Gospell Smarthome Electronic GD7067 Digital Wireless Camera System User Manual GT4067 GD7067 QSG

Download:
Mirror Download [FCC.gov]
Document ID	2163631
Application ID	wbPh6rZfKZSG2RpyjveE5Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.8kB (872503 bits)
Date Submitted	2014-01-13 00:00:00
Date Available	2014-01-13 00:00:00
Creation Date	2017-10-24 07:53:55
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-24 07:53:55
Document Title	GT4067+GD7067_QSG.cdr
Document Creator	ÿþC(Infix Pro)
Document Author:	oo

Quick Start Guide
Digital Wireless Camera System
8902JN = GL8902( Camera )+GT4067( Transmitter )+GD7067( Receiver )
W ired camera: GL8902 X 1
Wireless transmitter: GT4067 X 1
Wireless receiver: GD7067 X 1
Specifications:
Camera
Packing List:
Model: 8902JN
Image Sensor
1/4" CMOS
Effective Pixels
Video Format
View Angle
80 (NTSC), 82 O(PAL)
656 X 488
NTSC/PAL
<0.5 Lux
1Vp-p±0.2@75Ω
Minimum illumination
Video output
Power Supply
Camera
DC12V±0.5V
65mA±10
IP66
2400~2483.5MHz
4.4 (20dB BW)
QPSK
Consumption Current
Waterproof Capacity
Transmission Frequency
Receiver
Transmitter
Data Bandwidth
Modulation/Demodulation Mode
+18dBm@QPSK
EVM 8%
Transmission Power
Receiving Sensitivity
Unobstructed Effective Range
Power Supply
Consumption Current
-72dB
50M (MAX.)
DC 12~24V
DC 12V@250mA; DC24V@150mA
Dimensions (W X D X H)
Weight
Transmission Frequency
Data Bandwidth
Transmitter
Receiver
Modulation/Demodulation Mode
Prompt:
1, this product is suitable for 12V power car;
2, please find auto electrician to install this product;
3, the wire harness to avoid high temperature and
high pressure location;
Transmission Power
Installation Wired Camera:
Wired camera (GL8902)
2400~2483.5MHz
4.4 (20dB BW)
QPSK
+18dBm @ QPSK
EVM 8%
Receiving Sensitivity
Unobstructed Effective Range
Power Supply
Video output
Dimensions (W X D X H)
Weight
66 X 35 X 12mm
60g
Operation Temperature
Operation Humidity
-10 OC~+50 OC/14 OF~122 OF
15%~85%RH
4, broken wiring must be insulated.
Product Structure:
66 X 35 X 12mm
60g
-72dB
50M (MAX.)
DC 12~24V
1Vp-p±0.2
Wiring diagram and the pairing setting:
Wired camera+Wireless transmitter:
Red line
Camera Lens
Bracket
Video Output
Wireless transmitter (GT4067 )
Connect the vehicle
power supply
Antenna
Rear
lamp
Black line
1. In the proper position of rear license plate
drill a screw hole for mounting screw.
Indicator
Wireless Transmitter
(GT4067)
Wired camera
(GL8902)
2. Use a screwdriver to the first screw is screwed
into the screw hole of the drilled.
Wireless receiver:
Video Input
Display or Monitor
Video input
Wireless Receiver
(GD7067 )
Cigarette lighter
power supply
Pairing
Pairing : To pair the TX box and RX box successfully. please follow the instructions below accordingly.
1. Press and hold the pairing button on the TX box for 3sec. The indicator light will start flashing.
2. Within 30sec of flashing time. Press and hold the pairing button on the RX box for 3sec until the indicator light flashes.
3. Once both TX box and RX box are successfully paired. the indicator lights on TX box and RX box will stop flashing.
Wireless receiver (GD7067 )
Power input
(Connected with a
cigarette lighter)
Antenna
Indicator
Pairing
Video Output
Pair button
3. Move the camera orientation to adjust
the display effect.
4. After adjustment, second screw drill, mount and
tighten the screws, the camera is installed.
Wireless Transmitter
Pair button
Wireless Receiver
FCC Warning Statements:
Changes or modifications not expressly approved by the party responsible for compliance could
oid the use ’s autho it to ope ate the e uip e t.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
RF E posu e Guida ce: This e uip e t co plies ith FCC adiatio e posu e li its set fo th fo
an uncontrolled environment. This equipment should be operated with a minimum distance of
20cm between the radiator and persons. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC
multi-t a s itte p oduct p ocedu es.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Warning                         : Unsupported PNG filter 0

EXIF Metadata provided by EXIF.tools