Gospell Smarthome Electronic GD8203 720P Digital Color Video Baby Monitor with 5 inch HD LCD User Manual 1

Shenzhen Gospell Smarthome Electronic Co., Ltd. 720P Digital Color Video Baby Monitor with 5 inch HD LCD 1

User Manual

EU Environmental ProtectionPlease read this user manual carefully before using this product. Failure to understand operation procedures may result in injury.Version 1.0Waste electrical products shouldnot be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. Model No.: 8203KF720P Digital Color Video Baby Monitor with 5" HD LCD720P Digital Color Video Baby Monitor with 5" HD LCD
IntroductionThank you for choosing our baby monitor. Before using the product please read the instruction carefully in case of damage to the product due to improper operation.Parts in the package01 02product structure123456789101. Photosensitive sensor2. Horn3. Lens4. Indicator LED5. Louver6. Microphone7. SET button8. Temperature sensor9. Antenna10. USB interfaceCamera InstructionPower adapter (for camera, 5V 1A)MonitorOKMENU SLEEPTALKSHOR T CUTPower cable for camera (1m) Power cable for receiver (3m)OKMEN U SLEEPTALKSHO RT CUT11 1213141516 1718 1920212223242511. Antenna12. Menu button/Return13. On/off button14. Sleep button15. Shift up/Brightness+16. Confirmation button/ Zoom button17. Shift right/Volume+ 18. Shift down/Brightness-19. Shift left/Volume-20. Dialogue key22. Microphone23. Shortcut button24. SET button25. USB interface21. Status indicatorPower adapter (for monitor, 5V 2A)
Turn on/off the display (press for 2s)Sleep button. Press this button, the screen is off, press it again, the screen turns on. (this button does not influence automatic sleep setup. Automatic sleep still functions normally.)In real-time viewing, by pressing this button, the camera can be controlled to turn left. In menu interface, by pressing this button, the menu cursor shifts left. In shortcut interface, press this button to turn down volume.In real-time viewing, by pressing this button, the image size is doubled. In menu interface, pressing this button to confirm.In real-time viewing, by pressing this button, the camera can be controlled to turn upward. In menu interface, by pressing this button, the menu cursor shifts upward. In shortcut interface, by pressing this button, brightness of the display is increasedSLEEPOKMENUPress the button to jump to Menu, press the button again, exit from Menu. The button also has the function of returning to previous step.Function introduction of buttons for monitorStatus indicator LED: 03 04In real-time viewing, by pressing this button, jump to talkback function; releasing the button, talkback function is off. The voice from camera end cannot be heard till the button is released. TALKSHORT CUTShortcut button. By pressing this button, shortcut interface pops up, volume and brightness of the monitor can be adjusted.++In real-time viewing, by pressing this button, the camera can be controlled to turn right. In menu interface, by pressing this button, the menu cursor shifts right. In shortcut interface, press this button to turn up volume.In real-time viewing, by pressing this button, the camera can be controlled to turn downward. In menu interface, by pressing this button, the menu cursor shifts downward. In shortcut interface, by pressing this button, brightness of the display is decreasedFunction introduction of buttons for cameraIndicator LED. When green LED flashes slowly, startup is successful, or the camera is disconnected with the monitor. When green LED flashes quickly, the camera and monitor are being paired. When green LED is on constantly, the camera and monitor are paired successfully.SET button. Short press it for 1s, jump to pairing mode; long press for 5s, factory reset.The first green LED lights constantly: indicates that the camera and monitor are connected successfully The first green LED flashes slowly (once per second): indicates that it is starting, without connecting the camera The first green LED flashes quickly (3 times per second): indicates code matching
From the second to fifth green LEDs flash from low to high: Quantity of flashing LED indicates sound volume received From the second to fifth green LED s flash simultaneously (once per second): indicates that alert signal is received. The sixth LED constantly gives off red light: indicates that the lithium battery is being charged; (it always be shown whether it is on or off) The sixth LED is off: indicates that the battery is charged fully27Explanation for iconsSignal strength between the monitor and cameraNo signal connection between the monitor and cameraCradlesong enabledSleep setup of monitor enabledShow current room temperatureShow current battery level. When battery level is too low, the icon will become and flash Sound alarm enabledTemperature alarm enabled!Icon of status barCamera is not added or camera and monitor are disconnectedSound alarm promptTemperature alarm promptIcon for message pushEquipment installation1.Position the camera(s)Find a location for the camera that gives you the best view of your baby in his or her crib.Place the camera on a flat surface,like a dresser.IMPORTANT:NEVER place the camera or cords of any kindinside the crib.NEVER place the camera or cords within reachof the baby.05 06
07 081. Installation of camera1. Charge the camera of 20cm between the radiator and your body.The camera should be installed and operated with a minimum distance The monitor shall be installed and used such that parts of the user's body 8 inches(20cm) or more. other than the hands are maintained at a distance of approximatelyPlug an end of the accompanying charging cable into the USB port in the back of camera.Plug the other end into the accompanying power adapter. Then plug the adapter into a socket.After the camera is powered on it will start up automatically. (the camera automatically swings up-down ward or from side to side, the indicator LED on camera base lights and the green LED flashes slowly. Now, the camera starts up successfully).
