Gospell Smarthome Electronic GD8203 720P Digital Color Video Baby Monitor with 5 inch HD LCD User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3867963
Application ID	/ptbhiHzCCkCBI6mz4/1rA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	131.7kB (1646279 bits)
Date Submitted	2018-05-29 00:00:00
Date Available	2018-05-29 00:00:00
Creation Date	2018-04-11 15:05:10
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2018-05-25 11:42:17
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	admin

720P Digital Color Video Baby
Monitor with 5" HD LCD
EU Environmental Protection
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authority or retailer for
recycling advice.
Model No.: 8203KF
Version 1.0
Please read this user manual carefully before using this product. Failure to
understand operation procedures may result in injury.
Introduction
product structure
Thank you for choosing our baby monitor. Before using the
product please read the instruction carefully in case of damage
to the product due to improper operation.
Parts in the package
1. Photosensitive sensor
2. Horn
3. Lens
4. Indicator LED
5. Louver
6. Microphone
MENU
SLEEP
10
7. SET button
8. Temperature sensor
9. Antenna
10. USB interface
OK
SHORT CUT
TALK
11
Camera
Monitor
12
Instruction
13
14
24
MENU
15
SLEEP
16
17
OK
18
Power adapter (for camera, 5V 1A)
Power adapter (for monitor, 5V 2A)
25
SHORT CUT
TALK
19
20
21
23
21. Status indicator
12. Menu button/Return
16. Confirmation button/
Zoom button
17. Shift right/Volume+
13. On/off button
18. Shift down/Brightness-
23. Shortcut button
14. Sleep button
15. Shift up/Brightness+
19. Shift left/Volume20. Dialogue key
24. SET button
25. USB interface
11. Antenna
Power cable for camera (1m)
01
Power cable for receiver (3m)
22
22. Microphone
02
In real-time viewing, by pressing this button, the camera
can be controlled to turn upward.
In menu interface, by pressing this button, the menu
cursor shifts upward.
In shortcut interface, by pressing this button, brightness
of the display is increased
Function introduction of buttons for camera
Indicator LED. When green LED flashes slowly,
startup is successful, or the camera is disconnected
with the monitor. When green LED flashes quickly,
the camera and monitor are being paired. When
green LED is on constantly, the camera and monitor
are paired successfully.
In real-time viewing, by pressing this button, the camera
can be controlled to turn downward.
In menu interface, by pressing this button, the menu
cursor shifts downward.
In shortcut interface, by pressing this button, brightness
of the display is decreased
SET button. Short press it for 1s, jump to pairing
mode; long press for 5s, factory reset.
Function introduction of buttons for monitor
OK
Turn on/off the display (press for 2s)
In real-time viewing, by pressing this button, the image
size is doubled.
In menu interface, pressing this button to confirm.
Shortcut button. By pressing this button, shortcut
SHORT CUT
MENU
SLEEP
Press the button to jump to Menu, press the button again,
exit from Menu. The button also has the function of
returning to previous step.
Sleep button. Press this button, the screen is off, press it
again, the screen turns on. (this button does not
influence automatic sleep setup. Automatic sleep still
functions normally.)
In real-time viewing, by pressing this button, the camera
can be controlled to turn left.
In menu interface, by pressing this button, the menu
cursor shifts left.
In shortcut interface, press this button to turn down
volume.
In real-time viewing, by pressing this button, the camera
can be controlled to turn right.
In menu interface, by pressing this button, the menu
cursor shifts right.
In shortcut interface, press this button to turn up volume.
03
interface
pops up, volume and brightness of
the monitor can be adjusted.
TALK
In real-time viewing, by pressing this button, jump to
talkback function; releasing the button, talkback function
is off. The voice from camera end cannot be heard till the
button is released.
Status indicator LED:
The first green LED lights constantly: indicates that
the camera and monitor are connected successfully
The first green LED flashes slowly (once per second):
indicates that it is starting, without connecting the camera
The first green LED flashes quickly (3 times per
second): indicates code matching
04
From the second to fifth green LEDs flash from low to
high: Quantity of flashing LED indicates sound volume
received
From the second to fifth green LED s flash
simultaneously (once per second): indicates that alert
signal is received.
The sixth LED constantly gives off red light: indicates
that the lithium battery is being charged; (it always be
shown whether it is on or off)
The sixth LED is off: indicates that the battery is
charged fully
Equipment installation
1.Position the camera(s)
Find a location for the camera
that gives you the best view of
your baby in his or her crib.
Explanation for icons
Icon of status bar
No signal connection between the monitor and camera
Signal strength between the monitor and camera
Cradlesong enabled
Sleep setup of monitor enabled
27
Place the camera on a flat surface,like a dresser.
Show current room temperature
Show current battery level. When battery level is too low,
the icon will become
and flash
Sound alarm enabled
Temperature alarm enabled
IMPORTANT:NEVER place the camera or cords of any kind
inside the crib.NEVER place the camera or cords within reach
of the baby.
Icon for message push
Camera is not added or camera and monitor are disconnected
Sound alarm prompt
Temperature alarm prompt
05
06
1. Installation of camera
1. Charge the camera
Plug an end of the accompanying
charging cable into the USB port in
the back of camera.
The monitor shall be installed and used such that parts of the user's body
other than the hands are maintained at a distance of approximately
8 inches(20cm) or more.
The camera should be installed and operated with a minimum distance
Plug the other end into the accompanying
power adapter. Then plug the adapter into
a socket.
of 20cm between the radiator and your body.
After the camera is powered on it will start up automatically. (the
camera automatically swings up-down ward or from side to side,
the indicator LED on camera base lights and the green LED
flashes slowly. Now, the camera starts up successfully).
07
08
2. Installation of monitor
Function setting of the monitor
1. Power on monitor (the monitor has a built-in lithium
battery, if it has enough power, please implement the second
step operation directly.
You can define functions for your baby monitor to meet your
demands better. Sound and temperature alarm will inform you
automatically. In the chapter every setup that can be defined by
you will be explained one by one.
Plug an end of the charging cable into the USB
charging port in the side of monitor. Plug the
other end of the charging cable into the power
adapter. Then plug the adapter into a power
socket.
Monitor access menu
In real-time viewing, press the
button on the monitor to return
MENU
to menu bar. In non-real-time case, press
button for multiple
MENU
times till the screen jumps to menu bar.
27
MENU
2. Starting up of monitor
Press
on the monitor for 2s
SLEEP
OK
27
SHORT CUT
MENU
TALK
SLEEP
OK
27
SHORT CUT
TALK
Now, real-time video will be shown on monitor
Note: The equipment had been paired before leaving
factor y. If no video is shown on the monitor after above
operation, please complete equipment pairing operation
again. For detailed procedure please see p10, Camera
Pairing.
09
CAMERAS
SOUND
DETECTION
TEMPERATURE
ALARM
LULLABIES
SLEEP MODE
SETTINGS
10
Setting of camera
(camera pairing and deletion)
5. Now, the camera and monitor start pairing mode.
27
1. Add camera
1. Select the "
monitor.
2. Select the "
monitor.
" icon, then press the "OK" button of the
" icon, then press the "OK" button of the
Start pairing......
27
6. When the monitor prompts "pairing is OK", it indicates that
equipment is paired successfully.
27
3. Now, the equipment will prompt "camera is no paired"
Pairing is OK.
27
7. The monitor will jump to monitoring screen, and green indicator
LED of the camera will light constantly.
27
Camera is No paired.
MENU
SLEEP
OK
4. Press the yellow SET button behind camera base for
1s, green indicator LED of the camera will flash quickly,
now, the equipment jumps to pairing mode. Then, press
the "OK" button of the monitor.
11
SHORT CUT
TALK
12
2. Delete camera
1. Select the "
2. Select the "
" icon, then press the "OK" button of the monitor.
5. The monitor will return to monitoring screen and show no
camera added. Green indicator LED of the camera will turn to
flash.
27
" icon, then press the "OK" button of the monitor.
MENU
SLEEP
27
OK
SHORT CUT
TALK
Setting of sound alarm
3. Now, the equipment will prompt "camera is paired. Can be
deleted". Press the "OK" button of the monitor.
27
Set alarming range of sound sensitivity. The function
will identify loudness of baby's cry, when it exceeds
set range, the monitor will send off alarm sound.
1. Select the "
" icon, then press the "OK" button of the
monitor.
2. Select " Low 、 、High " icon as demanded, press the
Default
"OK" button of the monitor to complete setting of sound
Camera is paired. Can be deleted.
alarm.Press
button on the monitor for 2 times, it will
MENU
return to real-time screen. (if
4. When the monitor prompts "Deleting is OK", it indicates that
camera has been deleted successfully.
OFF
is selected, when "OK"
button of the monitor is pressed, the monitor will not push
sound alarm any more)
27
27
Low
Default
High
OFF
Deleting is OK.
13
14
Note: The alarm sound will last for 1 minute. Notice for
sound alarm can be closed by pressing any button on the
monitor, and it will not receive the notice within 3 minutes
after closing.
Setting of temperature alarm
When baby's room is too hot or too cold, temperature
alarm will push notice to your monitor.
1. Select the "
" icon, then press the "OK" button of the
monitor.
Celsius degree setting
Set as Celsius degree: select °c icon, press the "OK"
button of the monitor.
Temperature switch: Select ON press the OK button of
the monitor, indicating temperature alarm function
enabled.
After setting is OK, press the MENU button of the monitor for
2 times, it returns to real-time screen.
27
27
°c
°F
ON
OFF
Note: Default normal temperature is 15 - 30℃ (59℉ - 86℉).
When the temperature of baby's room is beyond the range,
the monitor will receive the sound of temperature alarm. The
sound will last for 1 minute. Notice for temperature alarm
can be closed by pressing any button of the monitor, and it
will not receive the notice again within 3 minutes after
closing.
