hear an appropriate
announcement before playback begins.
After the entry time and date have been
played back (after approx. 3 seconds), a new
message assumes the status "old".
42
Deleting messages
You can either delete all old messages
together or individually.
Deleting all old messages
During playback or pause:
§Menu§ ¤ Delete all
§OK§
Press the display key to confirm
the prompt.
Deleting individual old messages
During playback:
§Delete§
Press the display key.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 16.04.2010
Operating the Gigaset C300A base answering machine
Accepting a call from the
answering machine
You can pick up a call while the answering
machine is recording or is being operated
via remote operation:
Press the talk key.
Recording stops and you can speak to the
caller.
If 3 seconds of the call have already been
recorded when you accept it, the call will be
displayed as a new message. The f key on
the handset flashes.
You can answer the call, even if it is not signalled on the handset.
Diverting an external call to the
answering machine
You can divert an incoming external call to
the answering machine, even if it is deactivated.
Prerequisite: Sufficient memory space is
available on the answering machine.
An external call is signalled on the handset:
§Menu§ ¤ Divert to AM ¤ §OK§
The answering machine starts immediately
in answer & record mode and records the
call. The set time for ring delay (¢ page 44)
is ignored.
§End§
Press the display key to stop
two-way record.
The maximum recording time depends on
the capacity available on the answering
machine. If the memory is full, you will hear
an end tone, the recording is aborted, and
the call recorded up to that point is listed in
the answering machine list as a new message.
Activating/deactivating call
screening
While the caller is leaving a message on the
answering machine, you can listen in via the
loudspeaker on the base or handset.
Permanently activating/deactivating
call screening
§Menu§ ¤ Voice Mail ¤ Call Screening
¤ Handset / Base (³= on)
Call screening can be simultaneously activated on the base and handset.
Deactivating call screening for the
current recording
You can deactivate the function for your
own handset during the recording.
Press the end call key.
Version 4, 16.09.2005
Activating/deactivating two-way
record
You can record an external call with the
answering machine.
¤ Inform the caller that the call is being
recorded.
During the conversation:
§Menu§
Open menu.
Two-way Recording
Select and press §OK§.
Two-way record is indicated on the display
by an advisory text and is added to the
answering machine list as a new message.
43
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 16.04.2010
Operating the Gigaset C300A base answering machine
Setting the recording
parameters
The answering machine has already been
preset at the factory. Individual settings can
be adjusted using the handset.
Setting the recording time
You can set the maximum recording time of
a message: 1 Minute, 2 Minutes, 3 Minutes
or Unlimited.
§Menu§ ¤ Voice Mail ¤ Message Length
Select the recording time and
press §OK§ (³= selected).
Setting ring delay
You can set when you want the answering
machine to accept a call: Immediately,
10 sec, 18 sec, 30 sec or Auto.
§Menu§ ¤ Voice Mail ¤ Ring Delay
Select time and press §OK§
(³= selected).
Information about ring delay
Version 4, 16.09.2005
In Auto mode, the following applies for ring
delay:
u If there are no new messages, the answering machine answers a call after 18 seconds.
u If there are new messages, the answering
machine answers a call after 10 seconds.
When operating remotely(¢ page 45), you
can tell after approx. 15 seconds that there
are no new messages (otherwise the
answering machine would have already
accepted your call). There are no call charges
if you hang up now.
44
Please note:
You can configure your telephone so that
the first ring is suppressed on all calls
(¢ page 37). This means that the time
selected for the ring delay predetermines
how long the caller must wait before the
answering machine accepts the call.
Changing the language for
voice prompt and prerecorded announcement
§Menu§
Open main menu.
*#Q5#2
Enter digits and press
To set German.
Q §OK§
§OK§
To set French.
2 §OK§
To set Italian.
Resetting fast access for the
answering machine using
key 1
To access the answering machine, simply
press and hold the
key – you do not
have to select it via the menu.
The integrated answering machine has
already been preset at the factory. However,
if you have set the network mailbox for fast
access (¢ page 46), you can change this setting.
§Menu§ ¤ Voice Mail ¤ Set Key 1
Answer Machine
Select and press §OK§.
The setting for fast access applies to all registered handsets.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 16.04.2010
Operating the Gigaset C300A base answering machine
Operating when on the move
(remote operation)
You can check and activate your answering
machine from any other telephone (hotel,
pay phone etc.).
Prerequisites:
u You have set a system PIN other than
0000 (¢ page 54).
u The phone you are using for remote operation has tone dialling (DTMF) i.e., you
hear different tones when you press the
keys. Alternatively, you can use a code
transmitter (available from your mobile
phone retailer).
Activating the answering machine
¤ Phone home and let the phone ring until
you hear: "Please enter PIN".
Enter system PIN.
Your answering machine is activated. It tells
you how much capacity is left.
The messages are played.
The answering machine cannot be deactivated remotely.
Calling the answering machine and
playing messages
Version 4, 16.09.2005
Dial your own number.
While listening to your
9~
announcement, press 9 and
enter the system pin.
You are informed whether any new messages have been recorded. The messages are
now played back. You can now operate the
answering machine with the keypad.
The following keys are used for operation:
To return to the start of the current message.
Press twice to go back to the
previous message.
Stop playback. Press again to
resume.
Go to the next message.
Delete current message.
45
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG.fm / 16.04.2010
Using the network mailbox
Using the network
mailbox
The network mailbox is your provider's voice
mail feature within the network. More information is available from your provider.
You cannot use the network mailbox unless
you have requested it from your provider.
Using fast access for the
network mailbox
To access the network mailbox, simply press
and hold the
key – you do not have to
select it via the menu.
Gigaset C300: The network mailbox is preconfigured for fast access. You only need to
enter the number of the network mailbox.
§Menu§ ¤ Voice Mail ¤ Network Mailbox
(³= selected)
Enter the network mailbox
number and press §OK§.
Gigaset C300A: The integrated answering
machine is preconfigured for fast access. You
can switch to the network mailbox.
§Menu§ ¤ Voice Mail ¤ Network Mailbox
Enter the network mailbox
number and press §OK§.
¤ Set Key 1 ¤ Network Mailbox
(³= selected)
The setting for fast access applies to all
handsets.
Calling the network mailbox
Press and hold. You are connected straight to the network
mailbox.
Version 4, 16.09.2005
Please note
You can also connect to the network
mailbox via the menu:
§Menu§ ¤ Voice Mail ¤ Play Messages
¤ Network Mailbox (Gigaset C300A
only)
46
Viewing the network mailbox
message
When a message is recorded, you receive a
call from the network mailbox. If you have
requested Calling Line Identification, the
network mailbox number is displayed. If you
accept the call, the new messages are played
back. If you do not accept the call, the network mailbox number is saved in the missed
calls list and the message key flashes
(¢ page 33).
Please note
Enter the network mailbox phone
number into your directory along with
the designation "Network mailbox"; the
display and the call list will then show
this designation.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
ECO DECT
ECO DECT
You are helping to protect the environment
with your Gigaset.
Reducing energy consumption
Your telephone has a power-saving adapter
plug and uses less power.
Reducing radiation
The radiation from your telephone is
reduced automatically:
u Handset: The closer the handset is to the
base, the lower the radiation.
u Base: The radiation is reduced to virtually
zero when only one handset is registered
and the handset is placed in the base.
You can further reduce the radiation from
the handset and base by using Eco Mode:
Eco Mode
Reduces radiation from the base and handset by 80% – whether you are making a call
or not. Eco Mode reduces the range of the
base by approx. 50%. Using Eco Mode
always makes sense when a reduced range is
sufficient.
Switching off radiation
Eco Mode+
If you activate Eco Mode+, radiation (DECT
transmission power) from the base and
handset is deactivated in idle status. This is
also true when multiple handsets are used,
provided the handsets support Eco Mode+.
Eco Mode / Eco Mode+ can be activated/
deactivated independently of one another
and can also be used with multiple handsets.
Status displays
Screen icon
Ð i Ñ Ò
| (flashes)
Ð white
Ð green
¼ white
¼ green
Reception strength:
– good to poor
– no reception
Eco Mode deactivated
Eco Mode activated
Eco Mode+ activated
(displays instead of the
reception strength icon
when in idle status)
Eco Mode and Eco
Mode+ activated
Please note
u When using Eco Mode+, you can
ensure that the base is in range by
pressing and holding the talk key c.
You hear the ringtone if the base can
be reached.
u When Eco Mode+ is activated:
– Call setup is delayed by approx.
2 seconds.
– Handset standby time is reduced
by approx. 50%.
u Registering handsets that do not support Eco Mode+ causes the mode to
be deactivated on the base and all
other handsets.
u Activating Eco Mode reduces the
range of the base.
u Eco Mode / Eco Mode+ and repeater
support (¢ page 54) cancel each
other out, i.e., if you use a repeater,
you cannot use Eco Mode or Eco
Mode+.
Activate/deactivate Eco Mode /
Eco Mode+:
§Menu§ ¤ Settings ¤ Eco Mode / Eco Mode+
Version 4, 16.09.2005
§OK§
Press display key (³ = on).
47
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
Using the handset as an alarm clock
Using the handset as an
alarm clock
Prerequisite: The date and time have
already been set (¢ page 16).
Activating/deactivating the alarm
clock
§Menu§ ¤ Alarm Clock ¤ Activation (³ = on)
After you activate the alarm clock, the menu
for setting the wake up time opens automatically.
The ¼ icon and wake up time are shown on
the display.
A wake-up call is signalled on the display
(¢ page 3) and with the selected ringer volume and melody (¢ page 52). The wake-up
call sounds for 60 seconds. If no key is
pressed, the wake-up call is repeated twice
at five-minute intervals and then switched
off.
During a call, the wake-up call is only signalled by a short tone.
Setting the wake up time
§Menu§ ¤ Alarm Clock ¤ Wake up time
Enter the wake up time in hours
and minutes, then press §OK§.
Version 4, 16.09.2005
Deactivating the wake-up call/
repeating after a pause
(snooze mode)
Prerequisite: A wake-up call is sounding.
§Off§
Press the display key. The wakeup call is deactivated.
Or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 minutes. After the second repetition, the wake-up call is deactivated completely.
48
Using multiple handsets
Registering handsets
You can register up to four handsets on your
base station. Each additional handset must
be registered with the base in order for it to
work properly!
Registering the Gigaset handset
with the Gigaset C300/C300A
You must manually register the handset on
both the handset (1) and the base (2).
Once the registration process has been completed successfully, the handset returns to
idle status. The handset's internal number is
shown in the display, e.g., INT 1. If not, repeat
the procedure.
1) On the handset
§Menu§ ¤ Settings ¤ Registration
¤ Register Handset
If the handset is already registered to four
bases:
Select base, e.g., Base 3 and
press §OK§.
If required, enter the system
PIN for the base and press §OK§.
The display shows Handset is registering.
2) On the base
¤ Within 60 seconds, press and hold the
registration/paging key on the base
(¢ page 5) (approx. 3 seconds).
Registering other handsets
You can manually register other Gigaset
handsets and handsets for other devices
with GAP functionality as follows.
1) On the handset
¤ Start to register the handset as
described in its user guide.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
Using multiple handsets
2) On the base
¤ Press and hold the registration/paging
key on the base (¢ page 5) (approx. 3
sec.).
Making internal calls
Internal calls are free calls between handsets
that are registered with the same base.
Calling a specific handset
De-registering handsets
You can de-register all other registered
handsets from each of the registered
Gigaset handsets.
§Menu§ ¤ Settings ¤ Registration
¤ De-register Handset
Select the internal subscriber
you wish to de-register and
press §OK§.
(The handset you are currently
using is highlighted with <).
Enter the current system PIN
and press §OK§.
§Yes§
Press the display key.
Locating a handset (paging)
You can locate your handset using the base.
¤ Briefly press the registration/paging key
on the base (¢ page 5).
¤ All handsets will ring simultaneously
(paging), even if the ringtones are deactivated.
Ending paging
¤ Briefly press the registration/paging key
on the base or press the talk key c on
the handset.
Version 4, 16.09.2005
Changing the base
If your handset is registered to more than
one base, you can set it to a particular base
or to the base that has the best reception
(Best Base).
§Menu§ ¤ Settings ¤ Registration
¤ Select Base
Select one of the bases or Best
Base and press §OK§.
Or:
Initiate internal call.
Enter the number of the handset.
Select handset.
Press the talk key.
Calling all handsets (group call)
Or:
Press and hold.
Initiate internal call.
Press the star key.
Or
Call All
Select
Press the talk key.
All handsets are called.
Ending a call
Press the end call key.
Transferring a call to another
handset/making an internal
consultation call
You are talking to an external participant
and can call an internal participant at the
same time to forward the call or to consult.
Open the list of handsets.
The external participant hears
music on hold, if activated
(¢ page 54).
Select a handset or Call All and
press §OK§.
When the internal participant answers:
¤ If necessary, announce the external call.
Either
Press the end call key. The external call is transferred to the
other handset.
49
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
Using multiple handsets
Or
§Back§
The line is engaged with an external call.
Your screen will display information to that
effect. To listen in to the external call.
Press and hold the talk key.
You can listen in to the call. All participants
hear a signal tone. During this time, this
handset displays the Add 2nd message and
it is not possible to dial another number
from this handset.
Accepting a waiting call
Ending listening in
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). With Calling Line Identification, the caller's number or name will
appear in the display.
Press the end call key to end the
internal call.
Press the talk key to accept the
external call.
Listening in to an external call
(conference)
Prerequisite: The Listening in function must
be activated.
You are conducting an external call. An internal participant can listen in on this call and
take part in the conversation. All the participants are made aware of additional listeners
by a signal tone.
Activating/deactivating listening
in
§Menu§ ¤ Settings ¤ Telephony
¤ Listening in
Press §OK§ to activate/deactivate the function
(³ = on).
Version 4, 16.09.2005
Internal listening in
Press the display key. You are
reconnected with the external
participant.
When transferring a call, you can also press
the end call key a before the internal participant answers.
Then, if the internal participant does not
answer or the line is busy, the call will automatically return to you.
50
Press the end call key.
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has "listened in" remains connected to the external
participant.
Changing the name of a
handset
The names "INT 1", "INT 2" etc. are assigned
automatically upon registration. You can
change these names. The name must be no
more than 10 characters. The changed name
is displayed in every handset's list.
Open the list of handsets. Your
own handset is indicated by <.
Select handset.
§Menu§
Open menu.
Rename
Enter name.
§OK§
Press the display key.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
Handset settings
Handset settings
Your handset is preset, but you can change
the settings to suit your individual requirements.
Quick access to numbers
You can assign a number from the directory
to each of the digit keys Q and 2 to O.
The number is then dialled by simply pressing a key.
Changing the display
language
You can view the display texts in different
languages.
§Menu§ ¤ Settings ¤ Language
The current language is indicated by a ³.
Select a language and press §OK§.
If you accidentally choose a language you do
not understand:
§Menu§ ¤ s s s ¤ §OK§ ¤ s s s ¤ §OK§
Select the correct language and
press §OK§.
Version 4, 16.09.2005
Setting the display/
screensaver
You have a choice of four colour schemes
and several different contrasts. You can also
set a screensaver and the backlight.
§Menu§ ¤ Settings ¤ Display
You have the following options:
Screensaver
You can set a picture or the time to be displayed as a screensaver when the handset is in idle status. This will replace the
idle status display. You can choose
between No Screensaver, Digital Clock
and Picture.
The screensaver is not displayed in certain situations, e.g., during a call or if the
handset is de-registered.
To show the display in idle status, briefly
press end call key a.
Colour Schemes
You can set the display to be shown in
various colour combinations. Four colour
schemes are available.
Contrast
Nine contrast settings are available.
Backlight
Depending on whether or not the handset is in the charger, you can activate or
deactivate the backlight (³= on). If it is
activated, the display is permanently
dimmed.
When the display backlight is switched
off, any key press will activate the backlight and perform the relevant key function.
Please note
If the backlight is turned on outside
the charging cradle, the standby time
for the handset is considerably
reduced!
Activating/deactivating auto
answer
If this function is activated, you can simply
lift the handset out of the charger without
having to press the talk key c when you
receive a call.
§Menu§ ¤ Settings ¤ Telephony
¤ Auto Answer
§OK§
Press display key (³= on).
51
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
Handset settings
Changing the handsfree/
earpiece volume
You can set the volume for handsfree mode
and earpiece mode to five different levels.
In idle status:
t ¤ Call Volume
Earpiece Volume / Handsfree Volume
Select and press §OK§.
Set the volume
(e.g., volume 3 = ‰ ).
§OK§
Press the display key to save the
setting.
During a conversation via the earpiece or in
handsfree mode:
Press the control key to open
the menu for setting the volume. Set the earpiece or handsfree volume by pressing q.
The setting will automatically be saved after
approximately 3 seconds, if not then press
the display key §OK§.
Please note
You can also set the call volume using the
menu (¢ page 26).
Changing ringtones
Version 4, 16.09.2005
u Volume:
You can choose between five volumes
(e.g., volume 2 = ˆ) and the "crescendo" ring (volume increases with
each ring = ‡).
u Ringtones:
You can select a ringer from a list of preloaded melodies.
You can set different ringtones for the following functions:
u Internal calls
u External calls:
u Alarm clock
52
Setting the ringer volume
The ringer volume is the same for all types of
ring.
In idle status:
t ¤ Ringer Volume
Set the volume.
§OK§
Press the display key to save the
setting.
Please note
You can also adjust the ringer volume via
the menu (¢ page 26).
Setting the ringer melody
Set different ringer melodies for external
calls, internal calls and the alarm clock.
For internal calls and the alarm clock
In idle status:
t ¤ Ringtones (Handset)
Internal Calls / Alarm Clock
Select and press §OK§.
Select melody and press §OK§
(³= selected).
For external calls:
In idle status:
t ¤ Ringtones (Handset)
External Calls
Select and press §OK§.
q can be used for the following:
Melodies
You can set the ringer melody as
described above.
Time Control
You can specify a time period when you
do not want the telephone to signal
external calls e.g., during the night.
Activation is switched on or off by pressing §OK§ (³= activated)
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
Handset settings
Settings
Ringer off from: / Ringer off until:
Enter time in 4-digit format.
Please note
During this period, you will continue to receive calls from numbers to which you have assigned a
personalised melody in the directory (VIP).
Anonymous Calls Silent
You can set your phone not to ring for
calls where Calling Line Identification has
been restricted. The call will only be signalled on the display.
Switch the Anonymous Calls Silent
function on or off by pressing §OK§
(³= activated).
Please note
You can also set the ringer melodies via
the menu (¢ page 26).
Activating/deactivating the ringer
You can:
u Permanently deactivate the ringer in idle
status or when receiving a call
u Deactivate the ringer for the current call
only.
The ringer cannot be re-activated while a
call is in progress.
Deactivating the ringer permanently
Press and hold the star key.
The ó icon appears in the display.
Reactivating the ringer
Activating deactivating advisory
tones/battery low tone
Your handset uses advisory tones to tell you
about different activities and statuses. These
can be activated and deactivated independently of each other:
u Advisory Tones
– Confirmation tone: at the end of an
entry/setting and when an SMS or a
new entry arrives in the answering
machine list or in the call list
– Error tone: when you make an incorrect entry
– Menu end tone: when scrolling to the
end of a menu
– Key click: every key press is confirmed.
u Battery Low
The battery requires charging.
t ¤ Ringtones (Handset)
Advisory Tones / Battery Low
Select and press §OK§ to activate
or deactivate (³= activated).
Restoring the handset
default settings
You can reset individual settings and
changes that you have made.
The following settings are not affected by a
reset:
u Registration of the handset to the base
u Date & time
u Entries in the directory, call lists, SMS lists
§Menu§ ¤ Settings ¤ System ¤ Reset Handset
§Yes§
Confirm prompt.
Press and hold the star key.
Deactivating the ringer for the
current call
Version 4, 16.09.2005
§Menu§ ¤ Silent ¤ §OK§
53
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
Base station settings
Base station settings
The base settings are carried out using a registered Gigaset handset.
Changing ringtones
u Volume:
You can choose between five volumes
and the "crescendo" ring (¢ page 52).
Select "0" to deactivate the base ringer.
u Ringtones:
You can set a ringer melody for external
calls (¢ page 52).
u Time control:
You can specify when the base should
not ring (e.g., during the night).
§Menu§ ¤ Settings ¤ Audio Settings
¤ Ringtones (Base) ¤ Ringer Volume /
Ringer Melody / Time Control
For more information on adjusting the settings, see page 52.
Activating/deactivating
music on hold
§Menu§ ¤ Settings ¤ Telephony
¤ Music on hold
Press §OK§ to activate or deactivate music on
hold (³= on).
Activating repeater support
Version 4, 16.09.2005
With a repeater, you can increase the range
and signal strength of your base. You will
need to activate repeater mode. This will terminate any calls that are in progress at the
time.
Prerequisite: A repeater is registered.
§Menu§ ¤ Settings ¤ System
¤ Repeater Mode
Press §OK§ to activate/deactivate repeater
mode (³ = activated).
54
After activating or deactivating the
repeater, switch your handset off and
on again (¢ page 22).
Please note
u Eco Mode / Eco Mode+ (¢ page 47)
and repeater support cancel each
other out, i.e., you cannot use Eco
Mode and Eco Mode+ when using a
repeater.
u The default encrypted transmission
setting is deactivated when a
repeater is activated.
Protecting against
unauthorised access
Protect the system settings of the base
station with a PIN known only to yourself.
The system PIN must be entered when,
for example, registering/de-registering a
handset to/from the base or when restoring
the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only by you.
Gigaset C300A: Setting a system PIN enables
remote operation of the answering machine
(¢ page 45).
§Menu§ ¤ Settings ¤ System ¤ System PIN
Enter the current system PIN
and press §OK§.
Enter your new system PIN and
press §OK§.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 16.04.2010
Base station settings
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to 0000.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the default settings.
Resetting the base to the
default settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode / Eco Mode+ is deactivated
u The system PIN is not reset
§Menu§ ¤ Settings ¤ System ¤ Base Reset
Enter the system PIN and
press §OK§.
§Yes§
Press the display key.
Please note
Version 4, 16.09.2005
The answering machine is ready for use
approx. 15 seconds after the base has
been connected or reset.
55
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / pabx.fm / 16.04.2010
Connecting the base to the PABX
Connecting the base to
the PABX
0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms;
6 = 600 ms; 7 = 800 ms
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Setting pauses
Dialling mode and Flash
Changing the dialling mode
The following dialling modes can be
selected:
u Tone dialling (DTMF)
u Pulse dialling (PD).
§Menu§
Open main menu.
*#Q5#
Press keys.
§OK§
Pulse dialling mode (DP).
Or:
~ Q §OK§
Tone dialling (DTMF).
Please note
Tone dialling (DTMF) is now the most
common dialling mode. Pulse dialling
mode (PD) is only used for a few old
PABXs.
Version 4, 16.09.2005
Setting recall
Your phone is preset for operation on the
main connection. For operation on a PABX,
you may have to change this value. Please
refer to the user guide for your PABX.
§Menu§
Open main menu.
*#Q5# 2
Press keys.
Enter digits for the recall time
and press §OK§.
56
Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key c
and sending the number.
§Menu§
Open main menu.
*#Q5# O
Press keys.
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press §OK§.
Changing the pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
§Menu§
Open main menu.
*#Q5# 4
Press keys.
Enter a digit for the length of the
pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press §OK§.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a connection (e.g., to listen to the network mailbox), you must switch to tone dialling for the
call.
Prerequisite: You are conducting a call or
have already dialled an external number.
Press the star key.
After the call ends, pulse dialling is automatically reactivated.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
Questions and answers
You cannot hear a ringer/dialling tone from the
fixed line network.
If you have any queries about the use of
your telephone, visit our website at
www.gigaset.com/customercare
for assistance 24/7.
The table below contains a list of common
problems and possible solutions.
The phone cord supplied has not been used or
has been replaced by a new cord with the wrong
pin connections.
¥ Please always use the phone cord supplied or
ensure that the pin connections are correct
when purchasing from a retailer (¢ page 67).
The display is blank.
1. The handset is not switched on.
¥ Press and hold the end call key a.
2. The battery is empty.
¥ Charge the battery or replace it
(¢ page 13).
"Base" flashes on the display.
Each incoming call resets the date/time incorrectly.
The date and time are sent via e.g., your network
provider, a router or PABXs during calling line display. This data may be incorrect.
¥ Set the date/time correctly e.g. on the router
or PABX.
¥ Do not automatically copy the date/time
¢ page 16.
1. The handset is outside the range of the base.
¥ Move the handset closer to the base.
The connection always terminates after
approx. 30 seconds.
2. The base's range is reduced because Eco
Mode is activated.
¥ Deactivate Eco Mode (¢ page 47) or
reduce the distance between the handset
and the base.
Repeater activated/deactivated (¢ page 54).
¥ Activate/deactivate the handset (¢ page 22).
Error tone sounds after system PIN prompt.
3. The base is not switched on.
¥ Check the base power adapter
(¢ page 11).
Forgotten the system PIN.
4. Handset has not been registered with the
base or has been de-registered.
¥ Register the handset (¢ page 48).
Handset does not ring.
1. The ringer is deactivated.
¥ Activate the ringer (¢ page 53).
3. The phone only rings if the phone number
has been transferred.
¥ Activate the ringer for unknown calls
(¢ page 53).
You have entered the wrong system PIN.
¥ Reset the system PIN to 0000 (¢ page 55).
¥ Reset the system PIN to 0000 (¢ page 55).
The other party cannot hear you.
You pressed the mute key v during a call.
The handset is "muted".
¥ Unmute the microphone (¢ page 29).
The number of the caller is not displayed
despite CLIP.
Calling Line Identification is not enabled.
¥ The caller should ask the network provider to
enable Calling Line Identification (CLI).
Refer to the notes on calling line display
(¢ page 28).
You hear an error tone when keying an input.
Action has failed/invalid input.
¥ Repeat the process.
Watch the display and refer to the user guide
if necessary.
You cannot listen to messages on the network
mailbox.
Version 4, 16.09.2005
Your PABX is set for pulse dialling.
¥ Set your PABX to tone dialling.
57
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
Gigaset C300A only:
No time is specified for a message in the call list.
Date and time have not been set.
¥ Set the date/time (¢ page 16).
The answering machine announces, "PIN is
incorrect" during remote operation.
1. You have entered the wrong system PIN.
¥ Enter the system PIN again.
2. The system PIN is still set to 0000.
¥ Set the system PIN to something other
than 0000 (¢ page 54).
The answering machine is not recording any
messages/has switched to answer only mode.
Its memory is full.
¥ Delete old messages.
¥ Play back new messages and delete.
Exclusion of liability
Version 4, 16.09.2005
Some displays may contain pixels (picture elements), which remain activated or
deactivated. As a pixel is made up of three
sub-pixels (red, green, blue), it is possible
that pixel colours may vary.
This is completely normal and does not
indicate an error.
58
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
FCC / ACTA Information
Industry Canada Certification
Operation is subject to the following two conditions (1) this device may not cause interference,
and (2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
NOTICE: The Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications
network, protective, operational and safety
requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the
equipment will operate to the user’s satisfaction.
Before installing this equipment, users should
ensure that it is permissible to be connected to
the facilities of the local telecommunications
company. The equipment must also be installed
using an acceptable method of connection. The
customer should be aware that compliance with
the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user
to this equipment, or equipment malfunctions,
may give the telecommunications company cause
to request the user to disconnect the equipment.
Users should ensure for their own protection that
the electrical ground connections of the power
utility, telephone lines and internal metallic water
pipe system, if present, are connected together.
This precaution may be particularly important in
rural areas
NOTE: Users should not attempt to make such
connections themselves, but should contact the
appropriate electric inspection authority,
or electrician, as appropriate.
This product meets the applicable Industry
Canada technical specifications.
Version 4, 16.09.2005
The Ringer Equivalence Number is an indication of
the maximum number of devices allowed to be
connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement
that the sum of the RENs of all devices does not
exceed five.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC / ACTA Information
Warning: Changes or modifications to this unit
not expressly approved by Gigaset Communications USA LLC could void the FCC authority to
operate the equipment. This includes the addition
of any external antenna device.
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
On the bottom of the base station is a label that
contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the
telephone company.
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided
with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of
devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result
in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To be certain of
the number of devices that may be connected to
a line, as determined by the total RENs, contact
the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
A copy of the supplier's Declaration of Conformity
(SDoC) is available at this Internet address:
www.gigaset.com/docs.
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance, that temporary discontinuance of service may be required. But if advance notice isn’t
practical, the telephone company will notify the
customer as soon as possible. Also, you will be
advised of your right to file a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures
that could affect the operation of the equipment.
If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted
service. If you experience trouble with this telephone system, disconnect it from the network
59
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
Version 4, 16.09.2005
FCC / ACTA Information
until the problem has been corrected or until you
are sure that the equipment is not malfunctioning.
If trouble is experienced with this equipment, for
repair or warranty information, please contact
Support at 1-866 247-8758. If the equipment is
causing harm to the telephone network, the telephone company may request that you disconnect
the equipment until the problem is resolved. This
equipment is of a type that is not intended to be
repaired by the Customer (user).
This telephone system may not be used on coin
service provided by the telephone company. Connection to party line service is subject to state tariffs. Contact the state public utility commission,
public service commission or corporation commission for information. Privacy of communications may not be ensured when using this phone.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the
installation of this equipment does not disable
your alarm equipment. If you have questions
about what will disable alarm equipment, consult
your telephone company or a qualified installer.
This telephone system equipment has been
tested and found to comply with the limits for
Class B digital device, pursuant to Part 15 of the
FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation. Some cordless telephones
operate at frequencies that may cause interference to nearby TV’s and VCR’s; to minimize or prevent such interference, the system base should
not be placed near or on top of a TV or VCR; and, if
interference is experienced, moving the base farther away from the TV or VCR will often reduce or
eliminate the interference.
However, there is no guarantee that interference
will not occur in a particular installation. If this telephone system does cause harmful interference
to radio or television reception, which can be
determined by turning the system off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the base station and receiver.
3. Connect the base station into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio TV
technician for help.
60
Notice for Direct Inward Dialing
("DID")
ALLOWING THIS EQUIPMENT TO BE OPERATED IN
SUCH A MANNER AS TO NOT PROVIDE FOR
PROPER ANSWER SUPERVISION IS A VIOLATION
OF PART 68 OF THE FCC‘S RULES.
Notice to Hearing Aid Wearers:
This phone system is compatible with inductively
coupled hearing aids.
Power Outage:
In the event of a power outage, your cordless
telephone will not operate. The cordless telephone requires electricity for operation. You
should have a telephone that does not require
electricity available for use during power outages.
Notice:
The installation of the base unit should allow
at least 8 inches between the base and persons to
be in compliance with FCC RF exposure guidelines.
For body worn operation, the portable part (handset) has been tested and meets FCC RF exposure
guidelines. Use with an accessory that contains
metal parts may not ensure compliance with FCC
RF exposure guidelines.
Notice to telephone company service:
If you need service from your telephone company,
please provide them with the information
– Facility interface Code (FIC)
– Service Order Code (SOC)
– Universal Service Order Code (USOC)
as indicated on the label on the bottom side of the
base station.
Safety precautions
Before using your telephone equipment, basic
safety instructions should always be followed to
reduce the risk of fire, electric shock and injury to
persons.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the product.
3. Unplug this product from the wall telephone
jack and power outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use damp
cloth for cleaning.
4. Do not use this product near water, for example,
near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming
pool.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
Version 4, 16.09.2005
FCC / ACTA Information
5. Place this product securely on a stable surface.
Serious damage and/or injury may result if the
unit falls.
6. Slots or openings in the cabinet and the back
and bottom are provided for ventilation, to protect it from overheating. These openings must not
be blocked or covered. This product should never
be placed near or over a radiator or heat register,
or in a place where proper ventilation is not provided.
7. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of AC line
power to your home, consult your dealer or local
power company.
8. Do not place objects on the power cord. Install
the unit where no one can step or trip on the cord.
9. Do not overload wall outlets and extension
cords as this can result in the risk of fire or electric
shock.
10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could
result in the risk of fire or electric shock. Never spill
liquid of any kind on this product.
11. To reduce the risk of electric shock or burns, do
not disassemble this product. Take it to a qualified
service center when service is required. Opening
or removing covers may expose you to dangerous
voltages, dangerous electrical current or other
risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
12. Unplug the product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a.) When the power cord is damaged or frayed.
b.) If liquid has been spilled into the product.
c.) If the product has been exposed to rain or
water.
d.) If the product does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating
instructions because improper adjustment of
other controls may result in damage and may
require extensive work by a qualified technician to
restore the product to normal operation.
e.) If the product has been dropped or physically
has been damaged.
f.) If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless
type) during a thunderstorm. There may be a
remote risk of electrical shock from lightning.
Therefore we suggest a surge arrestor.
14. Do not use the telephone to report a gas leak
in the vicinity of the leak.
15. Emergency/911 numbers may not be dialed if
the keypad is locked.
16. Minimum No. 26 AWG telecommunication line
cord must be used with this phone.
BATTERY SAFETY PRECAUTIONS
To reduce the risk of fire, injury or electric shock,
and to properly dispose of batteries, please read
and understand the following instructions.
CONTAINS NICKEL METAL HYDRIDE BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT DISPOSE OF IN MUNICIPAL WASTE.
1. Only use the batteries specified for use with this
product.
2. DO NOT USE NICKEL CADMIUM OR LITHIUM
BATTERIES, or mix batteries of different sizes or
from different manufacturers in this product. DO
NOT USE NONRECHARGEABLE BATTERIES.
3. Do not dispose of the batteries in a fire; the cells
may explode. Do not expose batteries to water.
Check with local codes for special disposal instructions.
4. Do not open or mutilate the batteries. Released
electrolyte is corrosive and may cause damage to
the eyes or skin. The electrolyte may be toxic if
swallowed.
5. Exercise care in handling the batteries in order
not to short the batteries with conducting materials such as rings, bracelets, and keys. The batteries
or conducting material may overheat and cause
burns or fire.
6. Charge the batteries provided with, or identified for use with, this product only in accordance
with the instructions and limitations specified in
the user’s manual. Do not attempt to charge the
batteries with any means other than that specified
in the users manual.
7. Periodically clean the charge contacts on both
the charger and handset.
61
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
FCC / ACTA Information
Service (Customer Care)
Customer Care Warranty for Cordless Products
To obtain Customer Care Warranty service,
product operation information, or for problem resolution, call:
Toll Free: 1-866 247-8758
End-user limited warranty
This product is covered by a one year limited warranty. Any repair replacement or warranty service,
and all questions about this product should be
directed to: 1-866 247-8758.
This limited, non-transferable warranty is provided to the original buyer/end-consumer ("you")
for systems, handsets and accessories (collectively, "Product") provided by Gigaset Communications USA LLC or Gigaset Communications Canada Inc. (collectively "Gigaset NAM"). Gigaset NAM
warrants to you that at the date of purchase, the
Product is free of defects in workmanship and
materials and the software included in the Product will perform in substantial compliance to its
program specifications.
1. WARRANTY PERIOD
The Product warranty period is one (1) year from
the original date of purchase by you. Proof of purchase (e.g., sales slip or invoice) must be provided
with any Product returned during the warranty
period. Batteries supplied with the Products are
warranted to be free from defects at the time of
purchase only.
2. EXCLUSIVE REMEDY
Gigaset NAM's entire liability and your exclusive
remedy if the Product is defective in materials or
workmanship during the warranty period and is
returned shall be that the Product will be repaired
or replaced as set forth in Section 4 below. Reconditioned replacement components, parts or materials may be used in the replacement or repair.
