Gospell Smarthome Electronic T5886HCA HD WiFi Camera User Manual
Shenzhen Gospell Smarthome Electronic Co., Ltd. HD WiFi Camera
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3468533 |
| Application ID | YXnzQzlG/CxoiDEYELhAdQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 205.66kB (2570739 bits) |
| Date Submitted | 2017-07-18 00:00:00 |
| Date Available | 2017-07-18 00:00:00 |
| Creation Date | 2017-06-02 16:40:15 |
| Producing Software | Corel PDF Engine Version 15.1.0.588 |
| Document Lastmod | 2017-07-06 18:07:04 |
| Document Title | 10705012501 T5886-英文说明书20170602.cdr |
| Document Creator | CorelDRAW X5 |
| Document Author: | zzpalj |
HD WiFi Camera Quick Start Guide Model: T5886HCA Folding Schematic Before using the product, please read the guide carefully to avoid any damages to the product in virtue of faulty operation or misuse. Front side 汪敏 2017.06.02 新版本 变 更 时 间 2017.06.02 说明： 中文说明书 T5886HCA 电 子 档1: 1 中性 1.1 变更前 80x110mm 640x110mm 1 0 5 g铜 版 纸 双面四色印刷 工艺：风琴折，封面在外 其他：16P 变更后 技术规格部份有更改 内存改为64GB HD WiFi Camera II Appearance 4.Open APP, register an ID first, then please login. (special characters （such as "%","\","<>" etc...） are not allowed.) Installation Pre-Installation Preparation Light sensor Camera Lens Microphone 1.Requirements of version: Android 4.4, iOS 8.0, and later versions. 2. 2.4G wireless router should connect to the Internet; smartphone should connect the Wi-Fi of the router. When connecting to the camera, both the smartphone and camera should be within the range of this wireless router. 3.Download and install client-end APP A.Open the App Store on iPhone/iPad, search for "U-life Plus" and install.Or scan the QR code to install it directly. There are two ways to add the camera function in Mobile APP, namely, "adding mode by WiFi " and "adding mode by scanning the QR code ". Adding mode by WiFi 1. Please connect the camera to power and switch it on; after switching on, its indicator light will be turned on and the camera will start auto-check. After finishing the auto-check, there will be “ding-dong” sound ringing. (Fig. 1) 2. Press SET for 1 second, and after a “beep” sound, the machine will enter configuration mode.(Fig. 2) Adding mode by scanning the QR code 1.Power camera on > Press SET for 1 second > Click Add by scanning the QR code to add the camera > Scan device ID > Enter the name and password for access to WiFi. Perform operations as instructed. (Figure 8 series) 中国移动 2.When the mobile phone shows the QR code ,please place your phone in font of the camera (as shown in Figure 9). If it beeps, scanning succeeds, and then click on "Yes, I did" . When the light turns green, it indicates the bonding is successful. 10~15cm 上午11:50 My device (Fig. 9) Power adapter Camera Power source Decice List B.Enter the "Google Play" store on Android smartphone. Search for "U-life Plus" and install.Or scan the QR code to install it directly. 中国移动 My Center (Fig.8 series) The default ipcamera can be modified. 3. Click to add equipment; (Fig. 3) 4.Click “Add with WiFi". (Fig. 4) U-life Plus Message Delete device 1.In setting page of app (Fig. 10), click “Delete device” to remove the connected camera, can remove the bonding with the account. then others can add the camera freely. (Fig. 2) (Fig. 1) Antenna 5.Click the QR code icon and scan the QR code of the camera ID on the camera. After getting the device's ID, pls press "Next" (Fig. 5) 6.Select your WiFi, and input your WiFi password, and then click "Next" (Fig.6) 7.After two beeps, camera starts to configure the Wi-Fi connection. When the light turns green, it indicates the connection is established. After successful connection, the app will pop up list of connected camera (Fig. 7). Choose the item to enter real-time monitor. 上午11:50 My device (Fig. 5) (Fig. 6) (Fig. 7) Thermo sensitive induction Quick Start Guide Micro SD card slot SET key Model: T5886HCA Indicator light Power adapter port Before using the product, please read the guide carefully to avoid any damages to the product in virtue of faulty operation or misuse. U-life Plus ※Take the operation of Android client-end as example, and refer to Android client-end for IOS client-end. -1- Add camera for multi-users 1.If your cell phone APP has added camera and connected successfully, next time when others adds, You click "Share your camera to friends".and then there will be a QR code in your APP.You share this QR code to your friends. And he/she click "Add camera from friend" to scan the QR code you provided.(Fig.11 series) III Monitor View and Operations With a successful connection, monitor view supports real-time monitoring, taking photos, recording videos, intercommunication, modifying setting and other operations. Share your camera to friends Decice List 9.Click to mute the audio from camera. Click again to cancel. Notes: 1.Photos and videos taken in the app will be saved in smartphone. 2.Automatic photos and videos of movement detection will be saved in micro-SD card of camera. Settings 1.On the real-time monitoring interface, click the setting icon for entering into the camera setting menu. The user can set up the relevant functions for the “Camera time check’ and others. (Fig. 13) 2.Open the APP, enter “User center” page to check APP version info etc. (Fig .14) 3.Open the APP, enter “message” page to set message pushing. (Fig .15) IV Red indicator remains Indicates that power failure or network not connected. Red indicator flashes Indicates that camera is connecting to network. Green indicator flashes Green indicator remains Indicates the router connected successfully (no Internet). Indicates the camera is connected to server and working well. -8- -9- CMOS 1080P:1920x1080 DC+5V/2A DC+5V/1A -10℃ ~ + 50℃ 15% ~ 85% RH 85 x88.5 x103.5mm Net weight - 10- 