Gospell Smarthome Electronic GD8723 WIFI REARVIEW CAMERA User Manual GD8723 manual 640x480

Shenzhen Gospell Smarthome Electronic Co., Ltd. WIFI REARVIEW CAMERA GD8723 manual 640x480

Contents

Users Manual Part Two

14
13
4. Touch “Forget” to remove network records. Then, reconnect to the network using the
previous WiFi connection methods.
Operations for Android system client
Touch “Settings” on the home screen of your device.
Ulife tools
ULIFE TEAM / Media a nd v id eo
(2)
OPEN
To install software for your smart mobile device that runs an Android system:
1. Turn on interlligent mobile device and enter Google Play store.
Search for the software “Ulife tools”, and download.
2. Touch Install. The software can be installed on your device.
3. After the installation is complete, the icon of the software is
displayed on the home screen, as shown in the following figure.
Installation APP software
WiFi Connection
Touch “WLAN” and select your camera (The initial SSID is “ ”)
and connect the WiFi with default password ( ).
WIFICAMERA
88888888
Note
handle to select WIFI channels. then reconnect the WIFI.
: When the WIFI connection problem, the user can turn on / off the power switch of
16
15
Device Operation
Note: If the WiFi interruption occurs when you view an image, or the picture viewing
stops. In this case, exit the application and check whether the WiFi connection is proper.
Open the APP, if the wifi connection is successful,
the video could be seen in the APP as shown below.
Settings
Touch this icon to display the settings menu.
You can set a new SSID or password for your WiFi network.
Change the WiFi channel.
Take
a photo
Record
a video
18
17
1.Touch “Settings” on the home screen of your device.
After you change the SSID or password, touch Settings on the home screen to forget this
network and reconnect your device to the network. Otherwise, a message indicating a login
error is always displayed. To forget this network:
Important Notes:
Touch the "Browsing files" in can view the picture or
video.Enter the pictures can choose to send the file.
the settings and
2.Touch to search for the WiFi name.
3.Then touch the modified WiFi camera.
WLAN
20
19
4.Touch “Forget” to remove network records. Then, reconnect to the network using the
previous WiFi connection methods.
Note
the batteries must be replaced.
If you forget the SSID and password of the smart mobile device, you can press Reset
on the product for 5 seconds to enable factory defaults.
: Normally the yellow light is on. When the red light is on, the battery voltage is low and
* Actual transmission range of wireless monitoring may vary according to the weather, location,
interference or building construction.
* All specifications are subject to minor change without prior notice.
< 400mA
260 x 50 x 40 (mm) (Excluding Flexible Tube)
174g
20~85%RH
-20 ~55 /14 F~122 F
O O O O
C C
camera
>1 hours
Minimum Illumination
Horizontal Viewing Angle
Consumption Current (Max.)
Handle Weight
Imaging Sensor
Effective Pixels
Power Supply
Operating Temperature
Operating Humidity (Max.)
Waterproof Capacity
Transmission Frequency
Model No.
Tube Diameter
Working Time
AA x (1.5V x 4)4 batteries
CMOS
2400~2483.5MHz
IP67 (for lens/tube only)
Transmit Power
<14dBm
Receiver Sensitivity
11b:-90,11g/n:-72 dBm
Transmission Rate
1--150M bps
Frequency Stability
±20 PPm
Unobstructed
Effective Range
≥10 m
Working Voltage
DC 4V--6.5V
NTSC
PAL
0 Lux (LED ON)
GD8723
Specifications
Dimensions (W D H)x x
Modulation /
Demodulation Mode
802.11g/n：OFDM (BPSK, QPSK, 16QAM, 64QAM)
802.11b：DSSS (CCK, DQPSK, DBPSK)
45o
9mm
640 x 480
640 480x
Picture/Video Pixels
640 480 x
Frame Rate
20 frame/second
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The graphics included in this user manual are subject to minor change without notice.
FCC information
21
uncontrolled environment .
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

Navigation menu