GlobalSat WorldCom GH-801 POCKETABLE GPS User Manual GS 4303 V1 0 no FM
GlobalSat WorldCom Corporation POCKETABLE GPS GS 4303 V1 0 no FM
USERS MANUAL
GS-4303 Getting You There! User Manual v1.0 Table of Contents 1. Cautions 2. Package Contents 3. Product Features 4. Product Specifications 5. Product Overview 6. Getting Started 6.1 Charging the Battery 6.2 Car Mount Installation 7. Software Instructions 7.1 Main Menu 7.2 Settings 7.2.1 Nav. Setup 7.2.2 GPS Status 7.2.3 Emend T-Scr 7.2.4 Backlight 7.2.5 Language 7.2.6 Volume 7.2.7 Time 7.2.8 System 7.2.9 Skin 7.3 Music Player 7.4 Photo Viewer 7.5 Movie Player 7.6 Bluetooth Car Kit (optional) 8. AVIN 9. Troubleshooting 10. FCC Notices 1. Cautions One should not carry out any operation which could impair safety while driving or cycling. As for the operation of this product in the aircraft, please consult the aviation company first of all. Special care should be taken when an electronics device is engaged during a flight. Never get closer to a place emitting intensive radio waves or radiation which could affect the operation of this product. Never make the navigator fall down or clash with stiff objects to project it against any damage in appearance, battery loose, data lose or other hardware mutilation. Never let this product expose to the humid environment or rain as the water leaked into could disable it to the extent beyond reparation. Never switch on this product in the dusty environment. Over-voltage, power cable strain, bending or squeezing by heavy objects is not allowed to avoid overheating or fire disaster. Never deploy any chemical or detergent to clean up the navigator to prevent erosion of the surface or paintwork. In order to eliminate the risk of electric shock, do not touch the cable power plug with wet hands and do plunge it into the socket completely. Never charge the battery in a neither extreme cold nor hot place, which could damage the battery. Keep this product which is being charged out of the reach of children. Never put it under the direct baking sunshine or place it in a place with high temperature to avoid the problem of over-heat to the battery or this product, which could trigger fault or danger. Put this product on an even workbench instead of blanket, pillow or carpet which could build up the heat to a level so high to bring forth damage. When any sort of fault comes into being, please contract with qualified maintenance personnel for service rather than disassemble it at your own discretion. Keep all the wires in neat order to prevent damage-fostering tangling. Never suppress the LCD screen violently. Never bring it to the open glaring sunshine, which could damage this product. Please wipe the screen surface clean with soft cloth. Never cut off the power directly in the mode of navigation, music, video and image browse, which could lose data. When the system is reading data from or writing date into the memory card, never take out the card directly which could make the information stored in the memory card corrupted or lost or even crash the system. In the process of formatting, upload or download, never disconnect the power supply abruptly. Otherwise, it could lead to a problem of application error. Pay attention to the compatibility of multimedia files and the product can only play back the files in the stipulated formats. All the TV programs, music, movies and images are under the protection of copyright. Unauthorized usage is deemed as an infringement to the laws of copyright. For the sake of data safety, please back up the data on the SD/MMC card into the computer on a regular basis. Do not adjust the volume of speaker to maximum for a long time. Otherwise, it will cause audio distortion. The pictures presented in this manual are only for reference. 2. Package Contents Items GPS Navigator Car Charger Car Mount USB Cable CD ROM Printed User’s Manual (option) AC Charger (option) TMC Antenna (option) Earphone (option) Quantity 3. Product Features 4.3-inch high brightness touch screen Stereo earphone jack 1.5W build-in speaker Build-in high sensitivity GPS receiver Build-in GPS antenna SD/MMC card slot for up to 2GB memory cards Music Player for WMA, WAV, and PCM formats Video Player for ASF and WMV formats Photo Viewer for BMP, JPG, PNG, and GIF formats E-book for TXT format AVIN for car rear camera Bluetooth for car kit function (optional) TMC (optional) Rechargeable lithium battery Full speed USB 1.1 interface LED Indicator for power status 4. Product Specifications Size Weight Environment Parameters 128mm(L) x 83mm W x 20mm H ( ) 210g -10 ~ +60 Storage Temperature ℃ ℃ -20℃ ~ +70℃ Working Humidity 30% ~ 80%RH Storage Humidity 30% ~ 90%RH Working Temperature () System Parameters Main Frequency 266 MHz Processor Samsung S3C2413 ROM Memory 1GB External SD Card Up to 2GB Operation System WinCE 5.0 Core Version Basic Parameters Video Input Type CVBS Display 4.3” TFT LCD Touch Screen / 