Data in the memory of the Product may be lost
during repair.
Version 4, 16.09.2005
3. THIS LIMITED WARRANTY DOES NOT
COVER AND IS VOID WITH RESPECT
TO THE FOLLOWING:
– Cosmetic damage, physical damage to the surface of the Product, including, without limitation, breakage, cracks, dents, scratches or
adhesive marks on the LCD screen or outside
casing of the Product.
62
– Products which have been repaired, maintained or modified (including the antenna) by
anyone other than Gigaset NAM or a Gigaset
NAM-approved repair facility, or that have
been improperly installed.
– Cost of installation, removal or reinstallation.
– Damage due to any telephone, electronic,
hardware or software program, network, Internet or computer malfunctions, failures, or difficulties of any kind, including without limitation, server failure or incomplete, incorrect,
garbled or delayed computer transmissions.
– Equipment and components not manufactured, supplied or authorized by Gigaset NAM.
– Modification of the Product's components, or
operation of the Product in an unsuitable environment or in a manner for which it is not
intended, including but not limited to failures
or defects caused by misuse, abuse, accidents,
physical damage, abnormal operation,
improper handling or storage, neglect, alterations, unauthorized installation, removal or
repairs, failure to follow instructions, problems
caused by the carrier's network coverage,
exposure to fire, water or excessive moisture or
dampness, floods, or extreme changes in climate or temperature, acts of God, riots, acts of
terrorism, spills of food or liquids, viruses or
other software flaws introduced into the Product or other acts which are not the fault of
Gigaset NAM and which the Product is not
specified to tolerate, including damage caused
by mishandling or blown fuses.
– Products which have had warranty stickers,
electronic serial number and/or serial number
label removed, altered, rendered illegible or
fraudulently applied to other equipment.
– Signal reception problems (unless caused by
defect in material or workmanship in the Product).
– Products operated outside published maximum ratings.
– Performance of the Products when used in
combination with other products or equipment not manufactured, supplied or authorized by Gigaset NAM.
– Consumables (such as batteries and fuses).
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
FCC / ACTA Information
– Payments for labor or service to representatives or service centers not authorized to perform product maintenance by Gigaset NAM.
– Loss of data.
– Testing and examination discloses that the
alleged defect or malfunction in the Product
does not exist.
This warranty does not cover customer education,
instruction, installation or removal, set up adjustments, problems related to service(s) provided by
a carrier or other service provider, and/or signal
reception problems. Gigaset NAM shall not be
responsible for software, firmware, information, or
memory data contained in, stored on, or integrated with any Products returned for repair,
whether under warranty or not. This warranty is
valid only in the country in which it is purchased
(i.e., the United States of America or Canada
respectively, but not both).
USE WITH ACCESSORIES NOT SUPPLIED BY
GIGASET NAM OR NOT OTHERWISE EXPRESSLY
AUTHORIZED BY GIGASET NAM MAY VOID
WARRANTY.
4. WARRANTY CLAIM PROCEDURE
All warranty claims must be made by notifying
Gigaset NAM prior to the expiration of the warranty period. Gigaset NAM's obligation to provide
warranty support shall not extend past the end of
the warranty period, except that any product
repaired or replaced during the warranty period
shall continue to be warranted for the balance of
such warranty period or thirty (30) days, whichever is greater.
Support service will be provided for you by
accessing the toll free customer service number:
1-866 247-8758
5. LIMITATION OF WARRANTY
Gigaset NAM makes no warranty or representation that the software in the Products will meet
your requirements or will work in combination
with any hardware or applications software products provided by third parties, that the operation
of the software will be uninterrupted or error free,
or that all defects in the software products will be
corrected.
Version 4, 16.09.2005
6. LIMITATION ON REMEDIES; NO
CONSEQUENTIAL OR OTHER
DAMAGES
Your exclusive remedy for any breach of this limited warranty is as set forth above. Except for any
refund elected by Gigaset NAM, YOU ARE NOT
ENTITLED TO ANY DAMAGES, INCLUDING BUT
NOT LIMITED TO CONSEQUENTIAL DAMAGES,
if the Product does not meet the limited warranty
, and, to the maximum extent allowed by applicable law, even if any remedy fails of its essential
purpose. The terms below ("Exclusion of Incidental, Consequential and Certain Other Damages")
are also incorporated into this limited warranty .
Some states/jurisdictions/provinces do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This limited warranty gives you specific legal rights. You may have
others which vary from state/jurisdiction/province to state/jurisdiction/province.
7. DISCLAIMER OF WARRANTIES
GIGASET NAM AND ITS SUPPLIERS PROVIDE THE
PRODUCT AND SUPPORT SERVICES (IF ANY) AS IS
AND WITH ALL FAULTS. THE LIMITED WARRANTY
IS IN LIEU OF ANY OTHER EXPRESS WARRANTIES
(IF ANY) CREATED BY ANY DOCUMENTATION OR
PACKAGING EXCEPT FOR THE LIMITED WARRANTY, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IS IN LIEU OF ANY
IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, OF ACCURACY OR COMPLETENESS OR RESPONSES, OF RESULTS, OF
WORKMANLIKE EFFORT, OF LACK OF VIRUSES
AND OF LACK OF NEGLIGENCE, ALL WITH REGARD
TO THE PRODUCT, AND THE PROVISION OF OR
FAILURE TO PROVIDE SUPPORT SERVICES. ALSO,
THERE IS NO WARRANTY OR CONDITION OF TITLE,
QUIET ENJOYMENT, QUIET POSSESSION, OR CORRESPONDENCE TO DESCRIPTION OR NONINFRINGEMENT WITH REGARD TO THE PRODUCT.
Some states/jurisdictions/provinces do not allow
limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential damages, so the above exclusions or
limitations may not apply to you. If an implied
warranty or condition is created by your state/
province and federal or state/provincial law prohibits disclaimer of it, you also have an implied
warranty or condition, BUT ONLY AS TO DEFECTS
DISCOVERED DURING THE PERIOD OF THIS LIMITED WARRANTY (ONE YEAR). AS TO ANY DEFECTS
DISCOVERED AFTER THE ONE YEAR PERIOD,
THERE IS NO WARRANTY OR CONDITION OF ANY
KIND. This limited warranty gives you specific legal
rights, and you may also have other rights which
vary from state to state/province to province. In
no event shall Gigaset NAM's liability exceed the
cost of repairing or replacing defective Products
as provided herein, and any such liabilities will terminate upon expiration of the warranty period.
63
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
FCC / ACTA Information
Any supplements or updates to the Product or the
software in the Product, including without limitation, any (if any) software fixes or upgrades or bug
fixes provided to you after the expiration of the
one year limited warranty period are not covered
by any warranty or condition, express, implied or
statutory.
8. EXCLUSION OF INCIDENTAL,
CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL GIGASET NAM,
SELLER OR THEIR SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT
NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS
OR CONFIDENTIAL OR OTHER INFORMATION, FOR
BUSINESS INTERRUPTION, FOR PERSONAL INJURY,
FOR LOSS OF PRIVACY, FOR FAILURE TO MEET ANY
DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY
OTHER PECUNIARY OR OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED
TO THE USE OF OR INABILITY TO USE THE PRODUCT, THE PROVISION OF OR FAILURE TO PROVIDE
SUPPORT SERVICES, OR OTHERWISE UNDER OR IN
CONNECTION WITH ANY PROVISION OF THIS LIMITED WARRANTY, EVEN IN THE EVENT OF THE
FAULT, TORT (INCLUDING NEGLIGENCE), STRICT
LIABILITY, BREACH OF CONTRACT OR BREACH OF
WARRANTY OF GIGASET NAM OR SELLER OR ANY
SUPPLIER, AND EVEN IF GIGASET NAM OR SELLER
OR ANY SUPPLIER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. REPAIR OR
REPLACEMENT, AS PROVIDED UNDER THE WARRANTY, IS YOUR SOLE AND EXCLUSIVE REMEDY
FOR BREACH OF THE LIMITED WARRANTY.
Version 4, 16.09.2005
9. LIMITATION OF LIABILITY AND
REMEDIES
NOTWITHSTANDING ANY DAMAGES THAT YOU
MIGHT INCUR FOR ANY REASON WHATSOEVER
(INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL DIRECT OR
GENERAL DAMAGES), THE ENTIRE LIABILITY OF
GIGASET NAM, SELLER AND ANY OF THEIR SUPPLIERS UNDER ANY PROVISION OF THIS LIMITED
WARRANTY AND YOUR EXCLUSIVE REMEDY FOR
ALL OF THE FOREGOING (EXCEPT FOR ANY REMEDY OF REPAIR OR REPLACEMENT ELECTED BY
GIGASET NAM OR SELLER OR SUPPLIER WITH
RESPECT TO ANY BREACH OF THE LIMITED WARRANTY) SHALL BE LIMITED TO THE GREATER OF
THE AMOUNT ACTUALLY PAID BY YOU FOR THE
PRODUCT OR FIVE DOLLARS ($5.00 USD/CAN).
64
THE FOREGOING LIMITATIONS, EXCLUSIONS AND
DISCLAIMERS SHALL APPLY TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF
ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.
10. GOVERNING LAW
If this Product was purchased in the United States
of America this limited warranty will be governed
by the laws of Texas, and exclude the United
Nations Convention on Contracts for the International Sale of Goods. If this Product was purchased
in Canada this limited warranty will be governed
by the laws of the Province of Ontario and the federal laws of Canada applicable therein, and
exclude the United Nations Convention on Contracts for the
International Sale of Goods.
If you want to learn more about Gigaset Service or
for Support on your Gigaset phone, visit our web
site at http://www.gigaset.com or please call
1-866 247-8758.
Issued by
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
Manufactured by Gigaset Communications GmbH
under trademark license of Siemens AG.
© Gigaset Communications GmbH 2010
All rights reserved.
Subject to availability. Rights of modifications
reserved.
Product attributes subject to change.
We reserve the right, to make changes without
notice in equipment design and/or components.
Part Number: A31008-M2203-R301-1-3S19
© Copyright 2010.
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
Protecting our environment
Protecting our
environment
Ecological energy consumption
Our environmental mission
statement
Disposal
We, Gigaset Communications GmbH, bear
social responsibility and are actively committed to a better world. Our ideas, technologies and actions serve people, society and
the environment. The aim of our global
activity is to secure sustainable life resources
for humanity. We are committed to a responsibility for our products that comprises their
entire life cycle. The environmental impact
of products, including their manufacture,
procurement, distribution, use, service and
disposal, are already evaluated during product and process design.
Further information on environmentally
friendly products and processes is available
on the Internet at www.gigaset.com.
Environmental management
system
Version 4, 16.09.2005
Gigaset Communications
GmbH is certified pursuant
to the international standards EN 14001 and
ISO 9001.
ISO 14001 (Environment): certified since
September 2007 by TüV SÜD Management
Service GmbH.
ISO 9001 (Quality): certified since 17/02/
1994 by TüV Süd Management Service
GmbH.
The use of ECO DECT (¢ page 47) saves
energy and makes an active contribution
towards protecting the environment.
Batteries should not be disposed of in general household waste. Observe the local
waste disposal regulations, details of which
can be obtained from your local authority.
All electrical and electronic equipment must
be disposed of separately from general
household waste using the sites designated
by local authorities.
If a product displays this
symbol of a crossed-out
rubbish bin, the product is
subject to European Directive 2002/96/EC.
The appropriate disposal
and separate collection of
used equipment serve to prevent potential
harm to the environment and to health.
They are a prerequisite for the re-use and
recycling of used electrical and electronic
equipment.
For further information on disposing of your
used equipment, please contact your local
authority or your refuse collection service.
65
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
Appendix
Appendix
Specifications
Caring for your telephone
Wipe the unit with a damp cloth or an antistatic cloth. Do not use solvents or microfibre cloths.
Never use a dry cloth. This can cause static.
Contact with liquid
If the handset should come into contact with
liquid:
1. Switch the handset off and remove the
batteries immediately.
2. Allow the liquid to drain from the handset.
3. Pat all parts dry, then place the handset
with the battery compartment open and
the keypad facing down in a dry, warm
place for at least 72 hours (not in a microwave, oven etc.).
4. Do not switch on the handset again until it is completely dry.
When it has fully dried out, you will usually
be able to use it again.
Batteries
Technology:
Nickel-metal-hydride (NiMH)
Size:
AAA (Micro, HR03)
Voltage:
1.2 V
Capacity: 550 - 1000 mAh
The device is supplied with two approved
batteries.
Handset operating times/charging
times
This Gigaset can charge batteries up to a
capacity of 1000 mAh. The use of special
high-performance batteries or batteries
with high capacities is not recommended for
cordless phones.
The operating time of your Gigaset depends
on the capacity and age of the batteries and
the way they are used. (All times are maximum possible times).
Capacity (mAh) approx.
550
700
800 1000
Standby time (hours) * 255/ 295/ 340/ 420/
89 103 118 146
Talktime (hours)
14
16
19
23
- Without Eco Mode+
- With Eco Mode+
120
80
140
95
160
110
195
135
Charging time in base
(hours)
8.5
10
5.5
6.5
7.5
Operating time for
1.5 hrs of calls per day
(hours) **
Charging time in
charger (hours)
Version 4, 16.09.2005
*) Without/with display backlight
**) Without display backlight
(Backlight ¢ page 51)
Due to the constant progression in battery
development, the list of recommended
batteries in the FAQ section of the Gigaset
Customer Care pages is regularly updated:
www.gigaset.com/customercare
66
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
Appendix
Pin connections on the telephone
jack
Base power consumption
In standby mode*
C300
C300A
approx.
0.7 W
approx.
0.7 W
Base in standby mode ** < 0.5 W
< 0.5 W
During a call
approx.
0.5 W
approx.
0.5 W
unused
unused
unused
unused
*) Charged handset in base
**) Handset not in base
Writing and editing text
General specifications
DECT standard
Is supported
GAP standard
Is supported
No. of channels
60 duplex channels
Radio frequency range 1880–1900 MHz
Duplex method
Time multiplex,
10 ms frame length
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission power
10 mW, average power
per channel
Range
up to 300 m outdoors,
up to 50 m indoors
Base power supply
230 V ~/50 Hz
Environmental conditions in operation
+5°C to +45°C, 20% to
75% relative humidity
Dialling mode
DTMF (tone dialling)/
PD (pulse dialling)
The following rules apply when writing text:
u Multiple letters and characters are
assigned to each key between Q and
O as well as * and #.
u Control the cursor with u v t s.
u Characters are inserted at the cursor position.
u Press the display key §Delete§ to delete the
character to the left of the cursor.
u The first letter of the name of directory
entries is automatically capitalised and
followed by lower case letters.
Setting upper/lower case or digits
Repeatedly press the hash key # to change
the text input mode.
123
Writing digits
Abc
Upper case *
abc
Lower case
* First letter in capitals, all others in lower case
Version 4, 16.09.2005
When the mode is switched, the active
mode is indicated at the bottom left of the
screen.
67
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 16.04.2010
Appendix
Writing an SMS/names
¤ Enter the individual letters/characters by
pressing the corresponding key.
The characters assigned to the key are
shown in a selection line at the bottom left
of the screen. The selected character is highlighted.
¤ Briefly press the key several times in succession to select the required letter/character.
Standard characters
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x11x12x13x14x15x16x
£ $ ¥ ¤
2 a b c 2 ä á à â ã ç
3d e f 3 ë é è ê
4g h i 4 ï í ì î
5 j k l 5
Lm n o 6 ö ñ ó ò ô õ
Mp q r s 7 ß
N t u v 8 ü ú ù û
Ow x y z 9 ÿ ý æ ø å
Q 1) . , ? ! 2) 0 + - : ¿ ¡ “ ‘ ; _
* * / ( ) < = >%
# @ \ & §
Version 4, 16.09.2005
1) Space
2) Line break
68
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / accessories_SAG.fm / 16.04.2010
Accessories
Accessories
Gigaset handsets
Upgrade your Gigaset to a cordless PABX:
Gigaset C300H handset
Hear whom the call is for with VIP ringtones
High-quality keypad with illumination
1.7" CSTN colour display
Directory for up to 250 entries
Talk/standby time of up to 19 h/340 h,
standard batteries
u Brilliant sound quality in handsfree mode
u Screensaver (digital clock)
u ECO DECT
u Alarm clock
u No interruptions from anonymous calls
u SMS with up to 160 characters
www.gigaset.com/gigasetc300h
Gigaset SL400 handset
Version 4, 16.09.2005
Genuine metal frame and keypad
High-quality keypad illumination
1.8" TFT colour display
Bluetooth® and mini USB
Directory for up to 500 vCards
Talk/standby time of up to 14 h/230 h
Large font for call lists and directory
Brilliant sound quality in handsfree mode:
4 handsfree settings
u Caller pictures, slideshow and screensaver
(analogue and digital clock)
u Silent alert, download ringer melodies
u ECO DECT
u Calendar with appointment scheduler
u Night mode with time-controlled ringer deactivation
u No interruptions from anonymous calls
u Room monitor
u SMS with up to 640 characters
www.gigaset.com/gigasetsl400
69
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / accessories_SAG.fm / 16.04.2010
Accessories
Gigaset S79H handset
Brilliant sound quality in handsfree mode
High-quality genuine metal keypad with illumination
Plus/minus key for simple volume control
1.8" TFT colour display
Mini USB
Directory for up to 500 vCards
Talk/standby time of up to 13 h/180 h,
standard batteries
u Large font for call lists and directory
u Caller pictures, screensaver
(analogue and digital clock)
u Download ringtones
u ECO DECT
u Calendar with appointment scheduler
u Night mode with time-controlled ringer deactivation
u No interruptions from anonymous calls
u Room monitor
u SMS with up to 640 characters
www.gigaset.com/gigasets79h
Gigaset C59H handset
Version 4, 16.09.2005
u Social life management with room monitor and birthday
reminders
u Individual programming of ringtones with 6 VIP-groups
u High-quality keypad with illumination
u 1.8" TFT colour display
u Directory for up to 150 vCards
u Talk/standby time of up to 12 h/180 h,
standard batteries
u Large font for call lists and directory
u Brilliant sound quality in handsfree mode
u Screensaver (digital clock)
u ECO DECT
u Alarm clock
u No interruptions from anonymous calls
u SMS with up to 640 characters
www.gigaset.com/gigasetc59h
70
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / accessories_SAG.fm / 16.04.2010
Accessories
Gigaset SL78H handset
Real metal frame
Modern keypad with high-quality illumination
2.2" TFT QVGA colour display
Bluetooth® and mini USB
Directory for up to 500 vCards
Talk/standby time of up to 14 h/200 h
Brilliant sound quality in handsfree mode
Caller pictures, slide show and screensaver
(analogue and digital clock)
u Download ringtones
u ECO DECT
u Calendar with appointment scheduler
u Night mode with time-controlled ringer deactivation
u Room monitor
u SMS with up to 640 characters
www.gigaset.com/gigasetsl78h
Gigaset E49H handset
Resistant to shocks, dust and water splashes
1.7" CSTN colour display
Hardy illuminated keypad
Colour display
Directory for up to 150 entries
Talk/standby time of up to 12 h/250 h,
standard batteries
u Brilliant sound quality in handsfree mode
u Screensaver
u ECO DECT
u Alarm clock
u Room monitor
u SMS with up to 640 characters
www.gigaset.com/gigasete49h
Gigaset repeater
Version 4, 16.09.2005
The Gigaset repeater can be used to increase the reception
range between your Gigaset handset and the base.
