Gospell Smarthome Electronic Y5703 HD WiFi Camera User Manual Y5703GAA

Download:
Mirror Download [FCC.gov]
Document ID	4022636
Application ID	7EPCtbt4ZgmNdp09RlwKdA==
Document Description	15_Y5703GAA UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.54kB (581723 bits)
Date Submitted	2018-09-28 00:00:00
Date Available	2018-09-28 00:00:00
Creation Date	2018-08-23 16:42:47
Producing Software	Corel PDF Engine Version 17.1.0.572
Document Lastmod	2018-08-23 16:47:49
Document Title	Y5703GAA_说明书 英文.cdr
Document Creator	CorelDRAW X7
Document Author:	zzpalj

HD WiFi Camera
Packing List
Appearance
HD WiFi Camera
Technical Parameters
Installation
1/4",CMOS
100W pixels
Light sensor
Imaging sensor
Effective pixel
Horizontal viewing angle
85±5°
Camera lens
Wireless transmission way
WiFi
3. Download APP: Scan the QR code below and complete the
installation
LED indicating lamp
Transmission Range
Interface
Indoor: 20m
Set Button Micro USB
Support Android and IOS
Remote monitor
Power supply
Quick Start Guide
5V 1A, DC
※
All parameters change without prior notice, The finial right of
interpretation is reserved by the company.
Model: T5703GAB
正面
1. 2.4G wireless router is required.
2. Support Android 4.4 and above, iOS 8.0 and above
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
User manual
Camera
Set button
Android
Loudspeaker
4. Add a device: Open the APP home page.click the “Add Device”
icon to connect your camera. According to the settings guide
in the APP, you can configure multiple cameras at the same
time.
MIC hole
USB cable
Power adapter
Screws
USB port
Quick Start Guide
Model: Y5703GAA
※ The picture is only for reference and the real object shall prevail
IOS
Base
Before using the product, please read the guide carefully to avoid
any damages to the product in virtue of faulty operation or misuse.
-01-
Connect to the power supply
1. Find the power interface behind the product and power on the
camera,The indicator will turn on.
2. Please make sure there is WiFi available.
Tips
1.Suggest using qualified micro-SD card to avoid
incompatibility. Format micro-SD card before using.
2.In setting page of app (Fig. 11), click “Delete device” to
remove the connected camera, can remove the bonding
with the account.
3.Movement detection: when movement is detected within
the scope of camera, the camera will record video and take
photos automatically. Videos and photos will be saved in
micro-SD card.
4.Sharing with Friends: Share your QR code to your friends.
反面
5.Cancel"sharing with friends": Delete the camera and cancel
"sharing with friends". (You have to re-add the camera to
use it again)
6.Push message: when movement is detected, alarm message
can be sent to server and pushed to your phone.
Camera Indicator Instruction
Red indicator
remains
Indicates that power failure or network
not connected.
Red indicator
flashes
Indicates that camera is connecting to
network.
Green indicator
flashes
Indicates the router connected
successfully (no Internet).
Green indicator
remains
Indicates the camera is connected to
server and working well.
-05-
-02-
7.Remote monitoring: after the camera is connected to Internet
successfully, you can monitor your home anywhere ,anytime.
8.Only support the special characters in English mode,
such as: " @, #, &, *, ~, ｛, ｝, -, =, +, /, ?, (, )", 



Dont support the special characters, such as:"%", "\", "<>".
9.When this machine has a crash fault or other abnormal
conditions influencing the usage, it is recommended to
cut out the power and restart; or press SET key for 10
seconds, which can restore factory settings, and then
please reconnect the router.
-06-
Troubleshooting
1. Wi-Fi cannot be connected
a) Ensure that the antenna of camera is fixed well.
b) Ensure that camera is in range of router. Keep the
distance less than 40fts between router and indoor
camera, less than 65fts for outdoor camera.
c) Ensure that SSID and password of Wi-Fi contains no
special characters. Modify the SSID and password of
Wi-Fi with only English characters, no special characters.
d) Ensure that SSID and password are no longer than 16
characters
e) Ensure that SSID is broadcasted.
f ) Ensure that the DHCP is enabled on router.
g) Ensure that Wi-Fi encryption method is WPA2-PSK/
WPA-PSK or AES.
h) Ensure that Wi-Fi signal is 2.4GHz.
i ) Ensure that there is no MAC filter on router or add
MAC address to router whitelist
j ) We suggest rebooting the router, and the "security
settings, encryption method" of WiFi password should
never choose "auto-select".
k ) Reset the camera to set up connection again. Press
and hold SET key for 5 seconds.
2. Red indicator remains, network connection is failed.
a) Ensure that the password of Wi-Fi is correct.
b) Ensure that the network connects to Internet freely.
c) Ensure that the camera is in range of Wi-Fi hotspot.
3. Green indicator flashes, connection to server failed.
a) Ensure that Wi-Fi signal is strong enough and
bandwidth is enough for connection. Move near to
Wi-Fi hotspot or increase the bandwidth.
b) Ensure that camera is not under interferon of other
2.4GHz signal.
-07-
-03-
FCC/CE Certification Information
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1)this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
The Maximum Permissible Exposure (MPE) level has been calculated
based on a distance of d=20 cm between the device and the human body.
To maintain compliance with RF exposure requirement, use product that
maintain a 20cm distance between the device and human body. Hereby,
we declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
Notice: Observe the national local regulations in the location where the
device is to be used. This device may be restricted for use in some or all
member states of the European Union (EU).
-08-
-04-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : zzpalj
Create Date                     : 2018:08:23 16:42:47+08:00
Modify Date                     : 2018:08:23 16:47:49+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : zzpalj
Title                           : Y5703GAA_说明书 英文.cdr
Creator Tool                    : CorelDRAW X7
Metadata Date                   : 2018:08:23 16:47:49+08:00
Producer                        : Corel PDF Engine Version 17.1.0.572
Document ID                     : uuid:afd51da0-e5cd-4658-b406-39152302f20a
Instance ID                     : uuid:c9b2d312-04d9-4099-8230-30858c74afbb
Page Count                      : 1
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools