Gigastone H1 Bluetooth Headphone User Manual H1 manual

Gigastone Corp. Bluetooth Headphone H1 manual

15_H1 UserMan

connectedH1H1USER MANUALHeadphone introductionSpecificationsChargingAux In Answer the phone/End the phone/Refuse to answer the phonePairingPower WearingVolume+/Next songVolume-/Last songMICIndicate lightAux inCharging portPower on/offPlay/PauseBluetooth HeadphoneBluetooth Version: If do not use the devise often, pls charge it at least one time monthly. Charging Time: 2-3hoursTalk Time: 15hoursMusic Time: 10hoursStandby Time: 25hoursMaterial: Plastic&MetalProduct Weight: 175gProduct Size: 160*178*80mmAccessory: Charging Cable*13.5mm Audio Cable*1V4.2Support Agreement: A2DP, Hands-freeImpedance: 32ΩSpeaker Unit: 10mmBattery: 500mAh Lithium polymer batteryBluetooth Distance: 10m( No Obstacle) Output Power: 100mWSNR: 90dBPower Supply: DC V5VFor first time using, battery should be in full state. Insert the Micro USB port to earphone’s charging port, connect the other side of USB port to computer’s USB port, then the device is charging. Indicate light: the red light is flashing when charging, the light is off when it is in full battery.Power on: Press the power button over 5-7 seconds, blue light is flashing means the device is power on.Power off: Press the power button 5 seconds, the device is power off after blue light flashes.This device is over-head headphone, pls keep the earmuffs close to your ears, and adjust the ear strap length on your demand.When you use Aux in function, it is no need to make device power on. Insert the audio cable’s 3.5mm port to Aux in port, insert another side of 3.5mm Answer the phone manually: When call is coming, short press the power button to answer phone. End the phone manually: When in call state, short press the power button to end it.Refuse to answer phone manually: When call is coming, double click the power button to refuse it. When it is in standby state, double click the power button to re-dial the last phone No.Pls note that the pairing longest time of Bluetooth headphone is 120 seconds, if the light is off, the Bluetooth state stops, if it still can not pair successfully, pls do the 4 steps once again.When pull out 3.5mm port, the headphone will not switch to Bluetooth mode automatically, it need to turn on the headphone to evoke Bluetooth mode.This product is 1 to 2 design, that is, it can connect two devices with Bluetooth function; if it is set successfully first time, there is no need to set it again, it will connect automatically when the product is power on. 1) Pls make sure that cell phone’s Bluetooth is on, and in Bluetooth mode.2) Press the power button 5-10 seconds, when the indicate light flashes in blue and red alternately, the headphone is in pairing state. 3) About 5 seconds, cell phone can search H1 , click it and cell phone will paired with device automatically. ( Part of cell phones need to input passwords ”0000” to pair.)4) After pairing successfully, it will show connected.5) If you want to pair with second cell phone, pls shut down the Bluetooth of first cell phone, and shut down the headphone, then power on the headphone again, do 1-4 steps, then it can pair successfully.6) At this time, disconnect the second phone’s Bluetooth, and open the first phone’s Bluetooth, the headphone will pair first cell phone automatically.7) All finished, two cellphones can connect automatically.Headphone Mobile phone tabletPCBluetoothLast Phone No. re-dialWhen in music state, press the Play/Pause button to play or pause music.Play/PauseLong press ”+” to increase volume, long press “-” to decrease volume.Pls note that if use Aux in to play music, the operation is useless, pls use player to control volume.VolumeShort press “+” to next song, short press “-” to last song.Pls note that if use Aux in to play music, the operation is useless, pls use player to control volume.Last song and Next songNOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment. This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.

Navigation menu