Gigaset Communications DX800A DECT Basestation with Bluetooth User Manual Saturn

Gigaset Communications GmbH DECT Basestation with Bluetooth Saturn

User Manual EN

Download: Gigaset Communications DX800A DECT Basestation with Bluetooth User Manual Saturn
Mirror Download [FCC.gov]Gigaset Communications DX800A DECT Basestation with Bluetooth User Manual Saturn
Document ID1552330
Application ID9EuooNOZv0PydF4yh8+IaA==
Document DescriptionUser Manual EN
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize316.31kB (3953903 bits)
Date Submitted2011-09-30 00:00:00
Date Available2011-09-30 00:00:00
Creation Date2011-05-24 12:11:35
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2011-05-24 12:49:24
Document TitleSaturn.book
Document CreatorFrameMaker 7.2
Document Author: steffen_in

Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Cover_front.fm /
Congratulations
By purchasing a Gigaset, you have chosen a brand that is fully committed
to sustainability. This product’s packaging is eco-friendly!
To learn more, visit www.gigaset.com.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Cover_front.fm /
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / introduction.fm / 24.05.11
Gigaset DX800A all in one – your perfect companion
Gigaset DX800A all in one – your perfect companion
... impressive interior and exterior qualities. Go crazy for the vibrant 3.5" TFT display, first-class
sound quality and elegant exterior. Your Gigaset can do a lot more than just make calls:
DSL or DSL and analogue fixed line – easy
– Simply connect your Gigaset. It will automatically detect the networks to which it is connected and adapt its configuration accordingly. It then launches the appropriate wizards for
you to set up your send and receive connections and assign the connected devices.
Bluetooth, Ethernet, DECT and FAX port
Connect your Gigaset to the Internet and your PC via Ethernet. Use your public and private
directories on the Internet (¢ page 74). Update the directory on your Gigaset, the directory
on your Bluetooth mobile and your directory on the PC simultaneously.
Directory for up to 1000 vCards – calendar and appointments
Save phone numbers and other data to the local directory (¢ page 69). Enter appointments
and birthdays in the calendar and set reminders (¢ page 100).
Use your Gigaset as a PABX
Register up to six handsets and a fax machine and use the three Gigaset answering machines.
Assign each device its own phone number.
Go online with your Gigaset
Use your phone's info centre and have information specifically provided for the phone from
the Internet shown on the display (¢ page 86).
Do not disturb
Switch off the display backlight at night (¢ page 119), use time control for calls
(¢ page 121) or reject unknown calls (¢ page 121).
Other practical information
Transfer the directory from an existing Gigaset handset (¢ page 71), use the programmable
function keys (¢ page 116) for quick dial or quick access to important functions, use the
convenient headset to make calls (with cord ¢ page 115 or Bluetooth ¢ page 112), skip
back five seconds when listening to answering machine messages to repeat the last section
(¢ page 89), use your phone to read your e-mail (without a PC).
Environment
Version 4, 16.09.2005
Gigaset Green Home – be environmentally aware when using your phone. For details of our
ECO DECT products, visit www.gigaset.com/service.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / introduction.fm / 24.05.11
Gigaset DX800A all in one – your perfect companion
For more information about your phone, visit www.gigaset.com/gigasetDX800A.
After purchasing your Gigaset phone, please register it at www.gigaset.com/service –
this will ensure any questions you may have or warranty services you request are dealt with
even faster!
Have fun using your new phone!
Please note
To change the display language, proceed as follows (¢ page 118):
¤ Press right on the control key v.
¤ Press the following keys in sequence: * # Q 3 #.
¤ Press the control key q to move up or down until the correct language is selected.
Version 4, 16.09.2005
Then press the right display key.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / overview.fm / 24.05.11
Base overview
Base overview
Version 4, 16.09.2005
8 9 10 11
1 Adjust volume S = quieter; R = louder
During a call/message playback: handsfree/
receiver volume;
When an external call is being signalled:
ringer volume
2 Display
3 Display keys (programmable; page 40,
page 116)
In the menu: open a menu for further functions
4 Message key (page 68)
Access to call and message lists;
Flashes: new message/call or new firmware/
new provider profile available
5 End/back key (red)
End, cancel function, go back one menu level
(press briefly); back to idle status (press and
hold)
6 Function keys (programmable; page 116)
7 Redial
Open redial list (page 65)
12
13
14
15
16
8 Handsfree key
9 Mute key
During a call: activate/deactivate microphone
10 * key
Activate/deactivate ringer (press and hold);
Text input: special characters table
11 Back key for answering machine
During playback: back to the start of the message/previous message
12 Playing back messages
Activate/deactivate message playback
13 On/off key for answering machine
Activate/deactivate assigned answering
machine(s) (page 90)
14 # key
For text input: switch between upper/lower
case letters and digits
15 Control key (page 39)
16 Microphone
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / overview.fm / 24.05.11
Display icons
Display icons
Display in idle status (example)
· 6:30am
Ã1 2 3
Base status
(two lines)
Current month/year
à 02
Mo Tu We Th
Time
Fr
Sa Su
Mar 2011
01 02 03 04 05 06 07
8:52am
08 09 10 11 12 13 14
15 16 17 18 19 20 21
Internal name
INT 1
22 23 24 25 26 27 28
29 30 31
Calls
Appointment entered in
the calendar (page 100)
Current date
Calendar
Status display in the headers: The following icons are displayed dependent on the settings
and the operating status of your base:
Ã
123
à 02
¼
òôl
ó · 6:30am
™ 10 Ë 09 n 08
Answering machine icon
1/2/3 numbers of the activated answering machines
(orange = on)
Eco mode activated (green) (page 100)
ò: Bluetooth activated (page 108)
additionally ô if Bluetooth headset connected,
additionally l if Bluetooth GSM mobile connected
Ringer deactivated (page 121)
Replaced by ñ, when alert tone activated
Alarm clock switched on and wake-up time set (page 103)
Number of new messages:
In the missed alarms list (page 102)
In e-mail list (page 83)
In the missed calls list (page 68)
On the network mailbox (page 99)
Signalling:
External call
(page 52)
Version 4, 16.09.2005
ØÙÚ
Internal call
(page 105)
Øã Ú
Answering machine is Alarm
recording (page 89)
(page 103)
ØÃ Ú
ؼÚ
Appointment
(page 100)/anniversary (page 74)
ØÜ
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnIVZ.fm / 24.05.11
Contents
Contents
Gigaset DX800A all in one – your perfect companion . . . . . . . . . . . . . . . . 1
Base overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Checking the package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the base – installation wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Proceeding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
11
12
18
37
38
Operating the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Control key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keys on the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correcting incorrect entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Understanding the operating steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39
40
40
40
41
42
Menu tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Making an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accepting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calling Line Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes on calling line display (CLIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VoIP telephony via Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset HDSP – telephony with brilliant sound quality . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating handsfree/open listening mode . . . . . . . . . . . . . . . . . . . . . .
Muting the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49
52
52
53
54
55
56
56
57
Making calls using network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Configuring general settings for all calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring settings for the next call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring settings during an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functions after a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
58
61
61
64
Version 4, 16.09.2005
Using lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Redial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Answering machine list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening lists with the message key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
66
66
68
Using directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnIVZ.fm / 24.05.11
Contents
Using the local base directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using online directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the private net directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Gigaset.net directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
69
74
77
78
Making cost-effective calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Defining dialling plans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Linking a number with a call-by-call number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Displaying call duration/charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
E-mail notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Opening the incoming e-mail list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the message header and text of an e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . .
View e-mail sender's address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting e-mail messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
83
84
85
85
Info centre – continuous Internet access from your phone . . . . . . . . . . 86
Starting the info centre, selecting info services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Login for personalised info services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating the info centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying information from the Internet as a screensaver . . . . . . . . . . . . . . . . . . . . .
86
87
87
88
Operating the base's answering machine . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Operating via the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating call screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the recording parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating when on the move (remote operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90
94
95
95
Using the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Network mailbox: activating/deactivating, entering numbers . . . . . . . . . . . . . . . . . 97
Configuring an answering machine for quick dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
ECO DECT: Reducing energy consumption and radiation . . . . . . . . . . 100
Setting an appointment (calendar) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Displaying missed appointments, anniversaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Setting the alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Connecting/using other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Version 4, 16.09.2005
Registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
De-registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Locating a handset (paging) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Making internal calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Changing the name of an internal party . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Changing the internal number of an internal party . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Using Bluetooth devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Connecting a fax machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Connecting and using a wire-bound headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Setting up the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Accessing functions and numbers quickly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnIVZ.fm / 24.05.11
Contents
Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Changing the handsfree/receiver volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Setting ringers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Activating/deactivating advisory tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Activating/deactivating music on hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Resource directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Configuring the system settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Setting the date and time manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Protecting against unauthorised access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Setting your own area code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Setting the base's IP address in LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Setting up/deleting connections (MSNs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Configuring VoIP connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Assigning send and receive connections to internal parties . . . . . . . . . . . . . . . . . . . 128
Updating the phone firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Activating/deactivating the DECT interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Activating/deactivating the FAX port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Restoring the base to the default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Checking the base's MAC address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Changing the default connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Connecting the base to a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Saving an access code (outside line code) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Setting pauses (fixed line) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Setting recall (fixed line) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Transferring a call – ECT (Explicit Call Transfer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Using Centrex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Selecting dialling mode/options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Industry Canada Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
FCC / ACTA Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
End-user limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Questions and answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
VoIP status codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Checking service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Version 4, 16.09.2005
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Caring for your telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Insert strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Writing and editing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Using Gigaset QuickSync – additional functions via the PC interface . . . . . . . . . . 150
Using Open Source software contained in the product . . . . . . . . . . . . . . . . . . . . . . . 151
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnIVZ.fm / 24.05.11
Contents
GNU General Public License (GPL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
GNU Lesser General Public License (LGPL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Version 4, 16.09.2005
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / security.fm / 24.05.11
Safety precautions
Safety precautions
Warning
Read the safety precautions and the user guide before use.
Explain their content and the potential hazards associated with using the telephone to your
children.
Use only the power adapter supplied, as indicated on the underside of the base.
Use only the cables supplied for fax, fixed line, LAN and receiver connection and connect these to the intended port only.
Using your telephone may affect nearby medical equipment. Be aware of the
technical conditions in your particular environment e.g., doctor's surgery.
Do not install the phone in a bathroom or shower room. The phone is not splashproof.
Do not use your phone in environments with a potential explosion hazard
(e.g., paint shops).
ƒ
If you give your phone to a third party, make sure you also give them the user guide.
Remove faulty telephones from use or have them repaired by our Service team,
as they could interfere with other wireless services.
Please note
u Please note that only terminals that are operated in-house (inside buildings) may be con-
nected to the analogue TAE connections.
u Not all functions described in this user guide are available in all countries and with all pro-
Version 4, 16.09.2005
viders.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
First steps
Checking the package contents
10
One base
One receiver to be connected to the base
One (coiled) cable for connecting the receiver to the base
One power cable for connecting the base to the mains power supply
One phone cable for connecting the base to the (8-pin with 2 mini western jacks
8/8; the inner 4 pins are assigned and the cable slightly flattened)
6 One phone cable for connecting the base to the analogue fixed line
(TAE RJ45 8-pin; the outer 2 pins are assigned and the cable slightly flattened)
7 One cable for connecting a fax machine to the base
(6 pin with 2 mini western jacks 6/6)
8 One Ethernet (LAN) cable (Cat 5 with 2 RJ45 modular jacks) for connecting the
base to a router (LAN/Internet) or PC
9 One quick user guide
10 One CD
Version 4, 16.09.2005
10
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
Firmware updates
This user guide describes the functions of your base from firmware
version 56.00.
Whenever there are new or improved functions for your Gigaset, firmware
updates are made available for you to download to your base (¢ page 129).
If this results in operational changes for using your base, a new version of this
user guide or the necessary amendments will be published on the Internet at
www.gigaset.com.
Select the product to open the relevant product page for your base, where you
will find a link to the user guide.
To find out what version of firmware is currently loaded (¢ page 146).
Setting up the base
The base is designed for use in dry rooms in a temperature range of +5°C to +45°C.
¤ Set up the base at a central point in the building.
Please note
If you wish to operate handsets from the base, consider the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. The range is reduced when Eco mode is activated (¢ page 100).
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Warning
u Never expose the telephone to any of the following: heat sources, direct sun-
light or other electrical appliances.
Version 4, 16.09.2005
u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
11
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
Connecting the base
The following diagram is an overview of all connections for your base.
The individual connections are described in detail below. In order for you to make
calls on your phone via the fixed line and VoIP, you need to connect the base to the
fixed line and Internet (see diagram below).
PC
Version 4, 16.09.2005
Follow the steps in the order given below:
1. Connect the receiver to the base.
2 Connect the base to the telephone network (analogue fixed line or ).
3 Connect the base to the mains power supply.
4 Connect the base to the router for accessing the Internet (via router and modem
or via router with integrated modem) and for configuring the base via the
Web configurator.
5 You can connect a PC to the base via the second LAN socket LAN2 (optional) –
e.g., for connecting the PC to the router. The base takes on the task of a switch.
6 Connect the base to a fax machine (¢ page 114).
7 Connect a wire-bound headset to the base.
For instructions on using the headset see page 115, page 51 and page 53.
For instructions on connecting and using a Bluetooth headset (see page 108,
page 51 and page 53).
12
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
1. Connecting the receiver to the base
Underside of
the base
Version 4, 16.09.2005
1. Insert the jack, which can be found on the longer straight end of the connection
cable, into the connection port marked with the ^ icon on the underside of
the base.
2 Place the straight part of the cable in the cable recess provided.
3 Insert the other jack on the connection cable into the port on the receiver.
13
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
2. Connecting the base to the telephone network
3a
3b
Underside of
the base
1. Pass one end of the phone cable from behind through the recess in the housing.
– Use the 8-pin cable with 2 mini western jacks 8/8 if you wish to connect the
phone to the network (¢ page 10, cable 5).
– Use the TAE connection cable with RJ11 plug to connect to the analogue
fixed line (¢ page 10, cable 6).
2 Plug the telephone cable into the port marked with the ] icon on the underside of the base.
3 Then connect the telephone cable to the fixed line connection.
Version 4, 16.09.2005
Your Gigaset telephone automatically detects which line it is connected to and
the installation wizard later prompts you to make all the necessary settings for
the current connection (¢ page 18).
14
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
3. Connecting the base to the mains power supply
1. Insert the small jack on the power cable from the rear into the recess in
the housing.
2 Plug the jack into the port marked with the \ icon on the underside of
the base.
3 Then connect the power cable to the mains power supply.
Warning
u Keep the power adapter plugged in at all times for operation, as the base
does not work without a mains connection.
u Use only the power and telephone cables supplied. Pin connections on tel-
ephone cables can vary (pin connections ¢ page 149).
Now you can make calls with your base via the fixed line, and can be reached via
your fixed line number or the main number of your connection!
Version 4, 16.09.2005
An answering machine on the base is set with a pre-recorded announcement in
answer and record mode (¢ page 89).
15
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
4. Connecting the base with a router (Internet) or PC
Your base features two LAN connections, via which you can connect the base to a
router and/or PC.
Connection to a router is required for Internet telephony VoIP (Voice over Internet
Protocol). You can set up and configure up to six accounts (VoIP phone numbers)
from one or several VoIP provider(s) on the base.
Your base also needs to be connected to the router for the following features on
your phone:
u You wish to be notified as soon as new software is available for your base on the
Internet.
u The date and time on your base should be updated by a time server on the
Internet.
u You want to use info services and/or online directories on your base.
The base will have to be connected to a PC (via a router or directly) if you wish to
use the following features of your base:
u You wish to set up the base using its Web configurator.
u You wish to use the additional PC software "Gigaset QuickSync over Ethernet"
to dial numbers via the PC (e.g., numbers from the PC directory) or to load
images or melodies from the PC to your base.
For Internet access you need a router connected to the Internet via a modem (this
may be integrated in the router).
Please note
Version 4, 16.09.2005
For telephony via the Internet, you need a broadband Internet connection
(e.g., DSL) with flat rate (recommended) or volume rate and a router that
connects your phone to the Internet. You can find a list of recommended
routers on the Internet at:
www.gigaset.com/service
From here, go to the FAQ page and select your Gigaset IP telephone. Search for
"Router", for example.
16
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
1. Guide the end of the Ethernet cable provided (Cat 5 with 2 RJ45 modular jacks)
from the rear through the recess in the housing.
2 Plug the jack on the Ethernet cable into the LAN port on the underside of
the base.
3 Then insert the second Ethernet cable jack into a LAN port on the router or PC..
Data protection notice
When the device is connected to the router, it automatically contacts the
Gigaset support server to make it easier for you to configure the devices and to
enable communication with the Internet services.
For this purpose, every device sends the following device-specific information
once every day:
u Serial number/item number
u MAC address
u Private IP address for the Gigaset in the LAN/its port numbers
u Device name
u Software version
On the support server, this information is linked to the existing device-specific
information:
u Gigaset.net phone number
u System-related/device-specific passwords
Version 4, 16.09.2005
Further information about the Gigaset.net service data saved can be found at
www.gigaset.net/privacy-policy
You are now able to establish VoIP connections within Gigaset.net
(¢ page 56).
17
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
Setting up the base – installation wizard
As soon as the phone is connected to the mains power supply, the firmware is
started. The telephone checks which telephone connections it is connected to.
If no connections have been generated on the base yet, the installation wizard
starts. The wizard allows you to make all necessary settings for your phone.
The following message appears in the display.
Setup - Welcome
Would you like help
setting up
your phone?
No
Yes
¤ Press the display key §Yes§ to start
installation.
Please note
u The installation wizard only starts if no connection has been configured on
the base yet. If connections have already been configured, you can start the
IP and wizards (individually) via the menu, if necessary.
u Use only the installation wizard on the base, but not on a registered handset.
Version 4, 16.09.2005
Several individual wizards are combined to form the installation wizard. The individual wizards that start on your device depend on the type of your device and the
connections to which the device is connected. The following individual wizards are
included in the installation wizard:
1 IP wizard
2 Registration wizard
3 Connection wizard
18
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
Connection
Procedure
For connection to VoIP
2. IP wizard
3. Registration wizard
4. Connection wizard
Then: installation complete
For connection to the analogue
fixed line and VoIP
2. IP wizard
3. Registration wizard
4. Connection wizard
Then: installation complete
Please note:
u If the installation wizard is activated, no other handset can access the Settings
Version 4, 16.09.2005
menu on the base.
u To quit the installation wizard before the process is complete, press and hold the
red end key T. All changes you have already saved using §OK§ are retained.
u To skip a setting, press left on the control key u or the display key §No§.
19
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
1. wizard: Assigning/entering the connection's MSNs
Prerequisite: You have connected the base to the telephone network.
Several numbers (MSNs) were provided by the network provider when you
received your connection confirmation. You can save up to ten numbers (MSNs) on
your base. If there is no MSN entered on your base, you can do the following with
the wizard:
u Assign the MSNs for your connection i.e., call them up from the exchange (automatic MSN assignment) or enter them manually.
Please note:
Not every provider supports automatic MSN assignment. If this feature is not
supported, then you must enter the MSNs for your connection manually.
u Set the receive MSN.
u Set the send MSN.
ISDN Wizard
Start ISDN
installation wizard?
No
Yes
¤ Press the display key §Yes§ to start the
installation.
Ð
ISDN Wizard
This wizard helps you
detect and configure
your ISDN phone
¤ Press the display key §OK§ to start
numbers (MSNs).
Version 4, 16.09.2005
OK
20
automatic MSN assignment. This
process will take some time.
Detecting your ISDN phone numbers (MSNs)... is displayed on the
screen.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / starting.fm / 24.05.11
First steps
Ð
ISDN Wizard
MSN Assignment
MSN1: 12345601
After the MSNs have been successfully
assigned, a list containing the MSNs is
displayed.
MSN2: 12345602
MSN3: 12345603
MSN4: 12345604
Change
¤ Press the display key §OK§ to close
OK
the wizard.
The display shows ISDN installation
complete..
Please note
You can change the names of the MSNs (¢ page 126).
If no MSNs were detected, No MSNs detected. is displayed. You are prompted to
enter your MSNs manually:
ISDN Wizard
Ð
Please enter your
MSN data.
Back
OK
¤ Press the display key §OK§ to enter the
MSNs manually.
¤ Enter a name for MSN 1 via the
Configure MSNs
MSN - Name:
¤
MSN - Number:
Abc
Version 4, 16.09.2005

¤ You can enter data in the following fields:
First Name: / Last Name:
Enter first names and/or surnames.
If you do not enter a name in either of the
fields, the first phone number saved in
the entry is saved and displayed in place
of a surname.
For instructions on entering text and
special characters, see page 149.
Phone (Home): / Phone (Office): /
Phone (Mobile):
Enter a number in at least one of the
fields.
When scrolling through the directory,
prefixed icons indicate which numbers
are contained in the entry:
Ball, Tim
äk l Sand, Anna
Turner, Tom
Directory entries
You can save the following information in a
directory entry:
u Name and surname
u Up to three numbers
u E-mail address
u Anniversary with reminder
u VIP ringer with VIP icon
u Caller picture
Open the directory in idle status or during an
external call with the s key (press briefly) or
via the menu
v ¢ Î ¢ Directory
Length of the entries
3 numbers:
Max. 32 digits each
Name and surname: Max. 16 characters
each
Version 4, 16.09.2005
E-mail address:
Max. 60 characters
Æ
Æ
ä denotes Phone (Home),
k denotes Phone (Office),
l denotes Phone (Mobile).
E-Mail:
Enter the e-mail address.
Anniversary:
Select On or Off.
With setting On:
Enter Anniversary (Date) and Anniversary (Time) and select reminder type:
Anniversary (Signal) (¢ page 73).
Caller Melody (VIP):
Mark a directory entry as a VIP
(Very Important Person) by assigning
a specific ringer to it. You recognise
VIP calls by the ringer.
VIP entries are highlighted by the
Æ icon in the directory.
Prerequisite: Calling Line Identification
(page 53).
69
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 24.05.11
Using directories
Caller Picture:
Prerequisite: Calling Line Identification
Presentation (CLIP).
You can select:
– A picture to be displayed when the
party calls (see Resource directory,
page 122).
– One of the colours from Color 1 to
Color 6, to be used as the display colour when the caller calls.
– No Picture if there is to be no visual
signal for the caller
§Save§
Press the display key.
Order of directory entries
Directory entries are generally sorted alphabetically by surname. Spaces and digits take
first priority. If only the first name was
entered in the directory, this is incorporated
into the sort order instead of the surname.
The sort order is as follows:
1. Space
2. Digits (0–9)
3. Letters (alphabetical)
4. Remaining characters (*, #, $ etc.)
To get round the alphabetical order of the
entries, insert a space or a digit in front of the
first letter of the surname. These entries will
then move to the beginning of the directory.
Searching for a directory entry
Open the directory.
You have the following options:
u Use s to scroll through the entries until
the required name is selected.
Press s briefly to scroll on an entry-toentry basis.
Press and hold s to scroll through the
directory.
u Enter the first letters of the name (max. 8),
if necessary scroll to the entry with the s
key. The letters entered are displayed in
the bottom display line.
To skip from any point in the list to the
start of the list (), press the
red end key T briefly.
The directory searches for the surname.
If a surname has not been added, then it
will search for the first name.
Dialling with the directory
s ¢ s (Select entry).
Pick up the receiver.
Or during a call:
§Dial§
Press the display key.
If the entry only contains one phone
number, this is the number that is dialled.
If the entry contains several numbers, the
icons for the numbers stored are displayed:
ä / k / l.
Select a number.
§Dial§
Press the display key.
The number is dialled.
Please note
Version 4, 16.09.2005
When dialling, you can link several numbers from the directory (e.g., a call-by-call
number to a telephone number,
¢ page 82).
70
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 24.05.11
Using directories
Managing directory entries
Viewing entries
¢ s (Select entry).
§View§ / w
Press the display key or the middle of the control key. The entry
is displayed.
Scroll through the entry if necessary.
Using other functions
Prerequisite: The directory was opened
while the base was in idle status.
§Options§
Press the display key.
You can select the following functions
with q:
Display Number
Select a number from the entry as
required and press the display key §Dial§.
Edit or add to the saved number and then
dial with c or save as a new entry; for
the latter, press the display key Ó after
the number is displayed.
Delete Entry
Delete the selected entry.
Copy Entry
– to Internal: Send a single entry to a
handset (page 71).
– vCard via Bluetooth: Send a single
entry in vCard format via Bluetooth.
Editing entries
¢ s (Select entry).
§View§ §Edit§
¤
Press the display keys one after
the other.
Perform changes and save.
Using other functions
When the base is in idle status:
s ¢ s (Select entry)
¢ §Options§ (Open menu)
You can select the following functions
with q:
Display Number
(see above/page 71)
Edit Entry
Edit selected entry.
Delete Entry
Delete selected entry.
Copy Entry
(see above/page 71)
Delete List
Delete all entries in the directory.
Copy List
to Internal: Send the complete list to a
handset (page 71).
vCard via Bluetooth: Send the complete
list in vCard format via Bluetooth.
Available Memory
Display the number of entries that are still
available in the directory.
Exchanging directory/entries with
handsets
You can send entries from the local directory
or the complete local directory to handsets
as well as receive directory entries from the
handsets.
Please note:
u Entries with identical numbers are not
overwritten on the receiving handset.
u The transfer is cancelled if the base rings
or the receiving memory is full.
u Anniversary reminders, pictures and
sounds entered are not transferred.
Prerequisites:
u The receiving handset is registered to the
Version 4, 16.09.2005
base.
u The handset can send and receive direc-
tory entries.
71
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 24.05.11
Using directories
Sending a directory/directory entries
to a handset
s ¢ s (Select entry)
¢ §Options§ (Open menu)
¢ Copy Entry / Copy List
¢ to Internal
Select the internal number of
the receiving handset and
press §OK§.
The transfer begins.
You can transfer several individual entries
one after the other by responding to the
Entry copied - Copy next entry? prompt
with §Yes§, selecting the entry and §Copy§, or
pressing the middle of the control key w.
A successful transfer is confirmed by a message and confirmation tone.
Please note
The transfer is interrupted in the event of
an external incoming call.
Receiving a directory/directory entries
from a handset
Prerequisite: The base is in idle status.
¤ Start the transfer of directory entries on
the handset as described in the handset
user guide.
If the data has been transferred successfully,
the display on the base will indicate the
number of entries received (so far).
Version 4, 16.09.2005
Transferring the directory/entries
as a vCard with Bluetooth
In Bluetooth mode (¢ page 108), you can
transfer directory entries in vCard format
e.g., to exchange entries with your mobile or
PC.
s ¢ s (Select entry)
¢ §Options§ (Open menu)
¢ Copy Entry / Copy List
¢ vCard via Bluetooth
The list of "Known Devices" (¢ page 110)
is displayed and Bluetooth is activated,
if necessary.
72
Select device and press §OK§.
Or:
 Select and press §OK§ to search
for Bluetooth devices.
Select device and press §OK§.
If necessary, enter the PIN for
the Bluetooth device and
press §OK§ (page 109).
The transfer starts.
Once an individual entry has been transferred, you can select an additional entry in
the directory and transfer it to the Bluetooth
device using §Copy§.
Please note
Any incoming calls are ignored during
the vCard transfer.
Receiving a vCard with Bluetooth
If a device from the "Known Devices" list
(¢ page 110) sends a vCard to your base,
this occurs automatically. You are informed
about it via the display.
If the sending device does not appear in the
list, you are asked on the display to enter the
device PIN for the sending device:
If necessary, enter the PIN for
the sending Bluetooth device
and press §OK§.
The vCard transfer starts.
If the device should be added to the list of
known Bluetooth devices, press the display
key §Yes§ after the transfer. Pressing §No§
returns the base to idle status.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 24.05.11
Using directories
Adding a displayed number to
the directory
Copying a number or e-mail
address from the directory
You can add numbers to the directory:
u From a list e.g., the call/answering
machine list or the redial list
u From a public online directory or classified directory
u From your private net directory
u When dialling a number
In some operating situations, you can open
the directory to copy a number or e-mail
address, for example. Your base does not
have to be in idle status.
¤ Depending on the operating situation,
open the directory with s or ö.
Select entry (¢ page 70).
A number is displayed:
Saving an anniversary in the
directory
§Options§
¢ Copy to Directory
Or:
Ó
Press the display key.
The directory is opened. You can create a
new entry or extend an existing entry.
Select  or the
directory entry and press §OK§.
Select the type of phone
number ä / k / l and
press §OK§. The number is copied
into the corresponding field.
If the number field is already occupied,
Overwrite existing number? is displayed.
§Yes§
Press the display key to overwrite the number. If you select
§No§, you are asked to select
another type of phone number.
¤ If necessary, complete the entry
(¢ page 69).
Please note
Version 4, 16.09.2005
For a new entry:
u If you have CNIP, the first 16 characters
of the transmitted name are also copied to the Last Name line.
u If you are copying a number from an
online directory, the surname or nickname (if available) are copied into the
Last Name field.
u The message playback is interrupted
during the number transfer from the
answering machine list.
For each entry in the directory, you can save
an anniversary and specify a time at which a
reminder call should be made on the anniversary (default setting: Anniversary: Off).
Anniversaries are automatically recorded in
the calendar (page 100).
s ¢ s (Select entry)
§View§ §Edit§ Press the display keys one after
the other.
Scroll to the Anniversary: line.
Select On. The following fields
are displayed.
¤ You can enter data in the following fields:
Anniversary (Date)
Enter day/month/year in 8-digit format.
Anniversary (Time)
Enter the hour/minute for the reminder
call in 4-digit format.
Anniversary (Signal)
Select the reminder type.
§Save§
Press the display key.
Please note
A time must be specified for reminder
calls. If you have selected the visual signal, you do not have to specify the time.
73
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 24.05.11
Using directories
Deactivating anniversaries
s ¢ s (Select entry)
§View§ §Edit§ Press the display keys one after
the other.
Scroll to the Anniversary: line.
Select Off.
§Save§
Press the display key.
Anniversary reminder call
In idle status, a reminder call is shown in the
display of the handset (¢ page 4) and signalled with the selected ringer.
You can:
§OFF§
Press the display key to
acknowledge and end the
reminder call.
When you are on the phone, a reminder call
is indicated on the handset with a single
advisory tone.
Anniversaries that are indicated during a call
and are not acknowledged are entered in
the Missed Alarms list (page 102).
Using online directories
You can use public online directories (online
directories and classified directories e.g.,
"Yellow Pages") depending on your provider.
You can configure the online directories you
wish to use via the Web configurator.
Exclusion of liability
Gigaset Communications GmbH assumes
no guarantee or liability for the availability
of this service. The service may be discontinued at any time.
Opening an online/classified
directory
Prerequisite: The base is in idle status.
Press and hold.
Or:
v ¢ Î Contacts ¢ Network Directory
This opens the list of online directories. Provider-specific names appear in the display.
Select a directory (online directory or classified directory) from
the list and press §OK§.
This establishes a connection to the online
directory or the classified directory.
If there is only one online directory available,
a connection is immediately established if
you press and hold down the control key.
Please note
Version 4, 16.09.2005
You can also establish a connection to
the online directory as follows:
¤ When the base is in idle status,
dial 1#91 and then pick up the
receiver c.
¤ To establish a connection to the classified directory, dial 2#91.
¤ To establish a connection to the
Gigaset.net directory, dial 1188#9.
Calls to the online directory are always
free of charge.
74
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 24.05.11
Using directories
Searching for an entry
Version 4, 16.09.2005
Prerequisite: You have opened the online
directory/classified directory.
¤ You can enter data in the following fields:
Last Name: (online directory) or
Category/Name: (classified directory)
Enter the name, part of a
name or the business type
(max. 30 characters).
City:
Enter the name of the town/city
in which the party you are
searching for lives (max.
30 characters).
If you have already completed a
search, the last names of the
towns/cities you entered are
displayed (maximum of five).
You can enter a new name or
select one of the city names displayed using s and confirm
with §OK§.
Or:
Number: Enter the number
(max. 30 characters).
¤ Press the display key §Search§ or w to start
the search.
You must make an entry in either Last Name
or Category/Name: and in City or in
Number. Searching by number is only possible if supported by the online directory you
have selected. For instructions on entering
text see page 149.
A list of the towns/cities found is displayed if
the search returns more than one result:
Select the town/city.
If the name of a town/city is
longer than one line, it is abbreviated. Select §View§ to view the
complete name.
If no matching town/city is
found: Press §Change§ to change
the search criteria. The entries
for Category/Name and City are
copied and you can change
them.
§Search§
Press the display key to continue the search.
A corresponding message will appear on the
display if no party is found to match the
search criteria. You have the following
options:
¤ Press the display key §New§ to start a new
search.
Or:
¤ Press the display key §Change§ to change
the search criteria. The name and town/
city are copied over and you can change
them.
No hits are displayed if the list of hits is too
large. A message to this effect is displayed.
¤ Press the display key §Detail§ to start a
refined search (¢ page 76).
Or:
¤ Depending on the provider, you can view
the list if the number of hits is shown on
the display. Press the display key §View§.
Search result (hit list)
The search result is shown as a list on the display. Example:
Net Directory
2/50
Sand, Marie Elisabe ...
0049123456789
Parkstraße 11
Berlin 12345, Germany
View
Options
1. 2/50: Consecutive number/total number of
hits (only the consecutive number is displayed if the total number of hits >99).
2. Four lines including party's name, business
type, telephone number and address (possibly abbreviated). If a fixed line number is not
available, the mobile number (if available) is
displayed.
75
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 24.05.11
Using directories
You have the following options:
¤ You can scroll through the list with q.
¤ Press the display key §View§. Displays the
full details of the entry (name, business
type where applicable, address, telephone numbers). You can scroll through
the entry with q.
Use §Options§ to access the following options:
Refine search
Refine search criteria and restrict hit list
(¢ page 76).
New search
Start a new search.
Copy to Directory
Copy an entry to the local directory. If an
entry contains several numbers, they are
displayed in a selection list. A new entry is
created for the selected number. The surname is transferred to the Last Name
field of the local directory (¢ page 73).
Copy to Private NetDir.
Transfer the selected entry to the private
net directory. The private directory and
online directory must be provided by the
same provider.
Depending on your provider, you can add
a nickname to the entry in your private
directory.
Calling subscribers
Version 4, 16.09.2005
Prerequisite: A hit list is displayed.
¤ Select an entry and pick up the
receiver c.
If the entry only contains one phone
number, this is the one that is dialled.
A list of numbers appears if there is more
than one number.
¤ Using q, select a number and press the
display key §Dial§.
76
Starting a refined search
You can use the search options available in
the refined search (first name and/or street)
to limit the number of hits returned by a previous search.
Prerequisite: A search result is displayed (hit
list with multiple entries or a message indicating too many hits).
§Detail§
Press the display key.
Or:
§Options§ ¢ Refine search
Select and press §OK§.
The search criteria from the previous search
are copied and entered in the corresponding
fields.
Last Name: (online directory) or
Category/Name: (classified directory)
If necessary, change the name/
business type or extend the partial name.
City:
Name of the city/town from the
previous search is shown (cannot be changed).
Street:
If necessary, change the name
of the street (max. 30 chars.).
First Name: (only in the online directory)
If necessary, enter the first name
(max. 30 characters).
§Search§
Start refined search.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 24.05.11
Using directories
Using the private net
directory
Some providers offer users the option of creating and managing a private net directory
on the Internet.
The advantage of an online directory is that
you can call up entries from any telephone
or PC e.g., from your VoIP phone in the office
or your PC at a hotel.
You can use the private net directory on your
base.
Prerequisites:
u You can create your private net directory
using your PC's Web browser.
u You can create and manage entries in the
online directory via your PC's Web
browser.
u Activate the online directory on your
base via the Web configurator. It is particularly important that you store the user
name and password for accessing the private net directory in the base.
You can use the directory from every registered handset.
Opening the online directory
Prerequisite: The base is in idle status.
Press and hold.
Or:
v ¢ Î Contacts ¢ Network Directory
Version 4, 16.09.2005
This opens the list of (online) directories.
The provider-specific name is displayed for
the private net directory.
Select the private online directory from the list and press §OK§.
Your private online directory is opened.
Please note
If there is no other online directory available apart from the private online directory:
¤ Press s briefly. The private online
directory opens.
¤ Press and hold s. The base local
directory opens.
The entries in the online directory are sorted
alphabetically according to the first nonspace field in the entry. This is generally the
nickname or surname.
Selecting, viewing and managing
entries in the online directory
Prerequisite:
The online directory is open (see above).
¤ Scroll with s to the required entry.
Or:
Enter the first letter of the name and
scroll with s to the required entry.
¤ Press the display key §View§.
The detailed view with the complete entry
opens. You can scroll through the entry with
the control key q.
The following data is shown, if available (in
the sequence specific to the provider):
Nickname, name, first name, phone number,
mobile number, VoIP number, street, house
number, post code, town/city, company
name, business type, date of birth, e-mail.
Using other functions
§Options§
Press the display key.
You can select the following functions
with q:
Enter nickname
You can edit or delete the nickname in an
entry. Press §Save§ to save the change.
Copy to Directory
Copy an entry to the local directory
(¢ page 73).
77
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / directories.fm / 24.05.11
Using directories
Please note
You can copy numbers from a public
directory to your private online directory
(¢ page 76).
Calling up an entry in the online
directory
Prerequisite: You have opened the online
directory.
Select entry (open the details
view, if necessary).
Pick up the receiver.
If the entry only contains one phone
number, this is the one that is dialled.
If the entry contains more than one phone
number (e.g., mobile number and phone
number), they are offered to you for selection.
Select the number to be dialled.
§OK§
Press the display key.
The selected phone number is dialled.
Transferring the local directory to
the private online directory
You can save entries in the local directory in
vCard format as a vcf file on your PC with the
help of the Web configurator (¢ user guide
for the Web configurator on the enclosed
CD).
Several providers support functions on your
Web pages that you can use to copy these
files to the online directory.
Using the Gigaset.net
directory
The base is in idle status.
Press and hold.
If necessary, select Gigaset.net
from the list of available online
directories and press §OK§.
Or:
v ¢ Î Contacts ¢ Network Directory
This opens the list of online directories.
Gigaset.net
Select and press §OK§.
The Gigaset.net directory opens.
Please note
u Calls to the Gigaset.net directory are
always free of charge.
u You can also open the Gigaset.net
directory by dialling 1188#9 (phone
number of the Gigaset.net directory)
and picking up the receiver c.
If a connection to the Gigaset.net directory
cannot be made, an error message is issued
and the base goes into idle status.
Opening the Gigaset.net directory for
the first time
When you open the Gigaset.net directory for
the first time, you are asked to enter a nickname for your connection. You are entered
in the Gigaset.net directory under this name.
Own Details
Your Gigaset.net
nickname:
Abc
 ¢ §OK§ to open the
window and enter a new appointment.
u If no appointments have been entered,
the input window will open immediately
to add the new appointment.
¤ You can enter data in the following fields:
Activation:
Select On or Off.
Date:
Enter the selected date in this field.
Enter day/month/year in 8-digit format,
if necessary.
Time:
Enter hours/minutes in 4-digit format.
Text:
Enter text (max. of 16 characters). The
text appears as the appointment name in
the appointment list and is displayed on
the screen during the appointment
reminder. Text is preset as Appointment.
If Text does not contain any text, only the
date and time of the appointment are displayed.
Signal:
Select a melody with which the appointment should be signalled. If you select
Visual only, the appointment is only
shown on the display.
§Save§
Press the display key.
Signalling appointments and
anniversaries
In idle status, an appointment reminder is
signalled with the selected ringer melody
and will sound for 60 seconds. The name is
displayed for anniversaries, while the
entered text is displayed for appointments
along with the time.
ØÜ
Appointment
3:38 am
Off
You can deactivatean appointment
reminder:
§§Off§§
Press the display key to deactivate the appointment reminder.
Please note
During a call, the appointment reminder
is signalled by a short tone.
It is entered in the missed alarms list.
Please note
Version 4, 16.09.2005
If you have already saved thirty appointments, you will have to delete an existing
appointment before adding a new one.
101
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / add_features.fm / 24.05.11
Setting an appointment (calendar)
Managing appointments
Displaying missed
appointments, anniversaries
Editing individual appointments
Missed appointments/anniversaries
(page 73) are displayed in the Missed
Alarms list if:
u You do not accept an appointment/anniversary.
u The appointment/anniversary was signalled during a phone call.
The n icon and the number of new entries
are shown in the display. The most recent
entry is at the head of the list.
Open the list by pressing the message key
f (¢ page 68) or via the menu:
v ¢ Í Organizer ¢ Missed Alarms
Select appointment/
anniversary.
Information about the appointment/anniversary is displayed. A missed appointment
is shown with the appointment name
(¢ page 101), a missed anniversary with
name and surname. The date and time is
also given.
§Delete§
Delete appointment
If 10 entries are already stored in the list, the
next appointment reminder will delete the
oldest entry.
v ¢ Í Organizer ¢ Calendar
r/q
Select a day in the graphical
calendar and press the control
key w. (Days on which appointments/anniversaries have
already been saved are highlighted in orange in the calendar).
A list containing the entries for this day is displayed. Anniversaries are marked with j,
activated appointments with μ.
Select appointment/anniversary.
§§View§§
Press the display key to view the
entry.
You can only display anniversaries. You can
edit an anniversary via the directory
(¢ page 73).
With an appointment, select §Options§ for the
following options:
Edit Entry
(Similar to Saving an appointment
¢ page 100)
Delete Entry
Delete a selected appointment from the
list.
Activate / Deactivate
Activate/deactivate an appointment.
A deactivated appointment is not signalled.
Deleting all appointments
Version 4, 16.09.2005
In the monthly view:
§Options§ ¢ Delete all appoint. ¢ §OK§
Confirm the security prompt with §Yes§.
All appointments are deleted.
102
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / add_features.fm / 24.05.11
Setting the alarm clock
Setting the alarm clock
Prerequisite: The date and time have
already been set (page 123).
Activating/deactivating the alarm
clock and setting the wake-up time
Version 4, 16.09.2005
v ¢ Í Organizer ¢ Alarm Clock
¤ You can enter data in the following fields:
Status:
Select On or Off.
Time:
Enter the wake-up time in 4-digit format.
Occurrence:
Select Daily or Monday-Friday.
Volume:
Set the volume for the alarm (1–5) or crescendo ring (volume increases with each
ring = ‡).
Signal:
Select the melody for the alarm.
§Save§
Press the display key.
In the idle display header, you see the ¼
icon and the wake-up time.
A wake-up call is signalled on the display
(¢ page 4) and with the selected ringer.
The wake-up call sounds for 60 seconds.
If no key is pressed, the wake-up call is
repeated twice at five minute intervals and
then switched off.
During a call, the wake-up call is only signalled by a short tone.
Deactivating the wake-up call/
repeating after a pause
(snooze mode)
Prerequisite: A wake-up call is sounding.
§OFF§
Press the display key. The wakeup call is deactivated.
Or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after five
minutes. After the second repetition the wake-up call is deactivated completely.
103
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
Connecting/using other
devices
You can upgrade your base to a "PABX" by
connecting other communication devices.
You can register up to six handsets to your
base.
Each registered device is assigned an internal number (2–7) and an internal name
(INT 2–INT 7). You can change the number
assignment and names.
If all internal numbers have already been
assigned on your base, you must deregister
a handset that is no longer required before
registering a new one.
You can also connect an analogue fax
machine (¢ page 114, ¢ page 130) and
six Bluetooth devices (one headset and a
total of five GSM mobiles/data devices,
¢ page 108).
Registering handsets
You must register a handset on the base (1)
and on the handset itself (2).
1. On the base:
Version 4, 16.09.2005
To set the base to registration mode:
v ¢ Ï ¢ Registration
¢ Register Handset
The base's DECT interface is (assuming it is
deactivated) automatically activated as
soon as you set the base to registration
mode.
You can register the handset as long as the
display on the base shows the message
Please register your handset.
104
2. On the handset:
Within approx. 60 seconds.
¤ Start the registration procedure on the
handset in accordance with the handset's user guide.
You are asked to enter the current system
PIN of the base on your handset (default
setting: 0000).
Enter the current system PIN
and press §OK§.
After registering successfully
Handset registered is shown on the base's
display.
Please note
If six handsets are already registered to the
base (the internal numbers 2–7 are already
assigned), you have two options:
u The handset assigned the internal
number 7 is in idle status:
The handset that previously had the
number 7 is deregistered; the new handset is registered and is assigned the
internal number 7.
u The handset assigned the internal
number 7 is in use:
The handset to be registered cannot be
registered. A message to this effect is
displayed on the handset.
Assigning send and receive
connections to the handset
If several connections are configured on the
base, the connection wizard for the handset
is started automatically. This enables you to
assign send and receive connections to the
handset. For information on the connection
wizard procedure see page 31.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
Please note
All base connections are assigned to a
handset as receive connections as soon as
registration is complete. If a mobile is registered via Bluetooth, its GSM connection is
also assigned to the handsets as a receive
connection.
When connection to the analogue fixed
line is established, this connection is
assigned to the handset as a send connection.
When connection to is established, the first
MSN to be configured is assigned as a send
connection; if no MSNs have been configured, then the main number of the connection is used.
Assigning the internal number
The base assigns the lowest free internal
number to the handset (possible numbers:
2–7). The internal number is shown on the
handset display e.g., INT 2. This means that
the handset has been assigned the internal
number 2. The base is assigned the internal
number 1.
De-registering handsets
On the base:
v ¢ Ï ¢ Registration
¢ De-register Handset
The list of registered devices (internal parties) is displayed.
Select the internal party you
wish to deregister and press §OK§.
Enter the current system PIN if
necessary and press §OK§.
§Yes§
Press the display key to confirm
the prompt.
Version 4, 16.09.2005
The handset is deregistered immediately,
even if it is not in idle status.
Locating a handset (paging)
You can use the base to search for the registered handsets.
Prerequisite: There are internal parties registered on the base. There are a maximum of
two connections between the internal parties.
Open the list of internal parties.
Your own entry in the list is
marked with a < symbol.
Find Handset
Select and press §OK§.
All reachable handsets ring simultaneously
("paging"), even if the ringers are deactivated.
An external call will not interrupt the paging
process.
Ending paging
¤ Press the red end key T or pick up/
replace the receiver.
You can end the paging call prematurely by
pressing the talk or end call key on one of
the handsets.
The paging call ends automatically after
approx. 30 seconds.
Making internal calls
Internal calls using registered handsets are
free of charge.
Calling a specific handset
Initiate internal call.
Enter the number of the internal
party.
If the receiver is replaced, the base switches
to handsfree mode.
Or:
Initiate internal call.
Select the internal party.
Pick up the receiver.
105
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
If the internal party cannot be reached
(e.g., out of range) or does not answer,
or three internal connections are already
established, the busy tone sounds.
Calling all internal parties
("group call")
Press and hold left on the control key.
All handsets are called.
Or:
Initiate internal call.
Press the star key.
Or:
Initiate internal call.
Call All
Select
Pick up the receiver.
All handsets are called.
If no internal parties can be reached or three
internal connections have already been
established, the busy tone sounds.
Ending a call
Replace the receiver.
Transferring a call to a handset
You can transfer an external call to a handset
(connect).
Prerequisite: You are conducting an external call.
Version 4, 16.09.2005
Open the list of handsets.
The external participant hears
music on hold, if activated
(¢ page 122).
If more than one handset is registered:
Select a handset or Call All and
press §OK§.
When the internal participant answers:
¤ If necessary, announce the external call.
& / T Replace the receiver or press the
red end key.
The external call is transferred to the other
handset.
106
If the internal participant does not answer or
the line is busy, press the display key §End§, to
return to the external call.
You can also replace the receiver before the
internal participant picks up when transferring the call.
Then, if the internal participant does not
answer or the line is busy, the call will automatically return to you.
Initiating an internal consultation
call/conference
When you are conducting an external call,
you can call an internal participant at the
same time for consultation or hold a conference call between all three participants.
You are conducting an external call:
Open the list of handsets.
The external participant hears
music on hold, if activated
(¢ page 122).
If more than one handset is registered: select the handset and
press §OK§.
You are connected to the internal participant.
Either:
§Options§ ¢ End Active Call
You are reconnected with the
external participant.
Or:
§Conf.§
Press the display key.
All three participants are connected with each other.
If the internal participant does not answer:
¤ Press the display key §End§ to return to the
first external caller.
Ending a conference call
An internal participant pressing the end call
key (on the handset) or the red end key T
does not affect the connection between the
other internal participant and the external
participant.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
External call waiting during an
internal call
Internal call waiting during an
internal/external call
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). The caller's number or
name appears in the display if Calling Line
Identification is enabled.
If an internal participant attempts to call you
while you are involved in an external or
internal call, this call is shown on the display
(internal call waiting). You can either accept
or reject this call.
Press any key to make this prompt disappear
from the display.
You must end the current call to accept the
internal call. Then the internal call is signalled as per usual. You can accept the call.
You have the following options:
Rejecting the external call
§Reject§
Press the display key.
The call waiting tone is turned off.
You remain connected with the internal
participant.
If the call is via a VoIP or connection on the
base:
The external caller will hear the busy tone.
If the call is via the analogue fixed line connection: The call continues to be signalled
on other registered handsets.
Accepting an external call/Putting an
internal party on hold
§Accept§
Press the display key.
You are connected to the external caller.
The internal call is placed on hold.
You have the following options:
u Swap between both participants:
¤ Use q to swap between the participants.
u Speak to both participants at the same
time:
¤ Press the display key §Conf.§ to establish
the conference call. Press the display
key §EndConf§ to return to call swap
mode.
Changing the name of an
internal party
The names "INT 2", "INT 3" etc. are assigned
automatically at registration. You can
change these names. The name must be no
more than 10 characters. The modified name
will then appear in the list of internal participants.
Open list of internal participants.
Select handset.
§Options§
Open menu.
Rename
Enter/edit name.
§Save§
Press the display key.
Ending an internal call
Version 4, 16.09.2005
& / T Replace the receiver or press the
red end key.
The external call is signalled as an incoming
call on the base. You can accept the call
(¢ page 52).
107
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
Changing the internal
number of an internal party
The base is assigned the internal number
INT 1 as a default setting.
A handset is automatically assigned the
lowest free internal number from 2–7 during
registration. If all numbers are in use, then
the number 7 is overwritten as long as this
handset is in idle status. You can change the
internal number of the base and all registered handsets (1–7).
Open the list of internal parties.
Your own device is marked
with < .
§Options§
Open menu.
Assign Handset No.
Select and press §OK§.
Select the internal party.
Select a new number.
sr
Repeat the process for other
internal parties as required.
Make sure you do not assign an internal
number (1 to 7) twice.
To finish:
§Save§
Press the display key to save the
entry.
You will hear the error tone if an internal
number has been assigned twice.
¤ Repeat the procedure with a free number.
Please note
Version 4, 16.09.2005
Numbers 1 to 7 are available for selection.
Internal number 8 is reserved for any fax
machine connected to the FAX port.
108
Using Bluetooth devices
Your base can use Bluetooth™ to communicate wirelessly with other Bluetooth devices.
You can use Bluetooth to register the following devices on your base:
u One Bluetooth headset
u Up to five Bluetooth GSM mobiles or data
devices (PC, PDA).
Before you can use your Bluetooth devices,
you must first activate Bluetooth and then
register the devices to the base.
To use the phone numbers, dialling codes
(country and area code) must be stored on
the base (page 124).
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Activating/deactivating Bluetooth
mode
v ¢ ò Bluetooth
Activation Select and press §Change§ to activate or deactivate Bluetooth
mode (³ = activated).
When the base is in idle status, the ò icon in
the header indicates that Bluetooth mode is
activated (¢ page 4).
As soon as Bluetooth is activated, your base
is visible to all Bluetooth devices in the
receiving range (maximum 10 m) and can
communicate with all of the devices
included in the "known devices" list.
Alternatively, you can assign Bluetooth interface activation to a display or function key
on the base (¢ page 116). This then allows
you to activate/deactivate Bluetooth at the
push of a button.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
Registering Bluetooth devices
Cancelling/repeating current search
To register a Bluetooth device, you need to
search for it and then add it to the list of
known devices.
The list of known devices can hold a maximum of one headset and five data devices/
mobiles.
Cancel the search:
§Cancel§
Press the display key.
Repeat search if necessary:
In the known devices list:
§Options§
Press the display key.
Repeat Search
Select and press §OK§.
Please note
u If you register a headset, any headset
that is already registered will be overwritten.
u If you would like to use a headset
already registered to another device
(e.g., a mobile) with your base, please
deactivate this connection before
you start the registration process.
u Depending on the Bluetooth profiles
supported by your mobile, it can be
registered as a data device and a
mobile.
Searching for Bluetooth devices
The distance between the base in Bluetooth
mode and the activated Bluetooth device
(headset, mobile or data device) should be
no more than 10 m.
Any incoming calls are ignored during the
search.
v ¢ ò Bluetooth ¢ Search for Headset
/ Search for Cell Phone /
Search for Data Device
Bluetooth mode is activated automatically
on the base if it is not already active. The
search is started. This can take up to
30 seconds.
The Bluetooth names of the devices found
are displayed in a list (abbreviated if necessary). If no name has been assigned to a
device, the device address is shown.
Version 4, 16.09.2005
Please note
The Search for Data Device function will
list all Bluetooth devices found with the
exception of headsets (list includes
multi-service devices).
Displaying the name and address of
a device found
In the list of devices found:
Select entry.
§View§
Press the display key.
The device name and address are displayed.
Press §OK§ to return to the list.
Adding the data device/mobile to the
known devices list
In the list of devices found:
Select the device to be registered.
§Options§
Press the display key.
Trust Device
Select and press §OK§.
If the list of known devices contains fewer
than five data devices and mobiles:
Enter a PIN of your choice or the
PIN of the Bluetooth device to
be registered and press §OK§.
Generally you can enter a PIN of your choice
for a data device/GSM mobile. You must also
enter this PIN in the data device/mobile
(handshake).
The device is saved in the list of known
devices.
If the list of known devices already contains
five data devices/mobiles, then the PIN
prompt is preceded by the message Select
device to be replaced and trust again.. You
must select a device from the list to be
replaced by the new device before registration.
109
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
¤ If you press the display key §No§, the device
is not registered and the base returns to
the list of found devices.
¤ If you wish to replace a device in the list,
press the display key §Yes§. A list of the registered (known) data devices and mobiles
is displayed.
¤ Select the device to be replaced and
press the display key §OK§.
You will need to enter a PIN to register the
new device (see above).
If the new device fails to register, the list of
known devices will remain unchanged.
Adding a headset to the known
devices list
In the list of devices found:
Select headset.
§Options§
Press the display key.
Trust Device
Select and press §OK§.
If the headset transfers the PIN 0000 (the PIN
usually set on a headset), the headset is
directly added to the list of known devices. A
previously registered headset is automatically de-registered.
If the headset transfers a PIN other than
0000, you are asked to enter the PIN on the
base.
Enter the PIN and press §OK§.
The device is saved in the list of known
devices.
Please note
u The known devices list can only con-
Version 4, 16.09.2005
tain one Bluetooth headset. If you
register a second headset, the first
one is deleted from the list.
u A multi-service device can be registered as a headset and a data device.
110
Editing the list of known (trusted)
devices
Open list
v ¢ ò Bluetooth
Known Devices
Select and press §OK§.
The list of known devices is displayed.
The names in the list are accompanied by
icons with the following meanings:
Icon
Meaning
ô
õ
Bluetooth headset
Bluetooth data device
Bluetooth mobile
When a Bluetooth device is registered, all
Bluetooth profiles supported by this device
are saved (not just the profile that was
searched for).
This means, for example, that a registered
mobile can be saved as a data device and a
mobile in the list of known devices. Its name
is preceded by two icons: l and õ. You can
therefore use this Bluetooth connection to
access the mobile's GSM line and also to
exchange vCards with the mobile. The negotiated PIN is valid for all types of Bluetooth
communication.
Viewing entries
Open the list ¢ s (select entry)
§View§
Press the display key.
The device name and address are displayed.
Go back with §OK§.
De-registering Bluetooth devices
Open the list ¢ s (select entry)
§Options§
Press the display key.
Delete Entry
Select and press §OK§.
Bluetooth is activated, if necessary.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
Please note
u If you de-register an activated Blue-
tooth device, it may try to reconnect
as an "unregistered device".
u If you de-register the activated
mobile (¢ page 110), no other
mobile from the list will be activated.
Entering/editing the name of a
Bluetooth device
Open the list ¢ s (select entry)
Either:
§Options§
Press the display key.
Rename
Select and press §OK§. Bluetooth
is activated, if necessary.
Or:
§View§
Press the display key.
§Edit§
Press the display key.
Then:
Enter/edit name.
§Save§
Press the display key.
The name is changed locally on the base. It is
not changed on the Bluetooth device.
Activating a registered mobile
Version 4, 16.09.2005
You can register up to five mobiles via Bluetooth. However, only one mobile can connect to the base: the activated mobile.
Activated means:
u If the base is in Bluetooth mode, the
mobile can establish a Bluetooth connection with the base (e.g., in the event of an
incoming call).
u The base establishes a connection with
this mobile when attempting to make a
call via a GSM connection.
Once registration is complete, the last
mobile to be registered is activated automatically. The previously activated mobile is
deactivated.
You can activate any other mobile from the
list of known devices.
Open list ¢ s (select mobile)
§Options§
Press the display key.
Connect Cell Phone
Select and press §OK§.
Bluetooth is activated on the base if it is not
already active. The base connects to the
mobile.
The selected mobile is activated. Its entry in
the list of known devices is marked with μ.
The previously activated mobile is deactivated.
Display in the base's idle display
If a headset or Bluetooth mobile is connected to the base, the corresponding icon
(ô, l) together with ò (= Bluetooth activated) is shown in the display header.
Rejecting/accepting an
unregistered Bluetooth device
If a Bluetooth device that is not registered in
the list of known devices tries to connect
with the base, you are prompted on the display to enter the PIN for the Bluetooth
device (bonding).
u Reject
Briefly press the red end key.
u Accept
Enter the PIN for the Bluetooth
device you want to accept and
press §OK§.
If you accept the device, you can use it
temporarily (i.e., as long as it is within
receiving range and Bluetooth is activated) or add it to the list of known
devices.
Following PIN confirmation:
¤ Press the display key §Yes§ to add the
device to the list of known devices.
Or:
¤ Press the display key §No§ to use the device
temporarily.
111
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
Please note
u If you only accept the registration of a
headset on a temporary basis, the
headset is not deleted from the
known devices list.
u If the list of known devices already
contains five data devices/mobiles,
you will be asked to delete a device
from the list first (¢ page 109).
Changing the Bluetooth name of
the base
You can change the base name used to identify it on the display of another Bluetooth
device.
v ¢ ò Bluetooth ¢ Own Device
The device name and address for the base
are displayed.
§Change§
Press the display key. Bluetooth
is activated, if necessary.
Change the name.
§Save§
Press the display key.
Using a Bluetooth headset
Please note
u You can operate headsets on your
handset that have the headset or
handsfree profile. If both profiles are
available, the handsfree profile is used
to communicate.
u Calls can only be initiated from the
base.
Setting the Headset function key
If you want to make calls on your base via a
headset, you must first assign a function key
on the base to the Headset function
(¢ page 116).
Version 4, 16.09.2005
Recommendation
If your headset has a push-to-talk key, we
recommend that you use the Headset
function key for transfer/pickup as well.
112
Accepting/transferring calls on the
headset
Prerequisite: Bluetooth is activated; a connection has been established between the
Bluetooth headset and the base
(¢ page 108).
u You are talking on the base or
u You are trying to connect to another
party or
u A call is being signalled on the base
¤ Press the Headset function key on the
base to accept the call on the headset.
Please note
For instructions on adjusting the speaking volume on your headset,
¢ page 119.
Calling
¤ Enter the phone number on the base and
press the Headset function key on the
base.
Using data devices
Prerequisite: Bluetooth is activated.
The data device is in the list of known
devices (marked with õ, ¢ page 109)
or temporarily connected to the base
(¢ page 111).
You can establish a Bluetooth connection to
the base using a PC, PDA or even a mobile (as
a data device).
You can then, for example, exchange directory entries with the data device in the form
of vCards, compare the PC's directory with
the directory on the base, load ringer settings or screensavers from the data device to
the base's resource directory or use AT commands to make outgoing calls and accept
incoming calls.
The phone is supplied with QuickSync software for the PC (¢ page 150). You will find
it on the enclosed CD.
QuickSync provides PC functions via a
graphical interface.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
Please note
For instructions on sending vCards to a
Bluetooth device or receiving them from
a Bluetooth device, see page 72.
Using GSM mobiles (Link2mobile)
Version 4, 16.09.2005
You can conduct calls on your base and/or a
registered handset via the GSM connection
on your Bluetooth GSM mobile (call external
parties via the GSM connection on the
mobile or accept calls via the GSM connection) if the following prerequisites are met:
u Bluetooth mode is activated on the base
and mobile (¢ page 108).
u Your GSM mobile has been registered
(¢ page 109) on the base and activated
(¢ page 111).
u There is a Bluetooth connection established between the base and mobile.
u The mobile is in range of the base (less
than 10 m).
u For outgoing calls: The mobile connection is assigned to the base as a send
connection, or the base can select the
GSM connection as a send connection
(¢ page 128).
u For accepting incoming calls: The GSM
connection is assigned to the base as a
receive connection (¢ page 128).
A connection is automatically established
between the base in Bluetooth mode and
the activated mobile in range:
u If a call arrives via the mobile's GSM connection (¢ page 53)
u If you attempt to make a call on the base
via the GSM connection (¢ page 51)
If Bluetooth mode is deactivated on the
base:
¤ Open the list of known devices.
¤ Select the activated mobile (marked
with μ).
¤ Press the display key §Options§.
¤ Select Connect Cell Phone and press §OK§.
Bluetooth is activated on the base. The base
connects to the mobile.
Please note
u You can also assign this function to a
function key on the base,
¢ Connect Cell Phone on
page 116.
u If the mobile is taken beyond the
Bluetooth range of the base, you
should re-establish the connection
between the two as soon as the
mobile is within range again. This will
ensure that a GSM call either to the
base or from the base using the GSM
connection is transferred.
Establishing a manual connection:
¤ Select the mobile from the list of
known devices.
¤ Select §Options§ ¢ Connect Cell
Phone and press §OK§.
Or:
¤ Press the function key Connect
Cell Phone.
Simultaneous Bluetooth
connections
Your base can connect to both a headset and
a data device/mobile via Bluetooth at the
same time.
However, please note the following:
u The Bluetooth menu cannot be opened
on the base.
u You can use the headset and at the same
time use a mobile/data device to initiate,
accept or manage a call.
u You cannot use the headset while transferring data via Bluetooth.
113
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
Connecting a fax machine
You can connect an ITU-T Group 3 fax
machine to the base via the FAX port.
You do not explicitly have to register the fax
machine to the base. It is automatically "registered", once you activate the FAX port on
the base (¢ page 130, default setting is
"off").
Once the FAX port is switched on, the fax
machine is added to the list of internal parties with the internal name INT 8.
The fax machine is assigned all of the base's
numbers as receive connections. The first
number from the configuration is assigned
as a send connection. You can change the
assignment (¢ page 128).
Please note
1. Insert one end of the fax connection cable from the rear into the recess in the
housing.
2. Plug the jack into the fax port on the base
(labelled: FAX).
3. Connect the fax connection cable to the
port on the fax machine.
Version 4, 16.09.2005
Please note
When connecting a multifunction device
(fax/phone) to the FAX port, you must
observe the following:
u There is no ringing tone when you
pick up.
u CLIP (¢ page 53) is not supported
for incoming calls.
u If the answering machine takes a call
on the device's receive connection, it
continues to ring.
u If the device's receive connection is
assigned neither to the base nor a
handset, calls are not transferred to
the call lists.
u Internal functions such as "internal
consultation call during an external
call" or "internal transfer" are not supported.
114
If a number is only assigned to the fax
machine as a receive connection, then
calls to this number will not be entered in
the call lists (it is not possible to read the
entries from the base or a handset).
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / HS_and_other_Devices.fm / 24.05.11
Connecting/using other devices
Connecting and using a
wire-bound headset
You can connect a headset to the base using
a 2.5 mm jack connector.
For details about your headset, see the
accompanying user guide.
Connecting the headset
¤ Before you connect the headset, assign
the Headset function to a function key on
the base (¢ page 116).
¤ Next, plug the jack connector on your
headset into the connection socket on
your base (¢ page 12).
Please note
u You should still use the Headset func-
tion key if your headset has a P2T key.
u For instructions on adjusting the
speaking volume on your headset,
¢ page 119.
u If a Bluetooth headset is also registered with the base and it is in range,
the call/connection is transferred to
the Bluetooth headset. The Bluetooth
headset takes priority.
Calling
¤ Enter the phone number on the base and
press the Headset function key.
Accepting/transferring calls on the
headset
Version 4, 16.09.2005
Prerequisite:
u You are talking on the base or
u You are trying to connect to another
party or
u A call is being signalled on the base
¤ Press the function key Headset on the
base to accept the call on the headset.
115
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Setting up the base
Setting up the base
Your base is preconfigured but you can
change the settings to suit your individual
requirements.
The settings described in this chapter only
have a local effect on the base. The corresponding setting on any of the registered
handsets does not change.
Accessing functions and
numbers quickly
You can program the six function keys on the
right-hand side of the base and the display
keys (in idle status). You can assign a phone
number (quick dial) or a base function to
each of these keys and change the assignment.
The number is then dialled or the function
started by simply pressing a key.
Changing key assignments
Version 4, 16.09.2005
In idle status:
¤ Press and hold the display/function key
until a list of possible key assignments is
displayed.
The following functions are available:
Quick Dial
Assign a number from the local directory
to the key.
The directory is opened.
¤ Select an entry and press §OK§.
If you delete or edit the entry in the directory, this will not affect the assignment to
the function key or display key.
This means that if the phone number
changes, you must re-assign the updated
entry from the directory to the key as
described above.
116
Alarm Clock
Assign menu for setting and activating
the alarm clock to a key (¢ page 103):
v ¢ Í Organizer ¢ Alarm Clock
Calendar
Open calendar/enter new appointment
(¢ page 100):
v ¢ Í Organizer ¢ Calendar
Bluetooth
Activate/deactivate Bluetooth mode
(¢ page 108).
Connect Cell Phone
Activate Bluetooth on the base and
establish a connection to the active
Bluetooth mobile (¢ page 111).
Headset
Accept or pick up a call with the connected headset. The key simulates the
P2T function (push-to-talk). You must
assign Headset to a key if you wish to use
a headset without P2T (wire-bound or via
Bluetooth).
Press the key
– If a call is signalled on the base and
you wish to accept the call directly on
the headset.
– To continue a call on the headset that
has been started on the base.
If two headsets are connected to the
base, a wire-bound and a Bluetooth
headset, the Bluetooth headset takes priority. In that case you cannot use the
wire-bound headset.
Insert P
Key inserts a dialling pause (a P) when
entering a number (¢ page 134).
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Setting up the base
Version 4, 16.09.2005
R Function
Analogue fixed line: Key inserts a recall
(an R) when entering a number
(¢ page 134).
VoIP connections: You can assign the
R function via the Web configurator
(Web page Advanced Settings):
– Connect two external callers with one
another (after a consultation call,
when call swapping)
Or
– With a provider-specific feature for the
VoIP connection
Refer to the Web configurator's user
guide on the enclosed CD.
More Functions...
More features are available:
u Send Connection
Assign an alternative send connection to
a key.
¤ Select an MSN from the MSN list as
(another) send connection for the
base and press §OK§.
Press this display or function key if the
alternative send connection should be
used (temporarily) for the subsequent
call (instead of the send connection for
the base).
u Line Selection
Assign the list of configured connections
to a key.
Select the send connection for the next
call from the list (¢ page 50).
u Call Lists
Assign the call list menu to a key
(¢ page 66).
v ¢ Ê Call Lists
u Withhold Number
Withhold Calling Line Identification for
the next call (¢ page 61).
u Call Divert
Assign menu for setting and activating/
deactivating call divert to a key
(¢ page 58):
Prerequisite: The VoIP provider supports
call divert.
v ¢ Ç Select Services ¢ Call Divert
u E-mail
Opens the e-mail submenu for receiving
and reading e-mail notifications
(¢ page 83):
v ¢ Ë Messaging ¢ E-mail
Info Center
Start Info Centre and open the list of
available information services
(¢ page 86):
v ¢ Additional Features
¢ Info Center
Display key assignment: The selected function or the corresponding directory name
for the phone number (or its abbreviation if
necessary) is displayed in the lowest display
line above the display key.
Function key assignment: You can make a
note of the key assignment on the insert
strip next to the respective key.
Starting the function, dialling the
number
When the base is in idle status:
¤ Briefly press the function or display key.
Depending on the key assignment:
u A number (Quick Dial) is dialled directly.
u Menu or function list is opened.
117
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Setting up the base
Changing the display
language
You can view the display texts in different
languages.
v ¢ Ï Settings ¢ Language
The current language is indicated by a Ø.
Select a language and
press §Select§.
The selected language is set immediately.
If you accidentally choose a language you do
not understand:
v*#Q3#
Press keys in sequence.
Select the correct language.
§Select§
Press the right display key.
Setting the display
Setting the screensaver/slideshow
Version 4, 16.09.2005
You can display a screensaver when the base
is in idle status.
You have the following options:
u A picture from the Screensavers folder in
the Resource Directory (¢ page 122)
u All pictures from the Screensavers folder
in the Resource Directory displaying one
after the other in the form of a Slideshow
u Date and time as a digital display
(Digital Clock)
u Analogue time
(Analog Clock – clock-hand display)
u Information from an info service (Info
Services – weather information, horoscope etc.). You must have activated the
display of info services via the Web configurator.
The base must be connected to the Internet to display info services.
118
The type of info service available to your
base is set on the Internet on the
Gigaset.net server. You can change the
settings via your PC web browser
(see user guide for the Web configurator;
Info Services).
If no information is currently available,
the digital time (Digital Clock) is displayed instead until information is available again.
Together with the information, display
keys that open the Info Centre selection
menu can be shown.
The screensaver replaces the idle status display. It will conceal the calendar, date, time
and name.
The screensaver is not displayed in certain
situations e.g., during a call and when a status message is displayed.
If a screensaver is activated, the Screensaver
menu option is marked with ³.
v ¢ Ï Settings ¢ Display
¢ Screensaver
The current setting is displayed.
¤ You can enter data in the following fields:
Activation:
Select On (screensaver is displayed) or
Off (no screensaver).
Selection:
Select screensaver with r or
§View§
Press the display key. The active
screensaver is displayed.
Select screensaver and
press §OK§.
§Save§
Press the display key.
The screensaver is activated approx. 10 seconds after the display has changed to idle
status.
If the screensaver conceals the display,
briefly press the red end key T to show
the idle display.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Setting up the base
Activating/deactivating the info
ticker
You can display text information from the
Internet (weather information etc.) that is set
for the screensaver Info Services as a scrolling message in the idle display. The scrolling
message is shown in the bottom line of the
idle display (immediately above the display
keys). The end of one set of information and
beginning of the next are separated by
"+++".
If, for example, you have set the calendar to
be shown in the idle display, the information
ticker overwrites the last two lines (weeks) of
the calendar.
v ¢ Ï Settings ¢ Display
¢ Info Ticker (³= on)
The ticker starts as soon as the telephone
changes to idle status. If, however, a message is shown in the idle display, the information ticker is not displayed.
Setting the brightness and time
control for the display backlight
Version 4, 16.09.2005
You can set the brightness of the display on
your base and specify a timeframe during
which the display is completely deactivated
e.g., at night.
If the display backlight is deactivated, it can
be reactivated by pressing any key or by an
incoming call. The display backlight is deactivated again after approx. 30 seconds after
the last press of a key.
v ¢ Ï Settings ¢ Display
¢ Backlight
The current setting is displayed.
¤ You can enter data in the following fields:
Time Control
Prerequisite: The date and time have
already been set.
Select On or Off.
The following fields are displayed when
Time Control = On.
Display off from:
Enter the time in 4-digit format when the
backlight should be deactivated in idle
mode.
Display off until:
Enter the time in 4-digit format when the
backlight should be reactivated.
Brightness:
Set the brightness of the display backlight with r.
You can select from five brightness levels
(1 = low – 5 = very bright; e.g., brightness
level 3 = Š).
¤ Press the display key §Save§.
Changing the handsfree/
receiver volume
You can set the handsfree volume and the
receiver volume, as well as the volume of a
connected wire-bound headset to five different levels.
In idle status
v ¢ ÏSettings ¢ Audio Settings
¢ Call Volume
You will hear a test tone.
Set the receiver volume.
Scroll to the Speaker: line.
Set the handsfree volume.
§Save§
Press the display key to save the
setting.
During a call
You can adjust the volume during a call
using the R and S keys. Each time
you press the key, the volume will increase or
decrease by one level.
§Save§
Press the display key if necessary to save the setting permanently.
119
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Setting up the base
Setting ringers
u For external calls to the GSM connection
of a mobile registered via Bluetooth
(¢ page 108); the Bluetooth name of
the mobile is shown subsequently for the
GSM connection
Setting the volume
You can choose between five volumes (1–5;
e.g., volume 3 = Š) and the "crescendo"
ringer (6; volume increases with each ring =
‡).
You can set different volumes for the following functions:
u For Internal Calls and Appointments
(Appointments ¢ page 100)
u For external calls
v ¢ ÏSettings ¢ Audio Settings
¢ Ringer Settings ¢ Volume
If necessary, set the volume for
internal calls and appointment
notification.
Scroll to the next line.
If necessary, set the volume for
external calls.
§Save§
Press the display key to save the
setting.
When choosing the setting, the ringer will
sound in the volume currently selected.
Please note
You can also use the R and S keys
to change the volume while an incoming
call is being signalled on the base.
Setting the ringer melody
Version 4, 16.09.2005
You can select various ringers, melodies or
any sound from the resource directory
(page 122).
You can set different ringers for the following functions:
u For Internal Calls
u For external calls to each individual
receive connection on the base
(Fixed line or MSN1 to MSN10, IP1 to IP6,
Gigaset.net)
120
Please note
You can only set ringer melodies on the
base for receive connections assigned to
the base.
In idle status:
v ¢ Ï Settings ¢ Audio Settings
¢ Ringer Settings ¢ Melodies
Select For Internal Calls or a
receive connection.
Select the melody for this connection.
sr
Where necessary, select the
next connection and set a melody etc.
§Save§
Press the display key to save the
settings.
Or:
You can set the ringer melody so it is used for
both internal and all external calls.
Select All calls.
Select melody.
§Save§
Press the display key.
§Yes§
Press the display key to confirm
the settings.
The setting for all calls will not work as soon
as you change the setting for an individual
connection.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Setting up the base
Setting time control for external
calls
You can specify a time period when you do
not want the base to signal external calls
e.g., during the night.
Prerequisite: The date and time have
already been set.
v ¢ Ï ¢ Audio Settings
¢ Ringer Settings ¢ Time Control
¤ You can enter data in the following fields:
For external calls:
Select On or Off.
The following fields only appear when For
external calls = On.
Suspend ring from:
Enter the start of the period in 4-digit format.
Suspend ring until:
Enter the end of the period in 4-digit format.
¤ Press the display key §Save§.
Please note
During this period, you will continue to
receive calls on the base from numbers
to which you have assigned a personalised melody in the directory (VIP).
Silencing the ringer for
anonymous calls
Activating/deactivating the ringer
You can deactivate the ringer on your base
before you answer a call or when the base is
in idle status; the ringer can be deactivated
permanently or just for the current call.
The ringer cannot be re-activated while an
external call is in progress.
Deactivating the ringer permanently
Press and hold the star key.
The ó icon appears in the display.
Reactivating the ringer
Press and hold the star key.
Deactivating the ringer for the
current call
§Silence§
Press the display key.
Activating/deactivating alert tones
In place of the ringer, you can activate an
alert tone. When you receive a call, you will
hear a short tone ("Beep") instead of the
ringer.
Press and hold the star key and
within 3 seconds:
§Beep§
Press the display key. A call will
now be signalled by one short
alert tone.
ñ appears in the display.
Version 4, 16.09.2005
You can set the base to not ring when external callers cannot be identified (anonymous
call).
v ¢ Ï Settings ¢ Audio Settings
¢ Ringer Settings
Anon. Call Silencing
Select and press §Change§.
If the ringer is silenced for anonymous calls,
then Anon. Call Silencing is marked
with ³.
121
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Setting up the base
Activating/deactivating
advisory tones
Your handset uses advisory tones to tell you
about different activities and statuses. The
following advisory tones can be activated/
deactivated independently of each other:
u Key click: every key press is confirmed.
u Acknowledge tones:
– Confirmations (ascending tone
sequence): At the end of an entry/setting and when a new entry arrives in
the answering machine list or call list
– Error tone (descending tone
sequence): When you make an incorrect entry
– Menu end tone: when scrolling to the
end of a menu
In idle status:
v ¢ Ï Settings ¢ Audio Settings
¢ Advisory Tones
¤ You can enter data in the following fields:
Key Tones:
Select On or Off.
Confirmation:
Select On or Off.
§Save§
Press the display key.
Activating/deactivating
music on hold
Version 4, 16.09.2005
Music on hold is played e.g., during a call
swap or consultation call to a caller with
whom you are not actively connected.
v ¢ Ï Settings ¢ Audio Settings
¢ Music on Hold
¤ Press the display key §Change§ to activate or
deactivate music on hold (³= on).
122
Resource directory
The resource directory manages sounds/
melodies, which you can use as ringers, and
pictures (CLIP pictures and screensavers),
which you can use as caller pictures or as
screensavers. Prerequisite: Calling Line Identification (CLIP). The resource directory can
manage the following media types:
Type
Format
Sounds
G.722 raw
Pictures
BMP, JPG,
Non-animated GIF
190 x 144 pixels
240 x 320 pixels
each with a 24-bit colour
depth
– CLIP picture
– Screensaver
Please note
The Gigaset QuickSync PC software converts all the standard formats (MP3,
WMA, TIFF) into formats supported by
the base (see above) and adjusts the
image resolution to the resource directory.
Your base has a variety of default sounds and
pictures.
You can play the available sounds and view
the pictures.
You can download some pictures and
sounds from a PC with the Gigaset QuickSync software (¢ page 150). If there is not
enough capacity available, you must first
delete one or more pictures or sounds.
Viewing screensaver/caller
pictures
v ¢ ÉAdditional Features
¢ Resource Directory ¢ Screensavers /
Caller Pictures ¢ (select entry)
§View§
Press the display key. The
selected picture is displayed.
Switch between pictures using
the q key.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
If you have saved a picture in an invalid file
format, you will see an error message after
selecting the entry.
Playing back sounds
v ¢ É Additional Features
¢ Resource Directory ¢ Sounds
¢ (select entry)
The selected sound is played back immediately. Switch between the sounds using
the q key.
You can adjust the volume during playback:
¤ Adjust the volume using the R / S
keys and pressing the display key §Save§.
Deleting/renaming a picture/
sound
You have selected an entry.
§Options§
Open menu.
You can select the following functions:
Delete Entry
The selected entry is deleted.
Rename
Change the name (max. 16 characters)
and press §Save§. The entry is stored with
the new name.
If a picture/sound cannot be deleted, these
options are not available.
If you delete a sound that is being used as
the ringer melody, the default melody will
be used instead.
If you delete a picture that is being used
as the caller picture or screensaver, the
Digital Clock will be displayed instead.
Checking the capacity
Version 4, 16.09.2005
You can check how much capacity is available for sounds and pictures.
v ¢ É Additional Features
¢ Resource Directory ¢ Capacity
Configuring the system
settings
You can make the following settings via the
menu on the base, on a registered
Gigaset SL78H, SL400H, S79H handset or via
the Web configurator on the base.
The following steps are carried out using the
base.
The majority of the settings can also be
made via a registered Gigaset SL78H,
SL400H or S79H handset. The procedure is
similar to that on the base, although the
menu structure is slightly different.
Instructions on operating via the base's Web
configurator can be found in the user guide
on the enclosed CD.
Setting the date and time
manually
To ensure you have the correct time for
incoming calls and to use the alarm clock
and calendar, the date and time must be set.
Please note
The address of a time server on the Internet
is stored on your base. The date and time
are taken from this time server provided
that the base is connected to the Internet
and synchronisation with the time server is
activated. Manual settings are overwritten
in this case.
If the date and time on the base have not yet
been set, the §Time§ display key appears.
§Time§
Press the display key.
Or:
v ¢ Ï Settings ¢ Date/Time
123
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
¤ You can enter data in the following fields:
Date:
Enter day, month and year as an 8-digit
number via the keypad. e.g., QM
42Q
for 07/14/2011.
Time:
Enter the hours and minutes in 4-digit
format via the keypad, e.g.,
QM
5 for 07:15 am.
¤ If necessary, press the display key §am/pm§
to switch between am and pm.
¤ Press the display key §Save§ to save
the settings.
Protecting against
unauthorised access
Protect the base system settings with a PIN
known only to you. You have to enter the
system PIN if you register or de-register a
handset, change local network settings, perform a firmware update or reset the phone
to default settings.
Setting your own area code
To transfer phone numbers (e.g., in vCards),
it is essential that your area code (international and local area code) is saved on the
base.
Some of these numbers are already preset.
v ¢ Ï Settings ¢ Telephony
¢ Area Codes
Check that the (pre)set area code is correct.
¤ You can enter data as follows:
Select/change input field.
Navigate in the input field.
Ñ
If necessary, delete number:
Press the display key.
Enter number.
§Save§
Press the display key.
Example:
Area Codes
International code:
00 - 1
Local area code:
Changing the system PIN
Version 4, 16.09.2005
You can change the base's 4-digit system PIN
(default setting: 0000) to a 4-digit PIN known
only by you.
Setting a system PIN facilitates remote operation of the answering machine
(¢ page 95).
v ¢ Ï Settings ¢ System
¢ System PIN
If necessary, enter the current
system PIN for the base and
press §OK§.
Enter new system PIN.
§OK§
Press the display key.
124
0-[
Info
Save
Please note
It is especially necessary to set the international code if you connect a GSM
mobile to the base via Bluetooth. Phone
numbers transferred from the GSM network always include the international
access code, even for calls within a country.
If, for example, you later wish to call back
the caller from a call list via one of your
phone's connections, the international
code is withheld for national phone calls.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
Setting the base's IP address
in LAN
Prerequisite: Your base is connected to a
router or a PC (¢ page 16).
An IP address is required in order for the LAN
to "recognise" your base.
The IP address can be assigned to the base
automatically (by the router) or manually.
u If done dynamically, the router's DHCP
server automatically assigns an IP
address to the base. The base's IP address
can be changed according to router settings.
u If done manually/statically, you assign a
static IP address to the base. This may be
necessary depending on your network
configuration (e.g., if your base is connected directly to a PC).
You can also make local network settings via
the Web configurator.
Please note
Version 4, 16.09.2005
To assign the IP address dynamically, the
DHCP server on the router must be activated. Please also read the user guide for
your router.
v ¢ Ï Settings ¢ System
¢ Local Network
Enter the current system PIN if
necessary and press §OK§.
¤ You can enter data in the following fields:
IP Address Type
Select Static or Dynamic.
For IP Address Type Dynamic:
The following fields show the current settings that the phone obtained from the
router. These settings cannot be
changed.
For IP Address Type Static:
You must manually define the IP address
and the subnet mask for the base in the
following fields, as well as the standard
gateway and DNS server.
For IP Address Type Static:
IP Address
Enter the IP address that is to be assigned
to the base (overwriting the current settings).
192.168.2.1 is the default setting.
For information on the IP address,
see the glossary on page 166.
Subnet Mask
Enter the subnet mask to be assigned to
the base (overwriting the current settings).
The default setting is 255.255.255.0
For information on the subnet mask,
see the glossary on page 170.
DNS Server
Enter the IP address for the preferred DNS
server. The DNS server (Domain Name
System, ¢ page 163) converts the symbolic name of a server (DNS name) into
the public IP address for the server when
the connection is made.
You can specify your router's IP address
here. The router forwards base address
requests to its DNS server.
192.168.2.1 is the default setting.
Default Gateway
Enter the IP address for the standard
gateway (¢ page 165) through which
the local network is connected to the
Internet. This is generally the local (private) IP address for your router (e.g.,
192.168.2.1). Your base requires this information to access the Internet.
192.168.2.1 is the default setting.
¤ Press §Save§ to save the settings.
Please note
You can also make the settings for the
local network via the Web configurator
(¢ operating instructions for the Web
configurator on the enclosed CD).
125
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
Setting up/deleting
connections (MSNs)
Prerequisite: Your base is connected to the
network.
Your connection offers you two telephone
lines (B channels) that you can use simultaneously. You can set up a maximum of ten
separate phone numbers (MSNs) on your
base. You are assigned these phone numbers by your network provider.
Please note
Version 4, 16.09.2005
There are several ways of assigning an
MSN to extension systems. For more
information on this topic, refer to the
user guide belonging to your extension
system.
If you have not yet stored all the numbers
with the installation wizard (¢ page 20),
you can enter them now. You can start the
wizard at any time via the menu to change
the configuration.
All numbers that are stored retrospectively
are automatically assigned to the base, all
registered handsets and answering
machine 1 as receive MSNs.
Each new number you set up is automatically given its own ringer, which you can
change individually (¢ page 120).
You can set up, edit and delete MSNs with
the help of the wizard.
In idle status:
v ¢ ÏSettings ¢ Connection Wizard
¢ ISDN
§Yes§
Press the display key to launch
the wizard.
§OK§
Press the display key to confirm
the info text.
A list of MSNs already set up is then displayed.
§Change§
Press the display key to set up
additional MSNs or modify the
settings for an existing MSN.
126
Setting up a new MSN
Select the row MSN - Name of
an empty MSN entry.
Enter MSN name (max. 16 characters) (optional).
Jump to the corresponding
MSN - Number line.
Enter MSN number (max. 20 digits; without area code = prefix).
¤ Repeat this process for other MSNs, if
required.
¤ Press the display key §Save§ to save the
changes.
Once the wizard is complete, the connection
wizard starts automatically. This enables you
to assign send and receive connections to
the base's internal parties (¢ page 31).
Please note
If you do not set up any MSNs, all calls
will be made on the main number of
your connection. ISDN is shown for this
connection in the lists for selecting the
send and receive connections
(¢ e.g., page 128, page 93).
Changing/deleting an MSN
Select the MSN - Name / MSN Number for the MSN entry that
you wish to edit.
Ñ
Delete the previous name/
number.
Enter the new MSN name/
number, if required.
¤ Repeat this process for other MSNs, if
required.
¤ Press the display key §Save§ to save the
changes.
If you have deleted both the MSN name and
number and not entered any new values, the
MSN is deleted.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
If the MSN you have deleted was the send
connection (page 104) of an internal party
then a new send connection (the MSN with
the lowest ranked number) will automatically be assigned to this internal party.
Configuring VoIP
connections
Each time you run the IP wizard you can
configure/reconfigure one VoIP connection
(IP account).
¤ Restart the IP wizard if you wish to configure/reconfigure another VoIP connection.
Automatic update for the VoIP
provider settings
You can configure up to six VoIP connections
on your telephone, i.e., you can assign up to
six VoIP phone numbers to your phone.
You need to set up an IP account (VoIP
account) with a VoIP provider for each connection. You must save the access data for
this IP account on your phone. The IP wizard
will help you to do this.
Starting the IP wizard:
If your base is connected to the Internet and
, start the IP wizard as follows:
v ¢ ÏSettings ¢ Connection Wizard
¢ VoIP
If your base is connected to the Internet and
analogue fixed line, start the IP wizard as follows:
v ¢ ÏSettings ¢ VoIP Wizard
In both cases you will see the following
question in the display:
After the first download of the VoIP provider
settings, your phone will check daily
whether a newer version of the file for your
VoIP provider is available from the Internet
on the configuration server. If there is an
update available, the message New profile
available. Update? is displayed in the idle
display of the base.
§Yes§
Press the display key to confirm
the prompt.
Enter the system PIN if necessary and press §OK§.
The new data for your VoIP provider will be
downloaded and saved on the phone.
If you answer the prompt with §No§, the
phone returns to idle status. Your telephone
will not remind you of this new profile again.
The message will only be shown again if a
newer version of the provider data is available.
A profile update will only be started if no
other profile or firmware update is taking
place at the time.
IP Wizard
Start IP
installation wizard?
No
Yes
Version 4, 16.09.2005
The remaining procedure for the IP wizard is
described on page 24.
127
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
Assigning send and receive
connections to internal
parties
If you have several connections configured
for your telephone system, you can do the
following for each internal party:
u Assign a send connection or allow the
internal party to select the line for each
external call (select line).
u Assign one or several receive connections. Only calls received via one of the
assigned connections are signalled on
the device.
Assigning a send connection
Prerequisite: Several phone numbers are
configured for your base.
v ¢ ÏSettings ¢ Telephony
¢ Send Connections
A list of the internal parties (base, handsets,
fax machine INT8 – where applicable) is displayed.
Select the internal parties that
should be assigned a new send
connection and press the display key §OK§.
Select Select at each call or an
connection as the send connection. All configured connections
are displayed with the names
you have set.
§Save§
Press the display key to save the
changes.
Select at each call is only offered if more
than one connection is configured on the
base.
Version 4, 16.09.2005
If you select Select at each call, the internal
party can select which MSN is used to establish a connection every time he makes a call.
128
The Gigaset.net connection is not included
in the selection for the send connections.
Gigaset.net numbers (suffix #9) are automatically dialled via Gigaset.net.
Please note
If the send connection for an internal
party is deleted or deactivated, then
depending on the connection, that party
is assigned either the fixed line connection or the first MSN in the configuration
as the send connection.
If the base is connected to the and no
MSN has been configured, the internal
party is assigned the main number for
the connection.
Making calls via Bluetooth GSM
connection
If you wish to make a call from the base via
the GSM connection of a mobile connected
to the phone via Bluetooth, you must select
either the GSM connection or Select at each
call as the send connection.
For the GSM connection, the name of the
mobile that is currently/was last connected
to the base is displayed in the list of known
devices. When selecting the send connection, the name of the currently connected
mobile is displayed.
The same applies if you wish to establish
GSM connections via a handset registered to
the base.
Assigning receive connections
Prerequisite: Several connections are configured for your base.
v ¢ ÏSettings ¢ Telephony
¢ Receive Connections
A list of the internal parties (base, handsets,
local answering machines, fax machine INT8
– where applicable) is displayed.
Select the internal parties that
should be assigned new receive
connections and press the display key §OK§.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
A list of all configured connections and the
Gigaset.net connection is opened. You can
select Yes or No for each connection.
Select Yes if you want the relevant connection to be the
receive connection for the internal party.Select No if it should
not be the receive connection.
Change to the next connection.
¤ Repeat these two steps for each connection.
¤ Press the display key §Save§ to save the
changes.
Further information on how to assign
receive connections to local answering
machines can be found on page 89.
Please note
u If a new connection is configured, it is
assigned as the receive connection to
all internal parties and answering
machine 1.
u If a connection is not assigned as the
receive connection to any internal
party, calls on this connection will not
be signalled.
Accepting calls to a Bluetooth GSM
connection
Version 4, 16.09.2005
If you wish to accept calls on the base that
are made to the GSM connection of a mobile
connected to that base via Bluetooth, then
you must select the GSM connection as the
receive connection. The name of the mobile
is displayed for the GSM connection in the
list of known devices.
The same applies if you wish to accept calls
via the GSM connection to a handset registered on the base.
Updating the phone
firmware
Prerequisite: The base is connected to the
Internet (i.e., connected to a router,
¢ page 16).
If necessary, you can update your base's
firmware.
The firmware update is downloaded directly
from the Internet by default. The relevant
Web page is preconfigured on your base.
Prerequisite:
The base is in idle status i.e.,
u No calls are being made.
u There is no internal connection to/
between the registered handsets.
u No handset has the base menu open.
Starting the firmware update
manually
v ¢ Ï Settings ¢ System
Update Firmware
Select and press §OK§.
Enter the system PIN and
press §OK§.
The base establishes a connection to the
Internet.
§Yes§
Press the display key to start the
firmware update.
Please note
u The firmware update can take up to
three minutes.
u When updating from the Internet,
checks are made to ensure that no
newer version of the firmware exists.
If this is not the case, the operation is
terminated and a message is issued to
that effect.
129
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
Updating firmware automatically
Your base will check daily whether a newer
firmware version is available from the Internet on the configuration server. If firmware
updates are available, the message New
firmware available. Update? is displayed in
the idle display of the base.
§Yes§
Press the display key to confirm
the prompt.
The firmware is loaded onto your base.
If you answer the prompt with §No§, the base
returns to idle status. Your base will no
longer remind you that firmware updates
are available. The message will only be
shown again if a newer version of the
firmware is available to download. You can
also carry out the firmware update manually
(¢ page 129).
Please note
If the base is not connected to the Internet at the time when the check for new
firmware is to be carried out (e.g.,
because the router is deactivated), the
check is carried out as soon as the base is
reconnected to the Internet.
You can deactivate the automatic version
check via the Web configurator.
Version 4, 16.09.2005
Activating/deactivating the
DECT interface
If you deactivate the DECT interface, the
radio connection between the base and the
registered handsets is terminated. Handsets
are "asynchronous" to the base. They cannot
establish a connection with the base and no
calls are signalled. Handsets do remain registered to the base and will synchronise with
the base as soon as you reactivate the DECT
interface.
v ¢ ÏSettings ¢ System
¢ DECT Interface
130
§Change§
Press the display key to activate/
deactivate the DECT interface
(³= activated).
If there are no handsets registered to the
base, the base's DECT interface is automatically deactivated.
If you switch the base to registration mode
(¢ page 104) to reregister handsets, the
DECT interface is automatically reactivated.
Activating/deactivating the
FAX port
Prerequisite: Your base is connected to the .
You can connect a fax machine to the FAX
port on the telephone. To register the fax
machine to the base, you must activate the
FAX port.
The FAX port is deactivated by default.
When you activate the FAX port, it is
regarded as registered. The internal number
8 is assigned to it/the connected fax
machine. INT 8 is displayed in the list of
internal parties (even if there is not a fax
machine connected).
v ¢ ÏSettings ¢ System ¢ FAX Port
§Change§
Press the display key to activate/
deactivate the FAX port
(³= on).
For instructions on connecting a fax
machine see page 114
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
Restoring the base to the
default settings
Checking the base's MAC
address
The individual settings are reset.
When the settings are restored:
u Handsets are still registered
u The system PIN is not reset.
Depending on your network configuration,
you may have to enter your base's MAC
address in your router's access control list,
for example. You can check the MAC address
on the base.
In idle status:
Open menu.
*#Q5# 2 Q
Press keys in sequence.
The MAC address is displayed.
§Back§
Return to idle status.
The following settings in particular are reset
to the default settings (you can make the
settings marked "*)" via the Web configurator):
u The entered MSNs and VoIP connections
(are deleted)
u The assignment of send and receive connections
u Settings for the ringer melodies and volume levels
u Settings for wake-up calls and appointments
u Audio settings for VoIP connections *)
u DTMF settings *)
u Own area code
u Settings for the local network
u The names of the handsets
u Eco mode is deactivated
u PABX connection settings
u Answering machine settings and personal announcements are deleted
u Function and display key assignments as
well as key
u Settings for network services: call divert,
call transfer (ECT)
The following lists are deleted:
u Call lists
u Answering machine lists
v ¢ Ï ¢ System ¢ Reset
Enter the system PIN and
press §OK§.
§Yes§
Press the display key.
Version 4, 16.09.2005
After resetting, the base is restarted.
The installation wizard is launched
(¢ page 18).
Changing the default
connection
You can connect your base to the Internet
(DSL connection) to make calls via VoIP and,
in addition, to a default telephone connection – the or analogue fixed line. Your telephone automatically detects the network to
which it is connected and changes its configuration accordingly.
Please note
Connect the phone to the telephone
connection first and only afterwards to
the power supply.
If you change the phone connection from to
the fixed line or vice versa, the following
message is displayed:
Network Detection
Ð
Your physical line
has been changed.
OK
¤ Press the display key §OK§ to start network
identification.
131
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / settings.fm / 24.05.11
Configuring the system settings
Once the network has been identified, the
following appears in the display:
Adapt system configuration to public
network?
Or:
Adapt system configuration to ISDN
network?
¤ If the network has been identified correctly, press the display key §Yes§.
If you wish to repeat the network identification procedure, press the display key §No§
instead.
Once you have confirmed the offered telephone connection with §Yes§, any system settings on the phone relating to the connection must be reset first so that the phone's
configuration can be adjusted to the
changed connection.
The following is displayed:
Network Detection
Ð
All system settings
will be reset
to defaults.
No
Yes
¤ Press the display key §Yes§ to start the
Version 4, 16.09.2005
reset.
All necessary system settings are reset.
IP and VoIP settings, for example, are
retained and the handsets are still registered.
If there were no VoIP connections configured on the base before the change of connection, after the reset the installation wizard is started for the current connection (see
the following table).
Connection
Wizards in the
following order
VoIP
IP wizard
Registration wizard
Connection wizard
132
Connection
Wizards in the
following order
Fixed line and
VoIP
IP wizard
Registration wizard
Connection wizard
For the connection wizard procedure see
page 20ff.
Please note
u If you press the display key §Back§ or
press briefly on the red end key T,
you will go back to the previous display.
u To cancel the entire procedure, press
and hold the red end key T.
None of the telephone settings will
then be changed in any way. You can
continue to use the telephone if you
reconnect it to the previous line type.
If, however, you still wish to operate
the telephone on the "new" line type,
you will need to reset it
(¢ page 131). After this the wizards
will be started for the new line type.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / PABX.fm / 24.05.11
Connecting the base to a PABX
Connecting the base to
a PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
Please note
There are several ways of assigning an
MSN to extension systems. For more
information on this topic, please refer to
the user guide belonging to your extension system.
Saving an access code
(outside line code)
Version 4, 16.09.2005
You can save two access codes: one for dialling via or fixed line and one for dialling via
VoIP.
Prerequisite: You must enter an access code
for external calls using your PABX, e.g., "0".
v ¢ Ï ¢ Telephony ¢ Access Code
¤ You can enter data in the following fields:
Access external line with:
For dialling via or the analogue fixed line:
enter or change the access code, max.
three digits.
For:
Specify when the access code should be
inserted for dialling via or the fixed line:
Call Lists
The access code is put in front of numbers
dialled on the base or a handset from one
of the following lists:
– The accepted calls list
– In the missed calls list
– An answering machine list
All Calls
The access code prefixes all numbers
dialled on the base or a handset.
Off
The access code for fixed line is deactivated. It does not prefix any phone
number.
Access external IP line with:
For dialling via VoIP connections: Enter or
change access code, max. 4 digits.
For:
Specify when the access code should also
be dialled when dialling via VoIP:
Call Lists
For dialling from the missed calls list,
accepted calls list or an answering
machine list.
All Calls
For all numbers dialled on the base or a
handset.
Off
No access code should be dialled first for
calls via a VoIP connection.
§Save§
Press the display key.
Please note
The access code never prefixes any emergency numbers.
133
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / PABX.fm / 24.05.11
Connecting the base to a PABX
Setting pauses (fixed line)
Changing the pause after line
seizure
You can change the length of the pause that
is inserted between picking up the receiver
c and sending the number.
Open the main menu.
*#Q5#
Press keys in sequence.
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs;
3 = 7 secs) and press §OK§.
Changing the pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
Open the main menu.
*#Q5#
Press keys in sequence.
Enter a digit for the length of the
pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press §OK§.
Changing a dialling pause (pause
after access code)
By default, your phone is set for operation on
the main connection (recall 250 ms). For
operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
v ¢ Ï ¢ Telephony ¢ Flash Duration
Select recall and press §Select§
(Ø = set value). Possibilities
include: 80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms, 400 ms,
600 ms, 800 ms.
Transferring a call –
ECT (Explicit Call Transfer)
With some PABX systems, your two parties
are not connected when you replace
the receiver during call transfer (page 63).
In this case you need to activate this function (page 60). To do this, please refer to the
operating instructions of your PABX.
Using Centrex
If your base is part of a Centrex system, you
can use the following features:
Open the main menu.
*#Q5#
Press keys in sequence.
Calling Name Identification (CNI)
Enter a digit for the length of
the pause (1 = 1 sec.; 2 = 2 sec.;
3 = 3 sec.; 4 = 6 sec.) and
press §OK§.
Inserting a dialling pause:
¤ Assign the function Insert P
(¢ page 116) to one of the programmable keys.
¤ When entering the phone number, at the
point at which a dialling pause is to be
inserted, press and hold this function key
until a P appears in the display (approx.
2 seconds).
Message Waiting Indication (MWI)
Version 4, 16.09.2005
Setting recall (fixed line)
134
When you receive incoming calls from other
Centrex subscribers, the caller's number and
name are shown on the display.
New calls in the call list are indicated using
icons (¢ page 68). The f message key
flashes.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / PABX.fm / 24.05.11
Connecting the base to a PABX
Selecting dialling mode/
options
The keypad function allows you to control
certain features by entering sequences of
characters and digits.
The keypad function must be activated
when you connect your base to an PABX or
exchange (e.g., Centrex) that is controlled
using keypad protocol. The digits/characters 0–9, * and # are sent as keypad information elements. Please ask your service provider about the information and codes you
can transmit.
Setting options
Activating/deactivating the
keypad during a call
In addition to the permanent settings
described above, you can also switch temporarily to Auto. Keypad.
The setting only applies to the current external call and is automatically deactivated
after the call is ended.
Depending on whether Auto. Keypad is activated, you may need to activate or deactivate Auto. Keypad during the call.
§Options§
Open menu.
Auto. Keypad
Select and press §Change§
(³ = on).
You can switch between the Auto. Tone Dial,
Auto. Keypad and Dial of * and # settings.
Auto. Tone Dial
Once normal dialling has been activated,
* and # are not transmitted during dialling and if * and # are entered it is not possible to switch to the keypad.
Auto. Keypad
Once * or # have been entered, this setting automatically switches signalling
during dialling to the keypad. This automatic switchover is needed for giving
commands to the exchange or PABX.
Dial of * and #
Once Dial of * and # has been activated,
the * and # characters are transmitted
during dialling as commands to the
exchange or PABX.
Version 4, 16.09.2005
Regardless of the setting options above,
after dialling or during a call the phone
switches automatically to tone dialling
(DTMF), e.g., for remote control of an
answering machine.
v ¢ Ï Settings ¢ Telephony
¢ Dialing Mode
Select setting and press §Select§
e.g., Auto. Tone Dial (Ø = on).
135
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Industry Canada Certification
Industry Canada Certification
Operation is subject to the following two conditions (1) this device may not cause interference,
and (2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
NOTICE: The Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications
network, protective, operational and safety
requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the
equipment will operate to the user’s satisfaction.
Before installing this equipment, users should
ensure that it is permissible to be connected to
the facilities of the local telecommunications
company. The equipment must also be installed
using an acceptable method of connection. The
customer should be aware that compliance with
the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user
to this equipment, or equipment malfunctions,
may give the telecommunications company cause
to request the user to disconnect the equipment.
Users should ensure for their own protection that
the electrical ground connections of the power
utility, telephone lines and internal metallic water
pipe system, if present, are connected together.
This precaution may be particularly important in
rural areas
NOTE: Users should not attempt to make such
connections themselves, but should contact the
appropriate electric inspection authority,
or electrician, as appropriate.
This product meets the applicable Industry
Canada technical specifications.
Version 4, 16.09.2005
The Ringer Equivalence Number is an indication of
the maximum number of devices allowed to be
connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement
that the sum of the RENs of all devices does not
exceed five.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
136
FCC / ACTA Information
Warning: Changes or modifications to this unit
not expressly approved by Gigaset Communications USA LLC could void the FCC authority to
operate the equipment. This includes the addition
of any external antenna device.
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA.
On the bottom of the base station is a label that
contains, among other information, a product
identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the
telephone company.
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided
with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of
devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result
in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To be certain of
the number of devices that may be connected to
a line, as determined by the total RENs, contact
the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
A copy of the supplier's Declaration of Conformity
(SDoC) is available at this Internet address:
www.gigaset.com/docs.
If this equipment causes harm to the telephone
network, the telephone company will notify you in
advance, that temporary discontinuance of service may be required. But if advance notice isn’t
practical, the telephone company will notify the
customer as soon as possible. Also, you will be
advised of your right to file a complaint with the
FCC if you believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures
that could affect the operation of the equipment.
If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Version 4, 16.09.2005
FCC / ACTA Information
service. If you experience trouble with this telephone system, disconnect it from the network
until the problem has been corrected or until you
are sure that the equipment is not malfunctioning.
If trouble is experienced with this equipment, for
repair or warranty information, please contact
Support at 1-866 247-8758. If the equipment is
causing harm to the telephone network, the telephone company may request that you disconnect
the equipment until the problem is resolved. This
equipment is of a type that is not intended to be
repaired by the Customer (user).
This telephone system may not be used on coin
service provided by the telephone company. Connection to party line service is subject to state tariffs. Contact the state public utility commission,
public service commission or corporation commission for information. Privacy of communications may not be ensured when using this phone.
If your home has specially wired alarm equipment
connected to the telephone line, ensure the
installation of this equipment does not disable
your alarm equipment. If you have questions
about what will disable alarm equipment, consult
your telephone company or a qualified installer.
This telephone system equipment has been
tested and found to comply with the limits for
Class B digital device, pursuant to Part 15 of the
FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation. Some cordless telephones
operate at frequencies that may cause interference to nearby TV’s and VCR’s; to minimize or prevent such interference, the system base should
not be placed near or on top of a TV or VCR; and, if
interference is experienced, moving the base farther away from the TV or VCR will often reduce or
eliminate the interference.
However, there is no guarantee that interference
will not occur in a particular installation. If this telephone system does cause harmful interference
to radio or television reception, which can be
determined by turning the system off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the base station and receiver.
3. Connect the base station into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio TV
technician for help.
Notice for Direct Inward Dialing
("DID")
ALLOWING THIS EQUIPMENT TO BE OPERATED IN
SUCH A MANNER AS TO NOT PROVIDE FOR
PROPER ANSWER SUPERVISION IS A VIOLATION
OF PART 68 OF THE FCC‘S RULES.
Notice to Hearing Aid Wearers:
This phone system is compatible with inductively
coupled hearing aids.
Power Outage:
In the event of a power outage, your cordless
telephone will not operate. The cordless telephone requires electricity for operation. You
should have a telephone that does not require
electricity available for use during power outages.
Notice:
The installation of the base unit should allow
at least 8 inches between the base and persons to
be in compliance with FCC RF exposure guidelines.
For body worn operation, the portable part (handset) has been tested and meets FCC RF exposure
guidelines. Use with an accessory that contains
metal parts may not ensure compliance with FCC
RF exposure guidelines.
Notice to telephone company service:
If you need service from your telephone company,
please provide them with the information
– Facility interface Code (FIC)
– Service Order Code (SOC)
– Universal Service Order Code (USOC)
as indicated on the label on the bottom side of the
base station.
Safety precautions
Before using your telephone equipment, basic
safety instructions should always be followed to
reduce the risk of fire, electric shock and injury to
persons.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the product.
3. Unplug this product from the wall telephone
jack and power outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use damp
cloth for cleaning.
137
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Version 4, 16.09.2005
FCC / ACTA Information
4. Do not use this product near water, for example,
near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swimming
pool.
5. Place this product securely on a stable surface.
Serious damage and/or injury may result if the
unit falls.
6. Slots or openings in the cabinet and the back
and bottom are provided for ventilation, to protect it from overheating. These openings must not
be blocked or covered. This product should never
be placed near or over a radiator or heat register,
or in a place where proper ventilation is not provided.
7. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of AC line
power to your home, consult your dealer or local
power company.
8. Do not place objects on the power cord. Install
the unit where no one can step or trip on the cord.
9. Do not overload wall outlets and extension
cords as this can result in the risk of fire or electric
shock.
10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could
result in the risk of fire or electric shock. Never spill
liquid of any kind on this product.
11. To reduce the risk of electric shock or burns, do
not disassemble this product. Take it to a qualified
service center when service is required. Opening
or removing covers may expose you to dangerous
voltages, dangerous electrical current or other
risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
Disconnect TNV circuit connector before removing cover.
12. Unplug the product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a.) When the power cord is damaged or frayed.
b.) If liquid has been spilled into the product.
c.) If the product has been exposed to rain or
water.
d.) If the product does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating
instructions because improper adjustment of
other controls may result in damage and may
require extensive work by a qualified technician to
restore the product to normal operation.
e.) If the product has been dropped or physically
has been damaged.
f.) If the product exhibits a distinct change in performance.
138
13. Avoid using a telephone (other than a cordless
type) during a thunderstorm. There may be a
remote risk of electrical shock from lightning.
Therefore we suggest a surge arrestor.
14. Do not use the telephone to report a gas leak
in the vicinity of the leak.
15. Emergency/911 numbers may not be dialed if
the keypad is locked.
16. Minimum No. 26 AWG telecommunication line
cord must be used with this phone.
BATTERY SAFETY PRECAUTIONS
To reduce the risk of fire, injury or electric shock,
and to properly dispose of batteries, please read
and understand the following instructions.
CONTAINS NICKEL METAL HYDRIDE BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT DISPOSE OF IN MUNICIPAL WASTE.
1. Only use the batteries specified for use with this
product.
2. DO NOT USE NICKEL CADMIUM OR LITHIUM
BATTERIES, or mix batteries of different sizes or
from different manufacturers in this product. DO
NOT USE NONRECHARGEABLE BATTERIES.
3. Do not dispose of the batteries in a fire; the cells
may explode. Do not expose batteries to water.
Check with local codes for special disposal instructions.
4. Do not open or mutilate the batteries. Released
electrolyte is corrosive and may cause damage to
the eyes or skin. The electrolyte may be toxic if
swallowed.
5. Exercise care in handling the batteries in order
not to short the batteries with conducting materials such as rings, bracelets, and keys. The batteries
or conducting material may overheat and cause
burns or fire.
6. Charge the batteries provided with, or identified for use with, this product only in accordance
with the instructions and limitations specified in
the user’s manual. Do not attempt to charge the
batteries with any means other than that specified
in the users manual.
7. Periodically clean the charge contacts on both
the charger and handset.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Service (Customer Care)
Service (Customer Care)
Customer Care Warranty for Cordless Products
To obtain Customer Care Warranty service,
product operation information, or for problem resolution, call:
Toll Free: 1-866 247-8758
End-user limited warranty
This product is covered by a one year limited warranty. Any repair replacement or warranty service,
and all questions about this product should be
directed to: 1-866 247-8758.
This limited, non-transferable warranty is provided to the original buyer/end-consumer ("you")
for systems, handsets and accessories (collectively, "Product") provided by Gigaset Communications USA LLC or Gigaset Communications Canada Inc. (collectively "Gigaset NAM"). Gigaset NAM
warrants to you that at the date of purchase, the
Product is free of defects in workmanship and
materials and the software included in the Product will perform in substantial compliance to its
program specifications.
1. WARRANTY PERIOD
The Product warranty period is one (1) year from
the original date of purchase by you. Proof of purchase (e.g., sales slip or invoice) must be provided
with any Product returned during the warranty
period. Batteries supplied with the Products are
warranted to be free from defects at the time of
purchase only.
2. EXCLUSIVE REMEDY
Gigaset NAM's entire liability and your exclusive
remedy if the Product is defective in materials or
workmanship during the warranty period and is
returned shall be that the Product will be repaired
or replaced as set forth in Section 4 below. Reconditioned replacement components, parts or materials may be used in the replacement or repair.
Data in the memory of the Product may be lost
during repair.
Version 4, 16.09.2005
3. THIS LIMITED WARRANTY DOES NOT
COVER AND IS VOID WITH RESPECT
TO THE FOLLOWING:
– Cosmetic damage, physical damage to the surface of the Product, including, without limitation, breakage, cracks, dents, scratches or
adhesive marks on the LCD screen or outside
casing of the Product.
– Products which have been repaired, maintained or modified (including the antenna) by
anyone other than Gigaset NAM or a Gigaset
NAM-approved repair facility, or that have
been improperly installed.
– Cost of installation, removal or reinstallation.
– Damage due to any telephone, electronic,
hardware or software program, network, Internet or computer malfunctions, failures, or difficulties of any kind, including without limitation, server failure or incomplete, incorrect,
garbled or delayed computer transmissions.
– Equipment and components not manufactured, supplied or authorized by Gigaset NAM.
– Modification of the Product's components, or
operation of the Product in an unsuitable environment or in a manner for which it is not
intended, including but not limited to failures
or defects caused by misuse, abuse, accidents,
physical damage, abnormal operation,
improper handling or storage, neglect, alterations, unauthorized installation, removal or
repairs, failure to follow instructions, problems
caused by the carrier's network coverage,
exposure to fire, water or excessive moisture or
dampness, floods, or extreme changes in climate or temperature, acts of God, riots, acts of
terrorism, spills of food or liquids, viruses or
other software flaws introduced into the Product or other acts which are not the fault of
Gigaset NAM and which the Product is not
specified to tolerate, including damage caused
by mishandling or blown fuses.
– Products which have had warranty stickers,
electronic serial number and/or serial number
label removed, altered, rendered illegible or
fraudulently applied to other equipment.
– Signal reception problems (unless caused by
defect in material or workmanship in the Product).
– Products operated outside published maximum ratings.
– Performance of the Products when used in
combination with other products or equipment not manufactured, supplied or authorized by Gigaset NAM.
– Consumables (such as batteries and fuses).
139
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Service (Customer Care)
– Payments for labor or service to representatives or service centers not authorized to perform product maintenance by Gigaset NAM.
– Loss of data.
– Testing and examination discloses that the
alleged defect or malfunction in the Product
does not exist.
This warranty does not cover customer education,
instruction, installation or removal, set up adjustments, problems related to service(s) provided by
a carrier or other service provider, and/or signal
reception problems. Gigaset NAM shall not be
responsible for software, firmware, information, or
memory data contained in, stored on, or integrated with any Products returned for repair,
whether under warranty or not. This warranty is
valid only in the country in which it is purchased
(i.e., the United States of America or Canada
respectively, but not both).
USE WITH ACCESSORIES NOT SUPPLIED BY
GIGASET NAM OR NOT OTHERWISE EXPRESSLY
AUTHORIZED BY GIGASET NAM MAY VOID
WARRANTY.
4. WARRANTY CLAIM PROCEDURE
All warranty claims must be made by notifying
Gigaset NAM prior to the expiration of the warranty period. Gigaset NAM's obligation to provide
warranty support shall not extend past the end of
the warranty period, except that any product
repaired or replaced during the warranty period
shall continue to be warranted for the balance of
such warranty period or thirty (30) days, whichever is greater.
Support service will be provided for you by
accessing the toll free customer service number:
1-866 247-8758
5. LIMITATION OF WARRANTY
Gigaset NAM makes no warranty or representation that the software in the Products will meet
your requirements or will work in combination
with any hardware or applications software products provided by third parties, that the operation
of the software will be uninterrupted or error free,
or that all defects in the software products will be
corrected.
Version 4, 16.09.2005
6. LIMITATION ON REMEDIES; NO
CONSEQUENTIAL OR OTHER
DAMAGES
Your exclusive remedy for any breach of this limited warranty is as set forth above. Except for any
refund elected by Gigaset NAM, YOU ARE NOT
140
ENTITLED TO ANY DAMAGES, INCLUDING BUT
NOT LIMITED TO CONSEQUENTIAL DAMAGES,
if the Product does not meet the limited warranty
, and, to the maximum extent allowed by applicable law, even if any remedy fails of its essential
purpose. The terms below ("Exclusion of Incidental, Consequential and Certain Other Damages")
are also incorporated into this limited warranty .
Some states/jurisdictions/provinces do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This limited warranty gives you specific legal rights. You may have
others which vary from state/jurisdiction/province to state/jurisdiction/province.
7. DISCLAIMER OF WARRANTIES
GIGASET NAM AND ITS SUPPLIERS PROVIDE THE
PRODUCT AND SUPPORT SERVICES (IF ANY) AS IS
AND WITH ALL FAULTS. THE LIMITED WARRANTY
IS IN LIEU OF ANY OTHER EXPRESS WARRANTIES
(IF ANY) CREATED BY ANY DOCUMENTATION OR
PACKAGING EXCEPT FOR THE LIMITED WARRANTY, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IS IN LIEU OF ANY
IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, OF ACCURACY OR COMPLETENESS OR RESPONSES, OF RESULTS, OF
WORKMANLIKE EFFORT, OF LACK OF VIRUSES
AND OF LACK OF NEGLIGENCE, ALL WITH REGARD
TO THE PRODUCT, AND THE PROVISION OF OR
FAILURE TO PROVIDE SUPPORT SERVICES. ALSO,
THERE IS NO WARRANTY OR CONDITION OF TITLE,
QUIET ENJOYMENT, QUIET POSSESSION, OR CORRESPONDENCE TO DESCRIPTION OR NONINFRINGEMENT WITH REGARD TO THE PRODUCT.
Some states/jurisdictions/provinces do not allow
limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential damages, so the above exclusions or
limitations may not apply to you. If an implied
warranty or condition is created by your state/
province and federal or state/provincial law prohibits disclaimer of it, you also have an implied
warranty or condition, BUT ONLY AS TO DEFECTS
DISCOVERED DURING THE PERIOD OF THIS LIMITED WARRANTY (ONE YEAR). AS TO ANY DEFECTS
DISCOVERED AFTER THE ONE YEAR PERIOD,
THERE IS NO WARRANTY OR CONDITION OF ANY
KIND. This limited warranty gives you specific legal
rights, and you may also have other rights which
vary from state to state/province to province. In
no event shall Gigaset NAM's liability exceed the
cost of repairing or replacing defective Products
as provided herein, and any such liabilities will terminate upon expiration of the warranty period.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Service (Customer Care)
Any supplements or updates to the Product or the
software in the Product, including without limitation, any (if any) software fixes or upgrades or bug
fixes provided to you after the expiration of the
one year limited warranty period are not covered
by any warranty or condition, express, implied or
statutory.
8. EXCLUSION OF INCIDENTAL,
CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL GIGASET NAM,
SELLER OR THEIR SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT
NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS
OR CONFIDENTIAL OR OTHER INFORMATION, FOR
BUSINESS INTERRUPTION, FOR PERSONAL INJURY,
FOR LOSS OF PRIVACY, FOR FAILURE TO MEET ANY
DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY
OTHER PECUNIARY OR OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED
TO THE USE OF OR INABILITY TO USE THE PRODUCT, THE PROVISION OF OR FAILURE TO PROVIDE
SUPPORT SERVICES, OR OTHERWISE UNDER OR IN
CONNECTION WITH ANY PROVISION OF THIS LIMITED WARRANTY, EVEN IN THE EVENT OF THE
FAULT, TORT (INCLUDING NEGLIGENCE), STRICT
LIABILITY, BREACH OF CONTRACT OR BREACH OF
WARRANTY OF GIGASET NAM OR SELLER OR ANY
SUPPLIER, AND EVEN IF GIGASET NAM OR SELLER
OR ANY SUPPLIER HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. REPAIR OR
REPLACEMENT, AS PROVIDED UNDER THE WARRANTY, IS YOUR SOLE AND EXCLUSIVE REMEDY
FOR BREACH OF THE LIMITED WARRANTY.
THE FOREGOING LIMITATIONS, EXCLUSIONS AND
DISCLAIMERS SHALL APPLY TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF
ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.
10. GOVERNING LAW
If this Product was purchased in the United States
of America this limited warranty will be governed
by the laws of Texas, and exclude the United
Nations Convention on Contracts for the International Sale of Goods. If this Product was purchased
in Canada this limited warranty will be governed
by the laws of the Province of Ontario and the federal laws of Canada applicable therein, and
exclude the United Nations Convention on Contracts for the International Sale of Goods.
If you want to learn more about Gigaset Service or
for Support on your Gigaset phone, visit our web
site at http://www.gigaset.com or please call
1-866 247-8758.
Issued by
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
© Gigaset Communications GmbH 2011
All rights reserved.
Subject to availability. Rights of modifications
reserved.
Product attributes subject to change.
We reserve the right, to make changes without
notice in equipment design and/or components.
Part Number: A31008-XXXXX-XXXX-X-XXXX
© Copyright 2011.
Version 4, 16.09.2005
9. LIMITATION OF LIABILITY AND
REMEDIES
NOTWITHSTANDING ANY DAMAGES THAT YOU
MIGHT INCUR FOR ANY REASON WHATSOEVER
(INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL DIRECT OR
GENERAL DAMAGES), THE ENTIRE LIABILITY OF
GIGASET NAM, SELLER AND ANY OF THEIR SUPPLIERS UNDER ANY PROVISION OF THIS LIMITED
WARRANTY AND YOUR EXCLUSIVE REMEDY FOR
ALL OF THE FOREGOING (EXCEPT FOR ANY REMEDY OF REPAIR OR REPLACEMENT ELECTED BY
GIGASET NAM OR SELLER OR SUPPLIER WITH
RESPECT TO ANY BREACH OF THE LIMITED WARRANTY) SHALL BE LIMITED TO THE GREATER OF
THE AMOUNT ACTUALLY PAID BY YOU FOR THE
PRODUCT OR FIVE DOLLARS ($5.00 USD/CAN).
141
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Service (Customer Care)
Questions and answers
If you have any questions about the use of
your base, visit our website at
www.gigaset.com/service
for assistance 24/7. The table below contains
a list of common problems and possible
solutions.
Registration or connection problems with a
Bluetooth headset.
¥
¥
¥
Reset the Bluetooth headset (see the user
guide for your headset).
Delete registration data from the base by
deregistering the device (
page 110).
Repeat the registration process
page 109).
¢
¢
1. The base is not connected to the mains power
supply.
Check the mains connection
page 15).
¢
¢
2. The backlight is deactivated because a time
page 119).
control was activated (
Press any key on the base to temporarily
activate the display backlight.
Or:
Deactivate the time control
page 119).
¥
¥
¢
No connection between the base and handset.
¥
1. Handset is out of the range of the base.
Move the handset closer to the base.
2. Range of the base has been reduced as
Eco mode is active.
Deactivate Eco Mode (
page 100) or
reduce the distance between the handset
and the base.
¥
¢
3. The handset has not been registered to the
base or was deregistered due to the registration of an additional handset (more than
six DECT registrations).
Register the handset with the base
page 104).
¥
¢
¥
Version 4, 16.09.2005
4. The firmware is currently being updated.
Please wait until the update is complete.
¥
5. Base is not switched on.
Check the power adapter for the base
page 14).
142
¢
¥
¢
1. The ringer is switched off.
Activate the ringer (
page 121).
¥
¢ page 58).
2. Call divert set for "All Calls".
Deactivate call divert (
3. The connection on which the call is received is
not assigned to the base as a receive connection.
Change the assignment of receive connections (
page 104).
¥
¢
The display shows "Please check phone connection".
Connector to the telephone network may not be
plugged in.
Check the telephone connection
page 14).
¥
¢
You cannot hear a ringer/dialling tone from the
fixed line.
The display is blank.
¥
The base does not ring.
The supplied phone cable is not being used or
the phone cable may be faulty.
Replace the phone cable. When purchasing
from a phone retailer, ensure the cable has
the correct jack pin connections
page 149).
¥
¢
Phone does not ring after setting up the phone
number (MSN).
£
The area code has been stored with the MSN.
Save MSN without area code.
Some of the network services do not work as
specified.
£
Features are not activated.
Query with the network provider.
Error tone sounds after system PIN prompt.
¥
You have entered the wrong system PIN.
Repeat input of system PIN.
The other party cannot hear you.
You have pressed the mute button P.
The base is "muted".
Unmute the microphone (
page 57).
¥
¢
The number of the caller is not displayed
despite CLIP/CLI being activated.
¥
Calling Line Identification is not enabled.
The caller should ask the network provider to
enable Calling Line Identification.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Service (Customer Care)
You hear an error tone when keying in information (a descending tone sequence).
Firmware update or VoIP profile download is
not carried out.
Action has failed/invalid input.
Repeat the process.
Watch the display and refer to the user guide
if necessary.
¥
1. If Currently not possible is displayed, the VoIP
connections may be busy or a download/
update is already being carried out.
Repeat the process at a later date.
No time is specified for a message in the call list.
2. If File unreadable is displayed, the firmware
file may be invalid.
Use only the firmware available on the
preconfigured Gigaset configuration
server.
¥
¥
Date and time have not been set.
Set date/time or
Activate synchronisation with a time server
on the Internet via the Web configurator.
An answering machine announces "PIN is incorrect" during remote operation.
¥
You have entered the wrong system PIN.
Repeat input of system PIN.
An answering machine is not recording any
messages/has switched over to announce only.
¥
¥
Its memory is full.
Delete old messages.
Play back new messages and delete.
An answering machine will not record a call or
ends the recording.
1. An error tone sounds and the display shows
Not possible.
¥
You are making the call via a broadband
connection. A recording is not possible in
this case. The attempt by the base to
establish a non-broadband connection
instead has failed.
2. The display shows AM memory full - Delete
messages.
The answering machine's memory is full.
Delete messages and then start recording
again.
Or:
End the call, delete old messages on the
answering machine and then re-establish
the connection.
¥
¥
3. If Server not accessible is displayed, the
download server may not be accessible.
The server is currently not accessible.
Repeat the process at a later date.
You have changed the preconfigured
server address. Correct the address. Reset
the base, if necessary.
¥
¥
4. If Transmission error XXX is displayed, an
error has occurred during the transmission of
the file. An HTTP error code is displayed for
XXX.
Repeat the process. If the error occurs
again, consult the Service department.
¥
5. If Check IP settings. is displayed, your base
may not be connected to the Internet.
Check the cable connections between the
base and router and between the router
and the Internet.
Check whether the base is connected to
the LAN i.e., it can be reached at its IP
address.
¥
¥
You cannot establish a connection to the base
with your PC's Web browser.
¥
¥
¥
¥
Version 4, 16.09.2005
¥
When establishing a connection, check the
base's local IP address that has been entered.
You can check the IP address on your base
(page 125).
Check the connections between the PC and
the base. Transmit a ping command to your
base e.g., from your PC (ping ).
You have tried to reach the base via a secure
http (https://...). Try again with http://....
143
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Service (Customer Care)
Exclusion of liability
Some displays may contain pixels (picture elements), which remain activated
or deactivated. As a pixel is made up of
three sub-pixels (red, green, blue), it is
possible that pixel colours may vary.
This is completely normal and does not
indicate a fault.
VoIP status codes
In the following tables you will find the
meaning of the most important VoIP status
codes and messages.
Status Meaning
code
0x31
IP configuration error
IP domain not entered.
0x33
IP configuration error:
SIP user name ( Authentication Name)
not entered.
This is shown, for example, when dialling
with a line suffix, if no connection is configured for the suffix on the base.
0x34
IP configuration error:
SIP password (Authentication Password) not entered.
0x300 The called party can be reached under
multiple phone numbers. If the VoIP provider supports this, a list of the phone
numbers is transmitted as well as the
status code. The caller can select the
number to which he wants to make the
connection.
0x301 Permanently diverted.
The called party can no longer be
reached under this number. The new
number is transferred to the phone
together with the status code, and the
phone then no longer accesses the old
number but dials the new address
immediately.
0x302 Temporarily diverted.
The phone is informed that the called
party cannot be reached under the
dialled number. The call is diverted for a
limited period. The phone is also notified of the length of the diversion.
Version 4, 16.09.2005
0x305 The query is sent to a different "proxy
server", e.g., to balance incoming queries. The phone will make the same
query once again to another proxy
server. This is not a redirection of the
address per se.
0x380 Other service:
The query or call could not be transferred. However, the phone is notified
of other options available to connect
the call.
144
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Service (Customer Care)
Status Meaning
code
Status Meaning
code
0x400 Wrong call
0x485 The URI dialled is not unique and cannot
be processed by the VoIP provider.
0x401 Not authorised
0x403 The requested service is not supported
by the VoIP provider.
0x404 Wrong phone number.
No connection on this number.
Example: While making a local call you
have not dialled the area code although
your VoIP provider does not support
local calls.
0x405 Method not permitted.
0x406 Not acceptable.
The requested service cannot be provided.
0x407 Proxy authentication required.
0x408 The party cannot be reached
(e.g., account has been deleted).
0x410 The requested service is not available
from the VoIP provider.
0x413 Message is too long.
0x414 URI is too long.
0x415 Query format is not supported.
0x416 URI is faulty.
0x420 Incorrect ending
0x421 Incorrect ending
0x423 The requested service is not supported
by the VoIP provider.
0x480 The dialled number is temporarily unavailable.
0x481 The recipient is not available.
0x482 Double service query
Version 4, 16.09.2005
0x483 Too many "jumps":
The query was rejected because the
service server (proxy) has decided that
this query has already passed through
too many service servers. The maximum
number is defined beforehand by the
original sender of the query.
0x484 Wrong number:
In most cases this response means that
you have simply omitted one or more
digits in the phone number.
0x486 The called party is busy.
0x487 General faults:
The call was cancelled before a call was
established. The status code confirms
receipt of the interruption signal.
0x488 The server cannot process the query
because the data entered in the media
description is not compatible.
0x491 The server notifies that the query will be
processed as soon as a previous query
has been completed.
0x493 The server rejects the query because the
phone cannot decrypt the message.
The sender has used an encryption
method that either the server or the
receiver phone cannot decrypt.
0x500 The proxy or the receiving device has
discovered a fault while executing the
query. It is therefore impossible to execute the query. If this occurs, the caller or
the phone displays the fault and repeats
the query after a few seconds.
The number of seconds after which
the query can be repeated may be
transmitted to the caller or phone by the
receiving device.
0x501 The query cannot be processed by the
recipient because the recipient does not
have the functionality that the caller
requires. If the recipient understands the
query but does not process it because
the sender does not have the necessary
rights or the query is not permitted in
the current context, status code 405 is
transmitted instead of 501.
0x502 In this case, the receiving device that
transmits this error code is a proxy or a
gateway and has received an invalid
response from its gateway via which this
query is to be processed.
0x503 The query cannot be processed by the
receiving device or the proxy at present
because the server is either overloaded
or is being serviced. If it is possible for
the query to be repeated in the
foreseeable future, the server informs
the caller or the phone of this.
145
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Service (Customer Care)
Status Meaning
code
0x504 Time limit exceeded at the gateway.
0x505 The server rejects the query because the
indicated version number of the SIP protocol does not concur with at least the
version that is used by the server or SIP
device involved in this query.
0x515 The server rejects the query because the
message exceeds the maximum permitted size.
Checking service information
If you contact Customer Services, you may
need the base's service information.
Prerequisite:
u The send connection is fixed line:
You must pick up the receiver when in
idle mode or be conducting an external
call.
u The send connection is VoIP:
You are conducting an external call.
0x600 The called party is busy.
0x603 The called party has rejected the call.
Please note
0x604 The called URI does not exist.
You may need to wait a few seconds before
§Options§ appears on the display
0x606 The communication settings are not
acceptable.
§Options§
0x704 Connection interrupted because of a
SIP error.
Confirm selection with §OK§.
You can select the following information/
functions with q:
1:
Base serial number (RFPI)
2:
Not in use: - - -
0x705 Wrong dialling tone
3:
0x701 The called party has hung up.
0x703 Connection cancelled because of timeout.
0x706 No connection established
0x751 Busy tone:
No codec match between the calling
and called party.
0x810 General socket layer error: User is not
authorised.
0x811 General socket layer error:
Wrong socket number
4:
5:
0x812 General socket layer error: Socket is not
connected.
0x813 General socket layer error:
Memory error
0x814 General socket layer error: Socket not
available – check IP settings/connection
problem/VoIP setting incorrect.
0x815 General socket layer error:
Illegal application on the socket interface.
Version 4, 16.09.2005
¢ Service Info
146
6:
Informs the service employees
of the base settings (in hex diagram format) e.g., the number
of registered handsets. The last
three digits indicate the line
types available on the base.
Variant (digits 1 to 4),
Telephone firmware version
(digits 5 to 6).
Gigaset.net number of your
phone. A service employee can
use this number to call you over
the Internet without you needing to be registered with a VoIP
provider. This means that the
employee can test online connections and VoIP telephony
regardless of the VoIP provider.
Device number of the base. This
contains additional information
for the service employee.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Environment
Unlock System
(only if the device has been locked by the provider)
Confirm selection with §OK§.
If necessary you can unlock a
provider-specific device lock
with a corresponding code.
Update Profile
Confirm selection with §OK§.
Your current VoIP provider profiles (general provider data for
all configured VoIP connections) are automatically loaded
onto your phone. The general
settings for all VoIP connections
for which profiles are available
on the Internet are updated.
Send configuration
Select this option only if you are
requested to do so by the Service employee.
Environment
Our environmental mission
statement
We, Gigaset Communications GmbH, bear
social responsibility and are actively committed to a better world. Our ideas, technologies and actions serve people, society and
the environment. The aim of our global
activity is to secure sustainable life resources
for humanity. We are committed to a responsibility for our products that comprises their
entire life cycle. The environmental impact
of products, including their manufacture,
procurement, distribution, utilisation, service and disposal, are already evaluated during product and process design.
Further information on environmentally
friendly products and processes is available
on the Internet at www.gigaset.com.
Environmental management
system
Version 4, 16.09.2005
Gigaset Communications
GmbH is certified pursuant
to the international standards EN 14001 and
ISO 9001.
ISO 14001 (Environment): Certified since
September 2007 by TüV SÜD Management
Service GmbH.
ISO 9001 (Quality): Certified since 17/02/
1994 by TüV Süd Management Service
GmbH.
147
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
Ecological energy consumption
The use of ECO DECT (¢ page 100) saves
energy and makes an active contribution
towards protecting the environment.
Disposal
All electrical and electronic products should
be disposed of separately from the municipal waste stream via designated collection
facilities appointed by the government or
the local authorities.
This crossed-out wheeled
bin symbol on the product
means the product is
covered by the European
Directive 2002/96/EC.
The correct disposal and
separate collection of your old appliance will
help prevent potential negative consequences for the environment and human
health. It is a precondition for reuse and
recycling of used electrical and electronic
equipment.
For more detailed information about disposal of your old appliance, please contact
your local council refuse centre or the original supplier of the product.
Appendix
Caring for your telephone
Wipe the base station, charging cradle and
handset with a damp cloth (do not use solvent) or an antistatic cloth.
Never use a dry cloth. This can cause static.
Contact with liquid
If the handset has come into contact with
liquid:
1. Switch off the handset and remove the
battery pack immediately.
2. Allow the liquid to drain from the handset.
3. Pat all parts dry, then place the handset
with the battery compartment open and
the keypad facing down in a dry, warm
place for at least 72 hours (not in a microwave, oven etc.).
4. Do not switch on the handset again until it is completely dry.
When it has fully dried out, you will normally
be able to use it again.
Insert strips
Blank insert strips for the function keys can
be found on the enclosed CD.
Specifications
Version 4, 16.09.2005
Power consumption of the base
148
In idle status
Approx. 3.6 W
During a call
Approx. 4.3 W
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
Writing and editing text
General specifications
Interfaces
analogue fixed line, Ethernet, Bluetooth
DECT standard
Supported
GAP standard
Supported
No. of channels
30 duplex channels
Radio frequency
range
1920–1930 MHz
Duplex method
Time multiplex,
10 ms frame length
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission power 5 mW, average power per
channel
Range (handsets)
up to 984 feet outdoors,
up to 165 feet indoors
Power supply
120 V ~/60 Hz
Environmental con- +41°F to +113°F, 20% to
ditions for operation 75% relative humidity
Setting upper/lower case or digits
Dialling mode
DTMF (tone dialling)
Codec
G.711, G.726, G.729AB with
VAD/CNG, G.722
Repeatedly press the hash key # to
change the text input mode.
Quality of Service
TOS, DiffServ
123 Writing digits
Protocols
DECT, GAP, SIP, RTP, DHCP,
NAT Traversal (STUN), HTTP
Abc Upper case (first letter in capitals,
all others in lower case)
Pin connections on the fixed line
telephone jack
Version 4, 16.09.2005
The following rules apply when writing text:
u Each key between Q and O is
assigned several letters and characters.
u Control the cursor with u v t s.
Press and hold u or v to move the cursor word by word.
u Characters are inserted to the left of the
cursor.
u Press the star key * to display the table
of special characters. Select the required
character and press the display key §Insert§
to insert the character at the cursor position.
u Press and hold Q to O to enter digits.
u Press display key Ñ to delete the character to the left of the cursor. Press and
hold to delete the word to the left of the
cursor.
u The first letter of the name of directory
entries is automatically capitalised, followed by lower case letters.
abc Lower case
The active mode is indicated at the bottom
right of the screen.
unused
unused
unused
unused
unused
unused
149
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
Writing names
Press the relevant key several times to enter
letters/characters.
¤ Enter the individual letters/characters by
pressing the corresponding key.
The characters assigned to the key are
shown in a selection line at the bottom left
of the screen. The selected character is highlighted.
¤ Briefly press the key several times in succession to select the required letter/character.
If you press and hold the key, the corresponding digit is inserted.
Using Gigaset QuickSync –
additional functions via the
PC interface
You can connect your base to your computer
via Bluetooth (page 108) or via the Ethernet
cable supplied. To use the Bluetooth connection, your PC must be equipped with a
suitable dongle and Bluetooth must be activated on the base.
Please note
It is not possible to have two parallel connections active between the PC and base
via Bluetooth and LAN.
Standard characters
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x
a b c 2 ä á à â ã ç
d e f 3 ë é è ê
g h i 4 ï
í
ì
î
j k l 5
m n o 6 ö ñ ó ò ô õ
p q r s 7 ß
t u v 8 ü ú ù û
w x y z 9 ÿ ý æ ø å
2)
1)
, ? !
Version 4, 16.09.2005
1) Space
2) Line break
150
You can access base functions and data from
your PC via AT commands.
The "Gigaset QuickSync" program (found
on the enclosed CD) provides you with a
convenient interface for communicating
with the base.
¤ Install this program on your PC.
Here are some of the functions that will then
be available to you:
u Reading service information, e.g.,
firmware version, serial number, manufacturer, MAC address of the base.
u Synchronising the directory on your base
with your PC's Outlook contacts.
u Transferring images as screensavers/
caller pictures from the PC to the resource
directory on the base.
u Downloading sounds (ringer melodies)
from the PC to the base.
You can also use AT commands to:
u Make outgoing calls and accept incoming calls. The display on the base behaves
as if the call was being handled directly
on it.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
Data transfer
Version 4, 16.09.2005
During the transfer of data between the
base and PC, the message Data transfer in
progress is shown on the display.
Any incoming calls are ignored during this
time. You can use the red end key T to
cancel the data transfer. You cannot enter
anything else via the keypad while data
transfer is in progress.
The corresponding source code can be
requested from Gigaset Communications
GmbH, but this will incur a EUR 10 processing charge for the provision. This request can
be made within three years from the date of
purchase. Please enclose a receipt with the
date of purchase, the ID number (MAC ID) for
the product and the version number for the
device firmware installed and send to the
following address:
Using Open Source software
contained in the product
Small Parts Dispatch Com Bocholt
The firmware for your Gigaset phone
includes integrated Open Source licensed
software from third-party providers. These
integrated Open Source software files are
protected by copyright. Rights of use for this
Open Source software that extend beyond
the pure scope of the program execution
intended by Gigaset Communications
GmbH are stipulated in the license conditions for the Open Source software.
If these rights of use are observed, then the
Open Source software can be used as the
license intended. Conflicts may arise
between the license conditions of Gigaset
Communications GmbH and the Open
Source software license conditions. In such
cases, the Open Source software license conditions have priority for the relevant Open
Source parts of the software. You will find
the licence text in its original English version
on the pages that follow. The license conditions are also available at the following website: http://www.gigaset.com/opensource/
Warranty for other uses of the Open
Source software
If the programs contained in this product are
licensed as part of the GNU General Public
License (GPL), GNU Lesser General Public
License (LGPL) or another Open Source software license that requires the disclosure of
the source code, and the product does not
contain software in source code format, then
the source code and copyright information
relating to this software can be downloaded
from the following Internet site:
http://www.gigaset.com/opensource/
E-mail: kleinteileversand.com@gigaset.com
Fax:
0049 2871/91 30 29
Gigaset Communications GmbH does not
provide any warranty for Open Source software contained in this product, should it be
used for purposes other than those
intended by Gigaset Communications
GmbH for the execution of the program. The
licenses listed below define the warranty
insofar as intended by the authors and licensors for the Open Source software. Gigaset
Communications GmbH shall not accept liability for damage occurring through
changes to an Open Source software program or product configuration. Furthermore, Gigaset Communications GmbH shall
not accept liability in the event of copyright
infringement by third parties relating to the
Open Source software.
Technical support will only be provided, if
necessary, for the software in its unchanged
original condition.
Open Source Software included in the
delivery
This product contains software developed
by the University of California, Berkeley, and
its associates.
151
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
GNU General Public License
(GPL)
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 021111307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to
take away your freedom to share and change it. By
contrast, the GNU General Public License is
intended to guarantee your freedom to share and
change free software – to make sure the software
is free for all its users. This General Public License
applies to most of the Free Software Foundation's
software and to any other program whose authors
commit to using it. (Some other Free Software
Foundation software is covered by the GNU Lesser
General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring
to freedom, not price. Our General Public Licenses
are designed to make sure that you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you
receive source code or can get it if you want it, that
you can change the software or use pieces of it in
new free programs; and that you know you can do
these things.
Version 4, 16.09.2005
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights
or to ask you to surrender the rights. These restrictions translate into certain responsibilities for you
if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give
the recipients all the rights that you have. You
must make sure that they, too, receive or can get
the source code. And you must show them these
terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license
which gives you legal permission to copy, distribute and/or modify the software.
152
Also, for each author's protection and ours, we
want to make certain that everyone understands
that there is no warranty for this free software. If
the software is modified by someone else and
passed on, we want its recipients to know that
what they have is not the original, so that any
problems introduced by others will not reflect on
the original authors' reputations.
Finally, any free program is threatened constantly
by software patents. We wish to avoid the danger
that redistributors of a free program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have
made it clear that any patent must be licensed for
everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution
and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other
work which contains a notice placed by the copyright holder saying it may be distributed under
the terms of this General Public License. The "Program", below, refers to any such program or work,
and a "work based on the Program" means either
the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with
modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each
licensee is addressed as "you".
Activities other than copying, distribution and
modification are not covered by this License; they
are outside its scope. The act of running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a
work based on the Program (independent of having been made by running the Program). Whether
that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of
the Program's source code as you receive it, in any
medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License
and to the absence of any warranty; and give any
other recipients of the Program a copy of this
License along with the Program.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
You may charge a fee for the physical act of transferring a copy, and you may, at your discretion,
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work
based on the Program, and copy and distribute
such modifications or work under the terms of
Section 1 above, provided that you also meet all of
these conditions:
a) You must cause the modified files to carry
prominent notices stating that you changed
the files and the date of any change.
b) You must cause any work that you distribute
or publish, that in whole or in part contains or
is derived from the Program or any part
thereof, to be licensed as a whole at no charge
to all third parties under the terms of this
License.
c) If the modified program normally reads
commands interactively when run, you must
cause it, when running is commenced for such
interactive use in the most ordinary way, to
print or display an announcement including
an appropriate copyright notice and a notice
that there is no warranty (or else, saying that
you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy
of this License. (Exception: if the Program itself
is interactive but does not normally print such
an announcement, your work based on the
Program is not required to print an announcement.)
Version 4, 16.09.2005
These requirements apply to the modified work as
a whole. If identifiable sections of that work are
not derived from the Program, and can be reasonably considered independent and separate works
in themselves, then this License, and its terms, do
not apply to those sections when you distribute
them as separate works. But when you distribute
the same sections as part of a whole which is a
work based on the Program, the distribution of
the whole must be on the terms of this License,
whose permissions for other licensees extend to
the entire whole, and thus to each and every part
regardless of who wrote it. Thus, it is not the intent
of this section to claim rights or contest your
rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on
the Program.
In addition, mere aggregation of another work not
based on the Program with the Program (or with a
work based on the Program) on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a
work based on it, under Section 2) in object code
or executable form under the terms of Sections 1
and 2 above, provided that you also do one of the
following:
a) Accompany it with the complete corresponding machine-readable source code,
which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for
at least three years, to give any third party, for
a charge no more than your cost of physically
performing source distribution, a complete
machine-readable copy of the corresponding
source code, to be distributed under the terms
of Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you
received as to the offer to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution
and only if you received the program in object
code or executable form with such an offer, in
accord with Subsection b above.)
The source code for a work means the preferred
form of the work for making modifications to it.
For an executable work, complete source code
means all the source code for all modules it contains, plus any associated interface definition files,
plus the scripts used to control compilation and
installation of the executable. However, as a special exception, the source code distributed need
not include anything that is normally distributed
(in either source or binary form) with the major
components (compiler, kernel, and so on) of the
operating system on which the executable runs,
unless that component itself accompanies the
executable.
If distribution of executable or object code is
made by offering access to copy from a designated place, then offering equivalent access to
copy the source code from the same place counts
as distribution of the source code, even though
third parties are not compelled to copy the source
along with the object code.
153
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided
under this License. Any attempt otherwise to
copy, modify, sublicense or distribute the Program
is void, and will automatically terminate your
rights under this License. However, parties who
have received copies, or rights, from you under
this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License,
since you have not signed it. However, nothing
else grants you permission to modify or distribute
the Program or its derivative works. These actions
are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing
the Program (or any work based on the Program),
you indicate your acceptance of this License to do
so, and all its terms and conditions for copying,
distributing or modifying the Program or works
based on it.
6. Each time you redistribute the Program (or any
work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not
impose any further restrictions on the recipients'
exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
Version 4, 16.09.2005
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are
imposed on you (whether by court order, agreement or otherwise) that contradict the conditions
of this License, they do not excuse you from the
conditions of this License. If you cannot distribute
so as to satisfy simultaneously your obligations
under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the
only way you could satisfy both it and this License
would be to refrain entirely from distribution of
the Program.
If any portion of this section is held invalid or
unenforceable under any particular circumstance,
the balance of the section is intended to apply
and the section as a whole is intended to apply in
other circumstances.
154
It is not the purpose of this section to induce you
to infringe any patents or other property right
claims or to contest validity of any such claims;
this section has the sole purpose of protecting the
integrity of the free software distribution system,
which is implemented by public license practices.
Many people have made generous contributions
to the wide range of software distributed through
that system in reliance on consistent application
of that system; it is up to the author/donor to
decide if he or she is willing to distribute software
through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear
what is believed to be a consequence of the rest of
this License.
8. If the distribution and/or use of the Program is
restricted in certain countries either by patents or
by copyrighted interfaces, the original copyright
holder who places the Program under this License
may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not
thus excluded. In such a case, this License incorporates the limitation as if written in the body of this
License.
9. The Free Software Foundation may publish
revised and/or new versions of the General Public
License from time to time. Such new versions will
be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version
number. If the Program specifies a version number
of this License which applies to it and "any later
version", you have the option of following the
terms and conditions either of that version or of
any later version published by the Free Software
Foundation. If the Program does not specify a version number of this License, you may choose any
version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program
into other free programs whose distribution conditions are different, write to the author to ask for
permission. For software which is copyrighted by
the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the
two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE
THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Programs
Version 4, 16.09.2005
If you develop a new program, and you want it to
be of the greatest possible use to the public, the
best way to achieve this is to make it free software
which everyone can redistribute and change
under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each
source file to most effectively convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full
notice is found.

Copyright (C)  
This program is free software; you can redistribute it and/or modify it under the terms of the
GNU General Public License as published by the
Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
This program is distributed in the hope that it
will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along with this program; if not,
write to the Free Software Foundation, Inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307
USA
Also add information on how to contact you by
electronic and paper mail.
If the program is interactive, make it output a
short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) 

Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type `show w'. This is
free software, and you are welcome to redistribute it under certain conditions; type `show c' for
details.
The hypothetical commands `show w' and `show
c' should show the appropriate parts of the General Public License. Of course, the commands you
use may be called something other than `show w'
and `show c'; they could even be mouse-clicks or
menu items – whatever suits your program.
You should also get your employer (if you work as
a programmer) or your school, if any, to sign a
"copyright disclaimer" for the program, if necessary.
Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright
interest in the program `Gnomovision' (which
makes passes at compilers) written by James
Hacker.
, 1 April 1989, Ty Coon,
President of Vice
155
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
This General Public License does not permit incorporating your program into proprietary programs.
If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the library. If this is what
you want to do, use the GNU Lesser General Public
License instead of this License.
GNU Lesser General Public
License (LGPL)
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 021111307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL.
It also counts as the successor of the GNU Library
Public License, version 2, hence the version
number 2.1.]
Version 4, 16.09.2005
Preamble
The licenses for most software are designed to
take away your freedom to share and change it. By
contrast, the GNU General Public Licenses are
intended to guarantee your freedom to share and
change free software--to make sure the software
is free for all its users.
This license, the Lesser General Public License,
applies to some specially designated software
packages – typically libraries – of the Free Software Foundation and other authors who decide to
use it. You can use it too, but we suggest you first
think carefully about whether this license or the
ordinary General Public License is the better strategy to use in any particular case, based on the
explanations below.
When we speak of free software, we are referring
to freedom of use, not price. Our General Public
Licenses are designed to make sure that you have
the freedom to distribute copies of free software
(and charge for this service if you wish); that you
receive source code or can get it if you want it; that
you can change the software and use pieces of it
in new free programs; and that you are informed
that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these
rights or to ask you to surrender these rights.
These restrictions translate into certain responsibilities for you if you distribute copies of the
library or if you modify it.
156
For example, if you distribute copies of the library,
whether gratis or for a fee, you must give the
recipients all the rights that we gave you. You
must make sure that they, too, receive or can get
the source code. If you link other code with the
library, you must provide complete object files to
the recipients, so that they can relink them with
the library after making changes to the library and
recompiling it. And you must show them these
terms so they know their rights.
We protect your rights with a two-step method:
(1) we copyright the library, and (2) we offer you
this license, which gives you legal permission to
copy, distribute and/or modify the library.
To protect each distributor, we want to make it
very clear that there is no warranty for the free
library. Also, if the library is modified by someone
else and passed on, the recipients should know
that what they have is not the original version, so
that the original author's reputation will not be
affected by problems that might be introduced by
others.
Finally, software patents pose a constant threat to
the existence of any free program. We wish to
make sure that a company cannot effectively
restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore,
we insist that any patent license obtained for a
version of the library must be consistent with the
full freedom of use specified in this license.
Most GNU software, including some libraries, is
covered by the ordinary GNU General Public
License. This license, the GNU Lesser General Public License, applies to certain designated libraries,
and is quite different from the ordinary General
Public License. We use this license for certain
libraries in order to permit linking those libraries
into non-free programs.
When a program is linked with a library, whether
statically or using a shared library, the combination of the two is legally speaking a combined
work, a derivative of the original library. The ordinary General Public License therefore permits
such linking only if the entire combination fits its
criteria of freedom. The Lesser General Public
License permits more lax criteria for linking other
code with the library.
We call this license the "Lesser" General Public
License because it does Less to protect the user's
freedom than the ordinary General Public License.
It also provides other free software developers
Less of an advantage over competing non-free
programs. These disadvantages are the reason we
use the ordinary General Public License for many
libraries. However, the Lesser license provides
advantages in certain special circumstances.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
Version 4, 16.09.2005
For example, on rare occasions, there may be a
special need to encourage the widest possible use
of a certain library, so that it becomes a de-facto
standard. To achieve this, non-free programs must
be allowed to use the library. A more frequent
case is that a free library does the same job as
widely used non-free libraries. In this case, there is
little to gain by limiting the free library to free software only, so we use the Lesser General Public
License.
In other cases, permission to use a particular
library in non-free programs enables a greater
number of people to use a large body of free software. For example, permission to use the GNU C
Library in non-free programs enables many more
people to use the whole GNU operating system, as
well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less
protective of the users' freedom, it does ensure
that the user of a program that is linked with the
Library has the freedom and the wherewithal to
run that program using a modified version of the
Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on
the library" and a "work that uses the library". The
former contains code derived from the library,
whereas the latter must be combined with the
library in order to run.
GNU LESSER GENERAL PUBLIC
LICENSE
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software
library or other program which contains a notice
placed by the copyright holder or other authorized party saying it may be distributed under the
terms of this Lesser General Public License (also
called "this License"). Each licensee is addressed as
"you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which
use some of those functions and data) to form
executables.
The "Library", below, refers to any such software
library or work which has been distributed under
these terms. A "work based on the Library" means
either the Library or any derivative work under
copyright law: that is to say, a work containing the
Library or a portion of it, either verbatim or with
modifications and/or translated straightforwardly
into another language. (Hereinafter, translation is
included without limitation in the term "modification".)
"Source code" for a work means the preferred
form of the work for making modifications to it.
For a library, complete source code means all the
source code for all modules it contains, plus any
associated interface definition files, plus the
scripts used to control compilation and installation of the library.
Activities other than copying, distribution and
modification are not covered by this License; they
are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the
Library does and what the program that uses the
Library does.
1. You may copy and distribute verbatim copies of
the Library's complete source code as you receive
it, in any medium, provided that you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to
this License and to the absence of any warranty;
and distribute a copy of this License along with
the Library.
157
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
You may charge a fee for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee.
Version 4, 16.09.2005
2. You may modify your copy or copies of the
Library or any portion of it, thus forming a work
based on the Library, and copy and distribute such
modifications or work under the terms of Section
1 above, provided that you also meet all of these
conditions:
a) The modified work must itself be a software
library.
b) You must cause the files modified to carry
prominent notices stating that you changed
the files and the date of any change.
c) You must cause the whole of the work to be
licensed at no charge to all third parties under
the terms of this License.
d) If a facility in the modified Library refers to a
function or a table of data to be supplied by an
application program that uses the facility,
other than as an argument passed when the
facility is invoked, then you must make a good
faith effort to ensure that, in the event an
application does not supply such function or
table, the facility still operates, and performs
whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely
well-defined independent of the application.
Therefore, Subsection 2d requires that any
application-supplied function or table used by
this function must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as
a whole. If identifiable sections of that work are
not derived from the Library, and can be reasonably considered independent and separate works
in themselves, then this License, and its terms, do
not apply to those sections when you distribute
them as separate works. But when you distribute
the same sections as part of a whole which is a
work based on the Library, the distribution of the
whole must be on the terms of this License, whose
permissions for other licensees extend to the
entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim
rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the
right to control the distribution of derivative or
collective works based on the Library.
158
In addition, mere aggregation of another work not
based on the Library with the Library (or with a
work based on the Library) on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may opt to apply the terms of the ordinary
GNU General Public License instead of this License
to a given copy of the Library. To do this, you must
alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public
License, version 2, instead of to this License. (If a
newer version than version 2 of the ordinary GNU
General Public License has appeared, then you
can specify that version instead if you wish.) Do
not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This
option is useful when you wish to copy part of the
code of the Library into a program that is not a
library.
4. You may copy and distribute the Library (or a
portion or derivative of it, under Section 2) in
object code or executable form under the terms of
Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be
distributed under the terms of Sections 1 and 2
above on a medium customarily used for software
interchange.
If distribution of object code is made by offering
access to copy from a designated place, then
offering equivalent access to copy the source
code from the same place satisfies the requirement to distribute the source code, even though
third parties are not compelled to copy the source
along with the object code.
5. A program that contains no derivative of any
portion of the Library, but is designed to work
with the Library by being compiled or linked with
it, is called a "work that uses the Library". Such a
work, in isolation, is not a derivative work of the
Library, and therefore falls outside the scope of
this License.
However, linking a "work that uses the Library"
with the Library creates an executable that is a
derivative of the Library (because it contains portions of the Library), rather than a "work that uses
the library". The executable is therefore covered by
this License. Section 6 states terms for distribution
of such executables.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
Version 4, 16.09.2005
When a "work that uses the Library" uses material
from a header file that is part of the Library, the
object code for the work may be a derivative work
of the Library even though the source code is not.
Whether this is true is especially significant if the
work can be linked without the Library, or if the
work is itself a library. The threshold for this to be
true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and
small macros and small inline functions (ten lines
or less in length), then the use of the object file is
unrestricted, regardless of whether it is legally a
derivative work. (Executables containing this
object code plus portions of the Library will still
fall under Section 6.)
Otherwise, if the work is a derivative of the Library,
you may distribute the object code for the work
under the terms of Section 6. Any executables
containing that work also fall under Section 6,
whether or not they are linked directly with the
Library itself.
6. As an exception to the Sections above, you may
also combine or link a "work that uses the Library"
with the Library to produce a work containing
portions of the Library, and distribute that work
under terms of your choice, provided that the
terms permit modification of the work for the customer's own use and reverse engineering for
debugging such modifications.
You must give prominent notice with each copy of
the work that the Library is used in it and that the
Library and its use are covered by this License. You
must supply a copy of this License. If the work during execution displays copyright notices, you
must include the copyright notice for the Library
among them, as well as a reference directing the
user to the copy of this License. Also, you must do
one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for
the Library including whatever changes were
used in the work (which must be distributed
under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with
the complete machine-readable "work that
uses the Library", as object code and/or source
code, so that the user can modify the Library
and then relink to produce a modified executable containing the modified Library.
(It is understood that the user who changes
the contents of definitions files in the Library
will not necessarily be able to recompile the
application to use the modified definitions.)
b) Use a suitable shared library mechanism for
linking with the Library. A suitable mechanism
is one that (1) uses at run time a copy of the
library already present on the user's computer
system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the library, if the
user installs one, as long as the modified version is interface-compatible with the version
that the work was made with.
c) Accompany the work with a written offer,
valid for at least three years, to give the same
user the materials specified in Subsection 6a,
above, for a charge no more than the cost of
performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place,
offer equivalent access to copy the above
specified materials from the same place.
e) Verify that the user has already received a
copy of these materials or that you have
already sent this user a copy.
For an executable, the required form of the "work
that uses the Library" must include any data and
utility programs needed for reproducing the executable from it. However, as a special exception,
the materials to be distributed need not include
anything that is normally distributed (in either
source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless
that component itself accompanies the executable.
It may happen that this requirement contradicts
the license restrictions of other proprietary libraries that do not normally accompany the operating
system. Such a contradiction means you cannot
use both them and the Library together in an executable that you distribute.
7. You may place library facilities that are a work
based on the Library side-by-side in a single
library together with other library facilities not
covered by this License, and distribute such a
combined library, provided that the separate distribution of the work based on the Library and of
the other library facilities is otherwise permitted,
and provided that you do these two things:
a) Accompany the combined library with a
copy of the same work based on the Library,
uncombined with any other library facilities.
This must be distributed under the terms of
the Sections above.
b) Give prominent notice with the combined
library of the fact that part of it is a work based
on the Library, and explain where to find the
accompanying uncombined form of the same
work.
159
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
8. You may not copy, modify, sublicense, link with,
or distribute the Library except as expressly provided under this License. Any attempt otherwise
to copy, modify, sublicense, link with, or distribute
the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you
under this License will not have their licenses terminated so long as such parties remain in full
compliance.
9. You are not required to accept this License,
since you have not signed it. However, nothing
else grants you permission to modify or distribute
the Library or its derivative works. These actions
are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing
the Library (or any work based on the Library), you
indicate your acceptance of this License to do so,
and all its terms and conditions for copying, distributing or modifying the Library or works based
on it.
Version 4, 16.09.2005
10. Each time you redistribute the Library (or any
work based on the Library), the recipient automatically receives a license from the original licensor
to copy, distribute, link with or modify the Library
subject to these terms and conditions. You may
not impose any further restrictions on the recipients' exercise of the rights granted herein. You are
not responsible for enforcing compliance by third
parties with this License.
11. If, as a consequence of a court judgment or
allegation of patent infringement or for any other
reason (not limited to patent issues), conditions
are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse you
from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may
not distribute the Library at all. For example, if a
patent license would not permit royalty-free redistribution of the Library by all those who receive
copies directly or indirectly through you, then the
only way you could satisfy both it and this License
would be to refrain entirely from distribution of
the Library.
If any portion of this section is held invalid or
unenforceable under any particular circumstance,
the balance of the section is intended to apply,
and the section as a whole is intended to apply in
other circumstances.
160
It is not the purpose of this section to induce you
to infringe any patents or other property right
claims or to contest validity of any such claims;
this section has the sole purpose of protecting the
integrity of the free software distribution system
which is implemented by public license practices.
Many people have made generous contributions
to the wide range of software distributed through
that system in reliance on consistent application
of that system; it is up to the author/donor to
decide if he or she is willing to distribute software
through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear
what is believed to be a consequence of the rest of
this License.
12. If the distribution and/or use of the Library is
restricted in certain countries either by patents or
by copyrighted interfaces, the original copyright
holder who places the Library under this License
may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not
thus excluded. In such case, this License incorporates the limitation as if written in the body of this
License.
13. The Free Software Foundation may publish
revised and/or new versions of the Lesser General
Public License from time to time. Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version
number. If the Library specifies a version number
of this License which applies to it and "any later
version", you have the option of following the
terms and conditions either of that version or of
any later version published by the Free Software
Foundation. If the Library does not specify a
license version number, you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library
into other free programs whose distribution conditions are incompatible with these, write to the
author to ask for permission. For software which is
copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will
be guided by the two goals of preserving the free
status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / appendix.fm / 24.05.11
Appendix
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE
LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE LIBRARY "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE LIBRARY IS WITH
YOU. SHOULD THE LIBRARY PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE
LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE
THE LIBRARY (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Libraries
If you develop a new library, and you want it to be
of the greatest possible use to the public, we recommend making it free software that everyone
can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General
Public License).
To apply these terms, attach the following notices
to the library. It is safest to attach them to the start
of each source file to most effectively convey the
exclusion of warranty; and each file should have at
least the "copyright" line and a pointer to where
the full notice is found.

Copyright (C)  
This library is free software; you can redistribute
it and/or modify it under the terms of the GNU
Lesser General Public License as published by
the Free Software Foundation; either version
2.1 of the License, or (at your option) any later
version.
This library is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for
more details.
You should have received a copy of the GNU
Lesser General Public License along with this
library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
Also add information on how to contact you by
electronic and paper mail.
You should also get your employer (if you work as
a programmer) or your school, if any, to sign a
"copyright disclaimer" for the library, if necessary.
Here is a sample; alter the names:
Version 4, 16.09.2005
Yoyodyne, Inc., hereby disclaims all copyright
interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker.
, 1 April 1990, Ty Coon,
President of Vice
161
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
Glossary
ADSL
Asymmetric Digital Subscriber Line
Special form of DSL.
ALG
Application Layer Gateway
NAT control mechanism of a router.
Many routers with integrated NAT use ALG.
ALG lets the data packets in a VoIP connection pass and adds the public IP address of
the secure private network.
The router's ALG should be deactivated if the
VoIP provider offers a STUN server or an outbound proxy.
See also: Firewall, NAT, Outbound proxy,
STUN.
Authentication
Restriction of access to a network/service by
using an ID and password to log in.
Automatic ringback
See Ringback when the number is busy.
Block dialling
Enter the complete phone number, and correct it if necessary. Then pick up the receiver
or press the speaker key to dial the phone
number.
Broadband Internet access
See DSL.
Call divert
Version 4, 16.09.2005
= CD
Automatic diversion (CD) of a call to a different telephone number. There are three kinds
of call divert:
– CDU, Call Divert Unconditional
– CDB, Call Divert Busy
– CDNR, Call Divert No Reply
162
Call swapping
Call swapping allows you to switch between
two callers or between a conference and an
individual caller without allowing the waiting caller to listen to the call.
Call waiting
= CW
Network provider feature. A beep during a
call indicates that another caller is waiting.
You can accept or reject the second call.
You can activate/deactivate the feature.
Client
Application that requests a service from a
server.
Codec
Coder/decoder
Codec is a procedure that digitalises and
compresses analogue voice before it is sent
via the Internet, and decodes – i.e., translates
into analogue voice – digital data when
voice packets are received. There are different codecs, with differing degrees of compression, for instance.
Both parties involved in the telephone connection (caller/sender and recipient) must
use the same codec. This is negotiated
between the sender and the recipient when
establishing a connection.
The choice of codec is a compromise
between voice quality, transmission speed
and the necessary bandwidth. A high level
of compression, for example, means that the
bandwidth required for each voice connection is low. However, it also means that the
time needed to compress/decompress the
data is greater, which increases execution
time for data in the network and thus
impairs voice quality. The time required
increases the delay between the sender
speaking and the recipient hearing what has
been said.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
COLP/COLR
Connected Line Identification Presentation/
Restriction
Feature provided by a VoIP connection for
outgoing calls.
COLP displays the phone number accepting
the call on the calling party's display unit.
The number of the party accepting the call is
different to the dialled number, e.g., if the
call is diverted or transferred.
The called party can use COLR (Connected
Line Identification Restriction) to prevent
the number from appearing on the calling
party's display.
Consultation call
You are on a call. With a consultation call,
you interrupt the conversation briefly to
establish a second connection to another
participant. If you end the connection to this
participant immediately, then this was a
consultation call. If you switch between
the first and second participant, it is called
Call swapping.
DHCP
Version 4, 16.09.2005
Dynamic Host Configuration Protocol
Internet protocol that handles the automatic
assignment of IP addresses to Network
subscribers. The protocol is made available
in the network by a server. A DHCP server
can, for example, be a router.
The phone contains a DHCP client. A router
that contains a DHCP server can assign the IP
addresses for the phone automatically from
a defined address block. The dynamic
assignment means that several Network
subscribers can share one IP address,
although they use it alternately and not
simultaneously.
With some routers you can specify that the
IP address for the phone is never changed.
Display name
VoIP provider feature. You can specify any
name that is to be shown to the other party
during a call instead of your phone number.
DMZ (Demilitarised Zone)
DMZ describes a part of a network that is
outside the firewall.
A DMZ is set up, as it were, between a network you want to protect (e.g., a LAN) and a
non-secure network (e.g., the Internet).
A DMZ permits unrestricted access from the
Internet to only one or a few network components, while the other network components remain secure behind the firewall.
DNS
Domain Name System
Hierarchical system that permits the assignment of IP addresses to Domain names that
are easier to memorise. This assignment has
to be managed by a local DNS server in each
(W)LAN. The local DNS server determines
the IP address, if necessary by enquiring
about superordinate DNS servers and other
local DNS servers on the Internet.
You can specify the IP address of the primary/secondary DNS server.
See also: DynDNS.
Domain name
Name of one (of several) web server(s) on
the Internet (e.g., Gigaset.net). The domain
name is assigned to the relevant IP address
by DNS.
DSCP
Differentiated Service Code Point
See Quality of Service (QoS).
DSL
Digital Subscriber Line
Data transfer technology that allows Internet access with e.g., 1.5 Mbps over a conventional telephone line. Prerequisites: DSL
modem and the appropriate service offered
by the Internet provider.
DSLAM
Digital Subscriber Line Access Multiplexer
The DSLAM is a switch cabinet in an
exchange at which all subscriber connectors
converge.
DTMF
Dual Tone Multi-Frequency
163
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
Dynamic IP address
A dynamic IP address is assigned to a network component automatically via DHCP.
The dynamic IP address for a network component can change every time it registers or
at certain time intervals.
See also: Fixed IP address
DynDNS
Dynamic DNS
Domain names and IP addresses are
assigned via DNS. For Dynamic IP addresses
this service is enhanced with "Dynamic
DNS". This permits the use of a network component with a dynamic IP address as a
Server on the Internet. DynDNS ensures
that a service can always be addressed on
the Internet under the same Domain name,
regardless of the current IP address.
ECT
Explicit Call Transfer
Participant A calls participant B. The participant puts the connection on hold and calls
participant C. Rather than connect everyone
in a three-party conference, A now transfers
participant B to C and hangs up.
EEPROM
Electrically Eraseable Programmable Read Only
Memory
Version 4, 16.09.2005
Memory building block in your phone with
fixed data (e.g., default and customised settings) and data saved automatically (e.g., call
list entries).
Ethernet network
Wired LAN.
164
Firewall
You can use a firewall to protect your network against unauthorised external access.
This involves combining various measures
and technologies (hardware and/or software) to control the flow of data between a
private network you wish to protect and an
unprotected network (e.g., the Internet).
See also: NAT.
Firmware
Device software in which basic information
is saved for the functioning of a device. To
correct errors or update the device software,
a new version of the firmware can be loaded
into the device's memory (firmware update).
Fixed IP address
A fixed IP address is assigned to a network
component manually during network configuration. Unlike the Dynamic IP address, a
fixed IP address does not change.
Flat rate
Billing system for an Internet connection.
The Internet provider charges a set monthly
fee. There are no additional charges for the
duration of the connection or number of
connections.
Fragmentation
Data packets that are too big are split into
smaller packets (fragments) before they are
transferred. They are put together again
when they reach the recipient (defragmented).
Full duplex
Data transmission is a mode in which data
can be sent and received at the same time.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
Version 4, 16.09.2005
G.711 a law, G.711 μ law
Standard for a Codec.
G.711 delivers a very good voice quality that
corresponds to that in the network. As there
is little compression, the necessary bandwidth is around 64 kbit/s per voice connection, but the delay caused by coding/decoding is only approx. 0.125 ms.
"a law" describes the European standard and
"μ law" describes the North American/Japanese equivalent.
G.722
Standard for a Codec.
G.722 is a broadband language codec with a
bandwidth of 50 Hz to 7 kHz, a net transmission rate of 64 kbit/s per voice connection
and integrated speech pause recognition
and comfort noise generation (silence suppression).
G.722 delivers very good voice quality. A
higher sampling rate provides clearer and
better voice quality than with other codecs
and enables a speech tone in High Definition
Sound Performance (HDSP).
G.726
Standard for a Codec.
G.726 delivers a good voice quality. It is inferior to the quality with codec G.711 but better than with G.729.
G.729A/B
Standard for a Codec.
The voice quality is more likely to be lower
with G.729A/B. As a result of the high level of
compression, the necessary bandwidth is
only around 8 kbit/s per voice connection,
but the delay is around 15 ms.
Gateway
Connects two different Networks,
e.g., a router as an Internet gateway.
For phone calls from VoIP to the telephone
network, a gateway has to be connected to
the IP network and the telephone network
(gateway/VoIP provider). It forwards calls
from VoIP to the telephone network as
required.
Gateway provider
See SIP provider.
Global IP address
See IP address.
GSM
Global System for Mobile Communication
Originally, a European standard for mobile
networks. GSM can now be described as a
worldwide standard. However, in the USA
and Japan, national standards were previously more frequently supported.
Headset
Combination of microphone and
headphone. A headset enables a
comfortable hands free mode. Headsets that
can be connected to the base via a cable
(wire-bound) or via Bluetooth (wireless) are
available.
HTTP Proxy
Server via which the Network subscribers
can process their Internet traffic.
Hub
Uses one Infrastructure network to connect
several Network subscribers. All data sent to
the hub by one network subscriber is forwarded to all network subscribers.
See also: Gateway, Router.
165
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
IEEE
Institute of Electrical and Electronics Engineers
Version 4, 16.09.2005
International body that defines standards in
electronics and electrical engineering, concerned in particular with the standardisation
of LAN technology, transmission protocols,
data transfer rate and wiring.
Infrastructure network
Network with central structure: All Network
subscribers communicate via a central
Router.
Internet
Global WAN. A series of protocols known as
TCP/IP have been defined for exchanging
data.
All Network subscribers are identifiable via
their IP address. DNS assigns a Domain
name to the IP address.
Important services on the Internet include
the World Wide Web (WWW), e-mail, file
transfer and discussion forums.
Internet Service Provider
Enables access to the Internet for a fee.
IP (Internet Protocol)
TCP/IP protocol on the Internet. IP is responsible for addressing subscribers in a
Network using IP addresses and routes data
from the sender to the recipient. IP determines the paths (routing) along which the
data packets travel.
166
IP address
A unique address for a network component
within a network based on the TCP/IP protocols (e.g., LAN, Internet). On the Internet,
domain names are usually assigned instead
of IP addresses. DNS assigns the corresponding IP address to the domain name.
The IP address has four parts (decimal numbers between 0 and 255) separated by full
stops (e.g., 230.94.233.2).
The IP address is made up of the network
number and the number of the Network
subscriber (e.g., phone). Depending on the
Subnet mask, the first one, two or three
parts make up the network number and the
rest of the IP address addresses the network
component. The network number of all the
components in any one network must be
identical.
IP addresses can be assigned automatically
with DHCP (dynamic IP addresses) or manually (static IP addresses).
See also: DHCP.
IP pool range
Range of IP addresses that the DHCP server
can use to assign dynamic IP addresses.
LAN
Local Area Network
Network with a restricted physical range.
A LAN can be wireless (WLAN) and/or wired.
Local IP address
The local or private IP address is the address
for a network component in the local network (LAN). The network operator can assign
any address he or she wants. Devices that act
as a link from a local network to the Internet
(gateway or router) have a public and a private IP address.
See also IP address.
Local SIP port
See SIP port/local SIP port.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
MAC address
NAT
Media Access Control address
Network Address Translation
Hardware address by means of which
each network device (e.g., network card,
switch, phone) can be uniquely identified
worldwide. It consists of six parts
(hexadecimal numbers) separated by "-"
(e.g., 00-90-65-44-00-3A).
The MAC address is assigned by the manufacturer and cannot be changed.
Mbps
Method for converting (private) IP
addresses to one or more (public) IP
addresses. NAT enables the IP addresses of
Network subscribers (e.g., VoIP telephones)
in a LAN concealed behind a shared IP
address for the Routers on the Internet.
VoIP telephones behind a NAT router cannot
be reached by VoIP servers (on account of
the private IP address). To "get around" NAT,
it is possible to use either ALG in the router,
STUN in the VoIP telephone, or for the VoIP
provider to use an Outbound proxy.
If an outbound proxy is made available, you
must allow for this in the VoIP settings for
your phone.
Network
Group of devices. Devices can be connected
in either wired or wireless mode.
Networks can also differ in range and structure:
– Range: Local networks (LAN) or widearea networks (WAN)
– Structure: Infrastructure network or
ad-hoc network
Network subscriber
Devices and PCs that are connected to each
other in a network e.g., servers, PCs and
phones.
Million bits per second
Unit of the transmission speed in a network.
MRU
Maximum Receive Unit
Defines the maximum user data volume
within a data packet.
MSN
Multiple Subscriber Number. You can
request up to 10 different telephone numbers for the multiple connection. An MSN is
one of the phone numbers assigned to you
without the local area code.
Your telephone uses the MSN in line with
your requirements, as a receive connection
and/or send connection.
MTU
Maximum Transmission Unit
Version 4, 16.09.2005
Defines the maximum length of a data
packet that can be carried over the network
at a time.
Music on hold
Music that is played while you are on a
Consultation call or during Call swapping.
The waiting participant hears music while
on hold.
Outbound proxy
Alternative NAT control mechanism to STUN
and ALG.
Outbound proxies are implemented by the
VoIP provider in firewall/NAT environments
as an alternative to SIP proxy server. They
control data traffic through the firewall.
Outbound proxy and STUN servers should
not be used simultaneously.
See also: STUN and NAT.
167
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
Paging (handset search)
Base function for locating the registered
handsets. The base establishes a connection
to every registered handset. The handsets
start to ring.
PIN
Personal Identification Number
Version 4, 16.09.2005
Protects against unauthorised use. When
the PIN is activated, a number combination
has to be entered to access a protected area.
You can protect your base configuration
data with a system PIN (4-digit number combination).
Port
Data is exchanged between two applications in a Network via a port.
Port forwarding
The Internet gateway (e.g., your router) forwards data packets from the Internet that
are directed to a certain Port to the port concerned. This allows servers in the LAN to
offer services on the Internet without you
needing a public IP address.
Port number
Indicates a specific application of a Network
subscriber. Depending on the setting in the
LAN, the port number is permanently
assigned or it is assigned with each access.
The combination of IP address/Port number
uniquely identifies the recipient or sender of
a data packet within a network.
Pre-dialling
See Block dialling.
Private IP address
See Public IP address.
Protocol
Describes the agreements for communicating within a Network. It contains rules for
opening, administering and closing a connection, about data formats, time frames
and possible error handling.
168
Proxy/Proxy server
Computer program that controls the
exchange of data between Client and
Server in computer networks. If the phone
sends a query to the VoIP server, the proxy
acts as a server towards the phone and as a
client towards the server. A proxy is
addressed via IP address/Domain name and
Port.
Public IP address
The public IP address is the address for a
network component on the Internet. It is
assigned by the Internet Service Provider.
Devices that act as a link from a local network to the Internet (gateway, router) have
a public and a local IP address.
See also: IP address, NAT
Quality of Service (QoS)
Describes the quality of service in communication networks. Differentiations are made
between various quality of service classes.
QoS influences the flow of data packets on
the Internet e.g., by prioritising data packets,
reserving bandwidth and optimising data
packets.
In VoIP networks, QoS influences the voice
quality. If the whole infrastructure (router,
network server etc.) has QoS, the voice quality is better, i.e., fewer delays, less echoing,
less crackling.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
RAM
Random Access Memory
Memory in which you have reading and storage rights. Items such as melodies and logos
are saved in the RAM after you have loaded
them onto the phone via the Web configurator.
Registrar
The registrar manages the Network subscribers' current IP addresses. When you register with your VoIP provider, your current IP
address is saved on the registrar. This means
you can also be reached when on the move.
Ringback when the call is not answered
= CCNR (Completion of calls on no reply).
If a party does not reply when called, a caller
can arrange an automatic ringback. As soon
as the destination phone has completed a
call and is free again, the caller is called back.
This feature must be supported by the
exchange. The ringback request is automatically cancelled after about two hours
(depending on the network provider).
Ringback when the number is busy
= CCBS (Completion of calls to busy subscriber). If a caller hears the busy tone, he
or she can activate the ringback function.
As soon as the connection is free, the caller is
called back. As soon as the caller lifts the
receiver, the connection is made automatically.
ROM
Read Only Memory
Version 4, 16.09.2005
A type of memory that can only be read.
Router
Routes data packets within a network and
between different networks via the quickest
route. Can connect Ethernet networks and
WLAN. Can be a Gateway to the Internet.
Routing
Routing is the transfer of data packets to
another subscriber in your network. On their
way to the recipient, the data packets are
sent from one router to the next until they
reach their destination.
If data packets were not forwarded in this
way, a network like the Internet would not
be possible. Routing connects the individual
networks to this global system.
A router is a part of this system; it transfers
data packets both within a local network
and from one network to the next. Transfer
of data from one network to another is performed on the basis of a common protocol.
RTP
Real-Time Transport Protocol
Global standard for transferring audio and
video data. Often used in conjunction with
UDP. In this case, RTP packets are embedded
in UDP packets.
RTP port
(Local) Port that is used to send and receive
voice data packets for VoIP.
Server
Provides a service to other Network subscribers (Clients). The term can indicate a computer/PC or an application. A server is
addressed via IP address/Domain name and
Port.
SIP (Session Initiation Protocol)
Signalling protocol independent of voice
communication. Used for establishing and
ending a call. It is also possible to define
parameters for voice transmission.
SIP address
See URI.
SIP port/local SIP port
(Local) Port that is used to send and receive
SIP signalling data for VoIP.
SIP provider
See VoIP provider.
169
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
SIP proxy server
IP address of your VoIP provider's gateway
server.
Static IP address
See Fixed IP address.
STUN
Simple Transversal of UDP over NAT
NAT control mechanism.
STUN is a data protocol for VoIP telephones.
STUN replaces the private IP address in the
VoIP telephone data packets with the public
address of the secure private network. To
control data transfer, a STUN server is also
required on the Internet. STUN cannot be
implemented with symmetric NATs.
See also: ALG, Firewall, NAT, Outbound
proxy.
Subnet
Segment of a Network.
Subnet mask
IP addresses consist of a fixed line number
and a variable subscriber number. The network number is identical for all Network
subscribers. The size of the network number
part is determined in the subnet mask. In the
subnet mask 255.255.255.0, for example, the
first three parts of the IP address are the network number and the last part is the subscriber number.
Symmetric NAT
Version 4, 16.09.2005
A symmetric NAT assigns different external
IP addresses and port numbers to the same
internal IP addresses and port numbers –
depending on the external target address.
170
TCP
Transmission Control Protocol
Transport protocol. Session-based transmission protocol: it sets up, monitors and
terminates a connection between sender
and recipient for transporting data.
TLS
Transport Layer Security
Protocol for encrypting data transmissions
on the Internet. TLS is a superordinated
Transport protocol.
Transmission rate
Speed at which data is transmitted in the
WAN or LAN. The transmission rate is measured in data units per unit of time (Mbit/s).
Transport protocol
Controls data transport between two communication partners (applications).
See also: UDP, TCP, TLS.
UDP
User Datagram Protocol
Transport protocol. Unlike TCP, UDP is a
non session-based protocol. UDP does not
establish a fixed connection. The data packets ("datagrams") are sent as a broadcast.
The recipient is solely responsible for making sure the data is received. The sender is
not notified about whether it is received or
not.
URI
Uniform Resource Identifier
Character string for identifying resources
(e.g., e-mail recipient, http://gigaset.com,
files).
On the Internet, URIs are used as a uniform
identification for resources. URIs are also
described as SIP addresses.
URIs can be entered in the phone as a
number. By dialling a URI, you can call an
Internet subscriber with VoIP equipment.
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Glossary.fm / 24.05.11
Glossary
URL
Universal Resource Locator
Globally unique address of a domain on the
Internet.
A URL is a subtype of the URI. URLs identify a
resource by its location on the Internet.
For historical reasons the term is often used
as a synonym for URI.
User name
User ID
Name/number combination for access e.g.,
to your VoIP account or your private address
directory on the Internet.
Voice codec
See Codec.
VoIP
Voice over Internet Protocol
Telephone calls are no longer placed and
transmitted over the telephone network but
over the Internet (or other IP networks).
VoIP provider
A VoIP, SIP or Gateway provider is an Internet service provider that provides a
Gateway for Internet telephony. As the
phone works with the SIP standard, your
provider must support the SIP standard.
The provider routes calls from VoIP to the telephone network (analogue, and mobile)
and vice versa.
WAN
Wide Area Network
Version 4, 16.09.2005
Wide-area network that is unrestricted in
terms of area (e.g., Internet).
171
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / accessories_SAG.fm / 24.05.11
Accessories
Accessories
Gigaset handsets
Upgrade your Gigaset to a cordless PABX:
Gigaset SL400H handset
Genuine metal frame and keypad
High-quality keypad illumination
1.8´´ TFT colour display
Bluetooth® and mini USB
Directory for up to 500 vCards
Talk/standby time of up to 14h/230h
Large font for call lists and directory
Brilliant sound quality in handsfree mode:
4 handsfree settings
u Caller pictures, slide show and screensaver
(analogue and digital clock)
u Silent alert, download ringtones
u ECO DECT
u Alarm clock
u Calendar with appointment scheduler
u Night mode with time-controlled ringtone deactivation
u No interruptions from unknown calls
u Room monitor, One Touch Call mode
www.gigaset.com/gigasetsl400h
Gigaset S810H handset
Version 4, 16.09.2005
Brilliant sound quality in handsfree mode
High-quality genuine metal keypad with illumination
Plus/minus key for simple volume control
1.8´´ TFT colour display
Bluetooth® and mini USB
Directory for up to 500 vCards
Talk/standby time of up to 13h/180h, standard batteries
Large font for call lists and directory
Brilliant sound quality in handsfree mode:
4 handsfree settings
u Caller pictures, screensaver (analogue and digital clock)
u Download ringtones
u ECO DECT
u Alarm clock
u Calendar with appointment scheduler
u Night mode with time-controlled ringtone deactivation
u No interruptions from unknown calls
u Room monitor, One Touch Call mode
www.gigaset.com/gigasets810h
172
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / accessories_SAG.fm / 24.05.11
Accessories
Gigaset C610H handset
u Social life management with room monitor and birthday
reminders, One Touch Call mode
Individual programming of ringtones with 6 VIP-groups
High-quality keypad with illumination
1.8´´ TFT colour display
Directory for up to 150 vCards
Talk/standby time of up to 12h/180h, standard batteries
Large font for call lists and directory
Brilliant sound quality in handsfree mode
Screensaver (digital clock)
ECO DECT
Alarm clock
Night mode with time-controlled ringtone deactivation
No interruptions from unknown calls
Room monitor, One Touch Call mode
www.gigaset.com/gigasetc610h
Gigaset SL78H handset
Version 4, 16.09.2005
Real metal frame
Modern keypad with high-quality illumination
2.2´´ TFT QVGA colour display
Bluetooth® and mini USB
Directory for up to 500 vCards
Talk/standby time of up to 14h/200h
Brilliant sound quality in handsfree mode
Caller pictures, slide show and screensaver (analogue and
digital clock)
u Download ringtones
u ECO DECT
u Alarm clock
u Calendar with appointment scheduler
u Night mode with time-controlled ringtone deactivation
u Room monitor
www.gigaset.com/gigasetsl78h
173
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / accessories_SAG.fm / 24.05.11
Accessories
Gigaset E49H handset
Resistant to shocks, dust and water splashes
Hardy illuminated keypad
Colour display
Directory for up to 150 entries
Talk/standby time of up to 12h/250h
Standard batteries
u Brilliant sound quality in handsfree mode
u Screensaver
u ECO DECT
u Alarm clock
u Room monitor
www.gigaset.com/gigasete49h
L410 handsfree clip for cordless phones
Move during a call without any restrictions
Handy clip belt
Brilliant sound quality in speaker mode
Weight approx. 30 g
ECO-DECT
Five different volume levels
Status indication via LED
Talk/standby time of up to 5 hrs/120 hrs
Range of up to 50 m indoors and up to 300 m outdoors
www.gigaset.com/gigasetl410
Compatibility
For more information on handset functions in relation to Gigaset bases, please visit:
www.gigaset.com/compatibility
Version 4, 16.09.2005
All accessories and batteries are available from your phone retailer.
Use only original accessories. This will avoid possible health risks and personal
injury, and also ensure that all the relevant regulations are complied with.