Cradlesong
The baby monitor has five cradlesongs to help you
with coaxing the baby to sleep.
1. Select the "
" icon, then press the "OK" button of the
monitor to jump to setup page.
°c
°F
ON
OFF
Fahrenheit degree
°F icon, press the OK
Set as Celsius degree" select
button of the monitor.
Temperature switch: Select ON , press the OK button of
the monitor, indicating that temperature alarm function
enabled successfully.
After setting is OK, press the MENU button of the monitor for
2 times to return to real-time screen.
15
2. Select the music you want to play, press the OK button
of the monitor and the camera will play the cradlesong
selected by you. After setting is OK, pressing the OK
button of the monitor again, the cradlesong pauses.
When selecting "ALL", all cradlesongs will be played in
loop. After setting is OK, press MENU button of the monitor
and it will return to real-time screen.
16
Setup
27
The setup includes time setting, factory reset and
viewing of hardware version.
1. Time setting
Calibrate the time of monitor
1. Select "
Note: There will be a " "icon below the option of current song.
If the cradlesong pauses, the icon will become " ".
"icon and press the "OK" button of the
monitor, to jump to setup page.
2. Select "
" icon and press the OK button of the
monitor to jump to setup page.
Sleep mode
27
You can set your monitor as automatic sleep mode.
The setup will automatically jump to sleep mode
according to the time set by you.
1. Select "
"icon and press the "OK" button of the
monitor, it will jump to setup page.
2. Select the time of sleep as demanded. Press OK button
of the monitor. Now, the monitor will automatically jump to
sleep mode. After setting is OK, press
MENU
button of the
monitor two times to return to real-time screen.
27
3. You can press the
button of the monitor to select
the item to be adjusted; press the
button of the
monitor to edit the selected item. After setting is OK,
press
button of the monitor 3 times, then it will return
MENU
to real-time screen.
27
5mins
30mins
60mins
OFF
O S D: ON
DATE: 2016-12-5
TIME: 18:25:23
Note: There are 3 options including 5 minutes, 30 minutes and 60
minutes for sleep time. You can make a choice according to your
own demand. By selecting OFF and pressing "OK" button of the
monitor, sleep mode will be closed.
17
18
2.Factory reset
Format all setting of the monitor and delete camera.
3.Information on version
Check receiver version information
1.Select "
"icon and press the "OK" button of the monitor, it will
jump to setup page.
2. Select "
"icon and press the OK button of the monitor, it will
jump to setup page.
1, Select "
" icon, press "OK" button of the monitor to jump to
setup page.
2. Select "
" icon and press the OK button of the monitor to
jump to setup page.
27
27
Now, the equipment will prompt you of "Restore to default
settings?" Select "YES", press the "OK" button of the monitor.
The equipment begins to implement factory reset.
27
27
3. Now, the receiver will show version related information. After
viewing, press MENU button of the monitor 3 times to return to
real-time screen。
Restore to default settings?
27
Start restoring......
YES
NO
Rx:
SN:
Tx:
SN:
4. After factory reset is OK, the monitor will automatically jump to
monitoring screen and show the prompt icon of no camera added.
Meanwhile, the green indicator LED of camera will flash.
27
19
20
Receiver
Camera
Specifications
Image sensor
Video resolution
Rotation angle
Night visual range
Power supply
Operation temperature
Storage temperature
Operation humidity
Dimensions(W*D*H)
Weight
LCD
Number of pixels
Wireless transmission Way
Power supply
Operation temperature
Storage temperature
Operating humidity
Dimensions(W*D*H)
Weight
CE
and
FCC Certification Information
1/4" CMOS
1280 x 720P/25fps
Pan: 340° Tilt:90°
5m
5V 1A
-10℃~50℃
-20℃~60℃
15~85%
84x84x105mm
242g
5"
720*3RGB(H)x1280(V)
2.4GHz FHSS
DC 5V/2A
0℃~50℃
-20℃~60℃
0~75%RH
164x98x28 (mm)
262g
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired
operation.
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm
between the device and the human body. To maintain compliance with RF exposure requirement, use
product that maintain a 20cm distance between the device and human body.
Hereby, we declares that this device is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
Notice: Observe the national local regulations in the location where the device Is to be used.
This device may be restricted for use in some or all member states of the European Union (EU)
EU Environmental Provisions
E-waste cannot be mixed with household
garbage; corresponding local government
sector or recycling stations shall be
responsible for circular process.
All the specifications are subject to minor change without prior notice.
21
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : admin
Create Date                     : 2018:04:11 15:05:10+08:00
Modify Date                     : 2018:05:25 11:42:17+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : admin
Title                           : 未命名 -1
Creator Tool                    : CorelDRAW X6
Metadata Date                   : 2018:05:25 11:42:17+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Document ID                     : uuid:ffbc637c-5416-4f8e-a099-bc765987b956
Instance ID                     : uuid:cba37e04-022c-406c-8433-bb1d5bd977b2
Page Count                      : 12
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools