Gospell Smarthome Electronic T5886HCA HD WiFi Camera User Manual

Shenzhen Gospell Smarthome Electronic Co., Ltd. HD WiFi Camera

User Manual

Folding Schematic Front side Model: T5886HCABefore using the product, please read the guide carefully to avoidany damages to the product in virtue of faulty operation or misuse.HD WiFi CameraQuick Start Guide80x110mm105g铜版纸双面四色印刷640x110mm汪敏 2017.06.02电子档1:1中文说明书新版本变更时间 变更前1.1变更后说明：工艺：风琴折，封面在外其他：16PT5886HCA中性B2017.06.02 技术规格部份有更改内存改为64GB
AntennaThermo sensitive inductionMicro SD card slotSET keyIndicator light Power adapter port-1- Model: T5886HCAQuick Start GuideBefore using the product, please read the guide carefully to avoidany damages to the product in virtue of faulty operation or misuse.AppearanceMicrophoneI HD WiFi CameraLight sensor Camera Lens-2--3--4--5--8- Installation II ※Take the operation of Android client-end as example, and refer to Android client-end for IOS client-end.(Fig. 2) 1.Requirements of version: Android 4.4, iOS 8.0, and later versions.2. 2.4G wireless router should connect to the Internet; smartphone should connect the Wi-Fi of the router. When connecting to the camera, both the smartphone and camera should be within the range of this wireless router.3.Download and install client-end APP3. Click to add equipment; (Fig. 3)Prompt: please use a valid and useable mailbox during user registration, for recovering the password.(Fig. 1) 1. Please connect the camera to power and switch it on; after switching on, its indicator light will be turned on and the camera will start auto-check. After finishing the auto-check, there will be “ding-dong” sound ringing. (Fig. 1) 2. machine will enter configuration mode.(Fig. 2) Press SET for 1 second, and after a “beep” sound, the 6.Select your WiFi, and input your WiFi password, and then click "Next" (Fig.6) 7.After two beeps, camera starts to configure the Wi-Fi connection. When the light turns green, it indicates the connection is established. After successful connection, the app will pop up list of connected camera (Fig. 7). Choose the item to enter real-time monitor. U-life Plus A.Open the App Store on iPhone/iPad, search for "U-life Plus" and install.Or scan the QR code to install it directly.U-life PlusB.Enter the "Google Play" store on Android smartphone. Search for "U-life Plus" and install.Or scan the QR code to install it directly. Camera Power adapter Power source5.Click the QR code icon and scan the QR code of the camera ID on the camera. After getting the device's ID, pls press "Next" (Fig. 5)4.Click “Add with WiFi". (Fig. 4)(Fig. 3) (Fig. 4) (Fig. 5) (Fig. 6) (Fig. 7) Pre-Installation PreparationAdd camera for multi-users1.If your cell phone APP has added camera and connected successfully, next time when others adds, You click "Share your camera to friends".and then there will be a QR code in your APP.You share this QR code to your friends. And he/she click "Add camera from friend" to scan the QR code you provided.(Fig.11 series)4.Open APP, register an ID first, then please login. (special characters （such as "%","\","<>" etc...） are not allowed.) Adding mode by WiFi 1.Power camera on > Press SET for 1 second > Click Add by scanning the QR code to add the camera > Scan device ID > Enter the name and password for access to WiFi. Perform operations as instructed. (Figure 8 series)2.When the mobile phone shows the QR code ,please place your phone in font of the camera (as shown in Figure 9). If it beeps, scanning succeeds, and then click on "Yes, I did".When the light turns green, it indicates the bonding is successful. (Fig.8 series)(Fig. 9) -6--10--11- - 12--13--9--14--15- Function Features Product SpecificationsImage sensor CMOS Camera resolutionCamera rotation range 270°horizontal, 120°verticalNight vision range ≤5mAudio sensitivity ≤-47dBOperation voltage ※ Packing ListIII V VII FCC/CE Certification Information Camera Power adapter Quick GuideUSB cable Troubleshooting The picture is only for reference and the real object shall prevailX No additional notice will be made in case of any minor change. Our company reserves the right of final interpretation.Operation humidity 15% ~ 85% RHSize (LxWxH) 85 x88.5 x103.5mmNet weight 224gOperation temperature -10℃ ~ + 50℃IV V IVII IIX With a successful connection, monitor view supports real-time monitoring, taking photos, recording videos, intercommunication, modifying setting and other operations.Monitor View and Operations Notes: 1.Photos and videos taken in the app will be saved in smartphone.2.Automatic photos and videos of movement detection will be saved in micro-SD card of camera.2.Open the APP, enter “User center” page to check APP version info etc. (Fig .14)3.Open the APP, enter “message” page to set message pushing. (Fig .15)Indicates that power failure or network not connected.Red indicator remainsRed indicator flashesIndicates that camera is connecting to network.Green indicator flashesIndicates the router connected successfully (no Internet).Green indicator remainsIndicates the camera is connected to server and working well.Camera Indicator Instruction i ) Ensure that there is no MAC filter on router or add MAC address to router whitelist j) We suggest rebooting the router, and the "security settings, encryption method" of WiFi password should never choose "auto-select". k ) Reset the camera to set up connection again. Press and hold SET key for 5 seconds. ※ This camera is compatible with universal APP, actual function is subject to camera.