174
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnSIX.fm / 24.05.11
Index
Index
Version 4, 16.09.2005
Access code . . . . . . . . . . . . . . . . . . . . . . . . . 133
for a PABX . . . . . . . . . . . . . . . . . . . . . . . . . 133
Access protection . . . . . . . . . . . . . . . . . . . . 124
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Acknowledge tones . . . . . . . . . . . . . . . . . . 122
Activating
advisory tones . . . . . . . . . . . . . . . . . . . . . 122
answering machine . . . . . . . . . . . . . . . . . 90
answering machine
(remote operation). . . . . . . . . . . . . . 96
appointment . . . . . . . . . . . . . . . . . . . . . . 100
call divert . . . . . . . . . . . . . . . . . . . . . . . . . . 58
FAX port. . . . . . . . . . . . . . . . . . . . . . . . . . . 130
network mailbox . . . . . . . . . . . . . . . . . . . . 97
two-way recording . . . . . . . . . . . . . . . . . . 94
withholding phone numbers. . . . . . . . . 58
Adapter plug
power saving . . . . . . . . . . . . . . . . . . . . . . 100
ADSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Alert tone . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
ALG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Anniversary . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
deactivating . . . . . . . . . . . . . . . . . . . . . . . . 74
missed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
saving in directory . . . . . . . . . . . . . . . . . . 73
Announcement (answering machine) . . . 91
Anonymous calling . . . . . . . . . . . . . . . . . . . . 58
Answer only mode
(answering machine) . . . . . . . . . . . . . . 89
Answering machine . . . . . . . . . . . . . . . . . . . 89
activating/deactivating . . . . . . . . . . . . . . 90
define for quick dial . . . . . . . . . . . . . . . . . 98
deleting messages . . . . . . . . . . . . . . . . . . 93
playing back messages . . . . . . . . . . . . . . 92
recording a personal announcement/
advisory message . . . . . . . . . . . . . . . 91
remote operation . . . . . . . . . . . . . . . . . . . 95
skipping back . . . . . . . . . . . . . . . . . . . . . . . 92
skipping forward . . . . . . . . . . . . . . . . . . . . 92
Answering machine list . . . . . . . . . . . . . 66, 68
Application Layer Gateway (ALG) . . . . . . 162
Appointment/anniversary
displaying missed . . . . . . . . . . . . . . . . . . 102
Appointments . . . . . . . . . . . . . . . . . . . . . . . 100
activating/deactivating . . . . . . . . . . . . . 102
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
managing . . . . . . . . . . . . . . . . . . . . . . . . . 102
Area code
setting own area code . . . . . . . . . . . . . . 124
Assigning
function keys . . . . . . . . . . . . . . . . . . . . . . 116
key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
number key . . . . . . . . . . . . . . . . . . . . . . . 116
Asymmetric Digital Subscriber Line . . . . 162
Authentication . . . . . . . . . . . . . . . . . . . . . . . 162
Auto configuration code . . . . . . . . . . . . . . . 23
Automatic redial . . . . . . . . . . . . . . . . . . . 65, 66
Base
connecting to PABX . . . . . . . . . . . . . . . . 133
connecting with router . . . . . . . . . . . . . . 16
power consumption. . . . . . . . . . . . . . . . 148
restoring to default settings. . . . . . . . . 131
setting up . . . . . . . . . . . . . . . . . . . 11, 12, 123
system PIN . . . . . . . . . . . . . . . . . . . . . . . . 124
updating firmware . . . . . . . . . . . . . . . . . 129
Birthday, see Anniversary
Block dialling . . . . . . . . . . . . . . . . . . . . . . . . 162
Bluetooth
activating . . . . . . . . . . . . . . . . . . . . . . . . . 108
changing device name . . . . . . . . . 111, 112
de-registering devices . . . . . . . . . . . . . . 110
list of known devices . . . . . . . . . . . . . . . 110
registering devices . . . . . . . . . . . . . . . . . 109
setting own area code . . . . . . . . . . . . . . 124
transferring directory (vCard) . . . . . . . . 72
using data devices . . . . . . . . . . . . . . . . . 112
using GSM mobiles . . . . . . . . . . . . . . . . . 113
Bluetooth headset
accepting a call . . . . . . . . . . . . . . . . . . . . . 53
making calls with . . . . . . . . . . . . . . . . . . . 51
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Brightness
display backlight . . . . . . . . . . . . . . . . . . . 119
Broadband connections . . . . . . . . . . . . . . . 56
Broadband Internet access . . . . . . . . . . . . 162
Broadband voice codec . . . . . . . . . . . . . . . 165
Busy on Busy . . . . . . . . . . . . . . . . . . . . . . . . . 60
Call
accepting . . . . . . . . . . . . . . . . . . . . . . . . . . 52
175
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnSIX.fm / 24.05.11
Index
Version 4, 16.09.2005
accepting (GSM connection) . . . . . . . . . 53
accepting on a headset . . . . . . . . . . . . . . 53
ending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
ending on the headset . . . . . . . . . . . . . . 52
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
picking up from answering
machine . . . . . . . . . . . . . . . . . . . . . . . 93
transferring . . . . . . . . . . . . . . . . . . . . . 63, 134
transferring (connecting) . . . . . . . . 63, 106
two-way recording . . . . . . . . . . . . . . . . . . 94
unknown call rejection . . . . . . . . . . . . . . 60
Call divert . . . . . . . . . . . . . . . . . . . . . . . . 58, 162
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . . 58
Call duration . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Call screening during recording . . . . . . . . 94
Call swapping . . . . . . . . . . . . . . . . . . . . . 63, 162
Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . 162
accepting/rejecting . . . . . . . . . . . . . . . . . 62
activating/deactivating . . . . . . . . . . . . . . 60
external call . . . . . . . . . . . . . . . . . . . . . . . . 59
internal call . . . . . . . . . . . . . . . . . . . . . . . . 107
withholding once (fixed line) . . . . . . . . . 61
Call-by-call numbers. . . . . . . . . . . . . . . . . . . 82
Calling
entering IP address . . . . . . . . . . . . . . . . . . 50
from classified directory . . . . . . . . . . . . . 76
from online directory . . . . . . . . . . . . . . . . 76
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . 79, 81
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
unknown . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Calling line display, notes . . . . . . . . . . . . . . 54
Calling Line Identification . . . . . . . . . . . . . . 53
Capacity
directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
resource directory . . . . . . . . . . . . . . . . . . 123
Care of the telephone . . . . . . . . . . . . . . . . 148
Changing
device name (Bluetooth). . . . . . . . 111, 112
dialling mode . . . . . . . . . . . . . . . . . . . . . . 134
display language . . . . . . . . . . . . . . . . . . . 118
176
handsfree volume . . . . . . . . . . . . . . . . . . 119
internal names . . . . . . . . . . . . . . . . . . . . . 107
internal numbers . . . . . . . . . . . . . . . . . . 108
names of internal parties . . . . . . . . . . . 107
pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
receiver volume . . . . . . . . . . . . . . . . . . . . 119
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
system PIN . . . . . . . . . . . . . . . . . . . . . . . . 124
Character set . . . . . . . . . . . . . . . . . . . . . . . . 150
Charge rates, see Call charges
Checking service information . . . . . . . . . 146
Classified directory . . . . . . . . . . . . . . . . . . . . 74
CLI, CLIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
CLIP picture . . . . . . . . . . . . . . . . . . . 54, 70, 122
CNIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Codecs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
COLP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 163
COLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 163
Conference (internal) . . . . . . . . . . . . . . . . . 106
Configuring the system settings . . . . . . . 123
Confirmation tone . . . . . . . . . . . . . . . . . . . 122
Connected Line Identification
Presentation/Restriction . . . . . . . 52, 163
Connecting
base to PABX . . . . . . . . . . . . . . . . . . . . . . 133
fax machine . . . . . . . . . . . . . . . . . . . . . . . 114
Connection wizard
starting (getting started) . . . . . . . . . . . . 24
Consultation call . . . . . . . . . . . . . . . . . . 62, 163
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Consumption of electricity, see
Power consumption
Correcting incorrect entries . . . . . . . . . . . . 40
Cost control . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Customer Care . . . . . . . . . . . . . . . . . . . . . . . 139
Data packets, fragmentation . . . . . . . . . . 164
Data transfer via Bluetooth . . . . . . . . . . . . 112
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnSIX.fm / 24.05.11
Version 4, 16.09.2005
Index
Deactivating
advisory tones . . . . . . . . . . . . . . . . . . . . . 122
answering machine . . . . . . . . . . . . . . . . . 90
appointment . . . . . . . . . . . . . . . . . . . . . . 100
call divert . . . . . . . . . . . . . . . . . . . . . . . . . . 58
FAX port. . . . . . . . . . . . . . . . . . . . . . . . . . . 130
network mailbox . . . . . . . . . . . . . . . . . . . . 97
two-way recording . . . . . . . . . . . . . . . . . . 94
withholding phone numbers. . . . . . . . . 58
DECT interface
activating/deactivating . . . . . . . . . . . . . 130
Delete key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Deleting
announcement for answering
machine . . . . . . . . . . . . . . . . . . . . . . . 92
characters . . . . . . . . . . . . . . . . . . . . . . . . . . 40
message . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
MSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Demilitarised Zone . . . . . . . . . . . . . . . . . . . 163
De-registering
devices (Bluetooth). . . . . . . . . . . . . . . . . 110
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Dialling
directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
IP address . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Dialling mode . . . . . . . . . . . . . . . . . . . . . . . . 134
Dialling pause . . . . . . . . . . . . . . . . . . . . . . . 134
Differentiated Service Code Point . . . . . . 163
Digital Subscriber Line . . . . . . . . . . . . . . . . 163
Digital Subscriber Line
Access Multiplexer . . . . . . . . . . . . . . . 163
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
copying number from text . . . . . . . . . . . 73
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . . 79
managing entries . . . . . . . . . . . . . . . . . . . 71
opening . . . . . . . . . . . . . . . . . . . . . . . . . 39, 74
order of entries . . . . . . . . . . . . . . . . . . . . . 70
saving anniversary . . . . . . . . . . . . . . . . . . 73
saving entry . . . . . . . . . . . . . . . . . . . . . . . . 69
searching for an entry . . . . . . . . . . . . . . . 75
sending entry/list to handset. . . . . . . . . 71
transferring a vCard (Bluetooth) . . . . . . 72
using to enter numbers . . . . . . . . . . . . . . 73
Display
backlight . . . . . . . . . . . . . . . . . . . . . . . . . . 119
call duration/costs . . . . . . . . . . . . . . . . . . 82
capacity (resource directory) . . . . . . . . 123
changing display language . . . . . . . . . 118
name (CNIP) . . . . . . . . . . . . . . . . . . . . . . . . 53
number (CLI/CLIP). . . . . . . . . . . . . . . . . . . 53
screensaver . . . . . . . . . . . . . . . . . . . . . . . . 118
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Display backlight
brightness of display backlight . . . . . . 119
time control . . . . . . . . . . . . . . . . . . . . . . . 119
Display keys
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Displayed name (VoIP) . . . . . . . . . . . . . . . . 163
Displaying
capacity (directory) . . . . . . . . . . . . . . . . . 71
missed appointments/
anniversaries . . . . . . . . . . . . . . . . . . 102
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
DMZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
DNS server, preferred . . . . . . . . . . . . . . . . . 125
Domain name . . . . . . . . . . . . . . . . . . . . . . . 163
Domain Name System . . . . . . . . . . . . . . . . 163
DSCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
DSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
DSLAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Dynamic DNS . . . . . . . . . . . . . . . . . . . . . . . . 164
Dynamic Host Configuration
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . 163
Dynamic IP address . . . . . . . . . . . . . . . . . . 164
DynDNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Echo service of Gigaset.net. . . . . . . . . . . . . 55
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Eco Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
ECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 134
activating/deactivating . . . . . . . . . . . . . . 60
E-mail
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
messages whilst making
a connection . . . . . . . . . . . . . . . . . . . 84
notification . . . . . . . . . . . . . . . . . . . . . . . . . 83
viewing the sender's address . . . . . . . . . 85
E-mail address
copying from the directory . . . . . . . . . . 73
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Entering user data (VoIP)
with handset . . . . . . . . . . . . . . . . . . . . . . . 28
Entry
from directory . . . . . . . . . . . . . . . . . . . . . . 70
177
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnSIX.fm / 24.05.11
Index
Environment . . . . . . . . . . . . . . . . . . . . . . . . . 147
Error tone . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Ethernet network . . . . . . . . . . . . . . . . . . . . 164
Explicit Call Transfer . . . . . . . . . . . . . . . . . . 164
External call
call waiting . . . . . . . . . . . . . . . . . . . . . . . . . 59
to ans. mach. Divert . . . . . . . . . . . . . . . . . 93
FAX port
connecting fax . . . . . . . . . . . . . . . . . . . . . 114
Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
automatic update . . . . . . . . . . . . . . . . . . 130
checking version . . . . . . . . . . . . . . . . . . . 146
starting update . . . . . . . . . . . . . . . . . . . . 129
updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Fixed IP address . . . . . . . . . . . . . . . . . . . . . . 164
Fixed line
cancelling ringback . . . . . . . . . . . . . . . . . 64
Flat rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Fragmentation of data packets . . . . . . . . 164
Full duplex . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Function key
assigning for headset . . . . . . . . . . . . . . . 116
Version 4, 16.09.2005
G.722 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Gateway provider . . . . . . . . . . . . . . . . . . . . 165
Gigaset HDSP, see HDSP
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
call divert . . . . . . . . . . . . . . . . . . . . . . . . . . 58
calling subscriber . . . . . . . . . . . . . . . . 79, 81
changing/deleting own name . . . . . . . . 80
directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
echo service . . . . . . . . . . . . . . . . . . . . . . . . 55
entering name . . . . . . . . . . . . . . . . . . . . . . 80
searching for subscribers . . . . . . . . . . . . 79
Global IP address . . . . . . . . . . . . . . . . . . . . . 165
Global System for
Mobile Communication . . . . . . . . . . 165
GNU General Public Licence . . . . . . . . . . . 151
GNU General Public License (GPL)
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
GNU Lesser General Public License. . . . . 151
GNU Lesser General Public License
(LGPL), English . . . . . . . . . . . . . . . . . . . 156
GPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Group call . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
GSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
178
GSM connection
accepting a call (Bluetooth) . . . . . . . . . . 53
activating (Bluetooth) . . . . . . . . . . . . . . 111
using via Bluetooth . . . . . . . . . . . . . . . . 113
GSM mobiles . . . . . . . . . . . . . . . . . . . . . . . . 113
Handset
changing internal number . . . . . . . . . . 108
changing name . . . . . . . . . . . . . . . . . . . . 107
contact with liquid . . . . . . . . . . . . . . . . . 148
de-registering . . . . . . . . . . . . . . . . . 104, 105
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
locating . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
registering . . . . . . . . . . . . . . . . . . . . . . . . 104
Handsfree volume. . . . . . . . . . . . . . . . . . . . 119
HDSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
accepting a call . . . . . . . . . . . . . . . . . . . . . 53
assigning function key . . . . . . . . . . . . . 116
connecting (wire-bound) . . . . . . . . 12, 115
ending a call . . . . . . . . . . . . . . . . . . . . . . . . 52
making calls with . . . . . . . . . . . . . . . . . . . 51
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
HTTP Proxy . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Icon
alarm clock . . . . . . . . . . . . . . . . . . . . . . . . 103
answering machine . . . . . . . . . . . 89, 90, 95
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
for new messages . . . . . . . . . . . . . . . . . . . 68
new message . . . . . . . . . . . . . . . . . . . . . . . 92
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Identify caller . . . . . . . . . . . . . . . . . . . . . . . . . 64
Identifying the caller . . . . . . . . . . . . . . . 52, 64
Idle status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
display in (example) . . . . . . . . . . . . . . . . . . .4
returning to . . . . . . . . . . . . . . . . . . . . . . . . 41
IEEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Incoming message list (e-mail)
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Incorrect entries (correction) . . . . . . . . . . . 40
Industry Canada Certification . . . . . . . . . 136
Info centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
navigating. . . . . . . . . . . . . . . . . . . . . . . . . . 87
Infrastructure network . . . . . . . . . . . . . . . . 166
Initiating a conference . . . . . . . . . . . . . . . . . 63
Installation wizard . . . . . . . . . . . . . . . . . . . . . 18
Institute of Electrical and
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnSIX.fm / 24.05.11
Index
Electronics Engineers. . . . . . . . . . . . . 166
Internal
conference . . . . . . . . . . . . . . . . . . . . . . . . 106
consultation . . . . . . . . . . . . . . . . . . . . . . . 106
making calls . . . . . . . . . . . . . . . . . . . . . . . 105
Internal call . . . . . . . . . . . . . . . . . . . . . . . . . . 105
call waiting . . . . . . . . . . . . . . . . . . . . . . . . 107
Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Internet access (broadband) . . . . . . . . . . 162
Internet protocol . . . . . . . . . . . . . . . . . . . . . 166
Internet Service Provider . . . . . . . . . . . . . . 166
IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . 125
automatically obtaining one . . . . . . . . 125
dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
dynamic . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
fixed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
local . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
private . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
public . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
IP configuration . . . . . . . . . . . . . . . . . . . . . . 125
IP pool range . . . . . . . . . . . . . . . . . . . . . . . . 166
numbers, see MSN
wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Key 1 (quick dial)
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keys
control key . . . . . . . . . . . . . . . . . . . . . . . . .
delete key . . . . . . . . . . . . . . . . . . . . . . . . . .
display keys . . . . . . . . . . . . . . . . . . . . . . . .
98
39
40
40
Version 4, 16.09.2005
LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Language
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
LGPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
License
GPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
LGPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Link2mobile . . . . . . . . . . . . . . . . . . .51, 53, 113
Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
List
answering machine . . . . . . . . . . . . . . 66, 68
call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
e-mail notifications. . . . . . . . . . . . . . . . . . 83
handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
known devices (Bluetooth) . . . . . . . . . 110
missed calls . . . . . . . . . . . . . . . . . . . . . . . . 66
network mailbox . . . . . . . . . . . . . . . . . 68, 99
Local Area Network. . . . . . . . . . . . . . . . . . . 166
Local IP address . . . . . . . . . . . . . . . . . . . . . . 166
Local SIP port . . . . . . . . . . . . . . . . . . . . . . . . 169
Locating a handset . . . . . . . . . . . . . . . . . . . 105
MAC address. . . . . . . . . . . . . . . . . . . . . . . . . 167
checking . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Making calls
accepting a call . . . . . . . . . . . . . . . . . . . . . 52
cost-effective calls . . . . . . . . . . . . . . . . . . 82
external . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
with headset . . . . . . . . . . . . . . . . . . . . . . . 51
Managing the calendar . . . . . . . . . . . . . . . 100
Manual redial . . . . . . . . . . . . . . . . . . . . . . . . . 65
Maximum Receive Unit . . . . . . . . . . . . . . . 167
Maximum Transmission Unit . . . . . . . . . . 167
Mbps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Media Access Control . . . . . . . . . . . . . . . . . 167
Medical equipment . . . . . . . . . . . . . . . . . . . . .9
Menu
end tone . . . . . . . . . . . . . . . . . . . . . . . . . . 122
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Message
deleting (e-mail) . . . . . . . . . . . . . . . . . . . . 85
playing (network mailbox) . . . . . . . . . . . 99
Message key
opening lists . . . . . . . . . . . . . . . . . . . . . . . . 68
Message list
e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
network mailbox . . . . . . . . . . . . . . . . . . . . 99
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
copying the number to the
directory. . . . . . . . . . . . . . . . . . . . . . . 93
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
marking as "new" . . . . . . . . . . . . . . . . . . . 93
new message icon . . . . . . . . . . . . . . . . . . 92
playing back . . . . . . . . . . . . . . . . . . . . . . . . 92
Microphone
179
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnSIX.fm / 24.05.11
Index
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Million bits per second. . . . . . . . . . . . . . . . 167
Missed
anniversary . . . . . . . . . . . . . . . . . . . . . . . . 102
appointment . . . . . . . . . . . . . . . . . . . . . . 102
call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Mobile
activating (Bluetooth) . . . . . . . . . . . . . . 111
connecting (Bluetooth) . . . . . . . . . . . . . 113
MRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
MSN
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
setting up . . . . . . . . . . . . . . . . . . . . . . . . . 126
MTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Music on hold. . . . . . . . . . . . . . . . . . . . 122, 167
Muting
phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Version 4, 16.09.2005
Name
displayed (VoIP) . . . . . . . . . . . . . . . . . . . . 163
displaying caller's name (CNIP) . . . . . . . 53
of a handset . . . . . . . . . . . . . . . . . . . . . . . 107
NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
symmetric . . . . . . . . . . . . . . . . . . . . . . . . . 170
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Network Address Translation . . . . . . . . . . 167
Network mailbox . . . . . . . . . . . . . . . . . . . . . . 97
activating/deactivating . . . . . . . . . . . . . . 97
calling . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99
define for quick dial . . . . . . . . . . . . . . . . . 98
entering number . . . . . . . . . . . . . . . . . . . . 97
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Network MB, see Network mailbox
Network services . . . . . . . . . . . . . . . . . . . . . . 58
No call waiting . . . . . . . . . . . . . . . . . . . . . . . . 61
Notification
incoming e-mail . . . . . . . . . . . . . . . . . . . . 83
Number
copying from directory . . . . . . . . . . . . . . 73
copying to directory . . . . . . . . . . . . . . . . . 73
displaying caller's number (CLIP) . . . . . 53
entering for network mailbox . . . . . . . . 97
entering with directory . . . . . . . . . . . . . . 73
saving in the directory . . . . . . . . . . . . . . . 69
180
Online directory. . . . . . . . . . . . . . . . . . . . . . . 74
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . . 79
Opening the incoming e-mail list . . . . . . . 83
Operating remotely . . . . . . . . . . . . . . . . . . . 95
Operation (setting up the phone) . . . . . . . 10
Order in directory . . . . . . . . . . . . . . . . . . . . . 70
Outbound proxy . . . . . . . . . . . . . . . . . . . . . 167
PABX
connecting base . . . . . . . . . . . . . . . . . . . 133
pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
saving access code . . . . . . . . . . . . . . . . . 133
setting dialling mode . . . . . . . . . . . . . . . 134
Package contents . . . . . . . . . . . . . . . . . . . . . 10
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . 105, 168
Pause
after access code . . . . . . . . . . . . . . . . . . . 134
after line seizure . . . . . . . . . . . . . . . . . . . 134
after recall key . . . . . . . . . . . . . . . . . . . . . 134
PC interface . . . . . . . . . . . . . . . . . . . . . . . . . 150
Personal Identification Number . . . . . . . 168
Phone
protecting against access . . . . . . . . . . . 124
setting up . . . . . . . . . . . . . . . . . . . . . . 10, 123
Picture
caller . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 122
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
renaming. . . . . . . . . . . . . . . . . . . . . . . . . . 123
PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Pin connections . . . . . . . . . . . . . . . . . . . . . . 149
analogue cable . . . . . . . . . . . . . . . . . . . . 149
Playing back
announcement (answering
machine). . . . . . . . . . . . . . . . . . . . . . . 91
message (answering machine) . . . . . . . 92
Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Port forwarding . . . . . . . . . . . . . . . . . . . . . . 168
Port number . . . . . . . . . . . . . . . . . . . . . . . . . 168
Power adapter . . . . . . . . . . . . . . . . . . . . . . . . . .9
Power consumption (base) . . . . . . . . . . . . 148
Power saving adapter plug . . . . . . . . . . . . 100
Preferred DNS server . . . . . . . . . . . . . . . . . 125
Prepare dialling . . . . . . . . . . . . . . . . . . . . . . 168
Private IP address . . . . . . . . . . . . . . . . . . . . 168
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnSIX.fm / 24.05.11
Index
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Proxy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Proxy-Server . . . . . . . . . . . . . . . . . . . . . . . . .
Public IP address . . . . . . . . . . . . . . . . . . . . .
168
168
168
168
Quality of Service . . . . . . . . . . . . . . . . . . . . 168
Questions and answers . . . . . . . . . . . . . . . 142
Quick dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Version 4, 16.09.2005
RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Random Access Memory . . . . . . . . . . . . . . 169
Read Only Memory . . . . . . . . . . . . . . . . . . . 169
Reading the subject (e-mail) . . . . . . . . 84, 85
Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Receive number
display on the handset . . . . . . . . . . . . . . 54
Receiver volume . . . . . . . . . . . . . . . . . . . . . 119
Recording
quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
two-way recording . . . . . . . . . . . . . . . . . . 94
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Reduced energy consumption . . . . . . . . 100
Registering
devices (Bluetooth). . . . . . . . . . . . . . . . . 109
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Registrar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Registration password
VoIP account . . . . . . . . . . . . . . . . . . . . . . . 28
Reminder call . . . . . . . . . . . . . . . . . . . . . . . . . 74
Ring delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Ringback
busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
cancelling (fixed line) . . . . . . . . . . . . . . . . 64
initiating (fixed line) . . . . . . . . . . . . . . . . . 61
no reply . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
setting up when MSN busy . . . . . . . . . . 60
Ringer
changing . . . . . . . . . . . . . . . . . . . . . . . . . . 120
setting volume. . . . . . . . . . . . . . . . . . . . . 120
time control . . . . . . . . . . . . . . . . . . . . . . . 121
ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
connecting base . . . . . . . . . . . . . . . . . . . . 16
Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
RTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
RTP port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Saving (access code). . . . . . . . . . . . . . . . . . 133
Scope of delivery . . . . . . . . . . . . . . . . . . . . . . 10
Screensaver . . . . . . . . . . . . . . . . . . . . . . . . . 118
Searching
for subscribers on Gigaset.net . . . . . . . . 79
in directory . . . . . . . . . . . . . . . . . . . . . . . . . 70
Sender's address (e-mail) . . . . . . . . . . . . . . 85
Sending directory entry to handset . . . . . 71
Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Service (Customer Care) . . . . . . . . . . . . . . 139
Setting
date . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 123
screensaver . . . . . . . . . . . . . . . . . . . . . . . . 118
time . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 123
Setting up
base . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
busy signal . . . . . . . . . . . . . . . . . . . . . . . . . 60
Signal tone, see Advisory tones
Simple Transversal of UDP over NAT . . . 170
SIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
SIP address . . . . . . . . . . . . . . . . . . . . . . . . . . 169
SIP port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
SIP provider . . . . . . . . . . . . . . . . . . . . . . . . . 169
SIP proxy server . . . . . . . . . . . . . . . . . . . . . . 170
Snooze mode . . . . . . . . . . . . . . . . . . . . . . . . 103
Sound, see Ringer
Special functions . . . . . . . . . . . . . . . . . . . . . 134
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 148
Speed dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Static IP address . . . . . . . . . . . . . . . . . . . . . . 170
Status codes (VoIP)
codes table . . . . . . . . . . . . . . . . . . . . . . . . 144
Structure of IP address . . . . . . . . . . . . . . . . 166
STUN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Subnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Subnet mask . . . . . . . . . . . . . . . . . . . . . . . . . 170
defining . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Symmetric NAT . . . . . . . . . . . . . . . . . . . . . . 170
System settings
saving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Telephone jack (fixed line) . . . . . . . . . . . . 149
Three-party conference . . . . . . . . . . . . . . . . 63
Time control . . . . . . . . . . . . . . . . . . . . . . . . . 119
181
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / SaturnSIX.fm / 24.05.11
Index
display backlight . . . . . . . . . . . . . . . . . . . 119
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
TLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Tone dialling . . . . . . . . . . . . . . . . . . . . . . . . . 134
Transmission Control Protocol . . . . . . . . . 170
Transmission rate . . . . . . . . . . . . . . . . . . . . 170
Transport Layer Security . . . . . . . . . . . . . . 170
Transport protocol . . . . . . . . . . . . . . . . . . . 170
Troubleshooting
e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
general. . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
UDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Uniform Resource Identifier . . . . . . . . . . . 170
Universal Resource Locator . . . . . . . . . . . 171
Unknown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Unknown caller . . . . . . . . . . . . . . . . . . . . . . . 54
URI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
URL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
User Datagram Protocol . . . . . . . . . . . . . . 170
User ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
User name . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Using
control key . . . . . . . . . . . . . . . . . . . . . . . . . 39
display keys . . . . . . . . . . . . . . . . . . . . . . . . 40
handsfree mode . . . . . . . . . . . . . . . . . . . . 56
resource directory . . . . . . . . . . . . . . . . . . 122
Version 4, 16.09.2005
VIP (directory entry) . . . . . . . . . . . . . . . . . . . 69
Voice over Internet Protocol . . . . . . . . . . . 171
VoIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
configuring account (first) . . . . . . . . . . . 28
loading provider data . . . . . . . . . . . . . . . 27
show called party's number . . . . . . . . . . 52
starting connection wizard . . . . . . . . . . 23
status codes (table) . . . . . . . . . . . . . . . . 144
VoIP provider . . . . . . . . . . . . . . . . . . . . . . . . 171
downloading data . . . . . . . . . . . . . . . . . . 27
selecting . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
VoIP status messages
status codes table . . . . . . . . . . . . . . . . . . 144
VoIP user data
entering (connection wizard) . . . . . . . . 28
Volume
handsfree . . . . . . . . . . . . . . . . . . . . . . . . . 119
receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
receiver/handsfree . . . . . . . . . . . . . . . . . 119
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
182
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
WAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Warning tone, see Advisory tones
Weather forecasts
in idle display mode . . . . . . . . . . . . . . . . . 88
Wide Area Network . . . . . . . . . . . . . . . . . . . 171
Wire-bound headset
connecting . . . . . . . . . . . . . . . . . . . . . . . . 115
Withholding
phone number display . . . . . . . . . . . . . . 58
phone numbers. . . . . . . . . . . . . . . . . . . . . 58
Writing and editing text . . . . . . . . . . . . . . 149
Gigaset DX800A all in one / USA EN / A31008-xxxxx-xxxx-x-xxxx / Cover_back.fm / 24.05.11
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2011:05:24 12:49:24+02:00
Create Date                     : 2011:05:24 12:11:35Z
Metadata Date                   : 2011:05:24 12:49:24+02:00
Format                          : application/pdf
Title                           : Saturn.book
Creator                         : steffen_in
Document ID                     : uuid:8e9a7796-5bcd-46a5-9b3a-5701032806fb
Instance ID                     : uuid:b9f5bcb1-8f7e-4ce3-9373-84520bdaf267
Page Mode                       : UseOutlines
Page Count                      : 185
Author                          : steffen_in
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TVU-DX800A

Navigation menu