Gospell Smarthome Electronic 8912W WiFi car rear view camera User Manual 8912W manual

Shenzhen Gospell Smarthome Electronic Co., Ltd. WiFi car rear view camera 8912W manual

user manual

** * The positive and negative pole of the power cable of the emitter box are connected to the positive and negative pole of the rear lamp of the car.Never reverse the positive and negative pole. Otherwise the emitter box and the camera can be damaged and cannot be used.The antenna of the emitter box shall not be near any metal part of the car. Otherwise the emitting distance and the image transmission effect can be influenced.When the camera is fixed, put the lead-wire of the camera through the car trunk.NoticePacking ListLicense Plate Nuts & BoltsIn-Line Wire ConnectorsGrommetCamera EmitterCable TiesWIFI transmitter boxSpecifications* All the specifications are subject to minor change without prior notice. Product Features● The device uses its WIFI module for wireless video signal transmission.● The client can use iOS and Android APP in the intelligent mobile phone to view the real-time camera video, so as to carry out real-time video monitoring for the scenes of the rear view of the car, and it is easy to install and use. ● The client terminal shall support Android 2.2 or above, and iOS shall support Version 4.3 or above. Model:8912W Version 1.0* The pictures are for reference only, please refer to real subjects.Please read this user manual carefully before using this product. Failure to understand operation procedures may result in injury.InstallationInstallati on instructi ons for the came ra:Installati on instructi ons for the emit ter:Operations for Android system client1. Turn on the intelligent mobile device terminal and enter GOOGLE PLAY store. 2. Search "Sight WIFI" software, and download.3. Install the APP software. as the following interface:Red +Black -rear lamp* User could press the RESET button of the emitter to renew the default factory SSID and password. * When the user changes the SSID and password, the user shall forget the network in the "Settings" , and then reconnect the new network. Otherwise login error will remain displayed. NoticeThe specific steps to clear network memory are as follows. connection method to reconnect the new network.and then follow the above WIFI2 31675Wireless Protocol Modulation ModeTransmission Distance With No ObstacleWeightOperation Voltage 12V DCOperation Frequency 2400-2483.5MHzIEEE 802.11b, IEEE 802.11g,IEEE 802.n (1T1R Modes)Operation Current 150mA(MAX)Encryption Mode WPA2802.11b：DSSS (CCK, DQPSK, DBPSK)•802.11g/n：OFDM(BPSK, QPSK, 16QAM, 64QAM) ≥10m60±5gOperation TemperatureDimensions 71 X 35.5 X 12.3MMStorage TemperatureOperation Humidity 20%~90%RHItems GT40682. Click " Wi-Fi ", select your camera, and t the wifi of the intelligent mobile device terminal of the device (Default password: 88888888). As shown below:connecO-10~ C+50O-20~ C+60Operations for iOS Apple system clientInstallation APP software:Settings:WIFICAMERANot in rang e* When set WIFI signal to connect the mobile phone, please close the WIFI signal previously opened.image display time is relate to the CPU memory, software version, working software number of mobile phone.* when the background is black or the image is still, please exit the APP, and check whether the wifi connection is normal. then click again the APP icon to enter into the software interface.* , Notice1. Click the " " icon in the main interface of the intelligent mobile device terminal.Open the APP, and if the connection between the wifi of the tool and the intelligentmobile device terminal is successful, the icon will be highlighted, and the imagestransmitted from the wifi camera tool can be seen in the APP, as shown in the figure.in the real-time monitoring mode, the user can press the icon to reverse the image.Connection WiFi:View the video:WIFICAMERASecured w ith WP2WIFICA ME RA41. Turn on the intelligent mobile device terminal and enter APP Store. 2. Search "Sight WIFI" software, and download.3. Install the APP software. as the following interface:Installation APP software:Connection WiFi:1. Click the " " icon in the main interface of the intelligent mobile device terminal.2. Click " Wi-Fi ", select your camera, and t the wifi of the intelligent mobile device terminal of the device (Default password: 88888888). As shown below:connecWIFI CAMER AView the video:Open the APP, and if the connection between the wifi of the tool and the intelligentmobile device terminal is successful, the icon will be highlighted, and the imagestransmitted from the wifi camera tool can be seen in the APP, as shown in the figure.in the real-time monitoring mode, the user can press the icon to reverse the image.Settings Connecting camera GLOGOPress this icon to enter into the settings menu. You can change the default factory SSID and password of the wifi camera tool, and clicking will show whether the change is successful, and clicking to cancel the new SSID set. * User could press the RESET button of the emitter to renew the default factory SSID and password. * When the user changes the SSID and password, the user shall forget the network in the "Settings" , and then reconnect the new network. Otherwise login error will remain displayed. NoticeThe specific steps to clear network memory are as follows. connection method to reconnect the new network.and then follow the above WIFISettings:Press this icon to enter into the settings menu. You can change the default factory SSID and password of the wifi camera tool, and clicking will show whether the change is successful, and clicking to cancel the new SSID set. Settings Connecting camera * When set WIFI signal to connect the mobile phone, please close the WIFI signal previously opened.image display time is relate to the CPU memory, software version, working software number of mobile phone.* when the background is black click again the APP icon to enter into the software interface.* , or the image is still, please exit the APP, and check whether the wifi connection is normal. thenNotice to the wifi of the tool. The initial SSID of the is WIFICAMERA . Then type in the device " " passwordWIFICA ME RA WP2 PSK Pas sword Sec ur ity Connect Cancel to the wifi of the tool. The initial SSID of the is WIFICAMERA . Then type in the device " " passwordLicense Plate Screws (Optional)WIFI car rear viewNight Vision Range >3mPower Supply 12V DC Video output 0.9 .Vp-p 75Ω ~1 2Consumption Current 150mA MAXImage Sensor 1/4inch CMOSMinimum illumination <5 LuxElectronic Exposure Time 1/60s-12ns(NTSC) sec1/50s-12.5ns(PAL) sec Horizontal View AngleStorage TemperatureOperation Humidity 15%~85%RHOperation TemperatureDimensions 370 X 55 X 35MMWeight 140gItems GL8912640×480 pixels Effective PixelsVideo Format NTSC/PAL80OO-10~ C+50O-20~ C+604. After adjustment, second screw drill, mount and tighten the screws, the camerais installed.3. Move the camera orientation to adjust the display effect.2. Use a screwdriver to the first screw is screwed into the screw hole of the drilled.1. In the proper position of rear license plate drill a screw hole for mounting screw.Video/ playbackPhoto Take a photoRecord a video
FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generatesuses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radio Frequency Exposure StatementThe device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions. The min separation distance is 20cm.

Navigation menu