(Fig. 13) SettingsScrews (Fig. 14) (Fig. 15) 24/7 live video streamingHD provides excellent video qualitySmart motion detection and notificationAdvanced video recording on micro-SD card (Maximally support the cyclic recording of 64GB micro SD card.) Motorized Pan/TiltNight vision (5m visibility)Two-way voice transmitQuick & easy to set up2. Red indicator remains, network connection is failed. a) Ensure that the password of Wi-Fi is correct. b) Ensure that the network connects to Internet freely. c) Ensure that the camera is in range of Wi-Fi hotspot.5.Push message: when movement is detected, alarm message can be sent to server and pushed to your phone.6.Remote monitoring: after the camera is connected to Internet successfully, app can view the monitor via Internet, anytime, anywhere.7.Temperature alarm: In case that the temperature detected by the device is higher than the set value, audible alarm will be activated on cell phone (once every 2 minutes). 3. Green indicator flashes, connection to server failed. a) Ensure that Wi-Fi signal is strong enough and bandwidth is enough for connection. Move near to Wi-Fi hotspot or increase the bandwidth. b) Ensure that camera is not under interferon of other 2.4GHz signal. Tips1.Suggest using qualified micro-SD card to avoid incompatibility. Format micro-SD card before using.2.Movement detection: when movement is detected within the scope of camera, the camera will record video and take photos automatically. Videos and photos will be saved in micro-SD card.1. Wi-Fi cannot be connected a) Ensure that the antenna of camera is fixed well. b) Ensure that camera is in range of router. Keep the distance less than 40fts between router and indoor camera, less than 65fts for outdoor camera. c) Ensure that SSID and password of Wi-Fi contains no special characters. Modify the SSID and password of Wi-Fi with only English characters, no special characters. d) Ensure that SSID and password are no longer than 16 characters Model No.(Fig. 12) 1.Click to switch between standard definition and high definition of real-time video.2.Click to enter multi-video view, monitor at most 4 real- time video.3.Click to start recording video, click again to stop recording. Video will be saved in smartphone.4.Drag to adjust camera view angle.5.Click and hold the button to transmit voice to camera. While holding the button, the audio from camera will be mute.6.Click to enter setting7.Click to view and download photos & videos saved in camera micro-SD card.8.Click to take a photo. Photo will be saved in smartphone.9.Click to mute the audio from camera. Click again to cancel.1.On the real-time monitoring interface, click the setting icon for entering into the camera setting menu. The user can set up the relevant functions for the “Camera time check’ and others. (Fig. 13) 5134786299.When this machine has a crash fault or other abnormal conditions influencing the usage, it is recommended to cut out the power and restart; or press SET key for 10 seconds, which can restore factory settings, and then please reconnect the router. g) Ensure that Wi-Fi encryption method is WPA2-PSK/ WPA-PSK or AES. h) Ensure that Wi-Fi signal is 2.4GHz.-7-中国移 动 上午11:50My Ce nterDecice List MessageMy de vice中国移 动 上午11:50My CenterDecice List MessageMy de viceThe default ipcamera can be modified. e) Ensure that SSID is broadcasted. f ) Ensure that the DHCP is enabled on router. Adding mode by scanning the QR code 8.Only support the special characters in English mode, such as: " @, #, &, *, ~, ｛, ｝, -, =, +, /, ?, (, )", Dont support the special characters, such as:"%", "\", "<>". There are two ways to add the camera function in Mobile APP, namely, "adding mode by WiFi " and "adding mode by scanning the QR code ". (Fig.11 series)(Fig.10) 1.In setting page of app (Fig. 10), click “Delete device” to remove the connected camera, can remove the bonding with the account. then others can add the camera freely.Delete device10~15cm3.Share your camera to friends: Share QR code of the device with your friends.4.Cancel "Share your camera to friends": Delete the camera and cancel "Sharing your camera to friends". (You have to re-add the camera to use it again) 1080P:1920x1080 720P:1280x720 T5886HCA T5886HAA/GAAT5886GCADC+5V/2A DC+5V/1AShare your camera to friendsThe Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Hereby, we declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EN.Notice: Observe the national local regulations in the location where the device Is to be used. This device may be restricted for use in some or all member states of the European Union (EU)NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:EU Environmental ProvisionsE-waste cannot be mixed with household garbage; corresponding local government sector or recycling stations shall be responsible for circular process.- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed exposure conditions. The min separation distance is 20cm.

Navigation menu