480x272 Speaker Power 1.5W @ 8ohm Battery Type Build-in 780mAH Rechargeable Lithium Battery Battery Life 2 Hours GPS Hardware Parameters Chipset Mstar Frequency 1.575GHZ C/A CODE 1.023 MHZ chip rate Channel 12 Channels Tracking Sensitivity -161dBm Positioning Sensitivity 10m, 2D RMS 5m, 2D RMS, WAAS enable Speed Rate 0.1m/s Data Update Rate 1HZ Recapture Time 0.1s on Average 3 seconds Cold Start < < 38 seconds < 100 seconds Maximum Altitude 18,000m Maximum Speed 515m/s Acceleration < 4g Build-in Antenna Type Build-in Active Ceramic Antenna Build-in Antenna Gain 27dB Build-in Voltage Antenna 3.3V±5% Build-in Current Antenna Hot Start Warm Start 15mA Bluetooth Parameters (Optional) Maximum Distance 10m Communication Type V1.2 / Class 2 Handfree Type Full Duplex Transmission Chipset CSR BLUECORE3 5. Product Overview Power LED Amber light means the battery is recharging and green light means battery is fully recharged. Menu Button Press the “MENU” button to return to the main menu. Power Button Press and hold the Power Button for three seconds to turn on or turn off the GS-4303. Key Lock Switch Push the switch up or down to lock or unlock the function keys and touch screen operation. Volume Control Wheel Roll the wheel up or down to adjust the volume of the speaker. Earphone Jack Plug in earphone here. AVIN Jack Plug in rear cam here. USB Jack Plug in USB cable here. Microphone Audio input for car kit function. SD/MMC Slot Plug in SD card here. Reset Button Press the Reset Button to restart the device. Stylus Speaker Device audio output. 6. Getting Started 6.1 Charging the Battery There are three methods to charge the GS-4303. Charge by Using the Car Charger Connect the GS-4303 to car cigarette lighter by the car charger provided. Charge by Using the AC Charger Connect the GS-4303 to wall outlet by the AC charger provided. 10 Charge by Using the USB Cable Connect the GS-4303 to PC by the USB cable provided. NOTE: Before using the GS-4303, please charge the battery for more than 5 hours to get the best battery performance. 6.2 Car Mount Installation Attach the GS-4303 to the bracket provided. Attach the bracket to the cradle provided. Clean up the windshield with a dry clean cloth. Place the suction cup on the windshield and flip the lever to fix the cradle on the windshield. Loose the swivel screws to adjust the GS-4303 to the proper position, and then tighten the swivel screws. 7. Software Instructions 7.1 Main Menu After the device is boot up, the Main Menu will show on the screen. 7.2 Settings Click the icon to enter the Settings Menu. 11 7.2.1 Nav. Setup Click on the icon to enter the Navi Setup Menu. Click on the icon to set the path of navigation software. Check the box on the screen to activate navigation auto-run. 7.2.2 GPS Status 12 Click on the icon to enter the GPS Status Menu. Click on the icon to reset the GPS receiver by clicking on the icon Click on the icon to view the NMEA data streams. Click on the icon to view the satellite signal status. Click on the icon to view the longitude, latitude, altitude, and time. 13 7.2.3 Emend T-Scr Click on the icon to start the touch screen calibration. Click on the cross mark on the screen to do the calibration. 7.2.4 Backlight Click on the icon Adjust the backlight brightness level by moving the Brightness Value to enter the Backlight Setting Menu. Bar. Select the backlight power saving criteria by clicking on any of the 14 selections on the screen. If the device is idled longer than the criteria, the backlight brightness level will be changed to minimum brightness level automatically. 7.2.5 Language Click on the icon Select the language you would like to use by moving the bar and to enter the Language Setting Menu. clicking on any of the selections on the screen. 7.2.6 Volume Click on the icon Adjust the volume level by moving the Volume Bar. Set the touch tone volume by clicking on any of the selections on the to enter the Volume Setting Menu. screen. 7.2.7 Time Click on the icon to enter the Time Setting Menu. 15 Adjust the time by clicking on the Up/Down icons on the screen. Select the time zone by clicking on the Right/Left icons below. 7.2.8 System Click on the icon The menu shows the device ID, software version, RAM status, and flash to enter the System Information Menu. memory status. 7.2.9 Skin Click on the icon to enter the Skin Setting Menu. 16 Select the skin style by clicking on one of the selections on the screen. 7.3 Music Player Click on the icon Click the icon to start the Music Player. to select all audio tracks in the directory or double click on one of the audio tracks in the directory to add it to the playlist. Function Icons Description: Click on the icon to add audio tracks to the playlist. 