Gigastone H1 Bluetooth Headphone User Manual H1 manual
Gigastone Corp. Bluetooth Headphone H1 manual
15_H1 UserMan
H1 Bluetooth Headphone USER MANUAL Specifications Aux In Answer the phone/End the phone/Refuse to answer the phone Bluetooth Version: When you use Aux in function, it is no need to make device power on. Insert the audio cable’s 3.5mm port to Aux in port, insert another side of 3.5mm Answer the phone manually: When call is coming, short press the power button to answer phone. End the phone manually: When in call state, short press the power button to end it. Refuse to answer phone manually: When call is coming, double click the power button to refuse it. V4.2 Bluetooth Distance: 10m( No Obstacle) Charging Time: 2-3hours Talk Time: 15hours Support Agreement: A2DP, Hands-free Music Time: Output Power: 100mW Standby Time: 10hours Impedance: 32Ω Material: Plastic&Metal SNR: 90dB Product Weight: 175g Speaker Unit: 10mm Product Size: 160*178*80mm Power Supply: DC V5V Accessory: Charging Cable*1 Battery: 500mAh Lithium polymer battery 25hours 3.5mm Audio Cable*1 Headphone introduction Charging Volume+/Next song Volume-/Last song MIC Indicate light Aux in Charging port Power on/off Play/Pause For first time using, battery should be in full state. Insert the Micro USB port to earphone’s charging port, connect the other side of USB port to computer’s USB port, then the device is charging. Indicate light: the red light is flashing when charging, the light is off when it is in full battery. Headphone Mobile phone PC tablet When it is in standby state, double click the power button to re-dial the last phone No. Pairing This product is 1 to 2 design, that is, it can connect two devices with Bluetooth function; if it is set successfully first time, there is no need to set it again, it will connect automatically when the product is power on. 1) Pls make sure that cell phone’s Bluetooth is on, and in Bluetooth mode. 2) Press the power button 5-10 seconds, when the indicate light flashes in blue and red alternately, the headphone is in pairing state. 3) About 5 seconds, cell phone can search H1 , click it and cell phone will paired with device automatically. ( Part of cell phones need to input passwords ”0000” to pair.) 4) After pairing successfully, it will show connected. Bluetooth Power If do not use the devise often, pls charge it at least one time monthly. Power on: Press the power button over 5-7 seconds, blue light is flashing means the device is power on. Power off: Press the power button 5 seconds, the device is power off after blue light flashes. Wearing This device is over-head headphone, pls keep the earmuffs close to your ears, and adjust the ear strap length on your demand. Last Phone No. re-dial H1 Play/Pause When in music state, press the Play/Pause button to play or pause music. Volume Long press ”+” to increase volume, long press “-” to decrease volume. Pls note that if use Aux in to play music, the operation is useless, pls use player to control volume. connected Pls note that the pairing longest time of Bluetooth headphone is 120 seconds, if the light is off, the Bluetooth state stops, if it still can not pair successfully, pls do the 4 steps once again. 5) If you want to pair with second cell phone, pls shut down the Bluetooth of first cell phone, and shut down the headphone, then power on the headphone again, do 1-4 steps, then it can pair successfully. 6) At this time, disconnect the second phone’s Bluetooth, and open the first phone’s Bluetooth, the headphone will pair first cell phone automatically. 7) All finished, two cellphones can connect automatically. When pull out 3.5mm port, the headphone will not switch to Bluetooth mode automatically, it need to turn on the headphone to evoke Bluetooth mode. Last song and Next song Short press “+” to next song, short press “-” to last song. Pls note that if use Aux in to play music, the operation is useless, pls use player to control volume. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Format : application/pdf Title : H1-manual Metadata Date : 2018:09:17 14:03:09+08:00 Modify Date : 2018:09:17 14:03:09+08:00 Create Date : 2018:09:17 14:03:09+09:00 Creator Tool : Adobe Illustrator CC 2017 (Windows) Thumbnail Width : 256 Thumbnail Height : 68 Thumbnail Format : JPEG Thumbnail Image : (Binary data 9808 bytes, use -b option to extract) Instance ID : uuid:ea755d52-2824-4046-b53b-7ff6b3ae81c7 Document ID : xmp.did:cb224df5-a6f1-174d-82b9-9710821ceb36 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:b0af391d-5518-2d47-a52c-59d1f555d135 Derived From Document ID : xmp.did:b0af391d-5518-2d47-a52c-59d1f555d135 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : saved, saved History Instance ID : xmp.iid:A64F05A442A3E311B455B7A44FA29DDB, xmp.iid:cb224df5-a6f1-174d-82b9-9710821ceb36 History When : 2014:03:04 11:47:35+08:00, 2018:09:17 14:03:05+08:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC 2017 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 487.732713 Max Page Size H : 153.458333 Max Page Size Unit : Millimeters Font Name : ArialMT, MicrosoftJhengHeiRegular, FZLTHK--GBK1-0, FZLTTHK--GBK1-0, FZLTXHK--GBK1-0 Font Family : Arial, 微軟正黑體, 方正兰亭黑_GBK, 方正兰亭特黑_GBK, 方正兰亭纤黑_GBK Font Face : Regular, Regular, Regular, Regular, Regular Font Type : Open Type, Open Type, TrueType, TrueType, TrueType Font Version : Version 5.06, Version 6.02, 1.00, 1.00, 1.00 Font Composite : False, False, False, False, False Font File Name : arial.ttf, msjh.ttf, 兰亭黑 GBK_0.TTF, 兰亭特黑简 GBK_0.TTF, FZLTXHK.TTF Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Producer : Adobe PDF library 15.00 Creator Version : 21.0.0 Page Count : 1 Creator : Adobe Illustrator CC 2017 (Windows)EXIF Metadata provided by EXIF.tools