09 102. Installation of monitor1. Power on monitor (the monitor has a built-in lithium battery, if it has enough power, please implement the second step operation directly.Plug an end of the charging cable into the USB charging port in the side of monitor. Plug the other end of the charging cable into the power adapter. Then plug the adapter into a power socket.2. Starting up of monitorPress on the monitor for 2s27OKMENU SLEEPTALKSHORT CUTNow, real-time video will be shown on monitorNote: The equipment had been paired before leaving factory. If no video is shown on the monitor after above operation, please complete equipment pairing operation again. For detailed procedure please see p10, Camera Pairing.Function setting of the monitor You can define functions for your baby monitor to meet your demands better. Sound and temperature alarm will inform you automatically. In the chapter every setup that can be defined by you will be explained one by one.27OKMENU SLEEPTALKSHORT CUTMonitor access menuMENUCAMERAS SOUNDDETECTIONTEMPERATURE AL ARMSETTINGSSLEEP MODELULLABIES27MENUIn real-time viewing, press the button on the monitor to return to menu bar. In non-real-time case, press button for multiple times till the screen jumps to menu bar.
11 12Setting of camera (camera pairing and deletion)1. Add camera1. Select the " " icon, then press the "OK" button of the monitor.2. Select the " " icon, then press the "OK" button of the monitor.+3. Now, the equipment will prompt "camera is no paired"-+27Camera is No paired.274. Press the yellow SET button behind camera base for 1s, green indicator LED of the camera will flash quickly, now, the equipment jumps to pairing mode. Then, press the "OK" button of the monitor.Start pairing......275. Now, the camera and monitor start pairing mode.Pairing is OK.276. When the monitor prompts "pairing is OK", it indicates that equipment is paired successfully.7. The monitor will jump to monitoring screen, and green indicator LED of the camera will light constantly.27OKMENU SLEEPTALKSHO RT CUT
13 142. Delete camera1. Select the " " icon, then press the "OK" button of the monitor.2. Select the " " icon, then press the "OK" button of the monitor.-+27-3. Now, the equipment will prompt "camera is paired. Can be deleted". Press the "OK" button of the monitor.Camera is paired. Can be deleted.27Deleting is OK.274. When the monitor prompts "Deleting is OK", it indicates that camera has been deleted successfully.27OKMENU SLEEPTALKSHO RT CUT5. The monitor will return to monitoring screen and show no camera added. Green indicator LED of the camera will turn to flash.Set alarming range of sound sensitivity. The function will identify loudness of baby's cry, when it exceeds set range, the monitor will send off alarm sound.OFFSetting of sound alarm1. Select the " " icon, then press the "OK" button of the monitor.2. Select " 、 、 " icon as demanded, press the "OK" button of the monitor to complete setting of sound alarm.Press button on the monitor for 2 times, it will return to real-time screen. (if is selected, when "OK" button of the monitor is pressed, the monitor will not push sound alarm any more) DefaultLow HighMENUDefaultLow OFFHigh27
15 16Setting of temperature alarmSet as Celsius degree: select icon, press the "OK" button of the monitor.Temperature switch: Select press the OK button of the monitor, indicating temperature alarm function enabled.After setting is OK, press the button of the monitor for 2 times, it returns to real-time screen.°cONMENUWhen baby's room is too hot or too cold, temperature alarm will push notice to your monitor.1. Select the " " icon, then press the "OK" button of the monitor.ONOFF°c°F27°FSet as Celsius degree" select icon, press the OK button of the monitor.Temperature switch: Select , press the OK button of the monitor, indicating that temperature alarm function enabled successfully.After setting is OK, press the button of the monitor for 2 times to return to real-time screen.ONMENUCelsius degree settingFahrenheit degree Note: The alarm sound will last for 1 minute. Notice for sound alarm can be closed by pressing any button on the monitor, and it will not receive the notice within 3 minutes after closing.Note: Default normal temperature is 15 - 30℃ (59℉ - 86℉). When the temperature of baby's room is beyond the range, the monitor will receive the sound of temperature alarm. The sound will last for 1 minute. Notice for temperature alarm can be closed by pressing any button of the monitor, and it will not receive the notice again within 3 minutes after closing.ONOFF°c°F27Cradlesong The baby monitor has five cradlesongs to help you with coaxing the baby to sleep.MENU1. Select the " " icon, then press the "OK" button of the monitor to jump to setup page.2. Select the music you want to play, press the OK button of the monitor and the camera will play the cradlesong selected by you. After setting is OK, pressing the OK button of the monitor again, the cradlesong pauses. When selecting "ALL", all cradlesongs will be played in loop. After setting is OK, press button of the monitor and it will return to real-time screen.
27Note: There will be a " "icon below the option of current song. If the cradlesong pauses, the icon will become " ".Sleep modeYou can set your monitor as automatic sleep mode. The setup will automatically jump to sleep mode according to the time set by you.1. Select " "icon and press the "OK" button of the monitor, it will jump to setup page.2. Select the time of sleep as demanded. Press OK button of the monitor. Now, the monitor will automatically jump to sleep mode. After setting is OK, press button of the monitor two times to return to real-time screen. OFF5mins 30mins 60mins27MENUNote: There are 3 options including 5 minutes, 30 minutes and 60 minutes for sleep time. You can make a choice according to your own demand. By selecting OFF and pressing "OK" button of the monitor, sleep mode will be closed.SetupThe setup includes time setting, factory reset and viewing of hardware version. 271. Time setting3. You can press the button of the monitor to select the item to be adjusted; press the button of the monitor to edit the selected item. After setting is OK, press button of the monitor 3 times, then it will return to real-time screen.2. Select " " icon and press the OK button of the monitor to jump to setup page.Calibrate the time of monitorO S D:DATE:TIME:ON2016-12-518:25:23271. Select " "icon and press the "OK" button of the monitor, to jump to setup page.MENU17 18
19 20272.Factory resetFormat all setting of the monitor and delete camera.YES NO27Restore to default settings?Now, the equipment will prompt you of "Restore to default settings?" Select "YES", press the "OK" button of the monitor. The equipment begins to implement factory reset.1.Select " "icon and press the "OK" button of the monitor, it will jump to setup page.2. Select " "icon and press the OK button of the monitor, it will jump to setup page.27Start restoring......274. After factory reset is OK, the monitor will automatically jump to monitoring screen and show the prompt icon of no camera added. Meanwhile, the green indicator LED of camera will flash.3.Information on version27Rx:SN:Tx:SN:272. Select " " icon and press the OK button of the monitor to jump to setup page.3. Now, the receiver will show version related information. After viewing, press button of the monitor 3 times to return to real-time screen。Check receiver version information1, Select " " icon, press "OK" button of the monitor to jump to setup page.MENU
21 22All the specifications are subject to minor change without prior notice.SpecificationsDC 5V/2A2.4GHz FHSS164x98x28 (mm) 5" LCDWireless transmission WayDimensions(W*D*H)Weight0~75%RH0℃~50℃Operation temperatureOperating humidity 262gNumber of pixels 720*3RGB(H)x1280(V)Power supply-20℃~60℃Storage temperature1/4" CMOS-10℃~50℃5mImage sensor Video resolutionRotation angleDimensions(W*D*H) Weight Operation temperature84x84x105mm1280 x 720P/25fps242gPan: 340° Tilt:90°Night visual rangeOperation humidity 15~85%-20℃~60℃Storage temperatureCameraReceiverPower supply 5V 1ANOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.Hereby, we declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.Notice: Observe the national local regulations in the location where the device Is to be used. This device may be restricted for use in some or all member states of the European Union (EU)This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference(2) This device must accept any interference received, including interference that may cause undesired operation.EU Environmental ProvisionsE-waste cannot be mixed with household garbage; corresponding local government sector or recycling stations shall be responsible for circular process.CEandFCC Certification Information

Navigation menu