17 Click on the icon to delete selected audio track from the playlist. Click on the icon to delete all audio tracks from the playlist. Click on the icon to switch between the Playlist Edit Console and Music Player Console. Function Icons Description: Click on the icon to pause. Click on the icon to go to next audio track. Click on the icon to go to previous audio track. All tracks in the playlist will be played repeatly if the icon All tracks in the playlist will be played randomly if the icon Click on the icon to mute the speaker. Click on the icon to resume the sound. Click on the icon to adjust volume. showed. showed. 7.4 Photo Viewer Click on the icon to start the Photo Viewer. 18 Click on the icon to select the directory of images. Function Icons Description: Click on the icon to switch to full screen mode. Click on the icon to go to previous image. Click on the icon to go to next image. Click on the icon to start slide show. Click on the icon to zoom out. Click on the icon to zoom in. Click on the icon the rotate the image 900 clockwise. 7.5 Movie Player Click on the icon to start Movie Player. 19 Click the icon to select all video clips in the directory or double click on one of the video clips in the directory to add it to the playlist. Function Icons Description: Click on the icon to add video clips to the playlist. Click on the icon to delete selected clip from the playlist. Click on the icon to delete all clips from the playlist. Click on the icon or double-click the clip to start playing. Click on the icon to switch to full screen mode. 20 Click on the icon to mute the speaker. Click on the icon to resume the sound. Click on the icon to go to next video clip. Click on the icon to go to previous video clip. Click on the icon to adjust volume. 7.6 Bluetooth Car Kit (optional) Click on the icon Click on the icon Click on the icon to enter Bluetooth Menu. to enter the Bluetooth Setting Menu. to change Pincode. 21 Check the Bluetooth ON Box to enable Bluetooth function. Check the Auto Answer Box to enable auto answer function. Click on the icon Connect your phone with the GS-4303. Once the connection is established to start pairing. successfully, click on the icon in the Bluetooth Menu to start Dial Pad. 22 Function Icons Description: Backspace Dial Redail Call Record Click on the icon in the Bluetooth Menu to enter Paired Device Management Menu. Function Icons Description: Connect to selected device Disconnect the existing Bluetooth connection Delete all paired devices The GS-4303 will search and connect automatically to the last paired device only. The following menu will show while a call is incoming. 23 Function Icons Description: Answer a phone call Reject a phone call Adjust volume The following menu will appear while calling. Function Icons Description: Hang up the phone Adjust volume NOTE: The Bluetooth device is only for the hands-free Bluetooth telephone, and does not support the Bluetooth data transmitting and other functions. 8. AVIN The AVIN port is used for car rear camera. Just plug the rear cam cable into the AVIN port of the GS-4303. Once the video signal is detected by the GS-4303, the image will be shown on the display automatically. 24 9. Troubleshooting Problem Solution My GS-4303 cannot get GPS signals. Take your GS-4303 outdoors and away from tall buildings and trees. Remain stationary for several minutes to get the necessary GPS information from satellites. Clean the suction cup and windshield with a clean, dry cloth. Then mount the suction cup as described in section 7.2. 1. Check if the key lock is activated. 2. Check if the battery is charged. Press and hold the Menu Key for three seconds and then calibrate the touch screen. Make sure the Bluetooth on both your phone and the GS-4303 is turned on. Follow the instructions in section 8.6. Check if the USB driver is installed. If it is installed, please uninstall the USB driver and install it again by following the instructions provided. Make sure the cable is fully plugged in the correct jack. Push the reset button to restart the system. Please check page 5 to see the media formats supported by the GS-4303. The suction cup cannot stay on my windshield. I cannot turn on my GS-4303. The touch screen is responding to my taps properly. My phone GS-4303. cannot connect to my My computer cannot access data from my GS-4303. The AVIN function is not working. The system encounters fatal errors and crashed. The images or audio tracks or video clips cannot be played on my GS-4303. 25 10. FCC Notices This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure requirements: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 Create Date : 2008:05:30 13:36:57Z Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:07:10 09:15:21+08:00 Metadata Date : 2008:07:10 09:15:21+08:00 Format : application/pdf Creator : michael.huang Title : Microsoft Word - GS-4303 User manualV1.0_no FM.doc Producer : GPL Ghostscript 8.15 Document ID : uuid:1a44a28c-9fe8-47a7-88cb-f5134a4c8547 Instance ID : uuid:75c2d583-352e-494f-ad96-0bcd3d025f72 Page Count : 26 Author : michael.huangEXIF Metadata provided by EXIF.tools