720P:1280x720 270°horizontal, 120°vertical ≤5m ≤-47dB Operation humidity ※ This camera is compatible with universal APP, actual function is subject to camera. Packing List T5886HCA T5886GCA T5886HAA/GAA Operation temperature (Fig. 15) Function Features Product Specifications Operation voltage (Fig. 14) - 5- 24/7 live video streaming HD provides excellent video quality Smart motion detection and notification Advanced video recording on micro-SD card (Maximally support the cyclic recording of 64GB micro SD card.) Motorized Pan/Tilt Night vision (5m visibility) Two-way voice transmit Quick & easy to set up VII Camera rotation range Night vision range Audio sensitivity Size (LxWxH) VI 224g ※ No additional notice will be made in case of any minor change. Our company reserves the right of final interpretation. -11- Camera USB cable Power adapter Screws Quick Guide The picture is only for reference and the real object shall prevail VII I (Fig.10) (Fig. 4) - 4- Camera Indicator Instruction Model No. (Fig. 13) My Center (Fig. 3) Image sensor Camera resolution (Fig. 12) 1.Click to switch between standard definition and high definition of real-time video. 2.Click to enter multi-video view, monitor at most 4 realtime video. 3.Click to start recording video, click again to stop recording. Video will be saved in smartphone. 4.Drag to adjust camera view angle. 5.Click and hold the button to transmit voice to camera. While holding the button, the audio from camera will be mute. 6.Click to enter setting 7.Click to view and download photos & videos saved in camera micro-SD card. 8.Click to take a photo. Photo will be saved in smartphone. Message -3- - 2- (Fig.11 series) Prompt: please use a valid and useable mailbox during user registration, for recovering the password. 3.Share your camera to friends: Share QR code of the device with your friends. 4.Cancel "Share your camera to friends": Delete the camera and cancel "Sharing your camera to friends". (You have to re-add the camera to use it again) 5.Push message: when movement is detected, alarm message can be sent to server and pushed to your phone. 6.Remote monitoring: after the camera is connected to Internet successfully, app can view the monitor via Internet, anytime, anywhere. 7.Temperature alarm: In case that the temperature detected by the device is higher than the set value, audible alarm will be activated on cell phone (once every 2 minutes). 8.Only support the special characters in English mode, such as: " @, #, &, *, ~, ｛, ｝, -, =, +, /, ?, (, )", Dont support the special characters, such as:"%", "\", "<>". 9.When this machine has a crash fault or other abnormal conditions influencing the usage, it is recommended to cut out the power and restart; or press SET key for 10 seconds, which can restore factory settings, and then please reconnect the router. Tips 1.Suggest using qualified micro-SD card to avoid incompatibility. Format micro-SD card before using. 2.Movement detection: when movement is detected within the scope of camera, the camera will record video and take photos automatically. Videos and photos will be saved in micro-SD card. - 12- -13- -7- -6- IX Troubleshooting 1. Wi-Fi cannot be connected a) Ensure that the antenna of camera is fixed well. b) Ensure that camera is in range of router. Keep the distance less than 40fts between router and indoor camera, less than 65fts for outdoor camera. c) Ensure that SSID and password of Wi-Fi contains no special characters. Modify the SSID and password of Wi-Fi with only English characters, no special characters. d) Ensure that SSID and password are no longer than 16 characters e) Ensure that SSID is broadcasted. f ) Ensure that the DHCP is enabled on router. g) Ensure that Wi-Fi encryption method is WPA2-PSK/ WPA-PSK or AES. h) Ensure that Wi-Fi signal is 2.4GHz. i ) Ensure that there is no MAC filter on router or add MAC address to router whitelist j ) We suggest rebooting the router, and the "security settings, encryption method" of WiFi password should never choose "auto-select". k ) Reset the camera to set up connection again. Press and hold SET key for 5 seconds. 2. Red indicator remains, network connection is failed. a) Ensure that the password of Wi-Fi is correct. b) Ensure that the network connects to Internet freely. c) Ensure that the camera is in range of Wi-Fi hotspot. 3. Green indicator flashes, connection to server failed. a) Ensure that Wi-Fi signal is strong enough and bandwidth is enough for connection. Move near to Wi-Fi hotspot or increase the bandwidth. b) Ensure that camera is not under interferon of other 2.4GHz signal. -14- FCC/CE Certification Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Hereby, we declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EN. Notice: Observe the national local regulations in the location where the device I s to be used. This device may be restricted for use in some or all member states of the European Union (EU) EU Environmental Provisions E-waste cannot be mixed with household garbage; corresponding local government sector or recycling stations shall be responsible for circular process. -15- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed exposure conditions. The min separation distance is 20cm.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : zzpalj Create Date : 2017:06:02 16:40:15+08:00 Modify Date : 2017:07:06 18:07:04+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : zzpalj Title : 10705012501 T5886-英文说明书20170602.cdr Creator Tool : CorelDRAW X5 Metadata Date : 2017:07:06 18:07:04+08:00 Producer : Corel PDF Engine Version 15.1.0.588 Document ID : uuid:962d12f8-0354-4dcc-a923-3b12aa3469ea Instance ID : uuid:c8681c41-b104-4f94-b128-adbaacc38d39 Page Count : 3 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools