Gospell Smarthome Electronic U5826Y-T5826Y HD WiFi Camera User Manual 10705012453 U5826Y manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3034944
Application ID	xnkR52IvWChGZCAhWtFdLQ==
Document Description	15_T5826Y UserMan.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	116.88kB (1460994 bits)
Date Submitted	2016-06-21 00:00:00
Date Available	2016-06-21 00:00:00
Creation Date	2016-03-11 17:52:55
Producing Software	Corel PDF Engine Version 15.1.0.588
Document Lastmod	2016-03-11 17:52:55
Document Title	10705012453 U5826Y说明书-manual-2.cdr
Document Creator	CorelDRAW X5
Document Author:	zzpalj

HD WiFi Camera
Product Quick Guide
Model: U5826Y
Folding Schematic
Front side
Version No.: 1.1
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
1
HD WiFi Camera
Appearance
User registration
Installation Instructions
Download and install client-end APP
Photosensitive
induction
1.For iPhone/iPad client-end: open App Store,search
for “QQI”, click Download Link for downloading and
installation.
Setup(Press 'SET'
button by a needle)
Lens
3.When the mobile phone is in the interface of QR
code, it is necessary to put the camera aside the
mobile phone for the time being.
Two beeps are made upon successful Smart scanning,
and when the green light keeps on, it shows successful
connection to network platform.
Camera Network Connecting Device
(Before connection: wireless router normally connects
to the network and then connect the WiFi of cellphone
to this router. When connecting to the camera, it
should be within the scope of this wireless router.)
Please register after
installing the APP.
※ take the client of Android cellphone as the example.
For iOS client, please refer to Android client.
1.Upon ding –dong of starting up, short press the
setting button of the camera, it beep, the red light
flickers, enter smart connection mode. Then log in
APP, click “+” for addition of device, and operate
following prompts:
Micro SD card slot
Pilot lamp
QQI
MIC hole
DC5V power socket
QQI
Screw hanger hole
(first nail the screw
on the wall and then
hanger the camera
on the screw.)
Support
Base
Product Quick Guide
2.Please input the name and password of your WiFi:
(The front)
Model: U5826Y
Setting
Check Video and Manipulate
1 Click the icon
on the real-time monitoring
interface to enter the setting menu of camera. Users
may change relevant parameters.
1. After successfully connected to, enter into the
connected camera lens and check video etc.
2. Shoot, recording, setup or check event list in the
intelligent client.
If new lens does not
appear, please click
here to pull down and
refresh.
QQI
After the holder is put in the
lampstand, twist downward;
twist the holder to the right,
then it opens.
open
Version No.: 1.1
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
Please adopt standard DC5V power adapter for
connection of power supply. The red light is on after
being powered on, keep on after 5 flickers, and ding
–dong indicates completion of starting up.
(The back)
After the holder is put in the
lampstand, twist downward;
twist the holder to the left,
then it closes.
close
4. After connected to the network platform, pull down
the client to refresh the device list. Click the camera
lens and enter monitoring video interface and have
the various manipulations of the camera lens.
Link power
2. For Android client-end: enter “Google Play” Store,
search for “QQI”, click Download Link for
downloading and installation.
Function Characteristics
High-definition, intelligent and remote real-time
monitoring.
Camera network connection
IOS and Android system can be used.
Shooting/recording/storage/playback
Motion detection function
32GB micro SD card cyclic recording can be used
in maximum.
Package List
Base
Power adapter
4. In the starting up state of the camera, press
extendedly the 'set-up 'button by a needle until the
pilot lamp is put out. Then the device can be removed
from the account, leading to successful release of the
binding.
HD WiFi Camera
Kindly Remind:
Due to the software used
is a general-purpose
software, this function
has no effect.
Definition of status of video camera's indicator light
Note: 1.Pictures taken manually with intelligent clientend are saved on the intelligent client-end.
2.Automatic photographing and video files of manual
vide and motion detection are saved on the micro SD
card of camera.
Link red light keeps on after
flashing 5 times
Course of intelligent
scanning of QR code
Link red light flashing
Setting of WiFi status
Link green light flashing
Successful connection
to network platform (In
Link green light keeps on
network connection mode)
Product Quick Guide
Model: U5826Y
Version No.: 1.0
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
Imaging sensor: 1/4 inch CMOS
Camera resolution: 720P high definition
Visual angle: level 70°
Night visual range: ≤5m
Working voltage: DC +5V /1A
Working temperature: 0℃ ~+40℃
Dimension (LxWxH): 80x80x118mm
Weight:104g
Definition of status
of indicator light
Course of powering
on start
Technical Parameters
Instruction manual
Wall nails
Screws
1.The red light is on normally, indicating networking
fails.
Method①: Check whether input SSID and the
password are correct or not.
Method ②: Guarantee that the network is usable, and
the equipment is moved near the router.
FCC Certification Information
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
2.The green light flashes normally, indicating
connection to the server fails.
Method ①: (wifi signal is weak or the bandwidth is not
enough) Please move to the position where wifi signals
are stronger or the bandwidth is increased.
Method ②: Check whether there is 2.4G interference
all round.
4.Unable to bind, and be bound by other users
Method ①: Press SET key until the light goes out. Install
again after auto reboot, and bind successfully.
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
※This product adopts the general APP, and actual
functions are subject to the equipment terminal.
※Any small changes to all parameters will be done
without prior notice.
10
Solutions to common
problems:
3.While adding, the system indicates that the operation
is successful, but it is not found in the list.
Method ①: Exit from the APP and the log in again.
The picture is only for reference and the real object shall prevail
Warm prompt
1. After successful connection to camera network, the
user ID is bounded to the camera.
2. After your user ID is bounded to the camera, other
ID cannot be added unless you unbind the bounded ID.
3. After your user ID is bounded to the camera, you can
check the monitoring by remote and real time network
on the smart client-end with this ID.
Please confirm the following fittings after unpacking
Camera
10
11
12
13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 2
Create Date                     : 2016:03:11 17:52:55+08:00
Modify Date                     : 2016:03:11 17:52:55+08:00
Producer                        : Corel PDF Engine Version 15.1.0.588
Author                          : zzpalj
Creator                         : CorelDRAW X5
Title                           : 10705012453  U5826Y说明书-manual-2.cdr

EXIF Metadata provided by EXIF.tools