Gospell Smarthome Electronic U5826Y-T5826Y HD WiFi Camera User Manual 10705012453 U5826Y manual 2

Shenzhen Gospell Smarthome Electronic Co., Ltd. HD WiFi Camera 10705012453 U5826Y manual 2

15_T5826Y UserMan.pdf

Folding Schematic Front sideHD WiFi Camera Model: U5826YProduct Quick GuideVersion No.: 1.1Before using the product, please read the guide carefully to avoidany damages to the product in virtue of faulty operation or misuse.
135 87 1234578 9 10 116HD WiFi Camera Model: U5826YProduct Quick GuideVersion No.: 1.1Before using the product, please read the guide carefully to avoidany damages to the product in virtue of faulty operation or misuse.Appearance(The front)Setup(Press 'SET'button by a needle)Micro SD card slotMIC holeDC5V power socketScrew hanger hole(first nail the screw on the wall and then hanger the camera on the screw.)(The back)2 Installation InstructionsDownload and install client-end APP1.For iPhone/iPad client-end: open App Store,search for “QQI”, click Download Link for downloading and installation.2. For Android client-end: enter “Google Play” Store, search for “QQI”, click Download Link for downloading and installation. QQIQQIQQIUser registrationPlease register after installing the APP. Link powerPlease adopt standard DC5V power adapter for connection of power supply. The red light is on after being powered on, keep on after 5 flickers, and ding –dong indicates completion of starting up. Camera Network Connecting Device(Before connection: wireless router normally connects to the network and then connect the WiFi of cellphone to this router. When connecting to the camera, it should be within the scope of this wireless router.) ※ take the client of Android cellphone as the example. For iOS client, please refer to Android client. 1.Upon ding –dong of starting up, short press the setting button of the camera, it beep, the red light flickers, enter smart connection mode. Then log in APP, click “+” for addition of device, and operate following prompts: 3.When the mobile phone is in the interface of QR code, it is necessary to put the camera aside the mobile phone for the time being.4. After connected to the network platform, pull down the client to refresh the device list. Click the camera lens and enter monitoring video interface and have the various manipulations of the camera lens.If new lens does not appear, please click here to pull down and refresh.Check Video and Manipulate1. After successfully connected to, enter into the connected camera lens and check video etc.2. Shoot, recording, setup or check event list in the intelligent client.Note: 1.Pictures taken manually with intelligent client-end are saved on the intelligent client-end. 2.Automatic photographing and video files of manual vide and motion detection are saved on the micro SD card of camera.Setting1 Click the icon on the real-time monitoring interface to enter the setting menu of camera. Users may change relevant parameters.Function Characteristics High-definition, intelligent and remote real-time monitoring. Camera network connectionIOS and Android system can be used. Shooting/recording/storage/playback Motion detection function32GB micro SD card cyclic recording can be used in maximum.6 Technical ParametersImaging sensor: 1/4 inch CMOSCamera resolution: 720P high definitionVisual angle: level 70°Night visual range: ≤5mWorking voltage: DC +5V /1AWorking temperature: 0℃ ~+40℃Dimension (LxWxH): 80x80x118mm Weight:104g※Any small changes to all parameters will be done without prior notice.Package List Please confirm the following fittings after unpacking Camera Power adapter Instruction manual Wall nails Screws The picture is only for reference and the real object shall prevailHD Wi Fi Came ra Model: U5826YProdu ct Quic k GuideVersion No.: 1.0Before using the product, please read the guide carefully to avoidany damages to the product in virtue of faulty operation or misuse. Warm prompt1. After successful connection to camera network, theuser ID is bounded to the camera. 2. After your user ID is bounded to the camera, other ID cannot be added unless you unbind the bounded ID. 3. After your user ID is bounded to the camera, you can check the monitoring by remote and real time network on the smart client-end with this ID.4. In the starting up state of the camera, press extendedly the 'set-up 'button by a needle until the pilot lamp is put out. Then the device can be removed from the account, leading to successful release of thebinding.FCC Certification Information10 BasePhotosensitive inductionLensPilot lampBaseSupportAfter the holder is put in the lampstand, twist downward; twist the holder to the left, then it closes. closeAfter the holder is put in the lampstand, twist downward; twist the holder to the right, then it opens. open2.Please input the name and password of your WiFi:4Definition of status of indicator lightKindly Remind: Due to the software used is a general-purpose software, this function has no effect.Definition of status of video camera's indicator light Course of powering on startLink red light keeps on after flashing 5 timesCourse of intelligent scanning of QR code Link red light flashingLink green light flashingSetting of WiFi statusSuccessful connectionto network platform (In network connection mode)Link green light keeps on 1.The red light is on normally, indicating networking fails. Method①: Check whether input SSID and the password are correct or not. Method ②: Guarantee that the network is usable, and the equipment is moved near the router. 2.The green light flashes normally, indicating connection to the server fails. Method ①: (wifi signal is weak or the bandwidth is not enough) Please move to the position where wifi signals are stronger or the bandwidth is increased. Method ②: Check whether there is 2.4G interference all round. 3.While adding, the system indicates that the operation is successful, but it is not found in the list. Method ①: Exit from the APP and the log in again. Solutions to common problems:4.Unable to bind, and be bound by other usersMethod ①: Press SET key until the light goes out. Install again after auto reboot, and bind successfully. 12 139※This product adopts the general APP, and actual functions are subject to the equipment terminal. Two beeps are made upon successful Smart scanning, and when the green light keeps on, it shows successful connection to network platform. NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC rules. Operation is subject to the following twoconditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may causeundesired operation.Changes or modifications to this unit not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.

Navigation menu