Gospell Smarthome Electronic T5886HAA HD WiFi Camera User Manual T5886 Manual 3 5

Shenzhen Gospell Smarthome Electronic Co., Ltd. HD WiFi Camera T5886 Manual 3 5

15_T5886HAA UserMan

Download: Gospell Smarthome Electronic T5886HAA HD WiFi Camera User Manual T5886 Manual 3 5
Mirror Download [FCC.gov]Gospell Smarthome Electronic T5886HAA HD WiFi Camera User Manual T5886 Manual 3 5
Document ID3659652
Application IDUQSqnat9+PhTYQs9m0t70A==
Document Description15_T5886HAA UserMan
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize267.79kB (3347424 bits)
Date Submitted2017-11-30 00:00:00
Date Available2017-11-30 00:00:00
Creation Date2017-09-30 15:13:40
Producing SoftwareCorel PDF Engine Version 15.1.0.588
Document Lastmod2017-11-24 11:15:15
Document TitleT5886_Manual(3.5) 模板.cdr
Document CreatorCorelDRAW X5
Document Author: zzpalj

Appearance
Installation
Preparation prior to Installation
HD WiFi Camera
Light sensor
Camera Lens
Scan QR Code to Add
Register/Login
1. 2.4G wireless router is required.
2. support Android 4.4 and above, iOS 8.0 and above
3. Download and install the APP:
A. Open the App Store , search “GOSCOM” and install.
B. Open the Google Play Store , search “GOSCOM” and install.
4. Here is an operation example of Android APP, and
it can serve as a reference for the iOS APP.
5. power-on Camera and there will be prompt sound
indicating power on succeed
Step 1: Tap the “GOSCOM” APP icon to open it (figure 1);
Step 2: Use email address for user ID registration (figure 2-3);
Step 3: After registration, enter the email address and then
password to log in (figure 2)
1.Click “Add Camera” (figure 4) → Click “scan the QR code to add”
(figure 5)
11:50
No Service
3.Please press the “SET” key for 1 second, and then
you will hear a “Beep” sound(figure 8)
10-20cm
No Service
No prompt sound
11:50
No Service
11:50
No Service
scan the QR code to add
Quick Register
Add by WiFi
Add by network cable
Add device
Get code
Enter address
Add friends share
Experience Center
please enter verification code sent to
your email(case sensitive)
Email
11:50
No Service
(4)
11:50
Scan QR Code
Add Device
Enter password
Password format: 8-16 characters in length, contain at least
two kinds among numbers,capital letters and lowercase
letters
Wall Socket
Login
Register
Forget password
No Service
Album
11:50
Album
(5)
2.Configure WIFI, enter WiFi name and password, and Click
“Confirm” after that. (figure 6)P.S:Device does not support 5G
Wi-Fi network; if this is not your desired network, tap to toggle.
(figure 7)
11:50
No Service
WiFi setting
Press and hold the SET key for 1 second and then
you will hear Star t Configur tion Mode
Press and hold the SET key for 1 second and then
you will hear Star t Configur tion Mode
11:50
No Service
WiFi setting
ID: Scan
WiFi setting
Next
(12)
(13)
scan the QR code to add
6. After scan the QR Code, and when you hear "Beep" twice Click “I
Have Heard It” (Figure 14) , and now the camera is connecting to the
router WiFi. When you see that the indicator on the device turns from
blinking green to be steady on, it indicates that the device is connected
and will automatically skip to the device list. (Figure 15)
Click the device to enter the real-time monitoring interface. (Figure 16)
11:50
No Service
11:50
No Service
I have raed this Agreement and agree to the
terms and conditions User agreement
Antenna
11:50
Album
Device Name:Camera
Enter password again
Remember password
No Service
Album
Camera does not support 5G Wi-Fi;if this is not the
network you want,click to change
4.Click the QR code icon
(Figure 9) , switch to the QR code
scanning mode, and scan the ID QR code
●QR Code on the camera sticker (Figure 10) ;
●Or choose the QR code picture from the album for ID scanning
(Figure 11)
No Service
Enter password
Register
Scan QR Code
I Have Heard It
11:50
No Service
11:50
No Service
Confirm
(8)
(3)
11:50
Add device
Device List
(2)
11:50
Add Device
1.Click “Add Camera” (Figure 17) → Click “Add by WIFI” (
Figure 18)→ Configure WIFI, enter WiFi name and password,
and click “Confirm” after that.(Figure 19)P.S:Device does not
support 5G Wi-Fi network; if this is not your desired network,
Click to toggle
Add device
Put this QR code at 10-20cm from the
camera, and when you hear a "beep"
prompt sound, click “I have heard it”
(1)
Power Adapter
No Service
Add by WIFI
Scan QR Code
11:50
No Service
Device List
Microphone
Camera
11:50
No Service
11:50
No Service
Scan QR Code
ID: Scan
Device List
please confirm the SSID and password arecorrect,
and SSID matches the WiFi of device
Add by network cable
Confirm
Add device
Add friends share
Experience Center
(17)
(18)
(19)
2.Please press and hold the “SET” key for 1 second, and then
you will hear a “Beep” sound(Figure 20)
11:50
Living Room
2017/04/21 13:00
Device Name:Camera
Camera does not support 5G Wi-Fi;if this is not the
network you want,click to change
No Service
(21)
Reset
PASSWORD
Add by WiFi
(22)
(23)
4. After you click “Confirm”, when you will hear “Beep”twice,
indicates that the camera is connecting to the router.(Figure 24)
When you see that the indicator on the device turns from blinking
green to be steady on, it indicates that the device is connected
and will automatically skip to the device list. (Figure 25)
Click the device to enter the real-time monitoring interface.
(Figure 26)
No Service
11:50
11:50
No Service
Add by WiFi
No Service
Device List
11:50
Living Room
2017/04/21 13:00
It will take about 1-2 minutes to WiFi network,
please wait
Camera does not support 5G Wi-Fi;if this is not the
network you want,click to change
Next
Thermo sensitive induction
Note: There is no sensor which the
product is without the temperature
control induction.
31°C
31°C
(9)
Reset
Micro SD card slot
SET key
Quick Start Guide
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
View Monitoring and Operate
After the device is connected, you can view real-time
monitoring, and take a picture, record a video, speak, set
up and make other operations on your mobile phone.
No Service
11:50
No Service
Living Room
2017/04/21 13:00
11:50
Living Room
2017/04/21 13:00
Device Unbinding
Features
1. Click “Settings” icon (Figure 33) → Click “Delete Device” (Figure 34)
APP will automatically switch to camera list, delete the camera you
want to Unbundled it from the APP
Software Upgrade
1. Click “Settings” icon (Figure 29) → Click “Device Information”
(Figure 30)→ Click “System Firmware” (Figure 31)→ Click “Update
Now” (Figure 32)(It can only be upgraded if there is a small red spot
on the top right corner of the application firmware)
11:50
No Service
No Service
11:50
11:50
No Service
Living Room
11:50
No Service
Living Room
Camera time check
Rotate video 180 degrees
31°C
Sound
Share with friends
Snapshot
Add by network cable
(33)
Add friends share
(34)
Delete device
Experience Center
WiFi setting
(27)
(28)
1. Voice button: Click to close/disclose the voice
2. Talkback button: press and hold this button to talk with the
camera.
3. Capture button: click to fast capture (save in the settings
directory Album Book option).
4. Playback button: Click to enter the playback page, you can
view the camera SD card video file.
5. Record button: Click to start recording, click the button again
(stored in the set the directory of the album option).
6. PTZ button: Click this button, APP pop-up PTZ control interface
for Head level \ vertical angle to adjust (Figure 28).
7. Sharpness button: Click to adjust the Resolution pixel for
real-time video monitoring (HD/SD)
8.Thermometer: Real-time temperature detection
9.Set button: Click this button to set the camera-related functions.
Sound
Device information
Snapshot
Speak
(29)
No Service
11:50
Delete device
No Service
(30)
(38)
Add Friends to Share
Generate a QR code for sharing(can share this QR Code to
multi- users)
1. Click”setting” icon(Figure 35) → Click "share with friends"
(Figure 36)→ you can have the QR code(Figure 37)
11:50
11:50
No Service
Living Room
No Service
11:50
share with friends
Setting
2017/04/21 13:00
(40)
※ No additional notice will be made in case of any
minor change. Our company reserves the right of
final interpretation.
Camera
Camera Indicator Instruction
USB cable
Power
adapter
Red indicator
remains
Indicates that power failure or network not
connected.
Red indicator
flashes
Indicates that camera is connecting to
network.
Green
indicator
flashes
Green
indicator
remains
Indicates the router connected
successfully (no Internet).
Album
Status indicator
Update
Rotate video 180 degrees
Can Update to 00.00.00.01
Night vision
1.Optimize APP network pairing
procedure
2.Optimize…
3.Optimize…
Update Now
(39)
31°C
Share with friends
Another Time
Steps to share with friends
Camera time check
Sound
Snapshot
WiFi setting
Step 1:Open“Add Camera”on the mobile phone of
a friend
Device information
Step 2:Select the fourth way to add,and scan QR
code
Indicates the camera is connected to server
and working well.
Speak
(32)
-9-
(31)
-10-
(35)
Delete device
-11-
(36)
Screws
Quick Guide
The picture is only for reference and the real object shall prevail
11:50
No Service
Packing List
Add device
Camera time check
(37)
-12-
Add device
-13-
-14-
Sound
Snapshot
Speak
Did not hear any sound?
Experience Center
(14)
(15)
Function Features
Step 2: Binding
Step 3: Connect succeeded
I have heard it
(16)
3.Click the QR code icon
(Figure 21) , switch to the QR code
scanning mode, and scan the ID QR code
●QR Code on the camera sticker (Figure 22) ;
●Or choose the QR code picture from the album for ID scanning
(Figure 23)
-6-
ID: Scan
Add by WiFi
Device information
Speak
Snapshot
Speak
Rocker
scan the QR code to add
WiFi setting
Night vision
Sound
Step 1: Connecting
(20)
Did you hear a “beep” sound?
-5-
Status indicator
Device List
Scan the QR code for sharing with friends
31°C
5.When the APP Switch to the precaution page before scanning,
please read the prompts carefully and click "Next step"(Figure 12)
When the mobile phone shows a QR code interface, please align
the QR code to the camera, with a distance of about 10 ~ 20cm
(Figure 13); if scanning succeeds, you will hear “Beep”twice.
24/7 live video streaming
HD provides excellent video quality
Smart motion detection and notification
Advanced video recording on micro-SD card (Maximally
support the cyclic recording of 64GB micro SD card.)
Motorized Pan/Tilt
Night vision (5m visibility)
Two-way voice transmit
Quick & easy to set up
Night vision
Share with friends
Product Specifications
Rotate video 180 degrees
Setting
Album
HD
31°C
(11)
(7)
Status indicator
31°C
HD
Confirm
11:50
No Service
Add Device
Add device
Album
11:50
please confirm the SSID and password arecorrect,
and SSID matches the WiFi of device
(10)
-4-
If other users want to add the camera, Click "Add Camera" →
select "Add Friends to Share" mode(Figure 38)→ Click the QR
code icon
(Figure 39) , switch to the QR code scanning
mode→ scan the QR code shared by friends→ Enter the Device
List(Figure 40)
No Service
Setting
2017/04/21 13:00
11:50
No Service
Living Room
2017/04/21 13:00
Confirm
-3-
-2-
PASSWORD
please confirm the SSID and password arecorrect,
and SSID matches the WiFi of device
(6)
-1-
Reset
PASSWORD
TIP: For user ID registration, please use an effective email
address, (example XXXX@qq.com), in order to retrieve the
password.
Indicator light
Power adapter port
Model: T5886HAA
Living Room
Living Room
-7-
10
Tips
1.Suggest using qualified micro-SD card to avoid
incompatibility. Format micro-SD card before using.
2.Movement detection: when movement is detected
within the scope of camera, the camera will record video
and take photos automatically. Videos and photos will
be saved in micro-SD card.
3.Share your camera to friends: Share QR code of the
device with your friends.
4.The main account to delete the camera, this time friends
to share Will be deleted together.
(You have to re-add the camera to use it again)
5.Push message: when movement is detected, alarm
message can be sent to server and pushed to your
phone.
6.Remote monitoring: after the camera is connected to
Internet successfully, app can view the monitor via
Internet, anytime, anywhere.
7.Temperature alarm: In case that the temperature
detected by the device is higher than the set value,
audible alarm will be activated on cell phone (once
every 2 minutes).
Note: There is no function which the product is without
the temperature control induction
8.Only support the special characters in English mode,
such as: " @, #, &, *, ~, {, }, -, =, +, /, ?, (, )",
Dont support the special characters, such as:"%", "\",
"<>".
9.When this machine has a crash fault or other abnormal
conditions influencing the usage, it is recommended to
cut out the power and restart; or press SET key for 10
seconds, which can restore factory settings, and then
please reconnect the router.
-15-
Troubleshooting
1. Wi-Fi cannot be connected
a) Ensure that the antenna of camera is fixed well.
b) Ensure that camera is in range of router. Keep the distance
less than 40fts between router and indoor camera, less than
65fts for outdoor camera.
c) Ensure that SSID and password of Wi-Fi contains no special
characters. Modify the SSID and password of Wi-Fi with only
English characters, no special characters.
d) Ensure that SSID and password are no longer than 16 characters
e) Ensure that SSID is broadcasted.
f ) Ensure that the DHCP is enabled on router.
g) Ensure that Wi-Fi encryption method is WPA2-PSK/
WPA-PSK or AES.
h) Ensure that Wi-Fi signal is 2.4GHz.
i ) Ensure that there is no MAC filter on router or add MAC address
to router whitelist
j ) We suggest rebooting the router, and the "security settings,
encryption method" of WiFi password should never choose
"auto-select".
k ) Reset the camera to set up connection again. Press and hold
SET key for 5 seconds.
2. Red indicator remains, network connection is failed.
a) Ensure that the password of Wi-Fi is correct.
b) Ensure that the network connects to Internet freely.
c) Ensure that the camera is in range of Wi-Fi hotspot.
3. Green indicator flashes, connection to server failed.
a) Ensure that Wi-Fi signal is strong enough and
bandwidth is enough for connection. Move near to Wi-Fi hotspot
or increase the bandwidth.
b) Ensure that camera is not under interferon of other 2.4GHz signal.
11
Add device
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
-16-
Snapshot
Experience Center
(24)
(25)
(26)
-8-
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The Maximum Permissible Exposure (MPE) level has been calculated based
on a distance of d=20 cm between the device and the human body. To maintain
compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body. Hereby, we declares that this
device is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
Notice: Observe the national local regulations in the location where the device I
s to be used. This device may be restricted for use in some or all member states
of the European Union (EU)
The operated frequency is 2.4G~2.4835G with B/G/N20/N40.
The Max output power on 802.11b is 16.96dBm.
The Max output power on 802.11g is 14.98dBm.
The Max output power on 802.11n-20 is 15.12dBm.
The Max output power on 802.11n-40 is 14.67dBm
EU Environmental Provisions
FCC/CE Certification Information
Sound
Speak
connecting failde in over 2 minutes
E-waste cannot be mixed with household
garbage; corresponding local government
sector or recycling stations shall be
responsible for circular process.
-17-

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : zzpalj
Create Date                     : 2017:09:30 15:13:40+08:00
Modify Date                     : 2017:11:24 11:15:15+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : zzpalj
Title                           : T5886_Manual(3.5) 模板.cdr
Creator Tool                    : CorelDRAW X5
Metadata Date                   : 2017:11:24 11:15:15+08:00
Producer                        : Corel PDF Engine Version 15.1.0.588
Document ID                     : uuid:4ee53d9e-4968-416d-8a1b-3e6ea718810a
Instance ID                     : uuid:cbb5cc60-0209-402e-9a54-2e9a17959062
Page Count                      : 1
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TW5T5886HAA

Navigation menu