www.gigaset.com/gigasetrepeater
All accessories and batteries are available from your phone retailer.
Use only original accessories. This will avoid possible health risks and personal
injury, and also ensure that all the relevant regulations are complied with.
71
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / accessories_SAG.fm / 16.04.2010
Mounting the base on the wall
Mounting the base on the wall
C300A: 48 mm
C300: 30 mm
Approx. 7 mm
Mounting the charger on the wall
21.6 mm
Version 4, 16.09.2005
Approx. 1.3 mm
72
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / C300ASIX.fm / 16.04.2010
Index
Index
Accepting a call . . . . . . . . . . . . . . . . . . . . . . . 27
Access protection . . . . . . . . . . . . . . . . . . . . . 54
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Acknowledge tones . . . . . . . . . . . . . . . . . . . 53
Activating
answering machine . . . . . . . . . . . . . . . . . 41
answering machine
(remote operation). . . . . . . . . . . . . . 45
auto answer . . . . . . . . . . . . . . . . . . . . . . . . 51
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
keypad lock . . . . . . . . . . . . . . . . . . . . . . . . 22
listening in . . . . . . . . . . . . . . . . . . . . . . . . . 50
muting ringer . . . . . . . . . . . . . . . . . . . . . . . 37
two-way recording . . . . . . . . . . . . . . . . . . 43
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Announcement (ans. mach.) . . . . . . . . . . . 41
Answering machine . . . . . . . . . . . . . . . . . . . 41
activating/deactivating . . . . . . . . . . . . . . 41
deleting messages . . . . . . . . . . . . . . . . . . 42
icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
playing back messages . . . . . . . . . . . . . . 42
remote operation . . . . . . . . . . . . . . . . . . . 45
skipping back . . . . . . . . . . . . . . . . . . . . . . . 42
skipping forward . . . . . . . . . . . . . . . . . . . . 42
Answering machine list . . . . . . . . . . . . . . . . 34
Answering machine, see also
Network mailbox
Approval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Assigning a number key . . . . . . . . . . . . . . . 51
Automatic
auto answer . . . . . . . . . . . . . . . . . . . . . 27, 51
network provider preselection . . . . . . . 29
Version 4, 16.09.2005
Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Base
changing . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
connecting . . . . . . . . . . . . . . . . . . . . . . . . . 11
connecting to PABX . . . . . . . . . . . . . . . . . 56
restoring to default settings . . . . . . . . . . 55
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . 11
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
system PIN . . . . . . . . . . . . . . . . . . . . . . 54, 55
Battery
charging . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Best base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Call
connect participant . . . . . . . . . . . . . . . . . 50
ending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
picking up from answering machine . . 43
transferring (connecting) . . . . . . . . . 49, 50
two-way recording . . . . . . . . . . . . . . . . . . 43
Call duration . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Call screening during recording . . . . . . . . 43
Call waiting
internal call . . . . . . . . . . . . . . . . . . . . . . . . . 50
Call-by-call . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Calling
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Calling line display, notes . . . . . . . . . . . . . . 28
Caring for your telephone. . . . . . . . . . . . . . 66
Changing
dialling mode . . . . . . . . . . . . . . . . . . . . . . . 56
display language . . . . . . . . . . . . . . . . . 15, 51
earpiece volume . . . . . . . . . . . . . . . . . . . . 52
handsfree volume . . . . . . . . . . . . . . . . . . . 52
name of a handset . . . . . . . . . . . . . . . . . . 50
pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
system PIN . . . . . . . . . . . . . . . . . . . . . . 54, 55
Character set . . . . . . . . . . . . . . . . . . . 37, 38, 68
Charge status display . . . . . . . . . . . . . . . . . 2, 3
CLI, CLIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
CNIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Colour scheme . . . . . . . . . . . . . . . . . . . . . . . . 51
Confirmation tone . . . . . . . . . . . . . . . . . . . . 53
Connecting
base to PABX . . . . . . . . . . . . . . . . . . . . . . . 56
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Correcting incorrect entries . . . . . . . . . . . . 20
Customer Care . . . . . . . . . . . . . . . . . . . . . . . . 62
Deactivating
answering machine . . . . . . . . . . . . . . . . . 41
73
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / C300ASIX.fm / 16.04.2010
Version 4, 16.09.2005
Index
auto answer . . . . . . . . . . . . . . . . . . . . . . . . 51
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
keypad lock . . . . . . . . . . . . . . . . . . . . . . . . 22
listening in . . . . . . . . . . . . . . . . . . . . . . . . . 50
muting ringer . . . . . . . . . . . . . . . . . . . . . . . 37
two-way recording . . . . . . . . . . . . . . . . . . 43
Delete key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Deleting
announcement for answering
machine . . . . . . . . . . . . . . . . . . . . . . . 42
characters . . . . . . . . . . . . . . . . . . . . . . . . . . 20
message . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
De-registering (handset) . . . . . . . . . . . . . . . 49
Dialling
dialling mode . . . . . . . . . . . . . . . . . . . . . . . 56
using shortcuts . . . . . . . . . . . . . . . . . . . . . 32
using the directory . . . . . . . . . . . . . . . . . . 31
Digital clock . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
copying number from text . . . . . . . . . . . 33
managing entries . . . . . . . . . . . . . . . . . . . 32
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
order of entries . . . . . . . . . . . . . . . . . . . . . 31
saving entry . . . . . . . . . . . . . . . . . . . . . . . . 31
saving sender’s (SMS) number. . . . . . . . 38
saving the first number . . . . . . . . . . . . . . 31
sending entry/list to handset. . . . . . . . . 32
using to enter numbers . . . . . . . . . . . . . . 33
Display
backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
changing display language . . . . . . . 15, 51
colour scheme . . . . . . . . . . . . . . . . . . . . . . 51
contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
in idle status . . . . . . . . . . . . . . . . . . . . . 17, 21
name (CNIP) . . . . . . . . . . . . . . . . . . . . . . . . 27
network mailbox message . . . . . . . . . . . 46
number (CLI/CLIP) . . . . . . . . . . . . . . . . . . . 27
screensaver . . . . . . . . . . . . . . . . . . . . . . . . . 51
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
selecting from directory . . . . . . . . . . . . . 31
Error tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
External call
diverting to ans. mach. . . . . . . . . . . . . . . 43
Icon
alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . 48
for new messages . . . . . . . . . . . . . . . . . . . 33
keypad lock . . . . . . . . . . . . . . . . . . . . . . . . 22
new message (answering machine) . . . 42
new SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Idle status
display . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 21
Earpiece volume . . . . . . . . . . . . . . . . . . . . . . 52
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Eco mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Eco mode+ . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
End call key . . . . . . . . . . . . . . . . . . . . . . . . . 2, 27
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Entry
saving, changing (preselection) . . . . . . 30
74
Fast access
answering machine . . . . . . . . . . . . . . . . . 44
network mailbox . . . . . . . . . . . . . . . . . . . . 46
General troubleshooting . . . . . . . . . . . . . . . 57
Group call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Handset
activating/deactivating . . . . . . . . . . . . . . 22
changing names . . . . . . . . . . . . . . . . . . . . 50
changing to a different base . . . . . . . . . 49
changing to best reception . . . . . . . . . . 49
contact with liquid . . . . . . . . . . . . . . . . . . 66
de-registering . . . . . . . . . . . . . . . . . . . 48, 49
display language . . . . . . . . . . . . . . . . . 15, 51
earpiece volume . . . . . . . . . . . . . . . . . . . . 52
handsfree volume . . . . . . . . . . . . . . . . . . . 52
idle status . . . . . . . . . . . . . . . . . . . . . . . . . . 21
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
locating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
registering . . . . . . . . . . . . . . . . . . . . . . . . . 48
registering to a different base . . . . . . . . 49
restoring to default settings. . . . . . . . . . 53
set up for use . . . . . . . . . . . . . . . . . . . . . . . 13
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
transferring a call . . . . . . . . . . . . . . . . . . . 49
using multiple . . . . . . . . . . . . . . . . . . . . . . 48
Hash key . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 22
Hearing aids . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / C300ASIX.fm / 16.04.2010
Index
returning to . . . . . . . . . . . . . . . . . . . . . . . .
Incoming list (SMS) . . . . . . . . . . . . . . . . . . . .
Incorrect entries (correction) . . . . . . . . . . .
Industry Canada Certification . . . . . . . . . .
Internal
listening in . . . . . . . . . . . . . . . . . . . . . . . . .
making calls . . . . . . . . . . . . . . . . . . . . . . . .
Internal call . . . . . . . . . . . . . . . . . . . . . . . . . . .
call waiting . . . . . . . . . . . . . . . . . . . . . . . . .
21
37
20
59
50
49
49
50
Key
assigning a number . . . . . . . . . . . . . . . . . 51
Key 1 (fast access) . . . . . . . . . . . . . . . . . . . 2, 44
Keypad lock . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Keys
assigning directory entry . . . . . . . . . . . . 32
control key . . . . . . . . . . . . . . . . . . . . . . . 2, 20
delete key . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
display keys . . . . . . . . . . . . . . . . . . . . . . . 2, 4
end call key . . . . . . . . . . . . . . . . . . . . . . . 2, 27
fast access . . . . . . . . . . . . . . . . . . . . . . . . 2, 44
hash key . . . . . . . . . . . . . . . . . . . . . . . . . 2, 22
message key . . . . . . . . . . . . . . . . . . . . . . . . . .2
on/off key . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
recall key . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
star key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
talk key. . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 27
Language, display . . . . . . . . . . . . . . . . . . 15, 51
List
answering machine . . . . . . . . . . . . . . 33, 34
call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
missed calls. . . . . . . . . . . . . . . . . . . . . . . . . 34
network mailbox . . . . . . . . . . . . . . . . . . . . 33
SMS incoming list . . . . . . . . . . . . . . . . 33, 37
SMS outgoing list . . . . . . . . . . . . . . . . . . . 36
Listening in to a call . . . . . . . . . . . . . . . . . . . 50
Locating a handset . . . . . . . . . . . . . . . . . . . . 49
Lock
activating/deactivating keypad lock . . 22
Version 4, 16.09.2005
Making calls
accepting a call . . . . . . . . . . . . . . . . . . . . . 27
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Manual redial . . . . . . . . . . . . . . . . . . . . . . . . . 33
Medical equipment . . . . . . . . . . . . . . . . . . . . .9
Menu
end tone . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Message key
open list. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
opening lists . . . . . . . . . . . . . . . . . . . . . . . . 33
Messages
copying number to directory. . . . . . . . . 42
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
playing back . . . . . . . . . . . . . . . . . . . . . . . . 42
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Missed call. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Music on hold. . . . . . . . . . . . . . . . . . . . . . . . . 54
Muting
first ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Name
displaying caller's name (CNIP) . . . . . . .
of a handset . . . . . . . . . . . . . . . . . . . . . . . .
Network mailbox . . . . . . . . . . . . . . . . . . . . . .
Network provider preselection
automatic . . . . . . . . . . . . . . . . . . . . . . . . . .
Number
copying from directory . . . . . . . . . . . . . .
copying to the directory . . . . . . . . . . . . .
displaying caller's number (CLIP) . . . . .
entering with directory . . . . . . . . . . . . . .
saving in directory . . . . . . . . . . . . . . . . . .
27
50
46
29
33
33
27
33
31
On/Off key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Operating remotely . . . . . . . . . . . . . . . . . . . 45
Order in directory . . . . . . . . . . . . . . . . . . . . . 31
Outgoing list (SMS) . . . . . . . . . . . . . . . . . . . . 36
PABX
connecting base . . . . . . . . . . . . . . . . . . . .
pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
setting dialling mode . . . . . . . . . . . . . . . .
setting recall. . . . . . . . . . . . . . . . . . . . . . . .
SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
switching to tone dialling . . . . . . . . . . . .
Package contents . . . . . . . . . . . . . . . . . . . . .
56
56
56
56
39
56
10
75
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / C300ASIX.fm / 16.04.2010
Index
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Pause
after line seizure . . . . . . . . . . . . . . . . . . . . 56
after recall key . . . . . . . . . . . . . . . . . . . . . . 56
PD (pulse dialling) . . . . . . . . . . . . . . . . . . . . . 56
PIN change
system PIN . . . . . . . . . . . . . . . . . . . . . . . . . 55
Pin connections . . . . . . . . . . . . . . . . . . . . . . . 67
Playing back
announcement (ans. mach.) . . . . . . . . . . 41
message (answering machine) . . . . . . . 42
Power adapter . . . . . . . . . . . . . . . . . . . . . . . . . .9
Power consumption . . . . . . . . . . . . . . . . . . . 67
Preselection . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Protecting our environment . . . . . . . . . . . . 65
Protecting the phone against access . . . . 54
Pulse dialling . . . . . . . . . . . . . . . . . . . . . . . . . 56
Questions and answers . . . . . . . . . . . . . . . . 57
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Recall key . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 56
Reception booster, see Repeater
Recording
recording time (ans. mach.) . . . . . . . . . . 44
two-way recording . . . . . . . . . . . . . . . . . . 43
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Registering (handset) . . . . . . . . . . . . . . . . . . 48
Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Ring delay . . . . . . . . . . . . . . . . . . . . . . . . . 44, 51
Ringer
changing . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
setting melody. . . . . . . . . . . . . . . . . . . 52, 54
setting volume. . . . . . . . . . . . . . . . . . . 52, 54
Version 4, 16.09.2005
Screen protection, see Screensaver
Screensaver. . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Search directory . . . . . . . . . . . . . . . . . . . . . . 31
Sending
directory entry to handset . . . . . . . . . . . 32
Service (Customer Care) . . . . . . . . . . . . . . . 62
Setting
date . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 26
melody. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
melody (ringer) . . . . . . . . . . . . . . . . . . . . . 52
76
time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 26
wake up time . . . . . . . . . . . . . . . . . . . . . . . 48
Setting up
base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 32
SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
active send service centre . . . . . . . . . . . 38
deleting . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38
forwarding . . . . . . . . . . . . . . . . . . . . . . . . . 38
incoming list . . . . . . . . . . . . . . . . . . . . 33, 37
outgoing list . . . . . . . . . . . . . . . . . . . . . . . . 36
reading . . . . . . . . . . . . . . . . . . . . . . . . . 36, 38
receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
replying to or forwarding . . . . . . . . . . . . 38
saving number. . . . . . . . . . . . . . . . . . . . . . 38
self help with error messages . . . . . . . . 40
to PABXs . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
troubleshooting . . . . . . . . . . . . . . . . . . . . 39
writing . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 67
SMS service centre
changing number . . . . . . . . . . . . . . . . . . . 38
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Snooze mode . . . . . . . . . . . . . . . . . . . . . . . . . 48
Sound, see Ringer
Special functions . . . . . . . . . . . . . . . . . . . . . . 56
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 66
Star key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
System settings . . . . . . . . . . . . . . . . . . . . . . . 54
Talk key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 27
Telephone jack
pin connections . . . . . . . . . . . . . . . . . . . . 67
Text message, see SMS
Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Tone dialling . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Troubleshooting (SMS) . . . . . . . . . . . . . . . . 39
Unknown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Unknown caller . . . . . . . . . . . . . . . . . . . . . . . 28
Using
Calling Line Identification . . . . . . . . . . . . 27
control key . . . . . . . . . . . . . . . . . . . . . . . 2, 20
display keys . . . . . . . . . . . . . . . . . . . . . . . 2, 4
handsfree mode . . . . . . . . . . . . . . . . . . . . 29
Viewing network mailbox message . . . . . 46
Gigaset C300-C300A / Master EN / A31008-xxxx-xxxx-x-xxxx / C300ASIX.fm / 16.04.2010
Index
Volume
earpiece . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
handset handsfree volume. . . . . . . . . . . 52
handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . 52
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 54
Version 4, 16.09.2005
Writing (SMS) . . . . . . . . . . . . . . . . . . . . . . . . . 36
Writing and editing text . . . . . . . . . . . . . . . 67
77

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2010:04:16 08:54:38Z
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2010:04:16 09:15:36Z
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Master BA SL565
Creator                         : Siemens AG
Document ID                     : uuid:71399504-5ff1-4505-8a32-66514ddaef3d
Instance ID                     : uuid:27a7b877-9dc8-4053-bc29-3f7c0265bf66
Page Mode                       : UseOutlines
Page Count                      : 77
Author                          : Siemens AG

EXIF Metadata provided by EXIF.tools