Gospell Smarthome Electronic T5886HAA HD WiFi Camera User Manual T5886 Manual 3 5

Shenzhen Gospell Smarthome Electronic Co., Ltd. HD WiFi Camera T5886 Manual 3 5

15_T5886HAA UserMan

AntennaThermo sensitive inductionMicro SD card slotSET keyIndicator light Power adapter portAppearanceMicrophoneI Light sensor Camera LensNote: There is no sensor which the product is without the temperature control induction.-14--15- Troubleshooting2. Red indicator remains, network connection is failed. a) Ensure that the password of Wi-Fi is correct. b) Ensure that the network connects to Internet freely. c) Ensure that the camera is in range of Wi-Fi hotspot.5.Push message: when movement is detected, alarm message can be sent to server and pushed to your phone.6.Remote monitoring: after the camera is connected to Internet successfully, app can view the monitor via Internet, anytime, anywhere.7.Temperature alarm: In case that the temperature detected by the device is higher than the set value, audible alarm will be activated on cell phone (once every 2 minutes). Note: There is no function which the product is without the temperature control induction 3. Green indicator flashes, connection to server failed. a) Ensure that Wi-Fi signal is strong enough and bandwidth is enough for connection. Move near to Wi-Fi hotspot or increase the bandwidth. b) Ensure that camera is not under interferon of other 2.4GHz signal. Tips1.Suggest using qualified micro-SD card to avoid incompatibility. Format micro-SD card before using.2.Movement detection: when movement is detected within the scope of camera, the camera will record video and take photos automatically. Videos and photos will be saved in micro-SD card.1. Wi-Fi cannot be connected a) Ensure that the antenna of camera is fixed well. b) Ensure that camera is in range of router. Keep the distance less than 40fts between router and indoor camera, less than 65fts for outdoor camera. c) Ensure that SSID and password of Wi-Fi contains no special characters. Modify the SSID and password of Wi-Fi with only English characters, no special characters. d) Ensure that SSID and password are no longer than 16 characters e) Ensure that SSID is broadcasted. f ) Ensure that the DHCP is enabled on router. g) Ensure that Wi-Fi encryption method is WPA2-PSK/ WPA-PSK or AES. h) Ensure that Wi-Fi signal is 2.4GHz. i ) Ensure that there is no MAC filter on router or add MAC address to router whitelist j ) We suggest rebooting the router, and the "security settings, encryption method" of WiFi password should never choose "auto-select". k ) Reset the camera to set up connection again. Press and hold SET key for 5 seconds. 9.When this machine has a crash fault or other abnormal conditions influencing the usage, it is recommended to cut out the power and restart; or press SET key for 10 seconds, which can restore factory settings, and then please reconnect the router.8.Only support the special characters in English mode, such as: " @, #, &, *, ~, ｛, ｝, -, =, +, /, ?, (, )", Dont support the special characters, such as:"%", "\", "<>". 3.Share your camera to friends: Share QR code of the device with your friends.4.The main account to delete the camera, this time friends to share Will be deleted together. (You have to re-add the camera to use it again) The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Hereby, we declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.Notice: Observe the national local regulations in the location where the device Is to be used. This device may be restricted for use in some or all member states of the European Union (EU)This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.The operated frequency is 2.4G~2.4835G with B/G/N20/N40.The Max output power on 802.11b is 16.96dBm.The Max output power on 802.11g is 14.98dBm.The Max output power on 802.11n-20 is 15.12dBm.The Max output power on 802.11n-40 is 14.67dBm-16-EU Environmental ProvisionsE-waste cannot be mixed with household garbage; corresponding local government sector or recycling stations shall be responsible for circular process.-13- Function Features Packing List Camera Power adapter Quick GuideUSB cable The picture is only for reference and the real object shall prevailScrews 24/7 live video streamingHD provides excellent video qualitySmart motion detection and notificationAdvanced video recording on micro-SD card (Maximally support the cyclic recording of 64GB micro SD card.) Motorized Pan/TiltNight vision (5m visibility)Two-way voice transmitQuick & easy to set up Model: T5886HAAQuick Start GuideBefore using the product, please read the guide carefully to avoidany damages to the product in virtue of faulty operation or misuse.HD WiFi Camera109FCC/CE Certification InformationNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 11 Product Specifications※No additional notice will be made in case of any minor change. Our company reserves the right of final interpretation.6 78-1- -2--3- -4- -5- -6- -7- -8--12--10--9--17-1. 2.4G wireless router is required. 2. support Android 4.4 and above, iOS 8.0 and above3. Download and install the APP:A. Open the App Store , search “GOSCOM” and install. B. Open the Google Play Store , search “GOSCOM” and install.4. Here is an operation example of Android APP, and it can serve as a reference for the iOS APP. 5. power-on Camera and there will be prompt sound indicating power on succeed Preparation prior to InstallationCamera2InstallationPower Adapter Wall SocketTIP: For user ID registration, please use an effective email address, (example XXXX@qq.com), in order to retrieve the password.(2)(1)(3)Step 1: Tap the “GOSCOM” APP icon to open it (figure 1);Step 2: Use email address for user ID registration (figure 2-3);Step 3: After registration, enter the email address and then password to log in (figure 2) Register/LoginQuick RegisterEnter addressEnter pa sswordEnter pa ssword againRegisterGet c odeplease enter verification code sent toyour email(case sensitive)Pass word fo rmat: 8 -16 cha racte rs in len gth, co ntain a t leasttwo kinds among numbers,capital letters and lowercaselet tersI have raed this Agreem ent and agre e to theterms an d conditi ons User agre ementNo Se rvice 11:5 0EmailEnter pass wor dLoginReg ist er Remember passwordForget passwordNo Service 11:5 0Scan QR Code to AddDevice ListAdd deviceExper ience Cen terNo Service 11:5 0Add friends shareAdd by network cableAdd devicesca n the QR co de to a ddAdd b y WiFiNo Se rvice 11:5 0WiFi settingConfirmplease confirm the SSID and password arecorrect,and SSID matches the WiFi of deviceResetPASS WORDNo Service 11:5 0Camera does not support 5G Wi -Fi;i f this is n ot the network you want,click to changeWiFi settingConfirmplease confirm the SSID and password arecorrect,and SSID matches the WiFi of deviceResetPASS WORDNo Service 11:5 0Camera does not support 5G Wi -Fi;i f this is n ot the network you want,click to change1.Click “Add Camera” → “scan the QR code to add”(figure 5) (figure 4) Click 2.Configure WIFI, enter WiFi name and password, and “Confirm” after that. (figure 6)P.S:Device does not support 5G Wi-Fi network; if this is not your desired network, tap to toggle.(figure 7)Click (4) (5)(6) (7)Scan QR Code AlbumNo Service 11:5 0Add Dev iceNextDevice Name：CameraSca nID：No Se rvice 11:5 0Press and hold the SET key for 1 second and then you will hear Star t Configurtion ModeAlbumNo Service 11:5 04.Click the QR code icon (Figure 9) , switch to the QR code scanning mode, and scan the ID QR code●QR Code on the camera sticker (Figure 10) ;●Or choose the QR code picture from the album for ID scanning(Figure 11) 5.When the APP Switch to the precaution page before scanning, please read the prompts carefully and click "Next step"(Figure 12)When the mobile phone shows a QR code interface, please align the QR code to the camera, with a distance of about 10 ~ 20cm(Figure 13); if scanning succeeds, you will hear “Beep”twice.3.Please press the “SET” key for 1 second, and then you will hear a “Beep” sound(figure 8)(8)(9) (10) (11)10-20cmI Have Heard ItPut t his QR co de at 10- 20cm fr om the cam era, an d when yo u hear a "b eep" pro mpt sou nd, cli ck “I hav e hear d it”ConfirmNo pr ompt so undScan QR CodeNo Se rvice 11:5 0Scan QR CodeI have heard itDid y ou hear a “ beep” so und?Did n ot hear a ny soun d?No Service 11:5 0Device ListAdd deviceExperience CenterLiv ing Roo mNo Service 11:5 0Living Room2017/04/21 13:0031°CNo Se rvice 11:5 0SpeakSound Snapshot6.After scan the QR Code, and when you hear "Beep" twice Click “I Have Heard It”(Figure 14), and now the camera is connecting to the router WiFi. When you see that the indicator on the device turns from blinking green to be steady on, it indicates that the device is connected and will automatically skip to the device list. (Figure 15)Click the device to enter the real-time monitoring interface.(Figure 16)(12) (13)(16)(15)(14)Add by WIFIDevice ListAdd deviceExperience CenterNo Service 11:5 0Add friends shareAdd by network cableAdd devicesca n the QR co de to a ddAdd b y WiFiNo Se rvice 11:5 0WiFi settingConfirmplease confirm the SSID and password arecorrect,and SSID matches the WiFi of deviceResetPASS WORDNo Service 11:5 0Camera does not support 5G Wi -Fi;i f this is n ot the network you want,click to change1.Click “Add Camera” → “Add by WIFI” Figure 18)→ Configure WIFI, enter WiFi name and password, and click “Confirm” after that.(Figure 19)P.S:Device does not support 5G Wi-Fi network; if this is not your desired network, Click to toggle(Figure 17) Click (2.Please press and hold the “SET” key for 1 second, and then you will hear a “Beep” sound(Figure 20) 3.Click the QR code icon (Figure 21) , switch to the QR code scanning mode, and scan the ID QR code●QR Code on the camera sticker (Figure 22) ;●Or choose the QR code picture from the album for ID scanning(Figure 23) (17) (18) (19)(20)Add by Wi FiIt will take about 1-2 minutes to WiFi network,please waitcon necti ng fail de in ove r 2 min ute sSte p 1: Connec tingSte p 3: Connec t succe ededSte p 2: Bindin gNo Service 11:5 0Device ListAdd deviceExper ience Cen terLiving RoomNo Service 11:5 0Living Room2017/04/21 13:0031°CNo Se rvice 11:5 0SpeakSound SnapshotScan QR Code AlbumNo Service 11:5 0Add DeviceNextDevice Name：CameraSca nID：No Service 11:5 0Press and hold the SET key for 1 second and then you will hear Star t Configurtion ModeAlbumNo Service 11:5 04.indicates that the camera is connecting to the router.(Figure 24) When you see that the indicator on the device turns from blinking green to be steady on, it indicates that the device is connected and will automatically skip to the device list. (Figure 25) Click the device to enter the real-time monitoring interface.(Figure 26) After you click “Confirm”, when you will hear “Beep”twice, (21) (22) (23)(24) (25) (26)Living Room2017/04/21 13:0031°CNo Se rvice 11:5 0SpeakSound SnapshotHD3795683241View Monitoring and OperateAfter the device is connected, you can view real-time monitoring, and take a picture, record a video, speak, set up and make other operations on your mobile phone.1. Voice button: Click to close/disclose the voice2. Talkback button: press and hold this button to talk with the camera.3. Capture button: click to fast capture (save in the settings directory Album Book option).4. Playback button: Click to enter the playback page, you can view the camera SD card video file.5. Record button: Click to start recording, click the button again (stored in the set the directory of the album option).6. PTZ button: Click this button, APP pop-up PTZ control interface for Head level \ vertical angle to adjust (Figure 28).7. Sharpness button: Click to adjust the Resolution pixel for real-time video monitoring (HD/SD)8.Thermometer: Real-time temperature detection9.Set button: Click this button to set the camera-related functions.Living Room2017/04/21 13:0031°CNo Se rvice 11:5 0HDRoc ker(27) (28)Software Upgrade1. Click “Settings” icon → Click “Device Information” (Figure 30) Click “System Firmware” (Figure 31) Click “Update Now” (Figure 32)(It can only be upgraded if there is a small red spot on the top right corner of the application firmware)(Figure 29)→ → 4Features2017/04/21 13:0031°CLiving RoomNo Se rvice 11:5 0SpeakSound SnapshotNo Se rvice 11:5 0Can Upd ate t o 00.0 0.00.011.Optimize APP network pairing pro cedur e2.Optimize…3.Optimize…Upd ate Now Another TimeUpdateNo Se rvice 11:5 0SettingSta tus indicatorRot ate video 180 degreesNight visionSha re with f riend sWiF i set tingDevice informationDelete deviceAlbumCamera time c heckNo Se rvice 11:5 0(29) (30)(32) (31)-11-Device Unbinding1. “Settings” icon → “Delete Device”APP will automatically switch to camera list, delete the camera you want to Unbundled it from the APPClick (Figure 33) Click (Figure 34)SettingSta tus indicatorRot ate video 180 degreesNight visionShare with friendsWiF i set tingDevice informationDelet e deviceAlbumCamera time c heckNo Se rvice 11:5 0Living Room2017/04/21 13:0031°CNo Se rvice 11:5 0SpeakSound SnapshotGenerate a QR code for sharing(can share this QR Code to multi- users)1. Click”setting” icon(Figure 35) → Click "share with friends"(Figure 36)→ you can have the QR code(Figure 37)Add Friends to ShareSettingSta tus indicatorRot ate video 180 degreesNight visionShare with friendsWiF i settingDevice informationDelet e deviceAlbumCamera time c heckNo Se rvice 11:5 0share with friendsSteps to share with friendsStep 1:Open“Add Camera”on the mobile phone ofa friendStep 2:Select the fourth way to add,and scan QRcodeNo Se rvice 11:5 0Living Room2017/04/21 13:0031°CNo Se rvice 11:5 0SpeakSound Snapshot(33) (34)(35) (36) (37)Add friends shareAdd by network cableAdd devicesca n the QR co de to a ddAdd b y WiFiNo Se rvice 11:5 0Add DeviceSca nID：No Service 11:5 0Scan the QR code for sharing with friendsDevice ListAdd deviceExperience CenterLiving RoomNo Service 11:5 0Indicates that power failure or network not connected.Red indicator remainsRed indicator flashesIndicates that camera is connecting to network.Green indicator flashesIndicates the router connected successfully (no Internet).Green indicator remainsIndicates the camera is connected to server and working well.Camera Indicator Instruction5(38) (39) (40)If other users want to add the camera, Click "Add Camera" → sele ct "Add Friends to Shar e" mode(Figure 38)→ Click the QR code icon (Figure 39) , switch to the QR code scanning mode→ scan the QR code shared by friends→ Enter the Device List(Figure 40)

Navigation menu