Gospell Smarthome Electronic 8912W WiFi car rear view camera User Manual 8912W manual

Download:
Mirror Download [FCC.gov]
Document ID	3364401
Application ID	wjAXrOf33MgiIfNgXi0NtA==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	226.16kB (2826952 bits)
Date Submitted	2017-04-20 00:00:00
Date Available	2017-04-20 00:00:00
Creation Date	2014-06-14 14:03:08
Producing Software	Corel PDF Engine Version 15.1.0.588
Document Lastmod	2017-04-13 16:53:55
Document Title	8912W_manual.cdr
Document Creator	CorelDRAW X5
Document Author:	zzpalj

Packing List
Installation
Red +
Installation instructions for the camera:
rear lamp
Black -
Model:8912W
Emitter
Camera
License Plate
Nuts & Bolts
License Plate
Screws (Optional)
In-Line Wire
Connectors
Grommet
Cable Ties
2. Use a screwdriver to the first screw is
screwed into the screw hole of the drilled.
1. In the proper position of rear license plate
drill a screw hole for mounting screw.
When the camera is fixed, put the lead-wire of the camera through the car trunk.
Specifications
Product Features
Notice
WIFI car rear view
● The device uses its WIFI module for wireless video
signal transmission.
● The client can use iOS and Android APP in the
intelligent mobile phone to view the real-time
camera video, so as to carry out real-time video
monitoring for the scenes of the rear view of the
car, and it is easy to install and use.
● The client terminal shall support Android 2.2 or
above, and iOS shall support Version 4.3 or above.
Items
Power Supply
Consumption Current
12V DC
150mA MAX
Video output
Night Vision Range
Image Sensor
0.9~1.2Vp-p 75Ω
>3m
1/4inch CMOS
Effective Pixels
Video Format
640×480 pixels
Operation Temperature
Storage Temperature
Operation Humidity
Dimensions
Weight
Items
Operation Voltage
12V DC
Operation Current
150mA(MAX)
2400-2483.5MHz
Wireless Protocol
IEEE 802.11b, IEEE 802.11g,
IEEE 802.n (1T1R Modes)
Modulation Mode
<5 Lux
80O
-10~+50OC
-20~+60OC
15%~85%RH
370 X 55 X 35MM
140g
GT4068
Operation Frequency
Encryption Mode
NTSC/PAL
1/60s-12ns(NTSC) sec
1/50s-12.5ns(PAL) sec
Minimum illumination
Horizontal View Angle
Version 1.0
WIFI transmitter box
GL8912
Electronic Exposure Time
* The positive and negative pole of the power cable of the emitter box are connected
to the positive and negative pole of the rear lamp of the car.
* Never reverse the positive and negative pole. Otherwise the emitter box and the
camera can be damaged and cannot be used.
* The antenna of the emitter box shall not be near any metal part of the car. Otherwise
the emitting distance and the image transmission effect can be influenced.
3. Move the camera orientation to adjust
the display effect.
4. After adjustment, second screw drill,
mount and tighten the screws, the camera
is installed.
WPA2
802.11b：DSSS (CCK, DQPSK,
DBPSK)•802.11g/n：OFDM
(BPSK, QPSK, 16QAM, 64QAM)
Transmission Distance
With No Obstacle
≥10m
Weight
60±5g
Dimensions
Operation Temperature
71 X 35.5 X 12.3MM
Operations for Android system client
Installation APP software:
Installation instructions for the emitter:
1. Turn on the intelligent mobile device terminal and enter GOOGLE PLAY store.
2. Search "Sight WIFI" software, and download.
3. Install the APP software. as the following interface:
-10~+50OC
Storage Temperature
-20~+60OC
Operation Humidity
20%~90%RH
Please read this user manual carefully before using this product.
Failure to understand operation procedures may result in injury.
* All the specifications are subject to minor change without prior notice.
* The pictures are for reference only, please refer to real subjects.
" icon in the main interface of the intelligent mobile device terminal.
Press this
2. Click " Wi-Fi ", select your camera, and connect the wifi of the intelligent mobile device terminal
to the wifi of the tool. The initial SSID of the device is "WIFICAMERA". Then type in the password
of the device (Default password: 88888888). As shown below:
icon to enter into the settings menu. You can change the default factory
SSID and password of the wifi camera tool, and clicking
is successful, and clicking
will show whether the change
to cancel the new SSID set.
1. Turn on the intelligent mobile device terminal and enter APP Store.
2. Search "Sight WIFI" software, and download.
Connection WiFi:
Security
WP2 PSK
Password
Secured with WP2
Cancel
1. Click the "
Connect
" icon in the main interface of the intelligent mobile device terminal.
2. Click " Wi-Fi ", select your camera, and connect the wifi of the intelligent mobile device terminal
to the wifi of the tool. The initial SSID of the device is "WIFICAMERA". Then type in the password
View the video:
Open the
Notice
* When set WIFI signal to connect the mobile phone, please close the WIFI signal
previously opened.
* image display time is relate to the CPU, memory, software version, working
software number of mobile phone.
* when the background is black or the image is still, please exit the APP, and check
whether the wifi connection is normal. then click again the APP icon to enter into
the software interface.
Installation APP software:
3. Install the APP software. as the following interface:
WIFICAMERA
WIFICAMERA
Operations for iOS Apple system client
Settings:
Connection WiFi:
1. Click the "
Press this
icon to enter into the settings menu. You can change the default factory
SSID and password of the wifi camera tool, and clicking
of the device (Default password: 88888888). As shown below:
APP, and if the connection between the wifi of the tool and the intelligent
mobile device terminal is successful, the
Settings:
is successful, and clicking
icon will be highlighted, and the images
will show whether the change
to cancel the new SSID set.
transmitted from the wifi camera tool can be seen in the APP, as shown in the figure.
in the real-time monitoring mode, the user can press the
icon to reverse the image.
WIFICAMERA
View the video:
Open the
Notice
* User could press the RESET button of the emitter to renew the default factory
SSID and password.
* When the user changes the SSID and password, the user shall forget the network
in the "Settings" , and then reconnect the new network. Otherwise login error will
remain displayed.
Record
a video
Take a
photo
Connecting
camera
Video/Photo
playback
icon will be highlighted, and the images
transmitted from the wifi camera tool can be seen in the APP, as shown in the figure.
in the real-time monitoring mode, the user can press the
icon to reverse the image.
Notice
* User could press the RESET button of the emitter to renew the default factory
SSID and password.
* When the user changes the SSID and password, the user shall forget the network
in the "Settings" , and then reconnect the new network. Otherwise login error will
remain displayed.
Settings
Notice
* When set WIFI signal to connect the mobile phone, please close the WIFI signal
previously opened.
* image display time is relate to the CPU, memory, software version, working
software number of mobile phone.
* when the background is black or the image is still, please exit the APP, and check
whether the wifi connection is normal. then click again the APP icon to enter into
the software interface.
APP, and if the connection between the wifi of the tool and the intelligent
mobile device terminal is successful, the
The specific steps to clear network memory are as follows. and then follow the above WIFI
connection method to reconnect the new network.
The specific steps to clear network memory are as follows. and then follow the above WIFI
connection method to reconnect the new network.
WIFICAMERA
WIFICAMERA
Not in range
Settings
Connecting camera
LOGO
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band.
Ad Hoc function is supported but not able to operate on non-US frequencies.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure conditions.
The min separation distance is 20cm.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Creator                         : zzpalj
Title                           : 8912W_manual.cdr
Create Date                     : 2014:06:14 14:03:08+08:00
Creator Tool                    : CorelDRAW X5
Modify Date                     : 2017:04:13 16:53:55+08:00
Metadata Date                   : 2017:04:13 16:53:55+08:00
Producer                        : Corel PDF Engine Version 15.1.0.588
Document ID                     : uuid:2e8facc1-81b1-49a8-9568-fac3471cf157
Instance ID                     : uuid:7f94c02c-7a36-4147-8ba0-fbe5c993b7de
Page Count                      : 2
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Author                          : zzpalj

EXIF Metadata provided by EXIF.tools